forked from Minki/linux
21fbd59136
2400 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Liam R. Howlett
|
54a611b605 |
Maple Tree: add new data structure
Patch series "Introducing the Maple Tree" The maple tree is an RCU-safe range based B-tree designed to use modern processor cache efficiently. There are a number of places in the kernel that a non-overlapping range-based tree would be beneficial, especially one with a simple interface. If you use an rbtree with other data structures to improve performance or an interval tree to track non-overlapping ranges, then this is for you. The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf nodes. With the increased branching factor, it is significantly shorter than the rbtree so it has fewer cache misses. The removal of the linked list between subsequent entries also reduces the cache misses and the need to pull in the previous and next VMA during many tree alterations. The first user that is covered in this patch set is the vm_area_struct, where three data structures are replaced by the maple tree: the augmented rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The long term goal is to reduce or remove the mmap_lock contention. The plan is to get to the point where we use the maple tree in RCU mode. Readers will not block for writers. A single write operation will be allowed at a time. A reader re-walks if stale data is encountered. VMAs would be RCU enabled and this mode would be entered once multiple tasks are using the mm_struct. Davidlor said : Yes I like the maple tree, and at this stage I don't think we can ask for : more from this series wrt the MM - albeit there seems to still be some : folks reporting breakage. Fundamentally I see Liam's work to (re)move : complexity out of the MM (not to say that the actual maple tree is not : complex) by consolidating the three complimentary data structures very : much worth it considering performance does not take a hit. This was very : much a turn off with the range locking approach, which worst case scenario : incurred in prohibitive overhead. Also as Liam and Matthew have : mentioned, RCU opens up a lot of nice performance opportunities, and in : addition academia[1] has shown outstanding scalability of address spaces : with the foundation of replacing the locked rbtree with RCU aware trees. A similar work has been discovered in the academic press https://pdos.csail.mit.edu/papers/rcuvm:asplos12.pdf Sheer coincidence. We designed our tree with the intention of solving the hardest problem first. Upon settling on a b-tree variant and a rough outline, we researched ranged based b-trees and RCU b-trees and did find that article. So it was nice to find reassurances that we were on the right path, but our design choice of using ranges made that paper unusable for us. This patch (of 70): The maple tree is an RCU-safe range based B-tree designed to use modern processor cache efficiently. There are a number of places in the kernel that a non-overlapping range-based tree would be beneficial, especially one with a simple interface. If you use an rbtree with other data structures to improve performance or an interval tree to track non-overlapping ranges, then this is for you. The tree has a branching factor of 10 for non-leaf nodes and 16 for leaf nodes. With the increased branching factor, it is significantly shorter than the rbtree so it has fewer cache misses. The removal of the linked list between subsequent entries also reduces the cache misses and the need to pull in the previous and next VMA during many tree alterations. The first user that is covered in this patch set is the vm_area_struct, where three data structures are replaced by the maple tree: the augmented rbtree, the vma cache, and the linked list of VMAs in the mm_struct. The long term goal is to reduce or remove the mmap_lock contention. The plan is to get to the point where we use the maple tree in RCU mode. Readers will not block for writers. A single write operation will be allowed at a time. A reader re-walks if stale data is encountered. VMAs would be RCU enabled and this mode would be entered once multiple tasks are using the mm_struct. There is additional BUG_ON() calls added within the tree, most of which are in debug code. These will be replaced with a WARN_ON() call in the future. There is also additional BUG_ON() calls within the code which will also be reduced in number at a later date. These exist to catch things such as out-of-range accesses which would crash anyways. Link: https://lkml.kernel.org/r/20220906194824.2110408-1-Liam.Howlett@oracle.com Link: https://lkml.kernel.org/r/20220906194824.2110408-2-Liam.Howlett@oracle.com Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: David Howells <dhowells@redhat.com> Tested-by: Sven Schnelle <svens@linux.ibm.com> Tested-by: Yu Zhao <yuzhao@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Li Zhe
|
c4f20f1479 |
page_ext: introduce boot parameter 'early_page_ext'
In commit
|
||
Linus Torvalds
|
e022620b5d |
arm64 fixes for -rc3
- Fix workaround for Cortex-A76 erratum #1286807 - Add workaround for AMU erratum #2457168 on Cortex-A510 - Drop reference to removed CONFIG_ARCH_RANDOM #define - Fix parsing of the "rodata=full" cmdline option - Fix a bunch of issues in the SME register state switching and sigframe code - Fix incorrect extraction of the CTR_EL0.CWG register field - Fix ACPI cache topology probing when the PPTT is not present - Trivial comment and whitespace fixes -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmMIr4YQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNOpcB/9PQM3DtbFcCFJeetFxJYVSPHikHfEj4SHY H6NRNLA9JwwCqA1/RKbJQDpFS34JdL5UgtNuUFbg4zkH2aaeML7WKuRg396jv2ke GmHpOkNeIaae0NQes3MLZQf+Heh2oimRYwlPXJc23vhAIZagwby3yR/9POrxKm6p kamLIrmwU1mU7pwr7HEkRr1HOd/eOJ+q6P3UYrFlAgAp5PEfVGgcdjbHJ1gY1KWw HwR6s2yWQ71+Aug9wMS56TQszBedyuIOeKezAI+IbThF6t/kQlfJna+hqvPp0zEE mz1hss7ACpfDURdga35B1bE146aZ1SKEsXXaB853JI76K6D534Y9 =3oRd -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A bumper crop of arm64 fixes for -rc3. The largest change is fixing our parsing of the 'rodata=full' command line option, which kstrtobool() started treating as 'rodata=false'. The fix actually makes the parsing of that option much less fragile and updates the documentation at the same time. We still have a boot issue pending when KASLR is disabled at compile time, but there's a fresh fix on the list which I'll send next week if it holds up to testing. Summary: - Fix workaround for Cortex-A76 erratum #1286807 - Add workaround for AMU erratum #2457168 on Cortex-A510 - Drop reference to removed CONFIG_ARCH_RANDOM #define - Fix parsing of the "rodata=full" cmdline option - Fix a bunch of issues in the SME register state switching and sigframe code - Fix incorrect extraction of the CTR_EL0.CWG register field - Fix ACPI cache topology probing when the PPTT is not present - Trivial comment and whitespace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/sme: Don't flush SVE register state when handling SME traps arm64/sme: Don't flush SVE register state when allocating SME storage arm64/signal: Flush FPSIMD register state when disabling streaming mode arm64/signal: Raise limit on stack frames arm64/cache: Fix cache_type_cwg() for register generation arm64/sysreg: Guard SYS_FIELD_ macros for asm arm64/sysreg: Directly include bitfield.h arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly arm64: fix rodata=full arm64: Fix comment typo docs/arm64: elf_hwcaps: unify newlines in HWCAP lists arm64: adjust KASLR relocation after ARCH_RANDOM removal arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76 |
||
Mark Rutland
|
2e8cff0a0e |
arm64: fix rodata=full
On arm64, "rodata=full" has been suppored (but not documented) since commit: |
||
Nick Desaulniers
|
a0a12c3ed0 |
asm goto: eradicate CC_HAS_ASM_GOTO
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0. The minimum supported versions of these tools for the build according to Documentation/process/changes.rst are 5.1 and 11.0.0 respectively. Remove the feature detection script, Kconfig option, and clean up some fallback code that is no longer supported. The removed script was also testing for a GCC specific bug that was fixed in the 4.7 release. Also remove workarounds for bpftrace using clang older than 9.0.0, since other BPF backend fixes are required at this point. Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/ Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637 Acked-by: Borislav Petkov <bp@suse.de> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
0af5cb349a |
Kbuild updates for v5.20
- Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3) - Fix error of rpm-pkg cross-builds - Support riscv for checkstack tool - Re-enable -Wformwat warnings for Clang - Clean up modpost, Makefiles, and misc scripts -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmLykZUVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsG4QoP/3Ooac5+kmcm9nT+fwtuQkFMPDhW /5ipDgE8W6kwbGSZX7/KD/3otiUhyhhlUjh1tUHpl+WEoy9Q1orUzbyOzTQW0QYH zdGazuDBsTPa35Vmow3vGUyX1FdRNKsHuDXC1M2BBLZK05OEjyNMxgi6NowE/XnK nFVAdZgu6HYfym/L5FDuXEmM1EYiAcPZL37+rBAd5mVCEyDk3rW2TxDa05Gs/8dr 7QJ9rOKPS7+Hs/gc7w56z91eBzvWOhLjTcKFsqOuL3Yd1oFIwExAhaxo3TRUkp8i VBYKfty+9tXPxNNzKHBq4U9gONkuwQEQu3wOQbSKJQblkS5Sq2wfXH4kQoyCAZIB 5+lsI4idHnD1ZBpOjYxxDrIY6qD+eb/xbxa+AxILoFOK8P1uEn7IHAtwLAg9BzT0 NXdTd8W63D/5F6hVOJNqK8TPupINcWdXcvFvgz6q+Q6l8EDoVnsmSUP3F1qlJ0DI WhtKhX1CI1PC2T/8ruKJWfPTi6foHhzu4euYWuqUzMmlkhLbp9yHYDDxDN9Li2bh eT/Qy2oWHraLfXvmfhuE9SS0FrQgNtwtmPCVIn7JZTcji9JCt4ax7Erq3ufhG1BR oT1X4M1iangjILbZXJlrrS1qz3DeV84pjjR0TF/56ifqskRJPOPrfHnrQ0m3aMnh TDSweoE1ah1BcAlz =9kds -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the support for -O3 (CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3) - Fix error of rpm-pkg cross-builds - Support riscv for checkstack tool - Re-enable -Wformwat warnings for Clang - Clean up modpost, Makefiles, and misc scripts * tag 'kbuild-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) modpost: remove .symbol_white_list field entirely modpost: remove unneeded .symbol_white_list initializers modpost: add PATTERNS() helper macro modpost: shorten warning messages in report_sec_mismatch() Revert "Kbuild, lto, workaround: Don't warn for initcall_reference in modpost" modpost: use more reliable way to get fromsec in section_rel(a)() modpost: add array range check to sec_name() modpost: refactor get_secindex() kbuild: set EXIT trap before creating temporary directory modpost: remove unused Elf_Sword macro Makefile.extrawarn: re-enable -Wformat for clang kbuild: add dtbs_prepare target kconfig: Qt5: tell the user which packages are required modpost: use sym_get_data() to get module device_table data modpost: drop executable ELF support checkstack: add riscv support for scripts/checkstack.pl kconfig: shorten the temporary directory name for cc-option scripts: headers_install.sh: Update config leak ignore entries kbuild: error out if $(INSTALL_MOD_PATH) contains % or : kbuild: error out if $(KBUILD_EXTMOD) contains % or : ... |
||
|
Linus Torvalds
|
e74acdf55d |
Modules updates for 6.0
For the 6.0 merge window the modules code shifts to cleanup and minor fixes
effort. This is becomes much easier to do and review now due to the code
split to its own directory from effort on the last kernel release. I expect
to see more of this with time and as we expand on test coverage in the future.
The cleanups and fixes come from usual suspects such as Christophe Leroy and
Aaron Tomlin but there are also some other contributors.
One particular minor fix worth mentioning is from Helge Deller, where he spotted
a *forever* incorrect natural alignment on both ELF section header tables:
* .altinstructions
* __bug_table sections
A lot of back and forth went on in trying to determine the ill effects of this
misalignment being present for years and it has been determined there should
be no real ill effects unless you have a buggy exception handler. Helge actually
hit one of these buggy exception handlers on parisc which is how he ended up
spotting this issue. When implemented correctly these paths with incorrect
misalignment would just mean a performance penalty, but given that we are
dealing with alternatives on modules and with the __bug_table (where info
regardign BUG()/WARN() file/line information associated with it is stored)
this really shouldn't be a big deal.
The only other change with mentioning is the kmap() with kmap_local_page()
and my only concern with that was on what is done after preemption, but the
virtual addresses are restored after preemption. This is only used on module
decompression.
This all has sit on linux-next for a while except the kmap stuff which has
been there for 3 weeks.
-----BEGIN PGP SIGNATURE-----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=hPvl
-----END PGP SIGNATURE-----
Merge tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"For the 6.0 merge window the modules code shifts to cleanup and minor
fixes effort. This becomes much easier to do and review now due to the
code split to its own directory from effort on the last kernel
release. I expect to see more of this with time and as we expand on
test coverage in the future. The cleanups and fixes come from usual
suspects such as Christophe Leroy and Aaron Tomlin but there are also
some other contributors.
One particular minor fix worth mentioning is from Helge Deller, where
he spotted a *forever* incorrect natural alignment on both ELF section
header tables:
* .altinstructions
* __bug_table sections
A lot of back and forth went on in trying to determine the ill effects
of this misalignment being present for years and it has been
determined there should be no real ill effects unless you have a buggy
exception handler. Helge actually hit one of these buggy exception
handlers on parisc which is how he ended up spotting this issue. When
implemented correctly these paths with incorrect misalignment would
just mean a performance penalty, but given that we are dealing with
alternatives on modules and with the __bug_table (where info regardign
BUG()/WARN() file/line information associated with it is stored) this
really shouldn't be a big deal.
The only other change with mentioning is the kmap() with
kmap_local_page() and my only concern with that was on what is done
after preemption, but the virtual addresses are restored after
preemption. This is only used on module decompression.
This all has sit on linux-next for a while except the kmap stuff which
has been there for 3 weeks"
* tag 'modules-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Replace kmap() with kmap_local_page()
module: Show the last unloaded module's taint flag(s)
module: Use strscpy() for last_unloaded_module
module: Modify module_flags() to accept show_state argument
module: Move module's Kconfig items in kernel/module/
MAINTAINERS: Update file list for module maintainers
module: Use vzalloc() instead of vmalloc()/memset(0)
modules: Ensure natural alignment for .altinstructions and __bug_table sections
module: Increase readability of module_kallsyms_lookup_name()
module: Fix ERRORs reported by checkpatch.pl
module: Add support for default value for module async_probe
|
||
|
Linus Torvalds
|
eb5699ba31 |
Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9 kwS/13j38guulSlXRzDLmitbg81zAAI= =Zfum -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ... |
||
|
Linus Torvalds
|
b6bb70f9ab |
Several core optimizations:
* threadgroup_rwsem write locking is skipped when configuring controllers in
empty subtrees. Combined with CLONE_INTO_CGROUP, this allows the common
static usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
* threadgroup_rwsem used to be put into non-percpu mode by default due to
latency concerns in specific use cases. There's no reason for everyone
else to pay for it. Make the behavior optional.
* psi no longer allocates memory when disabled.
along with some code cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYugHIQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd+oAP9lfD3fTRdNo4qWV2VsZsYzoOxzNIuJSwN/dnYx
IEbQOwD/cd2YMfeo6zcb427U/VfTFqjJjFK04OeljYtJU8fFywo=
=sucy
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Several core optimizations:
- threadgroup_rwsem write locking is skipped when configuring
controllers in empty subtrees.
Combined with CLONE_INTO_CGROUP, this allows the common static
usage pattern to not grab threadgroup_rwsem at all (glibc still
doesn't seem ready for CLONE_INTO_CGROUP unfortunately).
- threadgroup_rwsem used to be put into non-percpu mode by default
due to latency concerns in specific use cases. There's no reason
for everyone else to pay for it. Make the behavior optional.
- psi no longer allocates memory when disabled.
... along with some code cleanups"
* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Skip subtree root in cgroup_update_dfl_csses()
cgroup: remove "no" prefixed mount options
cgroup: Make !percpu threadgroup_rwsem operations optional
cgroup: Add "no" prefixed mount options
cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
psi: dont alloc memory for psi by default
|
||
|
Linus Torvalds
|
aad26f55f4 |
This was a moderately busy cycle for documentation, but nothing all that
earth-shaking:
- More Chinese translations, and an update to the Italian translations.
The Japanese, Korean, and traditional Chinese translations are
more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document, with the
movement of what useful material that remained into other docs.
- Improvements to sphinx-pre-install to, hopefully, give more useful
suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn
WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0
+C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw
PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP
Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme
Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0=
=83BG
-----END PGP SIGNATURE-----
Merge tag 'docs-6.0' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
|
||
|
Linus Torvalds
|
7d9d077c78 |
RCU pull request for v5.20 (or whatever)
This pull request contains the following branches: doc.2022.06.21a: Documentation updates. fixes.2022.07.19a: Miscellaneous fixes. nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms. poll.2022.07.21a: Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods. rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead. torture.2022.06.21a: Torture-test updates. ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r vX60+QNxvUBLwA== =vUNm -----END PGP SIGNATURE----- Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ... |
||
|
Linus Torvalds
|
c2a24a7a03 |
This update includes the following changes:
API: - Make proc files report fips module name and version. Algorithms: - Move generic SHA1 code into lib/crypto. - Implement Chinese Remainder Theorem for RSA. - Remove blake2s. - Add XCTR with x86/arm64 acceleration. - Add POLYVAL with x86/arm64 acceleration. - Add HCTR2. - Add ARIA. Drivers: - Add support for new CCP/PSP device ID in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmLosAAACgkQxycdCkmx i6dvgxAAzcw0cKMuq3dbQamzeVu1bDW8rPb7yHnpXal3ao5ewa15+hFjsKhdh/s3 cjM5Lu7Qx4lnqtsh2JVSU5o2SgEpptxXNfxAngcn46ld5EgV/G4DYNKuXsatMZ2A erCzXqG9dDxJmREat+5XgVfD1RFVsglmEA/Nv4Rvn+9O4O6PfwRa8GyUzeKC+byG qs/1JyiPqpyApgzCvlQFAdTF4PM7ruDtg3mnMy2EKAzqj4JUseXRi1i81vLVlfBL T40WESG/CnOwIF5MROhziAtkJMS4Y4v2VQ2++1p0gwG6pDCnq4w7u9cKPXYfNgZK fMVCxrNlxIH3W99VfVXbXwqDSN6qEZtQvhnliwj9aEbEltIoH+B02wNfS/BDsTec im+5NCnNQ6olMPyL0yHrMKisKd+DwTrEfYT5H2kFhcdcYZncQ9C6el57kimnJRzp 4ymPRudCKm/8weWGTtmjFMi+PFP4LgvCoR+VMUd+gVe91F9ZMAO0K7b5z5FVDyDf wmsNBvsEnTdm/r7YceVzGwdKQaP9sE5wq8iD/yySD1PjlmzZos1CtCrqAIT/v2RK pQdZCIkT8qCB+Jm03eEd4pwjEDnbZdQmpKt4cTy0HWIeLJVG1sXPNpgwPCaBEV4U g0nctILtypChlSDmuGhTCyuElfMg6CXt4cgSZJTBikT+QcyWOm4= =rfWK -----END PGP SIGNATURE----- Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Make proc files report fips module name and version Algorithms: - Move generic SHA1 code into lib/crypto - Implement Chinese Remainder Theorem for RSA - Remove blake2s - Add XCTR with x86/arm64 acceleration - Add POLYVAL with x86/arm64 acceleration - Add HCTR2 - Add ARIA Drivers: - Add support for new CCP/PSP device ID in ccp" * tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits) crypto: tcrypt - Remove the static variable initialisations to NULL crypto: arm64/poly1305 - fix a read out-of-bound crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps crypto: hisilicon/sec - fix auth key size error crypto: ccree - Remove a useless dma_supported() call crypto: ccp - Add support for new CCP/PSP device ID crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq crypto: testmgr - some more fixes to RSA test vectors cyrpto: powerpc/aes - delete the rebundant word "block" in comments hwrng: via - Fix comment typo crypto: twofish - Fix comment typo crypto: rmd160 - fix Kconfig "its" grammar crypto: keembay-ocs-ecc - Drop if with an always false condition Documentation: qat: rewrite description Documentation: qat: Use code block for qat sysfs example crypto: lib - add module license to libsha1 crypto: lib - make the sha1 library optional crypto: lib - move lib/sha1.c into lib/crypto/ crypto: fips - make proc files report fips module name and version ... |
||
Baruch Siach
|
bdf0fe33a4 |
init/Kconfig: update KALLSYMS_ALL help text
CONFIG_KALLSYMS_ALL is required for kernel live patching which is a common use case that is enabled in some major distros. Update the Kconfig help text to reflect that. While at it, s/e.g./i.e./ to match the text intention. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Nick Desaulniers
|
a6036a41bf |
kbuild: drop support for CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3
The difference in most compilers between `-O3` and `-O2` is mostly down to whether loops with statically determinable trip counts are fully unrolled vs unrolled to a multiple of SIMD width. This patch is effectively a revert of commit |
||
Tejun Heo
|
6a010a49b6 |
cgroup: Make !percpu threadgroup_rwsem operations optional
|
||
Paul E. McKenney
|
34bc7b454d |
Merge branch 'ctxt.2022.07.05a' into HEAD
ctxt.2022.07.05a: Linux-kernel memory model development branch. |
||
Dan Moulding
|
5a704629f2 |
init: add "hostname" kernel parameter
The gethostname system call returns the hostname for the current machine. However, the kernel has no mechanism to initially set the current machine's name in such a way as to guarantee that the first userspace process to call gethostname will receive a meaningful result. It relies on some unspecified userspace process to first call sethostname before gethostname can produce a meaningful name. Traditionally the machine's hostname is set from userspace by the init system. The init system, in turn, often relies on a configuration file (say, /etc/hostname) to provide the value that it will supply in the call to sethostname. Consequently, the file system containing /etc/hostname usually must be available before the hostname will be set. There may, however, be earlier userspace processes that could call gethostname before the file system containing /etc/hostname is mounted. Such a process will get some other, likely meaningless, name from gethostname (such as "(none)", "localhost", or "darkstar"). A real-world example where this can happen, and lead to undesirable results, is with mdadm. When assembling arrays, mdadm distinguishes between "local" arrays and "foreign" arrays. A local array is one that properly belongs to the current machine, and a foreign array is one that is (possibly temporarily) attached to the current machine, but properly belongs to some other machine. To determine if an array is local or foreign, mdadm may compare the "homehost" recorded on the array with the current hostname. If mdadm is run before the root file system is mounted, perhaps because the root file system itself resides on an md-raid array, then /etc/hostname isn't yet available and the init system will not yet have called sethostname, causing mdadm to incorrectly conclude that all of the local arrays are foreign. Solving this problem *could* be delegated to the init system. It could be left up to the init system (including any init system that starts within an initramfs, if one is in use) to ensure that sethostname is called before any other userspace process could possibly call gethostname. However, it may not always be obvious which processes could call gethostname (for example, udev itself might not call gethostname, but it could via udev rules invoke processes that do). Additionally, the init system has to ensure that the hostname configuration value is stored in some place where it will be readily accessible during early boot. Unfortunately, every init system will attempt to (or has already attempted to) solve this problem in a different, possibly incorrect, way. This makes getting consistently working configurations harder for users. I believe it is better for the kernel to provide the means by which the hostname may be set early, rather than making this a problem for the init system to solve. The option to set the hostname during early startup, via a kernel parameter, provides a simple, reliable way to solve this problem. It also could make system configuration easier for some embedded systems. [dmoulding@me.com: v2] Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.com Signed-off-by: Dan Moulding <dmoulding@me.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Eric Biggers
|
ec8f7f4821 |
crypto: lib - make the sha1 library optional
Since the Linux RNG no longer uses sha1_transform(), the SHA-1 library is no longer needed unconditionally. Make it possible to build the Linux kernel without the SHA-1 library by putting it behind a kconfig option, and selecting this new option from the kconfig options that gate the remaining users: CRYPTO_SHA1 for crypto/sha1_generic.c, BPF for kernel/bpf/core.c, and IPV6 for net/ipv6/addrconf.c. Unfortunately, since BPF is selected by NET, for now this can only make a difference for kernels built without networking support. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Christophe Leroy
|
73b4fc92f9 |
module: Move module's Kconfig items in kernel/module/
In init/Kconfig, the part dedicated to modules is quite large. Move it into a dedicated Kconfig in kernel/module/ MODULES_TREE_LOOKUP was outside of the 'if MODULES', but as it is only used when MODULES are set, move it in with everything else to avoid confusion. MODULE_SIG_FORMAT is left in init/Kconfig because this configuration item is not used in kernel/modules/ but in kernel/ and can be selected independently from CONFIG_MODULES. It is for instance selected from security/integrity/ima/Kconfig. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
Mauro Carvalho Chehab
|
c02b872a7c |
Documentation: update watch_queue.rst references
Changeset |
||
GONG, Ruiqi
|
375561bd61 |
stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
Fix the following Sparse warnings that got noticed when the PPC-dev
patchwork was checking another patch (see the link below):
init/main.c:862:1: warning: symbol 'randomize_kstack_offset' was not declared. Should it be static?
init/main.c:864:1: warning: symbol 'kstack_offset' was not declared. Should it be static?
Which in fact are triggered on all architectures that have
HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET support (for instances x86, arm64
etc).
Link: https://lore.kernel.org/lkml/e7b0d68b-914d-7283-827c-101988923929@huawei.com/T/#m49b2d4490121445ce4bf7653500aba59eefcb67f
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Fixes:
|
||
Frederic Weisbecker
|
24a9c54182 |
context_tracking: Split user tracking Kconfig
Context tracking is going to be used not only to track user transitions but also idle/IRQs/NMIs. The user tracking part will then become a separate feature. Prepare Kconfig for that. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> |
||
|
Paul E. McKenney
|
434c9eefb9 |
rcu-tasks: Add data structures for lightweight grace periods
This commit adds fields to task_struct and to rcu_tasks_percpu that will be used to avoid the task-list scan for RCU Tasks Trace grace periods, and also initializes these fields. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: KP Singh <kpsingh@kernel.org> |
||
|
Linus Torvalds
|
f0be87c42c |
gcc-12: disable '-Warray-bounds' universally for now
In commit
|
||
|
Linus Torvalds
|
1ec6574a3c |
This set of changes updates init and user mode helper tasks to be
ordinary user mode tasks. In commit |
||
|
Linus Torvalds
|
35b51afd23 |
RISC-V Patches for the 5.19 Merge Window, Part 1
* Support for the Svpbmt extension, which allows memory attributes to be encoded in pages. * Support for the Allwinner D1's implementation of page-based memory attributes. * Support for running rv32 binaries on rv64 systems, via the compat subsystem. * Support for kexec_file(). * Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well. * A handful of cleanups and fixes, include some larger ones around atomics and XIP. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmKWOx8THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYieAiEADAUdP7ctoaSQwk5skd/fdA3b4KJuKn 1Zjl+Br32WP0DlbirYBYWRUQZnCCsvABbTiwSJMcG7NBpU5pyQ5XDtB3OA5kJswO Fdp8Nd53//+GK1M5zdEM9OdgvT9fbfTZ3qTu8bKsROOQhGwnYL+Csc9KjFRqEmzN oQii0jlb3n5PM4FL3GsbV4uMn9zzkP9mnVAPQktcock2EKFEK/Fy3uNYMQiO2KPi n8O6bIDaeRdQ6SurzWOuOkt0cro0tEF85ilzT04mynQsOU0el5oGqCxnOhNH3VWg ndqPT6Yafw12hZOtbKJeP+nF8IIR6aJLP3jOtRwEVgcfbXYAw4QwbAV8kQZISefN ipn8JGY7GX9Y9TYU692OUGkcmAb3/dxb6c0WihBdvJ0M6YyLD5X+YKHNuG2onLgK ss43C5Mxsu629rsjdu/PV91B1+pve3rG9siVmF+g4eo0x9rjMq6/JB0Kal/8SLI1 Je5T55d5ujV1a2XxhZLQOSD5owrK7J1M9owb0bloTnr9nVwFTWDrfEQEU82o3kP+ Xm+FfXktnz9ai55NjkMbbEur5D++dKJhBavwCTnBcTrJmMtEH0R45GTK9ZehP+WC rNVrRXjIsS18wsTfJxnkZeFQA38as6VBKTzvwHvOgzTrrZU1/xk3lpkouYtAO6BG gKacHshVilmUuA== =Loi6 -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the Svpbmt extension, which allows memory attributes to be encoded in pages - Support for the Allwinner D1's implementation of page-based memory attributes - Support for running rv32 binaries on rv64 systems, via the compat subsystem - Support for kexec_file() - Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well - A handful of cleanups and fixes, include some larger ones around atomics and XIP * tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add] riscv: compat: Using seperated vdso_maps for compat_vdso_info RISC-V: Fix the XIP build RISC-V: Split out the XIP fixups into their own file RISC-V: ignore xipImage RISC-V: Avoid empty create_*_mapping definitions riscv: Don't output a bogus mmu-type on a no MMU kernel riscv: atomic: Add custom conditional atomic operation implementation riscv: atomic: Optimize dec_if_positive functions riscv: atomic: Cleanup unnecessary definition RISC-V: Load purgatory in kexec_file RISC-V: Add purgatory RISC-V: Support for kexec_file on panic RISC-V: Add kexec_file support RISC-V: use memcpy for kexec_file mode kexec_file: Fix kexec_file.c build error for riscv platform riscv: compat: Add COMPAT Kbuild skeletal support riscv: compat: ptrace: Add compat_arch_ptrace implement riscv: compat: signal: Add rt_frame implementation riscv: add memory-type errata for T-Head ... |
||
|
Linus Torvalds
|
76bfd3de34 |
tracing updates for 5.19:
- The majority of the changes are for fixes and clean ups.
Noticeable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to having it
embedded in initram). This is useful for embedded boards without initram
disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use more than
59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset>
instead of using the name of the function before it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOgXRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjkKAQDbpemxvpFyJlZqT8KgEIXubu+ag2/q
p0XDHaPS0zF9OQEAjTxg6GMEbnFYl6fzxZtOoEbiaQ7ppfdhRI8t6sSMVA8=
=+nDD
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
|
||
|
Linus Torvalds
|
8291eaafed |
Two followon fixes for the post-5.19 series "Use pageblock_order for cma
and alloc_contig_range alignment", from Zi Yan.
A series of z3fold cleanups and fixes from Miaohe Lin.
Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
Some swap fixes and cleanups from Miaohe Lin.
Several individual minor fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpEE7QAKCRDdBJ7gKXxA
jlamAP9WmjNdx+5Pz5OkkaSjBO7y7vBrBTcQ9e5pz8bUWRoQhwEA+WtsssLmq9aI
7DBDmBKYCMTbzOQTqaMRHkB+JWZo+Ao=
=L3f1
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Two follow-on fixes for the post-5.19 series "Use pageblock_order for
cma and alloc_contig_range alignment", from Zi Yan.
- A series of z3fold cleanups and fixes from Miaohe Lin.
- Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
- Some swap fixes and cleanups from Miaohe Lin
- Several individual minor fixups
* tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm/shmem.c: suppress shift warning
mm: Kconfig: reorganize misplaced mm options
mm: kasan: fix input of vmalloc_to_page()
mm: fix is_pinnable_page against a cma page
mm: filter out swapin error entry in shmem mapping
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
mm/swapfile: fix lost swap bits in unuse_pte()
mm/swapfile: unuse_pte can map random data if swap read fails
selftests: memcg: factor out common parts of memory.{low,min} tests
selftests: memcg: remove protection from top level memcg
selftests: memcg: adjust expected reclaim values of protected cgroups
selftests: memcg: expect no low events in unprotected sibling
selftests: memcg: fix compilation
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
...
|
||
|
Linus Torvalds
|
6f664045c8 |
Not a lot of material this cycle. Many singleton patches against various
subsystems. Most notably some maintenance work in ocfs2 and initramfs. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx xSZypNhj2n9f8FCYca/ZrZneBsTnAA8= =AJEO -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "The non-MM patch queue for this merge window. Not a lot of material this cycle. Many singleton patches against various subsystems. Most notably some maintenance work in ocfs2 and initramfs" * tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits) kcov: update pos before writing pc in trace function ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock fs/ntfs: remove redundant variable idx fat: remove time truncations in vfat_create/vfat_mkdir fat: report creation time in statx fat: ignore ctime updates, and keep ctime identical to mtime in memory fat: split fat_truncate_time() into separate functions MAINTAINERS: add Muchun as a memcg reviewer proc/sysctl: make protected_* world readable ia64: mca: drop redundant spinlock initialization tty: fix deadlock caused by calling printk() under tty_port->lock relay: remove redundant assignment to pointer buf fs/ntfs3: validate BOOT sectors_per_clusters lib/string_helpers: fix not adding strarray to device's resource list kernel/crash_core.c: remove redundant check of ck_cmdline ELF, uapi: fixup ELF_ST_TYPE definition ipc/mqueue: use get_tree_nodev() in mqueue_get_tree() ipc: update semtimedop() to use hrtimer ipc/sem: remove redundant assignments ... |
||
Vlastimil Babka
|
0710d0122a |
mm: Kconfig: reorganize misplaced mm options
After commits |
||
|
Linus Torvalds
|
ef98f9cfe2 |
Modules updates for v5.19-rc1
As promised, for v5.19 I queued up quite a bit of work for modules, but
still with a pretty conservative eye. These changes have been soaking on
modules-next (and so linux-next) for quite some time, the code shift was
merged onto modules-next on March 22, and the last patch was queued on May
5th.
The following are the highlights of what bells and whistles we will get for
v5.19:
1) It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any
functional at all during that endeavour. The penalty for the split
is +1322 bytes total, +112 bytes in data, +1210 bytes in text while
bss is unchanged. One of the benefits of this other than helping
make the code easier to read and review is summoning more help on review
for changes with livepatching so kernel/module/livepatch.c is now
pegged as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
2) Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
so to enable tracking unloaded modules which did taint the kernel.
3) Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to protect
against execution on a page basis. The exec stuff can be mapped by
different arch segment sizes (on book3s/32 that is 256M segments). By
default the module area is in an Exec segment while vmalloc area is in
a NoExec segment. Using vmalloc lets you muck with module data as
NoExec on those architectures whereas before you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some
security enhancements to set this as NoExec on free, and splitting
module data with text let's future generic special allocators
be added to the kernel without having developers try to grok
the tribal knowledge per arch. Work like Rick Edgecombe's
permission vmalloc interface [0] becomes easier to address over
time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
4) Masahiro Yamada's symbol search enhancements
-----BEGIN PGP SIGNATURE-----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=cxtr
-----END PGP SIGNATURE-----
Merge tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
- It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any functional
at all during that endeavour. The penalty for the split is +1322
bytes total, +112 bytes in data, +1210 bytes in text while bss is
unchanged. One of the benefits of this other than helping make the
code easier to read and review is summoning more help on review for
changes with livepatching so kernel/module/livepatch.c is now pegged
as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
- Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
to enable tracking unloaded modules which did taint the kernel.
- Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to
protect against execution on a page basis. The exec stuff can be
mapped by different arch segment sizes (on book3s/32 that is 256M
segments). By default the module area is in an Exec segment while
vmalloc area is in a NoExec segment. Using vmalloc lets you muck
with module data as NoExec on those architectures whereas before
you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some security
enhancements to set this as NoExec on free, and splitting module
data with text let's future generic special allocators be added
to the kernel without having developers try to grok the tribal
knowledge per arch. Work like Rick Edgecombe's permission vmalloc
interface [0] becomes easier to address over time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
- Masahiro Yamada's symbol search enhancements
* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
module: merge check_exported_symbol() into find_exported_symbol_in_section()
module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
module: do not pass opaque pointer for symbol search
module: show disallowed symbol name for inherit_taint()
module: fix [e_shstrndx].sh_size=0 OOB access
module: Introduce module unload taint tracking
module: Move module_assert_mutex_or_preempt() to internal.h
module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
module.h: simplify MODULE_IMPORT_NS
powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
module: Remove module_addr_min and module_addr_max
module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: Introduce data_layout
module: Prepare for handling several RB trees
module: Always have struct mod_tree_root
module: Rename debug_align() as strict_align()
module: Rework layout alignment to avoid BUG_ON()s
module: Move module_enable_x() and frob_text() in strict_rwx.c
module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
module: Move version support into a separate file
...
|
||
|
Linus Torvalds
|
44d35720c9 |
sysctl changes for v5.19-rc1
For two kernel releases now kernel/sysctl.c has been being cleaned up slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and all this caused merge conflicts with one susbystem or another. This tree was put together to help try to avoid conflicts with these cleanups going on different trees at time. So nothing exciting on this pull request, just cleanups. I actually had this sysctl-next tree up since v5.18 but I missed sending a pull request for it on time during the last merge window. And so these changes have been being soaking up on sysctl-next and so linux-next for a while. The last change was merged May 4th. Most of the compile issues were reported by 0day and fixed. To help avoid a conflict with bpf folks at Daniel Borkmann's request I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which moves the BPF sysctls from kernel/sysctl.c to BPF core. Possible merge conflicts and known resolutions as per linux-next: bfp: https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au rcu: https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au powerpc: https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOq8ASHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinDAkQAJVo5YVM9f74UwYp4PQhTpjxJBCjRoZD z1u9bp5rMj2ujTC8Fr7VmzKaHrb8+r1C1WvCvZtIzemYNB4lZUrHpVDYfXuXiPRB ihPmEjhlPO5PFBx6cVCpI3cu9bEhG00rLc1QXnABx/pXwNPcOTJAGZJVamZvqubk chjgZrb7N+adHPfvS55v1+zpwdeKfpp5U3zuu5qlT/nn0GS0HCVzOj5fj4oC4wtJ IqfUubo+FX50Ga58yQABWNrjaPD9Crykz5ohVazy3ElQl0hJ4VsK65ct3blqc2vz 1Bb8kPpWuv6aZ5nr1lCVE8qvF4ZIL33ySvpg5BSdWLQEDrBbSpzvJe9Yn7wgR+eq y7fhpO24+zRM82EoDMEvyxX9u1n1RsvoXRtf3ds9BGf63MUxk8a1cgjlU6vuyO2U JhDmfM1xzdKvPoY4COOnHzcAiIqzItTqKd09N5y0cahmYstROU8lvp9huhTAHqk1 SjQMbLIZG7OnX8ZeQcR1EB8sq/IOPZT48ejj0iJmQ8FyMaep71MOQLYyLPAq4lgh JHXm8P6QdB57jfJbqAeNSyZoK0qdxOUR/83Zcah7Jjns6vkju1DNatEsaEEI2y2M 4n7/rkHeZ3TyFHBUX4e9FomKvGLsAalDBRiqsuxLSOPMU8rGrNLAslOAtKwvp90X 4ht3M2VP098l =btwh -----END PGP SIGNATURE----- Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "For two kernel releases now kernel/sysctl.c has been being cleaned up slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and all this caused merge conflicts with one susbystem or another. This tree was put together to help try to avoid conflicts with these cleanups going on different trees at time. So nothing exciting on this pull request, just cleanups. Thanks a lot to the Uniontech and Huawei folks for doing some of this nasty work" * tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits) sched: Fix build warning without CONFIG_SYSCTL reboot: Fix build warning without CONFIG_SYSCTL kernel/kexec_core: move kexec_core sysctls into its own file sysctl: minor cleanup in new_dir() ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n fs/proc: Introduce list_for_each_table_entry for proc sysctl mm: fix unused variable kernel warning when SYSCTL=n latencytop: move sysctl to its own file ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y ftrace: Fix build warning ftrace: move sysctl_ftrace_enabled to ftrace.c kernel/do_mount_initrd: move real_root_dev sysctls to its own file kernel/delayacct: move delayacct sysctls to its own file kernel/acct: move acct sysctls to its own file kernel/panic: move panic sysctls to its own file kernel/lockdep: move lockdep sysctls to its own file mm: move page-writeback sysctls to their own file mm: move oom_kill sysctls to their own file kernel/reboot: move reboot sysctls to its own file sched: Move energy_aware sysctls to topology.c ... |
||
|
Linus Torvalds
|
bf9095424d |
S390:
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
||
|
Linus Torvalds
|
98931dd95f |
Yang Shi has improved the behaviour of khugepaged collapsing of readonly
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
||
|
Linus Torvalds
|
df202b452f |
Kbuild updates for v5.19
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmKOO2oVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGG54P/3/U5FIP5EoPAVu9HqSUKeeUiBYc
z1B8d7Wt1xU0xHImPWNjoacfye4MrDMUv8mEWKgHCVusJxbUoS+3Z/kd64NU75Fg
Cpj+9fP1N8m02IJzraxn6fw0bmfx4zp9Zsa9l2fjwL0emq4qhB7BA9/Nl6Png1IW
p0TPR6gV0Wgp6ikf/eJ3b1decFSqM7QzDlbo860nPMG164gNpDZmFVf2G4HCRQoY
GtgoQLEy2pBeOdU7+nJTKl2f5JOhDjRKX8equ7BHW9l7nbUvHd6ys3DGqYO3nvwV
hZZdHwDtxxO6bJtzClKPREyfL2H9R2AGxq94HzSwdvwdLLoFxrTN+mg88xBg17Rm
tKHy8jpZT36qh218h5lX5n9ZWcovTA38giZ+S/tkwOvvYGivKHDS23QwzB0HrG8/
VRd+0rhfIvuIpu0OQaTpTkZr2QVci2Zn6PPnxpyPEsGvWVFRjyx0WyZh4fFXnkQT
n+GS7j5g1LVMra0qu0y+yp4zy/DVFKIcfry0xU8S5SaSEBBcWUxLS2nnoBVB4vb2
RpiVD2vaOlvu/Zs2SOgtuMOnTw+Qqrvh7OYm/WyxWrB3JQGa/r+vipMKiFEDi2NN
pwR8wJT/CW1ycte93m3oO83jiitFqzXtAqo24wKlp4SOqnR/TQ/dx743ku2xvONe
uynJVW/gZVm4KEUl
=Y2TB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
||
|
Linus Torvalds
|
16477cdfef |
asm-generic changes for 5.19
The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
|
||
|
Linus Torvalds
|
2e17ce1106 |
slab changes for 5.19
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmKLUYoACgkQ4CHKc/GJ
qRCMFwf/Tm1cf2JLUANrT58rjkrrj15EtKhnJdm5/yvmsWKps7WKPP4jeUHe+NTO
NovAGt67lG1l6LMLczZkWckOkWlyYjC42CPDLdxRUkk+zQRb3nRA8Nbt6VTNBOfQ
0wTLOqXgsNXdSPSVUsKGL8kIAHNQTMX+7TjO6s7CXy/5Qag6r1iZX2HZxASOHxLa
yYzaJ9pJRZBAMGnzV6L6v0J8KPnjYO0fB68S1qYQTbhoRxchtFF+0AIr1JydGgBI
9RFUowTrSpJkZtcSjabopvZz4JfCRDP+eAxkyw13feji7MG1FMX74HgDdw+HhzTv
R2/6iA5WcsmzcXopsfMx8lUP/KIfPw==
=gnSc
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Conversion of slub_debug stack traces to stackdepot, allowing more
useful debugfs-based inspection for e.g. memory leak debugging.
Allocation and free debugfs info now includes full traces and is
sorted by the unique trace frequency.
The stackdepot conversion was already attempted last year but
reverted by
|
||
Masahiro Yamada
|
7b4537199a |
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
include/{linux,asm-generic}/export.h defines a weak symbol, __crc_*
as a placeholder.
Genksyms writes the version CRCs into the linker script, which will be
used for filling the __crc_* symbols. The linker script format depends
on CONFIG_MODULE_REL_CRCS. If it is enabled, __crc_* holds the offset
to the reference of CRC.
It is time to get rid of this complexity.
Now that modpost parses text files (.*.cmd) to collect all the CRCs,
it can generate C code that will be linked to the vmlinux or modules.
Generate a new C file, .vmlinux.export.c, which contains the CRCs of
symbols exported by vmlinux. It is compiled and linked to vmlinux in
scripts/link-vmlinux.sh.
Put the CRCs of symbols exported by modules into the existing *.mod.c
files. No additional build step is needed for modules. As before,
*.mod.c are compiled and linked to *.ko in scripts/Makefile.modfinal.
No linker magic is used here. The new C implementation works in the
same way, whether CONFIG_RELOCATABLE is enabled or not.
CONFIG_MODULE_REL_CRCS is no longer needed.
Previously, Kbuild invoked additional $(LD) to update the CRCs in
objects, but this step is unneeded too.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
|
||
Johannes Weiner
|
7b42f1041c |
mm: Kconfig: move swap and slab config options to the MM section
These are currently under General Setup. MM seems like a better fit. Link: https://lkml.kernel.org/r/20220510152847.230957-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Jason A. Donenfeld
|
2f14062bb1 |
random: handle latent entropy and command line from random_init()
Currently, start_kernel() adds latent entropy and the command line to the entropy bool *after* the RNG has been initialized, deferring when it's actually used by things like stack canaries until the next time the pool is seeded. This surely is not intended. Rather than splitting up which entropy gets added where and when between start_kernel() and random_init(), just do everything in random_init(), which should eliminate these kinds of bugs in the future. While we're at it, rename the awkwardly titled "rand_initialize()" to the more standard "random_init()" nomenclature. Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Jason A. Donenfeld
|
fe222a6ca2 |
init: call time_init() before rand_initialize()
Currently time_init() is called after rand_initialize(), but rand_initialize() makes use of the timer on various platforms, and sometimes this timer needs to be initialized by time_init() first. In order for random_get_entropy() to not return zero during early boot when it's potentially used as an entropy source, reverse the order of these two calls. The block doing random initialization was right before time_init() before, so changing the order shouldn't have any complicated effects. Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Peter Xu
|
430529b5c6 |
mm/uffd: move USERFAULTFD configs into mm/
We used to have USERFAULTFD configs stored in init/. It makes sense as a start because that's the default place for storing syscall related configs. However userfaultfd evolved a bit in the past few years and some more config options were added. They're no longer related to syscalls and start to be not suitable to be kept in the init/ directory anymore, because they're pure mm concepts. But it's not ideal either to keep the userfaultfd configs separate from each other. Hence this patch moves the userfaultfd configs under init/ to be under mm/ so that we'll start to group all userfaultfd configs together. We do have quite a few examples of syscall related configs that are not put under init/Kconfig: FTRACE_SYSCALLS, SWAP, FILE_LOCKING, MEMFD_CREATE.. They all reside in the dir where they're more suitable for the concept. So it seems there's no restriction to keep the role of having syscall related CONFIG_* under init/ only. Link: https://lkml.kernel.org/r/20220420144823.35277-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Aaron Tomlin
|
99bd995655 |
module: Introduce module unload taint tracking
Currently, only the initial module that tainted the kernel is recorded e.g. when an out-of-tree module is loaded. The purpose of this patch is to allow the kernel to maintain a record of each unloaded module that taints the kernel. So, in addition to displaying a list of linked modules (see print_modules()) e.g. in the event of a detected bad page, unloaded modules that carried a taint/or taints are displayed too. A tainted module unload count is maintained. The number of tracked modules is not fixed. This feature is disabled by default. Signed-off-by: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
David Disseldorp
|
800c24dc34 |
initramfs: support cpio extraction with file checksums
Add support for extraction of checksum-enabled "070702" cpio archives, specified in Documentation/driver-api/early-userspace/buffer-format.rst. Fail extraction if the calculated file data checksum doesn't match the value carried in the header. Link: https://lkml.kernel.org/r/20220404093429.27570-7-ddiss@suse.de Signed-off-by: David Disseldorp <ddiss@suse.de> Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Martin Wilck <mwilck@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Disseldorp
|
1274aea127 |
initramfs: add INITRAMFS_PRESERVE_MTIME Kconfig option
initramfs cpio mtime preservation, as implemented in commit
|
||
|
David Disseldorp
|
fcb7aedd2e |
initramfs: make dir_entry.name a flexible array member
dir_entry.name is currently allocated via a separate kstrdup(). Change it to a flexible array member and allocate it along with struct dir_entry. Link: https://lkml.kernel.org/r/20220404093429.27570-3-ddiss@suse.de Signed-off-by: David Disseldorp <ddiss@suse.de> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Martin Wilck <mwilck@suse.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Disseldorp
|
da028e4c4b |
initramfs: refactor do_header() cpio magic checks
Patch series "initramfs: "crc" cpio format and INITRAMFS_PRESERVE_MTIME", v7. This patchset does some minor initramfs refactoring and allows cpio entry mtime preservation to be disabled via a new Kconfig INITRAMFS_PRESERVE_MTIME option. Patches 4/6 to 6/6 implement support for creation and extraction of "crc" cpio archives, which carry file data checksums. Basic tests for this functionality can be found at https://github.com/rapido-linux/rapido/pull/163 This patch (of 6): do_header() is called for each cpio entry and fails if the first six bytes don't match "newc" magic. The magic check includes a special case error message if POSIX.1 ASCII (cpio -H odc) magic is detected. This special case POSIX.1 check can be nested under the "newc" mismatch code path to avoid calling memcmp() twice in a non-error case. Link: https://lkml.kernel.org/r/20220404093429.27570-1-ddiss@suse.de Link: https://lkml.kernel.org/r/20220404093429.27570-2-ddiss@suse.de Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Martin Wilck <mwilck@suse.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Eric W. Biederman
|
68d85f0a33 |
init: Deal with the init process being a user mode process
It is silly for user_mode_thread to leave PF_KTHREAD set on the resulting task. Update the init process so that it does not care if PF_KTHREAD is set or not. Ensure do_populate_rootfs flushes all delayed fput work by calling task_work_run. In the rare instance that async_schedule_domain calls do_populate_rootfs synchronously it is possible do_populate_rootfs will be called directly from the init process. At which point fput will call "task_work_add(current, ..., TWA_RESUME)". The files on the initramfs need to be completely put before we attempt to exec them (which is before the code enters userspace). So call task_work_run just in case there are any pending fput operations. Link: https://lkml.kernel.org/r/20220506141512.516114-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
343f4c49f2 |
kthread: Don't allocate kthread_struct for init and umh
If kthread_is_per_cpu runs concurrently with free_kthread_struct the kthread_struct that was just freed may be read from. This bug was introduced by commit |
||
Kees Cook
|
7374fa33dc |
init/Kconfig: remove USELIB syscall by default
The uselib syscall has been long deprecated. There's no need to keep this enabled by default under X86_32. Link: https://lkml.kernel.org/r/20220412212519.4113845-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |