forked from Minki/linux
1eff1a1dee
400 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Matthew Garrett
|
1a3881d305 |
apparmor: Fix regression in profile conflict logic
The intended behaviour in apparmor profile matching is to flag a
conflict if two profiles match equally well. However, right now a
conflict is generated if another profile has the same match length even
if that profile doesn't actually match. Fix the logic so we only
generate a conflict if the profiles match.
Fixes:
|
||
John Johansen
|
0dda0b3fb2 |
apparmor: fix ptrace label match when matching stacked labels
Given a label with a profile stack of
A//&B or A//&C ...
A ptrace rule should be able to specify a generic trace pattern with
a rule like
ptrace trace A//&**,
however this is failing because while the correct label match routine
is called, it is being done post label decomposition so it is always
being done against a profile instead of the stacked label.
To fix this refactor the cross check to pass the full peer label in to
the label_match.
Fixes:
|
||
|
John Johansen
|
5b9f57cf47 |
apparmor: fix regression in mount mediation when feature set is pinned
When the mount code was refactored for Labels it was not correctly
updated to check whether policy supported mediation of the mount
class. This causes a regression when the kernel feature set is
reported as supporting mount and policy is pinned to a feature set
that does not support mount mediation.
BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41
Fixes:
|
||
Linus Torvalds
|
df8ba95c57 |
bug fixes:
- apparmor: fix oops in audit_signal_cb hook -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJaICSrAAoJEAUvNnAY1cPYqJwQAJ7HevfF1/jFGHMJF7cv557H 8+oux675tr1g5MC0QdkkjPaF/0UbIEktnJaxAId/oCzY7wU/GRiz3iFrsKZC2RVu pfvhZ5dqzYblwiqD1d2soIHexO0QnlAkV+monAHM9VbmPK45A6PJn8/2KTUYG7J2 O/XPp7W5G/fdjVG8zoiX+7Y7P9a+gKLMYQOtM0lxwMhlt5jXzozyuWvFiZ8S8jvw F0HrymQGoNeHRfhIhsesP6rNDAW8ywH6702NtQOU/dyHO13I+4zW/PkWQNNwAu7W Lg/8xEv5km3eA7H1qtFMSlSSl1T67BGRdo7CQ2kkWE6O6ne+LsbO+P/bFKV1v/9l WrLZlPSm5AlW2kWpTInZ1CWqggLUxB7p/jrNH5EJBBuqWAqdmbdHygKThdrT51Vc goSPvL/WjnZoJjMyOt3nrDSVvMip0XRD24X7ey2sgdqjkVOLHcLNCWS4iLps4wcb 4GLQguR7Hf/a6dbSqsdelStQDVw5JIYKrRffnITX9qgi4Ul+Jj99Qxwhh88CGKu/ 8/7ka0/pT5Ag2VcxWGwUbEroHNBU6mj9iBH2wLdvVXBM6TPS3CvjKlulVMXkKjZY 66k8ZLzEfbHsU3nAW5qVHAp9mm3vmTfSJOVXh83LrKQt/o2lIdzJhZucjWm+qFxu Sd0wk4wp679dtWgXKIdd =xfD+ -----END PGP SIGNATURE----- Merge tag 'apparmor-pr-2017-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor bugfix from John Johansen: "Fix oops in audit_signal_cb hook marked for stable" * tag 'apparmor-pr-2017-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix oops in audit_signal_cb hook |
||
|
John Johansen
|
b12cbb2158 |
apparmor: fix oops in audit_signal_cb hook
The apparmor_audit_data struct ordering got messed up during a merge conflict, resulting in the signal integer and peer pointer being in a union instead of a struct. For most of the 4.13 and 4.14 life cycle, this was hidden by commit |
||
|
Linus Torvalds
|
1751e8a6cb |
Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
26064dea2d |
+ Cleanups
- apparmor: fix spelling mistake: "resoure" -> "resource" - apparmor: remove unused redundant variable stop - apparmor: Fix bool initialization/comparison + Bug Fixes - apparmor: initialized returned struct aa_perms - apparmor: fix leak of null profile name if profile allocation fails - apparmor: ensure that undecidable profile attachments fail - apparmor: fix profile attachment for special unconfined profiles - apparmor: fix locking when creating a new complain profile. - apparmor: fix possible recursive lock warning in __aa_create_ns -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJaFFMGAAoJEAUvNnAY1cPY+sEQAK3H5kU+WDzEaMyzCSYEF4p2 ivlgzEDOvhf+R1nLTEYg2AThUpE0oD2rg78w2T7h19OyTH/mINofOIukDkz+lyRX 4AXRqLUUf6MXds3yY/m0HCcpE9cRQQEsKT4XDXf1PpsRHKmle+cZbbmKmyCrmAB3 gRaYGghuIbMlux8nzDZH3osLfdeyKMKgUPCeOvtzO17iZD1RrTjtvfI66Q1KSifu 3QxTMt7nDYl/i4Owq5NoSF9rVrgDvs9oruuAb25frlCncdBC/dw2thCr/c362LWg 8f44iquo6benlm7z3BNHU0yAxUYPjYb8RcD3pEwIQqqRgxyuk5kSuh9FKGdo778z r8T49/4EQAtfthtmwMmlCG/vrCrGFNITXnIfALJ7mVb+u3MhOyWC/385KrYj/LaS YfCHqlxPxOTVVN2vvxMiwVNU2GpTNa/wfpkgTXVErY4OwotepHY65W/YPxaHpjgO aFbKUJ9bO6c1Im83fyEpt1RPHWvfWSbtxEZpG3d9FqfAexYUJrF7DQW2SfcEFYr6 VzMSrpk3/vESZFUmGzFqrhEku8bu8CeEhB5aU3Tvavx64AMOR59niXzkZspM8P9j x/IuizHClrYR3TQAyp7Dtl9J2s25GbUkZMNlx0d6X9ILgzHATusrlO+1D+hWy3pm 9HN3wpEXC1BwLYUcp60M =xeyB -----END PGP SIGNATURE----- Merge tag 'apparmor-pr-2017-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "No features this time, just minor cleanups and bug fixes. Cleanups: - fix spelling mistake: "resoure" -> "resource" - remove unused redundant variable stop - Fix bool initialization/comparison Bug Fixes: - initialized returned struct aa_perms - fix leak of null profile name if profile allocation fails - ensure that undecidable profile attachments fail - fix profile attachment for special unconfined profiles - fix locking when creating a new complain profile. - fix possible recursive lock warning in __aa_create_ns" * tag 'apparmor-pr-2017-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix possible recursive lock warning in __aa_create_ns apparmor: fix locking when creating a new complain profile. apparmor: fix profile attachment for special unconfined profiles apparmor: ensure that undecidable profile attachments fail apparmor: fix leak of null profile name if profile allocation fails apparmor: remove unused redundant variable stop apparmor: Fix bool initialization/comparison apparmor: initialized returned struct aa_perms apparmor: fix spelling mistake: "resoure" -> "resource" |
||
|
John Johansen
|
feb3c766a3 |
apparmor: fix possible recursive lock warning in __aa_create_ns
Use mutex_lock_nested to provide lockdep the parent child lock ordering of
the tree.
This fixes the lockdep Warning
[ 305.275177] ============================================
[ 305.275178] WARNING: possible recursive locking detected
[ 305.275179] 4.14.0-rc7+ #320 Not tainted
[ 305.275180] --------------------------------------------
[ 305.275181] apparmor_parser/1339 is trying to acquire lock:
[ 305.275182] (&ns->lock){+.+.}, at: [<ffffffff970544dd>] __aa_create_ns+0x6d/0x1e0
[ 305.275187]
but task is already holding lock:
[ 305.275187] (&ns->lock){+.+.}, at: [<ffffffff97054b5d>] aa_prepare_ns+0x3d/0xd0
[ 305.275190]
other info that might help us debug this:
[ 305.275191] Possible unsafe locking scenario:
[ 305.275192] CPU0
[ 305.275193] ----
[ 305.275193] lock(&ns->lock);
[ 305.275194] lock(&ns->lock);
[ 305.275195]
*** DEADLOCK ***
[ 305.275196] May be due to missing lock nesting notation
[ 305.275198] 2 locks held by apparmor_parser/1339:
[ 305.275198] #0: (sb_writers#10){.+.+}, at: [<ffffffff96e9c6b7>] vfs_write+0x1a7/0x1d0
[ 305.275202] #1: (&ns->lock){+.+.}, at: [<ffffffff97054b5d>] aa_prepare_ns+0x3d/0xd0
[ 305.275205]
stack backtrace:
[ 305.275207] CPU: 1 PID: 1339 Comm: apparmor_parser Not tainted 4.14.0-rc7+ #320
[ 305.275208] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[ 305.275209] Call Trace:
[ 305.275212] dump_stack+0x85/0xcb
[ 305.275214] __lock_acquire+0x141c/0x1460
[ 305.275216] ? __aa_create_ns+0x6d/0x1e0
[ 305.275218] ? ___slab_alloc+0x183/0x540
[ 305.275219] ? ___slab_alloc+0x183/0x540
[ 305.275221] lock_acquire+0xed/0x1e0
[ 305.275223] ? lock_acquire+0xed/0x1e0
[ 305.275224] ? __aa_create_ns+0x6d/0x1e0
[ 305.275227] __mutex_lock+0x89/0x920
[ 305.275228] ? __aa_create_ns+0x6d/0x1e0
[ 305.275230] ? trace_hardirqs_on_caller+0x11f/0x190
[ 305.275231] ? __aa_create_ns+0x6d/0x1e0
[ 305.275233] ? __lockdep_init_map+0x57/0x1d0
[ 305.275234] ? lockdep_init_map+0x9/0x10
[ 305.275236] ? __rwlock_init+0x32/0x60
[ 305.275238] mutex_lock_nested+0x1b/0x20
[ 305.275240] ? mutex_lock_nested+0x1b/0x20
[ 305.275241] __aa_create_ns+0x6d/0x1e0
[ 305.275243] aa_prepare_ns+0xc2/0xd0
[ 305.275245] aa_replace_profiles+0x168/0xf30
[ 305.275247] ? __might_fault+0x85/0x90
[ 305.275250] policy_update+0xb9/0x380
[ 305.275252] profile_load+0x7e/0x90
[ 305.275254] __vfs_write+0x28/0x150
[ 305.275256] ? rcu_read_lock_sched_held+0x72/0x80
[ 305.275257] ? rcu_sync_lockdep_assert+0x2f/0x60
[ 305.275259] ? __sb_start_write+0xdc/0x1c0
[ 305.275261] ? vfs_write+0x1a7/0x1d0
[ 305.275262] vfs_write+0xca/0x1d0
[ 305.275264] ? trace_hardirqs_on_caller+0x11f/0x190
[ 305.275266] SyS_write+0x49/0xa0
[ 305.275268] entry_SYSCALL_64_fastpath+0x23/0xc2
[ 305.275271] RIP: 0033:0x7fa6b22e8c74
[ 305.275272] RSP: 002b:00007ffeaaee6288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 305.275273] RAX: ffffffffffffffda RBX: 00007ffeaaee62a4 RCX: 00007fa6b22e8c74
[ 305.275274] RDX: 0000000000000a51 RSI: 00005566a8198c10 RDI: 0000000000000004
[ 305.275275] RBP: 0000000000000a39 R08: 0000000000000a51 R09: 0000000000000000
[ 305.275276] R10: 0000000000000000 R11: 0000000000000246 R12: 00005566a8198c10
[ 305.275277] R13: 0000000000000004 R14: 00005566a72ecb88 R15: 00005566a72ec3a8
Fixes:
|
||
|
John Johansen
|
5d7c44ef5e |
apparmor: fix locking when creating a new complain profile.
Break the per cpu buffer atomic section when creating a new null
complain profile. In learning mode this won't matter and we can
safely re-aquire the buffer.
This fixes the following lockdep BUG trace
nov. 14 14:09:09 cyclope audit[7152]: AVC apparmor="ALLOWED" operation="exec" profile="/usr/sbin/sssd" name="/usr/sbin/adcli" pid=7152 comm="sssd_be" requested_mask="x" denied_mask="x" fsuid=0 ouid=0 target="/usr/sbin/sssd//null-/usr/sbin/adcli"
nov. 14 14:09:09 cyclope kernel: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
nov. 14 14:09:09 cyclope kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 7152, name: sssd_be
nov. 14 14:09:09 cyclope kernel: 1 lock held by sssd_be/7152:
nov. 14 14:09:09 cyclope kernel: #0: (&sig->cred_guard_mutex){....}, at: [<ffffffff8182d53e>] prepare_bprm_creds+0x4e/0x100
nov. 14 14:09:09 cyclope kernel: CPU: 3 PID: 7152 Comm: sssd_be Not tainted 4.14.0prahal+intel #150
nov. 14 14:09:09 cyclope kernel: Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET53WW (1.33 ) 09/15/2017
nov. 14 14:09:09 cyclope kernel: Call Trace:
nov. 14 14:09:09 cyclope kernel: dump_stack+0xb0/0x135
nov. 14 14:09:09 cyclope kernel: ? _atomic_dec_and_lock+0x15b/0x15b
nov. 14 14:09:09 cyclope kernel: ? lockdep_print_held_locks+0xc4/0x130
nov. 14 14:09:09 cyclope kernel: ___might_sleep+0x29c/0x320
nov. 14 14:09:09 cyclope kernel: ? rq_clock+0xf0/0xf0
nov. 14 14:09:09 cyclope kernel: ? __kernel_text_address+0xd/0x40
nov. 14 14:09:09 cyclope kernel: __might_sleep+0x95/0x190
nov. 14 14:09:09 cyclope kernel: ? aa_new_null_profile+0x50a/0x960
nov. 14 14:09:09 cyclope kernel: __mutex_lock+0x13e/0x1a20
nov. 14 14:09:09 cyclope kernel: ? aa_new_null_profile+0x50a/0x960
nov. 14 14:09:09 cyclope kernel: ? save_stack+0x43/0xd0
nov. 14 14:09:09 cyclope kernel: ? kmem_cache_alloc_trace+0x13f/0x290
nov. 14 14:09:09 cyclope kernel: ? mutex_lock_io_nested+0x1880/0x1880
nov. 14 14:09:09 cyclope kernel: ? profile_transition+0x932/0x2d40
nov. 14 14:09:09 cyclope kernel: ? apparmor_bprm_set_creds+0x1479/0x1f70
nov. 14 14:09:09 cyclope kernel: ? security_bprm_set_creds+0x5a/0x80
nov. 14 14:09:09 cyclope kernel: ? prepare_binprm+0x366/0x980
nov. 14 14:09:09 cyclope kernel: ? do_execveat_common.isra.30+0x12a9/0x2350
nov. 14 14:09:09 cyclope kernel: ? SyS_execve+0x2c/0x40
nov. 14 14:09:09 cyclope kernel: ? do_syscall_64+0x228/0x650
nov. 14 14:09:09 cyclope kernel: ? entry_SYSCALL64_slow_path+0x25/0x25
nov. 14 14:09:09 cyclope kernel: ? deactivate_slab.isra.62+0x49d/0x5e0
nov. 14 14:09:09 cyclope kernel: ? save_stack_trace+0x16/0x20
nov. 14 14:09:09 cyclope kernel: ? init_object+0x88/0x90
nov. 14 14:09:09 cyclope kernel: ? ___slab_alloc+0x520/0x590
nov. 14 14:09:09 cyclope kernel: ? ___slab_alloc+0x520/0x590
nov. 14 14:09:09 cyclope kernel: ? aa_alloc_proxy+0xab/0x200
nov. 14 14:09:09 cyclope kernel: ? lock_downgrade+0x7e0/0x7e0
nov. 14 14:09:09 cyclope kernel: ? memcg_kmem_get_cache+0x970/0x970
nov. 14 14:09:09 cyclope kernel: ? kasan_unpoison_shadow+0x35/0x50
nov. 14 14:09:09 cyclope kernel: ? kasan_unpoison_shadow+0x35/0x50
nov. 14 14:09:09 cyclope kernel: ? kasan_kmalloc+0xad/0xe0
nov. 14 14:09:09 cyclope kernel: ? aa_alloc_proxy+0xab/0x200
nov. 14 14:09:09 cyclope kernel: ? kmem_cache_alloc_trace+0x13f/0x290
nov. 14 14:09:09 cyclope kernel: ? aa_alloc_proxy+0xab/0x200
nov. 14 14:09:09 cyclope kernel: ? aa_alloc_proxy+0xab/0x200
nov. 14 14:09:09 cyclope kernel: ? _raw_spin_unlock+0x22/0x30
nov. 14 14:09:09 cyclope kernel: ? vec_find+0xa0/0xa0
nov. 14 14:09:09 cyclope kernel: ? aa_label_init+0x6f/0x230
nov. 14 14:09:09 cyclope kernel: ? __label_insert+0x3e0/0x3e0
nov. 14 14:09:09 cyclope kernel: ? kmem_cache_alloc_trace+0x13f/0x290
nov. 14 14:09:09 cyclope kernel: ? aa_alloc_profile+0x58/0x200
nov. 14 14:09:09 cyclope kernel: mutex_lock_nested+0x16/0x20
nov. 14 14:09:09 cyclope kernel: ? mutex_lock_nested+0x16/0x20
nov. 14 14:09:09 cyclope kernel: aa_new_null_profile+0x50a/0x960
nov. 14 14:09:09 cyclope kernel: ? aa_fqlookupn_profile+0xdc0/0xdc0
nov. 14 14:09:09 cyclope kernel: ? aa_compute_fperms+0x4b5/0x640
nov. 14 14:09:09 cyclope kernel: ? disconnect.isra.2+0x1b0/0x1b0
nov. 14 14:09:09 cyclope kernel: ? aa_str_perms+0x8d/0xe0
nov. 14 14:09:09 cyclope kernel: profile_transition+0x932/0x2d40
nov. 14 14:09:09 cyclope kernel: ? up_read+0x1a/0x40
nov. 14 14:09:09 cyclope kernel: ? ext4_xattr_get+0x15c/0xaf0 [ext4]
nov. 14 14:09:09 cyclope kernel: ? x_table_lookup+0x190/0x190
nov. 14 14:09:09 cyclope kernel: ? ext4_xattr_ibody_get+0x590/0x590 [ext4]
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? ext4_xattr_security_get+0x1a/0x20 [ext4]
nov. 14 14:09:09 cyclope kernel: ? __vfs_getxattr+0x6d/0xa0
nov. 14 14:09:09 cyclope kernel: ? get_vfs_caps_from_disk+0x114/0x720
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? tsc_resume+0x10/0x10
nov. 14 14:09:09 cyclope kernel: ? get_vfs_caps_from_disk+0x720/0x720
nov. 14 14:09:09 cyclope kernel: ? native_sched_clock_from_tsc+0x201/0x2b0
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? sched_clock_cpu+0x1b/0x170
nov. 14 14:09:09 cyclope kernel: ? find_held_lock+0x3c/0x1e0
nov. 14 14:09:09 cyclope kernel: ? rb_insert_color_cached+0x1660/0x1660
nov. 14 14:09:09 cyclope kernel: apparmor_bprm_set_creds+0x1479/0x1f70
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? handle_onexec+0x31d0/0x31d0
nov. 14 14:09:09 cyclope kernel: ? tsc_resume+0x10/0x10
nov. 14 14:09:09 cyclope kernel: ? graph_lock+0xd0/0xd0
nov. 14 14:09:09 cyclope kernel: ? tsc_resume+0x10/0x10
nov. 14 14:09:09 cyclope kernel: ? sched_clock_cpu+0x1b/0x170
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? sched_clock+0x9/0x10
nov. 14 14:09:09 cyclope kernel: ? sched_clock_cpu+0x1b/0x170
nov. 14 14:09:09 cyclope kernel: ? find_held_lock+0x3c/0x1e0
nov. 14 14:09:09 cyclope kernel: security_bprm_set_creds+0x5a/0x80
nov. 14 14:09:09 cyclope kernel: prepare_binprm+0x366/0x980
nov. 14 14:09:09 cyclope kernel: ? install_exec_creds+0x150/0x150
nov. 14 14:09:09 cyclope kernel: ? __might_fault+0x89/0xb0
nov. 14 14:09:09 cyclope kernel: ? up_read+0x40/0x40
nov. 14 14:09:09 cyclope kernel: ? get_user_arg_ptr.isra.18+0x2c/0x70
nov. 14 14:09:09 cyclope kernel: ? count.isra.20.constprop.32+0x7c/0xf0
nov. 14 14:09:09 cyclope kernel: do_execveat_common.isra.30+0x12a9/0x2350
nov. 14 14:09:09 cyclope kernel: ? prepare_bprm_creds+0x100/0x100
nov. 14 14:09:09 cyclope kernel: ? _raw_spin_unlock+0x22/0x30
nov. 14 14:09:09 cyclope kernel: ? deactivate_slab.isra.62+0x49d/0x5e0
nov. 14 14:09:09 cyclope kernel: ? save_stack_trace+0x16/0x20
nov. 14 14:09:09 cyclope kernel: ? init_object+0x88/0x90
nov. 14 14:09:09 cyclope kernel: ? ___slab_alloc+0x520/0x590
nov. 14 14:09:09 cyclope kernel: ? ___slab_alloc+0x520/0x590
nov. 14 14:09:09 cyclope kernel: ? kasan_check_write+0x14/0x20
nov. 14 14:09:09 cyclope kernel: ? memcg_kmem_get_cache+0x970/0x970
nov. 14 14:09:09 cyclope kernel: ? kasan_unpoison_shadow+0x35/0x50
nov. 14 14:09:09 cyclope kernel: ? glob_match+0x730/0x730
nov. 14 14:09:09 cyclope kernel: ? kmem_cache_alloc+0x225/0x280
nov. 14 14:09:09 cyclope kernel: ? getname_flags+0xb8/0x510
nov. 14 14:09:09 cyclope kernel: ? mm_fault_error+0x2e0/0x2e0
nov. 14 14:09:09 cyclope kernel: ? getname_flags+0xf6/0x510
nov. 14 14:09:09 cyclope kernel: ? ptregs_sys_vfork+0x10/0x10
nov. 14 14:09:09 cyclope kernel: SyS_execve+0x2c/0x40
nov. 14 14:09:09 cyclope kernel: do_syscall_64+0x228/0x650
nov. 14 14:09:09 cyclope kernel: ? syscall_return_slowpath+0x2f0/0x2f0
nov. 14 14:09:09 cyclope kernel: ? syscall_return_slowpath+0x167/0x2f0
nov. 14 14:09:09 cyclope kernel: ? prepare_exit_to_usermode+0x220/0x220
nov. 14 14:09:09 cyclope kernel: ? prepare_exit_to_usermode+0xda/0x220
nov. 14 14:09:09 cyclope kernel: ? perf_trace_sys_enter+0x1060/0x1060
nov. 14 14:09:09 cyclope kernel: ? __put_user_4+0x1c/0x30
nov. 14 14:09:09 cyclope kernel: entry_SYSCALL64_slow_path+0x25/0x25
nov. 14 14:09:09 cyclope kernel: RIP: 0033:0x7f9320f23637
nov. 14 14:09:09 cyclope kernel: RSP: 002b:00007fff783be338 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
nov. 14 14:09:09 cyclope kernel: RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9320f23637
nov. 14 14:09:09 cyclope kernel: RDX: 0000558c35002a70 RSI: 0000558c3505bd10 RDI: 0000558c35018b90
nov. 14 14:09:09 cyclope kernel: RBP: 0000558c34b63ae8 R08: 0000558c3505bd10 R09: 0000000000000080
nov. 14 14:09:09 cyclope kernel: R10: 0000000000000095 R11: 0000000000000202 R12: 0000000000000001
nov. 14 14:09:09 cyclope kernel: R13: 0000558c35018b90 R14: 0000558c3505bd18 R15: 0000558c3505bd10
Fixes:
|
||
|
John Johansen
|
06d426d113 |
apparmor: fix profile attachment for special unconfined profiles
It used to be that unconfined would never attach. However that is not
the case anymore as some special profiles can be marked as unconfined,
that are not the namespaces unconfined profile, and may have an
attachment.
Fixes:
|
||
|
John Johansen
|
844b8292b6 |
apparmor: ensure that undecidable profile attachments fail
Profiles that have an undecidable overlap in their attachments are
being incorrectly handled. Instead of failing to attach the first one
encountered is being used.
eg.
profile A /** { .. }
profile B /*foo { .. }
have an unresolvable longest left attachment, they both have an exact
match on / and then have an overlapping expression that has no clear
winner.
Currently the winner will be the profile that is loaded first which
can result in non-deterministic behavior. Instead in this situation
the exec should fail.
Fixes:
|
||
|
John Johansen
|
4633307e5e |
apparmor: fix leak of null profile name if profile allocation fails
Fixes:
|
||
Colin Ian King
|
e3bcfc1485 |
apparmor: remove unused redundant variable stop
The boolean variable 'stop' is being set but never read. This is a redundant variable and can be removed. Cleans up clang warning: Value stored to 'stop' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
Thomas Meyer
|
954317fef2 |
apparmor: Fix bool initialization/comparison
Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
Arnd Bergmann
|
7bba39ae52 |
apparmor: initialized returned struct aa_perms
gcc-4.4 points out suspicious code in compute_mnt_perms, where
the aa_perms structure is only partially initialized before getting
returned:
security/apparmor/mount.c: In function 'compute_mnt_perms':
security/apparmor/mount.c:227: error: 'perms.prompt' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.hide' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.cond' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.complain' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.stop' is used uninitialized in this function
security/apparmor/mount.c:227: error: 'perms.deny' is used uninitialized in this function
Returning or assigning partially initialized structures is a bit tricky,
in particular it is explicitly allowed in c99 to assign a partially
initialized structure to another, as long as only members are read that
have been initialized earlier. Looking at what various compilers do here,
the version that produced the warning copied uninitialized stack data,
while newer versions (and also clang) either set the other members to
zero or don't update the parts of the return buffer that are not modified
in the temporary structure, but they never warn about this.
In case of apparmor, it seems better to be a little safer and always
initialize the aa_perms structure. Most users already do that, this
changes the remaining ones, including the one instance that I got the
warning for.
Fixes: fa488437d0f9 ("apparmor: add mount mediation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
||
|
Colin Ian King
|
5933a62708 |
apparmor: fix spelling mistake: "resoure" -> "resource"
Trivial fix to spelling mistake in comment and also with text in audit_resource call. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
Linus Torvalds
|
1be2172e96 |
Modules updates for v4.15
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCgAGBQJaDCyzAAoJEMBFfjjOO8FyaYQP/AwHBy6XmwwVlWDP4BqIF6hL
Vhy3ccVLYEORvePv68tWSRPUz5n6+1Ebqanmwtkw6i8l+KwxY2SfkZql09cARc33
2iBE4bHF98iWQmnJbF6me80fedY9n5bZJNMQKEF9VozJWwTMOTQFTCfmyJRDBmk9
iidQj6M3idbSUOYIJjvc40VGx5NyQWSr+FFfqsz1rU5iLGRGEvA3I2/CDT0oTuV6
D4MmFxzE2Tv/vIMa2GzKJ1LGScuUfSjf93Lq9Kk0cG36qWao8l930CaXyVdE9WJv
bkUzpf3QYv/rDX6QbAGA0cada13zd+dfBr8YhchclEAfJ+GDLjMEDu04NEmI6KUT
5lP0Xw0xYNZQI7bkdxDMhsj5jaz/HJpXCjPCtZBnSEKiL4OPXVMe+pBHoCJ2/yFN
6M716XpWYgUviUOdiE+chczB5p3z4FA6u2ykaM4Tlk0btZuHGxjcSWwvcIdlPmjm
kY4AfDV6K0bfEBVguWPJicvrkx44atqT5nWbbPhDwTSavtsuRJLb3GCsHedx7K8h
ZO47lCQFAWCtrycK1HYw+oupNC3hYWQ0SR42XRdGhL1bq26C+1sei1QhfqSgA9PQ
7CwWH4UTOL9fhtrzSqZngYOh9sjQNFNefqQHcecNzcEjK2vjrgQZvRNWZKHSwaFs
fbGX8juZWP4ypbK+irTB
=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
|
||
|
Linus Torvalds
|
8e9a2dba86 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
|
||
|
John Johansen
|
f7dc4c9a85 |
apparmor: fix off-by-one comparison on MAXMAPPED_SIG
This came in yesterday, and I have verified our regression tests
were missing this and it can cause an oops. Please apply.
There is a an off-by-one comparision on sig against MAXMAPPED_SIG
that can lead to a read outside the sig_map array if sig
is MAXMAPPED_SIG. Fix this.
Verified that the check is an out of bounds case that can cause an oops.
Revised: add comparison fix to second case
Fixes:
|
||
Ingo Molnar
|
8c5db92a70 |
Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
ead751507d |
License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
||
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Kees Cook
|
e4dca7b7aa |
treewide: Fix function prototypes for module_param_call()
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
||
|
Linus Torvalds
|
80c094a47d |
Revert "apparmor: add base infastructure for socket mediation"
This reverts commit
|
||
Will Deacon
|
26c4eb192c |
locking/rwsem, security/apparmor: Replace homebrew use of write_can_lock() with lockdep
The lockdep subsystem provides a robust way to assert that a lock is held, so use that instead of write_can_lock, which can give incorrect results for qrwlocks. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: John Johansen <john.johansen@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1507055129-12300-1-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
79444df4e7 |
+ Features
- in preparation for secid mapping add support for absolute root view
based labels
- add base infastructure for socket mediation
- add mount mediation
- add signal mediation
+ minor cleanups and changes
- be defensive, ensure unconfined profiles have dfas initialized
- add more debug asserts to apparmorfs
- enable policy unpacking to audit different reasons for failure
- cleanup conditional check for label in label_print
- Redundant condition: prev_ns. in [label.c:1498]
+ Bug Fixes
- fix regression in apparmorfs DAC access permissions
- fix build failure on sparc caused by undeclared signals
- fix sparse report of incorrect type assignment when freeing label proxies
- fix race condition in null profile creation
- Fix an error code in aafs_create()
- Fix logical error in verify_header()
- Fix shadowed local variable in unpack_trans_table()
-----BEGIN PGP SIGNATURE-----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=iDCd
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This is the apparmor pull request, similar to SELinux and seccomp.
It's the same series that I was sent to James' security tree + one
regression fix that was found after the series was sent to James and
would have been sent for v4.14-rc2.
Features:
- in preparation for secid mapping add support for absolute root view
based labels
- add base infastructure for socket mediation
- add mount mediation
- add signal mediation
minor cleanups and changes:
- be defensive, ensure unconfined profiles have dfas initialized
- add more debug asserts to apparmorfs
- enable policy unpacking to audit different reasons for failure
- cleanup conditional check for label in label_print
- Redundant condition: prev_ns. in [label.c:1498]
Bug Fixes:
- fix regression in apparmorfs DAC access permissions
- fix build failure on sparc caused by undeclared signals
- fix sparse report of incorrect type assignment when freeing label proxies
- fix race condition in null profile creation
- Fix an error code in aafs_create()
- Fix logical error in verify_header()
- Fix shadowed local variable in unpack_trans_table()"
* tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix apparmorfs DAC access permissions
apparmor: fix build failure on sparc caused by undeclared signals
apparmor: fix incorrect type assignment when freeing proxies
apparmor: ensure unconfined profiles have dfas initialized
apparmor: fix race condition in null profile creation
apparmor: move new_null_profile to after profile lookup fns()
apparmor: add base infastructure for socket mediation
apparmor: add more debug asserts to apparmorfs
apparmor: make policy_unpack able to audit different info messages
apparmor: add support for absolute root view based labels
apparmor: cleanup conditional check for label in label_print
apparmor: add mount mediation
apparmor: add the ability to mediate signals
apparmor: Redundant condition: prev_ns. in [label.c:1498]
apparmor: Fix an error code in aafs_create()
apparmor: Fix logical error in verify_header()
apparmor: Fix shadowed local variable in unpack_trans_table()
|
||
|
John Johansen
|
bf81100f63 |
apparmor: fix apparmorfs DAC access permissions
The DAC access permissions for several apparmorfs files are wrong.
.access - needs to be writable by all tasks to perform queries
the others in the set only provide a read fn so should be read only.
With policy namespace virtualization all apparmor needs to control
the permission and visibility checks directly which means DAC
access has to be allowed for all user, group, and other.
BugLink: http://bugs.launchpad.net/bugs/1713103
Fixes:
|
||
|
John Johansen
|
b1545dba09 |
apparmor: fix build failure on sparc caused by undeclared signals
In file included from security/apparmor/ipc.c:23:0:
security/apparmor/include/sig_names.h:26:3: error: 'SIGSTKFLT' undeclared here (not in a function)
[SIGSTKFLT] = 16, /* -, 16, - */
^
security/apparmor/include/sig_names.h:26:3: error: array index in initializer not of integer type
security/apparmor/include/sig_names.h:26:3: note: (near initialization for 'sig_map')
security/apparmor/include/sig_names.h:51:3: error: 'SIGUNUSED' undeclared here (not in a function)
[SIGUNUSED] = 34, /* -, 31, - */
^
security/apparmor/include/sig_names.h:51:3: error: array index in initializer not of integer type
security/apparmor/include/sig_names.h:51:3: note: (near initialization for 'sig_map')
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: c6bf1adaecaa ("apparmor: add the ability to mediate signals")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
||
|
John Johansen
|
bc4d82fb94 |
apparmor: fix incorrect type assignment when freeing proxies
sparse reports poisoning the proxy->label before freeing the struct is resulting in a sparse build warning. ../security/apparmor/label.c:52:30: warning: incorrect type in assignment (different address spaces) ../security/apparmor/label.c:52:30: expected struct aa_label [noderef] <asn:4>*label ../security/apparmor/label.c:52:30: got struct aa_label *<noident> fix with RCU_INIT_POINTER as this is one of those cases where rcu_assign_pointer() is not needed. Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
John Johansen
|
15372b97aa |
apparmor: ensure unconfined profiles have dfas initialized
Generally unconfined has early bailout tests and does not need the dfas initialized, however if an early bailout test is ever missed it will result in an oops. Be defensive and initialize the unconfined profile to have null dfas (no permission) so if an early bailout test is missed we fail closed (no perms granted) instead of oopsing. Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
John Johansen
|
290638a52a |
apparmor: fix race condition in null profile creation
There is a race when null- profile is being created between the initial lookup/creation of the profile and lock/addition of the profile. This could result in multiple version of a profile being added to the list which need to be removed/replaced. Since these are learning profile their is no affect on mediation. Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
John Johansen
|
d07881d2ed |
apparmor: move new_null_profile to after profile lookup fns()
new_null_profile will need to use some of the profile lookup fns() so move instead of doing forward fn declarations. Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
John Johansen
|
651e28c553 |
apparmor: add base infastructure for socket mediation
Provide a basic mediation of sockets. This is not a full net mediation
but just whether a spcific family of socket can be used by an
application, along with setting up some basic infrastructure for
network mediation to follow.
the user space rule hav the basic form of
NETWORK RULE = [ QUALIFIERS ] 'network' [ DOMAIN ]
[ TYPE | PROTOCOL ]
DOMAIN = ( 'inet' | 'ax25' | 'ipx' | 'appletalk' | 'netrom' |
'bridge' | 'atmpvc' | 'x25' | 'inet6' | 'rose' |
'netbeui' | 'security' | 'key' | 'packet' | 'ash' |
'econet' | 'atmsvc' | 'sna' | 'irda' | 'pppox' |
'wanpipe' | 'bluetooth' | 'netlink' | 'unix' | 'rds' |
'llc' | 'can' | 'tipc' | 'iucv' | 'rxrpc' | 'isdn' |
'phonet' | 'ieee802154' | 'caif' | 'alg' | 'nfc' |
'vsock' | 'mpls' | 'ib' | 'kcm' ) ','
TYPE = ( 'stream' | 'dgram' | 'seqpacket' | 'rdm' | 'raw' |
'packet' )
PROTOCOL = ( 'tcp' | 'udp' | 'icmp' )
eg.
network,
network inet,
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
||
|
John Johansen
|
cbf2d0e1a9 |
apparmor: add more debug asserts to apparmorfs
Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Arnold <seth.arnold@canonical.com> |
||
|
John Johansen
|
2410aa96d6 |
apparmor: make policy_unpack able to audit different info messages
Switch unpack auditing to using the generic name field in the audit struct and make it so we can start adding new info messages about why an unpack failed. Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Arnold <seth.arnold@canonical.com> |
||
|
John Johansen
|
26b7899510 |
apparmor: add support for absolute root view based labels
With apparmor policy virtualization based on policy namespace View's we don't generally want/need absolute root based views, however there are cases like debugging and some secid based conversions where using a root based view is important. Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Arnold <seth.arnold@canonical.com> |
||
|
John Johansen
|
f872af75d3 |
apparmor: cleanup conditional check for label in label_print
Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Arnold <seth.arnold@canonical.com> |
||
|
John Johansen
|
2ea3ffb778 |
apparmor: add mount mediation
Add basic mount mediation. That allows controlling based on basic
mount parameters. It does not include special mount parameters for
apparmor, super block labeling, or any triggers for apparmor namespace
parameter modifications on pivot root.
default userspace policy rules have the form of
MOUNT RULE = ( MOUNT | REMOUNT | UMOUNT )
MOUNT = [ QUALIFIERS ] 'mount' [ MOUNT CONDITIONS ] [ SOURCE FILEGLOB ]
[ '->' MOUNTPOINT FILEGLOB ]
REMOUNT = [ QUALIFIERS ] 'remount' [ MOUNT CONDITIONS ]
MOUNTPOINT FILEGLOB
UMOUNT = [ QUALIFIERS ] 'umount' [ MOUNT CONDITIONS ] MOUNTPOINT FILEGLOB
MOUNT CONDITIONS = [ ( 'fstype' | 'vfstype' ) ( '=' | 'in' )
MOUNT FSTYPE EXPRESSION ]
[ 'options' ( '=' | 'in' ) MOUNT FLAGS EXPRESSION ]
MOUNT FSTYPE EXPRESSION = ( MOUNT FSTYPE LIST | MOUNT EXPRESSION )
MOUNT FSTYPE LIST = Comma separated list of valid filesystem and
virtual filesystem types (eg ext4, debugfs, etc)
MOUNT FLAGS EXPRESSION = ( MOUNT FLAGS LIST | MOUNT EXPRESSION )
MOUNT FLAGS LIST = Comma separated list of MOUNT FLAGS.
MOUNT FLAGS = ( 'ro' | 'rw' | 'nosuid' | 'suid' | 'nodev' | 'dev' |
'noexec' | 'exec' | 'sync' | 'async' | 'remount' |
'mand' | 'nomand' | 'dirsync' | 'noatime' | 'atime' |
'nodiratime' | 'diratime' | 'bind' | 'rbind' | 'move' |
'verbose' | 'silent' | 'loud' | 'acl' | 'noacl' |
'unbindable' | 'runbindable' | 'private' | 'rprivate' |
'slave' | 'rslave' | 'shared' | 'rshared' |
'relatime' | 'norelatime' | 'iversion' | 'noiversion' |
'strictatime' | 'nouser' | 'user' )
MOUNT EXPRESSION = ( ALPHANUMERIC | AARE ) ...
PIVOT ROOT RULE = [ QUALIFIERS ] pivot_root [ oldroot=OLD PUT FILEGLOB ]
[ NEW ROOT FILEGLOB ]
SOURCE FILEGLOB = FILEGLOB
MOUNTPOINT FILEGLOB = FILEGLOB
eg.
mount,
mount /dev/foo,
mount options=ro /dev/foo -> /mnt/,
mount options in (ro,atime) /dev/foo -> /mnt/,
mount options=ro options=atime,
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
||
|
John Johansen
|
cd1dbf76b2 |
apparmor: add the ability to mediate signals
Add signal mediation where the signal can be mediated based on the
signal, direction, or the label or the peer/target. The signal perms
are verified on a cross check to ensure policy consistency in the case
of incremental policy load/replacement.
The optimization of skipping the cross check when policy is guaranteed
to be consistent (single compile unit) remains to be done.
policy rules have the form of
SIGNAL_RULE = [ QUALIFIERS ] 'signal' [ SIGNAL ACCESS PERMISSIONS ]
[ SIGNAL SET ] [ SIGNAL PEER ]
SIGNAL ACCESS PERMISSIONS = SIGNAL ACCESS | SIGNAL ACCESS LIST
SIGNAL ACCESS LIST = '(' Comma or space separated list of SIGNAL
ACCESS ')'
SIGNAL ACCESS = ( 'r' | 'w' | 'rw' | 'read' | 'write' | 'send' |
'receive' )
SIGNAL SET = 'set' '=' '(' SIGNAL LIST ')'
SIGNAL LIST = Comma or space separated list of SIGNALS
SIGNALS = ( 'hup' | 'int' | 'quit' | 'ill' | 'trap' | 'abrt' |
'bus' | 'fpe' | 'kill' | 'usr1' | 'segv' | 'usr2' |
'pipe' | 'alrm' | 'term' | 'stkflt' | 'chld' | 'cont' |
'stop' | 'stp' | 'ttin' | 'ttou' | 'urg' | 'xcpu' |
'xfsz' | 'vtalrm' | 'prof' | 'winch' | 'io' | 'pwr' |
'sys' | 'emt' | 'exists' | 'rtmin+0' ... 'rtmin+32'
)
SIGNAL PEER = 'peer' '=' AARE
eg.
signal, # allow all signals
signal send set=(hup, kill) peer=foo,
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
||
|
John Johansen
|
c5561700c9 |
apparmor: Redundant condition: prev_ns. in [label.c:1498]
Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
Dan Carpenter
|
5d314a81ec |
apparmor: Fix an error code in aafs_create()
We accidentally forgot to set the error code on this path. It means we return NULL instead of an error pointer. I looked through a bunch of callers and I don't think it really causes a big issue, but the documentation says we're supposed to return error pointers here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
Christos Gkekas
|
86aea56f14 |
apparmor: Fix logical error in verify_header()
verify_header() is currently checking whether interface version is less than 5 *and* greater than 7, which always evaluates to false. Instead it should check whether it is less than 5 *or* greater than 7. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
Geert Uytterhoeven
|
19fe43a54f |
apparmor: Fix shadowed local variable in unpack_trans_table()
with W=2:
security/apparmor/policy_unpack.c: In function ‘unpack_trans_table’:
security/apparmor/policy_unpack.c:469: warning: declaration of ‘pos’ shadows a previous local
security/apparmor/policy_unpack.c:451: warning: shadowed declaration is here
Rename the old "pos" to "saved_pos" to fix this.
Fixes:
|
||
|
Kees Cook
|
993b3ab064 |
apparmor: Refactor to remove bprm_secureexec hook
The AppArmor bprm_secureexec hook can be merged with the bprm_set_creds hook since it's dealing with the same information, and all of the details are finalized during the first call to the bprm_set_creds hook via prepare_binprm() (subsequent calls due to binfmt_script, etc, are ignored via bprm->called_set_creds). Here, all the comments describe how secureexec is actually calculated during bprm_set_creds, so this actually does it, drops the bprm flag that was being used internally by AppArmor, and drops the bprm_secureexec hook. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: John Johansen <john.johansen@canonical.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Acked-by: Serge Hallyn <serge@hallyn.com> |
||
|
Kees Cook
|
ddb4a1442d |
exec: Rename bprm->cred_prepared to called_set_creds
The cred_prepared bprm flag has a misleading name. It has nothing to do with the bprm_prepare_cred hook, and actually tracks if bprm_set_creds has been called. Rename this flag and improve its comment. Cc: David Howells <dhowells@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Serge Hallyn <serge@hallyn.com> |
||
|
Linus Torvalds
|
e24dd9ee53 |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
- a major update for AppArmor. From JJ:
* several bug fixes and cleanups
* the patch to add symlink support to securityfs that was floated
on the list earlier and the apparmorfs changes that make use of
securityfs symlinks
* it introduces the domain labeling base code that Ubuntu has been
carrying for several years, with several cleanups applied. And it
converts the current mediation over to using the domain labeling
base, which brings domain stacking support with it. This finally
will bring the base upstream code in line with Ubuntu and provide
a base to upstream the new feature work that Ubuntu carries.
* This does _not_ contain any of the newer apparmor mediation
features/controls (mount, signals, network, keys, ...) that
Ubuntu is currently carrying, all of which will be RFC'd on top
of this.
- Notable also is the Infiniband work in SELinux, and the new file:map
permission. From Paul:
"While we're down to 21 patches for v4.13 (it was 31 for v4.12),
the diffstat jumps up tremendously with over 2k of line changes.
Almost all of these changes are the SELinux/IB work done by
Daniel Jurgens; some other noteworthy changes include a NFS v4.2
labeling fix, a new file:map permission, and reporting of policy
capabilities on policy load"
There's also now genfscon labeling support for tracefs, which was
lost in v4.1 with the separation from debugfs.
- Smack incorporates a safer socket check in file_receive, and adds a
cap_capable call in privilege check.
- TPM as usual has a bunch of fixes and enhancements.
- Multiple calls to security_add_hooks() can now be made for the same
LSM, to allow LSMs to have hook declarations across multiple files.
- IMA now supports different "ima_appraise=" modes (eg. log, fix) from
the boot command line.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
apparmor: put back designators in struct initialisers
seccomp: Switch from atomic_t to recount_t
seccomp: Adjust selftests to avoid double-join
seccomp: Clean up core dump logic
IMA: update IMA policy documentation to include pcr= option
ima: Log the same audit cause whenever a file has no signature
ima: Simplify policy_func_show.
integrity: Small code improvements
ima: fix get_binary_runtime_size()
ima: use ima_parse_buf() to parse template data
ima: use ima_parse_buf() to parse measurements headers
ima: introduce ima_parse_buf()
ima: Add cgroups2 to the defaults list
ima: use memdup_user_nul
ima: fix up #endif comments
IMA: Correct Kconfig dependencies for hash selection
ima: define is_ima_appraise_enabled()
ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
ima: define a set of appraisal rules requiring file signatures
ima: extend the "ima_policy" boot command line to support multiple policies
...
|
||
Stephen Rothwell
|
c4758fa592 |
apparmor: put back designators in struct initialisers
Fixes:
|
||
|
John Johansen
|
33f2eadabb |
apparmor: export that basic profile namespaces are supported
Allow userspace to detect that basic profile policy namespaces are available. Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
John Johansen
|
6c5fc8f17a |
apparmor: add stacked domain labels interface
Update the user interface to support the stacked change_profile transition. Signed-off-by: John Johansen <john.johansen@canonical.com> |
||
|
John Johansen
|
40cde7fcc3 |
apparmor: add domain label stacking info to apparmorfs
Now that the domain label transition is complete advertise it to userspace. Signed-off-by: John Johansen <john.johansen@canonical.com> |