Add some logging to the core users of the fs_context log so that
information can be extracted from them as to the reason for failure.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pass it fs_context instead of fs_type/flags/root triple, have
it return int instead of dentry and make it deal with setting
fc->root.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note that this reference is *NOT* contributing to refcount of
cgroup_root in question and is valid only until cgroup_do_mount()
returns.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Store the results in cgroup_fs_context. There's a nasty twist caused
by the enabling/disabling subsystems - we can't do the checks sensitive
to that until cgroup_mutex gets grabbed. Frankly, these checks are
complete bullshit (e.g. all,none combination is accepted if all subsystems
are disabled; so's cpusets,none and all,cpusets when cpusets is disabled,
etc.), but touching that would be a userland-visible behaviour change ;-/
So we do parsing in ->parse_monolithic() and have the consistency checks
done in check_cgroupfs_options(), with the latter called (on already parsed
options) from cgroup1_get_tree() and cgroup1_reconfigure().
Freeing the strdup'ed strings is done from fs_context destructor, which
somewhat simplifies the life for cgroup1_{get_tree,reconfigure}().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Unfortunately, cgroup is tangled into kernfs infrastructure.
To avoid converting all kernfs-based filesystems at once,
we need to untangle the remount part of things, instead of
having it go through kernfs_sop_remount_fs(). Fortunately,
it's not hard to do.
This commit just gets cgroup/cgroup1 to use fs_context to
deliver options on mount and remount paths. Parsing those
is going to be done in the next commits; for now we do
pretty much what legacy case does.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* make the reference from superblock to cgroup_root counting -
do cgroup_put() in cgroup_kill_sb() whether we'd done
percpu_ref_kill() or not; matching grab is done when we allocate
a new root. That gives the same refcounting rules for all callers
of cgroup_do_mount() - a reference to cgroup_root has been grabbed
by caller and it either is transferred to new superblock or dropped.
* have cgroup_kill_sb() treat an already killed refcount as "just
don't bother killing it, then".
* after successful cgroup_do_mount() have cgroup1_mount() recheck
if we'd raced with mount/umount from somebody else and cgroup_root
got killed. In that case we drop the superblock and bugger off
with -ERESTARTSYS, same as if we'd found it in the list already
dying.
* don't bother with delayed initialization of refcount - it's
unreliable and not needed. No need to prevent attempts to bump
the refcount if we find cgroup_root of another mount in progress -
sget will reuse an existing superblock just fine and if the
other sb manages to die before we get there, we'll catch
that immediately after cgroup_do_mount().
* don't bother with kernfs_pin_sb() - no need for doing that
either.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It can be useful to inhibit all cgroup1 hierarchies especially during
transition and for debugging. cgroup_no_v1 can block hierarchies with
controllers which leaves out the named hierarchies. Expand it to
cover the named hierarchies so that "cgroup_no_v1=all,named" disables
all cgroup1 hierarchies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Marcin Pawlowski <mpawlowski@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It is unwise to take spin locks from the handlers of trace events.
Mainly, because they can introduce lockups, because it introduces locks
in places that are normally not tested. Worse yet, because trace events
are tucked away in the include/trace/events/ directory, locks that are
taken there are forgotten about.
As a general rule, I tell people never to take any locks in a trace
event handler.
Several cgroup trace event handlers call cgroup_path() which eventually
takes the kernfs_rename_lock spinlock. This injects the spinlock in the
code without people realizing it. It also can cause issues for the
PREEMPT_RT patch, as the spinlock becomes a mutex, and the trace event
handlers are called with preemption disabled.
By moving the calculation of the cgroup_path() out of the trace event
handlers and into a macro (surrounded by a
trace_cgroup_##type##_enabled()), then we could place the cgroup_path
into a string, and pass that to the trace event. Not only does this
remove the taking of the spinlock out of the trace event handler, but
it also means that the cgroup_path() only needs to be called once (it
is currently called twice, once to get the length to reserver the
buffer for, and once again to get the path itself. Now it only needs to
be done once.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Deadlock during cgroup migration from cpu hotplug path when a task T is
being moved from source to destination cgroup.
kworker/0:0
cpuset_hotplug_workfn()
cpuset_hotplug_update_tasks()
hotplug_update_tasks_legacy()
remove_tasks_in_empty_cpuset()
cgroup_transfer_tasks() // stuck in iterator loop
cgroup_migrate()
cgroup_migrate_add_task()
In cgroup_migrate_add_task() it checks for PF_EXITING flag of task T.
Task T will not migrate to destination cgroup. css_task_iter_start()
will keep pointing to task T in loop waiting for task T cg_list node
to be removed.
Task T
do_exit()
exit_signals() // sets PF_EXITING
exit_task_namespaces()
switch_task_namespaces()
free_nsproxy()
put_mnt_ns()
drop_collected_mounts()
namespace_unlock()
synchronize_rcu()
_synchronize_rcu_expedited()
schedule_work() // on cpu0 low priority worker pool
wait_event() // waiting for work item to execute
Task T inserted a work item in the worklist of cpu0 low priority
worker pool. It is waiting for expedited grace period work item
to execute. This work item will only be executed once kworker/0:0
complete execution of cpuset_hotplug_workfn().
kworker/0:0 ==> Task T ==>kworker/0:0
In case of PF_EXITING task being migrated from source to destination
cgroup, migrate next available task in source cgroup.
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
A new mount option "cpuset_v2_mode" is added to the v1 cgroupfs
filesystem to enable cpuset controller to use v2 behavior in a v1
cgroup. This mount option applies only to cpuset controller and have
no effect on other controllers.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch implements cgroup v2 thread support. The goal of the
thread mode is supporting hierarchical accounting and control at
thread granularity while staying inside the resource domain model
which allows coordination across different resource controllers and
handling of anonymous resource consumptions.
A cgroup is always created as a domain and can be made threaded by
writing to the "cgroup.type" file. When a cgroup becomes threaded, it
becomes a member of a threaded subtree which is anchored at the
closest ancestor which isn't threaded.
The threads of the processes which are in a threaded subtree can be
placed anywhere without being restricted by process granularity or
no-internal-process constraint. Note that the threads aren't allowed
to escape to a different threaded subtree. To be used inside a
threaded subtree, a controller should explicitly support threaded mode
and be able to handle internal competition in the way which is
appropriate for the resource.
The root of a threaded subtree, the nearest ancestor which isn't
threaded, is called the threaded domain and serves as the resource
domain for the whole subtree. This is the last cgroup where domain
controllers are operational and where all the domain-level resource
consumptions in the subtree are accounted. This allows threaded
controllers to operate at thread granularity when requested while
staying inside the scope of system-level resource distribution.
As the root cgroup is exempt from the no-internal-process constraint,
it can serve as both a threaded domain and a parent to normal cgroups,
so, unlike non-root cgroups, the root cgroup can have both domain and
threaded children.
Internally, in a threaded subtree, each css_set has its ->dom_cset
pointing to a matching css_set which belongs to the threaded domain.
This ensures that thread root level cgroup_subsys_state for all
threaded controllers are readily accessible for domain-level
operations.
This patch enables threaded mode for the pids and perf_events
controllers. Neither has to worry about domain-level resource
consumptions and it's enough to simply set the flag.
For more details on the interface and behavior of the thread mode,
please refer to the section 2-2-2 in Documentation/cgroup-v2.txt added
by this patch.
v5: - Dropped silly no-op ->dom_cgrp init from cgroup_create().
Spotted by Waiman.
- Documentation updated as suggested by Waiman.
- cgroup.type content slightly reformatted.
- Mark the debug controller threaded.
v4: - Updated to the general idea of marking specific cgroups
domain/threaded as suggested by PeterZ.
v3: - Dropped "join" and always make mixed children join the parent's
threaded subtree.
v2: - After discussions with Waiman, support for mixed thread mode is
added. This should address the issue that Peter pointed out
where any nesting should be avoided for thread subtrees while
coexisting with other domain cgroups.
- Enabling / disabling thread mode now piggy backs on the existing
control mask update mechanism.
- Bug fixes and cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
css_task_iter currently always walks all tasks. With the scheduled
cgroup v2 thread support, the iterator would need to handle multiple
types of iteration. As a preparation, add @flags to
css_task_iter_start() and implement CSS_TASK_ITER_PROCS. If the flag
is not specified, it walks all tasks as before. When asserted, the
iterator only walks the group leaders.
For now, the only user of the flag is cgroup v2 "cgroup.procs" file
which no longer needs to skip non-leader tasks in cgroup_procs_next().
Note that cgroup v1 "cgroup.procs" can't use the group leader walk as
v1 "cgroup.procs" doesn't mean "list all thread group leaders in the
cgroup" but "list all thread group id's with any threads in the
cgroup".
While at it, update cgroup_procs_show() to use task_pid_vnr() instead
of task_tgid_vnr(). As the iteration guarantees that the function
only sees group leaders, this doesn't change the output and will allow
sharing the function for thread iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, writes "cgroup.procs" and "cgroup.tasks" files are all
handled by __cgroup_procs_write() on both v1 and v2. This patch
reoragnizes the write path so that there are common helper functions
that different write paths use.
While this somewhat increases LOC, the different paths are no longer
intertwined and each path has more flexibility to implement different
behaviors which will be necessary for the planned v2 thread support.
v3: - Restructured so that cgroup_procs_write_permission() takes
@src_cgrp and @dst_cgrp.
v2: - Rolled in Waiman's task reference count fix.
- Updated on top of nsdelegate changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
The debug cgroup currently resides within cgroup-v1.c and is enabled
only for v1 cgroup. To enable the debug cgroup also for v2, it makes
sense to put the code into its own file as it will no longer be v1
specific. There is no change to the debug cgroup specific code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The reference count in the css_set data structure was used as a
proxy of the number of tasks attached to that css_set. However, that
count is actually not an accurate measure especially with thread mode
support. So a new variable nr_tasks is added to the css_set to keep
track of the actual task count. This new variable is protected by
the css_set_lock. Functions that require the actual task count are
updated to use the new variable.
tj: s/task_count/nr_tasks/ for consistency with cgroup_root->nr_cgrps.
Refreshed on top of cgroup/for-v4.13 which dropped on
css_set_populated() -> nr_tasks conversion.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup updates from Tejun Heo:
"Nothing major. Two notable fixes are Li's second stab at fixing the
long-standing race condition in the mount path and suppression of
spurious warning from cgroup_get(). All other changes are trivial"
* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: mark cgroup_get() with __maybe_unused
cgroup: avoid attaching a cgroup root to two different superblocks, take 2
cgroup: fix spurious warnings on cgroup_is_dead() from cgroup_sk_alloc()
cgroup: move cgroup_subsys_state parent field for cache locality
cpuset: Remove cpuset_update_active_cpus()'s parameter.
cgroup: switch to BUG_ON()
cgroup: drop duplicate header nsproxy.h
kernel: convert css_set.refcount from atomic_t to refcount_t
kernel: convert cgroup_namespace.count from atomic_t to refcount_t
Commit bfb0b80db5 ("cgroup: avoid attaching a cgroup root to two
different superblocks") is broken. Now we try to fix the race by
delaying the initialization of cgroup root refcnt until a superblock
has been allocated.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Tested-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit bfb0b80db5.
Andrei reports CRIU test hangs with the patch applied. The bug fixed
by the patch isn't too likely to trigger in actual uses. Revert the
patch for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com
Run this:
touch file0
for ((; ;))
{
mount -t cpuset xxx file0
}
And this concurrently:
touch file1
for ((; ;))
{
mount -t cpuset xxx file1
}
We'll trigger a warning like this:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4675 at lib/percpu-refcount.c:317 percpu_ref_kill_and_confirm+0x92/0xb0
percpu_ref_kill_and_confirm called more than once on css_release!
CPU: 1 PID: 4675 Comm: mount Not tainted 4.11.0-rc5+ #5
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
Call Trace:
dump_stack+0x63/0x84
__warn+0xd1/0xf0
warn_slowpath_fmt+0x5f/0x80
percpu_ref_kill_and_confirm+0x92/0xb0
cgroup_kill_sb+0x95/0xb0
deactivate_locked_super+0x43/0x70
deactivate_super+0x46/0x60
...
---[ end trace a79f61c2a2633700 ]---
Here's a race:
Thread A Thread B
cgroup1_mount()
# alloc a new cgroup root
cgroup_setup_root()
cgroup1_mount()
# no sb yet, returns NULL
kernfs_pin_sb()
# but succeeds in getting the refcnt,
# so re-use cgroup root
percpu_ref_tryget_live()
# alloc sb with cgroup root
cgroup_do_mount()
cgroup_kill_sb()
# alloc another sb with same root
cgroup_do_mount()
cgroup_kill_sb()
We end up using the same cgroup root for two different superblocks,
so percpu_ref_kill() will be called twice on the same root when the
two superblocks are destroyed.
We should fix to make sure the superblock pinning is really successful.
Cc: stable@vger.kernel.org # 3.16+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As found in grsecurity, this avoids exposing a kernel pointer through
the cgroup debug entries.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
It's not used by any of the scheduler methods, but <linux/sched/task_stack.h>
needs it to pick up STACK_END_MAGIC.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The task_lock()/task_unlock() APIs are not realated to core scheduling,
they are task lifetime APIs, i.e. they belong into <linux/sched/task.h>.
Move them.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_struct::signal and task_struct::sighand are pointers, which would normally make it
straightforward to not define those types in sched.h.
That is not so, because the types are accompanied by a myriad of APIs (macros and inline
functions) that dereference them.
Split the types and the APIs out of sched.h and move them into a new header, <linux/sched/signal.h>.
With this change sched.h does not know about 'struct signal' and 'struct sighand' anymore,
trying to put accessors into sched.h as a test fails the following way:
./include/linux/sched.h: In function ‘test_signal_types’:
./include/linux/sched.h:2461:18: error: dereferencing pointer to incomplete type ‘struct signal_struct’
^
This reduces the size and complexity of sched.h significantly.
Update all headers and .c code that relied on getting the signal handling
functionality from <linux/sched.h> to include <linux/sched/signal.h>.
The list of affected files in the preparatory patch was partly generated by
grepping for the APIs, and partly by doing coverage build testing, both
all[yes|mod|def|no]config builds on 64-bit and 32-bit x86, and an array of
cross-architecture builds.
Nevertheless some (trivial) build breakage is still expected related to rare
Kconfig combinations and in-flight patches to various kernel code, but most
of it should be handled by this patch.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, subsys->*attach() callbacks are called for all subsystems
which are attached to the hierarchy on which the migration is taking
place.
With cgroup_migrate_prepare_dst() filtering out identity migrations,
v1 hierarchies can avoid spurious ->*attach() callback invocations
where the source and destination csses are identical; however, this
isn't enough on v2 as only a subset of the attached controllers can be
affected on controller enable/disable.
While spurious ->*attach() invocations aren't critically broken,
they're unnecessary overhead and can lead to temporary overcharges on
certain controllers. Fix it by tracking which subsystems are affected
by a migration and invoking ->*attach() callbacks only on those
subsystems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
cgroup migration is performed in four steps - css_set preloading,
addition of target tasks, actual migration, and clean up. A list
named preloaded_csets is used to track the preloading. This is a bit
too restricted and the code is already depending on the subtlety that
all source css_sets appear before destination ones.
Let's create struct cgroup_mgctx which keeps track of everything
during migration. Currently, it has separate preload lists for source
and destination csets and also embeds cgroup_taskset which is used
during the actual migration. This moves struct cgroup_taskset
definition to cgroup-internal.h.
This patch doesn't cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
kn->priv which is a void * is used as a RCU pointer by cgroup. When
dereferencing it, it was passing kn->priv to rcu_derefreence() without
casting it into a RCU pointer triggering address space mismatch
warning from sparse. Fix them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Acked-by: Zefan Li <lizefan@huawei.com>
Now that the v1 mount code is split into separate functions, move them
to kernel/cgroup/cgroup-v1.c along with the mount option handling
code. As this puts all v1-only kernfs_syscall_ops in cgroup-v1.c,
move cgroup1_kf_syscall_ops to cgroup-v1.c too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Acked-by: Zefan Li <lizefan@huawei.com>
Currently, cgroup_kf_syscall_ops is shared by v1 and v2 and the
specific methods test the version and take different actions. Split
out v1 functions and put them in cgroup1_kf_syscall_ops and remove the
now unnecessary explicit branches in specific methods.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Acked-by: Zefan Li <lizefan@huawei.com>
cgroup.c is getting too unwieldy. Let's move out cgroup v1 specific
code along with the debug controller into kernel/cgroup/cgroup-v1.c.
v2: cgroup_mutex and css_set_lock made available in cgroup-internal.h
regardless of CONFIG_PROVE_RCU.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Acked-by: Zefan Li <lizefan@huawei.com>
