It will be needed by bpf selftest for resolve_btfids tool.
Also adding __PASTE macro as btf_ids.h dependency, which is
defined in:
include/linux/compiler_types.h
but because tools/include do not have this header, I'm putting
the macro into linux/compiler.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-9-jolsa@kernel.org
The resolve_btfids tool will be used during the vmlinux linking,
so it's necessary it's ready for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
The resolve_btfids tool scans elf object for .BTF_ids section
and resolves its symbols with BTF ID values.
It will be used to during linking time to resolve arrays of BTF
ID values used in verifier, so these IDs do not need to be
resolved in runtime.
The expected layout of .BTF_ids section is described in main.c
header. Related kernel changes are coming in following changes.
Build issue reported by 0-DAY CI Kernel Test Service.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200711215329.41165-2-jolsa@kernel.org
Fix bogus close warning that occurs when opening the character device
fails.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix bogus close warning that occurs when opening the character device
fails.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix bogus close warning that occurs when opening the character device
fails.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
Since the BPF_PROG_TYPE_CGROUP_SOCKOPT verifier test does not set an
attach type, bpf_prog_load_check_attach() disallows loading the program
and the test is always skipped:
#434/p perfevent for cgroup sockopt SKIP (unsupported program type 25)
Fix the issue by setting a valid attach type.
Fixes: 0456ea170c ("bpf: Enable more helpers for BPF_PROG_TYPE_CGROUP_{DEVICE,SYSCTL,SOCKOPT}")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200710150439.126627-1-jean-philippe@linaro.org
There should be no difference between -1 and other negative syscalls
while tracing.
Cc: Keno Fischer <keno@juliacomputing.com>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The FIXTURE*() macro kern-doc examples had the wrong names for the C code
examples associated with them. Fix those and clarify that FIXTURE_DATA()
usage should be avoided.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: 74bc7c97fa ("kselftest: add fixture variants")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
The user_trap_syscall() helper creates a filter with
SECCOMP_RET_USER_NOTIF. To avoid confusion with SECCOMP_RET_TRAP, rename
the helper to user_notif_syscall().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp tests are a bit noisy without CONFIG_CHECKPOINT_RESTORE (due
to missing the kcmp() syscall). The seccomp tests are more accurate with
kcmp(), but it's not strictly required. Refactor the tests to use
alternatives (comparing fd numbers), and provide a central test for
kcmp() so there is a single SKIP instead of many. Continue to produce
warnings for the other tests, though.
Additionally adds some more bad flag EINVAL tests to the addfd selftest.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp benchmark calibration loop did not need to take so long.
Instead, use a simple 1 second timeout and multiply up to target. It
does not need to be accurate.
Signed-off-by: Kees Cook <keescook@chromium.org>
As seccomp_benchmark tries to calibrate how many samples will take more
than 5 seconds to execute, it may end up picking up a number of samples
that take 10 (but up to 12) seconds. As the calibration will take double
that time, it takes around 20 seconds. Then, it executes the whole thing
again, and then once more, with some added overhead. So, the thing might
take more than 40 seconds, which is too close to the 45s timeout.
That is very dependent on the system where it's executed, so may not be
observed always, but it has been observed on x86 VMs. Using a 90s timeout
seems safe enough.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/r/20200601123202.1183526-1-cascardo@canonical.com
Signed-off-by: Kees Cook <keescook@chromium.org>
It's useful to see how much (at a minimum) each filter adds to the
syscall overhead. Add additional calculations.
Signed-off-by: Kees Cook <keescook@chromium.org>
The TSYNC ESRCH flag test will fail for regular users because NNP was
not set yet. Add NNP setting.
Fixes: 51891498f2 ("seccomp: allow TSYNC and USER_NOTIF together")
Cc: stable@vger.kernel.org
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Kees Cook <keescook@chromium.org>
Running the seccomp tests as a regular user shouldn't just fail tests
that require CAP_SYS_ADMIN (for getting a PID namespace). Instead,
detect those cases and SKIP them. Additionally, gracefully SKIP missing
CONFIG_USER_NS (and add to "config" since we'd prefer to actually test
this case).
Signed-off-by: Kees Cook <keescook@chromium.org>
The kselftests will be renaming XFAIL to SKIP in the test harness, and
to avoid painful conflicts, rename XFAIL to SKIP now in a future-proofed
way.
Signed-off-by: Kees Cook <keescook@chromium.org>
Add validating the UDP tunnel infra works.
$ ./udp_tunnel_nic.sh
PASSED all 383 checks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This Kselftest fixes update for Linux 5.8-rc5 consists of tmp2 test
changes to run on python3 and kselftest framework fix to incorrect
return type.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl8ImAcACgkQCwJExA0N
QxwEPg//fYS/ilgwYRn+Zc9fV/JPGYBfJKN1DdAua0fRgXjcz2z3dMON7Tt/HBNY
KZDCDJMY4SSPBAdHRt/2duQx21C0i8zVcCBsPgZPhJdPF5tUIbD4oM0qCxrto1hB
Wss1UHWmobB+BPI7mJSPFirYXyVqVXcpdYJmKkRYbpJTFRS2t1g5jFczZVgEbeEv
7lEY4yRi2hlGsCR4J+VqIUzyY+enc0vSYNaSaH8d4P1cC8h5Dl7MoqSIJshrNcDe
kHz5l5R7cQSOQhsSIwvRuEolkmjyB0ejzuUsAQ6fwRKGMTVWlY+2fWcu5dNelYMm
C3BGyVcAPXsrMfX6Vw4AFRd1a/7XiuNOFwH4PkQeomfAh2Ml9m1pO3fdqWQlbnHu
VpkIbPaiTyarEaIYvF6UnxUTB+hNzHxw8Ac6TvwP3xz26k7U4X4ue75s03DVA7qx
63EsxY+gtAhD0ATUSpHq65ZgUSnQh5OAk0UB24h7kzxaE5EZ8gU8ifYqBPGiEot2
3KQ1QLZdCTmuTxsjI+OdXdOAnFuhqNtzk69CCS43YwDJitBLG6kz+aFgVWDZxkx1
MY5msDi/ROyymiWEUCSZhE70qIhIU/tDKQ9+QeL4VqEhzfcGrgePtV+dsp6seKCl
Swi2PY2zoCdq6gZshiiIQln/M5XaW8dPBvz+wKaRo/sMzwts18M=
=pKoZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"TPM2 test changes to run on python3 and kselftest framework fix to
incorrect return type"
* tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: ksft_test_num return type should be unsigned
selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
Coverity's static analysis helpfully reported a memory leak introduced by
0f0e55d824 ("libbpf: Improve BTF sanitization handling"). While fixing it,
I realized that btf__new() already creates a memory copy, so there is no need
to do this. So this patch also fixes misleading btf__new() signature to make
data into a `const void *` input parameter. And it avoids unnecessary memory
allocation and copy in BTF sanitization code altogether.
Fixes: 0f0e55d824 ("libbpf: Improve BTF sanitization handling")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200710011023.1655008-1-andriin@fb.com
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type
and returned value was much outside hashmap capacity.
As advised by Andrii Nakryiko, this patch uses different hashing variant for
architectures with size_t shorter than long long.
Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200709225723.1069937-1-andriin@fb.com
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test port split configuration using previously added number of port lanes
attribute.
Check that all the splittable ports are successfully split to their maximum
number of lanes and below, and that those which are not splittable fail to
be split.
Test output example:
TEST: swp4 is unsplittable [ OK ]
TEST: split port swp53 into 4 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
TEST: split port swp53 into 2 [ OK ]
TEST: Unsplit port pci/0000:03:00.0/25 [ OK ]
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks against
file->f_cred for modules, kprobes, and bpf.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl8GUbMWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohnD/9VsPsAMV+8lhsPvkcuW/DkTcAY
qUEzsXU3v06gJ0Z/1lBKtisJ6XmD93wWcZCTFvJ0S8vR3yLZvOVfToVjCMO32Trc
4ZkWTPwpvfeLug6T6CcI2ukQdZ/opI1cSabqGl79arSBgE/tsghwrHuJ8Exkz4uq
0b7i8nZa+RiTezwx4EVeGcg6Dv1tG5UTG2VQvD/+QGGKneBlrlaKlI885N/6jsHa
KxvB7+8ES1pnfGYZenx+RxMdljNrtyptbQEU8gyvoV5YR7635gjZsVsPwWANJo+4
EGcFFpwWOAcVQaC3dareLTM8nVngU6Wl3Rd7JjZtjvtZba8DdCn669R34zDGXbiP
+1n1dYYMSMBeqVUbAQfQyLD0pqMIHdwQj2TN8thSGccr2o3gNk6AXgYq0aYm8IBf
xDCvAansJw9WqmxErIIsD4BFkMqF7MjH3eYZxwCPWSrKGDvKxQSPV5FarnpDC9U7
dYCWVxNPmtn+unC/53yXjEcBepKaYgNR7j5G7uOfkHvU43Bd5demzLiVJ10D8abJ
ezyErxxEqX2Gr7JR2fWv7iBbULJViqcAnYjdl0y0NgK/hftt98iuge6cZmt1z6ai
24vI3X4VhvvVN5/f64cFDAdYtMRUtOo2dmxdXMid1NI07Mj2qFU1MUwb8RHHlxbK
8UegV2zcrBghnVuMkw==
=ib5Q
-----END PGP SIGNATURE-----
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
basic functional test, triggering the msk diag interface
code. Require appropriate iproute2 support, skip elsewhere.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we don't regress the CAP_SYSLOG behavior of the module address
visibility via /proc/modules nor /sys/module/*/sections/*.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Switch perf_buffer test to use skeleton to avoid use of bpf_prog_load() and
make test a bit more succinct. Also switch BPF program to use tracepoint
instead of kprobe, as that allows to support older kernels, which had
tracepoint support before kprobe support in the form that libbpf expects
(i.e., libbpf expects /sys/bus/event_source/devices/kprobe/type, which doesn't
always exist on old kernels).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-7-andriin@fb.com
perf_buffer__new() is relying on BPF_OBJ_GET_INFO_BY_FD availability for few
sanity checks. OBJ_GET_INFO for maps is actually much more recent feature than
perf_buffer support itself, so this causes unnecessary problems on old kernels
before BPF_OBJ_GET_INFO_BY_FD was added.
This patch makes those sanity checks optional and just assumes best if command
is not supported. If user specified something incorrectly (e.g., wrong map
type), kernel will reject it later anyway, except user won't get a nice
explanation as to why it failed. This seems like a good trade off for
supporting perf_buffer on old kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-6-andriin@fb.com
Add a test that relies on CO-RE, but doesn't expect any of the recent
features, not available on old kernels. This is useful for Travis CI tests
running against very old kernels (e.g., libbpf has 4.9 kernel testing now), to
verify that CO-RE still works, even if kernel itself doesn't support BTF yet,
as long as there is .BTF embedded into vmlinux image by pahole. Given most of
CO-RE doesn't require any kernel awareness of BTF, it is a useful test to
validate that libbpf's BTF sanitization is working well even with ancient
kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-5-andriin@fb.com
Change sanitization process to preserve original BTF, which might be used by
libbpf itself for Kconfig externs, CO-RE relocs, etc, even if kernel is old
and doesn't support BTF. To achieve that, if libbpf detects the need for BTF
sanitization, it would clone original BTF, sanitize it in-place, attempt to
load it into kernel, and if successful, will preserve loaded BTF FD in
original `struct btf`, while freeing sanitized local copy.
If kernel doesn't support any BTF, original btf and btf_ext will still be
preserved to be used later for CO-RE relocation and other BTF-dependent libbpf
features, which don't dependon kernel BTF support.
Patch takes care to not specify BTF and BTF.ext features when loading BPF
programs and/or maps, if it was detected that kernel doesn't support BTF
features.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-4-andriin@fb.com
Add setter for BTF FD to allow application more fine-grained control in more
advanced scenarios. Storing BTF FD inside `struct btf` provides little benefit
and probably would be better done differently (e.g., btf__load() could just
return FD on success), but we are stuck with this due to backwards
compatibility. The main problem is that it's impossible to load BTF and than
free user-space memory, but keep FD intact, because `struct btf` assumes
ownership of that FD upon successful load and will attempt to close it during
btf__free(). To allow callers (e.g., libbpf itself for BTF sanitization) to
have more control over this, add btf__set_fd() to allow to reset FD
arbitrarily, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-3-andriin@fb.com
With valid ELF and valid BTF, there is no reason (apart from bugs) why BTF
finalization should fail. So make it strict and return error if it fails. This
makes CO-RE relocation more reliable, as they are not going to be just
silently skipped, if BTF finalization failed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-2-andriin@fb.com
There are a number of places in test_progs that use minus-1 as the argument
to exit(). This is confusing as a process exit status is masked to be a
number between 0 and 255 as defined in man exit(3). Thus, users will see
status 255 instead of minus-1.
This patch use positive exit code 3 instead of minus-1. These cases are put
in the same group of infrastructure setup errors.
Fixes: fd27b1835e ("selftests/bpf: Reset process and thread affinity after each test/sub-test")
Fixes: 811d7e375d ("bpf: selftests: Restore netns after each test")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
This is a follow up adjustment to commit 6c92bd5cd4 ("selftests/bpf:
Test_progs indicate to shell on non-actions"), that returns shell exit
indication EXIT_FAILURE (value 1) when user selects a non-existing test.
The problem with using EXIT_FAILURE is that a shell script cannot tell
the difference between a non-existing test and the test failing.
This patch uses value 2 as shell exit indication.
(Aside note unrecognized option parameters use value 64).
Fixes: 6c92bd5cd4 ("selftests/bpf: Test_progs indicate to shell on non-actions")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
emit_obj_refs_json needs to added the same as with emit_obj_refs_plain
to prevent segfaults, similar to Commit "8ae4121bd89e bpf: Fix bpftool
without skeleton code enabled"). See the error below:
# ./bpftool -p prog
{
"error": "bpftool built without PID iterator support"
},[{
"id": 2,
"type": "cgroup_skb",
"tag": "7be49e3934a125ba",
"gpl_compatible": true,
"loaded_at": 1594052789,
"uid": 0,
"bytes_xlated": 296,
"jited": true,
"bytes_jited": 203,
"bytes_memlock": 4096,
"map_ids": [2,3
Segmentation fault (core dumped)
The same happens for ./bpftool -p map, as well as ./bpftool -j prog/map.
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200708110827.7673-1-louis.peens@netronome.com
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.
We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.
In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.
Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.
The latest (in a long string) of reasons for minimum compiler version
upgrades was commit 5435f73d5c ("efi/x86: Fix build with gcc 4").
Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on
old RHEL versions persumably also don't build their own kernels anyway.
And maybe they should cross-built or just have a little side affair with
a newer compiler?
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that pidfds support CLONE_NEWTIME as well enable testing them in the
setns() testuite.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20200706154912.3248030-5-christian.brauner@ubuntu.com
samples/bpf no longer use bpf_map_def_legacy and instead use the
libbpf's bpf_map_def or new BTF-defined MAP format. This commit removes
unused bpf_map_def_legacy struct from selftests/bpf/bpf_legacy.h.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200707184855.30968-5-danieltimlee@gmail.com
Simple test that enforces a single SOCK_DGRAM socket per cgroup.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-5-sdf@google.com
Support attaching to BPF_CGROUP_INET_SOCK_RELEASE and properly
display attach type upon prog dump.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-4-sdf@google.com
Add auto-detection for the cgroup/sock_release programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-3-sdf@google.com
- Intel PT fixes for PEBS-via-PT with registers.
- Fixes for Intel PT python based GUI.
- Avoid duplicated sideband events with Intel PT in system wide tracing.
- Remove needless 'dummy' event from TUI menu, used when synthesizing
meta data events for pre-existing processes.
- Fix corner case segfault when pressing enter in a screen without
entries in the TUI for report/top.
- Fixes for time stamp handling in libtraceevent.
- Explicitly set utf-8 encoding in perf flamegraph.
- Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
silencing perf build warning.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
Some of the most recent, experimental distros are failing, fixes will be
provided, but those gcc/clang versions are not yet in general use and some
are related to linking with libllvm, not the default build.
Mon 06 Jul 2020 10:07:28 AM -03
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0-rc3.tar.xz
# dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:5 : Ok gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
19 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
20 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
21 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
22 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.1.1 20200618 releases/gcc-10.1.0-218-g6e81b0cf4f, clang version 10.0.0
23 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
24 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
25 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
26 debian:experimental : FAIL gcc (Debian 9.3.0-13) 9.3.0, clang version 9.0.1-12
# grep "make ARCH" dm.log/debian\:experimental
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
<SNIP>
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_ignoringImpCasts0Matcher::matches(clang::Expr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x43): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasLoopVariable0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasRangeInit0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal28matcher_hasRangeInit0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal28matcher_hasRangeInit0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasArgumentOfType0Matcher::matches(clang::UnaryExprOrTypeTraitExpr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal33matcher_hasArgumentOfType0Matcher7matchesERKNS_24UnaryExprOrTypeTraitExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal33matcher_hasArgumentOfType0Matcher7matchesERKNS_24UnaryExprOrTypeTraitExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x36): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
<SNIP>
#
27 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
28 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
29 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
30 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
31 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
32 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
33 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
34 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
35 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
36 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
37 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
38 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
39 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
40 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
41 fedora:30 : Ok gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
42 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
44 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
45 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-1.fc32)
46 fedora:rawhide : FAIL gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-4.fc33)
CC /tmp/build/perf/util/mem2node.o
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
47 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.2.0-r2 p3) 9.2.0
48 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
49 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
50 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
51:latestError: error creating container storage: the container name "cool_zhukovsky" is already in use by "bebca2836e01c65d0c08a2c93fd96fb4b22b1d5b7e5945c8c21cd313823cd5a3". You have to remove that container to be able to reuse that name.: that name is already in use
22aro:latest : Ok , clang version 9.0.0 (tags/RELEASE_900/final)
52 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
53 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
54 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
55 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
56 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
57 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2], clang version 10.0.0
58 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
59 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
60 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
61 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
62 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
63 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
64 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
70 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
71 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
76 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
79 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
80 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
81 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
82 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
83 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
86 ubuntu:19.10 : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
[root@quaco ~]# grep "make ARCH" dm.log/ubuntu\:19.10
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
<SNIP>
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::BindableMatcher<clang::Stmt> clang::ast_matchers::internal::VariadicFunction<clang::ast_matchers::internal::BindableMatcher<clang::Stmt>, clang::ast_matchers::internal::Matcher<clang::Expr>, &(clang::ast_matchers::internal::BindableMatcher<clang::Stmt> clang::ast_matchers::internal::makeDynCastAllOfComposite<clang::Stmt, clang::Expr>(llvm::ArrayRef<clang::ast_matchers::internal::Matcher<clang::Expr> const*>))>::operator()<clang::ast_matchers::internal::VariadicOperatorMatcher<clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::TypeLoc>, clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::Stmt> > >(clang::ast_matchers::internal::Matcher<clang::Expr> const&, clang::ast_matchers::internal::VariadicOperatorMatcher<clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::TypeLoc>, clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::Stmt> > const&) const':
(.text._ZNK5clang12ast_matchers8internal16VariadicFunctionINS1_15BindableMatcherINS_4StmtEEENS1_7MatcherINS_4ExprEEEXadL_ZNS1_25makeDynCastAllOfCompositeIS4_S7_EENS3_IT_EEN4llvm8ArrayRefIPKNS6_IT0_EEEEEEEclIJNS1_23VariadicOperatorMatcherIJNS1_27ArgumentAdaptingMatcherFuncINS1_18HasAncestorMatcherENS1_8TypeListIJNS_4DeclENS_22NestedNameSpecifierLocES4_NS_7TypeLocEEEESS_E7AdaptorISR_EENSU_IS4_EEEEEEEES5_RKS8_DpRKT_[_ZNK5clang12ast_matchers8internal16VariadicFunctionINS1_15BindableMatcherINS_4StmtEEENS1_7MatcherINS_4ExprEEEXadL_ZNS1_25makeDynCastAllOfCompositeIS4_S7_EENS3_IT_EEN4llvm8ArrayRefIPKNS6_IT0_EEEEEEEclIJNS1_23VariadicOperatorMatcherIJNS1_27ArgumentAdaptingMatcherFuncINS1_18HasAncestorMatcherENS1_8TypeListIJNS_4DeclENS_22NestedNameSpecifierLocES4_NS_7TypeLocEEEESS_E7AdaptorISR_EENSU_IS4_EEEEEEEES5_RKS8_DpRKT_]+0x4e): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::dynCastTo(clang::ast_type_traits::ASTNodeKind) const'
<SNIP>
87 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
# uname -a
Linux quaco 5.8.0-rc3+ #2 SMP Tue Jun 30 09:47:17 -03 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
bee9ca1c8a perf report TUI: Remove needless 'dummy' event from menu
# perf version --build-options
perf version 5.8.rc3.gbee9ca1c8a23
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : Ok
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Skip (some metrics failed)
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : FAILED!
see below
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Skip
42.2: BPF pinning : Skip
42.3: BPF prologue generation : Skip
42.4: BPF relocation checker : Skip
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: x86 rdpmc : Ok
68: Convert perf time to TSC : Ok
69: DWARF unwind : Ok
70: x86 instruction decoder - new instructions : Ok
71: Intel PT packet decoder : Ok
72: x86 bp modify : Ok
73: probe libc's inet_pton & backtrace it with ping : Ok
74: Use vfs_getname probe to get syscall args filenames : Ok
75: Add vfs_getname probe to get syscall args filenames : Ok
76: Check open filename arg using perf trace + vfs_getname: Ok
77: Zstd perf.data compression/decompression : Ok
This started failing most of the time with recent kernels, being investigated:
# perf test -v object |& tail
On file address is: 0xc736ba
Objdump command is: objdump -z -d --start-address=0xffffffff81a736ba --stop-address=0xffffffff81a7373a /lib/modules/5.8.0-rc3+/build/vmlinux
Bytes read match those read by objdump
Reading object code for memory address: 0xffffffffc028d010
File is: /lib/modules/5.8.0-rc3+/kernel/arch/x86/crypto/crc32c-intel.ko
On file address is: 0xffffffffc028d0a0
dso__data_read_offset failed
test child finished with -1
---- end ----
Object code reading: FAILED!
#
Noticed so far only with crc32c-intel.ko, seems related to:
02213cec64 ("perf maps: Mark module DSOs with kernel type")
Investigation ongoing.
$ git log --oneline -1 ; time make -C tools/perf build-test
bee9ca1c8a (HEAD -> perf/urgent, quaco/perf/urgent) perf report TUI: Remove needless 'dummy' event from menu
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_clean_all_O: make clean all
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_sdt_O: make NO_SDT=1
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_tags_O: make tags
make_no_slang_O: make NO_SLANG=1
make_perf_o_O: make perf.o
make_no_libbpf_O: make NO_LIBBPF=1
make_debug_O: make DEBUG=1
make_with_libpfm4_O: make LIBPFM4=1
make_no_newt_O: make NO_NEWT=1
make_no_demangle_O: make NO_DEMANGLE=1
make_no_gtk2_O: make NO_GTK2=1
make_install_prefix_O: make install prefix=/tmp/krava
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_help_O: make help
make_no_auxtrace_O: make NO_AUXTRACE=1
make_util_map_o_O: make util/map.o
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_doc_O: make doc
make_pure_O: make
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_libperl_O: make NO_LIBPERL=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_install_bin_O: make install-bin
make_install_O: make install
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_libelf_O: make NO_LIBELF=1
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXwTWegAKCRCyPKLppCJ+
J/4VAQCI6b9KdpTOhoMJTI6qyQDA68JsACOSYisbeSskFOv1zgD9F45oFMpAzFvG
OsF81U2q+9DcjBHe8UlPrDbjUEGyfwo=
=l1jZ
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Intel PT fixes for PEBS-via-PT with registers
- Fixes for Intel PT python based GUI
- Avoid duplicated sideband events with Intel PT in system wide tracing
- Remove needless 'dummy' event from TUI menu, used when synthesizing
meta data events for pre-existing processes
- Fix corner case segfault when pressing enter in a screen without
entries in the TUI for report/top
- Fixes for time stamp handling in libtraceevent
- Explicitly set utf-8 encoding in perf flamegraph
- Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
silencing perf build warning
* tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf report TUI: Remove needless 'dummy' event from menu
perf intel-pt: Fix PEBS sample for XMM registers
perf intel-pt: Fix displaying PEBS-via-PT with registers
perf intel-pt: Fix recording PEBS-via-PT with registers
perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()
tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling
tools lib traceevent: Add API to read time information from kbuffer
perf scripts python: exported-sql-viewer.py: Fix time chart call tree
perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result
perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result
perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result
perf record: Fix duplicated sideband events with Intel PT system wide tracing
perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
perf flamegraph: Explicitly set utf-8 encoding
The check if there are any files to install in case of no files
compares "X " with "X" so never false.
Remove extra spaces. It may make sense to use make's $(if) function
here.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Using one shell for the whole recipe with long lists can cause
make[1]: execvp: /bin/sh: Argument list too long
with some shells. Triggered by commit 309b81f0fd ("selftests/bpf:
Install generated test progs")
It requires to change the rule which rely on the one shell
behaviour (run_tests).
Simplify also INSTALL_SINGLE_RULE, remove extra echo, required to
workaround .ONESHELL.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Similar to how ENOSYS causes a skip if pidfd_send_signal is not present,
we can do the same for unshare if it fails with EPERM. This way, running
the test without privileges causes four tests to skip but no early bail out.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Use ksft_test_result_skip instead.
The plan passed to ksft_set_plan was wrong, too, so fix it while at it.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix NULL but dereferenced coccicheck errors found by:
make coccicheck MODE=report M=tools/power/cpupower
tools/power/cpupower/lib/cpufreq.c:384:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:440:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:308:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:753:19-23: ERROR: first is NULL but dereferenced.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use a share memory segment to pass string information between forked
test and the test runner for the skip reason.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since forever the harness output for signed value tests have reported
unsigned values to avoid casting. Instead, actually test the variable
types and perform the correct casts and choose the correct format
specifiers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Using the kselftest_harness.h would result in non-TAP test reporting,
which didn't make much sense given that all the requirements for using
the low-level API were met. Switch to using ksft_*() helpers while
retaining as much of a human-readability as possible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add "how to use this API" documentation to kselftest.h, and include some
addition helpers and notes to make things easier to use.
Additionally removes the incorrect "Bail out!" line from the standard exit
path. The TAP13 specification says that "Bail out!" should be used when
giving up before all tests have been run. For a "normal" execution run,
the selftests should not report "Bail out!".
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The binderfs test mixed the full harness API and the selftest API.
Adjust to use only the harness API so that the harness API can switch
to using the selftest API internally in future patches.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove unused includes of the kselftest.h header.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Selftest output reporting was happening before the TAP headers and plan
had been emitted. Move the first test reports later.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Move it before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Use ksft_test_result_skip when possible, or just bail out if
memory corruption is detected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Calling ksft_exit_skip after ksft_set_plan results in executing fewer tests
than planned. Use ksft_test_result_skip for the individual tests.
The call in suspend() is fine, but ksft_set_plan should be after it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The computation of the test plan uses the available_cpus bitset
before calling sched_getaffinity to fill it in. The resulting
plan is bogus, fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to the TAP specification, a skipped test must be marked as "ok"
and annotated with the SKIP directive, for example
ok 23 # skip Insufficient flogiston pressure.
(https://testanything.org/tap-specification.html)
Fix the kselftest infrastructure to match this.
For ksft_exit_skip, it is preferrable to emit a dummy plan line that
indicates the whole test was skipped, but this is not always possible
because of ksft_exit_skip being used as a "shortcut" by the tests.
In that case, print the test counts and a normal "ok" line. The format
is now the same independent of whether msg is NULL or not (but it is
never NULL in any caller right now).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes a compiler warning:
In file included from sync_test.c:37:
../kselftest.h: In function ‘ksft_print_cnts’:
../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
if (ksft_plan != ksft_test_num())
^~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Python 2 is no longer supported by the Python upstream project, so
upgrade TPM2 tests to Python 3.
Fixed minor merge conflicts
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When investigating performance issues that involve latency / loss /
reordering it is useful to have the pcap from the sender-side as it
allows to easier infer the state of the sender's congestion-control,
loss-recovery, etc.
Allow the selftests to capture a pcap on both sender and receiver so
that this information is not lost when reproducing.
This patch also improves the file names. Instead of:
ns4-5ee79a56-X4O6gS-ns3-5ee79a56-X4O6gS-MPTCP-MPTCP-10.0.3.1.pcap
We now have something like for the same test:
5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-connector.pcap
5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-listener.pcap
It was a connection from ns3 to ns4, better to start with ns3 then. The
port is also added, easier to find the trace we want.
Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixing the common case of:
perf record
perf report
And getting just the cycles events.
We now have a 'dummy' event to get perf metadata events that take place
while we synthesize metadata records for pre-existing processes by
traversing procfs, so we always have this extra 'dummy' evsel, but we
don't have to offer it as there will be no samples on it, remove this
distraction.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The condition to add XMM registers was missing, the regs array needed to
be in the outer scope, and the size of the regs array was too small.
Fixes: 143d34a6b3 ("perf intel-pt: Add XMM registers to synthesized PEBS sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g.
# perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data ]
# ./perf script --itrace=eop -F+iregs
Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
Fix by using allow_user_set, which is true when recording AUX area data.
Fixes: 9e64cefe43 ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.
# perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
Error:
intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
Fix by suppressing register sampling on the intel_pt evsel.
Committer notes:
Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.
Fixes: 9e64cefe43 ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The segmentation fault can be reproduced as following steps:
1) Executing perf report in tui.
2) Typing '/xxxxx' to filter the symbol to get nothing matched.
3) Pressing enter with no entry selected.
Then it will report a segmentation fault.
It is caused by the lack of check of browser->he_selection when
accessing it's member res_samples in perf_evsel__hists_browse().
These processes are meaningful for specified samples, so we can skip
these when nothing is selected.
Fixes: 4968ac8fb7 ("perf report: Implement browsing of individual samples")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: http://lore.kernel.org/lkml/20200612094322.39565-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200705214457.28433-1-grandmaster@al2klimov.de
[ wei: change subject line to be more specific ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space
value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not support
it crash even when the MSR is written to 0 which is the default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN PV
does not implement ESPFIX64
-----BEGIN PGP SIGNATURE-----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=lI9c
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user
space value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not
support it crash even when the MSR is written to 0 which is the
default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come
back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN
PV does not implement ESPFIX64"
* tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
selftests/x86: Consolidate and fix get/set_eflags() helpers
selftests/x86/syscall_nt: Clear weird flags after each test
selftests/x86/syscall_nt: Add more flag combinations
x86/entry/64/compat: Fix Xen PV SYSENTER frame setup
x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C
x86/entry: Assert that syscalls are on the right stack
x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted
x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
Before, clang version 9 threw errors such as: error:
use of GNU old-style field designator extension [-Werror,-Wgnu-designator]
{ tstamp: true, swtstamp: true }
^~~~~~~
.tstamp =
Fix these warnings in tools/testing/selftests/net in the same manner as
commit 121e357ac7 ("selftests/harness: Update named initializer syntax").
N.B. rxtimestamp.c is the only affected file in the directory.
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-07-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).
The main changes are:
1) bpftool ability to show PIDs of processes having open file descriptors
for BPF map/program/link/BTF objects, relying on BPF iterator progs
to extract this info efficiently, from Andrii Nakryiko.
2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
seq_files, from Yonghong Song.
3) Support access to BPF map fields in struct bpf_map from programs
through BTF struct access, from Andrey Ignatov.
4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
via seq_file from BPF iterator progs, from Song Liu.
5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
helper, from Dmitry Yakunin.
6) Optimize BPF sk_storage selection of its caching index, from Martin
KaFai Lau.
7) Removal of redundant synchronize_rcu()s from BPF map destruction which
has been a historic leftover, from Alexei Starovoitov.
8) Several improvements to test_progs to make it easier to create a shell
loop that invokes each test individually which is useful for some CIs,
from Jesper Dangaard Brouer.
9) Fix bpftool prog dump segfault when compiled without skeleton code on
older clang versions, from John Fastabend.
10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the options --ipv4, --ipv6 to specify running over ipv4 and/or
ipv6. If neither is specified, then run both.
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF selftests show a compilation error as follows:
libbpf: invalid relo for 'entries' in special section 0xfff2; forgot to
initialize global var?..
Fix it by initializing 'entries' to zeros.
Fixes: c7568114bc ("selftests/bpf: Add bpf_iter test with bpf_get_task_stack()")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200703181719.3747072-1-songliubraving@fb.com
Fix segfault from bpftool by adding emit_obj_refs_plain when skeleton
code is disabled.
Tested by deleting BUILD_BPF_SKELS in Makefile. We found this doing
backports for Cilium when a testing image pulled in latest bpf-next
bpftool, but kept using an older clang-7.
# ./bpftool prog show
Error: bpftool built without PID iterator support
3: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2020-07-01T08:01:29-0700 uid 0
Segmentation fault
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Reported-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159375071997.14984.17404504293832961401.stgit@john-XPS-13-9370
Kernel commit dc4e2801d4 (ring-buffer: Redefine the unimplemented
RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work
- after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP
type causes the time delta to be used as a timestamp rather than a delta
to be added to the timestamp.
The trace-cmd code didn't get updated to handle this, so misinterprets
the event data for this case, which causes a cascade of errors,
including trace-report not being able to identify synthetic (or any
other) events generated by the histogram code (which uses TIME_STAMP
mode). For example, the following triggers along with the trace-cmd
shown cause an UNKNOWN_EVENT error and trace-cmd report crash:
# echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
# trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5
# trace-cmd report
CPU 0 is empty
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8
ug! no event found for type 0
[UNKNOWN TYPE 0]
ug! no event found for type 11520
Segmentation fault (core dumped)
After this patch we get the correct interpretation and the events are
shown properly:
# trace-cmd report
CPU 0 is empty
CPU 1 is empty
CPU 2 is empty
CPU 3 is empty
CPU 5 is empty
CPU 6 is empty
CPU 7 is empty
cpus=8
<idle>-0 [004] 23284.341392: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23284.341464: wakeup_latency: lat=58, pid=12031, comm=ping
<idle>-0 [004] 23285.365303: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23285.365382: wakeup_latency: lat=64, pid=12031, comm=ping
<idle>-0 [004] 23286.389290: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23286.389378: wakeup_latency: lat=72, pid=12031, comm=ping
<idle>-0 [004] 23287.413213: sched_wakeup: ping:12031 [120] success=1 CPU:004
<idle>-0 [004] 23287.413291: wakeup_latency: lat=64, pid=12031, comm=ping
Link: http://lkml.kernel.org/r/1567628224.13841.4.camel@kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-3-tz.stoyanov@gmail.com
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Ported from trace-cmd.git ]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200702185703.785094515@goodmis.org
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to
get the timing data stored in the ring buffer that is used to produced
the time stamps of the records.
This is useful for tools like trace-cmd to be able to display the
content of the read data to understand why the records show the time
stamps that they do.
Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-2-tz.stoyanov@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[ Ported from trace-cmd.git ]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200702185703.619656282@goodmis.org
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Charts -> Time chart by CPU
Move mouse over middle of chart
Right-click and select Show Call Tree
Before: displays Call Tree but not expanded to selected time
After: displays Call Tree expanded to selected time
Fixes: e69d5df75d ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using ctrl-F ('Find') would not find 'unknown' because it matches id
zero. Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Call Tree
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: displays 'unknown' not found
After: tree is expanded to line showing 'unknown'
Fixes: ae8b887c00 ("perf scripts python: exported-sql-viewer.py: Add call tree")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero.
Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: gets stuck
After: tree is expanded to line showing 'unknown'
Fixes: 254c0d820b ("perf scripts python: exported-sql-viewer.py: Factor out CallGraphModelBase")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find')
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree
Press: Ctrl-F
Enter: main
Press: Enter
Before: line showing 'main' does not display
After: tree is expanded to line showing 'main'
Fixes: ebd70c7dc2 ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0a892c1c94 ("perf record: Add dummy event during system wide
synthesis") reveals an issue with Intel PT system wide tracing.
Specifically that Intel PT already adds a dummy tracking event, and it
is not the first event. Adding another dummy tracking event causes
duplicated sideband events. Fix by checking for an existing dummy
tracking event first.
Example showing duplicated switch events:
Before:
# perf record -a -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.895 MB perf.data ]
# perf script --no-itrace --show-switch-events | head
swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_sched 11 [007] 6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_sched 11 [007] 6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
swapper 0 [002] 6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559
swapper 0 [002] 6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559
After:
# perf record -a -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.868 MB perf.data ]
# perf script --no-itrace --show-switch-events | head
swapper 0 [005] 6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 7179/7181
perf 7181 [005] 6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
perf 7181 [005] 6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [005] 6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 7179/7181
swapper 0 [005] 6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_sched 11 [005] 6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
rcu_sched 11 [005] 6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [005] 6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11
swapper 0 [005] 6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11
rcu_sched 11 [005] 6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200629091955.17090-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To bring in the change made in this cset:
e3a9e681ad ("x86/entry: Fixup bad_iret vs noinstr")
This doesn't cause any functional changes to tooling, just a rebuild.
Addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This kselftest fixes update for Linux 5.8-rc4 consists of tpm test
fixes from arkko Sakkinen.
-----BEGIN PGP SIGNATURE-----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=RDv/
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"tpm test fixes from Jarkko Sakkinen"
* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tpm: Use /bin/sh instead of /bin/bash
selftests: tpm: Use 'test -e' instead of 'test -f'
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
This kunit fixes update for Linux 5.8-rc4 consists of fixes to build
and run-times failures. Also includes troubleshooting tips updates
to kunit user documentation.
-----BEGIN PGP SIGNATURE-----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=XeG4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
It is common for networking tests creating its netns and making its own
setting under this new netns (e.g. changing tcp sysctl). If the test
forgot to restore to the original netns, it would affect the
result of other tests.
This patch saves the original netns at the beginning and then restores it
after every test. Since the restore "setns()" is not expensive, it does it
on all tests without tracking if a test has created a new netns or not.
The new restore_netns() could also be done in test__end_subtest() such
that each subtest will get an automatic netns reset. However,
the individual test would lose flexibility to have total control
on netns for its own subtests. In some cases, forcing a test to do
unnecessary netns re-configure for each subtest is time consuming.
e.g. In my vm, forcing netns re-configure on each subtest in sk_assign.c
increased the runtime from 1s to 8s. On top of that, test_progs.c
is also doing per-test (instead of per-subtest) cleanup for cgroup.
Thus, this patch also does per-test restore_netns(). The only existing
per-subtest cleanup is reset_affinity() and no test is depending on this.
Thus, it is removed from test__end_subtest() to give a consistent
expectation to the individual tests. test_progs.c only ensures
any affinity/netns/cgroup change made by an earlier test does not
affect the following tests.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200702004858.2103728-1-kafai@fb.com
This patch makes a few changes to the network_helpers.c
1) Enforce SO_RCVTIMEO and SO_SNDTIMEO
This patch enforces timeout to the network fds through setsockopt
SO_RCVTIMEO and SO_SNDTIMEO.
It will remove the need for SOCK_NONBLOCK that requires a more demanding
timeout logic with epoll/select, e.g. epoll_create, epoll_ctrl, and
then epoll_wait for timeout.
That removes the need for connect_wait() from the
cgroup_skb_sk_lookup.c. The needed change is made in
cgroup_skb_sk_lookup.c.
2) start_server():
Add optional addr_str and port to start_server().
That removes the need of the start_server_with_port(). The caller
can pass addr_str==NULL and/or port==0.
I have a future tcp-hdr-opt test that will pass a non-NULL addr_str
and it is in general useful for other future tests.
"int timeout_ms" is also added to control the timeout
on the "accept(listen_fd)".
3) connect_to_fd(): Fully use the server_fd.
The server sock address has already been obtained from
getsockname(server_fd). The sockaddr includes the family,
so the "int family" arg is redundant.
Since the server address is obtained from server_fd, there
is little reason not to get the server's socket type from the
server_fd also. getsockopt(server_fd) can be used to do that,
so "int type" arg is also removed.
"int timeout_ms" is added.
4) connect_fd_to_fd():
"int timeout_ms" is added.
Some code is also refactored to connect_fd_to_addr() which is
shared with connect_to_fd().
5) Preserve errno:
Some callers need to check errno, e.g. cgroup_skb_sk_lookup.c.
Make changes to do it more consistently in save_errno_close()
and log_err().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200702004852.2103003-1-kafai@fb.com
The script generates two random files that are then sent via tcp and
mptcp connections.
In order to compare throughput over consecutive runs add an option
to provide the file size on the command line: "-f 128000".
Also add an option, -t, to enable tcp tests. This is useful to
compare throughput of mptcp connections and tcp connections.
Example: run tests with a 4mb file size, 300ms delay 0.01% loss,
default gso/tso/gro settings and with large write/blocking io:
mptcp_connect.sh -t -f $((4 * 1024 * 1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The program test_progs have some very useful ability to specify a list of
test name substrings for selecting which tests to run.
This patch add the ability to list the selected test names without running
them. This is practical for seeing which tests gets selected with given
select arguments (which can also contain a exclude list via --name-blacklist).
This output can also be used by shell-scripts in a for-loop:
for N in $(./test_progs --list -t xdp); do \
./test_progs -t $N 2>&1 > result_test_${N}.log & \
done ; wait
This features can also be used for looking up a test number and returning
a testname. If the selection was empty then a shell EXIT_FAILURE is
returned. This is useful for scripting. e.g. like this:
n=1;
while [ $(./test_progs --list -n $n) ] ; do \
./test_progs -n $n ; n=$(( n+1 )); \
done
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159363985751.930467.9610992940793316982.stgit@firesoul
It can be practial to get the number of tests that test_progs contain.
This could for example be used to create a shell for-loop construct that
runs the individual tests.
Like:
for N in $(seq 1 $(./test_progs -c)); do
./test_progs -n $N 2>&1 > result_test_${N}.log &
done ; wait
V2: Add the ability to return the count for the selected tests. This is
useful for getting a count e.g. after excluding some tests with option -b.
The current beakers test script like to report the max test count upfront.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159363985244.930467.12617117873058936829.stgit@firesoul
When a user selects a non-existing test the summary is printed with
indication 0 for all info types, and shell "success" (EXIT_SUCCESS) is
indicated. This can be understood by a human end-user, but for shell
scripting is it useful to indicate a shell failure (EXIT_FAILURE).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159363984736.930467.17956007131403952343.stgit@firesoul
Turn off -Wnested-externs to avoid annoying warnings in BUILD_BUG_ON macro when
compiling bpftool:
In file included from /data/users/andriin/linux/tools/include/linux/build_bug.h:5,
from /data/users/andriin/linux/tools/include/linux/kernel.h:8,
from /data/users/andriin/linux/kernel/bpf/disasm.h:10,
from /data/users/andriin/linux/kernel/bpf/disasm.c:8:
/data/users/andriin/linux/kernel/bpf/disasm.c: In function ‘__func_get_name’:
/data/users/andriin/linux/tools/include/linux/compiler.h:37:38: warning: nested extern declaration of ‘__compiletime_assert_0’ [-Wnested-externs]
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~~~
/data/users/andriin/linux/tools/include/linux/compiler.h:16:15: note: in definition of macro ‘__compiletime_assert’
extern void prefix ## suffix(void) __compiletime_error(msg); \
^~~~~~
/data/users/andriin/linux/tools/include/linux/compiler.h:37:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~
/data/users/andriin/linux/tools/include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
/data/users/andriin/linux/tools/include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^~~~~~~~~~~~~~~~
/data/users/andriin/linux/kernel/bpf/disasm.c:20:2: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(ARRAY_SIZE(func_id_str) != __BPF_FUNC_MAX_ID);
^~~~~~~~~~~~
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200701212816.2072340-1-andriin@fb.com
The test_vmlinux test uses hrtimer_nanosleep as hook to test tracing
programs. But in a kernel built by clang, which performs more aggresive
inlining, that function gets inlined into its caller SyS_nanosleep.
Therefore, even though fentry and kprobe do hook on the function,
they aren't triggered by the call to nanosleep in the test.
A possible fix is switching to use a function that is less likely to
be inlined, such as hrtimer_range_start_ns. The EXPORT_SYMBOL functions
shouldn't be inlined based on the description of [1], therefore safe
to use for this test. Also the arguments of this function include the
duration of sleep, therefore suitable for test verification.
[1] af3b56289b time: don't inline EXPORT_SYMBOL functions
Tested:
In a clang build kernel, before this change, the test fails:
test_vmlinux:PASS:skel_open 0 nsec
test_vmlinux:PASS:skel_attach 0 nsec
test_vmlinux:PASS:tp 0 nsec
test_vmlinux:PASS:raw_tp 0 nsec
test_vmlinux:PASS:tp_btf 0 nsec
test_vmlinux:FAIL:kprobe not called
test_vmlinux:FAIL:fentry not called
After switching to hrtimer_range_start_ns, the test passes:
test_vmlinux:PASS:skel_open 0 nsec
test_vmlinux:PASS:skel_attach 0 nsec
test_vmlinux:PASS:tp 0 nsec
test_vmlinux:PASS:raw_tp 0 nsec
test_vmlinux:PASS:tp_btf 0 nsec
test_vmlinux:PASS:kprobe 0 nsec
test_vmlinux:PASS:fentry 0 nsec
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200701175315.1161242-1-haoluo@google.com
The new test is similar to other bpf_iter tests. It dumps all
/proc/<pid>/stack to a seq_file. Here is some example output:
pid: 2873 num_entries: 3
[<0>] worker_thread+0xc6/0x380
[<0>] kthread+0x135/0x150
[<0>] ret_from_fork+0x22/0x30
pid: 2874 num_entries: 9
[<0>] __bpf_get_stack+0x15e/0x250
[<0>] bpf_prog_22a400774977bb30_dump_task_stack+0x4a/0xb3c
[<0>] bpf_iter_run_prog+0x81/0x170
[<0>] __task_seq_show+0x58/0x80
[<0>] bpf_seq_read+0x1c3/0x3b0
[<0>] vfs_read+0x9e/0x170
[<0>] ksys_read+0xa7/0xe0
[<0>] do_syscall_64+0x4c/0xa0
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Note: bpf_iter test as-is doesn't print the contents of the seq_file. To
see the example above, it is necessary to add printf() to do_dummy_read.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-5-songliubraving@fb.com
Introduce helper bpf_get_task_stack(), which dumps stack trace of given
task. This is different to bpf_get_stack(), which gets stack track of
current task. One potential use case of bpf_get_task_stack() is to call
it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file.
bpf_get_task_stack() uses stack_trace_save_tsk() instead of
get_perf_callchain() for kernel stack. The benefit of this choice is that
stack_trace_save_tsk() doesn't require changes in arch/. The downside of
using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the
stack trace to unsigned long array. For 32-bit systems, we need to
translate it to u64 array.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com
Debuggers expect that doing PTRACE_GETREGS, then poking at a tracee
and maybe letting it run for a while, then doing PTRACE_SETREGS will
put the tracee back where it was. In the specific case of a 32-bit
tracer and tracee, the PTRACE_GETREGS/SETREGS data structure doesn't
have fs_base or gs_base fields, so FSBASE and GSBASE fields are
never stored anywhere. Everything used to still work because
nonzero FS or GS would result full reloads of the segment registers
when the tracee resumes, and the bases associated with FS==0 or
GS==0 are irrelevant to 32-bit code.
Adding FSGSBASE support broke this: when FSGSBASE is enabled, FSBASE
and GSBASE are now restored independently of FS and GS for all tasks
when context-switched in. This means that, if a 32-bit tracer
restores a previous state using PTRACE_SETREGS but the tracee's
pre-restore and post-restore bases don't match, then the tracee is
resumed with the wrong base.
Fix it by explicitly loading the base when a 32-bit tracer pokes FS
or GS on a 64-bit kernel.
Also add a test case.
Fixes: 673903495c ("x86/process/64: Use FSBSBASE in switch_to() if available")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/229cc6a50ecbb701abd50fe4ddaf0eda888898cd.1593192140.git.luto@kernel.org
The manual call to set_thread_area() via int $0x80 was missing any
indication that the descriptor was a pointer, causing gcc to
occasionally generate wrong code. Add the missing constraint.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/432968af67259ca92d68b774a731aff468eae610.1593192140.git.luto@kernel.org
There are several copies of get_eflags() and set_eflags() and they all are
buggy. Consolidate them and fix them. The fixes are:
Add memory clobbers. These are probably unnecessary but they make sure
that the compiler doesn't move something past one of these calls when it
shouldn't.
Respect the redzone on x86_64. There has no failure been observed related
to this, but it's definitely a bug.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/982ce58ae8dea2f1e57093ee894760e35267e751.1593191971.git.luto@kernel.org
Make bpf_endian.h compatible with vmlinux.h. It is a frequent request from
users wanting to use bpf_endian.h in their BPF applications using CO-RE and
vmlinux.h.
To achieve that, re-implement byte swap macros and drop all the header
includes. This way it can be used both with linux header includes, as well as
with a vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630152125.3631920-2-andriin@fb.com
Similarly to bpftool Makefile, allow to specify custom location of vmlinux.h
to be used during the build. This allows simpler testing setups with
checked-in pre-generated vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630004759.521530-2-andriin@fb.com
In some build contexts (e.g., Travis CI build for outdated kernel), vmlinux.h,
generated from available kernel, doesn't contain all the types necessary for
BPF program compilation. For such set up, the most maintainable way to deal
with this problem is to keep pre-generated (almost up-to-date) vmlinux.h
checked in and use it for compilation purposes. bpftool after that can deal
with kernel missing some of the features in runtime with no problems.
To that effect, allow to specify path to custom vmlinux.h to bpftool's
Makefile with VMLINUX_H variable.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630004759.521530-1-andriin@fb.com
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.
For example, for this test
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
Before the previous verifier change, we have xlated codes:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
1: (b4) w0 = 0
2: (95) exit
After the previous verifier change, we have:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; if (arg == 0)
1: (55) if r1 != 0x0 goto pc+4
; test7_result = 1;
2: (18) r1 = map[id:6][0]+48
4: (b7) r2 = 1
5: (7b) *(u64 *)(r1 +0) = r2
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
6: (b4) w0 = 0
7: (95) exit
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
Calling bpf_prog_detach is incorrect, since it takes target_fd as
its argument. The intention here is to pass it as attach_bpf_fd,
so use bpf_prog_detach2 and pass zero for target_fd.
Fixes: 06716e04a0 ("selftests/bpf: Extend test_flow_dissector to cover link creation")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-7-lmb@cloudflare.com
Pass 0 as target_fd when attaching and detaching flow dissector.
Additionally, pass the expected program when detaching.
Fixes: 1f043f87bb ("selftests/bpf: Add tests for attaching bpf_link to netns")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-6-lmb@cloudflare.com
This case, while not particularly useful, is worth covering because we
expect the operation to succeed as opposed when re-attaching the same
program directly with PROG_ATTACH.
While at it, update the tests summary that fell out of sync when tests
extended to cover links.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-5-jakub@cloudflare.com
Add tests to check ethtool report about extended state.
The tests configure several states and verify that the correct extended
state is reported by ethtool.
Check extended state with substate (Autoneg) and extended state without
substate (No cable).
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add NETIF_NO_CABLE port to tests topology.
The port can also be declared as an environment variable and tests can be
run like that:
NETIF_NO_CABLE=eth9 ./test.sh eth{1..8}
The NETIF_NO_CABLE port will be used by ethtool_extended_state test.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently different_speeds_get() is used only by ethtool.sh tests.
The function can be useful for another tests that check ethtool
configurations.
Move the function to ethtool_lib in order to allow other tests to use
it.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is inspired by the mlxsw RED selftest. It is much simpler to set
up (also because there is no point in testing PRIO / RED encapsulation). It
tests bare RED, ECN and ECN+nodrop modes of operation. On top of that it
tests RED early_drop and mark qevents.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reverted commit illegitly uses tpm2-tools. External dependencies are
absolutely forbidden from these tests. There is also the problem that
clearing is not necessarily wanted behavior if the test/target computer is
not used only solely for testing.
Fixes: a9920d3bad ("tpm: selftest: cleanup after unseal with wrong auth/policy test")
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
herdtools7 7.56 is going to be released in the week of 22 Jun 2020.
This commit therefore adds the exact version in the compatibility table.
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
klitmus7 is independent of the memory model but depends on the
build-target kernel release.
It occasionally lost compatibility due to kernel API changes [1, 2, 3].
It was remedied in a backwards-compatible manner respectively [4, 5, 6].
Reflect this fact in README.
[1]: b899a85043 ("compiler.h: Remove ACCESS_ONCE()")
[2]: 0bb95f80a3 ("Makefile: Globally enable VLA warning")
[3]: d56c0d45f0 ("proc: decouple proc from VFS with "struct proc_ops"")
[4]: https://github.com/herd/herdtools7/commit/e87d7f9287d1
("klitmus: Use WRITE_ONCE and READ_ONCE in place of deprecated ACCESS_ONCE")
[5]: https://github.com/herd/herdtools7/commit/a0cbb10d02be
("klitmus: Avoid variable length array")
[6]: https://github.com/herd/herdtools7/commit/46b9412d3a58
("klitmus: Linux kernel v5.6.x compat")
NOTE: [5] was ahead of herdtools7 7.53, which did not make an
official release. Code generated by klitmus7 without [5] can still be
built targeting Linux 4.20--5.5 if you don't care VLA warnings.
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The name of litmus test doesn't match the one described below.
Fix the name of litmus test.
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
According to Luc, atomic_add_unless() is directly provided by herd7,
therefore it can be used in litmus tests. So change the limitation
section in README to unlimit the use of atomic_add_unless().
Cc: Luc Maranget <luc.maranget@inria.fr>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The definition of "conflict" should not include the type of access nor
whether the accesses are concurrent or not, which this patch addresses.
The definition of "data race" remains unchanged.
The definition of "conflict" as we know it and is cited by various
papers on memory consistency models appeared in [1]: "Two accesses to
the same variable conflict if at least one is a write; two operations
conflict if they execute conflicting accesses."
The LKMM as well as the C11 memory model are adaptations of
data-race-free, which are based on the work in [2]. Necessarily, we need
both conflicting data operations (plain) and synchronization operations
(marked). For example, C11's definition is based on [3], which defines a
"data race" as: "Two memory operations conflict if they access the same
memory location, and at least one of them is a store, atomic store, or
atomic read-modify-write operation. In a sequentially consistent
execution, two memory operations from different threads form a type 1
data race if they conflict, at least one of them is a data operation,
and they are adjacent in <T (i.e., they may be executed concurrently)."
[1] D. Shasha, M. Snir, "Efficient and Correct Execution of Parallel
Programs that Share Memory", 1988.
URL: http://snir.cs.illinois.edu/listed/J21.pdf
[2] S. Adve, "Designing Memory Consistency Models for Shared-Memory
Multiprocessors", 1993.
URL: http://sadve.cs.illinois.edu/Publications/thesis.pdf
[3] H.-J. Boehm, S. Adve, "Foundations of the C++ Concurrency Memory
Model", 2008.
URL: https://www.hpl.hp.com/techreports/2008/HPL-2008-56.pdf
Signed-off-by: Marco Elver <elver@google.com>
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit updates the list of LKMM-related publications in
Documentation/references.txt.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
In the dim distant past, qemu commands needed to be run from the
rcutorture directory, but this is no longer the case. This commit
therefore removes the now-useless "cd $KVM" from the kvm-test-1-run.sh
script.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the qemu command is constructed twice, once to dump it
to the qemu-cmd file and again to execute it. This is of course an
accident waiting to happen, but is done to ensure that the remainder
of the script has an accurate idea of the running qemu command's PID.
This commit therefore places both the qemu command and the PID capture
into a new temporary file and sources that temporary file. Thus the
single construction of the qemu command into the qemu-cmd file suffices
for both purposes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a script that transforms qemu-cmd files to allow them
and the corresponding kernels to be run in contexts other than the one
that they were created for, including on systems other than the one that
they were built on. For example, this allows the build products from a
--buildonly run to be transformed to allow distributed rcutorture testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Using --kcsan when the compiler does not support KCSAN results in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Clean KCSAN run in /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2020.06.16-09.53.16
This is a bit obtuse, so this commit adds checks resulting in this:
:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Compiler or architecture does not support KCSAN!
Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Currently, kvm-recheck.sh complains that qemu failed for --buildonly
runs, which is sort of true given that qemu can hardly succeed if not
invoked in the first place. Nevertheless, this commit swaps the order
of checks in kvm-recheck.sh so that --buildonly runs will be summarized
more straightforwardly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We need to pass the arguments provided to --kmake-arg to all make
invocations. In particular, the make invocations generating the configs
need to see the final make arguments, e.g. if config variables depend on
particular variables that are passed to make.
For example, when using '--kcsan --kmake-arg CC=clang-11', we would lose
CONFIG_KCSAN=y due to 'make oldconfig' not seeing that we want to use a
compiler that supports KCSAN.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit pulls the simple pattern-based error detection from the
console log into a new console-badness.sh file. This will enable future
commits to end a run on the first error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When bisecting RCU issues, it is often the case that the first error in
an unsuccessful run will happen quickly, but that a successful run must
go on for some time in order to obtain a sufficiently low false-negative
error rate. In many cases, a bisection requires multiple concurrent
runs, in which case the first failure in any run indicates failure,
pure and simple. In such cases, it would speed things up greatly if
the first failure terminated all runs.
This commit therefore adds scripting that checks for a file named "STOP"
in the top-level results directory, terminating the run when it appears.
Note that in-progress builds will continue until completion, but future
builds and all runs will be cut short.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
One reason to do a --buildonly run is to use the build products elsewhere,
for example, to do the actual test on some other system. Part of doing
the test is the actual qemu command, which is not currently produced
by --buildonly runs. This commit therefore causes --buildonly runs to
create this file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Leaving off the kvm.sh script's --cpus argument results in the script
testing the scenarios sequentially, which can be quite slow. However,
having to specify the actual number of CPUs can be error-prone.
This commit therefore adds a --allcpus argument that causes kvm.sh to
use all available CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The identify_qemu_vcpus bash function can return numbers including
whitespace characters, which can be a bit annoying in some bash
dollar-sign substitutions. This commit therefore strips all spaces and
tabs from the value that identify_qemu_vcpus outputs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current console parsing assumes that console lines containing "!!!"
are statistics lines from which it can parse the number of rcutorture
too-short grace-period failures. This prints confusing output for
other problems, including memory exhaustion. This commit therefore
differentiates between these cases and prints an appropriate error string.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture-test recheck logic fails to set the configfile variable to
the current scenario, so this commit properly initializes this variable.
This change isn't critical given that all errors for a given scenario
follow that scenario's heading, but it is easier on the eyes to repeat it.
And this repetition also prevents confusion as to whether a given message
goes with the previous heading or the next one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-check-branches.sh script that takes a list
of commits and commit ranges and runs a short rcutorture test on all
scenarios on each specified commit. A summary is printed at the end, and
the script returns success if all rcutorture runs completed without error.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On some (probably misconfigured) systems, the torture-test scripting
will cause qemu to complain about missing EFI firmware, often because
qemu is trying to traverse broken symbolic links to find that firmware.
Which is a bit silly given that the default torture-test guest OS has
but a single binary for its userspace, and thus is unlikely to do much
in the way of networking in any case.
This commit therefore avoids such problems by specifying "-net none"
to qemu unless the TORTURE_QEMU_INTERACTIVE environment variable is set
(for example, by having specified "--interactive" to kvm.sh), in which
case "-net nic -net user" is specified to qemu instead. Either choice
may be overridden by specifying the "-net" argument of your choice to
the kvm.sh "--qemu-args" parameter.
Link: https://lore.kernel.org/lkml/20190701141403.GA246562@google.com
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
This commit renames the rcutorture config/refperf to config/refscale to
further avoid conflation with the Linux kernel's perf feature.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of refperf with the kernel's perf
feature by renaming kernel/rcu/refperf.c to kernel/rcu/refscale.c,
and also by similarly renaming the functions and variables inside
this file. This has the side effect of changing the names of the
kernel boot parameters, so kernel-parameters.txt and ver_functions.sh
are also updated.
The rcutorture --torture type remains refperf, and this will be
addressed in a separate commit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The old Kconfig option name is all too easy to conflate with the
unrelated "perf" feature, so this commit renames RCU_REF_PERF_TEST to
RCU_REF_SCALE_TEST.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, it is necessary to manually edit the console output to see
anything more than statistics, and sometimes the statistics can indicate
outliers that need more investigation. This commit therefore dumps out
the per-experiment measurements, sorted in ascending order, just before
dumping out the statistics.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The experiment-number column is currently labeled "Threads", which is
misleading at best. This commit therefore relabels it as "Runs", and
adjusts the scripts accordingly.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit updates the rcutorture scripting to include the new refperf
torture-test module.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
I'd like arch-specific tests to XFAIL when on a mismatched architecture
so that we can more easily compare test coverage across all systems.
Lacking kernel configs or CPU features count as a FAIL, not an XFAIL.
Additionally fixes a build failure under 32-bit UML.
Fixes: b09511c253 ("lkdtm: Add a DOUBLE_FAULT crash type on x86")
Fixes: cea23efb4d ("lkdtm/bugs: Make double-fault test always available")
Fixes: 6cb6982f42 ("lkdtm: arm64: test kernel pointer authentication")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we expect to see warnings every time for many tests, just reset
the WARN_ONCE flags each time the script runs.
Fixes: 46d1a0f03d ("selftests/lkdtm: Add tests for LKDTM targets")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a selftest for the usage of FPU code in kernel mode.
Currently only implemented for x86. In the future, kernel FPU testing
could be unified between the different architectures supporting it.
[ bp:
- Split out from a conglomerate patch, put comments over statements.
- run the test only on debugfs write.
- Add bare-minimum run_test_fpu.sh, run 1000 iterations on all CPUs
by default.
- Add conditionally -msse2 so that clang doesn't generate library
calls.
- Use cc-option to detect gcc 7.1 not supporting -mpreferred-stack-boundary=3 (amluto).
- Document stuff so that we don't forget.
- Fix:
ld: lib/test_fpu.o: in function `test_fpu_get':
>> test_fpu.c:(.text+0x16e): undefined reference to `__sanitizer_cov_trace_cmpd'
>> ld: test_fpu.c:(.text+0x1a7): undefined reference to `__sanitizer_cov_trace_cmpd'
ld: test_fpu.c:(.text+0x1e0): undefined reference to `__sanitizer_cov_trace_cmpd'
]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200624114646.28953-3-bp@alien8.de
Address KCOV vs noinstr. There is no function attribute to selectively
suppress KCOV instrumentation, instead teach objtool to NOP out the
calls in noinstr functions.
This cures a bunch of KCOV crashes (as used by syzcaller).
-----BEGIN PGP SIGNATURE-----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=0Wd6
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
Validate that BPF object with broken (in multiple ways) BPF program can still
be successfully loaded, if that broken BPF program is disabled.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200625232629.3444003-3-andriin@fb.com
Currently, bpf_object__load() (and by induction skeleton's load), will always
attempt to prepare, relocate, and load into kernel every single BPF program
found inside the BPF object file. This is often convenient and the right thing
to do and what users expect.
But there are plenty of cases (especially with BPF development constantly
picking up the pace), where BPF application is intended to work with old
kernels, with potentially reduced set of features. But on kernels supporting
extra features, it would like to take a full advantage of them, by employing
extra BPF program. This could be a choice of using fentry/fexit over
kprobe/kretprobe, if kernel is recent enough and is built with BTF. Or BPF
program might be providing optimized bpf_iter-based solution that user-space
might want to use, whenever available. And so on.
With libbpf and BPF CO-RE in particular, it's advantageous to not have to
maintain two separate BPF object files to achieve this. So to enable such use
cases, this patch adds ability to request not auto-loading chosen BPF
programs. In such case, libbpf won't attempt to perform relocations (which
might fail due to old kernel), won't try to resolve BTF types for
BTF-aware (tp_btf/fentry/fexit/etc) program types, because BTF might not be
present, and so on. Skeleton will also automatically skip auto-attachment step
for such not loaded BPF programs.
Overall, this feature allows to simplify development and deployment of
real-world BPF applications with complicated compatibility requirements.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200625232629.3444003-2-andriin@fb.com
These patches address a number of instrumentation issues that were found after
the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these
patches make UBSAN/KASAN/KCSAN happy again.
Part of making this all work is bumping the minimum GCC version for KASAN
builds to gcc-8.3, the reason for this is that the __no_sanitize_address
function attribute is broken in GCC releases before that.
No known GCC version has a working __no_sanitize_undefined, however because the
only noinstr violation that results from this happens when an UB is found, we
treat it like WARN. That is, we allow it to violate the noinstr rules in order
to get the warning out.
-----BEGIN PGP SIGNATURE-----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=fcu1
-----END PGP SIGNATURE-----
Merge tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
Two minor build fixes.
Thanks to:
Aneesh Kumar K.V, Arseny Solokha, Harish.
-----BEGIN PGP SIGNATURE-----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=TvGN
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y.
- Two minor build fixes.
Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish.
* tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure in ebb tests
powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL
powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl71tgEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB5sB/48VLEeDtkRtHVQntLG9SFogwDkHjkRW/lo
kgO5APEcdhZZq3mBY2fIww5iX5Et7vRpx8ovempmqZGhO9B4ZMSNG0DFxoYdtXTU
jgox+LzkW+hYldK1Bv03ioLZgIz6Lc8zyK6kRB7NuDN88VEVds0ksYmcAojeIN9b
vmpquEAoVppm0VPjt6VA0xQ6HtiKfvlV7PW6Pqs0dKovnNY982jRXBMzaGBbDFQ7
3eKmW4PBru/Ew16J172vf/0sBJQBiZrSdXCqv/USKvPHkUDkJiYsaWLpsWx4m4to
bE/OS6aWx94NcgxPUca3y2G2OhPU+VFiXjuJ0kvzt4EJIuW/CGUf
=2kBR
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
While the man page usbipd.8 already informs the user on which
kernel module has to be used on server side, the man page usbip.8
does not provide any equivalent information on client side.
Also, it could be hard for a newbie to identify the proper usbip
client kernel module, due to the name "vhci-hcd" that has no
immediate assonance with usbip.
Add in usbip.8 the command to add the module vhci-hcd, similarly
as it's already present in usbipd.8 for usbip-host.
While there, rephrase the description of the command "usbip list
--remote=server".
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
--
v1->v2: rephrase the description of command "usbip list ..."
fix a typo in commit message
Link: https://lore.kernel.org/r/2da8fc9e34440c1fa5f9007baaa3921767cdec50.1593090874.git.borneo.antonio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When separating out different phases of running tests[1]
(build/exec/parse/etc), the format of the KunitResult tuple changed
(adding an elapsed_time variable). This is not populated during a build
failure, causing kunit.py to crash.
This fixes [1] to probably populate the result variable, causing a
failing build to be reported properly.
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=45ba7a893ad89114e773b3dc32f6431354c465d6
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, if the kernel is configured incorrectly or if it crashes before any
kunit tests are run, kunit finishes without error, reporting
that 0 test cases were run.
To fix this, an error is shown when the tap header is not found, which
indicates that kunit was not able to run at all.
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is
updated") introduced a new CONFIG option CONFIG_CC_VERSION_TEXT. On my
system, this is set to "gcc (GCC) 10.1.0" which breaks KUnit config
parsing which did not like the spaces in the string.
Fix this by updating the regex to allow strings containing spaces.
Fixes: 8b59cd81dc ("kbuild: ensure full rebuild when the compiler is updated")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Changeset 1eecbcdca2 ("docs: move protection-keys.rst to the core-api book")
from Jun 7, 2019 converted protection-keys.txt file to ReST.
A recent change at protection_keys.c partially reverted such
changeset, causing it to point to a non-existing file:
- * Tests x86 Memory Protection Keys (see Documentation/core-api/protection-keys.rst)
+ * Tests Memory Protection Keys (see Documentation/vm/protection-keys.txt)
It sounds to me that the changeset that introduced such change
4645e3563673 ("selftests/vm/pkeys: rename all references to pkru to a generic name")
could also have other side effects, as it sounds that it was not
generated against uptream code, but, instead, against a version
older than Jun 7, 2019.
Fixes: 4645e3563673 ("selftests/vm/pkeys: rename all references to pkru to a generic name")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/cf65aa052669f55b9dc976a5c8026aef5840741d.1592895969.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.
2) The default crypto algorithm selection in Kconfig for IPSEC is out
of touch with modern reality, fix this up. From Eric Biggers.
3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
Nakryiko.
4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
Hangbin Liu.
5) Adjust packet alignment handling in ax88179_178a driver to match
what the hardware actually does. From Jeremy Kerr.
6) register_netdevice can leak in the case one of the notifiers fail,
from Yang Yingliang.
7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.
8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
Oltean.
9) tg3 driver can sleep forever when we get enough EEH errors, fix from
David Christensen.
10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
drivers, from Ciara Loftus.
11) Fix scanning loop break condition in of_mdiobus_register(), from
Florian Fainelli.
12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.
13) Endianness fix in mlxsw, from Ido Schimmel.
14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.
15) Missing bridge mrp configuration validation, from Horatiu Vultur.
16) Fix circular netns references in wireguard, from Jason A. Donenfeld.
17) PTP initialization on recovery is not done properly in qed driver,
from Alexander Lobakin.
18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
from Rahul Lakkireddy.
19) Don't clear bound device TX queue of socket prematurely otherwise we
get problems with ktls hw offloading, from Tariq Toukan.
20) ipset can do atomics on unaligned memory, fix from Russell King.
21) Align ethernet addresses properly in bridging code, from Thomas
Martitz.
22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
rds: transport module should be auto loaded when transport is set
sch_cake: fix a few style nits
sch_cake: don't call diffserv parsing code when it is not needed
sch_cake: don't try to reallocate or unshare skb unconditionally
ethtool: fix error handling in linkstate_prepare_data()
wil6210: account for napi_gro_receive never returning GRO_DROP
hns: do not cast return value of napi_gro_receive to null
socionext: account for napi_gro_receive never returning GRO_DROP
wireguard: receive: account for napi_gro_receive never returning GRO_DROP
vxlan: fix last fdb index during dump of fdb with nhid
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tc-testing: avoid action cookies with odd length.
bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
net: dsa: sja1105: fix tc-gate schedule with single element
net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
net: dsa: sja1105: unconditionally free old gating config
net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
net: macb: free resources on failure path of at91ether_open()
net: macb: call pm_runtime_put_sync on failure path
...
Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.
Repeating the commit description here for completeness:
Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:
o The first 8 RTT samples in a round trip are 150ms, resulting in a
curr_rtt of 150ms and a delay_min of 150ms.
o The 9th RTT sample is 100ms. The curr_rtt does not change after the
first 8 samples, so curr_rtt remains 150ms. But delay_min can be
lowered at any time, so delay_min falls to 100ms. The code executes
the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
of 100ms, and the curr_rtt is declared far enough above delay_min to
force a (spurious) exit of Slow start.
The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.
Fixes: 6de4a9c430 ("bpf: tcp: Add bpf_cubic example")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adjust the SEC("xdp_devmap/") prog type prefix to contain a
slash "/" for expected attach type BPF_XDP_DEVMAP. This is consistent
with other prog types like tracing.
Fixes: 2778797037 ("libbpf: Add SEC name for xdp programs attached to device map")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159309521882.821855.6873145686353617509.stgit@firesoul
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net, they are:
1) Unaligned atomic access in ipset, from Russell King.
2) Missing module description, from Rob Gill.
3) Patches to fix a module unload causing NULL pointer dereference in
xtables, from David Wilder. For the record, I posting here his cover
letter explaining the problem:
A crash happened on ppc64le when running ltp network tests triggered by
"rmmod iptable_mangle".
See previous discussion in this thread:
https://lists.openwall.net/netdev/2020/06/03/161 .
In the crash I found in iptable_mangle_hook() that
state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
called when ip_mangle modules is unloaded. A rmmod task was found running
in the crash dump. A 2nd crash showed the same problem when running
"rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).
To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
un-register the underlying hook and exit would do the table freeing. The
netns core does an unconditional +synchronize_rcu after the pre_exit hooks
insuring no packets are in flight that have picked up the pointer before
completing the un-register.
These patches include changes for both iptables and ip6tables.
We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
loop for 72 hours.
4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define attach_type_name in common.c instead of main.h so it is only
defined once. This leads to a slight decrease in the binary size of
bpftool.
Before:
text data bss dec hex filename
399024 11168 1573160 1983352 1e4378 bpftool
After:
text data bss dec hex filename
398256 10880 1573160 1982296 1e3f58 bpftool
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200624143154.13145-1-tklauser@distanz.ch
Define prog_type_name in prog.c instead of main.h so it is only defined
once. This leads to a slight decrease in the binary size of bpftool.
Before:
text data bss dec hex filename
401032 11936 1573160 1986128 1e4e50 bpftool
After:
text data bss dec hex filename
399024 11168 1573160 1983352 1e4378 bpftool
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200624143124.12914-1-tklauser@distanz.ch
These newly added macros will be used in subsequent bpf iterator
tcp{4,6} and udp{4,6} programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230819.3989050-1-yhs@fb.com
Refactor bpf_iter_ipv6_route.c and bpf_iter_netlink.c
so net macros, originally from various include/linux header
files, are moved to a new header file
bpf_tracing_net.h. The goal is to improve reuse so
networking tracing programs do not need to
copy these macros every time they use them.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230817.3988962-1-yhs@fb.com
Commit b9f4c01f3e ("selftest/bpf: Make bpf_iter selftest
compilable against old vmlinux.h") and Commit dda18a5c0b
("selftests/bpf: Convert bpf_iter_test_kern{3, 4}.c to define
own bpf_iter_meta") redefined newly introduced types
in bpf programs so the bpf program can still compile
properly with old kernels although loading may fail.
Since this patch set introduced new types and the same
workaround is needed, so let us move the workaround
to a separate header file so they do not clutter
bpf programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230816.3988656-1-yhs@fb.com
The helper is used in tracing programs to cast a socket
pointer to a udp6_sock pointer.
The return value could be NULL if the casting is illegal.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200623230815.3988481-1-yhs@fb.com
Three more helpers are added to cast a sock_common pointer to
an tcp_sock, tcp_timewait_sock or a tcp_request_sock for
tracing programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230811.3988277-1-yhs@fb.com
The helper is used in tracing programs to cast a socket
pointer to a tcp6_sock pointer.
The return value could be NULL if the casting is illegal.
A new helper return type RET_PTR_TO_BTF_ID_OR_NULL is added
so the verifier is able to deduce proper return types for the helper.
Different from the previous BTF_ID based helpers,
the bpf_skc_to_tcp6_sock() argument can be several possible
btf_ids. More specifically, all possible socket data structures
with sock_common appearing in the first in the memory layout.
This patch only added socket types related to tcp and udp.
All possible argument btf_id and return value btf_id
for helper bpf_skc_to_tcp6_sock() are pre-calculcated and
cached. In the future, it is even possible to precompute
these btf_id's at kernel build time.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230809.3988195-1-yhs@fb.com
check that 'nft ... ct helper set <foo>' works:
1. configure ftp helper via nft and assign it to
connections on port 2121
2. check with 'conntrack -L' that the next connection
has the ftp helper attached to it.
Also add a test for auto-assign (old behaviour).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes all over the place.
This includes a couple of tests that I would normally defer,
but since they have already been helpful in catching some bugs,
don't build for any users at all, and having them
upstream makes life easier for everyone, I think it's
ok even at this late stage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7w3hcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpJ6UH/jVFVzILp3M5eVCewNsS2/j5HvRHxKb4DTwh
eoNTYMSLMy5UnwOdNZ3RjmNHxc8hS04fQsHZpI6mAIPSLWdswjmRwQPN03/fvP9M
nVdy3SxyU2ZzHbX/hRi3eTwhOkOY4RcyvkOjw49LLokIX6/DzsAO5ql3NAZW9vbL
LqZQKzAb7BeltH5RWbPPdF2UCZKia/x9QYHIXh0gJZj5YaAzlvJywNDQcxuiIODb
ZmHZZBaqZ66n99hWnSKfHtqX/fqRDqrdyameIVaSwgewho2AMj9V1FvvVMJWm669
PjQuHDf03TBBDNP9UwJRjdko7qA6aqX5Tef9aGMyBy2LJUD12A8=
=Z/dQ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place.
This includes a couple of tests that I would normally defer, but since
they have already been helpful in catching some bugs, don't build for
any users at all, and having them upstream makes life easier for
everyone, I think it's ok even at this late stage"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Use tools/include/list.h instead of stubs
tools/virtio: Reset index in virtio_test --reset.
tools/virtio: Extract virtqueue initialization in vq_reset
tools/virtio: Use __vring_new_virtqueue in virtio_test.c
tools/virtio: Add --reset
tools/virtio: Add --batch=random option
tools/virtio: Add --batch option
virtio-mem: add memory via add_memory_driver_managed()
virtio-mem: silence a static checker warning
vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()
vdpa: fix typos in the comments for __vdpa_alloc_device()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXvNBJgAKCRCRxhvAZXjc
oulGAPoCPfCguA8TPcy4tq4byGPoThyO4XnWR6XcUDOEzhbzzAEA+s5S7iRV8W92
p2gzbI4Kncq4dQNEtUvfPHQZDAEwTA0=
=eZDz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"This fixes a regression introduced with 303cc571d1 ("nsproxy: attach
to namespaces via pidfds").
The LTP testsuite reported a regression where users would now see
EBADF returned instead of EINVAL when an fd was passed that referred
to an open file but the file was not a namespace file.
Fix this by continuing to report EINVAL and add a regression test"
* tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test for setns() EINVAL regression
nsproxy: restore EINVAL for non-namespace file descriptor
This patch adds support of SO_KEEPALIVE flag and TCP related options
to bpf_setsockopt() routine. This is helpful if we want to enable or tune
TCP keepalive for applications which don't do it in the userspace code.
v3:
- update kernel-doc in uapi (Nikita Vetoshkin <nekto0n@yandex-team.ru>)
v4:
- update kernel-doc in tools too (Alexei Starovoitov)
- add test to selftests (Alexei Starovoitov)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200620153052.9439-3-zeil@yandex-team.ru
./test_progs-no_alu32 -t get_stack_raw_tp
fails due to:
52: (85) call bpf_get_stack#67
53: (bf) r8 = r0
54: (bf) r1 = r8
55: (67) r1 <<= 32
56: (c7) r1 s>>= 32
; if (usize < 0)
57: (c5) if r1 s< 0x0 goto pc+26
R0=inv(id=0,smax_value=800) R1_w=inv(id=0,umax_value=800,var_off=(0x0; 0x3ff)) R6=ctx(id=0,off=0,imm=0) R7=map_value(id=0,off=0,ks=4,vs=1600,imm=0) R8_w=inv(id=0,smax_value=800) R9=inv800
; ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
58: (1f) r9 -= r8
; ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
59: (bf) r2 = r7
60: (0f) r2 += r1
regs=1 stack=0 before 52: (85) call bpf_get_stack#67
; ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
61: (bf) r1 = r6
62: (bf) r3 = r9
63: (b7) r4 = 0
64: (85) call bpf_get_stack#67
R0=inv(id=0,smax_value=800) R1_w=ctx(id=0,off=0,imm=0) R2_w=map_value(id=0,off=0,ks=4,vs=1600,umax_value=800,var_off=(0x0; 0x3ff),s32_max_value=1023,u32_max_value=1023) R3_w=inv(id=0,umax_value=9223372036854776608)
R3 unbounded memory access, use 'var &= const' or 'if (var < const)'
In the C code:
usize = bpf_get_stack(ctx, raw_data, max_len, BPF_F_USER_STACK);
if (usize < 0)
return 0;
ksize = bpf_get_stack(ctx, raw_data + usize, max_len - usize, 0);
if (ksize < 0)
return 0;
We used to have problem with pointer arith in R2.
Now it's a problem with two integers in R3.
'if (usize < 0)' is comparing R1 and makes it [0,800], but R8 stays [-inf,800].
Both registers represent the same 'usize' variable.
Then R9 -= R8 is doing 800 - [-inf, 800]
so the result of "max_len - usize" looks unbounded to the verifier while
it's obvious in C code that "max_len - usize" should be [0, 800].
To workaround the problem convert ksize and usize variables from int to long.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prevent loading/parsing vmlinux BTF twice in some cases: for CO-RE relocations
and for BTF-aware hooks (tp_btf, fentry/fexit, etc).
Fixes: a6ed02cac6 ("libbpf: Load btf_vmlinux only once per object.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200624043805.1794620-1-andriin@fb.com
Building bpftool yields the following complaint:
pids.c: In function 'emit_obj_refs_json':
pids.c:175:80: warning: declaration of 'json_wtr' shadows a global declaration [-Wshadow]
175 | void emit_obj_refs_json(struct obj_refs_table *table, __u32 id, json_writer_t *json_wtr)
| ~~~~~~~~~~~~~~~^~~~~~~~
In file included from pids.c:11:
main.h:141:23: note: shadowed declaration is here
141 | extern json_writer_t *json_wtr;
| ^~~~~~~~
Let's rename the variable.
v2:
- Rename the variable instead of calling the global json_wtr directly.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623213600.16643-1-quentin@isovalent.com
The arm64 signal tests generate warnings during build since both they and
the toplevel lib.mk define a clean target:
Makefile:25: warning: overriding recipe for target 'clean'
../../lib.mk:126: warning: ignoring old recipe for target 'clean'
Since the inclusion of lib.mk is in the signal Makefile there is no
situation where this warning could be avoided so just remove the redundant
clean target.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200624104933.21125-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 64e62426f4 ("staging: usbip: edit Kconfig and rename
CONFIG options") renamed the module usbip as usbip-host, but the
example in the man page still reports the old module name.
Fix the module name in usbipd.8
Fixes: 64e62426f4 ("staging: usbip: edit Kconfig and rename CONFIG options")
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Acked-by: matt mooney <mfm@muteddisk.com>
Link: https://lore.kernel.org/r/20200618000818.1048203-1-borneo.antonio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With GCC 10, building usbip triggers error for multiple definition
of 'udev_context', in:
- libsrc/vhci_driver.c:18 and
- libsrc/usbip_host_common.c:27.
Declare as extern the definition in libsrc/usbip_host_common.c.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200618000844.1048309-1-borneo.antonio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Run rxtimestamp as part of TEST_PROGS. Analogous to other tests, add
new rxtimestamp.sh wrapper script, so that the test runs isolated
from background traffic in a private network namespace.
Also ignore failures of test case #6 by default. This case verifies
that a receive timestamp is not reported if timestamp reporting is
enabled for a socket, but generation is disabled. Receive timestamp
generation has to be enabled globally, as no associated socket is
known yet. A background process that enables rx timestamp generation
therefore causes a false positive. Ntpd is one example that does.
Add a "--strict" option to cause failure in the event that any test
case fails, including test #6. This is useful for environments that
are known to not have such background processes.
Tested:
make -C tools/testing/selftests TARGETS="net" run_tests
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When producing the bpf-helpers.7 man page from the documentation from
the BPF user space header file, rst2man complains:
<stdin>:2636: (ERROR/3) Unexpected indentation.
<stdin>:2640: (WARNING/2) Block quote ends without a blank line; unexpected unindent.
Let's fix formatting for the relevant chunk (item list in
bpf_ringbuf_query()'s description), and for a couple other functions.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623153935.6215-1-quentin@isovalent.com
bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't
return .text "BPF program", if it is a function storage for sub-programs.
Because of that, any CO-RE relocation in helper non-inlined functions will
fail. Fix this by searching for .text-corresponding BPF program manually.
Adjust one of bpf_iter selftest to exhibit this pattern.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com
Currently, if the clang-bpf-co-re feature is not available, the build
fails with e.g.
CC prog.o
prog.c:1462:10: fatal error: profiler.skel.h: No such file or directory
1462 | #include "profiler.skel.h"
| ^~~~~~~~~~~~~~~~~
This is due to the fact that the BPFTOOL_WITHOUT_SKELETONS macro is not
defined, despite BUILD_BPF_SKELS not being set. Fix this by correctly
evaluating $(BUILD_BPF_SKELS) when deciding on whether to add
-DBPFTOOL_WITHOUT_SKELETONS to CFLAGS.
Fixes: 05aca6da3b ("tools/bpftool: Generalize BPF skeleton support and generate vmlinux.h")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623103710.10370-1-tklauser@distanz.ch
Extend original variable-length tests with a case to catch a common
existing pattern of testing for < 0 for errors. Note because
verifier also tracks upper bounds and we know it can not be greater
than MAX_LEN here we can skip upper bound check.
In ALU64 enabled compilation converting from long->int return types
in probe helpers results in extra instruction pattern, <<= 32, s >>= 32.
The trade-off is the non-ALU64 case works. If you really care about
every extra insn (XDP case?) then you probably should be using original
int type.
In addition adding a sext insn to bpf might help the verifier in the
general case to avoid these types of tricks.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-3-andriin@fb.com
Add selftest that validates variable-length data reading and concatentation
with one big shared data array. This is a common pattern in production use for
monitoring and tracing applications, that potentially can read a lot of data,
but overall read much less. Such pattern allows to determine precisely what
amount of data needs to be sent over perfbuf/ringbuf and maximize efficiency.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-2-andriin@fb.com
Switch most of BPF helper definitions from returning int to long. These
definitions are coming from comments in BPF UAPI header and are used to
generate bpf_helper_defs.h (under libbpf) to be later included and used from
BPF programs.
In actual in-kernel implementation, all the helpers are defined as returning
u64, but due to some historical reasons, most of them are actually defined as
returning int in UAPI (usually, to return 0 on success, and negative value on
error).
This actually causes Clang to quite often generate sub-optimal code, because
compiler believes that return value is 32-bit, and in a lot of cases has to be
up-converted (usually with a pair of 32-bit bit shifts) to 64-bit values,
before they can be used further in BPF code.
Besides just "polluting" the code, these 32-bit shifts quite often cause
problems for cases in which return value matters. This is especially the case
for the family of bpf_probe_read_str() functions. There are few other similar
helpers (e.g., bpf_read_branch_records()), in which return value is used by
BPF program logic to record variable-length data and process it. For such
cases, BPF program logic carefully manages offsets within some array or map to
read variable-length data. For such uses, it's crucial for BPF verifier to
track possible range of register values to prove that all the accesses happen
within given memory bounds. Those extraneous zero-extending bit shifts,
inserted by Clang (and quite often interleaved with other code, which makes
the issues even more challenging and sometimes requires employing extra
per-variable compiler barriers), throws off verifier logic and makes it mark
registers as having unknown variable offset. We'll study this pattern a bit
later below.
Another common pattern is to check return of BPF helper for non-zero state to
detect error conditions and attempt alternative actions in such case. Even in
this simple and straightforward case, this 32-bit vs BPF's native 64-bit mode
quite often leads to sub-optimal and unnecessary extra code. We'll look at
this pattern as well.
Clang's BPF target supports two modes of code generation: ALU32, in which it
is capable of using lower 32-bit parts of registers, and no-ALU32, in which
only full 64-bit registers are being used. ALU32 mode somewhat mitigates the
above described problems, but not in all cases.
This patch switches all the cases in which BPF helpers return 0 or negative
error from returning int to returning long. It is shown below that such change
in definition leads to equivalent or better code. No-ALU32 mode benefits more,
but ALU32 mode doesn't degrade or still gets improved code generation.
Another class of cases switched from int to long are bpf_probe_read_str()-like
helpers, which encode successful case as non-negative values, while still
returning negative value for errors.
In all of such cases, correctness is preserved due to two's complement
encoding of negative values and the fact that all helpers return values with
32-bit absolute value. Two's complement ensures that for negative values
higher 32 bits are all ones and when truncated, leave valid negative 32-bit
value with the same value. Non-negative values have upper 32 bits set to zero
and similarly preserve value when high 32 bits are truncated. This means that
just casting to int/u32 is correct and efficient (and in ALU32 mode doesn't
require any extra shifts).
To minimize the chances of regressions, two code patterns were investigated,
as mentioned above. For both patterns, BPF assembly was analyzed in
ALU32/NO-ALU32 compiler modes, both with current 32-bit int return type and
new 64-bit long return type.
Case 1. Variable-length data reading and concatenation. This is quite
ubiquitous pattern in tracing/monitoring applications, reading data like
process's environment variables, file path, etc. In such case, many pieces of
string-like variable-length data are read into a single big buffer, and at the
end of the process, only a part of array containing actual data is sent to
user-space for further processing. This case is tested in test_varlen.c
selftest (in the next patch). Code flow is roughly as follows:
void *payload = &sample->payload;
u64 len;
len = bpf_probe_read_kernel_str(payload, MAX_SZ1, &source_data1);
if (len <= MAX_SZ1) {
payload += len;
sample->len1 = len;
}
len = bpf_probe_read_kernel_str(payload, MAX_SZ2, &source_data2);
if (len <= MAX_SZ2) {
payload += len;
sample->len2 = len;
}
/* and so on */
sample->total_len = payload - &sample->payload;
/* send over, e.g., perf buffer */
There could be two variations with slightly different code generated: when len
is 64-bit integer and when it is 32-bit integer. Both variations were analysed.
BPF assembly instructions between two successive invocations of
bpf_probe_read_kernel_str() were used to check code regressions. Results are
below, followed by short analysis. Left side is using helpers with int return
type, the right one is after the switch to long.
ALU32 + INT ALU32 + LONG
=========== ============
64-BIT (13 insns): 64-BIT (10 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: if w0 > 256 goto +9 <LBB0_4> 18: if r0 > 256 goto +6 <LBB0_4>
19: w1 = w0 19: r1 = 0 ll
20: r1 <<= 32 21: *(u64 *)(r1 + 0) = r0
21: r1 s>>= 32 22: r6 = 0 ll
22: r2 = 0 ll 24: r6 += r0
24: *(u64 *)(r2 + 0) = r1 00000000000000c8 <LBB0_4>:
25: r6 = 0 ll 25: r1 = r6
27: r6 += r1 26: w2 = 256
00000000000000e0 <LBB0_4>: 27: r3 = 0 ll
28: r1 = r6 29: call 115
29: w2 = 256
30: r3 = 0 ll
32: call 115
32-BIT (11 insns): 32-BIT (12 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: if w0 > 256 goto +7 <LBB1_4> 18: if w0 > 256 goto +8 <LBB1_4>
19: r1 = 0 ll 19: r1 = 0 ll
21: *(u32 *)(r1 + 0) = r0 21: *(u32 *)(r1 + 0) = r0
22: w1 = w0 22: r0 <<= 32
23: r6 = 0 ll 23: r0 >>= 32
25: r6 += r1 24: r6 = 0 ll
00000000000000d0 <LBB1_4>: 26: r6 += r0
26: r1 = r6 00000000000000d8 <LBB1_4>:
27: w2 = 256 27: r1 = r6
28: r3 = 0 ll 28: w2 = 256
30: call 115 29: r3 = 0 ll
31: call 115
In ALU32 mode, the variant using 64-bit length variable clearly wins and
avoids unnecessary zero-extension bit shifts. In practice, this is even more
important and good, because BPF code won't need to do extra checks to "prove"
that payload/len are within good bounds.
32-bit len is one instruction longer. Clang decided to do 64-to-32 casting
with two bit shifts, instead of equivalent `w1 = w0` assignment. The former
uses extra register. The latter might potentially lose some range information,
but not for 32-bit value. So in this case, verifier infers that r0 is [0, 256]
after check at 18:, and shifting 32 bits left/right keeps that range intact.
We should probably look into Clang's logic and see why it chooses bitshifts
over sub-register assignments for this.
NO-ALU32 + INT NO-ALU32 + LONG
============== ===============
64-BIT (14 insns): 64-BIT (10 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: r0 <<= 32 18: if r0 > 256 goto +6 <LBB0_4>
19: r1 = r0 19: r1 = 0 ll
20: r1 >>= 32 21: *(u64 *)(r1 + 0) = r0
21: if r1 > 256 goto +7 <LBB0_4> 22: r6 = 0 ll
22: r0 s>>= 32 24: r6 += r0
23: r1 = 0 ll 00000000000000c8 <LBB0_4>:
25: *(u64 *)(r1 + 0) = r0 25: r1 = r6
26: r6 = 0 ll 26: r2 = 256
28: r6 += r0 27: r3 = 0 ll
00000000000000e8 <LBB0_4>: 29: call 115
29: r1 = r6
30: r2 = 256
31: r3 = 0 ll
33: call 115
32-BIT (13 insns): 32-BIT (13 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: r1 = r0 18: r1 = r0
19: r1 <<= 32 19: r1 <<= 32
20: r1 >>= 32 20: r1 >>= 32
21: if r1 > 256 goto +6 <LBB1_4> 21: if r1 > 256 goto +6 <LBB1_4>
22: r2 = 0 ll 22: r2 = 0 ll
24: *(u32 *)(r2 + 0) = r0 24: *(u32 *)(r2 + 0) = r0
25: r6 = 0 ll 25: r6 = 0 ll
27: r6 += r1 27: r6 += r1
00000000000000e0 <LBB1_4>: 00000000000000e0 <LBB1_4>:
28: r1 = r6 28: r1 = r6
29: r2 = 256 29: r2 = 256
30: r3 = 0 ll 30: r3 = 0 ll
32: call 115 32: call 115
In NO-ALU32 mode, for the case of 64-bit len variable, Clang generates much
superior code, as expected, eliminating unnecessary bit shifts. For 32-bit
len, code is identical.
So overall, only ALU-32 32-bit len case is more-or-less equivalent and the
difference stems from internal Clang decision, rather than compiler lacking
enough information about types.
Case 2. Let's look at the simpler case of checking return result of BPF helper
for errors. The code is very simple:
long bla;
if (bpf_probe_read_kenerl(&bla, sizeof(bla), 0))
return 1;
else
return 0;
ALU32 + CHECK (9 insns) ALU32 + CHECK (9 insns)
==================================== ====================================
0: r1 = r10 0: r1 = r10
1: r1 += -8 1: r1 += -8
2: w2 = 8 2: w2 = 8
3: r3 = 0 3: r3 = 0
4: call 113 4: call 113
5: w1 = w0 5: r1 = r0
6: w0 = 1 6: w0 = 1
7: if w1 != 0 goto +1 <LBB2_2> 7: if r1 != 0 goto +1 <LBB2_2>
8: w0 = 0 8: w0 = 0
0000000000000048 <LBB2_2>: 0000000000000048 <LBB2_2>:
9: exit 9: exit
Almost identical code, the only difference is the use of full register
assignment (r1 = r0) vs half-registers (w1 = w0) in instruction #5. On 32-bit
architectures, new BPF assembly might be slightly less optimal, in theory. But
one can argue that's not a big issue, given that use of full registers is
still prevalent (e.g., for parameter passing).
NO-ALU32 + CHECK (11 insns) NO-ALU32 + CHECK (9 insns)
==================================== ====================================
0: r1 = r10 0: r1 = r10
1: r1 += -8 1: r1 += -8
2: r2 = 8 2: r2 = 8
3: r3 = 0 3: r3 = 0
4: call 113 4: call 113
5: r1 = r0 5: r1 = r0
6: r1 <<= 32 6: r0 = 1
7: r1 >>= 32 7: if r1 != 0 goto +1 <LBB2_2>
8: r0 = 1 8: r0 = 0
9: if r1 != 0 goto +1 <LBB2_2> 0000000000000048 <LBB2_2>:
10: r0 = 0 9: exit
0000000000000058 <LBB2_2>:
11: exit
NO-ALU32 is a clear improvement, getting rid of unnecessary zero-extension bit
shifts.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-1-andriin@fb.com
Before, we took a reference to the creating netns if the new netns was
different. This caused issues with circular references, with two
wireguard interfaces swapping namespaces. The solution is to rather not
take any extra references at all, but instead simply invalidate the
creating netns pointer when that netns is deleted.
In order to prevent this from happening again, this commit improves the
rough object leak tracking by allowing it to account for created and
destroyed interfaces, aside from just peers and keys. That then makes it
possible to check for the object leak when having two interfaces take a
reference to each others' namespaces.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add statements about bpftool being able to discover process info, holding
reference to BPF map, prog, link, or BTF. Show example output as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-10-andriin@fb.com
Adapt Makefile to support BPF skeleton generation beyond single profiler.bpf.c
case. Also add vmlinux.h generation and switch profiler.bpf.c to use it.
clang-bpf-global-var feature is extended and renamed to clang-bpf-co-re to
check for support of preserve_access_index attribute, which, together with BTF
for global variables, is the minimum requirement for modern BPF programs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-7-andriin@fb.com
Build minimal "bootstrap mode" bpftool to enable skeleton (and, later,
vmlinux.h generation), instead of building almost complete, but slightly
different (w/o skeletons, etc) bpftool to bootstrap complete bpftool build.
Current approach doesn't scale well (engineering-wise) when adding more BPF
programs to bpftool and other complicated functionality, as it requires
constant adjusting of the code to work in both bootstrapped mode and normal
mode.
So it's better to build only minimal bpftool version that supports only BPF
skeleton code generation and BTF-to-C conversion. Thankfully, this is quite
easy to accomplish due to internal modularity of bpftool commands. This will
also allow to keep adding new functionality to bpftool in general, without the
need to care about bootstrap mode for those new parts of bpftool.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-6-andriin@fb.com
Move functions that parse map and prog by id/tag/name/etc outside of
map.c/prog.c, respectively. These functions are used outside of those files
and are generic enough to be in common. This also makes heavy-weight map.c and
prog.c more decoupled from the rest of bpftool files and facilitates more
lightweight bootstrap bpftool variant.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-5-andriin@fb.com
Validate libbpf is able to handle weak and strong kernel symbol externs in BPF
code correctly.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-4-andriin@fb.com
Add support for another (in addition to existing Kconfig) special kind of
externs in BPF code, kernel symbol externs. Such externs allow BPF code to
"know" kernel symbol address and either use it for comparisons with kernel
data structures (e.g., struct file's f_op pointer, to distinguish different
kinds of file), or, with the help of bpf_probe_user_kernel(), to follow
pointers and read data from global variables. Kernel symbol addresses are
found through /proc/kallsyms, which should be present in the system.
Currently, such kernel symbol variables are typeless: they have to be defined
as `extern const void <symbol>` and the only operation you can do (in C code)
with them is to take its address. Such extern should reside in a special
section '.ksyms'. bpf_helpers.h header provides __ksym macro for this. Strong
vs weak semantics stays the same as with Kconfig externs. If symbol is not
found in /proc/kallsyms, this will be a failure for strong (non-weak) extern,
but will be defaulted to 0 for weak externs.
If the same symbol is defined multiple times in /proc/kallsyms, then it will
be error if any of the associated addresses differs. In that case, address is
ambiguous, so libbpf falls on the side of caution, rather than confusing user
with randomly chosen address.
In the future, once kernel is extended with variables BTF information, such
ksym externs will be supported in a typed version, which will allow BPF
program to read variable's contents directly, similarly to how it's done for
fentry/fexit input arguments.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-3-andriin@fb.com
Switch existing Kconfig externs to be just one of few possible kinds of more
generic externs. This refactoring is in preparation for ksymbol extern
support, added in the follow up patch. There are no functional changes
intended.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-2-andriin@fb.com
Add a test that checks that pedit adjusts port numbers of tcp and udp
packets.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a bunch of getter for various aspects of BPF map. Some of these attribute
(e.g., key_size, value_size, type, etc) are available right now in struct
bpf_map_def, but this patch adds getter allowing to fetch them individually.
bpf_map_def approach isn't very scalable, when ABI stability requirements are
taken into account. It's much easier to extend libbpf and add support for new
features, when each aspect of BPF map has separate getter/setter.
Getters follow the common naming convention of not explicitly having "get" in
its name: bpf_map__type() returns map type, bpf_map__key_size() returns
key_size. Setters, though, explicitly have set in their name:
bpf_map__set_type(), bpf_map__set_key_size().
This patch ensures we now have a getter and a setter for the following
map attributes:
- type;
- max_entries;
- map_flags;
- numa_node;
- key_size;
- value_size;
- ifindex.
bpf_map__resize() enforces unnecessary restriction of max_entries > 0. It is
unnecessary, because libbpf actually supports zero max_entries for some cases
(e.g., for PERF_EVENT_ARRAY map) and treats it specially during map creation
time. To allow setting max_entries=0, new bpf_map__set_max_entries() setter is
added. bpf_map__resize()'s behavior is preserved for backwards compatibility
reasons.
Map ifindex getter is added as well. There is a setter already, but no
corresponding getter. Fix this assymetry as well. bpf_map__set_ifindex()
itself is converted from void function into error-returning one, similar to
other setters. The only error returned right now is -EBUSY, if BPF map is
already loaded and has corresponding FD.
One lacking attribute with no ability to get/set or even specify it
declaratively is numa_node. This patch fixes this gap and both adds
programmatic getter/setter, as well as adds support for numa_node field in
BTF-defined map.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200621062112.3006313-1-andriin@fb.com
Systems that doesn't yet have the very latest linux/bpf.h header, enum
bpf_stats_type will be undefined, causing compilation warnings. Prevents this
by forward-declaring enum.
Fixes: 0bee106716 ("libbpf: Add support for command BPF_ENABLE_STATS")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200621031159.2279101-1-andriin@fb.com
Add selftests to test access to map pointers from bpf program for all
map types except struct_ops (that one would need additional work).
verifier test focuses mostly on scenarios that must be rejected.
prog_tests test focuses on accessing multiple fields both scalar and a
nested struct from bpf program and verifies that those fields have
expected values.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/139a6a17f8016491e39347849b951525335c6eb4.1592600985.git.rdna@fb.com
There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
If the kernel erroneously allows WRGSBASE and user code writes a
negative value, paranoid_entry will get confused. Check for this by
writing a negative value to GSBASE and doing SYSENTER with TF set. A
successful run looks like:
[RUN] SYSENTER with TF, invalid state, and GSBASE < 0
[SKIP] Illegal instruction
A failed run causes a kernel hang, and I believe it's because we
double-fault and then get a never ending series of page faults and,
when we exhaust the double fault stack we double fault again,
starting the process over.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/f4f71efc91b9eae5e3dae21c9aee1c70cf5f370e.1590620529.git.luto@kernel.org
Quite a lot of fixes here for no single reason. There's a collection of
the usual sort of device specific fixes and also a bunch of people have
been working on spidev and the userspace test program spidev_test so
they've got an unusually large collection of small fixes.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7wl/8THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NJBB/4oTOxPIfkKQyPcSTQB8FC6AHJ5Z8FT
/4dtK4U32rn5Sms/CHNXMMFxomBgB46Ud19KJ/bEgqugJfI9Vl0bl9fZT+sDyVU3
rFPthVluIprFe1bITyfcgYmjRoznLRdzj9LMFsAWIe3Vmy584TdvXbl8n5COu5Wh
6sR6SuQnEn65x1HC4++3IsG70+ogz81sFRapk/7jXwS+YdwzWIqtN2s2IlUcTmcy
ylijl04XUSyo6e/v/sjZaaRmIz72mW+HbMKW4iC0mGZ6yuACoy7zop9BuwAg6S7z
dFDyqTZ5gq72ZeJc7fuco1y7jqQoKUC1oTRghPlbq2XG3Huta80l415l
=32lr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Quite a lot of fixes here for no single reason.
There's a collection of the usual sort of device specific fixes and
also a bunch of people have been working on spidev and the userspace
test program spidev_test so they've got an unusually large collection
of small fixes"
* tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: fix a potential use-after-free in spidev_release()
spi: spidev: fix a race between spidev_release and spidev_remove
spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
spi: uapi: spidev: Use TABs for alignment
spi: spi-fsl-dspi: Free DMA memory with matching function
spi: tools: Add macro definitions to fix build errors
spi: tools: Make default_tx/rx and input_tx static
spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
spi: rspi: Use requested instead of maximum bit rate
spi: spidev_test: Use %u to format unsigned numbers
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
On some platforms the default encoding is not utf-8, which causes an
UnicodeDecodeError when reading the flamegraph template and writing the
flamegraph
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200619153232.203537-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
poll events should be 32-bits to cover EPOLLEXCLUSIVE.
Explicit word-swap the poll32_events for big endian to make sure the ABI
is not changed. We call this feature IORING_FEAT_POLL_32BITS,
applications who want to use EPOLLEXCLUSIVE should check the feature bit
first.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options
support for vxlan"), the geneve opt output use key word "geneve_opts"
instead of "geneve_opt". To make compatibility for both old and new
iproute2, let's accept both "geneve_opt" and "geneve_opts".
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new strict mode functionality is tested in different configurations and
on different network namespaces.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXu1jrRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCMAP91nOccE3X+Nvc3zET3isDWnl1tWJxk
icsBgN/JwBRuTAD/dnWTHIWM2/5lTiagvyVsmINdJHP6JLr8T7dpN9tlxAQ=
=Cuo7
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
- Few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings.
- Cleanup unused pm callbacks in virtio ccw.
- Replace kmalloc + memset with kzalloc in crypto.
- Use $(LD) for vDSO linkage to make clang happy.
- Fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res().
- Fix workqueue cpumask warning when NUMA=n and nr_node_ids=2.
- Reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio.
- Few fixes to use scnprintf() instead of snprintf().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7uJy8ACgkQjYWKoQLX
FBitMwgAovHP6O19ZS2RE2Ps20CjM+z0sLLGHF6aMrV7OqmOWrNnFzN4jT2j42Ck
idSZ6sehVd3Uj6K8NnzrlSS3sjGRhVaQJEjjN+rLyw0HBwxspJJfW5HgcoMtqNH1
oo+nt+zw5jk+6MqHx4QEwTxN5rgGs6UMhiLIAIlkDu4bivgohvGUxe4RUrN/mINx
cdYqomCkvovLT5sBTaWyXKNCDAdAWgNpOfdqc9MjOUXSbUg3lrUol0gUULzenPo7
wUN+sZ0di0Ox0+2+4m8LU1av/kMTLSSvnR9DW5KdpGTon1nwpZcdJnhI5o1v7uaU
pIaMOYNieEHJ2DnieR9iBBSbGoNCmw==
=gkgN
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings
- cleanup unused pm callbacks in virtio ccw
- replace kmalloc + memset with kzalloc in crypto
- use $(LD) for vDSO linkage to make clang happy
- fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res()
- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2
- reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio
- a few fixes to use scnprintf() instead of snprintf()
* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix syscall_get_error for compat processes
s390/qdio: warn about unexpected SLSB states
s390/qdio: clean up usage of qdio_data
s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
s390/vdso: fix vDSO clock_getres()
s390/vdso: Use $(LD) instead of $(CC) to link vDSO
s390/protvirt: use scnprintf() instead of snprintf()
s390: use scnprintf() in sys_##_prefix##_##_name##_show
s390/crypto: use scnprintf() instead of snprintf()
s390/zcrypt: use kzalloc
s390/virtio: remove unused pm callbacks
s390/qdio: reduce SLSB writes during Input Queue processing
selftests/seccomp: s390 shares the syscall and return value register
s390/ptrace: fix setting syscall number
s390/ptrace: pass invalid syscall numbers to tracing
s390/ptrace: return -ENOSYS when invalid syscall is supplied
s390/seccomp: pass syscall arguments via seccomp_data
s390/qdio: fine-tune SLSB update
This Kselftest update for Linux 5.8-rc2 consists of:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
-----BEGIN PGP SIGNATURE-----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=nqUq
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest cleanups from Shuah Khan:
- ftrace "requires:" list for simplifying and unifying requirement
checks for each test case, adding "requires:" line instead of
checking required ftrace interfaces in each test case.
- a minor spelling correction patch
* tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Support ":README" suffix for requires
selftests/ftrace: Support ":tracer" suffix for requires
selftests/ftrace: Convert check_filter_file() with requires list
selftests/ftrace: Convert required interface checks into requires list
selftests/ftrace: Add "requires:" list support
selftests/ftrace: Return unsupported for the unconfigured features
selftests/ftrace: Allow ":" in description
tools: testing: ftrace: trigger: fix spelling mistake
The ETF qdisc can queue skbs that it could not pace on the errqueue.
Address a few issues in the selftest
- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type
v2:
- fix a few checkpatch --strict indentation warnings
Fixes: ea6a547669 ("selftests/net: make so_txtime more robust to timer variance")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Relicense it to be compatible with the rest of bpftool files.
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200619222024.519774-1-andriin@fb.com
Added two test_verifier subtests for 32bit pointer/scalar arithmetic
with BPF_SUB operator. They are passing verifier now.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200618234632.3321367-1-yhs@fb.com
Make it bit easier to parse the kernel logs during the selftests by
adding a "===== TEST: $test =====" delimiter when each individual test
begins.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-4-joe.lawrence@redhat.com
The livepatch selftests currently grep on "taints" to filter out
"tainting kernel with TAINT_LIVEPATCH" messages which may be logged when
loading livepatch modules.
Further filter the log to drop "loading out-of-tree module taints
kernel" in the rare case the klp_test modules have been built
out-of-tree.
Look for the longer "taints kernel" or "tainting kernel" strings to
avoid inadvertent partial matching.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-3-joe.lawrence@redhat.com
