Andy reported that commit 6b41030fdc ("dmaengine: dmatest:
Restore default for channel") broke his scripts for the case
where "busy" channel is used for configuration with expectation
that run command would do nothing. Instead, behavior was
(unintentionally) changed to treat such case as under-configuration
and progress with defaults, i.e. run command would start a test
with default setting for channel (which would use all channels).
Restore original behavior with tracking status of channel setter
so we can distinguish between misconfigured and under-configured
cases in run command and act accordingly.
Fixes: 6b41030fdc ("dmaengine: dmatest: Restore default for channel")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200922115847.30100-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix a Kconfig warning that is causing lots of build errors
when USB_SUPPORT is not set.
USB_PHY depends on USB_SUPPORT but "select" doesn't care about
dependencies, so this driver should also depend on USB_SUPPORT.
It should not select USB_SUPPORT.
WARNING: unmet direct dependencies detected for USB_PHY
Depends on [n]: USB_SUPPORT [=n]
Selected by [m]:
- USB_LGM_PHY [=m]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Li Yin <yin1.li@intel.com>
Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This adds support for the NanoPi R2S from FriendlyARM.
Rockchip RK3328 SoC
1GB DDR4 RAM
Gigabit Ethernet (WAN)
Gigabit Ethernet (USB3) (LAN)
USB 2.0 Host Port
MicroSD slot
Reset button
WAN - LAN - SYS LED
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20200920154528.88185-2-mail@david-bauer.net
[adapted from sdmmc0m1_gpio to renamed sdmmc0m1_pin]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The following test case leads to NULL kobject free error:
mount seed /mnt
add sprout to /mnt
umount /mnt
mount sprout to /mnt
delete seed
kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350
RIP: 0010:kobject_put+0x80/0x350
::
Call Trace:
btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs]
btrfs_rm_device.cold+0xa8/0x298 [btrfs]
btrfs_ioctl+0x206c/0x22a0 [btrfs]
ksys_ioctl+0xe2/0x140
__x64_sys_ioctl+0x1e/0x29
do_syscall_64+0x96/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f4047c6288b
::
This is because, at the end of the seed device-delete, we try to remove
the seed's devid sysfs entry. But for the seed devices under the sprout
fs, we don't initialize the devid kobject yet. So add a kobject state
check, which takes care of the bug.
Fixes: 668e48af7a ("btrfs: sysfs, add devid/dev_state kobject and device attributes")
CC: stable@vger.kernel.org # 5.6+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that there's a library function that calculates the SHA-256 digest
of a buffer in one step, use it instead of sha256_init() +
sha256_update() + sha256_final().
Link: https://lore.kernel.org/r/20200917045341.324996-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt_set_test_dummy_encryption() requires that the optional argument
to the test_dummy_encryption mount option be specified as a substring_t.
That doesn't work well with filesystems that use the new mount API,
since the new way of parsing mount options doesn't use substring_t.
Make it take the argument as a 'const char *' instead.
Instead of moving the match_strdup() into the callers in ext4 and f2fs,
make them just use arg->from directly. Since the pattern is
"test_dummy_encryption=%s", the argument will be null-terminated.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The behavior of the test_dummy_encryption mount option is that when a
new file (or directory or symlink) is created in an unencrypted
directory, it's automatically encrypted using a dummy encryption policy.
That's it; in particular, the encryption (or lack thereof) of existing
files (or directories or symlinks) doesn't change.
Unfortunately the implementation of test_dummy_encryption is a bit weird
and confusing. When test_dummy_encryption is enabled and a file is
being created in an unencrypted directory, we set up an encryption key
(->i_crypt_info) for the directory. This isn't actually used to do any
encryption, however, since the directory is still unencrypted! Instead,
->i_crypt_info is only used for inheriting the encryption policy.
One consequence of this is that the filesystem ends up providing a
"dummy context" (policy + nonce) instead of a "dummy policy". In
commit ed318a6cc0 ("fscrypt: support test_dummy_encryption=v2"), I
mistakenly thought this was required. However, actually the nonce only
ends up being used to derive a key that is never used.
Another consequence of this implementation is that it allows for
'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge
case that can be forgotten about. For example, currently
FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the
dummy encryption policy when the filesystem is mounted with
test_dummy_encryption. That seems like the wrong thing to do, since
again, the directory itself is not actually encrypted.
Therefore, switch to a more logical and maintainable implementation
where the dummy encryption policy inheritance is done without setting up
keys for unencrypted directories. This involves:
- Adding a function fscrypt_policy_to_inherit() which returns the
encryption policy to inherit from a directory. This can be a real
policy, a dummy policy, or no policy.
- Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc.
with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc.
- Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead
of an inode.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
In preparation for moving the logic for "get the encryption policy
inherited by new files in this directory" to a single place, make
fscrypt_prepare_symlink() a regular function rather than an inline
function that wraps __fscrypt_prepare_symlink().
This way, the new function fscrypt_policy_to_inherit() won't need to be
exported to filesystems.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The fscrypt UAPI header defines fscrypt_policy to fscrypt_policy_v1,
for source compatibility with old userspace programs.
Internally, the kernel doesn't want that compatibility definition.
Instead, fscrypt_private.h #undefs it and re-defines it to a union.
That works for now. However, in order to add
fscrypt_operations::get_dummy_policy(), we'll need to forward declare
'union fscrypt_policy' in include/linux/fscrypt.h. That would cause
build errors because "fscrypt_policy" is used in ioctl numbers.
To avoid this, modify the UAPI header to make the fscrypt_policy
compatibility definition conditional on !__KERNEL__, and make the ioctls
use fscrypt_policy_v1 instead of fscrypt_policy.
Note that this doesn't change the actual ioctl numbers.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt_get_encryption_info() has never actually been safe to call in a
context that needs GFP_NOFS, since it calls crypto_alloc_skcipher().
crypto_alloc_skcipher() isn't GFP_NOFS-safe, even if called under
memalloc_nofs_save(). This is because it may load kernel modules, and
also because it internally takes crypto_alg_sem. Other tasks can do
GFP_KERNEL allocations while holding crypto_alg_sem for write.
The use of fscrypt_init_mutex isn't GFP_NOFS-safe either.
So, stop pretending that fscrypt_get_encryption_info() is nofs-safe.
I.e., when it allocates memory, just use GFP_KERNEL instead of GFP_NOFS.
Note, another reason to do this is that GFP_NOFS is deprecated in favor
of using memalloc_nofs_save() in the proper places.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that all filesystems have been converted to use
fscrypt_prepare_new_inode(), the encryption key for new symlink inodes
is now already set up whenever we try to encrypt the symlink target.
Enforce this rather than try to set up the key again when it may be too
late to do so safely.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that all filesystems have been converted to use
fscrypt_prepare_new_inode() and fscrypt_set_context(),
fscrypt_inherit_context() is no longer used. Remove it.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that a fscrypt_info may be set up for inodes that are currently
being created and haven't yet had an inode number assigned, avoid
logging confusing messages about "inode 0".
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Convert ubifs to use the new functions fscrypt_prepare_new_inode() and
fscrypt_set_context().
Unlike ext4 and f2fs, this doesn't appear to fix any deadlock bug. But
it does shorten the code slightly and get all filesystems using the same
helper functions, so that fscrypt_inherit_context() can be removed.
It also fixes an incorrect error code where ubifs returned EPERM instead
of the expected ENOKEY.
Link: https://lore.kernel.org/r/20200917041136.178600-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Convert f2fs to use the new functions fscrypt_prepare_new_inode() and
fscrypt_set_context(). This avoids calling
fscrypt_get_encryption_info() from under f2fs_lock_op(), which can
deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe.
For more details about this problem, see the earlier patch
"fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()".
This also fixes a f2fs-specific deadlock when the filesystem is mounted
with '-o test_dummy_encryption' and a file is created in an unencrypted
directory other than the root directory:
INFO: task touch:207 blocked for more than 30 seconds.
Not tainted 5.9.0-rc4-00099-g729e3d0919844 #2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:touch state:D stack: 0 pid: 207 ppid: 167 flags:0x00000000
Call Trace:
[...]
lock_page include/linux/pagemap.h:548 [inline]
pagecache_get_page+0x25e/0x310 mm/filemap.c:1682
find_or_create_page include/linux/pagemap.h:348 [inline]
grab_cache_page include/linux/pagemap.h:424 [inline]
f2fs_grab_cache_page fs/f2fs/f2fs.h:2395 [inline]
f2fs_grab_cache_page fs/f2fs/f2fs.h:2373 [inline]
__get_node_page.part.0+0x39/0x2d0 fs/f2fs/node.c:1350
__get_node_page fs/f2fs/node.c:35 [inline]
f2fs_get_node_page+0x2e/0x60 fs/f2fs/node.c:1399
read_inline_xattr+0x88/0x140 fs/f2fs/xattr.c:288
lookup_all_xattrs+0x1f9/0x2c0 fs/f2fs/xattr.c:344
f2fs_getxattr+0x9b/0x160 fs/f2fs/xattr.c:532
f2fs_get_context+0x1e/0x20 fs/f2fs/super.c:2460
fscrypt_get_encryption_info+0x9b/0x450 fs/crypto/keysetup.c:472
fscrypt_inherit_context+0x2f/0xb0 fs/crypto/policy.c:640
f2fs_init_inode_metadata+0xab/0x340 fs/f2fs/dir.c:540
f2fs_add_inline_entry+0x145/0x390 fs/f2fs/inline.c:621
f2fs_add_dentry+0x31/0x80 fs/f2fs/dir.c:757
f2fs_do_add_link+0xcd/0x130 fs/f2fs/dir.c:798
f2fs_add_link fs/f2fs/f2fs.h:3234 [inline]
f2fs_create+0x104/0x290 fs/f2fs/namei.c:344
lookup_open.isra.0+0x2de/0x500 fs/namei.c:3103
open_last_lookups+0xa9/0x340 fs/namei.c:3177
path_openat+0x8f/0x1b0 fs/namei.c:3365
do_filp_open+0x87/0x130 fs/namei.c:3395
do_sys_openat2+0x96/0x150 fs/open.c:1168
[...]
That happened because f2fs_add_inline_entry() locks the directory
inode's page in order to add the dentry, then f2fs_get_context() tries
to lock it recursively in order to read the encryption xattr. This
problem is specific to "test_dummy_encryption" because normally the
directory's fscrypt_info would be set up prior to
f2fs_add_inline_entry() in order to encrypt the new filename.
Regardless, the new design fixes this test_dummy_encryption deadlock as
well as potential deadlocks with fs reclaim, by setting up any needed
fscrypt_info structs prior to taking so many locks.
The test_dummy_encryption deadlock was reported by Daniel Rosenberg.
Reported-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Convert ext4 to use the new functions fscrypt_prepare_new_inode() and
fscrypt_set_context(). This avoids calling
fscrypt_get_encryption_info() from within a transaction, which can
deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe.
For more details about this problem, see the earlier patch
"fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()".
Link: https://lore.kernel.org/r/20200917041136.178600-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
To compute a new inode's xattr credits, we need to know whether the
inode will be encrypted or not. When we switch to use the new helper
function fscrypt_prepare_new_inode(), we won't find out whether the
inode will be encrypted until slightly later than is currently the case.
That will require moving the code block that computes the xattr credits.
To make this easier and reduce the length of __ext4_new_inode(), move
this code block into a new function ext4_xattr_credits_for_new_inode().
Link: https://lore.kernel.org/r/20200917041136.178600-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
fscrypt_get_encryption_info() is intended to be GFP_NOFS-safe. But
actually it isn't, since it uses functions like crypto_alloc_skcipher()
which aren't GFP_NOFS-safe, even when called under memalloc_nofs_save().
Therefore it can deadlock when called from a context that needs
GFP_NOFS, e.g. during an ext4 transaction or between f2fs_lock_op() and
f2fs_unlock_op(). This happens when creating a new encrypted file.
We can't fix this by just not setting up the key for new inodes right
away, since new symlinks need their key to encrypt the symlink target.
So we need to set up the new inode's key before starting the
transaction. But just calling fscrypt_get_encryption_info() earlier
doesn't work, since it assumes the encryption context is already set,
and the encryption context can't be set until the transaction.
The recently proposed fscrypt support for the ceph filesystem
(https://lkml.kernel.org/linux-fscrypt/20200821182813.52570-1-jlayton@kernel.org/T/#u)
will have this same ordering problem too, since ceph will need to
encrypt new symlinks before setting their encryption context.
Finally, f2fs can deadlock when the filesystem is mounted with
'-o test_dummy_encryption' and a new file is created in an existing
unencrypted directory. Similarly, this is caused by holding too many
locks when calling fscrypt_get_encryption_info().
To solve all these problems, add new helper functions:
- fscrypt_prepare_new_inode() sets up a new inode's encryption key
(fscrypt_info), using the parent directory's encryption policy and a
new random nonce. It neither reads nor writes the encryption context.
- fscrypt_set_context() persists the encryption context of a new inode,
using the information from the fscrypt_info already in memory. This
replaces fscrypt_inherit_context().
Temporarily keep fscrypt_inherit_context() around until all filesystems
have been converted to use fscrypt_set_context().
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
J721E Common Processor Board has PCIe connectors for the 1st three PCIe
instances. Configure the three PCIe instances in RC mode and disable the
4th PCIe instance.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200914152115.1788-3-kishon@ti.com
Add PCIe device tree nodes (both RC and EP) for the four
PCIe instances here.
Also add the missing translations required in the "ranges"
DT property of cbass_main to access all the four PCIe
instances.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20200914152115.1788-2-kishon@ti.com
support CLK_OF_DECLARE and builtin_platform_driver_probe
double clk init method.
add module author, description and license to support building
Soc Rk3399 clock driver as module.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022316.24045-1-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
use CONFIG_COMMON_CLK_ROCKCHIP for Rk common clk drivers.
use CONFIG_CLK_RKXX for Rk soc clk driver.
Mark CONFIG_CLK_RK3399 to "tristate",
to support building Rk3399 SoC clock driver as module.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022304.23908-1-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is used by the Rockchip clk driver, export it to allow that
driver to be compiled as a module.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-5-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is used by the Rockchip clk driver, export it to allow that
driver to be compiled as a module..
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-4-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is used by the Rockchip clk driver, export it to allow that
driver to be compiled as a module..
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200914022225.23613-3-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The parent names 'mux_timer_src_p' is not used:
In file included from drivers/clk/rockchip/clk-rk3308.c:13:0:
drivers/clk/rockchip/clk-rk3308.c:136:7: warning: ‘mux_timer_src_p’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916161740.14173-6-krzk@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add entry in the MAINTAINERS file for the Nitro Enclaves files such as
the documentation, the header files, the driver itself and the user
space sample.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Update the location of the documentation, as it has been moved to the
"virt" directory.
v7 -> v8
* No changes.
v6 -> v7
* No changes.
v5 -> v6
* No changes.
v4 -> v5
* No changes.
v3 -> v4
* No changes.
v2 -> v3
* Update file entries to be in alphabetical order.
v1 -> v2
* No changes.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-19-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add documentation on the overview of Nitro Enclaves. Include it in the
virtualization specific directory.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Move the Nitro Enclaves documentation to the "virt" directory and add
an entry for it in the corresponding index file.
v7 -> v8
* Add info about the primary / parent VM CID value.
* Update reference link for huge pages.
* Add reference link for the x86 boot protocol.
* Add license mention and update doc title / chapter formatting.
v6 -> v7
* No changes.
v5 -> v6
* No changes.
v4 -> v5
* No changes.
v3 -> v4
* Update doc type from .txt to .rst.
* Update documentation based on the changes from v4.
v2 -> v3
* No changes.
v1 -> v2
* New in v2.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-18-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a user space sample for the usage of the ioctl interface provided by
the Nitro Enclaves driver.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Track NE custom error codes for invalid page size, invalid flags and
enclave CID.
* Update the heartbeat logic to have a listener fd first, then start the
enclave and then accept connection to get the heartbeat.
* Update the reference link to the hugetlb documentation.
v6 -> v7
* Track POLLNVAL as poll event in addition to POLLHUP.
v5 -> v6
* Remove "rc" mentioning when printing errno string.
* Remove the ioctl to query API version.
* Include usage info for NUMA-aware hugetlb configuration.
* Update documentation to kernel-doc format.
* Add logic for enclave image loading.
v4 -> v5
* Print enclave vCPU ids when they are created.
* Update logic to map the modified vCPU ioctl call.
* Add check for the path to the enclave image to be less than PATH_MAX.
* Update the ioctl calls error checking logic to match the NE specific
error codes.
v3 -> v4
* Update usage details to match the updates in v4.
* Update NE ioctl interface usage.
v2 -> v3
* Remove the include directory to use the uapi from the kernel.
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* New in v2.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-17-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Makefile for the Nitro Enclaves driver, considering the option set
in the kernel config.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Remove -Wall flags, could use W=1 as an option for this.
v7 -> v8
* No changes.
v6 -> v7
* No changes.
v5 -> v6
* No changes.
v4 -> v5
* No changes.
v3 -> v4
* No changes.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Update path to Makefile to match the drivers/virt/nitro_enclaves
directory.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-16-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add kernel config entry for Nitro Enclaves, including dependencies.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* No changes.
v6 -> v7
* Remove, for now, the dependency on ARM64 arch. x86 is currently
supported, with Arm to come afterwards. The NE kernel driver can be
built for aarch64 arch.
v5 -> v6
* No changes.
v4 -> v5
* Add arch dependency for Arm / x86.
v3 -> v4
* Add PCI and SMP dependencies.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Update path to Kconfig to match the drivers/virt/nitro_enclaves
directory.
* Update help in Kconfig.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-15-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An enclave is associated with an fd that is returned after the enclave
creation logic is completed. This enclave fd is further used to setup
enclave resources. Once the enclave needs to be terminated, the enclave
fd is closed.
Add logic for enclave termination, that is mapped to the enclave fd
release callback. Free the internal enclave info used for bookkeeping.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* No changes.
v6 -> v7
* Remove the pci_dev_put() call as the NE misc device parent field is
used now to get the NE PCI device.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Update documentation to kernel-doc format.
* Use directly put_page() instead of unpin_user_pages(), to match the
get_user_pages() calls.
v4 -> v5
* Release the reference to the NE PCI device on enclave fd release.
* Adapt the logic to cpumask enclave vCPU ids and CPU cores.
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
v1 -> v2
* Add log pattern for NE.
* Remove the BUG_ON calls.
* Update goto labels to match their purpose.
* Add early exit in release() if there was a slot alloc error in the fd
creation path.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-14-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After all the enclave resources are set, the enclave is ready for
beginning to run.
Add ioctl command logic for starting an enclave after all its resources,
memory regions and CPUs, have been set.
The enclave start information includes the local channel addressing -
vsock CID - and the flags associated with the enclave.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* Add check for invalid enclave CID value e.g. well-known CIDs and
parent VM CID.
* Add custom error code for incorrect flag in enclave start info and
invalid enclave CID.
v6 -> v7
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Check for invalid enclave start flags.
* Update documentation to kernel-doc format.
v4 -> v5
* Add early exit on enclave start ioctl function call error.
* Move sanity checks in the enclave start ioctl function, outside of the
switch-case block.
* Remove log on copy_from_user() / copy_to_user() failure.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Update the naming for the ioctl command from metadata to info.
* Check for minimum enclave memory size.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
v1 -> v2
* Add log pattern for NE.
* Check if enclave state is init when starting an enclave.
* Remove the BUG_ON calls.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-13-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another resource that is being set for an enclave is memory. User space
memory regions, that need to be backed by contiguous memory regions,
are associated with the enclave.
One solution for allocating / reserving contiguous memory regions, that
is used for integration, is hugetlbfs. The user space process that is
associated with the enclave passes to the driver these memory regions.
The enclave memory regions need to be from the same NUMA node as the
enclave CPUs.
Add ioctl command logic for setting user space memory region for an
enclave.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* Add early check, while getting user pages, to be multiple of 2 MiB for
the pages that back the user space memory region.
* Add custom error code for incorrect user space memory region flag.
* Include in a separate function the sanity checks for each page of the
user space memory region.
v6 -> v7
* Update check for duplicate user space memory regions to cover
additional possible scenarios.
v5 -> v6
* Check for max number of pages allocated for the internal data
structure for pages.
* Check for invalid memory region flags.
* Check for aligned physical memory regions.
* Update documentation to kernel-doc format.
* Check for duplicate user space memory regions.
* Use directly put_page() instead of unpin_user_pages(), to match the
get_user_pages() calls.
v4 -> v5
* Add early exit on set memory region ioctl function call error.
* Remove log on copy_from_user() failure.
* Exit without unpinning the pages on NE PCI dev request failure as
memory regions from the user space range may have already been added.
* Add check for the memory region user space address to be 2 MiB
aligned.
* Update logic to not have a hardcoded check for 2 MiB memory regions.
v3 -> v4
* Check enclave memory regions are from the same NUMA node as the
enclave CPUs.
* Use dev_err instead of custom NE log pattern.
* Update the NE ioctl call to match the decoupling from the KVM API.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Remove the BUG_ON calls.
* Check if enclave max memory regions is reached when setting an enclave
memory region.
* Check if enclave state is init when setting an enclave memory region.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-12-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before setting the memory regions for the enclave, the enclave image
needs to be placed in memory. After the memory regions are set, this
memory cannot be used anymore by the VM, being carved out.
Add ioctl command logic to get the offset in enclave memory where to
place the enclave image. Then the user space tooling copies the enclave
image in the memory using the given memory offset.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Add custom error code for incorrect enclave image load info flag.
v6 -> v7
* No changes.
v5 -> v6
* Check for invalid enclave image load flags.
v4 -> v5
* Check for the enclave not being started when invoking this ioctl call.
* Remove log on copy_from_user() / copy_to_user() failure.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Set enclave image load offset based on flags.
* Update the naming for the ioctl command from metadata to info.
v2 -> v3
* No changes.
v1 -> v2
* New in v2.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-11-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An enclave, before being started, has its resources set. One of its
resources is CPU.
A NE CPU pool is set and enclave CPUs are chosen from it. Offline the
CPUs from the NE CPU pool during the pool setup and online them back
during the NE CPU pool teardown. The CPU offline is necessary so that
there would not be more vCPUs than physical CPUs available to the
primary / parent VM. In that case the CPUs would be overcommitted and
would change the initial configuration of the primary / parent VM of
having dedicated vCPUs to physical CPUs.
The enclave CPUs need to be full cores and from the same NUMA node. CPU
0 and its siblings have to remain available to the primary / parent VM.
Add ioctl command logic for setting an enclave vCPU.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* No changes.
v6 -> v7
* Check for error return value when setting the kernel parameter string.
* Use the NE misc device parent field to get the NE PCI device.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
* Calculate the number of threads per core and not use smp_num_siblings
that is x86 specific.
v5 -> v6
* Check CPUs are from the same NUMA node before going through CPU
siblings during the NE CPU pool setup.
* Update documentation to kernel-doc format.
v4 -> v5
* Set empty string in case of invalid NE CPU pool.
* Clear NE CPU pool mask on pool setup failure.
* Setup NE CPU cores out of the NE CPU pool.
* Early exit on NE CPU pool setup if enclave(s) already running.
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
* Add check for maximum vCPU id possible before looking into the CPU
pool.
* Remove log on copy_from_user() / copy_to_user() failure and on admin
capability check for setting the NE CPU pool.
* Update the ioctl call to not create a file descriptor for the vCPU.
* Split the CPU pool usage logic in 2 separate functions - one to get a
CPU from the pool and the other to check the given CPU is available in
the pool.
v3 -> v4
* Setup the NE CPU pool at runtime via a sysfs file for the kernel
parameter.
* Check enclave CPUs to be from the same NUMA node.
* Use dev_err instead of custom NE log pattern.
* Update the NE ioctl call to match the decoupling from the KVM API.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
* Remove file ops that do nothing for now - open, ioctl and release.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Remove the BUG_ON calls.
* Check if enclave state is init when setting enclave vCPU.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-10-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ioctl command logic for enclave VM creation. It triggers a slot
allocation. The enclave resources will be associated with this slot and
it will be used as an identifier for triggering enclave run.
Return a file descriptor, namely enclave fd. This is further used by the
associated user space enclave process to set enclave resources and
trigger enclave termination.
The poll function is implemented in order to notify the enclave process
when an enclave exits without a specific enclave termination command
trigger e.g. when an enclave crashes.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE PCI device.
v7 -> v8
* No changes.
v6 -> v7
* Use the NE misc device parent field to get the NE PCI device.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Update the code base to init the ioctl function in this patch.
* Update documentation to kernel-doc format.
v4 -> v5
* Release the reference to the NE PCI device on create VM error.
* Close enclave fd on copy_to_user() failure; rename fd to enclave fd
while at it.
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
* Remove log on copy_to_user() failure.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Update the NE ioctl call to match the decoupling from the KVM API.
* Add metadata for the NUMA node for the enclave memory and CPUs.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Update kzfree() calls to kfree().
* Remove file ops that do nothing for now - open.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Remove the BUG_ON calls.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-9-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves driver provides an ioctl interface to the user space
for enclave lifetime management e.g. enclave creation / termination and
setting enclave resources such as memory and CPU.
This ioctl interface is mapped to a Nitro Enclaves misc device.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the ne_devs data structure to get the refs for the NE misc device
in the NE PCI device driver logic.
v7 -> v8
* Add define for the CID of the primary / parent VM.
* Update the NE PCI driver shutdown logic to include misc device
deregister.
v6 -> v7
* Set the NE PCI device the parent of the NE misc device to be able to
use it in the ioctl logic.
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Remove the ioctl to query API version.
* Update documentation to kernel-doc format.
v4 -> v5
* Update the size of the NE CPU pool string from 4096 to 512 chars.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Remove the NE CPU pool init during kernel module loading, as the CPU
pool is now setup at runtime, via a sysfs file for the kernel
parameter.
* Add minimum enclave memory size definition.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
* Remove the WARN_ON calls.
* Remove linux/bug and linux/kvm_host includes that are not needed.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
* Remove file ops that do nothing for now - open and release.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
* Update ne_cpu_pool data structure to include the global mutex.
* Update NE misc device mode to 0660.
* Check if the CPU siblings are included in the NE CPU pool, as full CPU
cores are given for the enclave(s).
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-8-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In addition to the replies sent by the Nitro Enclaves PCI device in
response to command requests, out-of-band enclave events can happen e.g.
an enclave crashes. In this case, the Nitro Enclaves driver needs to be
aware of the event and notify the corresponding user space process that
abstracts the enclave.
Register an MSI-X interrupt vector to be used for this kind of
out-of-band events. The interrupt notifies that the state of an enclave
changed and the driver logic scans the state of each running enclave to
identify for which this notification is intended.
Create an workqueue to handle the out-of-band events. Notify user space
enclave process that is using a polling mechanism on the enclave fd.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Use the reference to the pdev directly from the ne_pci_dev instead of
the one from the enclave data structure.
v7 -> v8
* No changes.
v6 -> v7
* No changes.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Return IRQ_NONE when interrupts are not handled.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
v1 -> v2
* Add log pattern for NE.
* Update goto labels to match their purpose.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-7-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves PCI device exposes a MMIO space that this driver
uses to submit command requests and to receive command replies e.g. for
enclave creation / termination or setting enclave resources.
Add logic for handling PCI device command requests based on the given
command type.
Register an MSI-X interrupt vector for command reply notifications to
handle this type of communication events.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* No changes.
v7 -> v8
* Update function signature for submit request and retrive reply
functions as they only returned 0, no error code.
* Include command type value in the error logs of ne_do_request().
v6 -> v7
* No changes.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Return IRQ_NONE when interrupts are not handled.
v2 -> v3
* Remove the WARN_ON calls.
* Update static calls sanity checks.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
v1 -> v2
* Add log pattern for NE.
* Remove the BUG_ON calls.
* Update goto labels to match their purpose.
* Add fix for kbuild report:
https://lore.kernel.org/lkml/202004231644.xTmN4Z1z%25lkp@intel.com/
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-6-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves PCI device is used by the kernel driver as a means of
communication with the hypervisor on the host where the primary VM and
the enclaves run. It handles requests with regard to enclave lifetime.
Setup the PCI device driver and add support for MSI-X interrupts.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Init the reference to the ne_pci_dev in the ne_devs data structure.
v7 -> v8
* Add NE PCI driver shutdown logic.
v6 -> v7
* No changes.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Remove sanity checks for situations that shouldn't happen, only if
buggy system or broken logic at all.
v3 -> v4
* Use dev_err instead of custom NE log pattern.
* Update NE PCI driver name to "nitro_enclaves".
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
* Remove the WARN_ON calls.
* Remove linux/bug include that is not needed.
* Update static calls sanity checks.
* Remove "ratelimited" from the logs that are not in the ioctl call
paths.
* Update kzfree() calls to kfree().
v1 -> v2
* Add log pattern for NE.
* Update PCI device setup functions to receive PCI device data structure and
then get private data from it inside the functions logic.
* Remove the BUG_ON calls.
* Add teardown function for MSI-X setup.
* Update goto labels to match their purpose.
* Implement TODO for NE PCI device disable state check.
* Update function name for NE PCI device probe / remove.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Alexandru Ciobotaru <alcioa@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-5-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves driver keeps an internal info per each enclave.
This is needed to be able to manage enclave resources state, enclave
notifications and have a reference of the PCI device that handles
command requests for enclave lifetime management.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Add data structure to keep references to both Nitro Enclaves misc and
PCI devices.
v7 -> v8
* No changes.
v6 -> v7
* Update the naming and add more comments to make more clear the logic
of handling full CPU cores and dedicating them to the enclave.
v5 -> v6
* Update documentation to kernel-doc format.
* Include in the enclave memory region data structure the user space
address and size for duplicate user space memory regions checks.
v4 -> v5
* Include enclave cores field in the enclave metadata.
* Update the vCPU ids data structure to be a cpumask instead of a list.
v3 -> v4
* Add NUMA node field for an enclave metadata as the enclave memory and
CPUs need to be from the same NUMA node.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Add enclave memory regions and vcpus count for enclave bookkeeping.
* Update ne_state comments to reflect NE_START_ENCLAVE ioctl naming
update.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-4-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nitro Enclaves (NE) driver communicates with a new PCI device, that
is exposed to a virtual machine (VM) and handles commands meant for
handling enclaves lifetime e.g. creation, termination, setting memory
regions. The communication with the PCI device is handled using a MMIO
space and MSI-X interrupts.
This device communicates with the hypervisor on the host, where the VM
that spawned the enclave itself runs, e.g. to launch a VM that is used
for the enclave.
Define the MMIO space of the NE PCI device, the commands that are
provided by this device. Add an internal data structure used as private
data for the PCI device driver and the function for the PCI device
command requests handling.
Changelog
v9 -> v10
* Update commit message to include the changelog before the SoB tag(s).
v8 -> v9
* Fix indent for the NE PCI device command types enum.
v7 -> v8
* No changes.
v6 -> v7
* Update the documentation to include references to the NE PCI device id
and MMIO bar.
v5 -> v6
* Update documentation to kernel-doc format.
v4 -> v5
* Add a TODO for including flags in the request to the NE PCI device to
set a memory region for an enclave. It is not used for now.
v3 -> v4
* Remove the "packed" attribute and include padding in the NE data
structures.
v2 -> v3
* Remove the GPL additional wording as SPDX-License-Identifier is
already in place.
v1 -> v2
* Update path naming to drivers/virt/nitro_enclaves.
* Update NE_ENABLE_OFF / NE_ENABLE_ON defines.
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Alexandru-Catalin Vasile <lexnv@amazon.com>
Signed-off-by: Alexandru Ciobotaru <alcioa@amazon.com>
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Link: https://lore.kernel.org/r/20200921121732.44291-3-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
