This is used as a base board for reference core modules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Need the aon_pm_l2_intc and irq0_aon_intc descriptions, so included
those as well.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
In the default Broadcom SDK the shared override is activated for this
cache controller, do the same in the upstream code. Data and
instruction prefetching is not activated by default for this cache
controller on the bcm53xx SoC, do it manually like it is done in the
vendor SDK.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
some missed dt nodes or props for sirf dts for 4.3.
Among them:
- G2D
- PWM
- JPEG
- Multimedia
- PMU(performance monitor unit)
- GMAC
- SDR(software digital radio) and its DMA
- pinmux for NAND
- GPIO key
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=VNaC
-----END PGP SIGNATURE-----
Merge tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt
ARM: sirf: dts update for 4.3
some missed dt nodes or props for sirf dts for 4.3.
Among them:
- G2D
- PWM
- JPEG
- Multimedia
- PMU(performance monitor unit)
- GMAC
- SDR(software digital radio) and its DMA
- pinmux for NAND
- GPIO key
* tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux:
ARM: dts: atlas7: add a GPIO key for rearview button
ARM: dts: atlas7: put pinctl property to get pinmux for NAND
ARM: dts: atlas7: add software digital radio nodes and its DMA channels
ARM: dts: atlas7: add lost PWM node
ARM: dts: atlas7: add lost G2D node
ARM: dts: atlas7: add multimedia codec node
ARM: dts: atlas7: add alias name for spi device
ARM: dts: atlas7: add lost gmac node
ARM: dts: atlas7: add performance monitor unit node
ARM: dts: atlas7: add lost jpeg node
Signed-off-by: Olof Johansson <olof@lixom.net>
Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for
PH1-LD6b reference board.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[olof: sort Makefile entries]
Signed-off-by: Olof Johansson <olof@lixom.net>
Initial version of UniPhier PH1-Pro5 device tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- for exynos3250
: update video-phy node with syscon phandle
- for exynos4210
: add CPU OPP and regulator supply property
: use labels for overriding nodes for exynos4210-universal_c210
- for exynos4412-trats2
: set max17047 over heat and voltage thresholds
- for exynos5250 and 5420
: extend exynos5250/5420-pinctrl nodes using labels
: include exynos5250/5420-pinctrl after the nodes definitions
- for exynos5410-smdk5410
: clean up indentation
- for exynos5422-odroidxu3
: define default thermal-zones for exynos5422
: enable USB3 regulators, TMU and thermal-zones
: add pwm-fan node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJVwGFHAAoJEA0Cl+kVi2xqavgP/jo+jCcIZbXUGWT+zASqwhZ2
Up0V2gKRBmjnCgxcy4+dkzDsMg2ey7jW/0ueunKNtru5zKa6BUxIWvm+eE7DCI2u
5OpFkQZsmYt37xZEQsallzEKFIRhkxn7Czr11FPbt/lti5CbPc7V9bjX5XZvLXv5
prt3NyRUsTl141g/wU6Hd0giiFvK9ql+dmWrCZNTUB7XVJHOjDvnGBIkSVkIVbsc
GMMbCz/TGdurvl59oQB2DkSZVjx4A3jZ91RPlyVNBrOfEQJTNfD9/BsYy4/D9aIR
koG/jaN+nCDE3I224k90WW0CjFXEGid/83cqBKWQTtk80Tfs1lnJkW6K6krfo9WK
3oYVkRo22vCKVtEJxb4qXku4ZlPqxofbpEKGg0KIx+h69l7pSPYJTyr29P+W3zzI
b7bS2JGxGQONNQvn0RKHzpCJTaLppnEmVechra+o76t6mb4aFfoDrfQP+rmphj2q
bi4bnqnJ9mzA4+S1ASZKcIP8YwevCVANPOL3m36bEvcklKZ3e/ks7V1maNNjJ9Es
51tWsG2XcbTpLBiCw1d1X8q36YnitpWzIfJbWy8mIYqDXdeCw0+lqCEjuPxBhqee
XPvRh03tojPGyRsky0Q0RZ4BltZ824+Z71P/+SKv2TMO1SjOJsfGFwxvwlwxjQZx
83K5MVVSXkDQJRymOsWF
=gIS8
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
Samsung 1st DT updates for v4.3
- for exynos3250
: update video-phy node with syscon phandle
- for exynos4210
: add CPU OPP and regulator supply property
: use labels for overriding nodes for exynos4210-universal_c210
- for exynos4412-trats2
: set max17047 over heat and voltage thresholds
- for exynos5250 and 5420
: extend exynos5250/5420-pinctrl nodes using labels
: include exynos5250/5420-pinctrl after the nodes definitions
- for exynos5410-smdk5410
: clean up indentation
- for exynos5422-odroidxu3
: define default thermal-zones for exynos5422
: enable USB3 regulators, TMU and thermal-zones
: add pwm-fan node
* tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420
ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250
ARM: dts: Enable thermal-zones for exynos5422-odroidxu3
ARM: dts: Define default thermal-zones for exynos5422
ARM: dts: Enable TMU for exynos5422-odroidxu3
ARM: dts: Add pwm-fan node for exynos5422-odroidxu3
ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210
ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2
ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3
ARM: dts: Clean up indentation for exynos5410-smdk5410
ARM: dts: add CPU OPP and regulator supply property for exynos4210
ARM: dts: Update video-phy node with syscon phandle for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch is the touchscreen part for LCD screens sold with devkit8000
board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ebRO
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Allwinner Device Tree changes for 4.3
A bunch of device tree patches that:
- Enable the OTG controller on some boards
- Various additions to the existing boards
- New boards: A33 Ippo Q8H, Iteaduino Plus,
* tag 'sunxi-dt-for-4.3' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (35 commits)
ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq
ARM: dts: sun5i: hsg-h702: Enable USB OTG controller
ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADC
ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet
ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno
ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro
ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime
ARM: sunxi: dt: Convert users to the PIO interrupts binding
ARM: dts: sun4i: Add Iteaduino Plus A10
ARM: dts: A10s-OLinuxIno: Add a node for axp152 pmic
ARM: dts: axp152: Add a dtsi file for the axp152 pmic
ARM: dts: sun6i: Enable otg controller on the cs908
ARM: dts: sun4i: Enable otg controller on the mini-x
ARM: dts: sun4i: Enable otg controller on the ba10-tvbox
ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
devicetree: Add msi to the vendor-prefix list
ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33
ARM: dts: sun8i: sina33: Enable USB hosts
ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets
ARM: dts: sun8i: Enable USB DRC on GA10H-A33 tablets
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Devkit8000 was sold with a 4.3" LCD or 7.0" or without. This patch
creates one dts file per bundle.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit adds the support of DVI output on the devkit8000 board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit adds the support of TV output on the devkit8000 board.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The keymap is convert in devicetree from the legacy board file.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch declares the LEDB usage to the PMU stat monitor.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch links the user button to the BTN_EXTRA action.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
[tony@atomide.com: added missing sign as noted by Anthoine]
Signed-off-by: Tony Lindgren <tony@atomide.com>
DCDC5 and DCDC6 supply rtc and need to be on for accessing the module.
On A1 revision of the TPS65218, FSEAL bit would be undefined without
coin-cell present which in many cases led to it being set, causing DCDC5
and DCDC6 to stay active, but also leading to unexplained failures when
it was not. On B1 revision, FSEAL is always 0 when no coin-cell is present
so this patch is required on boards with B1 revision to ever work. This
implementation works on boards with either A1 or B1 revision and makes
sure that DCDC5 and DCDC6 always stay active.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Compared to da830-rtc compatibility am3352-rtc is more compatible to
the one in am437x. Hence adding the am3352-rtc compatible to cover the
entire feature set.
The ti,am4372-rtc has no Documentation and not used even in the driver
hence removing it.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Setup the emc pins used by external memory devices and add
configuration for the devices found on the Hitex eval board.
The Hitex eval board has a NOR Flash attached to chip select 0
and 512 kB of SRAM on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable Ethernet and add pin muxing and set the correct
frequency on the enet tx clock input.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Setup pin muxing and properties for the debug console on uart0.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Hook up LEDs on the outputs from the D-type flip-flop found on
the address/data bus.
Note that the LEDx label in the schematics is reversed in regard
to the bits on the data bus. Hence the reverse ordering used here.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Setup the emc pins used by external memory devices and add
configuration for the devices found on the EA4357 devkit.
The EA4357 devkit has a NOR Flash attached to chip select 0
and a D-type flip-flop used for LEDs on chip select 2.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable USB0 on the EA4357 devkit and setup the required USB0
control pins.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
All devices in the LPC18xx/43xx familiy contain a ARM PL172
MultiPort Memory Controller (MPMC).
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
NXP LPC185x and LPC435x/70 devices contain a ARM PL111 lcd controller.
Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the USB OTG phy under the CREG syscon node and attach it to
the USB0 EHCI controller.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Nand controller often share some pins with sd/mmc controller on
atlas and prima series, nand node can be disabled if the pins are
used by sd/mmc controller.
Signed-off-by: Huayi Li <huayi.li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds SDR(software digital raio) nodes and the DMA channels
for it.
Signed-off-by: Yonghui Zhang <yonghui.zhang@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds lost PWM node, and also fixes the ranges of its
parent node.
Signed-off-by: Guo Zeng <guo.zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds lost G2D node, and also fixes the range of its
parent node.
Signed-off-by: Dongli Li <Kasin.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds multimedia video codec node, and also fixes the
ranges of its parent node.
Signed-off-by: Xiaofeng Fei <xiaofeng.fei@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
spi framework can use alias name of spi device to retrieve the bus id,
so bus id will not be dynamical but statical and it will be easier for
test for a specified spi device with a fixed name like use spidev.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds lost ethernet gmac node, and also fix the ranges of
its parent node.
Signed-off-by: Ye He <ye.he@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
this patch adds lost jpeg node, and also fix the ranges of its
parent node.
Signed-off-by: Lily.Li <Lily.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Add eMMC pinmux and mmc2 related bits. We keep the mmc2
controller disabled as it conflits with gpmc/NAND.
To enable emmc, simply set mmc2 controller node to "okay"
and set the gpmc node to "disabled" and change the
SelEMMCorNAND gpio-hog to output-high.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On this board either eMMC or NAND can work based on the level of
spi2_cs0.gpio0_23. Add a gpio-hog to enable configuration of this
pin in the device tree.
Move pinmux for spi2_cs0 (SEL_eMMCorNANDn) out of
NAND node into gpio0 so it is initialized with gpio0.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ldo1_reg in addition to being connected to the io lines is also
connected to the card detect line. On card removal, omap_hsmmc
driver does a regulator_disable causing card detect line to be
pulled down. This raises a card insertion interrupt and once the
MMC core detects there is no card inserted, it does a
regulator disable which again raises a card insertion interrupt.
This happens in a loop causing infinite MMC interrupts.
Fix it by making ldo1_reg as always_on.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ldo1_reg in addition to being connected to the io lines is also
connected to the card detect line. On card removal, omap_hsmmc
driver does a regulator_disable causing card detect line to be
pulled down. This raises a card insertion interrupt and once the
MMC core detects there is no card inserted, it does a
regulator disable which again raises a card insertion interrupt.
This happens in a loop causing infinite MMC interrupts.
Fix it by making ldo1_reg as always_on.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
pbias-supply is initialized in dra7.dtsi. Remove redundant initialization
of pbias-supply from MMC1 dt node in am57xx-beagle-x15.dts
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SDMMC Card Detect can be used over default GPIO map.
Reported-by: Yan Liu <yan-liu@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MMC1 supports SDR104 and MMC2 supports HS200 both of which requires
192MHz clock. Set the maximum operating clock frequency to 192 MHz.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a node for evm_3v3_sd using onboard pcf GPIO expander which feeds
on to mmc vdd.
Update mapping for vmmc-supply and vmmc_aux-supply.
evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines.
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a node for evm_3v3_sd using pcf which feeds on to mmc vdd.
Update mapping for vmmc-supply and vmmc_aux-supply.
evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the Wakeup M3 IPC device node for the wkup_m3_ipc driver on
AM4372 SoC. This node uses the IPC registers, part of the Control
Module, and is therefore added as a child of the scm node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the Wakeup M3 IPC node for the wkup_m3_ipc driver on AM33xx SoCs.
This node uses the IPC registers, part of the Control Module, and is
therefore added as a child of the scm node.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
