Commit Graph

205 Commits

Author SHA1 Message Date
Ananth N Mavinakayanahalli
0dc036c91a [PATCH] Kprobes: Track kprobe on a per_cpu basis - ppc64 changes
PPC64 changes to track kprobe execution on a per-cpu basis.  We now track the
kprobe state machine independently on each cpu using an arch specific kprobe
control block.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:45 -08:00
Tim Schmielau
8c65b4a604 [PATCH] fix remaining missing includes
Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:41 -08:00
Paul Mackerras
c613523455 Merge ../linux-2.6 2005-11-07 14:42:09 +11:00
Michael Ellerman
76032de898 [PATCH] powerpc: Make ppc_md.set_dabr non 64-bit specific
Define ppc_md.set_dabr for both 32 + 64 bit. Cleanup the implementation for
pSeries also, it was needlessly complex. Now we just do two firmware tests at
setup time, and use one of two functions, rather than using one function and
testing on every call.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 13:31:13 +11:00
Paul Mackerras
2249ca9d60 powerpc: Various UP build fixes
Mostly this involves adding #include <asm/smp.h>, since that defines
things like boot_cpuid[_phys] and [gs]et_hard_smp_processor_id, which
are SMP-related but still needed on UP.  This incorporates fixes
posted by Olof Johansson and Heikki Lindholm.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 13:18:13 +11:00
John Rose
ead837174d [PATCH] dlpar enable for OF pci probe
This patch contains the arch/ppc64 bits for enabling DLPAR and PCI
Hotplug for the new OF-based PCI probe mechanism.  This code path is
currently broken.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:09:02 +11:00
Benjamin Herrenschmidt
3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Paul Mackerras
5ad5707861 powerpc: Merge smp.c and smp.h
This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-05 10:33:55 +11:00
Paul Mackerras
c3df69cd85 Merge git://oak/home/sfr/kernels/iseries/work 2005-11-04 17:03:39 +11:00
Stephen Rothwell
1970282f3b powerpc: merge tlbflush.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 16:58:59 +11:00
Michael Ellerman
dc3a9efb5e Merge with Paulus 2005-11-04 12:12:52 +11:00
Michael Ellerman
30415f6a63 powerpc: Fix random memory corruption in merged elf.h
The merged verison of ELF_CORE_COPY_REGS is basically the PPC64 version, with
a memset that came from PPC and a few types abstracted out into #defines. But
it's not _quite_ right.

The first problem is we calculate the number of registers with:
        nregs = sizeof(struct pt_regs) / sizeof(ELF_GREG_TYPE)

For a 32-bit process on a 64-bit kernel that's bogus because the registers are
64 bits, but ELF_GREG_TYPE is u32, so nregs == 88 which is wrong.

The other problem is the memset, which assumes a struct pt_regs is smaller
than a struct elf_regs. For a 32-bit process on a 64-bit kernel that's false.

The fix is to calculate the number of regs using sizeof(unsigned long), which
should always be right, and just memset the whole damn thing _before_ copying
the registers in.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-04 12:10:51 +11:00
Stephen Rothwell
9a0f78f63b powerpc: merge tlb.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 10:20:27 +11:00
Michael Ellerman
c87ef1171d powerpc: Add helper functions for synthesising instructions at runtime
There's a few places already, and soon will be more, where we synthesise
branch instructions at runtime. Rather than doing it by hand in each case,
it would make sense to have one implementation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 17:57:53 +11:00
Paul Mackerras
d3ab57ebdc Merge git://oak/home/sfr/kernels/iseries/work 2005-11-03 17:04:08 +11:00
Stephen Rothwell
5adb83c2fa powerpc: merge ucontext.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:59:17 +11:00
David Gibson
7f23292d5a [PATCH] powerpc: Keep fixing merged ipcbuf.h
Oops, replacing the two u64s in struct ipc64_perm with __u32s changed
the alignment of that structure, which could mess up userspace.
Revert to using two unsigned long longs (which is what ppc32 had
originally).  ppc64 orignally had two unsigned longs, but long long is
the same size on 64 bit, so this should be ok there too.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 16:58:17 +11:00
Stephen Rothwell
608f8b3cf3 powerpc: merge sigcontext.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:24:25 +11:00
Stephen Rothwell
da80d460bf powerpc: merge ptrace.h
Move struct ptregs32 into asm-ppc64/ppc32.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:03:07 +11:00
Stephen Rothwell
c5a1ebd245 powerpc: merge stat.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:02:23 +11:00
Michael Ellerman
e1df870d54 powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.h
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h.

The only thing that's really changed is that we now allocate crash_notes
properly on PPC32. It's address is exported via sysfs, so it's not correct
for it to be a pointer.

I've also removed some of the "we don't use this" comments, because they're
wrong (or perhaps were referring only to arch code).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:35:45 +11:00
Michael Ellerman
cab0af98df powerpc: Make set_dabr() a ppc_md function
Move pSeries specific code in set_dabr() into a ppc_md function, this will
allow us to keep plpar_wrappers.h private to platforms/pseries.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:30:49 +11:00
Paul Mackerras
f4fcbbe9a7 powerpc: Merge remaining RTAS code
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since
cell wants them as well as pseries (and chrp can use rtas-proc.c too,
at least in principle).  rtas_fw.c is gone, with its bits moved into
rtas_flash.c and rtas.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 14:41:19 +11:00
Stephen Rothwell
2be7a90675 Merge Paulus' tree 2005-11-02 18:15:43 +11:00
Stephen Rothwell
aaf8a7a294 Merge iSeries include file move 2005-11-02 16:06:03 +11:00
Kelly Daly
ecb3ca2783 modify defines according to _ASM_POWERPC_ISERIES_
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:53:01 +11:00
David Gibson
1fc8b4ef4e [PATCH] powerpc: Merge (move) numnodes.h and sparsemem.h
The ppc64 versions of numnodes.h and sparsemem.h can be safely moved
to asm-powerpc with no changes apart from changing the #define to the
standard _ASM_POWERPC_ form.  There are no ppc32 versions of these
files, because they only have any effect if CONFIG_SPARSEMEM is
enabled, which it never can be on ppc32.

Built and booted on pSeries (POWER5), built for 32-bit powermac.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:25:42 +11:00
Kelly Daly
10e8805716 fix incorrect dir
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:22:37 +11:00
Paul Mackerras
104dd65fef powerpc: clean up bug.h further
This simplifies the macros which are different between 32-bit and
64-bit.  It also fixes a couple of printks on the bug->line element,
which is now a long.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:19:47 +11:00
Paul Mackerras
b5ca71a58b Merge git://oak/home/sfr/kernels/iseries/work 2005-11-02 15:14:44 +11:00
Kelly Daly
b420677870 merge filename and modify references to iseries/vio.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:13:57 +11:00
Kelly Daly
bbc8b628b0 merge filename and modify references to iSeries/mf.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:10:38 +11:00
Kelly Daly
6cbbdabb01 merge filename and modify references to iseries/iseries_io.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:07:51 +11:00
Kelly Daly
c43a55ff4e merge filename and modify references to iseries/lpar_map.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:02:47 +11:00
Al Viro
f2cad7a8cd [PATCH] ppc bug.h namespace pollution
DATA_TYPE is really not a good thing to put into header that
gets included all over the tree...

Just make the cast always (long) and get rid of DATA_TYPE altogether.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:01:30 +11:00
Kelly Daly
59ce20bb34 merge filename and modify references to iseries/it_lp_reg_save.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 14:49:47 +11:00
David Gibson
2ff2ae7a0d [PATCH] powerpc: Merge futex.h
This patch merges the ppc32 and ppc64 versions of futex.h, essentially
by taking the ppc64 version as the powerpc version.  The old ppc32
version did not implement the futex_atomic_op_inuser() callback (it
always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32.
In fact the ppc64 version of this function is almost suitable for
ppc32 as well - the only change needed is to extend ppc_asm.h with a
macro expanding to to the right pseudo-op to store a pointer (either
".long" or ".llong").

Built and booted on pSeries.  Built for 32-bit powermac.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 14:48:18 +11:00
David Gibson
847aeb6bad [PATCH] powerpc: Fix merged ipcbuf.h
Oops, when merging ipcbuf.h, I forgot that 'u64' can't be used in
user-visible headers.  This patch corrects the problem, replacing the
unused fields with an array of four __u32s.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 14:48:05 +11:00
Kelly Daly
8875ccfb7a merge filename and modify references to iseries/it_lp_queue.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 14:13:34 +11:00
Kelly Daly
f218aab5cf merge filename and modify references to iseries/it_lp_naca.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:51:41 +11:00
Kelly Daly
7b487bb801 merge filename and modify references to iseries/it_exp_vpd_panel.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:48:25 +11:00
Kelly Daly
1ec65d76f3 merge filename and modify references to iseries/hv_types.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:46:07 +11:00
Kelly Daly
e45423eac2 merge filename and modify references to iseries/hv_lp_event.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 12:08:31 +11:00
Kelly Daly
15b1718948 merge filename and modify reference to iseries/hv_lp_config.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:55:28 +11:00
Kelly Daly
8021b8a776 merge filename and modify references to iseries/hv_call_xm.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:41:12 +11:00
Kelly Daly
50592f5d2a merge filename and modify references to iseries/hv_call_sc.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:37:22 +11:00
Kelly Daly
c0a8d05c8a merge filename and modify references to iseries/hv_call_event.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:11:11 +11:00
Paul Mackerras
89003ebf9e powerpc: Fix BUG/WARN macros for 64-bit
The bug_entry struct had an int in the middle of pointers and unsigned
longs, and the inline asm that generated the bug table entries didn't
insert the necessary padding, so the fields following it didn't get
initialized properly and an oops resulted.  This changes the int field
(the line number) to a long so that all the fields are the same size
and no padding is required.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:54:38 +11:00
David Gibson
a0e60b2033 [PATCH] powerpc: Merge bitops.h
Here's a revised version.  This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch).  In fact it is used in the powermac interrupt code
(but not on pSeries).

- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
  instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S

- ppc32 previously used a full "sync" barrier at the end of
  test_and_*_bit(), whereas ppc64 used an "isync".  The merged version
  uses "isync", since I believe that's sufficient.

- The ppc64 versions of then minix_*() bitmap functions have changed
  semantics.  Previously on ppc64, these functions were big-endian
  (that is bit 0 was the LSB in the first 64-bit, big-endian word).
  On ppc32 (and x86, for that matter, they were little-endian.  As far
  as I can tell, the big-endian usage was simply wrong - I guess
  no-one ever tried to use minixfs on ppc64.

- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
  inline (they were already out-of-line on ppc64).

- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
  the merged bitops.  What it was doing in mmu_context.h in the first
  place, I have no idea.

- The fls() function is now implemented using the cntlzw instruction
  on ppc64, instead of generic_fls(), as it already was on ppc32.

- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
  arch/ppc/Makefile.  This in turn requires some changes to
  arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.

Built and running on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:49:02 +11:00
David Gibson
031ef0a72a [PATCH] powerpc: Merge ipcbuf.h
This patch merges ppc32 and ppc64 versions of ipcbuf.h.  The merge is
essentially trivial, since the structure defined in each version was
already identical.  Only wrinkle is that the merged version now
includes linux/types.h in order to get the fixed width integer types.
In fact, the old versions probably should have been including that
anyway, since the file uses various __kernel_*_t types.

Built and booted on G5, built for 32-bit pmac, but not booted, since
the merge tree currently doesn't boot there.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:26 +11:00
Arnd Bergmann
e9add2eeb1 [PATCH] powerpc: move rtas_fw.c out of platforms/pseries
Cell uses the same code as pSeries for flashing the firmware
through rtas, so the implementation should not be part of
platforms/pseries.

Put it into arch/powerpc/kernel instead.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:59 +11:00
Arnd Bergmann
f3f66f599d [PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:44 +11:00
Kelly Daly
1da4403788 merge filename and modify references to iseries/hv_call.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-01 16:59:20 +11:00
Stephen Rothwell
48fe487156 powerpc: clean up uaccess.h
Use the best from each architecture.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 15:53:19 +11:00
Stephen Rothwell
3c4cf5ee5a powerpc: use asm-generic/termios.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:36:55 +11:00
Stephen Rothwell
870c6ff2ac powerpc: remove duplicate ioctl definitions
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:36:30 +11:00
Stephen Rothwell
5015b49448 powerpc: fix __strnlen_user in merge tree
Change USER/KERNEL_DS so that the merged version of
__strnlen_user can be used which allows us to complete the
removal of arch/ppc64/lib/.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:17 +11:00
Stephen Rothwell
2df5e8bcca powerpc: merge uaccess.h
There is still a bug to be fixed and more merging to be done.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:03 +11:00
Paul Mackerras
23fd07750a Merge ../linux-2.6 by hand 2005-10-31 13:37:12 +11:00
Paul Mackerras
cf00a8d18b powerpc: Fix bug arising from having multiple memory_limit variables
We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line.  This puts the declaration
in system.h and the definition in mem.c.  This also moves the
definition of tce_alloc_start/end out of setup_64.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:07:02 +11:00
Roland Dreier
8b150478ae [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addresses
Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:25:49 +10:00
Paul Mackerras
f78541dcec powerpc: Merge xmon
The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:53:37 +10:00
Paul Mackerras
c032524f0d powerpc: Make single-stepping emulation (mostly) usable on 32-bit
The sc instruction emulation can't be done the same way on 32-bit
as 64-bit yet, but this should work OK.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:48:08 +10:00
Paul Mackerras
6316222ea0 powerpc: Introduce toreal/fromreal assembly macros
On 32-bit platforms, these convert from kernel virtual addresses
to real (physical addresses), like tophys/tovirt but they use
the same register for the source and destination.  On 64-bit
platforms, they do nothing because the hardware ignores the top
two bits of the address in real mode.

These new macros are used in fpu.S now.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 22:44:39 +10:00
David Gibson
328985b2c6 [PATCH] powerpc: Don't use kmalloc() for kernel stacks
In readiness for 64k pages, when THREAD_SIZE will be less than
PAGE_SIZE, ppc64 uses kmalloc() rather than __get_free_pages() to
allocate kernel stacks, and since thread_info.h was merged, so does
ppc32.  However that adds some overhead which we don't really want
when PAGE_SIZE <= THREAD_SIZE (including all ppc32 machines), so this
patch avoids it.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:13 +10:00
David Gibson
2765ca2540 [PATCH] powerpc: Merge parport.h
Save for the header #define, ppc32 and ppc64 versions of parport.h are
identical.  This patch merges them.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:50:54 +10:00
David Gibson
25c8a78b1e [PATCH] powerpc: Fix handling of fpscr on 64-bit
The recent merge of fpu.S broken the handling of fpscr for
ARCH=powerpc and CONFIG_PPC64=y.  FP registers could be corrupted,
leading to strange random application crashes.

The confusion arises, because the thread_struct has (and requires) a
64-bit area to save the fpscr, because we use load/store double
instructions to get it in to/out of the FPU.  However, only the low
32-bits are actually used, so we want to treat it as a 32-bit quantity
when manipulating its bits to avoid extra load/stores on 32-bit.  This
patch replaces the current definition with a structure of two 32-bit
quantities (pad and val), to clarify things as much as is possible.
The 'val' field is used when manipulating bits, the structure itself
is used when obtaining the address for loading/unloading the value
from the FPU.

While we're at it, consolidate the 4 (!) almost identical versions of
cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S,
arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S,
arch/powerpc/kernel/misc_64.S) into a single version in fpu.S.  The
new version takes a pointer to thread_struct and applies the correct
offset itself, rather than a pointer to the fpscr field itself, again
to avoid confusion as to which is the correct field to use.

Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S
code, which it previously did not.

Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc
and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y).
Booted on G5 (ARCH=powerpc) and things which previously fell over no
longer do.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:48:50 +10:00
Stephen Rothwell
89edce0b4e [PATCH] powerpc: merge scatterlist.h
This depends on the 64bit dma_addr_t patch.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:52 +10:00
Stephen Rothwell
8168f902fa [PATCH] ppc64: make dma_addr_t 64 bits
There has been a need expressed for dma_addr_t to be 64 bits on PPC64.
This patch does that.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:50 +10:00
Paul Mackerras
bf20a00003 powerpc: undeprecate the old OF device tree accessors for now
The recent addition of __deprecated to the declarations for
find_devices etc. produces a whole pile of warnings from the
ppc32 code.  Since those functions still work perfectly well on
ppc32, which doesn't have hotplug support for anything in the
OF device tree, and we don't have time to fix that code now,
remove the __deprecated markings for now.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 16:45:29 +10:00
Paul Mackerras
b41fc4f82f power: Update the multiple inclusion protection symbol on machdep.h
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:53:19 +10:00
Paul Mackerras
6d0124fc06 powerpc: Fix interrupt-tree parsing
The interrupt-tree parsing code wasn't offsetting interrupt numbers
by 16 on 32-bit platforms with an i8259 interrupt controller, and
it was confused about the encoding of interrupt sense and level
(which is different for i8259 and openpic interrupt controllers,
just to make things interesting).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:19:06 +10:00
Paul Mackerras
830825d6c3 powerpc: Pull out MPC106 (grackle) initialization code into its own file
This is so that the 32-bit CHRP code can use it.  The MPC106
initialization code is now in arch/powerpc/sysdev/grackle.c and
is controlled by CONFIG_PPC_MPC106.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:16:38 +10:00
Paul Mackerras
f9bd170a87 powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:47:42 +10:00
Michael Ellerman
21f35f2822 [PATCH] powerpc: Move firmware.h into include/asm-powerpc
Move firmware.h into include/asm-powerpc.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:26 +10:00
Michael Ellerman
8c71632f7a [PATCH] powerpc: Remove trailing \n" in HMT macros
GCC 3.3.3 barfs on the trailing \n" in the HMT macros.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:19 +10:00
Michael Ellerman
a6f3546ecd [PATCH] powerpc: Remove duplicate definition of set_tb()
Somewhere along the line we got two definitions of set_tb(). They look to
be identical although they're not textually identical. So remove the #ifdef
CONFIG_PPC64 version, leaving the common version in time.h.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:00:09 +10:00
Becky Bruce
bfbac49736 [PATCH] powerpc: Fix types.h
Powerpc: Fix types.h

I noticed that Paul had already pulled the version of types.h that
is missing the config.h include into the merge tree - this patch adds
it back in.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:54:42 +10:00
Kumar Gala
d95bbcb3a3 [PATCH] powerpc: merge include/asm-ppc*/checksum.h into include/asm-powerpc/checksum.h
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:54:31 +10:00
Kumar Gala
60dda2565b [PATCH] powerpc: some prom.c cleanups
On !CONFIG_PPC_MULTIPLATFORM _machine is defined as 0.  This is ok, but
we can't assign a value to _machine then.

We may not have CONFIG_PCI available, so only build in support for
find_parent_pci_resource(), request_OF_resource(), release_OF_resource()
if PCI is enabled.  This is probably not the long term fix but works out
for now.

Make reg_property64 contain 64-bit elements on a 32-bit machine.

Mark the deprecated prom.c functions as __deprecated.

Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 15:52:56 +10:00
Stephen Rothwell
340601043d powerpc: Add a shutdown member to vio_driver
Add a shutdown member to struct vio_driver. We also need vio_bus_shutdown()
which converts from struct device to struct vio_dev and knows how to extract
the struct vio_driver.

Original patch adjusted for different location of vio.c.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 17:40:23 +10:00
Stephen Rothwell
6fdf5392ca powerpc: don't duplicate name between vio_driver and device_driver
Just set the name field directly in the device_driver structure
contained in the vio_driver struct.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 15:42:12 +10:00
Stephen Rothwell
f38d87f566 powerpc: Move include/asm-ppc64/vio.h to include/asm-powerpc/vio.h
Move include/asm-ppc64/vio.h to include/asm-powerpc/vio.h, that's it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24 15:41:58 +10:00
Paul Mackerras
96c4450760 powerpc: Fix time code for 601 processors
The 601 doesn't have the timebase register; instead it has an RTCL
register that counts nanoseconds and wraps at 1000000000, and an
RTCU register that counts seconds.  This makes the necessary changes
for the merged time code to use the RTCL/U registers when the kernel
is running on a 601.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-23 17:14:56 +10:00
Paul Mackerras
985990137e Merge changes from linux-2.6 by hand 2005-10-22 16:51:34 +10:00
Paul Mackerras
35499c0195 powerpc: Merge in 64-bit powermac support.
This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to
arch/powerpc/platforms/powermac/*.c and makes various minor tweaks
elsewhere.  On the powermac we now initialize ppc_md by copying
the whole pmac_md structure into it, which required some changes in
the ordering of initializations of individual fields of it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 16:02:39 +10:00
Paul Mackerras
b6ba92819d powerpc: Make set_rtc_time() return error code from lower-level function
Previously it ignored the return value from ppc_md.set_rtc_time,
but in fact the functions that that can point to do return a
useful error code, so return it from set_rtc_time().

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 15:57:55 +10:00
Paul Mackerras
a5b518ed31 ppc64/powerpc: Fix time initialization on SMP systems
This moves smp_space_timers from arch/ppc64/kernel/smp.c to
arch/powerpc/kernel/time.c and makes it initialize last_jiffy[]
instead of paca[].next_jiffy_update_tb, since last_jiffy[] is
now what the time code uses.  It also declares smp_space_timers
in include/asm-powerpc/time.h and gets rid of an ifdef in
div128_by_32.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 14:55:23 +10:00
David Gibson
6cb7bfebb1 [PATCH] powerpc: Merge thread_info.h
Merge ppc32 and ppc64 versions of thread_info.h.  They were pretty
similar already, the chief changes are:

	- Instead of inline asm to implement current_thread_info(),
which needs to be different for ppc32 and ppc64, we use C with an
asm("r1") register variable.  gcc turns it into the same asm as we
used to have for both platforms.
	- We replace ppc32's 'local_flags' with the ppc64
'syscall_noerror' field.  The noerror flag was in fact the only thing
in the local_flags field anyway, so the ppc64 approach is simpler, and
means we only need a load-immediate/store instead of load/mask/store
when clearing the flag.
	- In readiness for 64k pages, when THREAD_SIZE will be less
than a page, ppc64 used kmalloc() rather than get_free_pages() to
allocate the kernel stack.  With this patch we do the same for ppc32,
since there's no strong reason not to.
	- For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE
via asm-offsets, thread_info.h can now be safely included in asm, as
on ppc32.

Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and
Power5 (ARCH=ppc64 and ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21 22:47:23 +10:00
Paul Mackerras
5d14a18d59 powerpc: Fix some bugs in the new merged time code
I had the sense of the test for when to use the old 601-style RTC
registers inverted.  pmac_calibrate_decr and via_calibrate_decr
weren't setting ppc_tb_freq, on which all the further calculations
depended.  Lastly, update_gtod was losing the top 32 bits of
the new tb_to_xs value.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 22:33:06 +10:00
Paul Mackerras
17a6392d30 powerpc/ppc/ppc64: Various compile fixes.
This declares powersave_nap in system.h and makes it an int everywhere,
fixes typos for the maple platform, fixes a couple of places where
I missed removing the last two arguments from a message_pass function,
and makes ppc64 consistent with ppc32 in the type of the
pci_bridge.cfg_data field.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 21:10:09 +10:00
Paul Mackerras
ff065ddd96 powerpc: Merge various powermac-related header files.
Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all
of these moved from asm-ppc to asm-powerpc.  In each case the
asm-ppc64 version (if there was one) was just a single line
including the asm-ppc version.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 20:53:39 +10:00
Paul Mackerras
a9c5926469 powerpc: Move smp_mpic_message_pass into mpic.c
Having it here rather than in arch/ppc64/kernel/smp.c means that
we can use it on 32-bit SMP systems easily with ARCH=powerpc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 17:09:51 +10:00
Paul Mackerras
d8699e65c6 ppc64: Change ppc_md.get_cpuinfo to ppc_md.show_cpuinfo
... for consistency with ppc32; also add in ppc32's show_percpuinfo
function.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 17:02:01 +10:00
Becky Bruce
971dc77b64 [PATCH] powerpc: Merge types.h
This patch merges types.h into include/asm-powerpc. The only real change is
the removal of the include of linux/config.h from the 32-bit version - it
doesn't appear to be necessary.

This patch has been built on several different 32 and 64-bit platforms,
and booted on mpc8540_ads.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:50 +10:00
David Gibson
f7f6f4fea6 [PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]
This patches the ppc32 and ppc64 versions of the headers and .c files
with helper functions for manipulating the performance counting
hardware.  As a side effect, it removes use of the term "perfmon" from
ppc32, thus avoiding confusion with the unrelated performance counter
interface from HP Labs also called "perfmon".

Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac
with both ARCH=powerpc and ARCH=ppc{,64} as appropriate.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 16:22:24 +10:00
Paul Mackerras
f2783c1500 powerpc: Merge time.c and asm/time.h.
We now use the merged time.c for both 32-bit and 64-bit compilation
with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32.
This removes setup_default_decr (folds its function into time_init)
and moves wakeup_decrementer into time.c.  This also makes an
asm-powerpc/rtc.h.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:23:26 +10:00
Paul Mackerras
143a1dec7e powerpc: Merge machdep.h
A few things change for consistency between ppc32 and ppc64:
idle functions return void; *_get_boot_time functions return
unsigned long (i.e. time_t) rather than filling in a struct rtc_time
(since that's useful to the callers and easier for pmac to
generate); *_get_rtc_time and *_set_rtc_time functions take
a struct rtc_time; irq_canonicalize is gone; nvram_sync returns
void.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 23:11:21 +10:00
Stephen Rothwell
cf76485562 powerpc: fix 32bit LOADADDR macro
I forgot a semicolon.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:46:53 +10:00
Stephen Rothwell
426c1a11a6 powerpc: move iSeries/iSeries_pci.h to platforms/iseries
The only real user of this file outside platforms/iseries was
drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR()
so we move that to abs_addr.h (and lowercase it).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 14:51:42 +10:00