Commit Graph

25 Commits

Author SHA1 Message Date
Linus Torvalds
94a9f8ad33 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] orion5x_wdt.c: add spinlocking
  [WATCHDOG] Orion: add hardware watchdog support
  [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c
  [WATCHDOG] omap_wdt.c: another ioremap() fix
  [WATCHDOG] omap_wdt.c: sync linux-omap changes
  [WATCHDOG] Add AT91SAM9X watchdog
  [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature
  [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
2008-10-12 11:51:32 -07:00
Sylver Bruneau
22ac92322c [WATCHDOG] Orion: add hardware watchdog support
This patch allows the use of the hardware watchdog in the
Marvell Orion series of ARM SoCs.

Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10 13:14:17 +00:00
Renaud CERRATO
e6bb42e3d6 [WATCHDOG] Add AT91SAM9X watchdog
Add a driver for the watchdog timer embedded into AT91SAM9X chips.

Signed-off-by: Renaud Cerrato <r.cerrato@til-technologies.fr>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10 13:09:51 +00:00
Flemming Frandsen
7d8b090661 [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature
Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, 
found on MSI Fuzzy CX700 boards.

The method used is taken directly from the winbond datasheet and 
surprisingly it differs slightly from all the other winbond watchdogs.

So far it has only been tested on the CX700 board that I have, but it 
seems to work nicely.

Signed-off-by: Flemming Frandsen <ff@nrvissing.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10 13:09:28 +00:00
Oliver Schuster
e1fee94f34 [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
Add it87xx watchdog driver
IT8716 IT8718 IT8726 IT8712-J IT8712-K

Signed-off-by: Oliver Schuster <olivers137@aol.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10 13:09:17 +00:00
David S. Miller
2e57572a50 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Conflicts:

	arch/sparc64/kernel/pci_psycho.c
2008-09-16 14:11:43 -07:00
David S. Miller
8ab0dc333e cpwatchdog: Move to drivers/watchdog/cpwd.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 17:07:01 -07:00
David S. Miller
957183f32e riowatchdog: Move under drivers/watchdog
The config stuff was already in drivers/watchdog/Kconfig

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 15:40:24 -07:00
Florian Fainelli
03ec58568a [WATCHDOG] Add support for the IDT RC32434 watchdog
Add driver for the IDT RC32434 SoC built-in watchdog.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:20:20 +00:00
Florian Fainelli
b3e8f2c13a [WATCHDOG] Add support for the built-int RDC R-321x SoC watchdog
This patch adds support for the built-in RDC R-321x SoC watchdog.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:20:05 +00:00
Jochen Friedrich
eaa95eb6ea [WATHDOG] delete unused driver mpc8xx_wdt.c
The watchdog driver mpc8xx_wdt.c was a device interface to
arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is
gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware
is supported by mpc8xxx_wdt.c.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-08-26 20:19:56 +00:00
Jean Delvare
d6efcab8a3 [WATCHDOG] Fix build with CONFIG_ITCO_VENDOR_SUPPORT=n
The problem is that iTCO_vendor_support.ko is still being built while
iTCO_vendor.h claims that its functions do not exist. The following
Makefile update fixes that. It causes iTCO_vendor_support.ko to no
longer be built if CONFIG_ITCO_VENDOR_SUPPORT=n.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-10 20:18:07 +00:00
Wim Van Sebroeck
7944d3a5a7 [WATCHDOG] more coding style clean-up's
More coding style clean-up's.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-06 20:19:41 +00:00
Anton Vorontsov
28acd02f9f [WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt
Rename the driver because now we support some MPC86xx processors.

There are no changes to the mpc83xx_wdt.c file, yet.  When possible, we do
file renames and changes separately (because Linus once asked so, because
it helps git to track the renamed files).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-08-06 13:06:25 +00:00
Adrian Bunk
f606ddf42f remove the v850 port
Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.

There also seems to be noone willing to bring this port back into a usable
state.

This patch therefore removes the v850 port.

If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:24 -07:00
Wim Van Sebroeck
63842cccb2 Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"
After Linus fixed the inline assembly, the CFLAGS option is not
needed anymore.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-06-24 13:09:26 +00:00
Thomas Mingarelli
4dc7347a3b [WATCHDOG] hpwdt: Add CFLAGS to get driver working
To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-06-17 20:58:03 +00:00
Jordan Crouse
0b36086b5d [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers
Add a watchdog timer based on the MFGPT timers in the CS5535/CS5536
companion chips to the AMD Geode GX and LX processors.  Only caveat
is that the BIOS must provide at least a one free timer, and most
do not.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-05-25 09:02:17 +00:00
Thomas Mingarelli
7f4da4745c [WATCHDOG] HP ProLiant WatchDog driver
Hp is providing a Hardware WatchDog Timer driver that will only work with the
specific HW Timer located in the HP ProLiant iLO 2 ASIC. The iLO 2 HW Timer
will generate a Non-maskable Interrupt (NMI) 9 seconds before physically
resetting the server, by removing power, so that the event can be logged to
the HP Integrated Management Log (IML), a Non-Volatile Random Access Memory
(NVRAM). The logging of the event is performed using the HP ProLiant ROM via
an Industry Standard access known as a BIOS Service Directory Entry.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-02-18 17:06:21 +00:00
Andrew Sharp
75c752e6c3 [WATCHDOG] Add support for SB1 hardware watchdog
Support watchdog timers built into SiByte MIPS SoCs.

Signed-off-by: Andy Sharp <andy.sharp@onstor.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-02-18 16:53:47 +00:00
Atsushi Nemoto
6f702fce38 [WATCHDOG] TXx9 watchdog driver
This is a driver for watchdog timer built into TXx9 MIPS SoCs.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-01-25 20:34:55 +00:00
Gilles Gigan
c4c283357d [WATCHDOG] add Nano 7240 driver
Adds support for the built-in watchdog on EPIC Nano 7240 boards from IEI.

Tested on Nano-7240RS.

Hardware documentation of the platform (including watchdog) can be found
on the IEI website: http://www.ieiworld.com

Signed-off-by: Gilles Gigan <gilles.gigan@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-12-04 16:48:06 +00:00
Jorge Boncompte [DTI2]
38ff6fd2fa [WATCHDOG] IT8212F watchdog driver
This patch adds support for the ITE Tech Inc. IT8712F EC-LPC Super I/O 
chipset found on many Pentium III and AMD motherboards. Developed using code 
from other watchdog drivers and the datasheet on ITE Tech homepage.

Signed-off-by: Jorge Boncompte <jorge@dti2.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-11-19 21:25:41 +00:00
Matteo Croce
c283cf2c09 [WATCHDOG] AR7: watchdog timer
Driver for the watchdog timer. Still doesn't reboots the machine
on some boards, but we have improved and cleaned it

Signed-off-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Nicolas Thill <nico@openwrt.org>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@akk.org>
Signed-off-by: Christer Weinigel <wingel@nano-system.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-10-23 20:35:13 +00:00
Wim Van Sebroeck
b7e04f8c61 mv watchdog tree under drivers
move watchdog tree from drivers/char/watchdog to drivers/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-10-18 10:39:03 +00:00