Vivi is not that important to appear at the main menu, so move it
to its own submenu. Also, the mem2mem test device driver is
similar to vivi. So, put both at the same menu.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
That helps to better organize the soc_camera items.
While here, cleanup Makefiles, removing uneeded include dirs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
make[4]: *** No rule to make target `drivers/media/platform/sh_mobile_csi2.c',
needed by `drivers/media/platform/sh_mobile_csi2.o'. Stop.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On a few places, := were using instead of +=, causing drivers to
not compile.
While here, standardize the usage of += on all cases where multiple
lines are needed, and for obj-y/obj-m targets, and := when just one
line is needed, on <module>-obj rules.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Identified-by: Antti Polosaari <crope@iki.fi>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In JPEG mode, the size of image is variable due to different JPEG compression
rate. We only can get the pix->sizeimage from the user.
If we clear pix->sizeimage in soc_camera_try_fmt() then we will get it from:
ret = soc_mbus_image_size(xlate->host_fmt, pix->bytesperline,
pix->height);
if (ret < 0)
return ret;
pix->sizeimage = max_t(u32, pix->sizeimage, ret);
In general, this sizeimage will be larger than the actul JPEG image size.
But vb2 will check the buffer and size of image in __qbuf_userptr():
/* Check if the provided plane buffer is large enough */
if (planes[plane].length < q->plane_sizes[plane])
So we shouldn't clear the pix->sizeimage and also shouldn't re-calculate
the pix->sizeimage in soc_mbus_image_size() in JPEG mode
We also shouldn't re-calculate pix->bytesperline:
ret = soc_mbus_bytes_per_line(pix->width, xlate->host_fmt);
if (ret < 0)
return ret;
pix->bytesperline = max_t(u32, pix->bytesperline, ret);
pix->bytesperline also should be set by the user or by the driver's
try_fmt() implementation.
Change-Id: I700690a2287346127a624b5260922eaa5427a596
Signed-off-by: Albert Wang <twang13@marvell.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch contains code change only to use the present macro-
MX3_CAMERA_DATAWIDTH_MASK to check valid camera platform data
bus width instead of enumerating every possible data bus width.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On i.MX27 two clocks are required: emma-ipg and emma-ahb. The ahb clock
has to be requested using both a device and a connection ID.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
[g.liakhovetski@gmx.de: rebase to the current media tree]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch checks the state of the buffer when calling .buf_init() method.
This is needed for the USERPTR buffer type, because in that case
.buf_init() is called every time a buffer is queued, and not only once
during the preparation stage, like in the MMAP case. Without this check
buffers get initialised repeatedly, which also leads to the allocation
of new DMA descriptors, of which there is only a final relatively small
number available. Both MMAP and USERPTR methods were successfully tested.
Signed-off-by: Alex Gershgorin <alexg@meprolight.com>
[g.liakhovetski@gmx.de: remove mx3_camera_buffer::state completely]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The commit 98d7bbb9 changed *of_device_id.data to const
which introduced warnings in various places that have mostly
been fixed. This patch fixes one such warning by introducing
two const qualifiers.
GCC warning:
drivers/media/platform/coda.c:1785:16: warning:
assignment discards ‘const’ qualifier
from pointer target type [enabled by default]
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
devm_regulator_get() is a device managed function and makes the exit code
a bit simpler and cleaner.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Using devm_kzalloc simplifies the code and ensures that the use of
devm_request_irq is safe. When kzalloc and kfree were used, the interrupt
could be triggered after the handler's data argument had been freed.
This also introduces some missing initializations of the return variable
ret, and uses devm_request_and_ioremap instead of the combination of
devm_request_mem_region and devm_ioremap.
The problem of a free after a devm_request_irq was found using the
following semantic match (http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
expression e1,e2,x,a,b,c,d;
identifier free;
position p1,p2;
@@
devm_request_irq@p1(e1,e2,...,x)
... when any
when != e2 = a
when != x = b
if (...) {
... when != e2 = c
when != x = d
free@p2(...,x,...);
...
return ...;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We recently added locking to this function, but there was an error path
which accidentally returned holding a lock. Also we returned zero on
failure on some paths instead of the error code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add .get_selection() and .set_selection() soc-camera host driver
operations. Additionally check, that the user is not trying to change the
output sizes during a running capture.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add explicit conversions from UYVY and YUYV to YUYV so that
csicr1 configuration can be set properly for each format.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Several client drivers access the hardware at probe time, for instance
to read the probe chip ID. Such chips need to be powered up when being
probed.
soc-camera handles this by powering chips up in the soc-camera probe
implementation. However, this will break with non soc-camera hosts that
don't perform the same operations.
Fix the problem by pushing the power up/down from the soc-camera core
down to individual drivers on a needs basis.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of forcing all soc-camera drivers to go through the mid-layer to
handle power management, create soc_camera_power_[on|off]() functions
that can be called from the subdev .s_power() operation to manage
regulators and platform-specific power handling. This allows non
soc-camera hosts to use soc-camera-aware clients.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[g.liakhovetski@gmx.de: fix compile breakage]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Powering off a device is a "best effort" task: failure to execute one of
the steps should not prevent the next steps to be executed. For
instance, an I2C communication error when putting the chip in stand-by
mode should not prevent the more agressive next step of turning the
chip's power supply off.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The .s_power() call only covers the .g_mbus_fmt() operation call.
Several clients required to be powered on to retrieve the current mbus
format but have now been fixed. The .s_power() call is thus not needed
anymore and can be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The remaining drivers are mostly platform drivers. Name the
dir to reflect it.
It makes sense to latter break it into a few other dirs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
