Pull crypto updates from Herbert Xu:
"API:
- Add 1472-byte test to tcrypt for IPsec
- Reintroduced crypto stats interface with numerous changes
- Support incremental algorithm dumps
Algorithms:
- Add xchacha12/20
- Add nhpoly1305
- Add adiantum
- Add streebog hash
- Mark cts(cbc(aes)) as FIPS allowed
Drivers:
- Improve performance of arm64/chacha20
- Improve performance of x86/chacha20
- Add NEON-accelerated nhpoly1305
- Add SSE2 accelerated nhpoly1305
- Add AVX2 accelerated nhpoly1305
- Add support for 192/256-bit keys in gcmaes AVX
- Add SG support in gcmaes AVX
- ESN for inline IPsec tx in chcr
- Add support for CryptoCell 703 in ccree
- Add support for CryptoCell 713 in ccree
- Add SM4 support in ccree
- Add SM3 support in ccree
- Add support for chacha20 in caam/qi2
- Add support for chacha20 + poly1305 in caam/jr
- Add support for chacha20 + poly1305 in caam/qi2
- Add AEAD cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
crypto: skcipher - remove remnants of internal IV generators
crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
crypto: salsa20-generic - don't unnecessarily use atomic walk
crypto: skcipher - add might_sleep() to skcipher_walk_virt()
crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
crypto: cavium/nitrox - Added AEAD cipher support
crypto: mxc-scc - fix build warnings on ARM64
crypto: api - document missing stats member
crypto: user - remove unused dump functions
crypto: chelsio - Fix wrong error counter increments
crypto: chelsio - Reset counters on cxgb4 Detach
crypto: chelsio - Handle PCI shutdown event
crypto: chelsio - cleanup:send addr as value in function argument
crypto: chelsio - Use same value for both channel in single WR
crypto: chelsio - Swap location of AAD and IV sent in WR
crypto: chelsio - remove set but not used variable 'kctx_len'
crypto: ux500 - Use proper enum in hash_set_dma_transfer
crypto: ux500 - Use proper enum in cryp_set_dma_transfer
crypto: aesni - Add scatter/gather avx stubs, and use them in C
crypto: aesni - Introduce partial block macro
..
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
Pull general security subsystem updates from James Morris:
"The main changes here are Paul Gortmaker's removal of unneccesary
module.h infrastructure"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: integrity: partial revert of make ima_main explicitly non-modular
security: fs: make inode explicitly non-modular
security: audit and remove any unnecessary uses of module.h
security: integrity: make evm_main explicitly non-modular
keys: remove needless modular infrastructure from ecryptfs_format
security: integrity: make ima_main explicitly non-modular
tomoyo: fix small typo
-----BEGIN PGP SIGNATURE-----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=uWQk
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux patches from Paul Moore:
"I already used my best holiday pull request lines in the audit pull
request, so this one is going to be a bit more boring, sorry about
that. To make up for this, we do have a birthday of sorts to
celebrate: SELinux turns 18 years old this December. Perhaps not the
most exciting thing in the world for most people, but I think it's
safe to say that anyone reading this email doesn't exactly fall into
the "most people" category.
Back to business and the pull request itself:
Ondrej has five patches in this pull request and I lump them into
three categories: one patch to always allow submounts (using similar
logic to elsewhere in the kernel), one to fix some issues with the
SELinux policydb, and the others to cleanup and improve the SELinux
sidtab.
The other patches from Alexey and Petr and trivial fixes that are
adequately described in their respective subject lines.
With this last pull request of the year, I want to thank everyone who
has contributed patches, testing, and reviews to the SELinux project
this year, and the past 18 years. Like any good open source effort,
SELinux is only as good as the community which supports it, and I'm
very happy that we have the community we do - thank you all!"
* tag 'selinux-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: overhaul sidtab to fix bug and improve performance
selinux: use separate table for initial SID lookup
selinux: make "selinux_policycap_names[]" const char *
selinux: always allow mounting submounts
selinux: refactor sidtab conversion
Documentation: Update SELinux reference policy URL
selinux: policydb - fix byte order and alignment issues
-----BEGIN PGP SIGNATURE-----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=PCHx
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"In the finest of holiday of traditions, I have a number of gifts to
share today. While most of them are re-gifts from others, unlike the
typical re-gift, these are things you will want in and around your
tree; I promise.
This pull request is perhaps a bit larger than our typical PR, but
most of it comes from Jan's rework of audit's fanotify code; a very
welcome improvement. We ran this through our normal regression tests,
as well as some newly created stress tests and everything looks good.
Richard added a few patches, mostly cleaning up a few things and and
shortening some of the audit records that we send to userspace; a
change the userspace folks are quite happy about.
Finally YueHaibing and I kick in a few patches to simplify things a
bit and make the code less prone to errors.
Lastly, I want to say thanks one more time to everyone who has
contributed patches, testing, and code reviews for the audit subsystem
over the past year. The project is what it is due to your help and
contributions - thank you"
* tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (22 commits)
audit: remove duplicated include from audit.c
audit: shorten PATH cap values when zero
audit: use current whenever possible
audit: minimize our use of audit_log_format()
audit: remove WATCH and TREE config options
audit: use session_info helper
audit: localize audit_log_session_info prototype
audit: Use 'mark' name for fsnotify_mark variables
audit: Replace chunk attached to mark instead of replacing mark
audit: Simplify locking around untag_chunk()
audit: Drop all unused chunk nodes during deletion
audit: Guarantee forward progress of chunk untagging
audit: Allocate fsnotify mark independently of chunk
audit: Provide helper for dropping mark's chunk reference
audit: Remove pointless check in insert_hash()
audit: Factor out chunk replacement code
audit: Make hash table insertion safe against concurrent lookups
audit: Embed key into chunk
audit: Fix possible tagging failures
audit: Fix possible spurious -ENOSPC error
...
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 4f83d5ea64 ("security: integrity: make ima_main explicitly
non-modular") I'd removed <linux/module.h> after assuming that the
function is_module_sig_enforced() was an LSM function and not a core
kernel module function.
Unfortunately the typical .config selections used in build testing
provide an implicit <linux/module.h> presence, and so normal/typical
build testing did not immediately reveal my incorrect assumption.
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type
same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start the policy_tokens and the associated enumeration from zero,
simplifying the pt macro.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code uses a bitmap to check for duplicate tokens during parsing, and
that doesn't work at all for the negative Opt_err token case.
There is absolutely no reason to make Opt_err be negative, and in fact
it only confuses things, since some of the affected functions actually
return a positive Opt_xyz enum _or_ a regular negative error code (eg
-EINVAL), and using -1 for Opt_err makes no sense.
There are similar problems in ima_policy.c and key encryption, but they
don't have the immediate bug wrt bitmap handing, and ima_policy.c in
particular needs a different patch to make the enum values match the
token array index. Mimi is sending that separately.
Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 5208cc8342 ("keys, trusted: fix: *do not* allow duplicate key options")
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Makefile/Kconfig entry controlling compilation of this code is:
security/Makefile:obj-$(CONFIG_SECURITYFS) += inode.o
security/Kconfig:config SECURITYFS
security/Kconfig: bool "Enable the securityfs filesystem"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
The removal of module.h uncovered a couple previously hidden implicit
header requirements which are now included explicitly.
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-security-module@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The Makefile/Kconfig entry controlling compilation of this code is:
obj-$(CONFIG_EVM) += evm.o
evm-y := evm_main.o evm_crypto.o evm_secfs.o
security/integrity/evm/Kconfig:config EVM
security/integrity/evm/Kconfig: bool "EVM support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Even though the support can be modular, only one file needs to use
all the macros like MODULE_AUTHOR, MODULE_LICENSE etc. Only the one
responsible for registering/removal with module_init/module_exit
needs to declare these. In this case, that file is "encrypted.c"
and it already has the MODULE_LICENSE that we are removing here.
Since the file does EXPORT_SYMBOL, we add export.h - and build tests
show that module.h (which includes everything) was hiding an implicit
use of string.h - so that is added as well.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The Makefile/Kconfig entry controlling compilation of this code is:
obj-$(CONFIG_IMA) += ima.o
ima-y := ima_fs.o ima_queue.o ima_init.o ima_main.o ima_crypto.o ima_api.o \
ima_policy.o ima_template.o ima_template_lib.o
security/integrity/ima/Kconfig:config IMA
security/integrity/ima/Kconfig- bool "Integrity Measurement Architecture(IMA)"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Before this patch, during a policy reload the sidtab would become frozen
and trying to map a new context to SID would be unable to add a new
entry to sidtab and fail with -ENOMEM.
Such failures are usually propagated into userspace, which has no way of
distignuishing them from actual allocation failures and thus doesn't
handle them gracefully. Such situation can be triggered e.g. by the
following reproducer:
while true; do load_policy; echo -n .; sleep 0.1; done &
for (( i = 0; i < 1024; i++ )); do
runcon -l s0:c$i echo -n x || break
# or:
# chcon -l s0:c$i <some_file> || break
done
This patch overhauls the sidtab so it doesn't need to be frozen during
policy reload, thus solving the above problem.
The new SID table leverages the fact that SIDs are allocated
sequentially and are never invalidated and stores them in linear buckets
indexed by a tree structure. This brings several advantages:
1. Fast SID -> context lookup - this lookup can now be done in
logarithmic time complexity (usually in less than 4 array lookups)
and can still be done safely without locking.
2. No need to re-search the whole table on reverse lookup miss - after
acquiring the spinlock only the newly added entries need to be
searched, which means that reverse lookups that end up inserting a
new entry are now about twice as fast.
3. No need to freeze sidtab during policy reload - it is now possible
to handle insertion of new entries even during sidtab conversion.
The tree structure of the new sidtab is able to grow automatically to up
to about 2^31 entries (at which point it should not have more than about
4 tree levels). The old sidtab had a theoretical capacity of almost 2^32
entries, but half of that is still more than enough since by that point
the reverse table lookups would become unusably slow anyway...
The number of entries per tree node is selected automatically so that
each node fits into a single page, which should be the easiest size for
kmalloc() to handle.
Note that the cache for reverse lookup is preserved with equivalent
logic. The only difference is that instead of storing pointers to the
hash table nodes it stores just the indices of the cached entries.
The new cache ensures that the indices are loaded/stored atomically, but
it still has the drawback that concurrent cache updates may mess up the
contents of the cache. Such situation however only reduces its
effectivity, not the correctness of lookups.
Tested by selinux-testsuite and thoroughly tortured by this simple
stress test:
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Link: https://github.com/SELinuxProject/selinux-kernel/issues/38
Reported-by: Orion Poplawski <orion@nwra.com>
Reported-by: Li Kun <hw.likun@huawei.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: most of sidtab.c merged by hand due to conflicts]
[PM: checkpatch fixes in mls.c, services.c, sidtab.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This moves handling of initial SIDs into a separate table. Note that the
SIDs stored in the main table are now shifted by SECINITSID_NUM and
converted to/from the actual SIDs transparently by helper functions.
This change doesn't make much sense on its own, but it simplifies
further sidtab overhaul in a succeeding patch.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fixed some checkpatch warnings on line length, whitespace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=SyQy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fix from Paul Moore:
"One more SELinux fix for v4.20: add some missing netlink message to
SELinux permission mappings. The netlink messages were added in v4.19,
but unfortunately we didn't catch it then because the mechanism to
catch these things was bypassed.
In addition to adding the mappings, we're adding some comments to the
code to hopefully prevent bypasses in the future"
* tag 'selinux-pr-20181129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN
Commit 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
added new RTM_* definitions without properly updating SELinux, this
patch adds the necessary SELinux support.
While there was a BUILD_BUG_ON() in the SELinux code to protect from
exactly this case, it was bypassed in the broken commit. In order to
hopefully prevent this from happening in the future, add additional
comments which provide some instructions on how to resolve the
BUILD_BUG_ON() failures.
Fixes: 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
Cc: <stable@vger.kernel.org> # 4.19
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are many places, notably audit_log_task_info() and
audit_log_exit(), that take task_struct pointers but in reality they
are always working on the current task. This patch eliminates the
task_struct arguments and uses current directly which allows a number
of cleanups as well.
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
If a superblock has the MS_SUBMOUNT flag set, we should always allow
mounting it. These mounts are done automatically by the kernel either as
part of mounting some parent mount (e.g. debugfs always mounts tracefs
under "tracing" for compatibility) or they are mounted automatically as
needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such
automounts are either an implicit consequence of the parent mount (which
is already checked) or they can happen during regular accesses (where it
doesn't make sense to check against the current task's context), the
mount permission check should be skipped for them.
Without this patch, attempts to access contents of an automounted
directory can cause unexpected SELinux denials.
In the current kernel tree, the MS_SUBMOUNT flag is set only via
vfs_submount(), which is called only from the following places:
- AFS, when automounting special "symlinks" referencing other cells
- CIFS, when automounting "referrals"
- NFS, when automounting subtrees
- debugfs, when automounting tracefs
In all cases the submounts are meant to be transparent to the user and
it makes sense that if mounting the master is allowed, then so should be
the automounts. Note that CAP_SYS_ADMIN capability checking is already
skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in:
- sget_userns() in fs/super.c:
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) &&
!(type->fs_flags & FS_USERNS_MOUNT) &&
!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
- sget() in fs/super.c:
/* Ensure the requestor has permissions over the target filesystem */
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
Verified internally on patched RHEL 7.6 with a reproducer using
NFS+httpd and selinux-tesuite.
Fixes: 93faccbbfa ("fs: Better permission checking for submounts")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is a purely cosmetic change that encapsulates the three-step sidtab
conversion logic (shutdown -> clone -> map) into a single function
defined in sidtab.c (as opposed to services.c).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespaces fixes to make checkpatch happy]
Signed-off-by: Paul Moore <paul@paul-moore.com>
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect. Many users therefore
already don't pass it, but some still do. This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.
Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=YdYs
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Two small SELinux fixes for v4.20.
Ondrej's patch adds a check on user input, and my patch ensures we
don't look past the end of a buffer.
Both patches are quite small and pass the selinux-testsuite"
* tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix non-MLS handling in mls_context_to_sid()
selinux: check length properly in SCTP bind hook
Commit 95ffe19420 ("selinux: refactor mls_context_to_sid() and make
it stricter") inadvertently changed how we handle labels that did not
contain MLS information. This patch restores the proper behavior in
mls_context_to_sid() and adds a comment explaining the proper
behavior to help ensure this doesn't happen again.
Fixes: 95ffe19420 ("selinux: refactor mls_context_to_sid() and make it stricter")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
On systems with IMA-appraisal enabled with a policy requiring file
signatures, the "good" signature values are stored on the filesystem as
extended attributes (security.ima). Signature verification failure
would normally be limited to just a particular file (eg. executable),
but during boot signature verification failure could result in a system
hang.
Defining and requiring a new public_key_signature field requires all
callers of asymmetric signature verification to be updated to reflect
the change. This patch updates the integrity asymmetric_verify()
caller.
Fixes: 82f94f2447 ("KEYS: Provide software public key query function [ver #2]")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.
The length of the whole address ('len') is already checked in the
callees.
Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930fd3 ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Do the LE conversions before doing the Infiniband-related range checks.
The incorrect checks are otherwise causing a failure to load any policy
with an ibendportcon rule on BE systems. This can be reproduced by
running (on e.g. ppc64):
cat >my_module.cil <<EOF
(type test_ibendport_t)
(roletype object_r test_ibendport_t)
(ibendportcon mlx4_0 1 (system_u object_r test_ibendport_t ((s0) (s0))))
EOF
semodule -i my_module.cil
Also, fix loading/storing the 64-bit subnet prefix for OCON_IBPKEY to
use a correctly aligned buffer.
Finally, do not use the 'nodebuf' (u32) buffer where 'buf' (__le32)
should be used instead.
Tested internally on a ppc64 machine with a RHEL 7 kernel with this
patch applied.
Cc: Daniel Jurgens <danielj@mellanox.com>
Cc: Eli Cohen <eli@mellanox.com>
Cc: James Morris <jmorris@namei.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: <stable@vger.kernel.org> # 4.13+
Fixes: a806f7a161 ("selinux: Create policydb version for Infiniband support")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- replace spin_is_locked() with lockdep
- add base support for secmark labeling and matching
+ Cleanups
- clean an indentation issue, remove extraneous space
- remove no-op permission check in policy_unpack
- fix checkpatch missing spaces error in Parse secmark policy
- fix network performance issue in aa_label_sk_perm
+ Bug fixes
- add #ifdef checks for secmark filtering
- fix an error code in __aa_create_ns()
- don't try to replace stale label in ptrace checks
- fix failure to audit context info in build_change_hat
- check buffer bounds when mapping permissions mask
- fully initialize aa_perms struct when answering userspace query
- fix uninitialized value in aa_split_fqname
-----BEGIN PGP SIGNATURE-----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=GzxZ
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2018-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features/Improvements:
- replace spin_is_locked() with lockdep
- add base support for secmark labeling and matching
Cleanups:
- clean an indentation issue, remove extraneous space
- remove no-op permission check in policy_unpack
- fix checkpatch missing spaces error in Parse secmark policy
- fix network performance issue in aa_label_sk_perm
Bug fixes:
- add #ifdef checks for secmark filtering
- fix an error code in __aa_create_ns()
- don't try to replace stale label in ptrace checks
- fix failure to audit context info in build_change_hat
- check buffer bounds when mapping permissions mask
- fully initialize aa_perms struct when answering userspace query
- fix uninitialized value in aa_split_fqname"
* tag 'apparmor-pr-2018-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: clean an indentation issue, remove extraneous space
apparmor: fix checkpatch error in Parse secmark policy
apparmor: add #ifdef checks for secmark filtering
apparmor: Fix uninitialized value in aa_split_fqname
apparmor: don't try to replace stale label in ptraceme check
apparmor: Replace spin_is_locked() with lockdep
apparmor: Allow filtering based on secmark policy
apparmor: Parse secmark policy
apparmor: Add a wildcard secid
apparmor: don't try to replace stale label in ptrace access check
apparmor: Fix network performance issue in aa_label_sk_perm
Trivial fix to clean up an indentation issue, remove space
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This patch exposes some common functionality needed to send TPM commands.
Several functions from keys/trusted.c are exposed for use by the new tpm
key subtype and a module dependency is introduced.
In the future, common functionality between the trusted key type and the
asym_tpm subtype should be factored out into a common utility library.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Provide five keyctl functions that permit userspace to make use of the new
key type ops for accessing and driving asymmetric keys.
(*) Query an asymmetric key.
long keyctl(KEYCTL_PKEY_QUERY,
key_serial_t key, unsigned long reserved,
struct keyctl_pkey_query *info);
Get information about an asymmetric key. The information is returned
in the keyctl_pkey_query struct:
__u32 supported_ops;
A bit mask of flags indicating which ops are supported. This is
constructed from a bitwise-OR of:
KEYCTL_SUPPORTS_{ENCRYPT,DECRYPT,SIGN,VERIFY}
__u32 key_size;
The size in bits of the key.
__u16 max_data_size;
__u16 max_sig_size;
__u16 max_enc_size;
__u16 max_dec_size;
The maximum sizes in bytes of a blob of data to be signed, a signature
blob, a blob to be encrypted and a blob to be decrypted.
reserved must be set to 0. This is intended for future use to hand
over one or more passphrases needed unlock a key.
If successful, 0 is returned. If the key is not an asymmetric key,
EOPNOTSUPP is returned.
(*) Encrypt, decrypt, sign or verify a blob using an asymmetric key.
long keyctl(KEYCTL_PKEY_ENCRYPT,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
void *out);
long keyctl(KEYCTL_PKEY_DECRYPT,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
void *out);
long keyctl(KEYCTL_PKEY_SIGN,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
void *out);
long keyctl(KEYCTL_PKEY_VERIFY,
const struct keyctl_pkey_params *params,
const char *info,
const void *in,
const void *in2);
Use an asymmetric key to perform a public-key cryptographic operation
a blob of data.
The parameter block pointed to by params contains a number of integer
values:
__s32 key_id;
__u32 in_len;
__u32 out_len;
__u32 in2_len;
For a given operation, the in and out buffers are used as follows:
Operation ID in,in_len out,out_len in2,in2_len
======================= =============== =============== ===========
KEYCTL_PKEY_ENCRYPT Raw data Encrypted data -
KEYCTL_PKEY_DECRYPT Encrypted data Raw data -
KEYCTL_PKEY_SIGN Raw data Signature -
KEYCTL_PKEY_VERIFY Raw data - Signature
info is a string of key=value pairs that supply supplementary
information.
The __spare space in the parameter block must be set to 0. This is
intended, amongst other things, to allow the passing of passphrases
required to unlock a key.
If successful, encrypt, decrypt and sign all return the amount of data
written into the output buffer. Verification returns 0 on success.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Pull LoadPin updates from James Morris:
"From Kees: This is a small reporting improvement and the param change
needed for the ordering series (but since the loadpin change is
desired and separable, I'm putting it here)"
* 'next-loadpin' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LoadPin: Rename boot param "enabled" to "enforce"
LoadPin: Report friendly block device name
Pull smack updates from James Morris:
"From Casey: three patches for Smack for 4.20. Two clean up warnings
and one is a rarely encountered ptrace capability check"
* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: Mark expected switch fall-through
Smack: ptrace capability use fixes
Smack: remove set but not used variable 'root_inode'
Pull integrity updates from James Morris:
"From Mimi: This contains a couple of bug fixes, including one for a
recent problem with calculating file hashes on overlayfs, and some
code cleanup"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
MAINTAINERS: add Jarkko as maintainer for trusted keys
ima: open a new file instance if no read permissions
ima: fix showing large 'violations' or 'runtime_measurements_count'
security/integrity: remove unnecessary 'init_keyring' variable
security/integrity: constify some read-only data
vfs: require i_size <= SIZE_MAX in kernel_read_file()
Pull security subsystem updates from James Morris:
"In this patchset, there are a couple of minor updates, as well as some
reworking of the LSM initialization code from Kees Cook (these prepare
the way for ordered stackable LSMs, but are a valuable cleanup on
their own)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Don't ignore initialization failures
LSM: Provide init debugging infrastructure
LSM: Record LSM name in struct lsm_info
LSM: Convert security_initcall() into DEFINE_LSM()
vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
LSM: Convert from initcall to struct lsm_info
LSM: Remove initcall tracing
LSM: Rename .security_initcall section to .lsm_info
vmlinux.lds.h: Avoid copy/paste of security_init section
LSM: Correctly announce start of LSM initialization
security: fix LSM description location
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
seccomp: remove unnecessary unlikely()
security: tomoyo: Fix obsolete function
security/capabilities: remove check for -EINVAL
-----BEGIN PGP SIGNATURE-----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=Q8ZM
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20181022' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Three SELinux patches for v4.20, all fall under the bug-fix or
behave-better category, which is good. All three have pretty good
descriptions too, which is even better"
* tag 'selinux-pr-20181022' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: Add __GFP_NOWARN to allocation at str_read()
selinux: refactor mls_context_to_sid() and make it stricter
selinux: fix mounting of cgroup2 under older policies
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
LoadPin's "enabled" setting is really about enforcement, not whether
or not the LSM is using LSM hooks. Instead, split this out so that LSM
enabling can be logically distinct from whether enforcement is happening
(for example, the pinning happens when the LSM is enabled, but the pin
is only checked when "enforce" is set). This allows LoadPin to continue
to operate sanely in test environments once LSM enable/disable is
centrally handled (i.e. we want LoadPin to be enabled separately from
its enforcement).
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Instead of only reporting major/minor, include the actual block device
name, at least as seen by the kernel.
Signed-off-by: Kees Cook <keescook@chromium.org>
The newly added code fails to build when either SECMARK or
NETFILTER are disabled:
security/apparmor/lsm.c: In function 'apparmor_socket_sock_rcv_skb':
security/apparmor/lsm.c:1138:12: error: 'struct sk_buff' has no member named 'secmark'; did you mean 'mark'?
security/apparmor/lsm.c:1671:21: error: 'struct nf_hook_state' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
Add a set of #ifdef checks around it to only enable the code that
we can compile and that makes sense in that configuration.
Fixes: ab9f211508 ("apparmor: Allow filtering based on secmark policy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
LSM initialization failures have traditionally been ignored. We should
at least WARN when something goes wrong.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Booting with "lsm.debug" will report future details on how LSM ordering
decisions are being made.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
