... as is the case when !CONFIG_ACPI.
Fixes the following W=1 kernel build warning:
drivers/misc/eeprom/at24.c:228:36: warning: ‘at24_acpi_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200701093616.GX1179328@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The at24 driver attempts to read a byte from the device to validate that
it's actually present, and if not, disables the vcc regulator and
returns -ENODEV. However, between the read and the error handling path,
pm_runtime_idle() is called and invokes the driver's suspend callback,
which also disables the vcc regulator. This leads to an underflow of the
regulator enable count if the EEPROM is not present.
Move the pm_runtime_suspend() call to be after the error handling path
to resolve this.
Fixes: cd5676db05 ("misc: eeprom: at24: support pm_runtime control")
Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This ID is used at leas on some variants of MSC C6B-SLH board.
Signed-off-by: Markus Pietrek <mpie@msc-ge.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Although in the most platforms, the power of eeprom are alway
on, some platforms disable the eeprom power in order to meet
low power request. This patch add the pm_runtime ops to control
power to support all platforms.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
[Bartosz: rebased on top of current at24/for-next]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
NVMEM framework is an interface for the at24 EEPROMs as well as for
other drivers, instead of passing the wp-gpios over the different
drivers each time, it would be better to pass it over the NVMEM
subsystem once and for all.
Removing the support for the write-protect pin after adding it to the
NVMEM subsystem.
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The current GPL v2.0 or later SPDX tag is 'GPL-2.0-or-later' as defined
at https://spdx.org/licenses/.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Currently when binding to an spd EEPROM, the at24 drivers logs the
following message:
256 byte spd EEPROM, read-only, 0 bytes/write
The last part is confusing, as by definition you don't write to a
read-only EEPROM, plus "0 bytes/write" makes no sense whatsoever.
I propose to have a different message for read-only EEPROMs, which
does not include this last part.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Pull i2c updates from Wolfram Sang:
- new driver for ICY, an Amiga Zorro card :)
- axxia driver gained slave mode support, NXP driver gained ACPI
- the slave EEPROM backend gained 16 bit address support
- and lots of regular driver updates and reworks
* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: tegra: Move suspend handling to NOIRQ phase
i2c: imx: ACPI support for NXP i2c controller
i2c: uniphier(-f): remove all dev_dbg()
i2c: uniphier(-f): use devm_platform_ioremap_resource()
i2c: slave-eeprom: Add comment about address handling
i2c: exynos5: Remove IRQF_ONESHOT
i2c: stm32f7: Make structure stm32f7_i2c_algo constant
i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
i2c-eeprom_slave: Add support for more eeprom models
i2c: fsi: Add of_put_node() before break
i2c: synquacer: Make synquacer_i2c_ops constant
i2c: hix5hd2: Remove IRQF_ONESHOT
i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
watchdog: iTCO: Add support for Cannon Lake PCH iTCO
i2c: iproc: Make bcm_iproc_i2c_quirks constant
i2c: iproc: Add full name of devicetree node to adapter name
i2c: piix4: Add ACPI support
i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
i2c: ocores: use request_any_context_irq() to register IRQ handler
i2c: designware: Fix optional reset error handling
...
The integration of the at24 driver into the nvmem framework broke the
world-readability of spd EEPROMs. Fix it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Fixes: 57d155506d ("eeprom: at24: extend driver to plug into the NVMEM framework")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We used to have a call to ilog2() in AT24_DEVICE_MAGIC(). That's long
gone so this header is no longer needed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
We no longer have platform data in at24, so this comment is invalid.
Make it refer to device tree & properties instead.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = devm_kzalloc(dev, size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);
Notice that, in this case, variable at24_size is not necessary, hence it
is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/misc/eeprom/at24.c: In function at24_make_dummy_client:
drivers/misc/eeprom/at24.c:514:21: warning: variable addr set but not used [-Wunused-but-set-variable]
It's not used since commit e7308628d0 ("eeprom:
at24: use devm_i2c_new_dummy_device()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
If we move the nvmem registration above the pm enable calls and the
test read, we can drop the error label and make the code more readable
as there's now only a single place where we must call
pm_runtime_disable() in error path.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Now that it's upstream, use the resource managed version
of i2c_new_dummy_device().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
There are no more users of at24_platform_data. Remove the relevant
header and modify the driver code to not use it anymore.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Within at24_loop_until_timeout the timestamp used for timeout checking
is recorded after the I2C transfer and sleep_range(). Under high CPU
load either the execution time for I2C transfer or sleep_range() could
actually be larger than the timeout value. Worst case the I2C transfer
is only tried once because the loop will exit due to the timeout
although the EEPROM is now ready.
To fix this issue the timestamp is recorded at the beginning of each
iteration. That is, before I2C transfer and sleep. Then the timeout
is actually checked against the timestamp of the previous iteration.
This makes sure that even if the timeout is reached, there is still one
more chance to try the I2C transfer in case the EEPROM is ready.
Example:
If you have a system which combines high CPU load with repeated EEPROM
writes you will run into the following scenario.
- System makes a successful regmap_bulk_write() to EEPROM.
- System wants to perform another write to EEPROM but EEPROM is still
busy with the last write.
- Because of high CPU load the usleep_range() will sleep more than
25 ms (at24_write_timeout).
- Within the over-long sleeping the EEPROM finished the previous write
operation and is ready again.
- at24_loop_until_timeout() will detect timeout and won't try to write.
Signed-off-by: Wang Xin <xin.wang7@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Provide a flexible way to determine the addressing bits of eeprom.
Pass the addressing bits to driver through address-width property.
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Move the code responsible for creating the dummy i2c clients used by
chips taking multiple slave addresses to a separate function.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Rosin <peda@axentia.se>
This allows us to drop two opencoded for loops. We also don't need to
check if the i2c client is NULL before calling i2c_unregister_device().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Rosin <peda@axentia.se>
We now have a managed variant of nvmem_register(). Use it
in at24_probe().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Rosin <peda@axentia.se>
Commit feb2f19b1e ("eeprom: at24: move platform data processing into
a separate routine") introduced a bug where we incorrectly retireve the
at24_chip_data structure. Remove the unnecessary ampersand operator.
Fixes: feb2f19b1e ("eeprom: at24: move platform data processing into a separate routine")
Reported-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Replace the GPL (or later) header with the SPDX identifier
for GPL-2.0+.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Save one call and make code prettier by checking the i2c functionality
in the beginning of at24_probe(), saving the relevant values and
reusing them later.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align the broken line with the opening parenthesis to stay consistent
with the rest of the driver code.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the newline between the nvmem registration and its return value
check. This is consistent with the rest of the driver code.
Add a missing newline between two pdata checks to stay consistent with
all the others.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code in at24_probe() is pretty mangled. It can be cleaned up a bit
by doing things one by one.
Let's group the code by logic: parse and verify pdata, initialize the
regmap, allocate and fill the fields of at24_data, allocate dummy i2c
devices, initialize pm & register with nvmem.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not all fields from at24_platform_data are needed in at24_data. Let's
keep just the ones we need and not carry the whole platform_data
structure all the time.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver can receive its device data from different sources
depending on the system. Move the entire code processing platform data,
device tree and acpi into a separate function.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new probe() style for i2c drivers.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a helper function for accessing the device struct of the base
i2c client. This routine is named in a way that reflects its purpose
unlike the previously hand-coded dereferencing.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a helper variable for the size we want to allocate with
devm_kzalloc() and save an ugly line break.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use the &client->dev construct all over in at24_probe(). Use
a helper variable which is more readable and allows to avoid a couple
unnecessary line breaks.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reflect the purpose of this variable: it contains platform data so name
it such.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As preparation for at24_probe() refactoring: rename at24_get_pdata()
to at24_properties_to_pdata(). We're doing it because we'll move the
pdata parsing code into a separate function which will be called
at24_get_pdata(). Current routine with that name actually parses
the device properties so change its name to reflect its purpose.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We support certain models the size of which is not a power of 2. This
is not a reason to emit a warning.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can reuse ret instead of defining a loop-local status variable.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can reuse ret instead of defining a loop-local status variable.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are just two left-overs from times when this driver was bigger.
They are not really useful anymore. Remove them.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arrange declarations of local variables by line length as visually
it's easier to read.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This structure only needs to exist during the call to nvmem_register().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use our own mutex for locking. Disable the regmap-specific locking.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add all supported at24 variants to the of_match table.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
AT24 EEPROMs have a write-protect pin, which - when pulled high -
inhibits writes to the upper quadrant of memory (although it has been
observed that on some chips it disables writing to the entire memory
range).
On some boards, this pin is connected to a GPIO and pulled high by
default, which forces the user to manually change its state before
writing. On linux this means that we either need to hog the line all
the time, or set the GPIO value before writing from outside of the
at24 driver.
Make the driver check if the write-protect GPIO was defined in the
device tree and pull it low whenever writing to the EEPROM.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
The chip size passed via devicetree, i2c, or acpi device ids is now no
longer limited to a power of two. So the temporary fix can be removed.
Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
