Commit Graph

14 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab
b00ade2bb1 [media] siano: Use the default firmware for Stellar
The Stellar firmware load routine is different. Improve it to use
the default firmware, if no modprobe parameter tells otherwise.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Tested-by: André Roth <neolynx@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-14 06:41:10 -03:00
Mauro Carvalho Chehab
811a4f6d11 [media] siano: Fix initialization for Stellar models
Since kernel 3.8, the initialization for Stellar (sms1000)
devices are broken.
Those devices have a behaviour different than usual sms1100
and sms2270: they start with one USB ID (devices in cold state),
but after firmware load, they get a different USB ID.
This weren't docummented at the driver. So, the patches that added
support for sms2270 broke it.
Properly documment it, and provide a debug log that allows to
follow all phases of the device initialization:
	smsusb_probe: board id=13, interface number 0
	smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup
	smsusb_probe: board id=13, interface number 1
	smsusb_probe: smsusb_probe 1
	smsusb_probe: endpoint 0 81 02 64
	smsusb_probe: endpoint 1 02 02 64
	smsusb_probe: stellar device in cold state was found at usb\4-2.
	smsusb1_load_firmware: sent 38144(38144) bytes, rc 0
	smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144
	smsusb_probe: stellar device now in warm state
	usbcore: registered new interface driver smsusb
	usb 4-2: USB disconnect, device number 52
	usb 4-2: new full-speed USB device number 53 using uhci_hcd
	usb 4-2: New USB device found, idVendor=187f, idProduct=0100
	usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
	usb 4-2: Product: SMS DVBT-BDA Receiver
	usb 4-2: Manufacturer: Siano Mobile Silicon
	smsusb_probe: board id=1, interface number 0
	smsusb_probe: smsusb_probe 0
	smsusb_probe: endpoint 0 81 02 64
	smsusb_probe: endpoint 1 02 02 64
	smsusb_init_device: in_ep = 81, out_ep = 02
	smscore_register_device: allocated 50 buffers
	smscore_register_device: device ffff88012a00bc00 created
	smsusb_init_device: smsusb_start_streaming(...).
	smscore_set_device_mode: set device mode to 4
	smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver"
	smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12
	smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12
	smscore_set_device_mode: Success setting device mode.
	smscore_init_ir: IR port has not been detected
	smscore_start_device: device ffff88012a00bc00 started, rc 0
	smsusb_init_device: device 0xffff88002cfa6000 created
	smsusb_probe: Device initialized with return code 0
	DVB: registering new adapter (Siano Stellar Digital Receiver)
	usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
	smscore_register_client: ffff88012174a000 693 1
	sms_board_dvb3_event: DVB3_EVENT_HOTPLUG
	smsdvb_hotplug: success
	smsdvb_module_init:

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Tested-by: André Roth <neolynx@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-14 06:40:56 -03:00
Mauro Carvalho Chehab
f43b396c71 [media] siano: Improve debug/info messages
Some messages are not clear, some are debug data, but are
shown as errors, and one message is duplicated.
Cleanup that mess in order to provide a cleaner log.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Tested-by: André Roth <neolynx@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-14 06:40:32 -03:00
Mauro Carvalho Chehab
28a59df4d7 [media] siano: remove the remaining CamelCase compliants
Remove the remaining CamelCase checkpatch.pl compliants.
There are still a few left, but those are due to USB and
DVB APIs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:45 -03:00
Mauro Carvalho Chehab
dfef84fc13 [media] siano: get rid of CammelCase from smscoreapi.h
It is almost impossible to see a compliant with checkpatch.pl
on those Siano drivers, as there are simply too much violations
on it. So, now that a big change was done, the better is to
cleanup the checkpatch compliants.

Let's first replace all CammelCase symbols found at smscoreapi.h
using camel_case namespace. That removed 144 checkpatch.pl
compliants on this file. Of course, the other files need to be
fixed accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:16 -03:00
Mauro Carvalho Chehab
07bb6bdddf [media] siano: remove a bogus printk line
The logic that detects the types of sms devices is bogus. It returns
	[ 4645.187790] smsusb_init_device: line: 372: Unspecified sms device type!
For several devices, including the one I have (SMS_RIO). In a matter
of fact, the right thing to do there is to print an error only if
the device is really unknown (SMS_UNKNOWN_TYPE).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:53:42 -03:00
Mauro Carvalho Chehab
503efe5cfc [media] siano: split debugfs code into a separate file
To avoid mixing two different things at the same place, move the
debugfs code into a separate file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:48:41 -03:00
Mauro Carvalho Chehab
80ccb51a0f [media] siano: simplify message endianness logic
Currently, every time a message is sent or received, the endiannes
need to be fixed on big endian machines. This is currently done
on every call to the send API, and on every msg reception logic.
Instead of doing that, move it to the send/receive functions.
That simplifies the logic and avoids the risk of forgetting to
fix it somewhere.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:46:18 -03:00
Mauro Carvalho Chehab
347d8f1fa6 [media] siano: add new devices to the Siano Driver
This patch is based on Doron Cohen's patches:
	http://patchwork.linuxtv.org/patch/7881/
	http://patchwork.linuxtv.org/patch/7888/
	http://patchwork.linuxtv.org/patch/7883/
It basically merges the above patches, rebasing them to
the macro definitions used upstream, with are different
 than the ones used by them internally.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:45:06 -03:00
Mauro Carvalho Chehab
05f0ffbc48 [media] siano: use USB endpoint descriptors for in/out endp
Instead of using hardcoded descriptors, detect them from the
USB descriptors.
This patch is rebased form Doron Cohen's patch:
	http://patchwork.linuxtv.org/patch/7883/

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:38:02 -03:00
Mauro Carvalho Chehab
4c3bdb5e2f [media] siano: better debug send/receive messages
Instead of printing a message for some random messages, print
it for all sent/received ones. That helps a lot to debug
what's going on.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:35:49 -03:00
Greg Kroah-Hartman
4c62e9764a Drivers: media: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:02 -08:00
Mauro Carvalho Chehab
79e8c7bebb Linux 3.6-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQNUEyAAoJEHm+PkMAQRiGs+sH/iLtdAVcfBfUwdmGV0qDXbVE
 L3gCg3IERPCSaQo8qsT3zujdLAQ2HsiMs73jbqJaBWSV16ZMqkglRKbn+QMGpqJV
 bi/pf5Akrm9IL/u+427ycB8QxzyjGal8uJ6btuwXa03VROSfOsEiQbtsByFNaDv/
 8oq0/DaE8mWRedlcAaeN+l8nD4Enb2jSKp0UADkBMnUr4KCbwSVQ+ITXAggqVq23
 htA3Yt0oGf1JYq+k99D5k92h0I/4VwiorUgwPKhmS5DM9gVtJ4L+SigbekS/MFq+
 huyzOHRWlO++OxBlgSTMuJAE1k/G2B7tGeoERY0tEL/hAWcKYTfGIXSc7X6JvM0=
 =Dmsv
 -----END PGP SIGNATURE-----

Merge tag 'v3.6-rc3' into staging/for_v3.7

Linux 3.6-rc3

* tag 'v3.6-rc3': (764 commits)
  Linux 3.6-rc3
  task_work: add a scheduling point in task_work_run()
  fs: fix fs/namei.c kernel-doc warnings
  eventpoll: use-after-possible-free in epoll_create1()
  vfio: grab vfio_device reference *before* exposing the sucker via fd_install()
  vfio: get rid of vfio_device_put()/vfio_group_get_device* races
  vfio: get rid of open-coding kref_put_mutex
  introduce kref_put_mutex()
  vfio: don't dereference after kfree...
  fbcon: fix race condition between console lock and cursor timer (v1.1)
  mm: compaction: Abort async compaction if locks are contended or taking too long
  mm: have order > 0 compaction start near a pageblock with free pages
  rapidio/tsi721: fix unused variable compiler warning
  rapidio/tsi721: fix inbound doorbell interrupt handling
  drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour mode
  mm: correct page->pfmemalloc to fix deactivate_slab regression
  drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributes
  mm/compaction.c: fix deferring compaction mistake
  drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ resources
  string: do not export memweight() to userspace
  ...
2012-08-24 11:25:10 -03:00
Mauro Carvalho Chehab
786baecfe7 [media] dvb-usb: move it to drivers/media/usb/dvb-usb
As media/dvb will be removed, move it to a proper place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13 23:26:31 -03:00