Commit Graph

13 Commits

Author SHA1 Message Date
Boris BREZILLON
80eded6ce8 clk: at91: add slow clks driver
AT91 slow clk is a clk multiplexer.

In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can
choose among 2 sources: an internal RC oscillator circuit and an oscillator
using an external crystal.

In other Socs (sam9260 family) the multiplexer source is hardcoded with
the OSCSEL signal.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07 18:27:45 +02:00
Boris BREZILLON
27cb1c2083 clk: at91: rework main clk implementation
AT91 main clk is a clk multiplexer and not a simple fixed rate clk as
currently implemented.

In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can
choose among 2 sources: an internal RC oscillator circuit and an
oscillator using an external crystal.

In other Socs (sam9260, rm9200 families) the multiplexer source is
hardcoded to the external crystal oscillator.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07 18:27:22 +02:00
Nicolas Ferre
8330148011 ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration option
This AT91 specific Kconfig option removed the code that dealt with
programmable clocks. Each AT91 SoC embeds programmable clocks and
there is little gain to remove this code in case that such a clock
is not used.
If this option is not selected, it causes certain drivers to fail
to build. We simply remove this option instead of adding code just
to build a workaround.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-12 09:57:42 -08:00
Boris BREZILLON
a9c0688fde clk: at91: add PMC smd clock
This patch adds at91 smd (Soft Modem) clock implementation using common clk
framework.

Not used by any driver right now.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:25 +01:00
Boris BREZILLON
c84a61d872 clk: at91: add PMC usb clock
This patch adds new at91 usb clock implementation using common clk framework.
This clock is used to clock usb ports (ohci, ehci and udc).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:25 +01:00
Boris BREZILLON
f090fb37de clk: at91: add PMC utmi clock
This adds new at91 utmi clock implementation using common clk framework.

This clock is a pll with a fixed factor (x40).
It is used as a source for usb clock.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:25 +01:00
Boris BREZILLON
1f22f8bb64 clk: at91: add PMC programmable clocks
This patch adds new at91 programmable clocks implementation using common clk
framework.
A programmable clock is a clock which can be exported on a given pin to clock
external devices.
Each programmable clock is given an id (from 0 to 8).
The number of available programmable clocks depends on the SoC you're using.
Programmable clock driver only implements the clock setting (clock rate and
parent setting). It must be chained to a system clock in order to
enable/disable the generated clock.
The PCKX pins used to output the clock signals must be assigned to the
appropriate peripheral (see atmel's datasheets).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:24 +01:00
Boris BREZILLON
6114067e43 clk: at91: add PMC peripheral clocks
This patch adds new at91 peripheral clock implementation using common clk
framework.

Almost all peripherals provided by at91 SoCs need a clock to work properly.
This clock is enabled/disabled using PCER/PCDR resgisters.

Each peripheral is given an id (see atmel's datasheets) which is used to
define and reference peripheral clocks.

Some new SoCs (at91sam9x5 and sama5d3) provide a new register (PCR) where you
can configure the peripheral clock as a division of the master clock.
This will help reducing the peripherals power comsumption.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:24 +01:00
Boris BREZILLON
5fba62ea26 clk: at91: add PMC system clocks
This patch adds new at91 system clock implementation using common clk
framework.

Some peripherals need to enable a "system" clock in order to work properly.
Each system clock is given an id based on the bit position in SCER/SCDR
registers.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:23 +01:00
Boris BREZILLON
e442d23440 clk: at91: add PMC master clock
This patch adds new at91 master clock implementation using common clk
framework.

The master clock layout describe the MCKR register layout.
There are 2 master clock layouts:
- at91rm9200
- at91sam9x5

Master clocks are given characteristics:
- min/max clock output rate

These characteristics are checked during rate change to avoid
over/underclocking.

These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:23 +01:00
Boris BREZILLON
1a748d2bc5 clk: at91: add PMC pll clocks
This patch adds new at91 pll clock implementation using common clk framework.

The pll clock layout describe the PLLX register layout.
There are four pll clock layouts:
- at91rm9200
- at91sam9g20
- at91sam9g45
- sama5d3

PLL clocks are given characteristics:
- min/max clock source rate
- ranges of valid clock output rates
- values to set in out and icpll fields for each supported output range

These characteristics are checked during rate change to avoid
over/underclocking.

These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:22 +01:00
Boris BREZILLON
38d34c3120 clk: at91: add PMC main clock
This patch adds new at91 main oscillator clock implementation using common
clk framework.

If rate is not provided during clock registration it is calculated using
the slow clock (main clk parent in this case) rate and MCFR register.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:22 +01:00
Boris BREZILLON
0ad6125b15 clk: at91: add PMC base support
This patch adds at91 PMC (Power Management Controller) base support.

All at91 clocks managed by the PMC unit will use this framework.

This framework provides the following fonctionalities:
- define a new struct at91_pmc to hide PMC internals (lock, PMC memory
  mapping, irq domain, ...)
- read/write helper functions (pmc_read/write) to access PMC registers
- lock/unlock helper functions (pmc_lock/unlock) to lock/unlock access to
  pmc registers
- a new irq domain and its associated irq chip to request PMC specific
  interrupts (useful for clk prepare callbacks)

The PMC unit is declared as a dt clk provider (CLK_OF_DECLARE), and every
clk using this framework will declare a table of of_at91_clk_init_cb_t
and add it to the pmc_clk_ids table.

When the pmc dt clock setup function is called (by of_clk_init function),
it triggers the registration of every supported child clk (those matching
the definitions in pmc_clk_ids).

This patch copies at91_pmc_base (memory mapping) and at91sam9_idle
(function) from arch/arm/mach-at91/clock.c (which is not compiled if
COMMON_CLK_AT91 is enabled).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02 15:31:13 +01:00