Commit Graph

44 Commits

Author SHA1 Message Date
Ben Hutchings
1daf417029 sfc: Merge efx_mcdi_mac_check_fault() and efx_mcdi_get_mac_faults()
The latter is only called by the former, which is a very short
wrapper.  Further, gcc 4.5 may currently wrongly warn that the
'faults' variable may be used uninitialised.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:47 +00:00
Ben Hutchings
710b208dc2 sfc: Merge efx_mac_operations into efx_nic_type
No NICs need to switch efx_mac_operations at run-time, and the MAC
operations are fairly closely bound to NIC types.

Move efx_mac_operations::reconfigure to efx_nic_type::reconfigure_mac
and efx_mac_operations::check_fault fo efx_nic_type::check_mac_fault.
Change callers to call through efx->type or directly if the NIC type
is known.

Remove efx_mac_operations::update_stats.  The implementations for
Falcon used to fetch MAC statistics synchronously and this was used by
efx_register_netdev() to clear statistics after running self-tests.
However, it now only converts statistics that have already been
fetched (and that only for Falcon), and the call from
efx_register_netdev() has no effect.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:46 +00:00
Ben Hutchings
1cb345220f sfc: Hold efx_nic::stats_lock while reading efx_nic::mac_stats
efx_nic::stats_lock is used to serialise stats updates, but each
reader was dropping it before it finished reading efx_nic::mac_stats.

If there were concurrent stats reads using procfs, or one using procfs
and one using ethtool, an update could race with a read.  On a 32-bit
system, the reader could see word-tearing of 64-bit stats (32 bits of
the old value and 32 bits of the new).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:45 +00:00
Ben Hutchings
788ec41cc8 sfc: Use new names for MC shared memory layout constants
These are defined alongside the firmware protocol in mcdi_pcol.h.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:44 +00:00
Ben Hutchings
3f713bf4dd sfc: Make handling of MC reboot more reliable
When the MC reboots, either as part of a firmware upgrade or due to a
bug, it attempts to complete (with an error) any requests that were
outstanding before the reboot.  Since there is an inherent race
condition in checking this, it will also write to a status word in
shared memory.

If we look at each of these separately, we may detect each reboot
twice, resulting in a spurious command failure after a firmware
upgrade or frustrating recovery from a firmware bug.  Instead, if a
request completion indicates a reboot, we must poll and clear the
status word.

This bug was previously masked by use of an incorrect address for the
status word.  Fix that, using the definition now included in
mcdi_pcol.h.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:10:44 +00:00
Ben Hutchings
e332bcb3d1 sfc: Remove fallback for invalid permanent MAC address
By the time we look at the MAC address in efx_probe_port(), either the
driver or the firmware has already validated the board configuration.
The possibility of having an invalid MAC address just isn't worth
considering.  It certainly isn't worth having a compile-time option
for this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27 00:07:38 +00:00
Ben Hutchings
cdb08f8fd8 sfc: Set default parallelism to per-core by default
The previous default of per-package can be more CPU-efficient, but
users generally seem to prefer per-core.  It should also allow
accelerated RFS to direct packets more precisely, if IRQ affinity
is properly spread out.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-09 17:08:18 +00:00
Ben Hutchings
fa142b9da3 sfc: Rename efx_wanted_channels() to efx_wanted_parallelism()
This function returns the degree of parallelism wanted, which is not
necessarily the total number of channels we want to create.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-09 17:08:17 +00:00
Ben Hutchings
05a9320f7e sfc: Update MCDI (firmware interface) definitions
Some commands and constants have been renamed; adjust the code
accordingly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-09 17:08:16 +00:00
Ben Hutchings
783b6bb66d sfc: Remove unnecessary inclusion of <asm/io.h>, prompted by checkpatch
Fix the warning:

WARNING: Use #include <linux/io.h> instead of <asm/io.h>

There is no need for selftest.c to include the file at all.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-09 17:08:15 +00:00
Ben Hutchings
18e83e4cd1 sfc: Const-qualify static data as appropriate, partly prompted by checkpatch
Fix the following warnings:

WARNING: struct dev_pm_ops should normally be const
WARNING: static const char * array should probably be static const char * const

Similarly const-qualify struct i2c_board_info, struct i2c_algo_bit_data,
struct efx_ethtool_stat, struct efx_mtd_ops and struct siena_nvram_type_info.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-09 17:08:13 +00:00
Ben Hutchings
0beaca2ca0 sfc: Remove parentheses around return expressions, reported by checkpatch
Fix the following error:

ERROR: return is not a function, parentheses are not required

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-05 18:54:04 +00:00
Ben Hutchings
e9e01846c7 sfc: Avoid assignment in an if-statement, reported by checkpatch
Fix the following error:

ERROR: do not use assignment in if condition

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-05 18:51:32 +00:00
Ben Hutchings
9c636baf85 sfc: Fix some formatting errors reported by checkpatch
Fix the following errors and warnings:

ERROR: trailing whitespace
ERROR: spaces required around that '=' (ctx:VxV)
WARNING: please, no space before tabs

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-05 18:44:49 +00:00
Ben Hutchings
8db182f4a8 sfc: Remove now-unused filter function
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:10:23 -05:00
Ben Hutchings
b2bb7b776a sfc: Implement ethtool RX NFC rules API instead of n-tuple API
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:10:18 -05:00
Ben Hutchings
1a6281ac5c sfc: Add support for retrieving and removing filters by ID
These new functions will support an implementation of the ethtool
RX NFC rules API.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:10:00 -05:00
Ben Hutchings
3532650f7c sfc: Use consistent types for filter IDs, indices and search depths
Filter IDs are u32 (but never very large) so an ID/error return
value should have type s32.

Filter indices and search depths are never negative, so should
have type unsigned int.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:09:11 -05:00
Ben Hutchings
b1f9284b4e sfc: Change filter ID generation to satisfy priority semantics of RX NFC
Also add note that the efx_filter_spec::priority field has nothing
to do with priority between multiple matching filters.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 14:09:11 -05:00
Rusty Russell
3db1cd5c05 net: fix assignment of 0/1 to bool variables.
DaveM said:
   Please, this kind of stuff rots forever and not using bool properly
   drives me crazy.

Joe Perches <joe@perches.com> gave me the spatch script:

	@@
	bool b;
	@@
	-b = 0
	+b = false
	@@
	bool b;
	@@
	-b = 1
	+b = true

I merely installed coccinelle, read the documentation and took credit.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19 22:27:29 -05:00
David S. Miller
4721d22160 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next 2011-12-16 15:23:22 -05:00
Ben Hutchings
70350b0685 sfc: Use skb_fill_page_desc() to simplify passing of page buffers to GRO
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-12-16 19:45:01 +00:00
Ben Hutchings
278bc4296b ethtool: Define and apply a default policy for RX flow hash indirection
All drivers that support modification of the RX flow hash indirection
table initialise it in the same way: RX rings are assigned to table
entries in rotation.  Make that default policy explicit by having them
call a ethtool_rxfh_indir_default() function.

In the ethtool core, add support for a zero size value for
ETHTOOL_SRXFHINDIR, which resets the table to this default.

Partly-suggested-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16 13:53:18 -05:00
Ben Hutchings
7850f63f16 ethtool: Centralise validation of ETHTOOL_{G, S}RXFHINDIR parameters
Add a new ethtool operation (get_rxfh_indir_size) to get the
indirectional table size.  Use this to validate the user buffer size
before calling get_rxfh_indir or set_rxfh_indir.  Use get_rxnfc to get
the number of RX rings, and validate the contents of the new
indirection table before calling set_rxfh_indir.  Remove this
validation from drivers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16 13:52:47 -05:00
Ben Hutchings
547c474fa7 sfc: Remove device ID macros only used once
The SFC9020/SFL9021 device IDs are only used in the device ID table,
where we can just as well use comments.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-12-06 22:07:54 +00:00
Thomas Meyer
c2e4e25afc sfc: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-04 01:32:06 -05:00
Eric Dumazet
449fa023bc sfc: fix race in efx_enqueue_skb_tso()
As soon as skb is pushed to hardware, it can be completed and freed, so
we should not dereference skb anymore.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30 17:12:27 -05:00
Tom Herbert
c3940999b2 sfc: Support for byte queue limits
Changes to sfc to use byte queue limits.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29 12:46:20 -05:00
Michał Mirosław
c8f44affb7 net: introduce and use netdev_features_t for device features sets
v2:	add couple missing conversions in drivers
	split unexporting netdev_fix_features()
	implemented %pNF
	convert sock::sk_route_(no?)caps

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:43:10 -05:00
Paul Gortmaker
6eb07caf1a drivers/net: Add moduleparam.h to drivers as required.
These files were using moduleparam infrastructure, but were not
including anything for it -- which is fine when module.h is being
implicitly included in all files, but that is going away.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:09 -04:00
Linus Torvalds
0e59e7e7fe Merge branch 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
* 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
  PCI: Clean-up MPS debug output
  pci: Clamp pcie_set_readrq() when using "performance" settings
  PCI: enable MPS "performance" setting to properly handle bridge MPS
  PCI: Workaround for Intel MPS errata
  PCI: Add support for PASID capability
  PCI: Add implementation for PRI capability
  PCI: Export ATS functions to modules
  PCI: Move ATS implementation into own file
  PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake()
  PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
  PCI / PM: Extend PME polling to all PCI devices
  PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
  PCI: Make pci_setup_bridge() non-static for use by arch code
  x86: constify PCI raw ops structures
  PCI: Add quirk for known incorrect MPSS
  PCI: Add Solarflare vendor ID and SFC4000 device IDs
2011-10-28 14:20:44 -07:00
Eric Dumazet
9e903e0852 net: add skb frag size accessors
To ease skb->truesize sanitization, its better to be able to localize
all references to skb frags size.

Define accessors : skb_frag_size() to fetch frag size, and
skb_frag_size_{set|add|sub}() to manipulate it.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 03:10:46 -04:00
Rick Jones
8b0c11679f net: Remove unnecessary driver assignments of ethtool_ringparam fields to zero
Per comments from Ben Hutchings on a previous patch, sweep the floors
a little removing unnecessary assignments of zero to fields of struct
ethtool_ringparam in driver code supporting ethtool -g.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-07 19:13:28 -04:00
Ian Campbell
5d6bcdfe38 net: use DMA_x_DEVICE and dma_mapping_error with skb_frag_dma_map
When I converted some drivers from pci_map_page to skb_frag_dma_map I
neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and
pci_dma_mapping_error into dma_mapping_error.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06 16:17:20 -04:00
Ian Campbell
4a22c4c919 sfc: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steve Hodgson <shodgson@solarflare.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:15 -04:00
David S. Miller
8decf86879 Merge branch 'master' of github.com:davem330/net
Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
2011-09-22 03:23:13 -04:00
Ben Hutchings
815c7db5c8 ethtool: Clean up definitions of rule location arrays in RX NFC
Correct the description of ethtool_rxnfc::rule_locs; it is an array
of currently used locations, not all possible valid locations.

Add note that drivers must not use ethtool_rxnfc::rule_locs.

The rule_locs argument to ethtool_ops::get_rxnfc is either NULL or a
pointer to an array of u32, so change the parameter type accordingly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 19:25:10 -04:00
Ben Hutchings
13225977f5 sfc: Use correct fields of struct ethtool_coalesce
An earlier developer misunderstood the meaning of the 'irq' fields and
the driver did not support the standard fields.  To avoid invalidating
existing user documentation, we report and accept changes through
either the standard or 'irq' fields.  If both are changed at the same
time, we prefer the standard field.

Also explain why we don't currently use the 'max_frames' fields.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 16:50:36 -04:00
Ben Hutchings
9e393b3060 sfc: Validate IRQ moderation parameters in efx_init_irq_moderation()
Add a range check, and move the check that RX and TX are consistent
from efx_ethtool_set_coalesce().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 16:50:36 -04:00
Ben Hutchings
a0c4faf548 sfc: Correct reporting and validation of TX interrupt coalescing
The reported TX IRQ moderation is generated in a completely crazy way.
Make it simple and correct.

When channels are shared between RX and TX, TX IRQ moderation must be
the same as RX IRQ moderation, but must be specified as 0!  Allow it
to be either specified as the same, or left at its previous value
in which case it will be quietly overridden.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 16:50:36 -04:00
Ben Hutchings
b548f97684 sfc: Use consistent types for interrupt coalescing parameters
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 16:50:36 -04:00
Ben Hutchings
9f85ee9c49 sfc: Correct error code for unsupported interrupt coalescing parameters
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16 16:50:36 -04:00
Jiri Pirko
afc4b13df1 net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:22:03 -07:00
Jeff Kirsher
874aeea5d0 sfc: Move the Solarflare drivers
Moves the Solarflare drivers into drivers/net/ethernet/sfc/ and
make the necessary Kconfig and Makefile changes.

CC: Steve Hodgson <shodgson@solarflare.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11 02:33:50 -07:00