forked from Minki/linux
1f02efd1bb
2158 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Randy Dunlap
|
87dbc209ea |
local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
e2ae634014 |
RISC-V Patches for the 5.11 Merge Window, Part 1
We have a handful of new kernel features for 5.11: * Support for the contiguous memory allocator. * Support for IRQ Time Accounting * Support for stack tracing * Support for strict /dev/mem * Support for kernel section protection I'm being a bit conservative on the cutoff for this round due to the timing, so this is all the new development I'm going to take for this cycle (even if some of it probably normally would have been OK). There are, however, some fixes on the list that I will likely be sending along either later this week or early next week. There is one issue in here: one of my test configurations (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the .text.init alignment patch. With any luck we'll sort out the issue, but given how many bugs get fixed all over the place and how unrelated those features seem my guess is that we're just running into something that's been lurking for a while and has already been fixed in the newer QEMU (though I wouldn't be surprised if it's one of these implicit assumptions we have in the boot flow). If it was hardware I'd be strongly inclined to look more closely, but given that users can upgrade their simulators I'm less worried about it. There are two merge conflicts, both in build files. They're both a bit clunky: arch/riscv/Kconfig is out of order (I have a script that's supposed to keep them in order, I'll fix it) and lib/Makefile is out of order (though GENERIC_LIB here doesn't mean quite what it does above). -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl/cHO4THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiTlmD/4uDyNHBM1XH/XD4fSEwTYJvGLqt/Jo vtrGR/fm0SlQFUKCcywSzxcVAeGn56CACbEIDYLuL4xXRJmbwEuaRrHVx2sEhS9p pNhy+wus/SgDz5EUAawMyR2AEWgzl77hY5T/+AAo4yv65SGGBfsIdz5noIVwGNqW r0g5cw2O99z0vwu1aSrK4isWHconG9MfQnnVyepPSh67pyWS4aUCr1K3vLiqD2dE XcgtwdcgzUIY5aEoJNrWo5qTrcaG8m6MRNCDAKJ6MKdDA2wdGIN868G0wQnoURRm Y+yW7w3P20kM0b87zH50jujTWg38NBKOfaXb0mAfawZMapL60veTVmvs2kNtFXCy F6JWRkgTiRnGY72FtRR0igWXT5M7fz0EiLFXLMItGcgj79TUget4l/3sRMN47S/O cA/WiwptJH3mh8IkL6z5ZxWEThdOrbFt8F1T+Gyq/ayblcPnJaLn/wrWoeOwviWR fvEC7smuF5SBTbWZK5tBOP21Nvhb7bfr49Sgr8Tvdjl15tz97qK+2tsLXwkBoQnJ wU45jcXfzr5wgiGBOQANRite5bLsJ0TuOrTgA5gsGpv+JSDGbpcJbm0833x00nX/ 3GsW5xr+vsLCvljgPAtKsyDNRlGQu908Gxrat2+s8u92bLr1bwn30uKL5h6i/n1w QgWATuPPGXZZdw== =GWIH -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "We have a handful of new kernel features for 5.11: - Support for the contiguous memory allocator. - Support for IRQ Time Accounting - Support for stack tracing - Support for strict /dev/mem - Support for kernel section protection I'm being a bit conservative on the cutoff for this round due to the timing, so this is all the new development I'm going to take for this cycle (even if some of it probably normally would have been OK). There are, however, some fixes on the list that I will likely be sending along either later this week or early next week. There is one issue in here: one of my test configurations (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the .text.init alignment patch. With any luck we'll sort out the issue, but given how many bugs get fixed all over the place and how unrelated those features seem my guess is that we're just running into something that's been lurking for a while and has already been fixed in the newer QEMU (though I wouldn't be surprised if it's one of these implicit assumptions we have in the boot flow). If it was hardware I'd be strongly inclined to look more closely, but given that users can upgrade their simulators I'm less worried about it" * tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() riscv: Fixed kernel test robot warning riscv: kernel: Drop unused clean rule riscv: provide memmove implementation RISC-V: Move dynamic relocation section under __init RISC-V: Protect all kernel sections including init early RISC-V: Align the .init.text section RISC-V: Initialize SBI early riscv: Enable ARCH_STACKWALK riscv: Make stack walk callback consistent with generic code riscv: Cleanup stacktrace riscv: Add HAVE_IRQ_TIME_ACCOUNTING riscv: Enable CMA support riscv: Ignore Image.* and loader.bin riscv: Clean up boot dir riscv: Fix compressed Image formats build RISC-V: Add kernel image sections to the resource tree |
||
Linus Torvalds
|
157807123c |
asm-generic: mmu-context cleanup
This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1LsACgkQmmx57+YA GNm6kBAAq4/n6nuNnh6b9LhjXaZRG75gEyW7JvHl8KE5wmZHwDHqbwiQgU1b3lUs JJGbfKqi5ASKxNg6MpfYodmCOqeTUUYG0FUCb6lMhcxxMdfLTLYBvkNd6Y143M+T boi5b/iz+OUQdNPzlVeSsUEVsD59FIXmP/GhscWZN9VAyf/aLV2MDBIOhrDSJlPo ObexnP0Iw1E1NRQYDQ6L2dKTHa6XmHyUtw40ABPmd/6MSd1S+D+j3FGg+CYmvnzG k9g8FbNby8xtUfc0pZV4W/322WN8cDFF9bc04eTDZiAv1bk9lmfvWJ2bWjs3s2qt RO/suiZEOAta/WUX9vVLgYn2td00ef+AyjNUgffiUfvQfl++fiCDFTGl+MoCLjbh xQUPcRuRdED7bMKNrC0CcDOSwWEBWVXvkU/szBLDeE1sPjXzGQ80q1Y72k9y961I mqg7FrHqjZsxT9luXMAzClHNhXAtvehkJZBIdHlFok83EFoTQp48Da4jaDuOOhlq p/lkPJWOHegIQMWtGwRyGmG1qzil7b/QBNAPLgu9pF4TA+ySRBEB2BOr2jRSkj6N mNTHQbSYxBoktdt+VhtrSsxR+i8lwlegx+RNRFmKK3VH5da2nfiBaOY7zBQQHxCK yxQvXvsljSVpfkFKLc/S2nLQL1zTkRfFKV1Xmd3+3owR+EoqM60= =NpMX -----END PGP SIGNATURE----- Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ... |
||
Linus Torvalds
|
e2dc495734 |
asm-generic cleanups for v5.11
These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y10UACgkQmmx57+YA GNmJ8A/6A5iIFTJu48fEb4aVDXkW3WLsgRJ+pPt+sFqNhLJu6yi+HftNPhvfaXuJ 1/S2uqAc2VA8WbHn+KTqPk5SsBh5urI6c4DXxTDHihMT6lIqjRbhKIoIaFx7Vl8d 1CERQTqgJMmGNjrZkOnD3qsud9tbUh/dJZl3UuDYmYmgPw/p+y79mGIwAzvHYsU9 QdazdV6v22ceagp2QSLYTr7LN6pShijyXqcJ4ko9Zhzpj1TNsBF97nKIww/vMm3k XRLBDbPfTcGrUtQmDQ+lVWPNpFbiR2iZuC/CBy4e0MbpQP5l9zoVG7d60Imvi/17 9+vWmvng9ehFiyM5fRYG67L+cKVbPhVMW1TmUpxg88KvznudHKgV0jwXRZV2EO10 /RpVQIJ0rLODx2myEZd8Rqhv2UVmjJmViPq7Hr/D8C+JcwdtfcPnziQteBOB0piz QI1h0me+0Yj90nLpjWBGCwUnFh+8/SAoKkwViCxA+Jmn6/34hh0/5w9ExoI+4Frr 8KlHu5wZ6O0mqWT0INrbeb0nmktFOL9tGwTrHa8Z723osB1nuVtTAvHxWCOSlVDd XkuViDLkcJn4B+7EcUoR1YY9wCwK5eHcvA/h/44Y7xU5k4OEJP5hFhXy4ew2CCbE OpazsuCABkpno/WbLoJSdEA+2Dv/uiN5ChNjACgWBN2M4LlKBGs= =c2xf -----END PGP SIGNATURE----- Merge tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic" * tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Fix file comments for syscalls implemented in kernel/sys.c ctype.h: remove duplicate isdigit() helper qspinlock: use signed temporaries for cmpxchg asm-generic: fix ffs -Wshadow warning asm-generic: percpu: avoid Wshadow warning asm-generic/sembuf: Update architecture related information in comment |
||
Christophe Leroy
|
0a571b085f |
asm-generic: force inlining of get_order() to work around gcc10 poor decision
When building mpc885_ads_defconfig with gcc 10.1,
the function get_order() appears 50 times in vmlinux:
[linux]# ppc-linux-objdump -x vmlinux | grep get_order | wc -l
50
[linux]# size vmlinux
text data bss dec hex filename
3842620 675624 135160 4653404 47015c vmlinux
In the old days, marking a function 'static inline' was forcing GCC to
inline, but since commit
|
||
Linus Torvalds
|
2cffa11e2a |
Generic interrupt and irqchips subsystem:
Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: The rare event of not having completely new chip driver code, just new DT bindings and extensions of existing drivers to accomodate new variants! - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Thanks, tglx -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/YwZgTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoW4CD/90rTi1OQrMe3nb5okVjUZmktz/K3BN Cl5+evFiXiNoH+yJSMIVP+8eMAtBH6RgoaD0EUtSYmgzb9h/JRRQYwtPxobXcMb2 2xcWyLPJkVJL431JKNM8BBRYjLA2VnQ6Ia+Kx3BxqpgKXn5+cEMh1dwIy27Ll2rj +2NHAQe1sHL7o/KcCDhYqbVIDjw5K/d7YPwjEuPeEoNv1DOxrOCdCEfgFN0jBtRE CoaRTBskeAaHIzHNp47Mxyz43g4tA/D8kB68X0OjpEykVkPUbgNK1FHSwaPbIsFT FTSPU3zg8Q6DZ+RGyjNJykIFgUbirlJxARk2c6Ct8Kc3DN6K1jQt4EsU7CXRCc98 BTBjUNeFeNj3irZ4GHhyMKOQJCA1Z5nCRfBUGiW6gK8183us3BLfH5DM1zEsAYUh DCp+UKsLuXhbB80EWq7kl82/2mNGZ8En8EerE6XJA7Z3JN8FplOHEuLezYYzwzbb RIes971Vc50J2u2Wf/M2c3PDz3D/4FzfwUeA4LJfTnmOL09RYZ8CsqSckpx4ku/F XiBnjwtGEpDXWJ8z13DC7yONrxFGByV19+sqHTBlub5DmIs0gXjhC0dKAPAruUIS iCC+Vx6xLgOpTDu8shFsjibbi9Hb6vuZrF2Te+WR5Rf7d80C0J4b5K5PS4daUjr6 IuD2tz+3CtPjHw== =iytv -----END PGP SIGNATURE----- Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ... |
||
Thomas Gleixner
|
3c41e57a1e |
irqchip updates for Linux 5.11
- Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl/Uxq8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDoW0P/0ZMDvFPxrfnJD46exUgUOPuuFF8jZxAlxD8 7UExqar7u6yX7bbq394jPgtOOxldDagfCx/jCXgb9ja7DK5EHKRcrfjaDT8knHi2 Keg5RaRMRi9TVltvWQTxAkXwSv0Atl881qqsndPeZCez0GNZp+HB34s+rNkZwBOu MBrWihMQOSv5QE6milsNc7HXLSHM1eLZ7Y2XgumNtKrIGEX9yZI7qwdMofwP8Za3 ayMOvc1WAWaTJI7Mg5ac1yTCVbqLmRHhCtws6c6DMgaRu6SI0itmbpQzkDuJJIe3 k9h4KQPaKAFcQsoo3GV0MKTMm63eq82XT3CAdv+htYRY1z95D2+nzNK+mJtsGptX gJ2zeJkUb4u+yVtNguL9qjo5ssCXV/6IybJxv6baaEFnSwQMUwqa066NdxmtqfIe 1BOWnc153a7SRbQ34M9/llje+v8YJbueGMS2RFR2LQ6IjjpaHsXh+YCZokfA/kdk zGbOUD5WWFtFD1T3UoaJ4gFt+pzHjNqym4CcEj4S1Vf5y+POUkNmC+GYK+xfm2Fp WJMbdIUxJhHFRD9L1ShtfAVUSbp712VOOdILp9rYAkOdqfb51BVUiMUP++s2dGp1 ZIT78qt7kTKT1CxbDdFAjzsi7RoMqdSGYgKmG4sVprELeZnFwq47nBkBr8XEQ1TT 0ccEUOY8 =7Z24 -----END PGP SIGNATURE----- Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 5.11 from Marc Zyngier: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org |
||
Linus Torvalds
|
148842c98a |
Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality - Let IO/APIC construct the RTE entries from an MSI message instead of having IO/APIC specific code in the interrupt remapping drivers - Make the retrieval of the parent interrupt domain (vector or remap unit) less hardcoded and use the relevant irqdomain callbacks for selection. - Allow the handling of more than 255 CPUs without a virtualized IOMMU when the hypervisor supports it. This has made been possible by the above modifications and also simplifies the existing workaround in the HyperV specific virtual IOMMU. - Cleanup of the historical timer_works() irq flags related inconsistencies. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/Xxd8THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoYpOD/9C5TppNlPMUyx2SflH6bxt37pJEpln +hYTKsk+jSThntr5mfj+GifGvgmHOVBTGnlDUnUnrpN7TQmLFBzwTOtnBLW53AO2 16/u0+Xci4LNCtEkaymf0Rq4MfsfriXHPJr0A/CnZ0tpHSf5QKHAiitSiGujdMlb gbq43+zXd+jNkH7vkOLPX/7dZVI1hNASQEevJu2tRR4xYTuXFdBxvLgYkHtYKKrK R1sbs6nI6yIzye2u4m4xGu29SxgUft+zdUf+UehJKM3yFmf51d9qpkX+kLaTWuaL VPsMItbn0kdvxwXQWO6DYnIAAnVKCklyHQJTZCoNq9Fe91OoByak1CEVspSOa1av JmycNSch4IYWasR4vVCB1gbb+V9SejcKu5SV3CDrEDqwkOIpfiqpriUXSCJTLlFd QOEDOLuuk/79Qs//J/tb/nJ4IuKv8WPudDfIlMro8wUsAr67DjD4mnXprZ+svwWx Ct/0/Memk+BSa0cw6pvg24BUZGN6zrufkBu2HKT9GOXRUdNkdLkiPhT8mK4T/O0l f90QCLjPSOJ/K/pLEWdUHEPmgC5Q9RsXOmwVGqX+RbjfP7mYTJXlmWnBb+cFNch0 xFIH3SxVGylxxT06NX3SkvinrHj10CoAlmneefBlLtx6dF+2P84DAMZSF0OFToVI c2KMg5zoesI4bg== =8Gfs -----END PGP SIGNATURE----- Merge tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "Yet another large set of x86 interrupt management updates: - Simplification and distangling of the MSI related functionality - Let IO/APIC construct the RTE entries from an MSI message instead of having IO/APIC specific code in the interrupt remapping drivers - Make the retrieval of the parent interrupt domain (vector or remap unit) less hardcoded and use the relevant irqdomain callbacks for selection. - Allow the handling of more than 255 CPUs without a virtualized IOMMU when the hypervisor supports it. This has made been possible by the above modifications and also simplifies the existing workaround in the HyperV specific virtual IOMMU. - Cleanup of the historical timer_works() irq flags related inconsistencies" * tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/ioapic: Cleanup the timer_works() irqflags mess iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select() iommu/amd: Fix IOMMU interrupt generation in X2APIC mode iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled iommu/amd: Fix union of bitfields in intcapxt support x86/ioapic: Correct the PCI/ISA trigger type selection x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available x86/apic: Support 15 bits of APIC ID in MSI where available x86/ioapic: Handle Extended Destination ID field in RTE iommu/vt-d: Simplify intel_irq_remapping_select() x86: Kill all traces of irq_remapping_get_irq_domain() x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain iommu/hyper-v: Implement select() method on remapping irqdomain iommu/vt-d: Implement select() method on remapping irqdomain iommu/amd: Implement select() method on remapping irqdomain x86/apic: Add select() method on vector irqdomain ... |
||
Linus Torvalds
|
edd7ab7684 |
The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic implementation which builds the base for the kmap_local() API and make the kmap_atomic() interface wrappers which handle the disabling/enabling of preemption and pagefaults. - Switch the storage from per-CPU to per task and provide scheduler support for clearing mapping when scheduling out and restoring them when scheduling back in. - Merge the migrate_disable/enable() code, which is also part of the scheduler pull request. This was required to make the kmap_local() interface available which does not disable preemption when a mapping is established. It has to disable migration instead to guarantee that the virtual address of the mapped slot is the same accross preemption. - Provide better debug facilities: guard pages and enforced utilization of the mapping mechanics on 64bit systems when the architecture allows it. - Provide the new kmap_local() API which can now be used to cleanup the kmap_atomic() usage sites all over the place. Most of the usage sites do not require the implicit disabling of preemption and pagefaults so the penalty on 64bit and 32bit non-highmem systems is removed and quite some of the code can be simplified. A wholesale conversion is not possible because some usage depends on the implicit side effects and some need to be cleaned up because they work around these side effects. The migrate disable side effect is only effective on highmem systems and when enforced debugging is enabled. On 64bit and 32bit non-highmem systems the overhead is completely avoided. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XyQwTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoUolD/9+R+BX96fGir+I8rG9dc3cbLw5meSi 0I/Nq3PToZMs2Iqv50DsoaPYHHz/M6fcAO9LRIgsE9jRbnY93GnsBM0wU9Y8yQaT 4wUzOG5WHaLDfqIkx/CN9coUl458oEiwOEbn79A2FmPXFzr7IpkufnV3ybGDwzwP p73bjMJMPPFrsa9ig87YiYfV/5IAZHi82PN8Cq1v4yNzgXRP3Tg6QoAuCO84ZnWF RYlrfKjcJ2xPdn+RuYyXolPtxr1hJQ0bOUpe4xu/UfeZjxZ7i1wtwLN9kWZe8CKH +x4Lz8HZZ5QMTQ9sCHOLtKzu2MceMcpISzoQH4/aFQCNMgLn1zLbS790XkYiQCuR ne9Cua+IqgYfGMG8cq8+bkU9HCNKaXqIBgPEKE/iHYVmqzCOqhW5Cogu4KFekf6V Wi7pyyUdX2en8BAWpk5NHc8de9cGcc+HXMq2NIcgXjVWvPaqRP6DeITERTZLJOmz XPxq5oPLGl7wdm7z+ICIaNApy8zuxpzb6sPLNcn7l5OeorViORlUu08AN8587wAj FiVjp6ZYomg+gyMkiNkDqFOGDH5TMENpOFoB0hNNEyJwwS0xh6CgWuwZcv+N8aPO HuS/P+tNANbD8ggT4UparXYce7YCtgOf3IG4GA3JJYvYmJ6pU+AZOWRoDScWq4o+ +jlfoJhMbtx5Gg== =n71I -----END PGP SIGNATURE----- Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kmap updates from Thomas Gleixner: "The new preemtible kmap_local() implementation: - Consolidate all kmap_atomic() internals into a generic implementation which builds the base for the kmap_local() API and make the kmap_atomic() interface wrappers which handle the disabling/enabling of preemption and pagefaults. - Switch the storage from per-CPU to per task and provide scheduler support for clearing mapping when scheduling out and restoring them when scheduling back in. - Merge the migrate_disable/enable() code, which is also part of the scheduler pull request. This was required to make the kmap_local() interface available which does not disable preemption when a mapping is established. It has to disable migration instead to guarantee that the virtual address of the mapped slot is the same across preemption. - Provide better debug facilities: guard pages and enforced utilization of the mapping mechanics on 64bit systems when the architecture allows it. - Provide the new kmap_local() API which can now be used to cleanup the kmap_atomic() usage sites all over the place. Most of the usage sites do not require the implicit disabling of preemption and pagefaults so the penalty on 64bit and 32bit non-highmem systems is removed and quite some of the code can be simplified. A wholesale conversion is not possible because some usage depends on the implicit side effects and some need to be cleaned up because they work around these side effects. The migrate disable side effect is only effective on highmem systems and when enforced debugging is enabled. On 64bit and 32bit non-highmem systems the overhead is completely avoided" * tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) ARM: highmem: Fix cache_is_vivt() reference x86/crashdump/32: Simplify copy_oldmem_page() io-mapping: Provide iomap_local variant mm/highmem: Provide kmap_local* sched: highmem: Store local kmaps in task struct x86: Support kmap_local() forced debugging mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL microblaze/mm/highmem: Add dropped #ifdef back xtensa/mm/highmem: Make generic kmap_atomic() work correctly mm/highmem: Take kmap_high_get() properly into account highmem: High implementation details and document API Documentation/io-mapping: Remove outdated blurb io-mapping: Cleanup atomic iomap mm/highmem: Remove the old kmap_atomic cruft highmem: Get rid of kmap_types.h xtensa/mm/highmem: Switch to generic kmap atomic sparc/mm/highmem: Switch to generic kmap atomic powerpc/mm/highmem: Switch to generic kmap atomic nds32/mm/highmem: Switch to generic kmap atomic ... |
||
Linus Torvalds
|
76d4acf22b |
perf/kprobes updates:
- Make kretprobes lockless to avoid the rp->lock performance and potential lock ordering issues. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XvuYTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoV3XEADA3yp4ApabrdSMK+JpTM053mM3NCCk VLZEdh5+ydvPfgTWZcgLDfL4P4MVySDKf40pSVgZOA73uDWhdO4jcMoJgl9Du4Nq qfvz6Atj0a8XEgAFNh1IWGGAHydIwKOQZJyjFT5Kh94QNOErF2PJGAMnoMYpdJsj E7kgDM+vmWJk0GE+OYTzsAYQ99XhLfUAO9f8WoRirxyNgga6bu0arRYWZSX3Sg/h oDUHeizyrrURUBgxJBewCxvCsy4TTfefwZFUBLK5gm3zRJLKDT2O8wiy+KzlRQqA kYV3fSx8fYETlSOJWJC8S01MLpxslGdenIdRgNc63C021DtwMGM83FCl0DLnPMeg iX5u+0Qg77rnJ8zh0cgSxyP6EgZzrUW8+DjZagge3PAnTXwYRv95pOJahJifDVmF mo2RJ2Me+XbqeB4BYoLivvWpXdsWOvtXl3BTA6ZLV+K823lMPYcZO/cXHIUYHhtu ExrZ+aw3opt43KT5sNQmPll7d1UsMD4/761L7gysIYK0RthunmlWpAnnfLTbRdPe ELKIHcuSCGkGfRs07/oPbbOpMorhel+3alW0B6Vzar0/0nw3fPX/yPIkCh7s941o G0UIPquvBGk3u0bZKZZ7QJPjT0ktdQpQs69+J2ARXWvApAGKnkOlPsNSI9TbPE3D ZIguKqSyzqJwuA== =PDBa -----END PGP SIGNATURE----- Merge tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf/kprobes updates from Thomas Gleixner: "Make kretprobes lockless to avoid the rp->lock performance and potential lock ordering issues" * tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Regenerate the atomics-check SHA1's kprobes: Replace rp->free_instance with freelist freelist: Implement lockless freelist asm-generic/atomic: Add try_cmpxchg() fallbacks kprobes: Remove kretprobe hash llist: Add nonatomic __llist_add() and __llist_dell_all() |
||
Linus Torvalds
|
1ac0884d54 |
A set of updates for entry/exit handling:
- More generalization of entry/exit functionality - The consolidation work to reclaim TIF flags on x86 and also for non-x86 specific TIF flags which are solely relevant for syscall related work and have been moved into their own storage space. The x86 specific part had to be merged in to avoid a major conflict. - The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal delivery mode of task work and results in an impressive performance improvement for io_uring. The non-x86 consolidation of this is going to come seperate via Jens. - The selective syscall redirection facility which provides a clean and efficient way to support the non-Linux syscalls of WINE by catching them at syscall entry and redirecting them to the user space emulation. This can be utilized for other purposes as well and has been designed carefully to avoid overhead for the regular fastpath. This includes the core changes and the x86 support code. - Simplification of the context tracking entry/exit handling for the users of the generic entry code which guarantee the proper ordering and protection. - Preparatory changes to make the generic entry code accomodate S390 specific requirements which are mostly related to their syscall restart mechanism. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl/XoPoTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoe0tD/4jSKHIogVM9kVpiYfwjDGS1NluaBXn 71ZoASbX9GZebyGandMyF2QP1iJ24ZO0RztBwHEVH6fyomKB2iFNedssCpO9yfWV 3eFRpOvMpbszY2W2bd0QG3GrqaTttjVfB4ahkGLzqeSbchdob6hZpNDYtBZnujA6 GSnrrurfJkCGoQny+yJQYdQJXQU+BIX90B2a2Q+jW123Luy/iHXC1f/krZSA1m14 fC9xYLSUjPphTzh2ZOW+C3DgdjOL5PfAm/6F+DArt4GtLgrEGD7R74aLSFhvetky dn5QtG+yAsz1i0cc5Wu/JBcT9tOkY92rPYSyLI9bYQUSQ/bMyuprz6oYKj3dubsu ZSsKPdkNFPIniL4fLdCMWZcIXX5xgnrxKjdgXZXW3gtrcxSns8w8uED3Sh7dgE08 pgIeq67E5g/OB8kJXH1VxdewmeQb9cOmnzzHwNO7TrrGbBKjDTYHNdYOKf1dUTTK ZX1UjLfGwxTkMYAbQD1k0JGZ2OLRshzSaH5BW/ZKa3bvJW6yYOq+/YT8B8hbJ8U3 vThlO75/55IJxS5r5Y3vZd/IHdsYbPuETD+TA8tNYtPqNZasW8nnk4TYctWqzDuO /Ka1wvWYid3c6ySznQn4zSyRjr968AfHeZ9YTUMhWufy5waXVmdBMG41u3IKfsVt osyzNc4EK19/Mg== =hsjV -----END PGP SIGNATURE----- Merge tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core entry/exit updates from Thomas Gleixner: "A set of updates for entry/exit handling: - More generalization of entry/exit functionality - The consolidation work to reclaim TIF flags on x86 and also for non-x86 specific TIF flags which are solely relevant for syscall related work and have been moved into their own storage space. The x86 specific part had to be merged in to avoid a major conflict. - The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal delivery mode of task work and results in an impressive performance improvement for io_uring. The non-x86 consolidation of this is going to come seperate via Jens. - The selective syscall redirection facility which provides a clean and efficient way to support the non-Linux syscalls of WINE by catching them at syscall entry and redirecting them to the user space emulation. This can be utilized for other purposes as well and has been designed carefully to avoid overhead for the regular fastpath. This includes the core changes and the x86 support code. - Simplification of the context tracking entry/exit handling for the users of the generic entry code which guarantee the proper ordering and protection. - Preparatory changes to make the generic entry code accomodate S390 specific requirements which are mostly related to their syscall restart mechanism" * tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) entry: Add syscall_exit_to_user_mode_work() entry: Add exit_to_user_mode() wrapper entry_Add_enter_from_user_mode_wrapper entry: Rename exit_to_user_mode() entry: Rename enter_from_user_mode() docs: Document Syscall User Dispatch selftests: Add benchmark for syscall user dispatch selftests: Add kselftest for syscall user dispatch entry: Support Syscall User Dispatch on common syscall entry kernel: Implement selective syscall userspace redirection signal: Expose SYS_USER_DISPATCH si_code type x86: vdso: Expose sigreturn address on vdso to the kernel MAINTAINERS: Add entry for common entry code entry: Fix boot for !CONFIG_GENERIC_ENTRY x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs sched: Detect call to schedule from critical entry code context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK x86: Reclaim unused x86 TI flags ... |
||
Palmer Dabbelt
|
7d95a88f92
|
Add and use a generic version of devmem_is_allowed()
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() |
||
Palmer Dabbelt
|
527701eda5
|
lib: Add a generic version of devmem_is_allowed()
As part of adding support for STRICT_DEVMEM to the RISC-V port, Zong provided a devmem_is_allowed() implementation that's exactly the same as all the others I checked. Instead I'm adding a generic version, which will soon be used. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> |
||
Marc Zyngier
|
91f90daa4f |
platform-msi: Track shared domain allocation
We have two flavours of platform-MSI: - MSIs generated by devices for themselves (the usual case) - MSIs generated on behalf of other devices, as the generating device is some form of bridge (either a wire-to-MSI bridge, or even a non-transparent PCI bridge that repaints the PCI requester ID). In the latter case, the underlying interrupt architecture may need to track this in order to keep the mapping alive even when no MSI are currently being generated. Add a set of flags to the generic msi_alloc_info_t structure, as well as the MSI_ALLOC_FLAGS_PROXY_DEVICE flag that will get advertized by the platform-MSI code when allocating an irqdomain for a device. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20201129135208.680293-2-maz@kernel.org |
||
Thomas Gleixner
|
6e799cb69a |
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
CONFIG_KMAP_LOCAL can be enabled by x86/32bit even if CONFIG_HIGHMEM is not enabled for temporary MMIO space mappings. Provide it as a seperate config option which depends on CONFIG_KMAP_LOCAL and let CONFIG_DEBUG_HIGHMEM select it. This won't increase the debug coverage of this significantly but it paves the way to do so. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20201118204006.869487226@linutronix.de |
||
Thomas Gleixner
|
e091bc90cd |
irqstat: Move declaration into asm-generic/hardirq.h
Move the declaration of the irq_cpustat per cpu variable to asm-generic/hardirq.h and remove the now empty linux/irq_cpustat.h header. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141733.737377332@linutronix.de |
||
Thomas Gleixner
|
1adb99eabc |
asm-generic/irqstat: Add optional __nmi_count member
Add an optional __nmi_count member to irq_cpustat_t so more architectures can use the generic version. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141733.501611990@linutronix.de |
||
Gabriel Krisman Bertazi
|
785dc4eb7f |
audit: Migrate to use SYSCALL_WORK flag
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_AUDIT, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-9-krisman@collabora.com |
||
Gabriel Krisman Bertazi
|
64c19ba29b |
ptrace: Migrate to use SYSCALL_TRACE flag
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_TRACE, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-7-krisman@collabora.com |
||
Gabriel Krisman Bertazi
|
23d67a5485 |
seccomp: Migrate to use SYSCALL_WORK flag
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com |
||
Linus Torvalds
|
a50cf15906 |
Merge branch 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix and cleanup from Dennis Zhou: "A fix for a Wshadow warning in the asm-generic percpu macros came in and then I tacked on the removal of flexible array initializers in the percpu allocator" * 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: convert flexible array initializers to use struct_size() asm-generic: percpu: avoid Wshadow warning |
||
Arvind Sankar
|
3347acc6fc |
compiler.h: fix barrier_data() on clang
Commit |
||
Ingo Molnar
|
a70a04b384 |
locking/atomics: Regenerate the atomics-check SHA1's
The include/asm-generic/atomic-instrumented.h checksum got out of sync, so regenerate it. (No change to actual code.) Also make scripts/atomic/gen-atomics.sh executable, to make it easier to use. The auto-generated atomic header signatures are now fine: thule:~/tip> scripts/atomic/check-atomics.sh thule:~/tip> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Ingo Molnar
|
666fab4a3e |
Merge branch 'linus' into perf/kprobes
Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:
|
||
Thomas Gleixner
|
d7029e4549 |
highmem: Get rid of kmap_types.h
The header is not longer used and on alpha, ia64, openrisc, parisc and um it was completely unused anyway as these architectures have no highmem support. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095858.422094352@linutronix.de |
||
Thomas Gleixner
|
4f8b96cd47 |
asm-generic: Provide kmap_size.h
kmap_types.h is a misnomer because the old atomic MAP based array does not exist anymore and the whole indirection of architectures including kmap_types.h is inconinstent and does not allow to provide guard page debugging for this misfeature. Add a common header file which defines the mapping stack size for all architectures. Will be used when converting architectures over to a generic kmap_local/atomic implementation. The array size is chosen with the following constraints in mind: - The deepest nest level in one context is 3 according to code inspection. - The worst case nesting for the upcoming reemptible version would be: 2 maps in task context and a fault inside 2 maps in the fault handler 3 maps in softirq 2 maps in interrupt So a total of 16 is sufficient and probably overestimated. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20201103095857.078043987@linutronix.de |
||
Linus Torvalds
|
11ad2a73de |
asm-generic: fixes for v5.10
There is one small bugfix, fixing a build regression for RISC-V Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl+cNsoACgkQmmx57+YA GNnVXQ//WuMPr7/bUDtSKzDNZKqV7dig7Cjv0bIr3A+LA3ximoJRvMNAe3XJDj0Y /OmIOf3I0fGwWhm2omujC4DfYzzimGq/aOq2RlOrqvnr06y4HtWiblnFZQjf0i9T v0j1jQLR4gZFazbr7p9n0Ib2sLK96d+2Yhb8m1pxrN1vG26D3Yrd4hHZCUi8CT+H b++i1X+FkXLdtjiR5yvIXCFbAU5ykvKBf/Hw4qr+5IZuxl2L1Lv3tXaTI77MiA1Y jJSc/l+kFc8RMYaOoK2GRuuIxiAwJwxLyPOeS6yBcHxlJ0bqQjbcpNTRok073fFf Ilnb4mL4qlWlf+w3EGd8cZ+kL/pY+48B8c0EyZ3h/P0FyDEMstWlxDZ4H/yfNtxC d/uCHh8wNAHPwAtLgeC26jE9XY6YYxYIQ96tcxaM6Okdwpp0O/7j9jH6u1Ph/bTJ Xio0olowJWmeC8LihJJ9tzAv8E/Yp3GdufWjm4Ruvcdg0pGnP0Wx+u1sJUWmb0Kh ho2M1pI/jx/Gmn2BZ02d9timAj4Z/zM84JcFbsucvkzlqic8eMi44a/LH4MlK7H4 yofX1MRTlxJTaXCwoTkFiO08iJlOa4SwHdkByfxdyEX66SJELhVz04tR5Jz19V5u ++ATlVq89jVxpLdHCUAjf7LOHwfXzFyiLyCN3no+/SEUJoz1pTA= =vygx -----END PGP SIGNATURE----- Merge tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "One small bugfix, fixing a build regression for RISC-V" * tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: mark __{get,put}_user_fn as __always_inline |
||
Thomas Gleixner
|
8073c1ac82 |
genirq/msi: Allow shadow declarations of msi_msg:: $member
Architectures like x86 have their MSI messages in various bits of the data, address_lo and address_hi field. Composing or decomposing these messages with bitmasks and shifts is possible, but unreadable gunk. Allow architectures to provide an architecture specific representation for each member of msi_msg. Provide empty defaults for each and stick them into an union. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-12-dwmw2@infradead.org |
||
Kees Cook
|
3e6631485f |
vmlinux.lds.h: Keep .ctors.* with .ctors
Under some circumstances, the compiler generates .ctors.* sections. This
is seen doing a cross compile of x86_64 from a powerpc64el host:
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being
placed in section `.ctors.65435'
Include these orphans along with the regular .ctors section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
||
Christoph Hellwig
|
0bcd0a2be8 |
asm-generic: mark __{get,put}_user_fn as __always_inline
Without the explicit __always_inline, some RISC-V configs place the
functions out of line, triggering the BUILD_BUG_ON checks in the
function.
Fixes:
|
||
Arnd Bergmann
|
29813a2297 |
asm-generic: percpu: avoid Wshadow warning
Nesting macros that use the same local variable names causes warnings when building with "make W=2": include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] These are fairly harmless, but since the warning comes from a global header, the warning happens every time the headers are included, which is fairly annoying. Rename the variables to avoid shadowing and shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> |
||
Arnd Bergmann
|
f44ca0871b |
qspinlock: use signed temporaries for cmpxchg
When building with W=2, the build log is flooded with
include/asm-generic/qrwlock.h:65:56: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
include/asm-generic/qrwlock.h:92:53: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
include/asm-generic/qspinlock.h:68:55: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
include/asm-generic/qspinlock.h:82:52: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
The atomics are built on top of signed integers, but the caller
doesn't actually care. Just use signed types as well.
Fixes:
|
||
Arnd Bergmann
|
6f6573a404 |
asm-generic: fix ffs -Wshadow warning
gcc -Wshadow warns about the ffs() definition that has the same name as the global ffs() built-in: include/asm-generic/bitops/builtin-ffs.h:13:28: warning: declaration of 'ffs' shadows a built-in function [-Wshadow] This is annoying because 'make W=2' warns every time this header gets included. Change it to use a #define instead, making callers directly reference the builtin. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
80b4707a2f |
asm-generic: percpu: avoid Wshadow warning
Nesting macros that use the same local variable names causes warnings when building with "make W=2": include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] These are fairly harmless, but since the warning comes from a global header, the warning happens every time the headers are included, which is fairly annoying. Rename the variables to avoid shadowing and shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Nicholas Piggin
|
94f89922e1 |
asm-generic: add generic MMU versions of mmu context functions
Many of these are no-ops on many architectures, so extend mmu_context.h to cover MMU and NOMMU, and split the NOMMU bits out to nommu_context.h Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
0593c1b459 |
RISC-V Patches for the 5.10 Merge Window, Part 2
This actually just contains a single patch set: * The remainder of Christoph's work to remove set_fs, including the RISC-V portion. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl+TtGcTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiS1rD/97L4HvdLpNOOcbk3ecGEe0l1VMx9JE twhJyifurCf7w70WwgOjNL5sl1OnoDjUjFni0GyrN5+FycocAHd9o1+fqvaEwRaZ BFusgHkzuRhf+hSCwYov1spPuJbp4bKH6yat169uLrskjEZkhk0Dc2lVMHXb3Sn4 4AzmSz6i58KkX1BLnSAlo6JPbFm2NaEswxWrcifcbjJ1lsvPYOgjR3SH5StXxO2a sggsOtUeKsHkHwTsxeSGzcqxwEuxsjNN75BPT11E1Ip9XS2qv6XzalVVWiXIdcff beJ8y5RuBb7OkbgFcmTXyr/RNoOIPq1xiIGzWu5ITi9PX7TTIdUFHGFaGE8LIRSY PuNOnP3pz+0r/bBscXFSba6zPLeACNYraJxtcc6sfLlkUmHDwQDTu1ChHYNW6H7N JHPcMy8wdootYO2nwdNDCCOE0Tes5OkeW+5pw7qhSv+6ZkY+9i2jKVkhx19oq81X Be9rrADNt3y9jGlu3xjvL5naN6OlTWWFh9r6M9LSDpvqIHrraaabJqkzM1LPLzu+ +NJ8lKBbbyzIwXyg/+yVecO58UWqMzbOdvdnZHrd2wUTEHotKuF8L8RV/QKrAtK1 5K9s00eKnTge1Lhm1NcaseI8yZrgpcOr9zFJW1IEoxPzpy+leM1VuMKG43MxMKR2 Ed0ldco9ht64Jg== =EaJX -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "Just a single patch set: the remainder of Christoph's work to remove set_fs, including the RISC-V portion" * tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove address space overrides using set_fs() riscv: implement __get_kernel_nofault and __put_user_nofault riscv: refactor __get_user and __put_user riscv: use memcpy based uaccess for nommu again asm-generic: make the set_fs implementation optional asm-generic: add nommu implementations of __{get,put}_kernel_nofault asm-generic: improve the nommu {get,put}_user handling uaccess: provide a generic TASK_SIZE_MAX definition |
||
Linus Torvalds
|
746b25b1aa |
Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl+RfS0VHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGG1QP/2hzoMzK1YXErPUhGrhYU1rxz7Nu HkLTIkyKF1HPwSJf5XyNW/FTBI4SDlkNoVg/weEDCS1yFxxpvQLIck8ChzA1kIIM P+1IfBWOTzqn91XsapU2zwSno3gylphVchVIvYAB3oLUotGeMSluy1cQtBRzyA5D rj2Q7H8fzkzk3YoBcBC/BOKDlfo/usqQ1X/gsfRFwN/BJxeZSYoujNBE7KtHaDsd 8K/ggBIqmST4NBn+M8c11d8CxzvWbtG1gq3EkUL5nG8T13DsGn1EFC0SPt85bkvv f9YywfJi37HixhZzK6tXYjN/PWoiEY6z90mhd0NtZghQT7kQMiTQ3sWrM8dX3ssf phBzO94uFQDjhyxOaSSsCoI/TIciAPo4+G8PNjcaEtj63IEfhEz/dnlstYwY5Y9P Pp3aZtVjSGJwGW2u2EUYj6paFVqjf6DXQjQKPNHnsYCEidIvFTjjguRGvx9gl6mx yd8oseOsAtOEf0alRe9MMdvN17O3UrRAxgBdap7fktg02TLVRGxZIbuwKmBf29ho ORl9zeFkYBn6XQFyuItJoXy/kYFyHDaBEPYCRQcY4dwqcjZIiAc/FhYbqYthJ59L 5vLN2etmDIVSuUv1J5nBqHHGCqJChykbqg7riQ651dCNKw4gZB8ctCay2lXhBXMg 1mqOcoG5WWL7//F+ =tZRN -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ... |
||
Linus Torvalds
|
00937f36b0 |
pci-v5.10-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl+QUFkUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vw6SQ/9FHiAlHIa48/l5ZweqAuN3XnU8hoO sqMoJE8eqTkIYIT0aQdW6b1sDB0YE6b4UVxzg+UL/E0qYeJqgIUakig7QkyyF1qU aT5hq2ic+lk88G7AAxK3kgQGPk+JvP1EFIyOu6HBWzzDDzgLme1Iuh/5ulc2/lo+ E4biy0WOnI8vMfCieXGK4bSpc17Rn0+3N4cuVwZXBlntsvicE90VqeWBzqti1sk5 R6gkZuW+EIUNHHL7TLlkCeYZq6QNbXWzhfKCiaGW2wW4eJ4Ek1/ncQjyTbCFytKU 7OIYvrH20XO3L5GEfJ5fdbWErI1dRpoHO4NmhWljyBcVh44VYnM2ixhA7TuJ+TOk OtMbtoJAlP+QDlVdAW6rmRYmMPLFK/AQl5Aq7ftY22b2rYXqP20BobPy2MpDT71T sGC8z0ABl/ijo23g3I+3/2VzP/RzGhZJ0ZqagrXj8jHtg8SVy2fLcR5nr/dlrgFk TG83zML6ui1KViyx5nzElaEtw18aTqP61CNQxijQtNoYwKBTtRKNTrdRr4Qo7Hi6 6S+No3+4z8Kf8d90y0LkJQqr7JRkG6nI3AhXHO3rxXpXJOD2+QzlpwBZTQnASqq7 3kC1doUPmN97rFUYPQWWyOs6xSMcGbGIz8Uus3shH6yDtNxgpnIVoctH55hTEh6w nSY/4ssIfzJxZCE= =RCFo -----END PGP SIGNATURE----- Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ... |
||
Linus Torvalds
|
7cf726a594 |
linux-kselftest-kunit-5.10-rc1
This Kunit update for Linux 5.10-rc1 consists of: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl+Mr68ACgkQCwJExA0N Qxy7HxAAuToPP6uUHwTC3KzVVE4hjP9a3t4hiD7kP/gI0umN+2nrccm6Vx6E+r9t Jkjiv9Yxj3riOkE5jJ8KriAx228mwz3N1yBEDfpp+8iCWOK3iOuFKKTTWOoZY4hf Enlf7n4Yp2TOEmIH0xwh/H67zl0+3FwT3fGWC6DDPXHuw+X+mGphCl9XPB70rZcT q/s0dwx1CmWBm30MgFXN+SZ7CgLP13lRAvkVO4t56/O1SkTbpCe7U1zqT2p5UoOY x7qvzs3pdCaWbpCsAqFWr46iECDHuVQjIgLuddOF/OgWVcCZlv7T7ESd7IDPHUPx DD3zYG0ODV0jKZHmpwkSojSbu3z6v5FnfhLpAcaHoEMBeRu5UIar7EjPHwqrqiU7 JqE7dBECmcD308sr9u0w44DK15nmsD3+njrBQ/AJmsWdg0wtnMvA01nAHKObbk0n 33aIu4Iny1dH35/rt9dV2DKT09f5r0ANCjoJMX8gu/li66FHGfULOaqr6KLLqi5X VPgHCKzyT9nD+Bc2LYzRWmhhAj+5Iwyglgpe9ZiOlPQ5i+hLvfPPAZxVYSbVA1Sk aVZi+ibKUqHSBfXcaLf/OKX7Csf4zni3F+WfFT5ZIC4Y6iEF+0tvS2HW2/pcUAN/ OSPYYmyqhwYIl8tvbQENgBsyU/K1rECxJpqWAznJLRCebkY5a/s= =0Sco -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines |
||
Linus Torvalds
|
2d0f6b0aab |
hyperv-next for 5.10, part 2
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+IfF4THHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXgdnCACUnI5sKbEN/uEvWz4JGJzTSwr20VHt FkzpbeS4A9vHgl4hXVvGc4eMrwF/RtWY6RrLlJauZSQA1mjU0paAjf2noBFYX41m zHX6f8awJrPd0cFChrOKcAlPnQy5OHYTJb7id2EakGGIrd0rmR/TkVAdEku23SDD N7wheh5dVLnkSPwfiERz8Iq0CswMrSjgTljKnwU7XqUqwcNt+7rLRDFAH/M3NG/x omBrWO8k6t2r0h4otqCQZIyCSLwPO+Wdb9BSaA147eOFHHbhqZlHNJYjIkMROZau CJn7S0nZorsAUvka3l7W8nyMQmK4PXOh36bwkXzpkV4b+lgit0euXIzA =H2vc -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull another Hyper-V update from Wei Liu: "One patch from Michael to get VMbus interrupt from ACPI DSDT" * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT |
||
Linus Torvalds
|
5a32c3413d |
dma-mapping updates for 5.10
- rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw 286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD 8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76 mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI 6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg 7fM= =Bkf/ -----END PGP SIGNATURE----- Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ... |
||
Michael Kelley
|
626b901f60 |
Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT
On ARM64, Hyper-V now specifies the interrupt to be used by VMbus in the ACPI DSDT. This information is not used on x86 because the interrupt vector must be hardcoded. But update the generic VMbus driver to do the parsing and pass the information to the architecture specific code that sets up the Linux IRQ. Update consumers of the interrupt to get it from an architecture specific function. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1597434304-40631-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
Linus Torvalds
|
e18afa5bfa |
Merge branch 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat quotactl cleanups from Al Viro: "More Christoph's compat cleanups: quotactl(2)" * 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: quota: simplify the quotactl compat handling compat: add a compat_need_64bit_alignment_fixup() helper compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h> |
||
Linus Torvalds
|
c90578360c |
Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull copy_and_csum cleanups from Al Viro: "Saner calling conventions for csum_and_copy_..._user() and friends" [ Removing 800+ lines of code and cleaning stuff up is good - Linus ] * 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ppc: propagate the calling conventions change down to csum_partial_copy_generic() amd64: switch csum_partial_copy_generic() to new calling conventions sparc64: propagate the calling convention changes down to __csum_partial_copy_...() xtensa: propagate the calling conventions change down into csum_partial_copy_generic() mips: propagate the calling convention change down into __csum_partial_copy_..._user() mips: __csum_partial_copy_kernel() has no users left mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic() i386: propagate the calling conventions change down to csum_partial_copy_generic() sh: propage the calling conventions change down to csum_partial_copy_generic() m68k: get rid of zeroing destination on error in csum_and_copy_from_user() arm: propagate the calling convention changes down to csum_partial_copy_from_user() alpha: propagate the calling convention changes down to csum_partial_copy.c helpers saner calling conventions for csum_and_copy_..._user() csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum csum_partial_copy_nocheck(): drop the last argument unify generic instances of csum_partial_copy_nocheck() icmp_push_reply(): reorder adding the checksum up skb_copy_and_csum_bits(): don't bother with the last argument |
||
Linus Torvalds
|
dd502a8107 |
This tree introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection) by modifying the text. They give the flexibility of function pointers, but with better performance. (This is especially important for cases where retpolines would otherwise be used, as retpolines can be pretty slow.) API overview: DECLARE_STATIC_CALL(name, func); DEFINE_STATIC_CALL(name, func); DEFINE_STATIC_CALL_NULL(name, typename); static_call(name)(args...); static_call_cond(name)(args...); static_call_update(name, func); x86 is supported via text patching, otherwise basic indirect calls are used, with function pointers. There's a second variant using inline code patching, inspired by jump-labels, implemented on x86 as well. The new APIs are utilized in the x86 perf code, a heavy user of function pointers, where static calls speed up the PMU handler by 4.2% (!). The generic implementation is not really excercised on other architectures, outside of the trivial test_static_call_init() self-test. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+EfAQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1iEAw//divHeVCJnHhV+YBbuI9ROUsERkzu8VhK O1DEmW68Fvj7pszT8NZsMjtkt97ZtxDRK7aCJiiup0eItG9qCJ8lpCLb84ZbizHV HhCbhBLrpxSvTrWlQnkgP1OkPAbtoryIjVlZzWhjye2MY8UEbVnZWyviBolbAAxH Fk1Yi56fIMu19GO+9Ohzy9E2VDnVEH1iMx5YWoLD2H88Qbq/yEMP+U2tIj8hIVKT Y/jdogihNXRIau6QB+YPfDPisdty+RHxfU7zct4Rv8cFF5ylglZB5fD34C3sUQF2 WqsaYz7zjUj9f02F8pw8hIaAT7InzArPhlNVITxf2oMfmdrNqBptnSCddZqCJLvv oDGew21k50Zcbqkv9amclpxXH5tTpRvJeqit2pz/85GMeqBRuhzHUAkCpht5YA73 qJsHWS3z+qIxKi0tDbhDJswuwa51q5sgdUUwo1uCr3wT3DGDlqNhCAZBzX14dcty 0shDSbv13TCwqAcb7asPzEoPwE15cwa+x+viGEIL901pyZKyQYjs/abDU26It3BW roWRkuVJZ9/QMdZJs1v7kaXw1L8YiKIDkBgke+xbfrDwEvvjudQkl2LUL66DB11j RJU3GyxKClvdY06SSRh/H13fqZLNKh1JZ0nPEWSTJECDFN9zcDjrDrod/7PFOcpY NAlawLoGG+s= =JvpF -----END PGP SIGNATURE----- Merge tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static call support from Ingo Molnar: "This introduces static_call(), which is the idea of static_branch() applied to indirect function calls. Remove a data load (indirection) by modifying the text. They give the flexibility of function pointers, but with better performance. (This is especially important for cases where retpolines would otherwise be used, as retpolines can be pretty slow.) API overview: DECLARE_STATIC_CALL(name, func); DEFINE_STATIC_CALL(name, func); DEFINE_STATIC_CALL_NULL(name, typename); static_call(name)(args...); static_call_cond(name)(args...); static_call_update(name, func); x86 is supported via text patching, otherwise basic indirect calls are used, with function pointers. There's a second variant using inline code patching, inspired by jump-labels, implemented on x86 as well. The new APIs are utilized in the x86 perf code, a heavy user of function pointers, where static calls speed up the PMU handler by 4.2% (!). The generic implementation is not really excercised on other architectures, outside of the trivial test_static_call_init() self-test" * tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) static_call: Fix return type of static_call_init tracepoint: Fix out of sync data passing by static caller tracepoint: Fix overly long tracepoint names x86/perf, static_call: Optimize x86_pmu methods tracepoint: Optimize using static_call() static_call: Allow early init static_call: Add some validation static_call: Handle tail-calls static_call: Add static_call_cond() x86/alternatives: Teach text_poke_bp() to emulate RET static_call: Add simple self-test for static calls x86/static_call: Add inline static call implementation for x86-64 x86/static_call: Add out-of-line static call implementation static_call: Avoid kprobes on inline static_call()s static_call: Add inline static call infrastructure static_call: Add basic static call infrastructure compiler.h: Make __ADDRESSABLE() symbol truly unique jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved() module: Properly propagate MODULE_STATE_COMING failure module: Fix up module_notifier return values ... |
||
Linus Torvalds
|
34eb62d868 |
Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU w/6GpzAa+7g= =fXAw -----END PGP SIGNATURE----- Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull orphan section checking from Ingo Molnar: "Orphan link sections were a long-standing source of obscure bugs, because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms" * tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/boot/compressed: Warn on orphan section placement x86/build: Warn on orphan section placement arm/boot: Warn on orphan section placement arm/build: Warn on orphan section placement arm64/build: Warn on orphan section placement x86/boot/compressed: Add missing debugging sections to output x86/boot/compressed: Remove, discard, or assert for unwanted sections x86/boot/compressed: Reorganize zero-size section asserts x86/build: Add asserts for unwanted sections x86/build: Enforce an empty .got.plt section x86/asm: Avoid generating unused kprobe sections arm/boot: Handle all sections explicitly arm/build: Assert for unwanted sections arm/build: Add missing sections arm/build: Explicitly keep .ARM.attributes sections arm/build: Refactor linker script headers arm64/build: Assert for unwanted sections arm64/build: Add missing DWARF sections arm64/build: Use common DISCARDS in linker script arm64/build: Remove .eh_frame* sections due to unwind tables ... |
||
Peter Zijlstra
|
29f006fdef |
asm-generic/atomic: Add try_cmpxchg() fallbacks
Only x86 provides try_cmpxchg() outside of the atomic_t interfaces, provide generic fallbacks to create this interface from the widely available cmpxchg() function. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/159870621515.1229682.15506193091065001742.stgit@devnote2 |
||
Brendan Higgins
|
90a025a859 |
vmlinux.lds.h: add linker section for KUnit test suites
Add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. Co-developed-by: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Ingo Molnar
|
d6c4c11348 |
Merge branch 'kcsan' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull KCSAN updates for v5.10 from Paul E. McKenney: - Improve kernel messages. - Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y. - Optimize debugfs stat counters. - Introduce the instrument_*read_write() annotations, to provide a finer description of certain ops - using KCSAN's compound instrumentation. Use them for atomic RNW and bitops, where appropriate. Doing this might find new races. (Depends on the compiler having tsan-compound-read-before-write=1 support.) - Support atomic built-ins, which will help certain architectures, such as s390. - Misc enhancements and smaller fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org> |