Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
Add support to inet v4 raw sockets for binding to nonlocal addresses
through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as
the ipv4.ip_nonlocal_bind kernel parameter.
Add helper function to inet_sock.h to check for bind address validity on
the base of the address type and whether nonlocal address are enabled
for the socket via any of the sockopts/sysctl, deduplicating checks in
ipv4/ping.c, ipv4/af_inet.c, ipv6/af_inet6.c (for mapped v4->v6
addresses), and ipv4/raw.c.
Add test cases with IP[V6]_FREEBIND verifying that both v4 and v6 raw
sockets support binding to nonlocal addresses after the change. Add
necessary support for the test cases to nettest.
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211117090010.125393-1-pbl@bestov.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xsk_configure_umem() needs hugepages to work in unaligned mode. So when
hugepages are not configured, 'unaligned' tests should be skipped which
is determined by the helper function hugepages_present(). This function
erroneously returns true with MAP_NORESERVE flag even when no hugepages
are configured. The removal of this flag fixes the issue.
The test TEST_TYPE_UNALIGNED_INV_DESC also needs to be skipped when
there are no hugepages. However, this was not skipped as there was no
check for presence of hugepages and hence was failing. The check to skip
the test has now been added.
Fixes: a4ba98dd0c (selftests: xsk: Add test for unaligned mode)
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211117123613.22288-1-tirthendu.sarkar@intel.com
add a selftest that verifies the correct behavior of TC act_mirred egress
to ingress: in particular, it checks if the dst_entry is removed from skb
before redirect egress -> ingress. The correct behavior is: an ICMP 'echo
request' generated by ping will be received and generate a reply the same
way as the one generated by mausezahn.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-11-16
We've added 12 non-merge commits during the last 5 day(s) which contain
a total of 23 files changed, 573 insertions(+), 73 deletions(-).
The main changes are:
1) Fix pruning regression where verifier went overly conservative rejecting
previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer.
2) Fix verifier TOCTOU bug when using read-only map's values as constant
scalars during verification, from Daniel Borkmann.
3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson.
4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker.
5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing
programs due to deadlock possibilities, from Dmitrii Banshchikov.
6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang.
7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin.
8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
udp: Validate checksum in udp_read_sock()
bpf: Fix toctou on read-only map's constant scalar tracking
samples/bpf: Fix build error due to -isystem removal
selftests/bpf: Add tests for restricted helpers
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
libbpf: Perform map fd cleanup for gen_loader in case of error
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
tools/runqslower: Fix cross-build
samples/bpf: Fix summary per-sec stats in xdp_sample_user
selftests/bpf: Check map in map pruning
bpf: Fix inner map state pruning regression.
xsk: Fix crash on double free in buffer pool
====================
Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
Add benchmark to measure overhead of uprobes and uretprobes. Also have
a baseline (no uprobe attached) benchmark.
On my dev machine, baseline benchmark can trigger 130M user_target()
invocations. When uprobe is attached, this falls to just 700K. With
uretprobe, we get down to 520K:
$ sudo ./bench trig-uprobe-base -a
Summary: hits 131.289 ± 2.872M/s
# UPROBE
$ sudo ./bench -a trig-uprobe-without-nop
Summary: hits 0.729 ± 0.007M/s
$ sudo ./bench -a trig-uprobe-with-nop
Summary: hits 1.798 ± 0.017M/s
# URETPROBE
$ sudo ./bench -a trig-uretprobe-without-nop
Summary: hits 0.508 ± 0.012M/s
$ sudo ./bench -a trig-uretprobe-with-nop
Summary: hits 0.883 ± 0.008M/s
So there is almost 2.5x performance difference between probing nop vs
non-nop instruction for entry uprobe. And 1.7x difference for uretprobe.
This means that non-nop uprobe overhead is around 1.4 microseconds for uprobe
and 2 microseconds for non-nop uretprobe.
For nop variants, uprobe and uretprobe overhead is down to 0.556 and
1.13 microseconds, respectively.
For comparison, just doing a very low-overhead syscall (with no BPF
programs attached anywhere) gives:
$ sudo ./bench trig-base -a
Summary: hits 4.830 ± 0.036M/s
So uprobes are about 2.67x slower than pure context switch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211116013041.4072571-1-andrii@kernel.org
Script test_bpftool_synctypes.py parses a number of files in the bpftool
directory (or even elsewhere in the repo) to make sure that the list of
types or options in those different files are consistent. Instead of
having fixed paths, let's make the directories configurable through
environment variable. This should make easier in the future to run the
script in a different setup, for example on an out-of-tree bpftool
mirror with a different layout.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115225844.33943-4-quentin@isovalent.com
test_bpftool_synctypes.py helps detecting inconsistencies in bpftool
between the different list of types and options scattered in the
sources, the documentation, and the bash completion. For options that
apply to all bpftool commands, the script had a hardcoded list of
values, and would use them to check whether the man pages are
up-to-date. When writing the script, it felt acceptable to have this
list in order to avoid to open and parse bpftool's main.h every time,
and because the list of global options in bpftool doesn't change so
often.
However, this is prone to omissions, and we recently added a new
-l|--legacy option which was described in common_options.rst, but not
listed in the options summary of each manual page. The script did not
complain, because it keeps comparing the hardcoded list to the (now)
outdated list in the header file.
To address the issue, this commit brings the following changes:
- Options that are common to all bpftool commands (--json, --pretty, and
--debug) are moved to a dedicated file, and used in the definition of
a RST substitution. This substitution is used in the sources of all
the man pages.
- This list of common options is updated, with the addition of the new
-l|--legacy option.
- The script test_bpftool_synctypes.py is updated to compare:
- Options specific to a command, found in C files, for the
interactive help messages, with the same specific options from the
relevant man page for that command.
- Common options, checked just once: the list in main.h is
compared with the new list in substitutions.rst.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com
Thread creation requires taking the mmap_sem in write mode, which causes
vCPU threads running in guest mode to block while they are populating
memory. Fix this by waiting for all vCPU threads to be created and start
running before entering guest mode on any one vCPU thread.
This substantially improves the "Populate memory time" when using 1GiB
pages since it allows all vCPUs to zero pages in parallel rather than
blocking because a writer is waiting (which is waiting for another vCPU
that is busy zeroing a 1GiB page).
Before:
$ ./dirty_log_perf_test -v256 -s anonymous_hugetlb_1gb
...
Populate memory time: 52.811184013s
After:
$ ./dirty_log_perf_test -v256 -s anonymous_hugetlb_1gb
...
Populate memory time: 10.204573342s
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111001257.1446428-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vCPU thread creation and joining to common helper functions. This
is in preparation for the next commit which ensures that all vCPU
threads are fully created before entering guest mode on any one
vCPU.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111001257.1446428-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Start at iteration 0 instead of -1 to avoid having to initialize
vcpu_last_completed_iteration when setting up vCPU threads. This
simplifies the next commit where we move vCPU thread initialization
out to a common helper.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111001257.1446428-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy perf_test_args to the guest during VM creation instead of relying on
the caller to do so at their leisure. Ideally, tests wouldn't even be
able to modify perf_test_args, i.e. they would have no motivation to do
the sync, but enforcing that is arguably a net negative for readability.
No functional change intended.
[Set wr_fract=1 by default and add helper to override it since the new
access_tracking_perf_test needs to set it dynamically.]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-13-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fill the per-vCPU args when creating the perf_test VM instead of having
the caller do so. This helps ensure that any adjustments to the number
of pages (and thus vcpu_memory_bytes) are reflected in the per-VM args.
Automatically filling the per-vCPU args will also allow a future patch
to do the sync to the guest during creation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Updated access_tracking_perf_test as well.]
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-12-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove perf_test_args.host_page_size and instead use getpagesize() so
that it's somewhat obvious that, for tests that care about the host page
size, they care about the system page size, not the hardware page size,
e.g. that the logic is unchanged if hugepages are in play.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the per-VM GPA into perf_test_args instead of storing it as a
separate global variable. It's not obvious that guest_test_phys_mem
holds a GPA, nor that it's connected/coupled with per_vcpu->gpa.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Grab the per-vCPU GPA and number of pages from perf_util in the demand
paging test instead of duplicating perf_util's calculations.
Note, this may or may not result in a functional change. It's not clear
that the test's calculations are guaranteed to yield the same value as
perf_util, e.g. if guest_percpu_mem_size != vcpu_args->pages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assert that the GPA for a memslot backed by a hugepage is aligned to
the hugepage size and fix perf_test_util accordingly. Lack of GPA
alignment prevents KVM from backing the guest with hugepages, e.g. x86's
write-protection of hugepages when dirty logging is activated is
otherwise not exercised.
Add a comment explaining that guest_page_size is for non-huge pages to
try and avoid confusion about what it actually tracks.
Cc: Ben Gardon <bgardon@google.com>
Cc: Yanan Wang <wangyanan55@huawei.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Used get_backing_src_pagesz() to determine alignment dynamically.]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manually padding and aligning the mmap region is only needed when using
THP. When using HugeTLB, mmap will always return an address aligned to
the HugeTLB page size. Add a comment to clarify this and assert the mmap
behavior for HugeTLB.
[Removed requirement that HugeTLB mmaps must be padded per Yanan's
feedback and added assertion that mmap returns aligned addresses
when using HugeTLB.]
Cc: Ben Gardon <bgardon@google.com>
Cc: Yanan Wang <wangyanan55@huawei.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20211111000310.1435032-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor align() to work with non-pointers and split into separate
helpers for aligning up vs. down. Add align_ptr_up() for use with
pointers. Expose all helpers so that they can be used by tests and/or
other utilities. The align_down() helper in particular will be used to
ensure gpa alignment for hugepages.
No functional change intended.
[Added sepearate up/down helpers and replaced open-coded alignment
bit math throughout the KVM selftests.]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211111000310.1435032-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When I first looked at this, there was no support for guest exception
handling in the KVM selftests. In fact it was merged into 5.10 before
the Xen support got merged in 5.11, and I could have used it from the
start.
Hook it up now, to exercise the Xen upcall delivery. I'm about to make
things a bit more interesting by handling the full 2level event channel
stuff in-kernel on top of the basic vector injection that we already
have, and I'll want to build more tests on top.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without previous libbpf patch, the following error will occur:
$ ./test_progs -t btf
...
do_test_dedup:FAIL:check btf_dedup failed errno:-22#13/205 btf/dedup: btf_type_tag #5, struct:FAIL
And the previous libbpf patch fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211115163943.3922547-1-yhs@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the CFLAGS options were incorrectly removed in the recent rework
of the GPIO selftests. While some of the flags were specific to the old
implementation the remainder are still relevant. Restore those options.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
When compiled with -Wall gpio-mockup-cdev.c reports an uninitialised
variable warning. This is a false positive, as the variable is ignored
in the case it is uninitialised, but initialise the variable anyway
to remove the warning.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio selftests build against the system includes rather than the
headers from the linux tree. This results in the compile failing if
the system includes are outdated.
Prefer the headers from the linux tree, as per other selftests.
Fixes: 8bc395a6a2 ("selftests: gpio: rework and simplify test implementation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
[Kent: reworded commit comment and added Fixes:]
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are now at least three distinct flavours of netcat/nc tool:
'original' version, one version ported from openbsd and nmap-ncat.
The script only works with original because it sets SOREUSEPORT option.
Other nc versions return 'port already in use' error and port shadow test fails:
PASS: inet IPv6 redirection for ns2-hMHcaRvx
nc: bind failed: Address already in use
ERROR: portshadow test default: got reply from "ROUTER", not CLIENT as intended
Switch to socat instead.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull more kvm updates from Paolo Bonzini:
"New x86 features:
- Guest API and guest kernel support for SEV live migration
- SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
- Fix misuse of gfn-to-pfn cache when recording guest steal time /
preempted status
- Fix selftests on APICv machines
- Fix sparse warnings
- Fix detection of KVM features in CPUID
- Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
- Fixes and cleanups for MSR bitmap handling
- Cleanups for INVPCID
- Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
- Fix finalization of host stage2 mappings
- Tighten the return value of kvm_vcpu_preferred_target()
- Make sure the extraction of ESR_ELx.EC is limited to architected
bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: SEV: unify cgroup cleanup code for svm_vm_migrate_from
KVM: x86: move guest_pv_has out of user_access section
KVM: x86: Drop arbitrary KVM_SOFT_MAX_VCPUS
KVM: Move INVPCID type check from vmx and svm to the common kvm_handle_invpcid()
KVM: VMX: Add a helper function to retrieve the GPR index for INVPCID, INVVPID, and INVEPT
KVM: nVMX: Clean up x2APIC MSR handling for L2
KVM: VMX: Macrofy the MSR bitmap getters and setters
KVM: nVMX: Handle dynamic MSR intercept toggling
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
KVM: x86: Don't update vcpu->arch.pv_eoi.msr_val when a bogus value was written to MSR_KVM_PV_EOI_EN
KVM: x86: Rename kvm_lapic_enable_pv_eoi()
KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES
KVM: x86: Add helper to consolidate core logic of SET_CPUID{2} flows
kvm: mmu: Use fast PF path for access tracking of huge pages when possible
KVM: x86/mmu: Properly dereference rcu-protected TDP MMU sptep iterator
KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active
kvm: x86: Convert return type of *is_valid_rdpmc_ecx() to bool
KVM: x86: Fix recording of guest steal time / preempted status
selftest: KVM: Add intra host migration tests
selftest: KVM: Add open sev dev helper
...
Commit be79505caf ("tools/runqslower: Install libbpf headers when
building") uses the target libbpf to build the host bpftool, which
doesn't work when cross-building:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/runqslower O=/tmp/runqslower
...
LINK /tmp/runqslower/bpftool/bpftool
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a(libbpf-in.o): Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
When cross-building, the target architecture differs from the host. The
bpftool used for building runqslower is executed on the host, and thus
must use a different libbpf than that used for runqslower itself.
Remove the LIBBPF_OUTPUT and LIBBPF_DESTDIR parameters, so the bpftool
build makes its own library if necessary.
In the selftests, pass the host bpftool, already a prerequisite for the
runqslower recipe, as BPFTOOL_OUTPUT. The runqslower Makefile will use
the bpftool that's already built for selftests instead of making a new
one.
Fixes: be79505caf ("tools/runqslower: Install libbpf headers when building")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211112155128.565680-1-jean-philippe@linaro.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that two registers with a map_value loaded from a nested
map are considered equivalent for the purpose of state pruning
and don't cause the verifier to revisit a pruning point.
This uses a rather crude match on the number of insns visited by
the verifier, which might change in the future. I've therefore
tried to keep the code as "unpruneable" as possible by having
the code paths only converge on the second to last instruction.
Should you require to adjust the test in the future, reducing the
number of processed instructions should always be safe. Increasing
them could cause another regression, so proceed with caution.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211111161452.86864-1-lmb@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When using clang to build selftests with LLVM=1 in make commandline,
I hit the following compiler warning:
benchs/bench_bloom_filter_map.c:84:46: warning: result of comparison of constant 256
with expression of type '__u8' (aka 'unsigned char') is always false
[-Wtautological-constant-out-of-range-compare]
if (args.value_size < 2 || args.value_size > 256) {
~~~~~~~~~~~~~~~ ^ ~~~
The reason is arg.vaue_size has type __u8, so comparison "args.value_size > 256"
is always false.
This patch fixed the issue by doing proper comparison before assigning the
value to args.value_size. The patch also fixed the same issue in two
other places.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112204838.3579953-1-yhs@fb.com
When using clang to build selftests with LLVM=1 in make commandline,
I hit the following compiler warning:
xdpxceiver.c:747:6: warning: variable 'total' set but not used [-Wunused-but-set-variable]
u32 total = 0;
^
This patch fixed the issue by removing that declaration and its
assocatied unused operation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112204833.3579457-1-yhs@fb.com
The following is the main btf_type_tag usage in the
C test:
#define __tag1 __attribute__((btf_type_tag("tag1")))
#define __tag2 __attribute__((btf_type_tag("tag2")))
struct btf_type_tag_test {
int __tag1 * __tag1 __tag2 *p;
} g;
The bpftool raw dump with related types:
[4] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[11] STRUCT 'btf_type_tag_test' size=8 vlen=1
'p' type_id=14 bits_offset=0
[12] TYPE_TAG 'tag1' type_id=16
[13] TYPE_TAG 'tag2' type_id=12
[14] PTR '(anon)' type_id=13
[15] TYPE_TAG 'tag1' type_id=4
[16] PTR '(anon)' type_id=15
[17] VAR 'g' type_id=11, linkage=global
With format C dump, we have
struct btf_type_tag_test {
int __attribute__((btf_type_tag("tag1"))) * __attribute__((btf_type_tag("tag1"))) __attribute__((btf_type_tag("tag2"))) *p;
};
The result C code is identical to the original definition except macro's are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012646.1508231-1-yhs@fb.com
Rename progs/tag.c to progs/btf_decl_tag.c so we can introduce
progs/btf_type_tag.c in the next patch.
Also create a subtest for btf_decl_tag in prog_tests/btf_tag.c
so we can introduce btf_type_tag subtest in the next patch.
I also took opportunity to remove the check whether __has_attribute
is defined or not in progs/btf_decl_tag.c since all recent
clangs should already support this macro.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012641.1507144-1-yhs@fb.com
