Add the degamma and gamma lut sizes to gen11 capability
structure.
Note: Currently this doesn't account for the extended range gamma
entries and this will be addressed with new segmented gamma ABI
in a future patch.
v2: Reorder the patch as per Maarten's suggestion.
v3: Rebase
v4: Updated commit message with a note as per Matt's suggestion.
v5: No Change.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-6-git-send-email-uma.shankar@intel.com
Fixed the glk degamma lut programming which currently
was hard coding a linear lut all the time, making degamma
block of glk basically a pass through.
Currently degamma lut for glk is assigned as 0 in platform
configuration. Updated the same to 33 as per the hardware
capability. IGT tests for degamma were getting skipped due to
this, spotted by Swati.
ToDo: The current gamma/degamm lut ABI has just 16bit for each
color component. This is not enough for GLK+, since input
precision is increased to 3.16 which will need 19bit entries.
v2: Added Matt's RB.
v3: Changed uint32_t to u32.
v4: Fixed Maarten's review comment
Credits-to: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-2-git-send-email-uma.shankar@intel.com
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcXJw7AAoJEPpiX2QO6xPKWuQH/i3o86TqLheae2vdi8X/yp92
XeZbmNfaL7Gui6ggZpRMREjIIiDZ0nFga5INcVtrak6JRjeefb+wQsy38tdb98ne
EPn6eif0nO/uxc7BsdW2ndIDBSWC+ZW7gt4rzY5zLG/WCmX1qfOOS9GdUpXPF3jY
sB8Af6lsGSxrCFkBzUB9Z7AyoP/Yq+YeamFOtXLufhtQb4GL3djjdugaUBBfQmNn
FvZTxhhsXn3HU9Jy1AjRFALhqXvTjZt1L5myav4sCJ2qlsr2dL9y3c7evbO5jrZY
4TSlKUi5XwfW1RlHTQN43fTq7yWFwoF1FsR4LaKS0a8bKIXiBLwset7YA1m6wmY=
=Woo8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208165000.GA30314@intel.com
First of all GMCH can be considered a feature by itself
since it is a chip present in some platforms that connects
the IA processor to memory and other components in PC.
Also with the introduction of display block at device info,
we got a redundant definition:
.display.has_gmch_display = 1,
So, let's clean up things a bit and use the standardized
way of has_feature on displays side.
No functional change and no manual interaction to generate
this patch.
It is only:
sed -si -e 's/has_gmch_display/has_gmch/g' \
-e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h}
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com
Wrap the active tracking for a GPU references in a slabcache for faster
allocations, and hopefully better fragmentation reduction.
v3: Nothing device specific left, it's just a slabcache that we can
make global.
v4: Include i915_active.h and don't put the initfunc under DEBUG_GEM
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-4-chris@chris-wilson.co.uk
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcVVKOAAoJEPpiX2QO6xPKzpEH/11faCaucfkejXnR2ff3H/Rc
EQILDB+SFwzKYaxd8pLHXJ7D8stmBGW4i086bic1JFTxIi/MtQv5rfOO87jqu1DU
3FFgCLuovzmheKVMuPxnSwGXn2ZI3RWPoDrH7OGaOtKuNAfoFTL9upZYsmBOyA+8
srraU1zHhhR3pawqqVpGrXCVToKSYQc/mh9Od1v491yoqMEhC6r2JaGiePZQldn9
J99ouBDOHMM1f45UX4+ORNQB951sQhJ4SW8e2bi2jKuc5WNmX3+tGLYdKemq3OYN
vi3a4xwSPkhbGWUSQtT7Cy6e2p43p/k7CwVl1iEESVB7HOqINwmxY/UIxm3ap1s=
=Q8JK
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Make background color and LUT more robust (Matt)
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202082911.GA6615@intel.com
While cross checking PCI IDs from Intel Media SDK
and kernel Dmitry noticed this gap. So we checked the
spec and this new ID had been recently added.
v2: Adding new H_GT1 entry to i915_pci.c (Jose)
Reported-by: Dmitry Rogozhkin<dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Rogozhkin<dmitry.v.rogozhkin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201235049.27206-1-rodrigo.vivi@intel.com
Use of the new DRM_COLOR_LUT_NON_DECREASING test was a bit over-zealous;
it doesn't actually need to be applied to the degamma on "bdw-style"
platforms. Likewise, we overlooked the fact that CHV should have that
test applied to the gamma LUT as well as the degamma LUT.
Rather than adding more complicated platform checking to
intel_color_check(), let's just store the appropriate set of LUT
validation flags for each platform in the intel_device_info structure.
v2:
- Shuffle around LUT size tests so that the hardware-specific tests
won't be applied to legacy gamma tables. (Ville)
- Add a debug message so that it will be easier to understand why an
atomic transaction involving incorrectly-sized LUT's got rejected
by the driver.
v3:
- Switch size_t's to int's. (Ville)
Fixes: 85e2d61e49 ("drm/i915: Validate userspace-provided color management LUT's (v4)")
References: https://lists.freedesktop.org/archives/intel-gfx/2019-January/187634.html
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130181022.4291-1-matthew.d.roper@intel.com
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
When we first introduced the reset to sanitize the GPU on taking over
from the BIOS and before returning control to third parties (the BIOS!),
we restricted it to only systems utilizing HW contexts as we were
uncertain of how stable our reset mechanism truly was. We now have
reasonable coverage across all machines that expose a GPU reset method,
and so we should be safe to sanitize the GPU state everywhere.
v2: We _have_ to skip the reset if it would clobber the display.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103112104.19561-1-chris@chris-wilson.co.uk
It is only initialized to zero once so does not need an explicit
initializer.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181231122212.1667-1-jani.nikula@intel.com
This helps separate what capabilities are display capabilities.
v3: Moving display struct right after flags (Lucas)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-2-jose.souza@intel.com
Depending on the transcoder enum values to translate from transcoder
to pipe/transcoder register addresses can easily break if we add a new
transcoder. So remove the dependency by using named initializers.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120092325.21249-1-imre.deak@intel.com
While removing .palette_offsets, I removed the commas after
.trans_offsets in the macros, but failed to remove the line continuation
backslashes.
While at it, also remove another extra comma to be in line with the
other related macros.
Fixes: 74c1e82642 ("drm/i915: remove palette_offsets from device info in favor of _PICK()")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114112130.22264-1-jani.nikula@intel.com
This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.
v2: Add blank line before comment
v3 by Jani:
- Move DSI specific .pipe_offsets to GEN11_FEATURES
- Macro placement and comment juggling
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2
registers and their bitfields for DSI. These registers are used
for enabling port sync mode, input pipe select, data lane width
configuration etc.
v2: Changes:
- Remove redundant extra line
- Correct some of bitfield definition
v3 by Jani:
- Move DSI transcoder offsets to GEN11_FEATURES
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com
This new AML PCI ID uses the same gen graphics as Coffe Lake not a
Kaby Lake one like the other AMLs.
So to make it more explicit renaming INTEL_AML_GT2_IDS to
INTEL_AML_KBL_GT2_IDS and naming this id as INTEL_AML_CFL_GT2_IDS.
v2:
- missed add new AML macro to INTEL_CFL_IDS()
- added derivated platform initials to AML macros
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927010650.22731-1-jose.souza@intel.com
Now that we are confident in providing full-ppgtt where supported,
remove the ability to override the context isolation.
v2: Remove faked aliasing-ppgtt for testing as it no longer is accepted.
v3: s/USES/HAS/ to match usage and reject attempts to load the module on
old GVT-g setups that do not provide support for full-ppgtt.
v4: Insulate ABI ppGTT values from our internal enum (later plans
involve moving ppGTT depth out of the enum, thus potentially breaking
ABI unless we document the current values).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926201222.5643-1-chris@chris-wilson.co.uk
SKL has IPC but it should not be set according to the WA, so lets
just mark as it don't have it to simply the code and avoid
unnecessary MMIO writes at every call to intel_enable_ipc().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918204714.27306-4-jose.souza@intel.com
Let us reuse the already defined has_csr check and not
redefine it.
The main difference is that in effect this will flip .has_csr to 1
(via GEN9_FEATURES which GEN11_FEATURES pulls in).
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=107382
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1534527210-16841-1-git-send-email-anusha.srivatsa@intel.com
After disabling resource streamer on ICL (due to it actually not
existing there), I got feedback that there have been some experimental
patches for mesa to use RS years ago, but nothing ever landed or shipped
because there was no performance improvement.
This removes it from kernel keeping the uapi defines around for
compatibility.
v2: - re-add the inadvertent removal of CTX_CTRL_INHIBIT_SYN_CTX_SWITCH
- don't bother trying to document removed params on uapi header:
applications should know that from the query.
(from Chris)
v3: - disable CTX_CTRL_RS_CTX_ENABLE istead of removing it
- reword commit message after Daniele confirmed no performance
regression on his machine
- reword commit message to make clear RS is being removed due to
never been used
v4: - move I915_EXEC_RESOURCE_STREAMER to __I915_EXEC_ILLEGAL_FLAGS so
the check on ioctl() is made much earlier by
i915_gem_check_execbuffer() (suggested by Tvrtko)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803232443.17193-1-lucas.demarchi@intel.com
Not all chipsets have an internal buffer delaying the visibility of
writes via the GGTT being visible by other physical paths, but we use a
very heavy workaround for all. We only need to apply that workarounds to
the chipsets we know suffer from the delay and the resulting coherency
issue.
Similarly, the same inconsistent coherency fouls up our ABI promise that
a write into a mmap_gtt is immediately visible to others. Since the HW
has made that a lie, let userspace know when that contract is broken.
(Not that userspace would want to use mmap_gtt on those chipsets for
other performance reasons...)
Testcase: igt/drv_selftest/live_coherency
Testcase: igt/gem_mmap_gtt/coherency
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100587
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720101910.11153-1-chris@chris-wilson.co.uk
On an aborted module load, we unwind and free our device private - but
we left a dangling pointer to our privates inside the pci_device. After
the attempted aborted unload, we may still get a call to i915_pci_remove()
when the module is removed, potentially chasing stale data.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-5-chris@chris-wilson.co.uk
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
So, let's just move it to AML macro that will feed into KBL macro
just to keep it better organized to make easier future code review
but it will be handled as a KBL.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-2-jose.souza@intel.com
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
So, let's just move them to WHL macros that will feed into CFL macro
just to keep it better organized to make easier future code review
but it will be handled as a CFL.
v2:
Fixing GT level of some ids
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-1-jose.souza@intel.com
PSR hardware and hence the driver code for VLV and CHV deviates a lot from
their DDI counterparts. While the feature has been disabled for a long time
now, retaining support for these platforms is a maintenance burden. There
have been multiple refactoring commits to just keep the existing code for
these platforms in line with the rest. There are known issues that need to
be fixed to enable PSR on these platforms, and there is no PSR capable
platform in CI to ensure the code does not break again if we get around to
fixing the existing issues. On account of all these reasons, let's nuke
this code for now and bring it back if a need arises in the future.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511230059.19387-1-dhinakaran.pandiyan@intel.com
Icelake 11 has one vebox and two vdboxes (0 and 2).
Bspec: 21140
v2: Split out in two (Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316121456.11577-2-mika.kuoppala@linux.intel.com
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Enhanced Execlists is an upgraded version of execlists which supports
up to 8 ports. The lrcs to be submitted are written to a submit queue
(the ExecLists Submission Queue - ELSQ), which is then loaded on the
HW. When writing to the ELSP register, the lrcs are written cyclically
in the queue from position 0 to position 7. Alternatively, it is
possible to write directly in the individual positions of the queue
using the ELSQC registers. To be able to re-use all the existing code
we're using the latter method and we're currently limiting ourself to
only using 2 elements.
v2: Rebase.
v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio).
v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio)
v5: Reword commit, rename regs to be closer to specs, turn off
preemption (Daniele), reuse engine->execlists.elsp (Chris)
v6: use has_logical_ring_elsq to differentiate the new paths
v7: add preemption support, rename els to submit_reg (Chris)
v8: save the ctrl register inside the execlists struct, drop CSB
handling updates (superseded by preempt_complete_status) (Chris)
v9: s/drm_i915_gem_request/i915_request (Mika)
v10: resolved conflict in inject_preempt_context (Mika)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
This is the current PCI ID list in our documentation.
Let's leave the _gt#_ part out for now since our current documentation
is not 100% clear and we don't need this info now anyway.
v2: Use the new ICL_11 naming (Kelvin Gardiner).
v3: Latest IDs as per BSpec (Oscar).
v4: Make it compile (Paulo).
v5: Remove comments (Lucas).
v6: Multile rebases (Paulo).
v7: Rebase (Mika)
Reviewed-by: Anuj Phogat <anuj.phogat@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220153755.13509-1-mika.kuoppala@linux.intel.com
Rather than deriving the platform_mask from the
intel_device_static_info->platform at runtime, pre-fill it in the static
data.
v2: Undefine macros at end of their scope
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215081930.11477-3-chris@chris-wilson.co.uk
We now have a stable cnl on our CI and it seems mostly
green without big risks of blank screen or anything
blowing up on linux installations in the future.
As a reminder i915.alpha_support was created to protect
future linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.
Specifically, alpha support says nothing about the development
state of the hardware, and everything about the state of the
driver in a kernel release.
This is semantically no different from the old
preliminary_hw_support flag, but the old one was all too often
interpreted as (preliminary hw) support instead of the intended
(preliminary) hw support, and it was misleading for everyone.
Hence the rename.
v2: Fix the typos and include more history about the parameter
rename on commit message. (Jani)
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-cnl-y3.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214204205.4446-1-rodrigo.vivi@intel.com
The only difference is that this SKUs has the full
Port A/E split named as Port F.
But since SKUs differences don't matter on the platform
definition group and ids, let's merge all off them together.
v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c
v7: Remove GT reference since it doesn't matter here (Paulo)
Also move IS_CNL_WITH_PORT_F macro to this patch to
make it easier for review this part and also to get
used sooner.
v8: Rebased on top of commit 5db47e37b3 ("Revert "drm/i915:
mark all device info struct with __initconst"")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-1-rodrigo.vivi@intel.com
Icelake is an Intel® Processor containing an Intel® Graphics
Controller.
This is just an initial Icelake definition. PCI IDs, Icelake support
and new features coming in following patches.
v2: Add .ddb_size and .has_guc (Michal Wajdeczko).
v3: Add the ICL_FEATURES macro (Kelvin Gardiner).
v4 (from Paulo): Add missing __initconst (Paulo) and say "graphics
controller" instead of something that looks like an official marketing
name but isn't (Chris).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-3-paulo.r.zanoni@intel.com
It has been many years since the last confirmed sighting (and fix) of an
RC6 related bug (usually a system hang). Remove the parameter to stop
users from setting dangerous values, as they often set it during triage
and end up disabling the entire runtime pm instead (the option is not a
fine scalpel!).
Furthermore, it allows users to set known dangerous values which were
intended for testing and not for production use. For testing, we can
always patch in the required setting without having to expose ourselves
to random abuse.
v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the
lack of ilk support better.
v3: Clear intel_info->rc6p if we don't support rc6 itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
They're unused and unsupported. Leave the reduced_clock pointers in
place still, should they prove useful later on.
v2: go from nuking DDI lowfreq_avail to nuking it entirely (Ville)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017140234.20677-1-jani.nikula@intel.com
Replace instances of drm_framebuffer_reference/unreference() with
*_get/put() suffixes and drm_dev_unref with *_put() suffix
because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
Done with following coccinelle semantic patch
@@
expression ex;
@@
(
-drm_framebuffer_unreference(ex);
+drm_framebuffer_put(ex);
|
-drm_dev_unref(ex);
+drm_dev_put(ex);
|
-drm_framebuffer_reference(ex);
+drm_framebuffer_get(ex);
)
Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014183644.21990-1-harshasharmaiitr@gmail.com
In preparation for huge gtt pages expose page_sizes as part of the
device info, to indicate the page sizes supported by the HW. Currently
only 4K is supported.
v2: s/page_size_mask/page_sizes/
v3: introduce I915_GTT_MAX_PAGE_SIZE
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-5-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-4-chris@chris-wilson.co.uk
When we write to ELSP, it triggers a context preemption at the earliest
arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other
operations and the explicit MI_ARB_CHECK). If this is to the same
context, it triggers a LITE_RESTORE where the RING_TAIL is merely
updated (used currently to chain requests from the same context
together, avoiding bubbles). However, if it is to a different context, a
full context-switch is performed and it will start to execute the new
context saving the image of the old for later execution.
Previously we avoided preemption by only submitting a new context when
the old was idle. But now we wish embrace it, and if the new request has
a higher priority than the currently executing request, we write to the
ELSP regardless, thus triggering preemption, but we tell the GPU to
switch to our special preemption context (not the target). In the
context-switch interrupt handler, we know that the previous contexts
have finished execution and so can unwind all the incomplete requests
and compute the new highest priority request to execute.
It would be feasible to avoid the switch-to-idle intermediate by
programming the ELSP with the target context. The difficulty is in
tracking which request that should be whilst maintaining the dependency
change, the error comes in with coalesced requests. As we only track the
most recent request and its priority, we may run into the issue of being
tricked in preempting a high priority request that was followed by a
low priority request from the same context (e.g. for PI); worse still
that earlier request may be our own dependency and the order then broken
by preemption. By injecting the switch-to-idle and then recomputing the
priority queue, we avoid the issue with tracking in-flight coalesced
requests. Having tried the preempt-to-busy approach, and failed to find
a way around the coalesced priority issue, Michal's original proposal to
inject an idle context (based on handling GuC preemption) succeeds.
The current heuristic for deciding when to preempt are only if the new
request is of higher priority, and has the privileged priority of
greater than 0. Note that the scheduler remains unfair!
v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU.
Since, the feature is now conditional and not always available when we
have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a
capability mask).
v3: Stylistic tweaks.
v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of
the preempt vs preempting debate.
Suggested-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk
Let's organize this in a way that it gets more obvious
when looking to the platform colors and in a easier
way to get inherited.
v2: Add comma at the end (Jani), when possible.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-3-rodrigo.vivi@intel.com
As Chris noticed the current organization is confusing
and inheritance is not clear.
So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM
where new GEN inherit features from previous gens and
Platforms only use gen features plus what ever is specific
for that platform and shouldn't be passed on.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-2-rodrigo.vivi@intel.com
According to Spec for SKL+: "Isochronous Priority Control.
If enabled, Display sends demoted requests once the transition
watermark is reached. If transition watermark is not enabled,
Display sends demoted requests when the display buffer is full."
The commit 'e57f1c02155f ("drm/i915/gen9+: Add has_ipc flag in
device info structure")' introduced that as gen9+ but missing many
SKL Skus.
I believe the reason for that is Spec also mentions workarounds for
SKL-ALL: "IPC (Isoch Priority Control) may cause underflows
WA: Do not enable IPC in register ARB_CTL2"
It seems lame to add the feature and forever disable it,
but it will avoid a mistake of enabling it when we are reorganizing
the feature definitions on i915_pci.c later.
It will also allow us to probably extend that workaround for
other platforms.
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-1-rodrigo.vivi@intel.com
While testing Jim Bride's latest batch of PSR patches I noticed
that gen9lp doesn't include the has_psr flag, and that our GLK
system thus reported PSR as unsupported.
This patch simply adds has_psr.
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808100952.26448-1-david.weinehall@linux.intel.com
Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.
v5: pure rename
v6: fix
Credits-to: Coccinelle
@@
identifier n;
@@
(
- i915.n
+ i915_modparams.n
)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
We now have Coffee Lake on our CI systems.
Coffee Lake is at this point in same stage as Kaby Lake.
And it seems that we don't have any risk of bad blank
screens or anything like that. So let's remove the protection.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230632.25650-1-rodrigo.vivi@intel.com
Now that we're not using MSI anymore on gen4 we can start
using GMBUS and AUX interrupts again. These were disabled on
account of them causing the hardware to somehow generate
legacy interrupts even when MSI was enabled.
See commit c12aba5aa0 ("drm/i915: stop using GMBUS IRQs on Gen4
chips") and commit 4e6b788c3f ("drm/i915: Disable dp aux irq on
g4x") for more details.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-17-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
New Isochronous Priority Control (IPC) capability is introduced in newer
GEN platforms. This patch adds a device info flag to indicate if platform
supports IPC. Patch also sets this flag in supported platforms.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817134529.2839-7-mahesh1.kumar@intel.com
The original gen4 has an issue where writes (both render and blt) into
snoopable pages are lost. We've previously worked around this in
userspace (ddx, igt) by simply not requesting snoopable buffers, but upon
rediscovering this problem for a third time, make the kernel reject such
requests with -ENODEV.
This disables snooping on userspace buffers for i965g and i965gm (original
gen4) machines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906192424.26970-1-chris@chris-wilson.co.uk
Currently we define any !llc machine as using snoop instead. However,
some platforms run into trouble using snoop that we would like to
disable, and to do so easily we want to be able to use the static
device_info tables.
v2: Leave the old snoop = !llc as a warning for the time being to check
that all stanzas are filled as either llc or snoop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906105653.3665-1-chris@chris-wilson.co.uk
Up to Coffeelake we could deduce this GT number from the device ID.
This doesn't seem to be the case anymore. This change reorders pciids
per GT and adds a gt field to intel_device_info. We set this field on
the following platforms :
- SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL
Before & After :
$ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l
209
v2: Add SNB & IVB (Chris)
v3: Fix compilation error in early-quirks (Lionel)
v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-2-lionel.g.landwerlin@intel.com
The corruption in CSB mmio reads we were seeing has been tracked down to
incorrectly touching forcewake of all domains, following an engine reset.
It is still a mistery why we only catched this in Broxton, since it
could happen in any platform.
With that fix already merged, commit 4055dc75d6 ("drm/i915: Stop
touching forcewake following a gen6+ engine reset"), lets try to enable
per-engine resets in Broxton one more time.
This reverts commit f188258bde0f ("drm/i915: Disable per-engine reset for
Broxton").
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818172342.7282-1-michel.thierry@intel.com
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cannonlake has same color setup as Geminilake.
Legacy color load luts doesn't work anymore on Cannonlake+.
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499374873-2454-1-git-send-email-rodrigo.vivi@intel.com
This is a preparatory patch which modifies error handler to do per engine
hang recovery. The actual patch which implements this sequence follows
later in the series. The aim is to prepare existing recovery function to
adapt to this new function where applicable (which fails at this point
because core implementation is lacking) and continue recovery using legacy
full gpu reset.
A helper function is also added to query the availability of engine
reset. A subsequent patch will add the capability to query which type
of reset is present (engine -> full -> no-reset) via the get-param
ioctl.
It has been decided that the error events that are used to notify user of
reset will only be sent in case if full chip reset. In case of just
single (or multiple) engine resets, userspace won't be notified by these
events.
Note that this implementation of engine reset is for i915 directly
submitting to the ELSP, where the driver manages the hang detection,
recovery and resubmission. With GuC submission these tasks are shared
between driver and firmware; i915 will still responsible for detecting a
hang, and when it does it will have to request GuC to reset that Engine and
remind the firmware about the outstanding submissions. This will be
added in different patch.
v2: rebase, advertise engine reset availability in platform definition,
add note about GuC submission.
v3: s/*engine_reset*/*reset_engine*/. (Chris)
Handle reset as 2 level resets, by first going to engine only and fall
backing to full/chip reset as needed, i.e. reset_engine will need the
struct_mutex.
v4: Pass the engine mask to i915_reset. (Chris)
v5: Rebase, update selftests.
v6: Rebase, prepare for mutex-less reset engine.
v7: Pass reset_engine mask as a function parameter, and iterate over the
engine mask for reset_engine. (Chris)
v8: Use i915.reset >=2 in has_reset_engine; remove redundant reset
logging; add a reset-engine-in-progress flag to prevent concurrent
resets, and avoid dual purposing of reset-backoff. (Chris)
v9: Support reset of different engines in parallel (Chris)
v10: Handle reset-engine flag locking better (Chris)
v11: Squash in reporting of per-engine-reset availability.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ian Lister <ian.lister@intel.com>
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615201828.23144-4-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620095751.13127-5-chris@chris-wilson.co.uk
Coffee Lake is a Intel® Processor containing Intel® HD Graphics
following Kabylake.
It is Gen9 graphics based platform on top of CNP PCH.
Let's start by adding the platform definition based on previous
platforms but yet as preliminary_hw_support.
On following patches we will start adding PCI IDs and the
platform specific changes.
v2: Also add BS2 ring that is present on GT3. As on KBL, according
spec: "GT3 also has additional media blocks with second instance
of VEBox and VDBox each", i.e. BSD2 ring in our case. Noticed
when reviewing PCI ID patches.
v3: CFL_PLATFORM instead for CFL_FEATURES because it contains
Platform information and no new features when compared to
BDW_FEATURES definition.
v4: Rebased on top of Cannonlake patches.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496937000-8450-1-git-send-email-rodrigo.vivi@intel.com
This patch clean up a bit the platform definition block in
a way to avoid duplications and to let clear that GT3 for
the current platform only have the extra Media engine (BSD2).
v2: Kabylake IS_KABYLAKE as Anusha noticed.
v3: Avoid EXTRA_ENGINE_MASK and list rings out on GT3 to
make it more clear.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496765166-7068-1-git-send-email-rodrigo.vivi@intel.com
Platform enabling and its power-on are organized in different
skus (U x Y x S x H, etc). So instead of organizing it in
GT1 x GT2 x GT3 let's also use the platform sku.
This is also the new Spec style what makes the review much
more easy and straightforward.
v2: Really include the PCI IDs to the picidlist[];
v3: Remove PCI IDs not present in spec.
v4: Rebase.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-3-git-send-email-rodrigo.vivi@intel.com
Cannonlake is a Intel® Processor containing Intel® HD Graphics
following Kabylake.
It is Gen10.
Let's start by adding the platform definition based on previous
platforms but yet as alpha_support.
On following patches we will start adding PCI IDs and the
platform specific changes.
CNL has an increased DDB size as Damien had previously
noticed and provided a separated patch that got squashed here.
v2: Squash DDB size here per Ander request.
Credits-to: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496781040-20888-1-git-send-email-rodrigo.vivi@intel.com
The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.
Fixes: 85ee17ebee ("drm/i915/bxt: Broxton decoupled MMIO")
Cc: Zhe Wang <zhe1.wang@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
HAS_HW_CONTEXTS is misleading condition for GPU reset and CCID,
replace it with Gen specific (to be updated in next patches).
HAS_HW_CONTEXTS in i915_l3_write is bogus because each HAS_L3_DPF
match also has .has_hw_contexts = 1 set.
This leads to us being able to get rid of the property completely.
v2:
- Keep the checks at Gen6 for no functional change (Ville)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Old devices have quite severe restrictions for using fences, and unlike
more recent device (anything from Pineview onwards) we need to enforce
those restrictions even for unfenced tiled access from the render
pipeline.
Fixes: 944397f04f ("drm/i915: Store required fence size/alignment for GGTT vma")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170325113243.16438-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Some pieces of code are independent of hardware but are very tricky to
exercise through the normal userspace ABI or via debugfs hooks. Being
able to create mock unit tests and execute them through CI is vital.
Start by adding a central point where we can execute unit tests and
a parameter to enable them. This is disabled by default as the
expectation is that these tests will occasionally explode.
To facilitate integration with igt, any parameter beginning with
i915.igt__ is interpreted as a subtest executable independently via
igt/drv_selftest.
Two classes of selftests are recognised: mock unit tests and integration
tests. Mock unit tests are run as soon as the module is loaded, before
the device is probed. At that point there is no driver instantiated and
all hw interactions must be "mocked". This is very useful for writing
universal tests to exercise code not typically run on a broad range of
architectures. Alternatively, you can hook into the live selftests and
run when the device has been instantiated - hw interactions are real.
v2: Add a macro for compiling conditional code for mock objects inside
real objects.
v3: Differentiate between mock unit tests and late integration test.
v4: List the tests in natural order, use igt to sort after modparam.
v5: s/late/live/
v6: s/unsigned long/unsigned int/
v7: Use igt_ prefixes for long helpers.
v8: Deobfuscate macros overriding functions, stop using -I$(src)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213171558.20942-1-chris@chris-wilson.co.uk
The gamma tables in Geminilake were changed. There is no split-gamma
mode. Instead, there is a dedicated degamma table that is enabled
whenever pipe CSC is enabled.
The dedicated gamma table has 16 bit precision but doesn't support
separate channels. Since that doesn't match the per-channel format of
the degamma LUT property, for now only a linear table is loaded and the
property ignored.
v2: Remove empty line. (Ville)
Reuse broadwell code. (Ville)
v3: Don't write PIPE_CSC_MODE. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170127090230.20302-1-ander.conselvan.de.oliveira@intel.com
Back in 2014, commit fb7023e0e2 ("drm/i915: BDW: Adding Reserved PCI
IDs.") added the reserved PCI IDs in order to try to make sure we had
working drivers in case we ever released products using these IDs
(since we had instances of this type of problem in the past). The
problem is that the patch only touched the macros used by
early-quirks.c and by the user space components that rely on
i915_pciids.h, it didn't touch the macros used by i915_pci.c. So we
correctly handled the stolen memory for these theoretical IDs, but we
didn't actually drive the devices from i915.ko.
So this patch fixes the original commit by actually making i915.ko
drive these IDs, which was the goal. There's no information on what
would be the GT count on these IDs, so we just go with the safer
intel_broadwell_info, at the risk of ignoring a possibly inexistent
BSD2_RING.
I did some checking, and it seems that these IDs are driven by
intel-gpu-tools, xf86-video-intel and libdrm (since they contain old
copies of i915_pciids.h), but they are not checked by mesa.
The alternative to this patch would be to just assume we're actually
never going to use these IDs, and then remove them from our ID lists
and make sure our user space components sync the latest i915_pciids.h
copy. I'm fine with either approaches, as long as we make sure that
every component tries to drive the same list of PCI IDs.
Fixes: fb7023e0e2 ("drm/i915: BDW: Adding Reserved PCI IDs.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-3-git-send-email-paulo.r.zanoni@intel.com
This macro got useless after commit 8d9c20e1d1
"drm/i915: Remove .is_mobile field from platform struct"
that removed is_mobile split from VLV definition.
Also this was never reused on any following platform.
So let's clean up a bit here.
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482184508-18346-1-git-send-email-rodrigo.vivi@intel.com
Valleyview/Baytrail (gen7_lp) and Cherryview/Braswell (gen8_lp)
are both Atom platforms like Broxton/Apollolake and Geminilake.
So let's expand this is_lp back to these platforms and
create the IS_LP(dev_priv) so we can start simplifying a bit
our if/else for platform lists.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482096988-400-1-git-send-email-rodrigo.vivi@intel.com
Pineview deserves to use its own platform enum (which was already added,
unused, previously). IS_G33() no longer matches Pineview, and gets
replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no
longer an outlier among platform definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481143689-19672-1-git-send-email-jani.nikula@intel.com
The platform flags in device info are (mostly) mutually
exclusive. Replace the flags with an enum. Add the platform enum also
for platforms that previously didn't have a flag, and give them codename
logging in dmesg.
Pineview remains an exception, the platform being G33 for that.
v2: Sort enum by gen and date
v3: rebase on geminilake enabling
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480596595-3278-1-git-send-email-jani.nikula@intel.com
Instead of being hidden in sanitize_enable_ppgtt.
It also seems to be the place to do so nowadays.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Broxton and Geminilake are both gen9lp platforms. To avoid adding
IS_GEMINILAKE() checks everywhere alongside the IS_BROXTON() ones, add a
IS_GEN9_LP() macro.
v2: Rename macro parameter to dev_priv. (Joonas)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Geminilake is an Intel® Processor containing Intel® HD Graphics
following Broxton.
Let's start by adding the platform definition. PCI IDs and plaform
specific code will follow.
v2: Rebase (don't allow dev to be used with the new macro).
v3: Update ddb size. (Matt)
Rebase on s/preliminary_hw/alpha/
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479133526-32389-1-git-send-email-ander.conselvan.de.oliveira@intel.com
The following LP platform inherits a lot of this platform
So let's simplify here to re-use this later.
v2: Keep ddb_size out of the new macro.
v3: Rebase (has_decoupled_mmio). (Imre)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480584796-19466-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Decoupled MMIO is an alternative way to access forcewake domain
registers, which requires less cycles for a single read/write and
avoids frequent software forcewake.
This certainly gives advantage over the forcewake as this new
mechanism “decouples” CPU cycles and allow them to complete even
when GT is in a CPD (frequency change) or C6 state.
This can co-exist with forcewake and we will continue to use forcewake
as appropriate. E.g. 64-bit register writes to avoid writing 2 dwords
separately and land into funny situations.
v2:
- Moved platform check out of the function and got rid of duplicate
functions to find out decoupled power domain (Chris)
- Added a check for forcewake already held and skipped decoupled
access (Chris)
- Skipped writing 64 bit registers through decoupled MMIO (Chris)
v3:
- Improved commit message with more info on decoupled mmio (Tvrtko)
- Changed decoupled operation to enum and used u32 instead of
uint_32 data type for register offset (Tvrtko)
- Moved HAS_DECOUPLED_MMIO to device info (Tvrtko)
- Added lookup table for converting fw_engine to pd_engine (Tvrtko)
- Improved __gen9_decoupled_read and __gen9_decoupled_write
routines (Tvrtko)
v4:
- Fixed alignment and variable names (Chris)
- Write GEN9_DECOUPLED_REG0_DW1 register in just one go (Zhe Wang)
v5:
- Changed HAS_DECOUPLED_MMIO() argument name to dev_priv (Tvrtko)
- Sanitize info->had_decoupled_mmio at init (Chris)
Signed-off-by: Zhe Wang <zhe1.wang@intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479230360-22395-1-git-send-email-praveen.paneri@intel.com
The term "preliminary hardware support" has always caused confusion both
among users and developers. It has always been about preliminary driver
support for new hardware, and not so much about preliminary hardware. Of
course, initially both the software and hardware are in early stages,
but the distinction becomes more clear when the user picks up production
hardware and an older kernel to go with it, with just the early support
we had for the hardware at the time the kernel was released. The user
has to specifically enable the alpha quality *driver* support for the
hardware in that specific kernel version.
Rename preliminary_hw_support to alpha_support to emphasize that the
module parameter, config option, and flag are about software, not about
hardware. Improve the language in help texts and debug logging as well.
This appears to be a good time to do the change, as there are currently
no platforms with preliminary^W alpha support.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
Move has_64bit_reloc into dev_priv->info. This will make it visible
in the feature listing debug output.
v2:
- Keep the struct member to keep GCC fragile but happy (Chris)
v3:
- More detailed commit message (Chris)
- Include forgotten CHV and BXT (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478162386-5018-1-git-send-email-joonas.lahtinen@linux.intel.com
Fix sparse warnings:
drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol
'i915_driver_load' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol
'i915_driver_unload' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops'
was not declared. Should it be static?
Fixes: 42f5551d27 ("drm/i915: Split out the PCI driver interface to i915_pci.c")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com
Adding the ddb size into the devide info will avoid
platform checks while computing wm.
v2: Added comment and WARN_ON if ddb size is zero.(Jani)
v3: Added WARN_ON at the right place.(Jani)
Suggested-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Deepak M <m.deepak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473931870-7724-1-git-send-email-m.deepak@intel.com
Moving all GPU features to the platform definition allows for
- standard place when adding new features from new platform
- possible to see supported features when dumping struct
definitions
Signed-off-by: Carlos Santa <carlos.santa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
