Kernel bugzilla 10273
As reported by Jos van der Ende, ever since commit
5a606b72a4 ("[SPARC64]: Do not ACK an
INO if it is disabled or inprogress.") sun4u interrupts
can get stuck.
What this changset did was add the following conditional to
the various IRQ chip ->enable() handlers on sparc64:
if (unlikely(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS)))
return;
which is correct, however it means that special care is needed
in the ->enable() method.
Specifically we must put the interrupt into IDLE state during
an enable, or else it might never be sent out again.
Setting the INO interrupt state to IDLE resets the state machine,
the interrupt input to the INO is retested by the hardware, and
if an interrupt is being signalled by the device, the INO
moves back into TRANSMIT state, and an interrupt vector is sent
to the cpu.
The two sun4v IRQ chip handlers were already doing this properly,
only sun4u got it wrong.
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise all sorts of bad things can happen, including
spurious softlockup reports.
Other platforms have this same bug, in one form or
another, just don't see the issue because they
don't sleep as long as sparc64 can in NOHZ.
Thanks to some brilliant debugging by Peter Zijlstra.
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have a magic cookie in the pt_regs, we can
properly detect trap frames in stack bactraces.
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we indicate the "restart system call" in the
trap type field of pt_regs->magic, we don't need to
set the %l6 boolean in all of the trap return paths.
And we therefore don't need to pass it to do_notify_resume().
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we can check the trap type directly, we don't need the
funny restart_syscall indication from the trap return paths.
Signed-off-by: David S. Miller <davem@davemloft.net>
This sets us up for several simplifications and facilities:
1) The magic cookie lets us identify trap frames more
accurately in stack backtraces.
2) The trap type lets us simplify all of the "are we in
a syscall" state management and checks.
3) We can now see if a task off the cpu is sleeping in
a system call or not. In fact, we can see what
trap it is sleeping in whatever the type. The utrace
guys will use this.
Based upon some discussions with Roland McGrath.
Signed-off-by: David S. Miller <davem@davemloft.net>
The following cleanups are now possible:
- arch/sparc64/kernel/entry.S:ret_sys_call no longer has to be global
- arch/sparc64/kernel/sparc64_ksyms.c:
remove no longer used prototypes
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there is only code to parse NUMA attributes on
sun4v/niagara systems, but later on we will add such parsing
for older systems.
Signed-off-by: David S. Miller <davem@davemloft.net>
We have to do it like this before we can move the PROM and MDESC device
tree code over to using lmb_alloc().
Signed-off-by: David S. Miller <davem@davemloft.net>
Call lmb_add() on available regions, and call lmb_reserve()
on the main kernel image and the ramdisk (if any).
Signed-off-by: David S. Miller <davem@davemloft.net>
And add some comments explaining all of the quirks involved in
the way the bootloader provides this information.
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
[POWERPC] Fix compile breakage for 64-bit UP configs
[POWERPC] Define copy_siginfo_from_user32
[POWERPC] Add compat handler for PTRACE_GETSIGINFO
[POWERPC] i2c: Fix build breakage introduced by OF helpers
[POWERPC] Optimize fls64() on 64-bit processors
[POWERPC] irqtrace support for 64-bit powerpc
[POWERPC] Stacktrace support for lockdep
[POWERPC] Move stackframe definitions to common header
[POWERPC] Fix device-tree locking vs. interrupts
[POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
[POWERPC] Remove unused __max_memory variable
[POWERPC] Simplify xics direct/lpar irq_host setup
[POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
[POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
[POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
[POWERPC] Use asm-generic/bitops/find.h in bitops.h
[POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
[POWERPC] 85xx: Fix the size of qe muram for MPC8568E
[POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
[POWERPC] 86xx: mark functions static, other minor cleanups
...
None of these files use any of the functionality promised by
asm/semaphore.h. It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility. Thanks to Peter Zijlstra for fixing the lockdep
warning. Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
1) ptrace should pass 'current' to task_user_regset_view()
2) When fetching general registers using a 64-bit view, and
the target is 32-bit, we have to convert.
3) Skip the whole register window get/set code block if
the user isn't asking to access anything in there.
Otherwise we have problems if the user doesn't have
an address space setup. Fetching ptrace register is
still valid at such a time, and ptrace does not try
to access the register window area of the regset.
Signed-off-by: David S. Miller <davem@davemloft.net>
The calculation of the FPU reg save area pointer
was wrong.
Based upon an OOPS report from Tom Callaway.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some IOMMUs allocate memory areas spanning LLD's segment boundary limit. It
forces low level drivers to have a workaround to adjust scatter lists that the
IOMMU builds. We are in the process of making all the IOMMUs respect the
segment boundary limits to remove such work around in LLDs.
SPARC64 IOMMUs were rewritten to use the IOMMU helper functions and the commit
89c94f2f70 made the IOMMUs not allocate memory
areas spanning the segment boundary limit.
However, SPARC64 IOMMUs allocate memory areas first then try to merge them
(while some IOMMUs walk through all the sg entries to see how they can be
merged first and allocate memory areas). So SPARC64 IOMMUs also need the
boundary limit checking when they try to merge sg entries.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparse still doesn't like the funny cast we make from a scalar to a
"union semun" (which is correct by the C language and in particular
works with the sparc64 calling conventions, but sparse doesn't grok
that yet).
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 'UL' markers to DCU_* macros.
Declare C functions called from assembler in entry.h
Declare C functions called from within the sparc64 arch
code in include/asm-sparc64/*.h headers as appropriate.
Remove unused routines in traps.c
Signed-off-by: David S. Miller <davem@davemloft.net>
We create a local header file entry.h, under arch/sparc64/kernel/,
that we can use to declare routines either defined in assembler
or only invoked from assembler. As well as other data objects
which are private to the inner sparc64 kernel arch code.
Signed-off-by: David S. Miller <davem@davemloft.net>
Doing a 'flushw' every stack trace capture creates so much overhead
that it makes lockdep next to unusable.
We only care about the frame pointer chain and the function caller
program counters, so flush those by hand to the stack frame.
This is significantly more efficient than a 'flushw' because:
1) We only save 16 bytes per active register window to the stack.
2) This doesn't push the entire register window context of the current
call chain out of the cpu, forcing register window fill traps as we
return back down.
Note that we can't use 'restore' and 'save' instructions to move
around the register windows because that wouldn't work on Niagara
processors. They optimize 'save' into a new register window by
simply clearing out the registers instead of pulling them in from
the on-chip register window backing store.
Based upon a report by Tom Callaway.
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: exec PT_DTRACE
[SPARC64]: Use shorter list_splice_init() for brevity.
[SPARC64]: Remove most limitations to kernel image size.
The PT_DTRACE flag is meaningless and obsolete.
Don't touch it.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
