The FWHT codec can also be used by userspace utilities and libraries, but
since the current license is GPL and not LGPL it is not possible to include
it in e.g. gstreamer, since LGPL is required for that.
Change the license of these four files to LGPL.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tom aan de Wiel <tom.aandewiel@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers.
The various mapping modes were easy, but for signaling the request capability
a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in
vim2m and vivid). Drivers have to set this bitfield for any queue where
requests are supported.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
drivers/media/platform/vicodec/vicodec-core.c:160:25: warning: variable 'q_out' set but not used [-Wunused-but-set-variable]
It's indeed not used, and it can be removed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The initial sizeimage for the compressed decoder output was wrong.
The size of the output was incorrectly used to calculate the image
size, that should have been the size of the capture.
Rework the code to fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for requests to vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the media_device to vivid. This is a prerequisite
for request support.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for requests to vim2m.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
v4l2_ctrl uses mutexes, so we can't setup a ctrl_handler in
interrupt context. Switch to a workqueue instead and drop the timer.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This implements the V4L2 part of the request support. The main
change is that vb2_qbuf and vb2_prepare_buf now have a new
media_device pointer. This required changes to several drivers
that did not use the vb2_ioctl_qbuf/prepare_buf helper functions.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The v4l2_g/s_ext_ctrls functions now support control handlers that
represent requests.
The v4l2_ctrls_find_req_obj() function is responsible for finding the
request from the fd.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a 'bool from_other_dev' argument: set to true if the two
handlers refer to different devices (e.g. it is true when
inheriting controls from a subdev into a main v4l2 bridge
driver).
This will be used later when implementing support for the
request API since we need to skip such controls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
While decoding you need to make sure you do not get values < 0
or > 255. Note that since this code will also be used in userspace
utilities the clamp macro isn't used since that is kernel-only.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Split off the decode and encode functions into a separate
source that can be reused elsewhere.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The codec source is generic and not vicodec specific. It can be used
by other drivers or userspace as well. So rename the source and header
to something more generic (codec-fwht.c/h) and prefix the defines, types
and functions with fwht_.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Exit the loop immediately once it is clear that the plane
cannot be compressed. Also clear the PCODED bit and fix the
PCODED check (it should check for the bit) in the caller code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The flags field can be removed from struct vicodec_q_data.
This simplifies the flags handling elsewhere.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for 4:2:2, 4:4:4 and RGB 24/32 bits formats.
This makes it a lot more useful, esp. as a simple video compression
codec for use with v4l2-ctl/qvidcap.
Note that it does not do any conversion between e.g. 4:2:2 and 4:2:0
or RGB and YUV: it still just compresses planes be they Y/U/V or R/G/B.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of hardcoding the quantization parameter (or 'DEADZONE_WIDTH'
as it was called in the codec) make this configurable through two
controls: one for I frames, one for P frames.
Also allow changing these parameters and the GOP_SIZE parameter while
streaming.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Multiple files in this driver fail to build because of missing
header inclusions:
drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c: In function 'csiphy_hw_version_read':
drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c:31:18: error: implicit declaration of function 'readl_relaxed'; did you mean 'xchg_relaxed'? [-Werror=implicit-function-declaration]
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c: In function 'csiphy_hw_version_read':
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c:52:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]
Add linux/io.h there and in all other files that call
readl/writel and related interfaces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use managed memory allocations for structs which are used until
the driver is removed.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The empty suspend/resume functions cause a build warning
when they are unused:
drivers/media/platform/qcom/camss/camss.c:1001:12: error: 'camss_runtime_resume' defined but not used [-Werror=unused-function]
drivers/media/platform/qcom/camss/camss.c:996:12: error: 'camss_runtime_suspend' defined but not used [-Werror=unused-function]
Mark them as __maybe_unused so the compiler can silently drop them.
Fixes: 02afa816db ("media: camss: Add basic runtime PM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
- New Device Support
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
- New Functionality
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
- Fix-ups
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
- Bug Fixes
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501
-----BEGIN PGP SIGNATURE-----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=4Yj4
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
- Add ChromeOS EC CEC driver
- Add ROHM BD71837 PMIC driver
New Device Support:
- Add support for Dialog Semi DA9063L PMIC variant to DA9063
- Add support for Intel Ice Lake to Intel-PLSS-PCI
- Add support for X-Powers AXP806 to AXP20x
New Functionality:
- Add support for USB Charging to the ChromeOS Embedded Controller
- Add support for HDMI CEC to the ChromeOS Embedded Controller
- Add support for HDMI CEC to Intel HDMI
- Add support for accessory detection to Madera devices
- Allow individual pins to be configured via DT' wlf,csnaddr-pd
- Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
Fix-upsL
- Trivial renaming/spelling fixes; cros_ec, da9063-*
- Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
- Transition to helper macros/functions; da9063-*
- Constify; kempld-core
- Improve error path/messages; wm8994-core
- Disable IRQs locally instead of relying on USB subsystem; dln2
- Remove unused code; rave-sp
- New exports; sec-core
Bug Fixes:
- Fix possible false I2C transaction error; arizona-core
- Fix declared memory area size; hi655x-pmic
- Fix checksum type; rave-sp
- Fix incorrect default serial port configuration: rave-sp
- Fix incorrect coherent DMA mask for sub-devices; sm501"
* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
mfd: madera: Add register definitions for accessory detect
mfd: sm501: Set coherent_dma_mask when creating subdevices
mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
mfd: bd71837: Core driver for ROHM BD71837 PMIC
media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
mfd: sec-core: Export OF module alias table
mfd: as3722: Disable auto-power-on when AC OK
mfd: axp20x: Support AXP806 in I2C mode
mfd: axp20x: Add self-working mode support for AXP806
dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
mfd: rave-sp: Add legacy watchdog ping command translation
mfd: rave-sp: Add legacy EEPROM access command translation
mfd: rave-sp: Initialize flow control and parity of the port
mfd: rave-sp: Fix incorrectly specified checksum type
mfd: rave-sp: Remove unused defines
mfd: hi655x: Fix regmap area declared size for hi655x
mfd: ti_am335x_tscadc: Fix struct clk memory leak
...
Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level
hardware bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of
the crazy out-of-tree drivers that have been floating around
for years, combined with some really hacky userspace
implementations. This is only for GNSS receivers, but you
have to start somewhere, and this is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and existing
drivers.
Full details of everything is in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
cvW7a+McOoKz/MGmEKsi
=TNfn
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
Without the MFD driver, we run into a link error:
drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_transmit':
cros-ec-cec.c:(.text+0x474): undefined reference to `cros_ec_cmd_xfer_status'
drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_set_log_addr':
cros-ec-cec.c:(.text+0x60b): undefined reference to `cros_ec_cmd_xfer_status'
drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_adap_enable':
cros-ec-cec.c:(.text+0x77d): undefined reference to `cros_ec_cmd_xfer_status'
As we can compile-test all the dependency, the extra '| COMPILE_TEST' is
not needed to get the build coverage, and we can simply turn MFD_CROS_EC
into a hard dependency to make it build in all configurations.
Fixes: cd70de2d35 ("media: platform: Add ChromeOS EC CEC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ClJZ
-----END PGP SIGNATURE-----
Merge tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x
- new sensor drivers: ak7375, ov2680 and rj54n1cb0c
- an old soc-camera sensor driver converted to the V4L2 framework:
mt9v111
- a new Voice-Coil Motor (VCM) driver: dw9807-vcm
- some cleanups at cx25821, removing legacy unused code
- some improvements at ddbridge driver
- new platform driver: vicodec
- some DVB API cleanups, removing ioctls and compat code for old
out-of-tree drivers that were never merged upstream
- improvements at DVB core to support frontents that support both
Satellite and non-satellite delivery systems
- got rid of the unused VIDIOC_RESERVED V4L2 ioctl
- some cleanups/improvements at gl861 ISDB driver
- several improvements on ov772x, ov7670 and ov5640, imx274, ov5645,
and smiapp sensor drivers
- fixes at em28xx to support dual TS devices
- some cleanups at V4L2/VB2 locking logic
- some API improvements at media controller
- some cec core and drivers improvements
- some uvcvideo improvements
- some improvements at platform drivers: stm32-dcmi, rcar-vin, coda,
reneseas-ceu, imx, vsp1, venus, camss
- lots of other cleanups and fixes
* tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits)
Revert "media: vivid: shut up warnings due to a non-trivial logic"
siano: get rid of an unused return code for debugfs register
media: isp: fix a warning about a wrong struct initializer
media: radio-wl1273: fix return code for the polling routine
media: s3c-camif: fix return code for the polling routine
media: saa7164: fix return codes for the polling routine
media: exynos-gsc: fix return code if mutex was interrupted
media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API
media: xc4000: get rid of uneeded casts
media: drxj: get rid of uneeded casts
media: tuner-xc2028: don't use casts for printing sizes
media: cleanup fall-through comments
media: vivid: shut up warnings due to a non-trivial logic
media: rtl28xxu: be sure that it won't go past the array size
media: mt9v111: avoid going past the buffer
media: vsp1_dl: add a description for cmdpool field
media: sta2x11: add a missing parameter description
media: v4l2-mem2mem: add descriptions to MC fields
media: i2c: fix warning in Aptina MT9V111
media: imx: shut up a false positive warning
...
0day kernel testing robot got the below dmesg and the first bad commit is
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
commit 3354b54f9f
[ 248.847809] BUG: unable to handle kernel paging request at ffffc90000393131
[ 248.848015] Call Trace:
[ 248.848015] ? vivid_dev_release+0xc0/0xc0
[ 248.848015] ? acpi_dev_pm_attach+0x27/0xd0
This reverts commit 3354b54f9f.
As sparse complains:
drivers/media/platform/omap3isp/isp.c:303:39: warning: Using plain integer as NULL pointer
when a struct is initialized with { 0 }, actually the first
element of the struct is initialized with zeros, initializing the
other elements recursively. That can even generate gcc warnings
on nested structs.
So, instead, use the gcc-specific syntax for that (with is used
broadly inside the Kernel), initializing it with {};
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All poll handlers should return a poll flag, and not error codes. So,
instead of returning an error, do the right thing here,
e. g. to return EPOLERR on errors, just like the V4L2 VB2 code.
Solves the following sparse warning:
drivers/media/platform/s3c-camif/camif-capture.c:604:21: warning: incorrect type in assignment (different base types)
drivers/media/platform/s3c-camif/camif-capture.c:604:21: expected restricted __poll_t [usertype] ret
drivers/media/platform/s3c-camif/camif-capture.c:604:21: got int
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All poll routines expect a poll flag, and not error codes. So,
instead of returning -ERESTARTSYS if the mutex got interrupted,
return EPOLERR, just like the V4L2 VB2 code.
Solves this sparce warning:
drivers/media/platform/exynos-gsc/gsc-m2m.c:716:24: warning: incorrect type in return expression (different base types)
drivers/media/platform/exynos-gsc/gsc-m2m.c:716:24: expected restricted __poll_t
drivers/media/platform/exynos-gsc/gsc-m2m.c:716:24: got int
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The vivid driver uses a complex logic to save one kalloc/kfree
allocation. That non-trivial way of allocating data causes
smatch to warn:
drivers/media/platform/vivid/vivid-core.c:869 vivid_create_instance() warn: potentially one past the end of array 'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]'
drivers/media/platform/vivid/vivid-core.c:869 vivid_create_instance() warn: potentially one past the end of array 'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]'
I also needed to read the code several times in order to understand
what it was desired there. It turns that the logic was right,
although confusing to read.
As it is doing allocations on a non-standard way, let's add some
documentation while shutting up the false positive.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Gets rid of this build warning:
drivers/media/platform/vsp1/vsp1_dl.c:229: warning: Function parameter or member 'cmdpool' not described in 'vsp1_dl_manager'
Fixes: f3b98e3c4d ("media: vsp1: Provide support for extended command pools")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As original license mentioned, it is GPL-2.0+ in SPDX.
Then, MODULE_LICENSE() should be "GPL" instead of "GPL v2".
See ${LINUX}/include/linux/module.h
"GPL" [GNU Public License v2 or later]
"GPL v2" [GNU Public License v2]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kconfig and Makefile doesn't have license line, thus,
these are GPL-2.0 as default.
All ohter files are GPL-2.0+ as original license.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Calculate the top and bottom fields for the interlaced frames and
utilise the extended display list command feature to implement the
auto-field operations. This allows the DU to update the VSP2 registers
dynamically based upon the currently processing field.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
VSPD and VSP-DL devices can provide extended display lists supporting
extended command display list objects.
These extended commands require their own dma memory areas for a header
and body specific to the command type.
Implement a command pool to allocate all necessary memory in a single
DMA allocation to reduce pressure on the TLB, and provide convenient
re-usable command objects for the entities to utilise.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Extended display list headers allow pre and post command lists to be
executed by the VSP pipeline. This provides the base support for
features such as AUTO_FLD (for interlaced support) and AUTO_DISP (for
supporting continuous camera preview pipelines.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Header mode display lists are now supported on all WPF outputs. To
support extended headers and auto-fld capabilities for interlaced mode
handling only header mode display lists can be used.
Disable the headerless display list configuration, and remove the dead
code.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VSP1 devices define their specific capabilities through features
marked in their device info structure. Various parts of the code read
this info structure to infer if the features are available.
Wrap this into a more readable vsp1_feature(vsp1, f) macro to ensure
that usage is consistent throughout the driver.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If there is an error allocating a display list within a DLM object
the existing display lists are not free'd, and neither is the DL body
pool.
Use the existing vsp1_dlm_destroy() function to clean up on error.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The vsp1 reference in the vsp1_dl_body structure is not used.
Remove it.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Both vsp1_dl_list_commit() and __vsp1_dl_list_put() walk the display
list chain referencing the nodes as children, when in reality they are
siblings.
Update the terminology to 'dl_next' to be consistent with the
vsp1_video_pipeline_run() usage.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The kernel provides a __packed definition to abstract away from the
compiler specific attributes tag.
Convert all packed structures in VSP1 to use it.
The GCC documentation [0] describes this attribute as "the structure or
union is placed to minimize the memory required".
The Keil compiler documentation at [1] warns that the use of this
attribute can cause a performance penalty in the event that the compiler
can not deduce the allignment of each field.
Careful examination of the object code generated both with and without
this attribute shows that these structures are accessed identically and
are not affected by any performance penalty. The structures are
correctly aligned and padded to match the needs of the hardware already.
This patch does not serve to make a decision as to the use of the
attribute, but purely to clean up the code to use the kernel defined
abstraction as per [2].
[0] https://gcc.gnu.org/onlinedocs/gcc/Common-Type-Attributes.html#index-packed-type-attribute
[1] http://www.keil.com/support/man/docs/armcc/armcc_chr1359124230195.htm
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/compiler-gcc.h?h=v4.16-rc5#n92
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The pixel format is 'unsupported'. Fix the small debug message which
incorrectly declares this.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If vpif_probe() fails on v4l2_device_register() then memory allocated
at initialize_vpif() for global vpif_obj.dev[i] become unreleased.
The patch adds deallocation of vpif_obj.dev[i] on the error path and
removes duplicated check on platform_data presence.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 4a29b70907 ("[media] vimc: Subdevices as modules") removes
vimc allocation from vimc_probe(), so corresponding deallocation
on the error path tries to free static memory.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A couple of drivers produced build errors after the mod_devicetable.h
header was split out from the platform_device one, e.g.
drivers/media/platform/davinci/vpbe_osd.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
drivers/media/platform/davinci/vpbe_venc.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
This adds the inclusion where needed.
Fixes: ac3167257b ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Changing a user control value can trigger an event to other
users. Add support for that.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for 10-bit packed V4L2_PIX_FMT_Y10P (on 8x16 and 8x96)
and unpacked V4L2_PIX_FMT_Y10 (on 8x96 only) pixel formats.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for RAW MIPI14 format for RDI mode on 8x96.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the PRDI mode on 8x96 to allow to configure RAW MIPI10
to Plain16 format conversion.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Usually the format on the source pad is the same as on the sink pad.
However the CSID is able to do some format conversions. To support
this make the format on the source pad selectable amongst a list
of formats. This list can be different for each sink pad format.
This is still not used but will be when the format conversions
are implemented.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support to output UYVY formats from the VFE (via the PIX interface).
A configuration for the realign module in the VFE is added. As the
realign module is present on 8x96 but not on 8x16, this is supported
on 8x96 only.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rework the format selection on the source pad. Make the format
on the source pad selectable amongst a list of formats. This
list can be different for each sink pad format.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As the 8x16 and 8x96 support different formats, separate the
arrays which contain the supported formats. For the VFE also
add separate arrays for RDI and PIX subdevices.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This will allow to add support for different hardware.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
ISPIF hardware modules on 8x16 and 8x96 are similar. However on
8x96 the ISPIF routes data to two VFE hardware modules. Add
separate interrupt handler for 8x96 to handle the additional
interrupts.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
CSID hardware modules on 8x16 and 8x96 are similar. There is no
need to duplicate the code by adding separate versions. Just
update the register macros to return the correct register
addresses.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Restructure lane configuration so it is simpler and will allow
similar (although not the same) handling for different hardware
versions.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This will allow to add support for different hardware.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
[hans.verkuil@cisco.com: remove trailing empty line]
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is a PM domain for each of the VFE hardware modules. Add
support for basic runtime PM support to be able to control the
PM domains. When a PM domain needs to be powered on - a device
link is created. When a PM domain needs to be powered off -
its device link is removed. This allows separate and
independent control of the PM domains.
Suspend/Resume is still not supported.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add structs with 8x96 resources. As the number of CSIPHY, CSID
and VFE hardware modules is different on 8x16 and 8x96 select
the number at runtime and allocate needed structures
dynamically.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use "no change" value when clearing CAMIF status and make sure
this is done before configuring the new command.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Simplify getting of the line pointer by using the container_of
macro instead of traversing media controller links.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the member name which is "line" instead of the pointer argument.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The CSID decodes the input data stream. When the input comes from
the Test Generator the format of the stream is set on the source
media pad. When the input comes from the CSIPHY the format is the
one on the sink media pad. Use the proper format for each case.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use more logical clock names - similar to the names in documentation.
This will allow better handling of the clocks in the driver when support
for more hardware versions is added - equivalent clocks on different
hardware versions will have the same name.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a write memory barier after clock mux config and before the rest
of the csiphy config.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
of_graph_get_next_endpoint increases the refcount of the returned
node and decreases the refcount of the passed node. Take this into
account and use of_node_put properly.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use SPDX license headers for all files of the Qualcomm CAMSS driver.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Support for camera subsystem on QComm MSM8996/APQ8096 is to be added
so remove hardware version from CAMSS driver's path.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VSP uses a lock to protect the BRU and BRS assignment when
configuring pipelines. The lock is taken in vsp1_du_atomic_begin() and
released in vsp1_du_atomic_flush(), as well as taken and released in
vsp1_du_setup_lif(). This guards against multiple pipelines trying to
assign the same BRU and BRS at the same time.
The DRM framework calls the .atomic_begin() operations in a loop over
all CRTCs included in an atomic commit. On a VSPDL (the only VSP type
where this matters), a single VSP instance handles two CRTCs, with a
single lock. This results in a deadlock when the .atomic_begin()
operation is called on the second CRTC.
The DRM framework serializes atomic commits that affect the same CRTCs,
but doesn't know about two CRTCs sharing the same VSPDL. Two commits
affecting the VSPDL LIF0 and LIF1 respectively can thus race each other,
hence the need for a lock.
This could be fixed on the DRM side by forcing serialization of commits
affecting CRTCs backed by the same VSPDL, but that would negatively
affect performances, as the locking is only needed when the BRU and BRS
need to be reassigned, which is an uncommon case.
The lock protects the whole .atomic_begin() to .atomic_flush() sequence.
The only operation that can occur in-between is vsp1_du_atomic_update(),
which doesn't touch the BRU and BRS, and thus doesn't need to be
protected by the lock. We can thus only take the lock around the
pipeline setup calls in vsp1_du_atomic_flush(), which fixes the
deadlock.
Fixes: f81f9adc4e ("media: v4l: vsp1: Assign BRU and BRS to pipelines dynamically")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Look up of buffers in s5p_mfc_handle_frame_new, s5p_mfc_handle_frame_copy_time
functions is not working properly for DMA addresses above 2 GiB. As a result
flags and timestamp of returned buffers are not set correctly and it breaks
operation of GStreamer/OMX plugins which rely on the CAPTURE buffer queue
flags.
Due to improper return type of the get_dec_y_adr, get_dspl_y_adr callbacks
and sign bit extension these callbacks return incorrect address values,
e.g. 0xfffffffffefc0000 instead of 0x00000000fefc0000. Then the statement:
"if (vb2_dma_contig_plane_dma_addr(&dst_buf->b->vb2_buf, 0) == dec_y_addr)"
is always false, which breaks looking up capture queue buffers.
To ensure proper matching by address u32 type is used for the DMA
addresses. This should work on all related SoCs, since the MFC DMA
address width is not larger than 32-bit.
Changes done in this patch are minimal as there is a larger patch series
pending refactoring the whole driver.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Latest errata document updates the start procedure for V3M. This change
in addition to adhering to the datasheet update fixes capture on early
revisions of V3M.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In rga_remove(), dma_free_attrs is being passed the wrong
cpu address, which triggers an exception if the driver is
removed. Fix it.
Tested on a RK3399 platform, with a bind/unbind cycle.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The vivid driver will overlay stream time on generated frames. Though,
in interlacing mode V4L2_FIELD_ALTERNATE, each field is separate and
must have the same time to ensure proper render. Though, this time was
only updated every 2 frames as the code was checking against the wrong
counter (frame counter rather then field counter).
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The CODA7541 firmware does not set the SPS frame cropping fields to
properly describe coded h.264 streams with frame sizes that are not a
multiple of the macroblock size.
This adds RBSP parsing code and a SPS fixup routine to manually replace
the cropping information in the headers produced by the firmware with
the correct values.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[hans.verkuil@cisco.com: added explanation of SPS RBSP to comment]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When encoding h.264, if visible resolution is not aligned to macroblock
size, frame cropping has to be set in the SPS header to produce correct
streams. The CODA960 firmware can do this on its own if asked to.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In commit 2d9445db0e ("media: vsp1: Use reference counting for
bodies"), a new field was introduced to the vsp1_dl_body structure to
account for usage tracking of the body.
Document the newly added field in the kerneldoc.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
'current' is also defined in asm-generic/current.h.
When compiling this driver for older kernels with the media_build system,
this header is included via compat.h and it no longer compiles. Rename
current to cur.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is implementing multi-stream decoder support. The multi-stream
will be used to enable/disable the primary/secondary decoder
outputs. Depending on formats on both decoder outputs we could
implement downscale, dithering and supporting UBWC (universal
bandwidth compression) formats. The UBWC compressed raw format is
used to optimize interconnect bandwidth for bigger resolutions
like 4K and hence we will get some power-saving benefits as well.
Both decoder outputs are distinguished by buffer_type field in
the HFI packets. For example HFI_BUFFER_OUTPUT is the buffer type
for primary decoder output and HFI_BUFFER_OUTPUT2 is for secondary
decoder output.
Starting from Venus 4xx the DPB buffers format must be UBWC, so
the multi-stream becomes mandatory for this Venus version. That
means that we need to allocate internally in the driver a set of
DPB buffers (with UBWC NV12 format) and give them to the firmware.
The other decoder output (we called it OPB) format will be NV12
linear format and with the same resolution (or smaller in case
the user wants to downscale).
The DPB buffers are used for decoder reference frames and those
have to be in a specific format (UBWC). So one decoder output is
used to fill those reference buffers while the other output is
used to fill the userspace buffers with the user requested format.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This move the calculations of raw and compressed buffer sizes
on common helper and make it identical for encoder and decoder.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make a new function vdec_output_conf() for decoder output
configuration. vdec_output_conf() will set properties via
HFI interface related to the output configuration, and
keep vdec_set_properties() which will set properties
related to decoding parameters.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rework and rename vdec_cap_num_buffers() to get the number of
input buffers too.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Extend venus_helper_set_num_bufs() helper function with one more
argument to set number of output buffers for the secondary decoder
output.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
These are new properties applicable to Venus version 4xx. Add the
helpers and call them from decoder and encoder drivers.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The new helper will has one more argument for buffer type, that
way the decoder can configure the format on it's secondary
output.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds one more function argument to pass buffer type to
set_output_resolution() helper function. That is a preparation
to support secondary decoder output.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Delete not used flag for capture buffer allocation mode and
no longer used cap_bufs_mode_dynamic from instance structure.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add and use a helper function to set actual buffer size for
particular buffer type. This is also preparation to use
the second decoder output.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Adds a new helper function to set dynamic buffer mode if it is
supported by current HFI version. The dynamic buffer mode is
set unconditionally for both decoder outputs.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rename is_reg_unreg_needed() to better name is_dynamic_bufmode() and
use buffer mode from enumerated per codec capabilities.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds common capability parser for all supported Venus
versions. Having it will help to enumerate better the supported
raw formats and codecs and also the capabilities for every
codec like max/min width/height, framerate, bitrate and so on.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add two more clocks for Venus 4xx in core structure and create
a new power enable function to handle it for 3xx/4xx versions.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds suspend (power collapse) functionality by reusing
the suspend function for Venus 3xx and also enables idle indicator
property for Venus 4xx (where it is disabled by default).
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This moves setting of default properties (firmware debug, idle
indicator and low power mode) from session init to core init.
All of those properties are need to be enabled/disabled early
so that they could be used before the clients are even initialized.
The other reason is to set idle indicator property early before
we enter into venus_suspend function where we need to check for
ARM9 WFI.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This fixes the suspend function for Venus 3xx versions by
add a check for WFI (wait for interrupt) bit. This bit
is on when the ARM9 is idle and entered in low power mode.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add AXI halt support for version 4xx by using venus wrapper
registers.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds handling of buffers of type OUTPUT2 which is needed to
support Venus 4xx version.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This makes possible to handle session_continue for 4xx as well.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
HFI version 4xx can pass more properties in the sequence change
event, extend the event structure with them.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Data pointer should be incremented by size of the structure not
the size of a pointer, correct the mistake.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Tested-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This enables reordering support for h.264 main profile level 4.2,
5.0, and 5.1 streams. Even though we likely can't play back such
streams at full speed, we should still recognize them correctly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Allow to set a crop rectangle on the encoder output queue to set the
visible resolution as required by the V4L2 codec API.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Remove the intermediate width and height variables, the calculation is
simple enough.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All internal YCbCr frame buffers are the same size, calculate ycbcr_size
once before the allocation loop.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a software codec based on the Fast Walsh Hadamard Transform.
The original FWHT codec was developed by Tom aan de Wiel, and it was
turned into 'proper' kernel code by Hans Verkuil, with a lot of
performance and memory improvements.
Signed-off-by: Tom aan de Wiel <tom.aandewiel@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the new (optional) 5V gpio in order to debug 5V
changes. Some displays turn off CEC if the 5V is not detected,
so it is useful to be able to monitor this line.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 1d38971438 ("[media] v4l: rcar_fdp1: add FCP dependency") fixed
a compilation breakage when the optional VIDEO_RENESAS_FCP dependency is
compiled as a module while the rcar_fdp1 driver is built in. As a side
effect it disabled compilation on Gen2 by disallowing the valid
combination ARCH_RENESAS && !VIDEO_RENESAS_FCP. Fix it by handling the
dependency the same way the vsp1 driver did in commit 199946731f
("[media] vsp1: clarify FCP dependency").
Fixes: 1d38971438 ("[media] v4l: rcar_fdp1: add FCP dependency")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Switch to dev_dbg for the busy TX message to avoid having a flood of:
[ 228.064570] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting
[ 230.368489] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting
[ 234.208655] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting
[ 236.512558] meson-ao-cec c8100100.cec: meson_ao_cec_transmit: busy TX: aborting
This message is only a debug hint and not an error.
Fixes: 7ec2c0f72c ("media: platform: Add Amlogic Meson AO CEC Controller driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Implementing job_abort() does not make sense on some drivers.
This is not a problem, as the abort is not required to
wait for the job to finish. Quite the opposite, drivers
are encouraged not to wait.
Demote v4l2_m2m_ops.job_abort from required to optional, and
clean all drivers with dummy implementations.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As per the documentation, job_abort is not required
to wait until the current job finishes. It is redundant
to do so, as the core will perform the wait operation.
Remove the wait infrastructure completely.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As per the documentation, job_abort is not required
to wait until the current job finishes. It is redundant
to do so, as the core will perform the wait operation.
Remove the wait infrastructure completely.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Limit frame sizes to the [1, 65536] interval, media bus formats to
the available list of formats, and initialize pad and try formats.
Reported-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Handle data-enable signal polarity. If the polarity is not specifically
requested to be active low, use the active high default.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The ChromeOS Embedded Controller can expose a CEC bus, this patch add the
driver for such feature of the Embedded Controller.
This driver is part of the cros-ec MFD and will be add as a sub-device when
the feature bit is exposed by the EC.
The controller will only handle a single logical address and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
A couple of drivers produced build errors after the mod_devicetable.h
header was split out from the platform_device one, e.g.
drivers/media/platform/davinci/vpbe_osd.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
drivers/media/platform/davinci/vpbe_venc.c:42:40: error: array type has incomplete element type 'struct platform_device_id'
This adds the inclusion where needed.
Fixes: ac3167257b ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a menu control V4L2_CID_MPEG_VIDEO_VP8_PROFILE for VP8 profile and make
V4L2_CID_MPEG_VIDEO_VPX_PROFILE an alias of it. This new control is used to
select the desired profile for VP8 encoder and query for supported profiles by
VP8 encoder/decoder.
Though we have originally a control V4L2_CID_MPEG_VIDEO_VPX_PROFILE and its name
contains 'VPX', it works only for VP8 because supported profiles usually differ
between VP8 and VP9. In addition, this control cannot be used for querying since
it is not a menu control but an integer control, which cannot return an
arbitrary set of supported profiles.
The new control V4L2_CID_MPEG_VIDEO_VP8_PROFILE is a menu control as with
controls for other codec profiles. (e.g. H264)
In addition, this patch also fixes the use of V4L2_CID_MPEG_VIDEO_VPX_PROFILE in
drivers of Qualcomm's venus and Samsung's s5p-mfc.
Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Handle parallel subdevices in link_notify callback. If the notified link
involves a parallel subdevice, do not change routing of the VIN-CSI-2
devices and mark the VIN instance as using a parallel input. If the
CSI-2 link setup succeeds instead, mark the VIN instance as using CSI-2.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When running with media-controller link the parallel input
media entities with the VIN entities at 'complete' callback time.
To create media links the v4l2_device should be registered first.
Check if the device is already registered, to avoid double registrations.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The rcar-vin driver so far had a mutually exclusive code path for
handling parallel and CSI-2 video input subdevices, with only the CSI-2
use case supporting media-controller. As we add support for parallel
inputs to Gen3 media-controller compliant code path now parse both port@0
and port@1, handling the media-controller use case in the parallel
bound/unbind notifier operations.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Media bus configuration flags and media bus type were so far a property
of each VIN instance, as the subdevice they were connected to was
immutable during the whole system life time.
With the forth-coming introduction of parallel input devices support,
a VIN instance can have the subdevice it is connected to switched at
runtime, from a CSI-2 subdevice to a parallel one and viceversa, through
the modification of links between media entities in the media controller
graph. To avoid discarding the per-subdevice configuration flags retrieved by
v4l2_fwnode parsing facilities, cache them in the 'rvin_graph_entity'
member of each VIN instance, opportunely renamed to 'rvin_parallel_entity'.
Also modify the register configuration function to take mbus flags into
account when running on a bus type that supports them.
The media bus type currently in use will be updated in a follow-up patch
to the link state change notification function.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
During the notifier initialization, memory for the list of associated async
subdevices is reserved during the fwnode endpoint parsing from the v4l2-async
framework. If the notifier registration fails, that memory should be released
and the notifier 'cleaned up'.
Catch the notifier registration error and perform the cleanup both for the
group and the parallel notifiers.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As CSI-2 subdevices are shared between several VIN instances, a shared
notifier to collect the CSI-2 async subdevices is required. So far, the
rcar-vin driver used the notifier of the last VIN instance to probe but
with the forth-coming introduction of parallel input subdevices support
in mc-compliant code path, each VIN may register its own notifier if any
parallel subdevice is connected there.
To avoid registering a notifier twice (once for parallel subdev and one
for the CSI-2 subdevs) create a group notifier, shared by all the VIN
instances.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As the term 'digital' is used all over the rcar-vin code in place of
'parallel', rename all the occurrencies.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Request API requires a media node. Add one to the vim2m driver so we can
use requests with it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
viu_of_probe() ignores fails in i2c_get_adapter(),
tries to unlock uninitialized mutex on error path.
The patch streamlining the error handling in viu_of_probe().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds the i.MX6 CODA960 firmware versions 2.1.9
(revision 32515) to the list of supported firmware versions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Explicitly clear DEC_SEQ_JPG_THUMB_EN during sequence initialization.
Not clearing the register does not cause problems, since the only other
codec (MPEG-4 decode) that writes to this register happens to always
write 0 as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Padding the bitstream buffer is not enough to reliably avoid prefetch
failures. Picture runs with the next buffer's header already visible to
the CODA7541 succeed much more reliably, so always queue two JPEG frames
into the bitstream buffer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The hardware codec is not colorspace aware. We should trust userspace to
set the correct colorimetry information on the OUTPUT queue and mirror
the exact same setting on the CAPTURE queue.
There is no reason to restrict colorspace to JPEG for JPEG images, if
userspace injects the correct colorspace information into the JPEG
headers after encoding.
Fixes: b14ac54568 ("[media] coda: improve colorimetry handling")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If new buffers are queued after streamoff, the flag will be cleared
anyway, so this is mostly for the purpose of correctness.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In the vivid driver you want gain to continuous change while autogain
is on. However, dev->jiffies_vid_cap doesn't actually change. It probably
did in the past, but changes in the code caused this to be a fixed value
that is only set when you start streaming.
Replace it by jiffies, which is always changing.
[mchehab@kernel.org: use jiffies_to_msecs() instead of dividing by HZ]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Whether reordering should be enabled only depends on the h.264 profile.
Stop parsing the level and drop the debug message, profile and level
can now be determined via read-only decoder controls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The decoder profile/level controls initially can be used to determine
supported profiles and levels. The values are set for a given stream
once the headers are parsed.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The encoder picture run command takes a picture source stride parameter.
This must be set to the output queue's bytesperline, not width.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver is currently specifying a video_device lock,
which means it is protecting all the ioctls (including
queue ioctls) with a single mutex.
It's therefore straightforward to implement wait_prepare
and wait_finish, by explicitly setting the vb2_queue lock.
Having these callbacks releases the queue lock while blocking,
which improves latency by allowing for example streamoff
or qbuf operations while waiting in dqbuf.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver is currently specifying a video_device lock,
which means it is protecting all the ioctls (including
queue ioctls) with a single mutex.
It's therefore straightforward to implement wait_prepare
and wait_finish, by explicitly setting the vb2_queue lock.
Having these callbacks releases the queue lock while blocking,
which improves latency by allowing for example streamoff
or qbuf operations while waiting in dqbuf.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver is currently specifying a vb2_queue lock,
which means it straightforward to implement wait_prepare
and wait_finish.
Having these callbacks releases the queue lock while blocking,
which improves latency by allowing for example streamoff
or qbuf operations while waiting in dqbuf.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the mutex in struct mtk_mdp_ctx to protect the
capture and output vb2_queues. This allows to replace
the ad-hoc wait_{prepare, finish} with
vb2_ops_wait_{prepare, finish}.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When the subdevice doesn't provide s_power core ops callback, the
v4l2_subdev_call for s_power returns -ENOIOCTLCMD. If the subdevice
doesn't have the special handling for its power saving mode, the s_power
isn't required. So -ENOIOCTLCMD from the v4l2_subdev_call should be
ignored.
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The struct clk_init_data init variable is declared in the isp_xclk_init()
function so is an automatic variable allocated in the stack. But it's not
explicitly zero-initialized, so some init fields are left uninitialized.
This causes the data structure to have undefined values that may confuse
the common clock framework when the clock is registered.
For example, the uninitialized .flags field could have the CLK_IS_CRITICAL
bit set, causing the framework to wrongly prepare the clk on registration.
This leads to the isp_xclk_prepare() callback being called, which in turn
calls to the omap3isp_get() function that increments the isp dev refcount.
Since this omap3isp_get() call is unexpected, this leads to an unbalanced
omap3isp_get() call that prevents the requested IRQ to be later enabled,
due the refcount not being 0 when the correct omap3isp_get() call happens.
Fixes: 9b28ee3c91 ("[media] omap3isp: Use the common clock framework")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The final version of the COMPILE_TEST patch for this driver missed
one warning about suspend/resume functions that can now appear
on platforms that don't always set CONFIG_PM:
drivers/media/platform/omap3isp/isp.c:1008:13: error: 'isp_resume_modules' defined but not used [-Werror=unused-function]
static void isp_resume_modules(struct isp_device *isp)
^~~~~~~~~~~~~~~~~~
drivers/media/platform/omap3isp/isp.c:974:12: error: 'isp_suspend_modules' defined but not used [-Werror=unused-function]
static int isp_suspend_modules(struct isp_device *isp)
This marks the respective functions as __maybe_unused as an easy
workaround.
Fixes: 243131134b ("media: omap3isp: Allow it to build with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
It is not required to implement job_ready().
Since this one is dummy, we can drop it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit f1a81afc98 ("[media] m2m: fix bad unlock balance")
removed the last use of v4l2_m2m_ops.lock and
v4l2_m2m_ops.unlock hooks. They are not actually
used anymore. Remove them.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As per the documentation, job_abort is not required
to wait until the current job finishes. It is redundant
to do so, as the core will perform the wait operation.
Remove the wait infrastructure completely.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Currently, rga_buf_start_streaming() is expecting
pm_runtime_get_sync to return zero on success, which
is wrong.
As per the documentation, pm_runtime_get_sync increments
the device's usage counter and return its result.
This means it will typically return a positive integer
on success and a negative error code.
Therefore, rockchip-rga driver is currently unusable
failing to start_streaming in most cases. Fix it and
while here, cleanup the buffer return-to-core logic.
Fixes: f7e7b48e6d ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jacob Chen <jacob-chen@iotwrt.com>
[hans.verkuil@cisco.com: fix line over 80 cols warning]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When checking a format for validity, the resolution is reset to 1280x720
whenever the pixel format is not supported. This behavior can mislead
user-space into believing that this is the only resolution supported,
and looks strange considering that if we try/set the same format with
just the pixel format changed to a valid one, the call will this time
succeed without altering the resolution.
Resolution is managed independently of the pixel format, so remove this
reset.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Name is already initialized by assignment from rga_videodev.
Signed-off-by: Anton Leontiev <scileont@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Name is already initialized by assignment from deinterlace_videodev.
Signed-off-by: Anton Leontiev <scileont@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Name is already initialized by assignment from emmaprp_videodev.
Signed-off-by: Anton Leontiev <scileont@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Name is already initialized by assignment from g2d_videodev.
Signed-off-by: Anton Leontiev <scileont@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Name is already initialized by assignment from vpe_videodev.
Signed-off-by: Anton Leontiev <scileont@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Name is already initialized by assignment from vim2m_videodev.
Signed-off-by: Anton Leontiev <scileont@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This does not fix any bug - this is just a code simplification. As
np is not used after passing it to v4l2_fwnode_endpoint_parse() its
refcount can be decremented immediately and at one location.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The endpoint allocated by of_graph_get_next_endpoint() needs an of_node_put()
in both error and success path. As ep is not used the refcount decrement
can be right after the last use of ep.
Fixes: commit 37404f91ef ("[media] stm32-dcmi: STM32 DCMI camera interface driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The while(1) is effectively useless as all possible paths within it
return thus there is no way to loop.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Do not wait for interrupt completion when stopping streaming,
stopping sensor and disabling interruptions are enough.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cleanup "active" field usage and enhance list management
to avoid exceptions when releasing buffers on error or
stopping streaming.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Return buffer to V4L2 in error state if DMA error occurs.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Return silently instead of falling into error when running
out of available buffers when restarting capture.
Capture will be restarted when new buffers will be
provided by V4L2 client.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Minor non-functional fixes around comments, variable namings
and trace point enhancement.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the SoC specific information for Renesas r8a77965.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When starting the VIN capture procedure we are not guaranteed that the
first buffer written to is VnMB1 to which we assigned the first buffer
queued. This is problematic for two reasons. Buffers might not be
dequeued in the same order they where queued for capture. Future
features planed for the VIN driver is support for outputting frames in
SEQ_TB/BT format and to do that it's important that capture starts from
the first buffer slot, VnMB1.
We are guaranteed that capturing always happens in sequence (VnMB1 ->
VnMB2 -> VnMB3 -> VnMB1). So drop up to two frames when starting
capturing so that the driver always returns buffers in the same order
they are queued and prepare for SEQ_TB/BT output.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for YUYV permutations, passing down to the subdevice the media bus
format with components ordering that reflect the output pixel format one.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The of_node_put() was only covering the error branch but missed the
success branch so the refcount for ep which
of_graph_get_remote_port_parent() incremented on success would was
not being decremented.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As there is no way this can loop it actually makes no sense to have
a while(1){} around the body - all three possible paths end in a return
statement.
Fixes: commit c1d82b8953 "[media] atmel-isi: move out of soc_camera to atmel"
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The omap media driver can be built-in while the v4l2 core is a loadable
module. This is a mistake and leads to link errors:
drivers/media/platform/omap/omap_vout.o: In function `omap_vout_remove':
omap_vout.c:(.text+0xec): undefined reference to `v4l2_device_unregister'
omap_vout.c:(.text+0x140): undefined reference to `video_device_release'
omap_vout.c:(.text+0x150): undefined reference to `video_unregister_device'
omap_vout.c:(.text+0x15c): undefined reference to `v4l2_ctrl_handler_free'
An explicit Kconfig dependency on VIDEO_V4L2 avoids the problem.
I ran into this problem for the first time today during my randconfig
builds, but could not find what caused it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Trivial fix to spelling mistake in module description text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The Renesas Fine Display Processor driver is used on Renesas R-Car SoCs
only. Since commit 9b5ba0df4e ("ARM: shmobile: Introduce
ARCH_RENESAS") is ARCH_RENESAS a more appropriate platform dependency
than the legacy ARCH_SHMOBILE, hence use the former.
This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near
future.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The cadence media drivers can be built-in while the v4l2 core is a loadable
module. This is a mistake and leads to link errors:
drivers/media/v4l2-core/v4l2-fwnode.o: In function `v4l2_async_register_subdev_sensor_common':
v4l2-fwnode.c:(.text+0x12f0): undefined reference to `v4l2_async_subdev_notifier_register'
v4l2-fwnode.c:(.text+0x1304): undefined reference to `v4l2_async_register_subdev'
v4l2-fwnode.c:(.text+0x1318): undefined reference to `v4l2_async_notifier_unregister'
v4l2-fwnode.c:(.text+0x1338): undefined reference to `v4l2_async_notifier_cleanup'
cdns-csi2rx.c:(.text+0x9f8): undefined reference to `v4l2_subdev_init'
cdns-csi2rx.c:(.text+0xa78): undefined reference to `v4l2_async_register_subdev'
drivers/media/platform/cadence/cdns-csi2tx.o: In function `csi2tx_remove':
cdns-csi2tx.c:(.text+0x88): undefined reference to `v4l2_async_unregister_subdev'
drivers/media/platform/cadence/cdns-csi2tx.o: In function `csi2tx_probe':
cdns-csi2tx.c:(.text+0x884): undefined reference to `v4l2_subdev_init'
cdns-csi2tx.c:(.text+0xa9c): undefined reference to `v4l2_async_register_subdev'
An explicit Kconfig dependency on VIDEO_V4L2 avoids the problem.
Fixes: 1fc3b37f34 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
