Since the PMU callback runs in irq context, it synchronizes with gt
reset using the reset count. We could run into a case where the PMU
callback could read the reset count before it is updated. This has a
potential of corrupting the busyness stats.
In addition to the reset count, check if the reset bit is set before
capturing busyness.
In addition save the previous stats only if you intend to update them.
v2:
- The 2 reset counts captured in the PMU callback can end up being the
same if they were captured right after the count is incremented in the
reset flow. This can lead to a bad busyness state. Ensure that reset
is not in progress when the initial reset count is captured.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108211057.68783-1-umesh.nerlige.ramappa@intel.com
The gpu coredump typically takes place in a dma_fence signalling
critical path, and hence can't use GFP_KERNEL allocations, as that
means we might hit deadlocks under memory pressure. However
changing to __GFP_KSWAPD_RECLAIM which will be done in an upcoming
patch will instead mean a lower chance of the allocation succeeding.
In particular large contigous allocations like the coredump page
vector.
Remove the page vector in favor of a linked list of single pages.
Use the page lru list head as the list link, as the page owner is
allowed to do that.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108174547.979714-2-thomas.hellstrom@linux.intel.com
The signaled bit is already used for quick testing if a fence is signaled.
On top of that, it's a terrible abuse of dma-fence api, and in the common
case where the object is already locked by the caller, the trylock will fail.
If it were useful, the core dma-api would have exposed the same functionality.
The fact that i915 has a dma_resv_utils.c file should be a warning that the
functionality either belongs in core, or is not very useful at all.
In this case the latter.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Improve commit message]
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021103605.735002-3-maarten.lankhorst@linux.intel.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com> #irc
Maarten requested a backmerge due his work depending on subtle semantic
changes introduced by:
7e2e69ed46 ("drm/i915: Fix i915_request fence wait semantics")
2cbb8d4d67 ("drm/i915: use new iterator in i915_gem_object_wait_reservation")
Both should probably have been merged to drm-intel-gt-next anyway.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Don't wait sync while migrating, but rather make the GPU blit await the
dependencies and add a moving fence to the object.
This also enables asynchronous VRAM management in that on eviction,
rather than waiting for the moving fence to expire before freeing VRAM,
it is freed immediately and the fence is stored with the VRAM manager and
handed out to newly allocated objects to await before clears and swapins,
or for kernel objects before setting up gpu vmas or mapping.
To collect dependencies before migrating, add a set of utilities that
coalesce these to a single dma_fence.
What is still missing for fully asynchronous operation is asynchronous vma
unbinding, which is still to be implemented.
This commit substantially reduces execution time in the gem_lmem_swapping
test.
v2:
- Make a couple of functions static.
v4:
- Fix some style issues (Matthew Auld)
- Audit and add more checks for ghost objects (Matthew Auld)
- Add more documentation for the i915_deps utility (Mattew Auld)
- Simplify the i915_deps_sync() function
v6:
- Re-check for fence signaled before returning -EBUSY (Matthew Auld)
- Use dma_resv_iter_is_exclusive() (Matthew Auld)
- Await all dma-resv fences before a migration blit (Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122214554.371864-6-thomas.hellstrom@linux.intel.com
With async migration, the shrinker may end up wanting to release the
pages of an object while the migration blit is still running, since
the GT migration code doesn't set up VMAs and the shrinker is thus
oblivious to the fact that the GPU is still using the pages.
Add waiting for gpu in the shrinker_release_pages() op and an
argument to that function indicating whether the shrinker expects it
to not wait for gpu. In the latter case the shrinker_release_pages()
op will return -EBUSY if the object is not idle.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122214554.371864-5-thomas.hellstrom@linux.intel.com
There is an interesting refcounting loop:
struct intel_memory_region has a struct ttm_resource_manager,
ttm_resource_manager->move may hold a reference to i915_request,
i915_request may hold a reference to intel_context,
intel_context may hold a reference to drm_i915_gem_object,
drm_i915_gem_object may hold a reference to intel_memory_region.
Break this loop by dropping region reference counting.
In addition, Have regions with a manager moving fence make sure
that all region objects are released before freeing the region.
v6:
- Fix a code comment.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122214554.371864-4-thomas.hellstrom@linux.intel.com
For now, we will only allow async migration when TTM is used,
so the paths we care about are related to TTM.
The mmap path is handled by having the fence in ttm_bo->moving,
when pinning, the binding only becomes available after the moving
fence is signaled, and pinning a cpu map will only work after
the moving fence signals.
This should close all holes where userspace can read a buffer
before it's fully migrated.
v2:
- Fix a couple of SPARSE warnings
v3:
- Fix a NULL pointer dereference
v4:
- Ditch the moving fence waiting for i915_vma_pin_iomap() and
replace with a verification that the vma is already bound.
(Matthew Auld)
- Squash with a previous patch introducing moving fence waiting and
accessing interfaces (Matthew Auld)
- Rename to indicated that we also add support for sync waiting.
v5:
- Fix check for NULL and unreferencing i915_vma_verify_bind_complete()
(Matthew Auld)
- Fix compilation failure if !CONFIG_DRM_I915_DEBUG_GEM
- Fix include ordering. (Matthew Auld)
v7:
- Fix yet another compilation failure with clang if
!CONFIG_DRM_I915_DEBUG_GEM
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122214554.371864-2-thomas.hellstrom@linux.intel.com
Irrespective of the backend for request submissions, busyness for an
engine with an active context is calculated using:
busyness = total + (current_time - context_switch_in_time)
In execlists mode of operation, the context switch events are handled
by the CPU. Context switch in/out time and current_time are captured
in CPU time domain using ktime_get().
In GuC mode of submission, context switch events are handled by GuC and
the times in the above formula are captured in GT clock domain. This
information is shared with the CPU through shared memory. This results
in 2 caveats:
1) The time taken between start of a batch and the time that CPU is able
to see the context_switch_in_time in shared memory is dependent on GuC
and memory bandwidth constraints.
2) Determining current_time requires an MMIO read that can take anywhere
between a few us to a couple ms. A reference CPU time is captured soon
after reading the MMIO so that the caller can compare the cpu delta
between 2 busyness samples. The issue here is that the CPU delta and the
busyness delta can be skewed because of the time taken to read the
register.
These 2 factors affect the accuracy of the selftest -
live_engine_busy_stats. For (1) the selftest waits until busyness stats
are visible to the CPU. The effects of (2) are more prominent for the
current busyness sample period of 100 us. Increase the busyness sample
period from 100 us to 10 ms to overccome (2).
v2: Fix checkpatch issues
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211115221640.30793-1-umesh.nerlige.ramappa@intel.com
drm-misc-next for 5.17:
UAPI Changes:
* Remove restrictions on DMA_BUF_SET_NAME ioctl
* connector: State of privacy screen
* sysfs: Send hotplug uevent
Cross-subsystem Changes:
* clk/bmc-2835: Fixes
* dma-buf: Add dma_resv selftest; Error-handling fixes; Add debugfs
helpers; Remove dma_resv_get_excl_unlocked(); Documentation fixes
* pwm: Introduce of_pwm_single_xlate()
Core Changes:
* Support for privacy screens
* Make drm_irq.c legacy
* Fix __stack_depot_* name conflict
* Documentation fixes
* Fixes and cleanups
* dp-helper: Reuse 8b/10b link-training delay helpers
* format-helper: Update interfaces
* fb-helper: Allocate shadow buffer of correct size
* gem: Link GEM SHMEM and CMA helpers into separate modules; Use
dma_resv iterator; Import DMA_BUF namespace into GEM-helper modules
* gem/shmem-helper: Interface cleanups
* scheduler: Grab fence in drm_sched_job_add_implicit_dependencies();
Lockdep fixes
* kms-helpers: Link several files from core into the KMS-helper module
Driver Changes:
* Use dma_resv_iter in several places
* Fixes and cleanups
* amdgpu: Use drm_kms_helper_connector_hotplug_event(); Get all fences
at once
* bridge: Switch to managed MIPI DSI helpers in several places; Register
and attach during probe in several places; Convert to YAML in several
places
* bridge/anx7625: Support MIPI DPI input; Support HDMI audio; Fixes
* bridge/dw-hdmi: Allow interlace on bridge
* bridge/ps8640: Enable PM; Support aux-bus
* bridge/tc358768: Enabled reference clock; Support pulse mode;
Modesetting fixes
* bridge/ti-sn65dsi86: Use regmap_bulk_write(); Implement PWM
* etnaviv: Get all fences at once
* gma500: GEM object cleanups; Remove generic drivers in probe function
* i915: Support VESA panel backlights
* ingenic: Fixes and cleanups
* kirin: Adjust probe order
* kmb: Enable framebuffer console
* lima: Kconfig fixes
* meson: Refactoring to supperot DRM_BRIDGE_ATTACH_NO_ENCODER
* msm: Fixes and cleanups
* msm/dsi: Adjust probe order
* omap: Fixes and cleanups
* nouveau: CRC fixes; Validate LUTs in atomic check; Set HDMI AVI RGB
quantization to FULL; Fixes and cleanups
* panel: Support Innolux G070Y2-T02, Vivax TPC-9150, JDI R63452,
Newhaven 1.8-128160EF, Wanchanglong W552964ABA, Novatek NT35950,
BOE BF060Y8M, Sony Tulip Truly NT35521; Use dev_err_probe() throughout
drivers; Fixes and cleanups
* panel/ili9881c: Orientation fixes
* radeon: Use dma_resv_wait_timeout()
* rockchip: Add timeout for DSP hold; Suspend/resume fixes; PLL clock
fixes; Implement mmap in GEM object functions
* simpledrm: Support FB_DAMAGE_CLIPS and virtual screen sizes
* sun4i: Use CMA helpers without vmap support
* tidss: Fixes and cleanups
* v3d: Cleanups
* vc4: Fix HDMI-CEC hang when display is off; Power on HDMI controller
while disabling; Support 4k@60 Hz modes; Fixes and cleanups
* video: Convert to sysfs_emit() in several places
* video/omapfb: Fix fall-through
* virtio: Overflow fixes
* xen: Implement mmap as GEM object functions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YZYZSypIrr+qcih3@linux-uq9g.fritz.box
We currently have to special case vma->obj being NULL because
of gen6 ppgtt and mock_engine. Fix gen6 ppgtt, so we may soon
be able to remove a few checks. As the object only exists as
a fake object pointing to ggtt, we have no backing storage,
so no real object is created. It just has to look real enough.
Also kill pin_mutex, it's not compatible with ww locking,
and we can use the vm lock instead.
v2:
- Drop IS_SHRINKABLE and shorten overly long line
v3:
- Checkpatch fix for alignment
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117142024.1043017-2-matthew.auld@intel.com
In intel_context_do_pin_ww, when calling into the pre_pin hook(which is
passed the ww context) it could in theory return -EDEADLK(which is very
likely with debug kernels), once we start adding more ww locking in there,
like in the next patch. If so then we need to be mindful of having to
restart the do_pin at this point.
If this is the kernel_context, or some other early in-kernel context
where we have yet to setup the default_state, then we always inhibit the
context restore, and instead rely on the delayed active_release to set
the CONTEXT_VALID_BIT for us(if we even care), which should indicate
that we have context switched away, and that our newly saved context
state should now be valid. However, since we currently grab the active
reference before the potential ww dance, we can end up setting the
CONTEXT_VALID_BIT much too early, if we need to backoff, and then upon
re-trying the do_pin, we could potentially cause the hardware to
incorrectly load some garbage context state when later context switching
to that context, but at the very least this will trigger the
GEM_BUG_ON() in __engine_unpark. For now let's just move any ww dance
stuff prior to arming the active reference.
For normal user contexts this shouldn't be a concern, since we should
already have the default_state ready when initialising the lrc state,
and so there should be no concern with active_release somehow
prematurely setting the CONTEXT_VALID_BIT.
v2(Thomas):
- Also re-order the onion unwind
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117142024.1043017-1-matthew.auld@intel.com
Hooray! We've managed to hit enough bugs upstream that I've been able to
come up with a pretty solid explanation for how backlight controls are
actually supposed to be detected and used these days. As well, having the
rest of the PWM bits in VESA's backlight interface implemented seems to
have fixed all of the problematic brightness controls laptop panels that
we've hit so far.
So, let's actually document this instead of just calling the laptop panels
liars. As well, I would like to formally apologize to all of the laptop
panels I called liars. I'm sorry laptop panels, hopefully you can all
forgive me and we can move past this~
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-6-lyude@redhat.com
Now that we've added support to i915 for controlling panel backlights that
need PWM to be enabled/disabled, let's finalize this and add support for
controlling brightness levels via PWM as well. This should hopefully put us
towards the path of supporting _ALL_ backlights via VESA's DPCD interface
which would allow us to finally start trusting the DPCD again.
Note however that we still don't enable using this by default on i915 when
it's not needed, primarily because I haven't yet had a chance to confirm if
it's safe to do this on the one machine in Intel's CI that had an issue
with this: samus-fi-bdw. I have done basic testing of this on other
machines though, by manually patching i915 to force it into PWM-only mode
on some of my laptops.
v2:
* Correct documentation (thanks Doug!)
* Get rid of backlight caps
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Cc: Rajeev Nandan <rajeevny@codeaurora.org>
Cc: Satadru Pramanik <satadru@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-5-lyude@redhat.com
This simply adds proper support for panel backlights that can be controlled
via VESA's backlight control protocol, but which also require that we
enable and disable the backlight via PWM instead of via the DPCD interface.
We also enable this by default, in order to fix some people's backlights
that were broken by not having this enabled.
For reference, backlights that require this and use VESA's backlight
interface tend to be laptops with hybrid GPUs, but this very well may
change in the future.
v4:
* Make sure that we call intel_backlight_level_to_pwm() in
intel_dp_aux_vesa_enable_backlight() - vsyrjala
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/3680
Fixes: fe7d52bcca ("drm/i915/dp: Don't use DPCD backlights that need PWM enable/disable")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-2-lyude@redhat.com
Pre-HSW platforms don't use the gt SSEU structures; this means that
calling intel_sseu_get_subslices() on slice 0 for these platforms will
trip a GEM_BUG_ON(slice >= sseu->max_slices) warning.
Let's move the DSS lookup for a DG2 workaround into a helper function
that will only get called after we've already decided that we're on a
DG2 platform.
Fixes: 645cc0b9d9 ("drm/i915/dg2: Add initial gt/ctx/engine workarounds")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112160107.1593906-1-matthew.d.roper@intel.com
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.
Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
