Commit Graph

8 Commits

Author SHA1 Message Date
Steven Rostedt (Red Hat)
d8a30f2034 tracing: Fix rcu handling of event_trigger_data filter field
The filter field of the event_trigger_data structure is protected under
RCU sched locks. It was not annotated as such, and after doing so,
sparse pointed out several locations that required fix ups.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-02 16:17:22 -05:00
Steven Rostedt (Red Hat)
098c879e1f tracing: Add generic tracing_lseek() function
Trace event triggers added a lseek that uses the ftrace_filter_lseek()
function. Unfortunately, when function tracing is not configured in
that function is not defined and the kernel fails to build.

This is the second time that function was added to a file ops and
it broke the build due to requiring special config dependencies.

Make a generic tracing_lseek() that all the tracing utilities may
use.

Also, modify the old ftrace_filter_lseek() to return 0 instead of
1 on WRONLY. Not sure why it was a 1 as that does not make sense.

This also changes the old tracing_seek() to modify the file pos
pointer on WRONLY as well.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-02 16:17:12 -05:00
Tom Zanussi
bac5fb97a1 tracing: Add and use generic set_trigger_filter() implementation
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.

Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger.  For example, to add a filter to an
enable/disable_event command:

    echo 'enable_event:system:event if common_pid == 999' > \
              .../othersys/otherevent/trigger

The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.

As another example, to add a filter to a stacktrace command:

    echo 'stacktrace if common_pid == 999' > \
                   .../somesys/someevent/trigger

The above command will only trigger a stacktrace if the common_pid
field in the event is 999.

The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.

Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.

There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.

There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers.  To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger.  Once all commands have been either invoked or set their
return flag, event_triggers_call() returns.  The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().

To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.

The syscall event invocation code is also changed in analogous ways.

Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.

Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:17 -05:00
Tom Zanussi
7862ad1846 tracing: Add 'enable_event' and 'disable_event' event trigger commands
Add 'enable_event' and 'disable_event' event_command commands.

enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:

    echo 'enable_event:system:event' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event' > .../othersys/otherevent/trigger

The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.

This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.

Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:16 -05:00
Tom Zanussi
f21ecbb35f tracing: Add 'stacktrace' event trigger command
Add 'stacktrace' event_command.  stacktrace event triggers are added
by the user via this command in a similar way and using practically
the same syntax as the analogous 'stacktrace' ftrace function command,
but instead of writing to the set_ftrace_filter file, the stacktrace
event trigger is written to the per-event 'trigger' files:

    echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger

The above command will turn on stacktraces for someevent i.e. whenever
someevent is hit, a stacktrace will be logged.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above command will log N stacktraces for someevent i.e. whenever
someevent is hit N times, a stacktrace will be logged.

Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:15 -05:00
Tom Zanussi
93e31ffbf4 tracing: Add 'snapshot' event trigger command
Add 'snapshot' event_command.  snapshot event triggers are added by
the user via this command in a similar way and using practically the
same syntax as the analogous 'snapshot' ftrace function command, but
instead of writing to the set_ftrace_filter file, the snapshot event
trigger is written to the per-event 'trigger' files:

    echo 'snapshot' > .../somesys/someevent/trigger

The above command will turn on snapshots for someevent i.e. whenever
someevent is hit, a snapshot will be done.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'snapshot:N' > .../somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above command will snapshot N times for someevent i.e. whenever
someevent is hit N times, a snapshot will be done.

Also adds a new tracing_alloc_snapshot() function - the existing
tracing_snapshot_alloc() function is a special version of
tracing_snapshot() that also does the snapshot allocation - the
snapshot triggers would like to be able to do just the allocation but
not take a snapshot; the existing tracing_snapshot_alloc() in turn now
also calls tracing_alloc_snapshot() underneath to do that allocation.

Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
[ fix up from kbuild test robot <fengguang.wu@intel.com report ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:01:22 -05:00
Tom Zanussi
2a2df32115 tracing: Add 'traceon' and 'traceoff' event trigger commands
Add 'traceon' and 'traceoff' event_command commands.  traceon and
traceoff event triggers are added by the user via these commands in a
similar way and using practically the same syntax as the analagous
'traceon' and 'traceoff' ftrace function commands, but instead of
writing to the set_ftrace_filter file, the traceon and traceoff
triggers are written to the per-event 'trigger' files:

    echo 'traceon' > .../tracing/events/somesys/someevent/trigger
    echo 'traceoff' > .../tracing/events/somesys/someevent/trigger

The above command will turn tracing on or off whenever someevent is
hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
    echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will turn tracing on or off whenever someevent
is hit, but only N times.

Some common register/unregister_trigger() implementations of the
event_command reg()/unreg() callbacks are also provided, which add and
remove trigger instances to the per-event list of triggers, and
arm/disarm them as appropriate.  event_trigger_callback() is a
general-purpose event_command func() implementation that orchestrates
command parsing and registration for most normal commands.

Most event commands will use these, but some will override and
possibly reuse them.

The event_trigger_init(), event_trigger_free(), and
event_trigger_print() functions are meant to be common implementations
of the event_trigger_ops init(), free(), and print() ops,
respectively.

Most trigger_ops implementations will use these, but some will
override and possibly reuse them.

Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 18:40:24 -05:00
Tom Zanussi
85f2b08268 tracing: Add basic event trigger framework
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.

'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.

The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.

The event trigger functionality is built on top of SOFT_DISABLE
functionality.  It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires.  Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that.  Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function.  Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.

The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.

The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.

The standard open, read, and release file operations are implemented
here.

The open() implementation sets up for the various open modes of the
'trigger' file.  It creates and attaches the trigger iterator and sets
up the command parser.  If opened for reading set up the trigger
seq_ops.

The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.

The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.

A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.

also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.

A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations.  They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.

The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event.  It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.

Every event_command func() implementation essentially does the
same thing for any command:

   - choose ops - use the value of param to choose either a number or
     count version of event_trigger_ops specific to the command
   - do the register or unregister of those ops
   - associate a filter, if specified, with the triggering event

The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized.  When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite.  The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.

Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.

The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions.  This allows func()
implementations to use command-specific blobs and supports code
re-use.

The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked.  The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.

This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.

Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 18:40:22 -05:00