ext4_issue_discard is supposed to be helper for calling discard, however
in case that underlying device does not support discard it prints out
the warning message and clears the DISCARD t_mount_opt flag. Since it
can be (and is) used by others, it should not do anything and let the
caller to handle the error case.
This commit removes warning message and flag setting from
ext4_issue_discard and use it just in place where it is really needed
(release_blocks_on_commit). FITRIM ioctl should not set any flags nor it
should print out warning messages, so get rid of the warning as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
When determining last group through ext4_get_group_no_and_offset() the
result may be wrong in cases when range->start and range-len are too
big, because it may overflow when summing up those two numbers.
Fix that by checking range->len and limit its value to
ext4_blocks_count(). This commit was tested by myself with expected
result.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Using %pV reduces the number of printk calls and eliminates any
possible message interleaving from other printk calls.
In function __ext4_grp_locked_error also added KERN_CONT to some
printks.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When nanosecond timestamp resolution isn't supported on an ext4
partition (inode size = 128), stat() appears to be returning
uninitialized garbage in the nanosecond component of timestamps.
EXT4_INODE_GET_XTIME should zero out tv_nsec when EXT4_FITS_IN_INODE
evaluates to false.
Reported-by: Jordan Russell <jr-list-2010@quo.to>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function gets called a lot for large directories, and the answer
is almost always "no, no, there's no problem". This means using
unlikely() is a good thing.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use advantage of kmem_cache_zalloc() to remove a memset() call in
ext4_init_io_end() and save a few bytes.
Before:
[jj@dragon linux-2.6]$ size fs/ext4/page-io.o
text data bss dec hex filename
3016 0 624 3640 e38 fs/ext4/page-io.o
After:
[jj@dragon linux-2.6]$ size fs/ext4/page-io.o
text data bss dec hex filename
3000 0 624 3624 e28 fs/ext4/page-io.o
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
'buffer_head' should be 'journal_head'
This is a port of a patch which Namhyung Kim <namhyung@gmail.com> made
to fs/jbd to jbd2.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We had an open-coded version of printk_ratelimited(); use the provided
abstraction to make the code cleaner and easier to understand.
Based on a similar patch for fs/jbd from Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes up some broken argument descriptions that Namhyung Kim had
originally submitted for ext3. This fixes the comments that were
still applicable in ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change clear_opt() and set_opt() to take a superblock pointer instead
of a pointer to EXT4_SB(sb)->s_mount_opt. This makes it easier for us
to support a second mount option field.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix typo which broke '..' detection in ext4_find_entry()
ext4: Turn off multiple page-io submission by default
The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.
bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.
$ uname -m
x86_64
$ cat /proc/sys/vm/mmap_min_addr
65536
$ cat install_special_mapping.s
section .bss
resb BSS_SIZE
section .text
global _start
_start:
mov eax, __NR_pause
int 0x80
$ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s
$ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o
$ ./install_special_mapping &
[1] 14303
$ cat /proc/14303/maps
0000f000-00010000 r-xp 00000000 00:00 0 [vdso]
00010000-00011000 r-xp 00001000 00:19 2453665 /home/taviso/install_special_mapping
00011000-ffffe000 rwxp 00000000 00:00 0 [stack]
It's worth noting that Red Hat are shipping with mmap_min_addr set to
4096.
Signed-off-by: Tavis Ormandy <taviso@google.com>
Acked-by: Kees Cook <kees@ubuntu.com>
Acked-by: Robert Swiecki <swiecki@google.com>
[ Changed to not drop the error code - akpm ]
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There should be a check for the NUL character instead of '0'.
Fortunately the only thing that cares about this is NFS serving, which
is why we didn't notice this in the merge window testing.
Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jon Nelson has found a test case which causes postgresql to fail with
the error:
psql:t.sql:4: ERROR: invalid page header in block 38269 of relation base/16384/16581
Under memory pressure, it looks like part of a file can end up getting
replaced by zero's. Until we can figure out the cause, we'll roll
back the change and use block_write_full_page() instead of
ext4_bio_write_page(). The new, more efficient writing function can
be used via the mount option mblk_io_submit, so we can test and fix
the new page I/O code.
To reproduce the problem, install postgres 8.4 or 9.0, and pin enough
memory such that the system just at the end of triggering writeback
before running the following sql script:
begin;
create temporary table foo as select x as a, ARRAY[x] as b FROM
generate_series(1, 10000000 ) AS x;
create index foo_a_idx on foo (a);
create index foo_b_idx on foo USING GIN (b);
rollback;
If the temporary table is created on a hard drive partition which is
encrypted using dm_crypt, then under memory pressure, approximately
30-40% of the time, pgsql will issue the above failure.
This patch should fix this problem, and the problem will come back if
the file system is mounted with the mblk_io_submit mount option.
Reported-by: Jon Nelson <jnelson@jamponi.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix possible BUG_ON firing in set_change_info
sunrpc: prevent use-after-free on clearing XPT_BUSY
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: prevent RAID level downgrades when space is low
Btrfs: account for missing devices in RAID allocation profiles
Btrfs: EIO when we fail to read tree roots
Btrfs: fix compiler warnings
Btrfs: Make async snapshot ioctl more generic
Btrfs: pwrite blocked when writing from the mmaped buffer of the same page
Btrfs: Fix a crash when mounting a subvolume
Btrfs: fix sync subvol/snapshot creation
Btrfs: Fix page leak in compressed writeback path
Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots
Btrfs: fixup return code for btrfs_del_orphan_item
Btrfs: do not do fast caching if we are allocating blocks for tree_root
Btrfs: deal with space cache errors better
Btrfs: fix use after free in O_DIRECT
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: fix ioctl magic
ceph: Behave better when handling file lock replies.
ceph: pass lock information by struct file_lock instead of as individual params.
ceph: Handle file locks in replies from the MDS.
ceph: avoid possible null deref in readdir after dir llseek
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix panic after nfs_umount()
nfs: remove extraneous and problematic calls to nfs_clear_request
nfs: kernel should return EPROTONOSUPPORT when not support NFSv4
NFS: Fix fcntl F_GETLK not reporting some conflicts
nfs: Discard ACL cache on mode update
NFS: Readdir cleanups
NFS: nfs_readdir_search_for_cookie() don't mark as eof if cookie not found
NFS: Fix a memory leak in nfs_readdir
Call the filesystem back whenever a page is removed from the page cache
NFS: Ensure we use the correct cookie in nfs_readdir_xdr_filler
The extent allocator has code that allows us to fill
allocations from any available block group, even if it doesn't
match the raid level we've requested.
This was put in because adding a new drive to a filesystem
made with the default mkfs options actually upgrades the metadata from
single spindle dup to full RAID1.
But, the code also allows us to allocate from a raid0 chunk when we
really want a raid1 or raid10 chunk. This can cause big trouble because
mkfs creates a small (4MB) raid0 chunk for data and metadata which then
goes unused for raid1/raid10 installs.
The allocator will happily wander in and allocate from that chunk when
things get tight, which is not correct.
The fix here is to make sure that we provide duplication when the
caller has asked for it. It does all the dups to be any raid level,
which preserves the dup->raid1 upgrade abilities.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we mount in RAID degraded mode without adding a new device to
replace the failed one, we can end up using the wrong RAID flags for
allocations.
This results in strange combinations of block groups (raid1 in a raid10
filesystem) and corruptions when we try to allocate blocks from single
spindle chunks on drives that are actually missing.
The first device has two small 4MB chunks in it that mkfs creates and
these are usually unused in a raid1 or raid10 setup. But, in -o degraded,
the allocator will fall back to these because the mask of desired raid groups
isn't correct.
The fix here is to count the missing devices as we build up the list
of devices in the system. This count is used when picking the
raid level to make sure we continue using the same levels that were
in place before we lost a drive.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we just get a plain IO error when we read tree roots, the code
wasn't properly sending that error up the chain. This allowed mounts to
continue when they should failed, and allowed operations
on partially setup root structs. The end result was usually oopsen
on spinlocks that hadn't been spun up correctly.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
... regarding an unused function when !MIGRATION, and regarding a
printk() format string vs argument mismatch.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If we had reserved some bytes in struct btrfs_ioctl_vol_args, we
wouldn't have to create a new structure for async snapshot creation.
Here we convert async snapshot ioctl to use a more generic ABI, as
we'll add more ioctls for snapshots/subvolumes in the future, readonly
snapshots for example.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This problem is found in meego testing:
http://bugs.meego.com/show_bug.cgi?id=6672
A file in btrfs is mmaped and the mmaped buffer is passed to pwrite to write to the same page
of the same file. In btrfs_file_aio_write(), the pages is locked by prepare_pages(). So when
btrfs_copy_from_user() is called, page fault happens and the same page needs to be locked again
in filemap_fault(). The fix is to move iov_iter_fault_in_readable() before prepage_pages() to make page
fault happen before pages are locked. And also disable page fault in critical region in
btrfs_copy_from_user().
Reviewed-by: Yan, Zheng<zheng.z.yan@intel.com>
Signed-off-by: Zhong, Xin <xin.zhong@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We should drop dentry before deactivating the superblock, otherwise
we can hit this bug:
BUG: Dentry f349a690{i=100,n=/} still in use (1) [unmount of btrfs loop1]
...
Steps to reproduce the bug:
# mount /dev/loop1 /mnt
# mkdir save
# btrfs subvolume snapshot /mnt save/snap1
# umount /mnt
# mount -o subvol=save/snap1 /dev/loop1 /mnt
(crash)
Reported-by: Michael Niederle <mniederle@gmx.at>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We were incorrectly taking the async path even for the sync ioctls by
passing in &transid unconditionally.
There's ample room for further cleanup here, but this keeps the fix simple.
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
"start + num_bytes >= actual_end" can happen when compressed page writeback races
with file truncation. In that case we need unlock and release pages past the end
of file.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Not being able to delete an orphan item isn't a horrible thing. The worst that
happens is the next time around we try and do the orphan cleanup and we can't
find the referenced object and just delete the item and move on.
Signed-off-by: Josef Bacik <josef@redhat.com>
After a few unsuccessful NFS mount attempts in which the client and
server cannot agree on an authentication flavor both support, the
client panics. nfs_umount() is invoked in the kernel in this case.
Turns out nfs_umount()'s UMNT RPC invocation causes the RPC client to
write off the end of the rpc_clnt's iostat array. This is because the
mount client's nrprocs field is initialized with the count of defined
procedures (two: MNT and UMNT), rather than the size of the client's
proc array (four).
The fix is to use the same initialization technique used by most other
upper layer clients in the kernel.
Introduced by commit 0b524123, which failed to update nrprocs when
support was added for UMNT in the kernel.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=24302
BugLink: http://bugs.launchpad.net/bugs/683938
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Cc: stable@kernel.org # >= 2.6.32
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that we don't mark VFS inodes dirty anymore for internal
timestamp changes, but rely on the transaction subsystem to push
them out, we need to explicitly log the source inode in rename after
updating it's timestamps to make sure the changes actually get
forced out by sync/fsync or an AIL push.
We already account for the fourth inode in the log reservation, as a
rename of directories needs to update the nlink field, so just
adding the xfs_trans_log_inode call is enough.
This fixes the xfsqa 065 regression introduced by:
"xfs: don't use vfs writeback for pure metadata modifications"
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
If the orphan item doesn't exist, we return 1, which doesn't make any sense to
the callers. Instead return -ENOENT if we didn't find the item. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Since the fast caching uses normal tree locking, we can possibly deadlock if we
get to the caching via a btrfs_search_slot() on the tree_root. So just check to
see if the root we are on is the tree root, and just don't do the fast caching.
Reported-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josef Bacik <josef@redhat.com>
Currently if the space cache inode generation number doesn't match the
generation number in the space cache header we will just fail to load the space
cache, but we won't mark the space cache as an error, so we'll keep getting that
error each time somebody tries to cache that block group until we actually clear
the thing. Fix this by marking the space cache as having an error so we only
get the message once. This patch also makes it so that we don't try and setup
space cache for a block group that isn't cached, since we won't be able to write
it out anyway. None of these problems are actual problems, they are just
annoying and sub-optimal. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This fixes a bug where we use dip after we have freed it. Instead just use the
file_offset that was passed to the function. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
