The altera EDAC driver refers to its per-device data
using a cast to '(void *)', which makes the pointer
non-const, though both the source and destination are
actually const.
Removing the annotation makes the reference (almost)
fit into a single line for improved readability, and
ensures that it is actually defined as const.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: Alan Tull <atull@opensource.altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1460837650-1237650-1-git-send-email-arnd@arndb.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Pull RAS updates from Ingo Molnar:
"Various RAS updates:
- AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
MCA) error decoding support (Aravind Gopalakrishnan)
- x86 memcpy_mcsafe() support, to enable smart(er) hardware error
recovery in NVDIMM drivers, based on an extension of the x86
exception handling code. (Tony Luck)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/sb_edac: Fix computation of channel address
x86/mm, x86/mce: Add memcpy_mcsafe()
x86/mce/AMD: Document some functionality
x86/mce: Clarify comments regarding deferred error
x86/mce/AMD: Fix logic to obtain block address
x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
x86/mce: Move MCx_CONFIG MSR definitions
x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
x86/mm: Expand the exception table logic to allow new handling options
x86/mce/AMD: Set MCAX Enable bit
x86/mce/AMD: Carve out threshold block preparation
x86/mce/AMD: Fix LVT offset configuration for thresholding
x86/mce/AMD: Reduce number of blocks scanned per bank
x86/mce/AMD: Do not perform shared bank check for future processors
x86/mce: Fix order of AMD MCE init function call
Large memory Haswell-EX systems with multiple DIMMs per channel were
sometimes reporting the wrong DIMM.
Found three problems:
1) Debug printouts for socket and channel interleave were not interpreting
the register fields correctly. The socket interleave field is a 2^X
value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2,
2=3. 3=4).
2) Actual use of the socket interleave value didn't interpret as 2^X
3) Conversion of address to channel address was complicated, and wrong.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For Scalable MCA enabled processors, errors are listed per IP block. And
since it is not required for an IP to map to a particular bank, we need
to use HWID and McaType values from the MCx_IPID register to figure out
which IP a given bank represents.
We also have a new bit (TCC) in the MCx_STATUS register to indicate Task
context is corrupt.
Add logic here to decode errors from all known IP blocks for Fam17h
Model 00-0fh and to print TCC errors.
[ Minor fixups. ]
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1457021458-2522-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Correct a typo introduced by
d0cdf90031 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
As a result under some configurations DIMMs were not correctly
recognized. Problem affects only Xeon Phi architecture.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
debugfs_remove() is used to remove a file or a directory from the
debugfs filesystem on an EDAC device exit. However edac_debugfs might
not be empty. This is similar to
30f84a891b ("EDAC: Use edac_debugfs_remove_recursive()")
which changed the EDAC MCI code to use edac_debugfs_remove_recursive().
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455064165-3816-1-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
We were getting this build warning:
drivers/edac/mpc85xx_edac.c:1247:6: warning: unused variable 'pvr'
pvr is only used if CONFIG_FSL_SOC_BOOKE is defined. Declare it
__maybe_unused.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1454427573-7994-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
They're both running only when ->edac_check is initialized so remove
that check from the workqueue function itself. Synchronize/generalize
the ->op_state check between the two.
Kill useless comments, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
We use the ->edac_check function pointers to determine whether we need
to setup a polling workqueue. However, the destroy path is not balanced
and we might try to teardown an unitialized workqueue.
Balance init and destroy paths by looking at ->edac_check in both cases.
Set op_state to OP_OFFLINE *before* destroying anything.
Reported-by: Zhiqiang Hou <Zhiqiang.Hou@freescale.com>
Cc: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
dct_sel_base_off is declared as a u64 but we're only using the lower 32
bits because of a shift wrapping bug. This can possibly truncate the
upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS
row.
Fixes: c8e518d567 ('amd64_edac: Sanitize f10_get_base_addr_offset')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwanda
Signed-off-by: Borislav Petkov <bp@suse.de>
Knights Landing does not come with register that could be used to fetch
DIMM width. However the value is fixed for this architecture so it can
be hardcoded.
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449840082-18673-1-git-send-email-hubert.chrzaniuk@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Hide the EDAC workqueue pointer in a separate compilation unit and add
accessors for the workqueue manipulations needed.
Remove edac_pci_reset_delay_period() which wasn't used by anything. It
seems it got added without a user with
91b99041c1 ("drivers/edac: updated PCI monitoring")
Signed-off-by: Borislav Petkov <bp@suse.de>
It cannot fail now. We either load EDAC core after having successfully
initialized edac_subsys or we don't.
Signed-off-by: Borislav Petkov <bp@suse.de>
This was really dumb - reference counting for the main EDAC sysfs
object. While we could've simply registered it as the first thing in the
module init path and then hand it around to what needs it.
Do that and rip out all the code around it, thus simplifying the whole
handling significantly.
Move the edac_subsys node back to edac_module.c.
Signed-off-by: Borislav Petkov <bp@suse.de>
EDAC workqueue destruction is really fragile. We cancel delayed work
but if it is still running and requeues itself, we still go ahead and
destroy the workqueue and the queued work explodes when workqueue core
attempts to run it.
Make the destruction more robust by switching op_state to offline so
that requeuing stops. Cancel any pending work *synchronously* too.
EDAC i7core: Driver loaded.
general protection fault: 0000 [#1] SMP
CPU 12
Modules linked in:
Supported: Yes
Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7
RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0
< ... regs ...>
Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600)
Stack:
...
Call Trace:
call_timer_fn
run_timer_softirq
__do_softirq
call_softirq
do_softirq
irq_exit
smp_apic_timer_interrupt
apic_timer_interrupt
intel_idle
cpuidle_idle_call
cpu_idle
Code: ...
RIP __queue_work
RSP <...>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Originally the mpc85xx-pci-edac driver bound directly to the PCI
controller node.
Commit
905e75c46d ("powerpc/fsl-pci: Unify pci/pcie initialization code")
turned the PCI controller code into a platform device. Since we can't
have two drivers binding to the same device, the EDAC code was changed
to be called into as a library-style submodule. However, this doesn't
work if the EDAC driver is built as a module.
Commit
8d8fcba6d1ea ("EDAC: Rip out the edac_subsys reference counting")
exposed another problem with this approach -- mpc85xx_pci_err_probe()
was being called in the same early boot phase that the PCI controller
is initialized, rather than in the device_initcall phase that the EDAC
layer expects. This caused a crash on boot.
To fix this, the PCI controller code now creates a child platform device
specifically for EDAC, which the mpc85xx-pci-edac driver binds to.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Jia Hongtao <B38951@freescale.com>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: http://lkml.kernel.org/r/1449774432-18593-1-git-send-email-scottwood@freescale.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Knights Landing is the next generation architecture for HPC market.
KNL introduces concept of a tile and CHA - Cache/Home Agent for memory
accesses.
Some things are fixed in KNL:
() There's single DIMM slot per channel
() There's 2 memory controllers with 3 channels each, however,
from EDAC standpoint, it is presented as single memory controller
with 6 channels. In order to represent 2 MCs w/ 3 CH, it would
require major redesign of EDAC core driver.
Basically, two functionalities are added/extended:
() during driver initialization KNL topology is being recognized, i.e.
which channels are populated with what DIMM sizes
(knl_get_dimm_capacity function)
() handle MCE errors - channel swizzling
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-5-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Add options to sbridge_get_all_devices() to allow for duplicate device
IDs and devices that are scattered across mulitple PCI buses.
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-4-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
SAD limit, interleave mode and DRAM related functionalities are now
virtualized, so that overriding them is easier.
Signed-off-by: Jim Snow <jim.m.snow@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Link: http://lkml.kernel.org/r/1449136134-23706-3-git-send-email-hubert.chrzaniuk@intel.com
[ Rebase to 4.4-rc3. ]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1449073138-10852-2-git-send-email-thierry.reding@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1449136632-11680-1-git-send-email-thierry.reding@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
to clean up various abuses of headers in there. The patch to rename the
io-64-nonatomic-*.h headers caused some conflicts with new users, so I
added a workaround that we can remove in the next merge window.
The only other patch is a warning fix from Marek Vasut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dQKG
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"The asm-generic changes for 4.4 are mostly a series from Christoph
Hellwig to clean up various abuses of headers in there. The patch to
rename the io-64-nonatomic-*.h headers caused some conflicts with new
users, so I added a workaround that we can remove in the next merge
window.
The only other patch is a warning fix from Marek Vasut"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
gpio-mxc: stop including <asm-generic/bug>
n_tracesink: stop including <asm-generic/bug>
n_tracerouter: stop including <asm-generic/bug>
mlx5: stop including <asm-generic/kmap_types.h>
hifn_795x: stop including <asm-generic/kmap_types.h>
drbd: stop including <asm-generic/kmap_types.h>
move count_zeroes.h out of asm-generic
move io-64-nonatomic*.h out of asm-generic
Pull RAS changes from Ingo Molnar:
"The main system reliability related changes were from x86, but also
some generic RAS changes:
- AMD MCE error injection subsystem enhancements. (Aravind
Gopalakrishnan)
- Fix MCE and CPU hotplug interaction bug. (Ashok Raj)
- kcrash bootup robustness fix. (Baoquan He)
- kcrash cleanups. (Borislav Petkov)
- x86 microcode driver rework: simplify it by unmodularizing it and
other cleanups. (Borislav Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init()
x86/mce: Add a Scalable MCA vendor flags bit
MAINTAINERS: Unify the microcode driver section
x86/microcode/intel: Move #ifdef DEBUG inside the function
x86/microcode/amd: Remove maintainers from comments
x86/microcode: Remove modularization leftovers
x86/microcode: Merge the early microcode loader
x86/microcode: Unmodularize the microcode driver
x86/mce: Fix thermal throttling reporting after kexec
kexec/crash: Say which char is the unrecognized
x86/setup/crash: Check memblock_reserve() retval
x86/setup/crash: Cleanup some more
x86/setup/crash: Remove alignment variable
x86/setup: Cleanup crashkernel reservation functions
x86/amd_nb, EDAC: Rename amd_get_node_id()
x86/setup: Do not reserve crashkernel high memory if low reservation failed
x86/microcode/amd: Do not overwrite final patch levels
x86/microcode/amd: Extract current patch level read to a function
x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC
x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts
...
The PAGES_TO_MiB macro is used for unit conversion but the
trace_mc_event() tracepoint expects a page address. Fix that.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1445341538-24271-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This function doesn't give us the "Node ID" as the function name
suggests. Rather, it receives a PCI device as argument, checks
the available F3 PCI device IDs in the system and returns the
index of the matching Bus/Device IDs.
Rename it to amd_pci_dev_to_node_id().
No functional change is introduced.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1445246268-26285-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The bootloader may or may not enable the ECC_CORR_EN bit. By
not enabling ECC_CORR_EN, when error happens, it is the user's
responsibility to perform a full SDRAM scrub.
Remove the check for ECC_CORR_EN.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Thor Thayer <tthayer@opensource.altera.com>
Link: http://lkml.kernel.org/r/1444864456-21778-1-git-send-email-dinguyen@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
These are not implementations of default architecture code but helpers
for drivers. Move them to the place they belong to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
debugfs_remove() is used to remove a file or a directory from the
debugfs filesystem, but mci->debugfs might not empty.
This can be triggered by the following sequence:
1) Enable CONFIG_EDAC_DEBUG
2) insmod an EDAC module (like i3000_edac or similar)
3) rmmod this module
4) we can see files remaining under <debugfs_mountpoint>/edac/ like
"fake_inject", for example.
Removing edac_core then, causes a NULL pointer dereference.
Reported-by: Yun Wu (Abel) <wuyun.wu@huawei.com>
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1444787364-104353-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Borislav Petkov <bp@suse.de>
This platform driver has an OF device ID table but the OF module alias
information is not created so module autoloading won't work.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20150917114619.GA13145@goodgumbo.baconseed.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Git provides us all the changelogs anyway. So trim the comments section
here. Update the copyrights info while at it.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The scrub rate control register has moved to function 2 in PCI config
space and is at a different offset on family 0x15, models 0x60 and
later. The minimum recommended scrub rate has also changed. (Refer to
D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG).
Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate
this.
Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Cleanup conditionals. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
