Commit Graph

19729 Commits

Author SHA1 Message Date
Patrick McHardy
2fd8e526f4 [NETFILTER]: bridge netfilter: remove nf_bridge_info read-only netoutdev member
Before the removal of the deferred output hooks, netoutdev was used in
case of VLANs on top of a bridge to store the VLAN device, so the
deferred hooks would see the correct output device. This isn't
necessary anymore since we're calling the output hooks for the correct
device directly in the IP stack.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:29 -08:00
Jan Engelhardt
ecb6f85e11 [NETFILTER]: Use const in struct xt_match, xt_target, xt_table
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:28 -08:00
Denis V. Lunev
3046d76746 [RAW]: Wrong content of the /proc/net/raw6.
The address of IPv6 raw sockets was shown in the wrong format, from
IPv4 ones.  The problem has been introduced by the commit
42a73808ed ("[RAW]: Consolidate proc
interface.")

Thanks to Adrian Bunk who originally noticed the problem.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:26 -08:00
Denis V. Lunev
377cf82d66 [RAW]: Family check in the /proc/net/raw[6] is extra.
Different hashtables are used for IPv6 and IPv4 raw sockets, so no
need to check the socket family in the iterator over hashtables. Clean
this out.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:24 -08:00
Eric Dumazet
533cb5b0a6 [XFRM]: constify 'struct xfrm_type'
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:20 -08:00
Laszlo Attila Toth
4a19ec5800 [NET]: Introducing socket mark socket option.
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.

It requires CAP_NET_ADMIN capability.

Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:19 -08:00
Herbert Xu
1a6509d991 [IPSEC]: Add support for combined mode algorithms
This patch adds support for combined mode algorithms with GCM being
the first algorithm supported.

Combined mode algorithms can be added through the xfrm_user interface
using the new algorithm payload type XFRMA_ALG_AEAD.  Each algorithms
is identified by its name and the ICV length.

For the purposes of matching algorithms in xfrm_tmpl structures,
combined mode algorithms occupy the same name space as encryption
algorithms.  This is in line with how they are negotiated using IKE.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:03 -08:00
Herbert Xu
38320c70d2 [IPSEC]: Use crypto_aead and authenc in ESP
This patch converts ESP to use the crypto_aead interface and in particular
the authenc algorithm.  This lays the foundations for future support of
combined mode algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:02 -08:00
Jussi Kivilinna
3692e94f15 Move usbnet.h and rndis_host.h to include/linux/usb
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes
for drivers/net/usb modules. Headers are moved because rndis_wlan will be
outside drivers/net/usb in drivers/net/wireless and yet need these headers.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:00 -08:00
Iñaky Pérez-González
303d9bf6bb rfkill: add the WiMAX radio type
Teach rfkill about wimax radios.

Had to define a KEY_WIMAX as a 'key for disabling only wimax radios',
as other radio technologies have. This makes sense as hardware has
specific keys for disabling specific radios.

The RFKILL enabling part is, otherwise, a copy and paste of any other
radio technology.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:46 -08:00
Linus Torvalds
75659ca0c1 Merge branch 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
  Remove commented-out code copied from NFS
  NFS: Switch from intr mount option to TASK_KILLABLE
  Add wait_for_completion_killable
  Add wait_event_killable
  Add schedule_timeout_killable
  Use mutex_lock_killable in vfs_readdir
  Add mutex_lock_killable
  Use lock_page_killable
  Add lock_page_killable
  Add fatal_signal_pending
  Add TASK_WAKEKILL
  exit: Use task_is_*
  signal: Use task_is_*
  sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
  ptrace: Use task_is_*
  power: Use task_is_*
  wait: Use TASK_NORMAL
  proc/base.c: Use task_is_*
  proc/array.c: Use TASK_REPORT
  perfmon: Use task_is_*
  ...

Fixed up conflicts in NFS/sunrpc manually..
2008-02-01 11:45:47 +11:00
Linus Torvalds
e1a9c9872d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (299 commits)
  [ALSA] version 1.0.16rc2
  [ALSA] hda: fix Mic in as output
  [ALSA] emu10k1 - Another EMU0404 Board ID
  [ALSA] emu10k1 - Fix kthread handling at resume
  [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
  [ALSA] emu10k1 - Use enum for emu_model types
  [ALSA] emu10k1 - Don't create emu1010 controls for non-emu boards
  [ALSA] emu10k1 - 1616(M) cardbus improvements
  [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
  [ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
  [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
  [ALSA] es1938 - improve capture hw pointer reads
  [ALSA] HDA-Intel - Add support for Intel SCH
  [ALSA] hda: Add GPIO mute support to STAC9205
  [ALSA] hda-codec - Add Dell T3400 support
  [ALSA] hda-codec - Add model for HP DV9553EG laptop
  [ALSA] hda-codec - Control SPDIF as slave
  [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH10 DeviceID's
  [ALSA] Fix Oops with PCM OSS sync
  [ALSA] hda-codec - Add speaker automute to ALC262 HP models
  ...
2008-02-01 10:16:28 +11:00
Ingo Molnar
62152d0ea7 asm-generic/tlb.h: build fix
bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:

   commit a5a19c63f4
   Author: Jeremy Fitzhardinge <jeremy@goop.org>
   Date:   Wed Jan 30 13:33:39 2008 +0100

       x86: demacro asm-x86/pgalloc_32.h

Sorry about that!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31 22:05:48 +01:00
Ingo Molnar
5aa0508508 x86: uninline __pte_free_tlb() and __pmd_free_tlb()
this also removes an include file dependency.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31 22:05:48 +01:00
Jaroslav Kysela
2ecba4ffbb [ALSA] version 1.0.16rc2
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:40:18 +01:00
James Courtier-Dutton
c94fa4c916 [ALSA] emu10k1: General cleanup, add new locks, fix alsa bug#3501, kernel bug#9304.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:24 +01:00
Takashi Iwai
3839e4f136 [ALSA] emu10k1 - Use enum for emu_model types
Use enum instead of digits for emu_model types.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:24 +01:00
Ctirad Fertr
1c02e36681 [ALSA] emu10k1 - 1616(M) cardbus improvements
This patch improves E-Mu 1616(M) cardbus support. It adds definitions of the
new Microdock and 1010 cardbus registers (thanks again for descriptions
James) and improves mixer for this card. Now you can use S/PDIF and ADAT on
Mirodock and also use headpohone output on host cardbus card as another
independent output.

Signed-off-by: Ctirad Fertr <c.fertr@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:24 +01:00
James Courtier-Dutton
190d2c46e5 [ALSA] snd:emu10k1: E-Mu updates. Fixes to firmware loading and support for 0404.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:24 +01:00
James Courtier-Dutton
44893a36ba [ALSA] emu10k1: Add comments regarding E-Mu ins and outs.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:23 +01:00
Andy Shevchenko
69252128ec [ALSA] fm801 - Add mute support for FM-only card with FM801 PCI to tuner bridge
This is improvement of the early support of the FM-only cards where the
fm801 chip represents the PCI to tuner bridge.
The tuner initialization isn't included the mute on as well as mute support
via V4L request. Proposed patch should fix this at least for 64-PCR model.

Signed-off-by: Andy Shevchenko <andy@smile.org.ua>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Jaroslav Kysela
8c12158687 [ALSA] PCM interface - rename SNDRV_PCM_TSTAMP_MMAP to SNDRV_PCM_TSTAMP_ENABLE
Change semantics for SNDRV_PCM_TSTAMP_MMAP. Doing timestamping only in
the interrupt handler might cause that hw_ptr is not related to actual
timestamp. With this change, grab timestamp at every hw_ptr update to
have always valid timestamp + ring buffer position pair.
With this change, SNDRV_PCM_TSTAMP_MMAP was renamed to
SNDRV_PCM_TSTAMP_ENABLE. It's no regression (I think).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:54 +01:00
Mark Brown
0a22b87de0 [ALSA] Bump ASoC core version number
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:51 +01:00
Laim Girdwood
9af6d95624 [ALSA] soc - Add support for passing kcontrols with events
Signed-off-by: Laim Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:51 +01:00
Liam Girdwood
4ccab3e72e [ALSA] soc - Ensure PCMs are suspended
This fixes a bug whereby PCMs were not being suspended when the rest of the
audio subsystem was suspended.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:50 +01:00
Philipp Zabel
a7a4ac86b4 [ALSA] ASoC TLV support
Add TLV support to ASoC.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:50 +01:00
Liam Girdwood
0b4d221b8d [ALSA] soc - Add device level DAPM event
Added a device level dapm event so that both the machine and codec are informed
when dapm events occur.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:50 +01:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Takashi Iwai
31e8960b35 [ALSA] Remove PCM sleep_min and tick
The 'tick' in PCM is set (again) via sw_params.  And, nobody uses
this feature at all except for a command line option of aplay.
(This is literally 'nobody', as I checked alsa-lib API calls in all
 programs in major distros.)
Above all, if we need finer wake-ups for the position update, it's
basically an issue that the driver should solve, not tuned by each
application.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:47 +01:00
Takashi Iwai
d948035a92 [ALSA] Remove PCM xfer_align sw params
The xfer_align sw_params parameter has never been used in a sane manner,
and no one understands what this does exactly.  The current
implementation looks also buggy because it allows write of shorter size
than xfer_align.  So, if you do partial writes, the write isn't actually
aligned at all.
Removing this parameter will make some pcm_lib_* code more readable
(and less buggy).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:47 +01:00
Takashi Iwai
8ace4f3c9d [ALSA] Remove indirect control access
This patch removes the indirect control access to the control elements.
The indirect access has never been used and is even broken on 32bit
ioctl wrapper.  Let's clean it up.
The pointers still remain in snd_ctl_elem_* structs just to make sure
that the struct size won't change.  Once after checking the size
consistency, we can get rid of them, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:46 +01:00
Joe Perches
b7d2a8035a [ALSA] include/sound/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:41 +01:00
Jaroslav Kysela
28e9e47384 [ALSA] PCM - added back TSTAMP ioctl for PCM (for old alsa-lib binaries)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:36 +01:00
Marcin Ślusarz
36b9cdfea6 [ALSA] info_oss: move prototype of snd_card_info_read_oss to info.h
info_oss: move prototype of snd_card_info_read_oss to info.h

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:35 +01:00
Jaroslav Kysela
b751eef1fd [ALSA] Use posix clock monotonic for PCM and timer timestamps
We need an accurate and continuous (monotonic) time sources to do
accurate synchronization among more timing sources. This patch allows
to enable monotonic timestamps for ALSA PCM devices and enables monotonic
timestamps for ALSA timer devices.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:31 +01:00
Pavel Hofman
6632d64b0b [ALSA] switching rate in STAC9460 codec of Prodigy192
* support for switching rate in STAC9460 - using set_rate_val of the akm
infrastructure
* listing all STAC9460 registers in proc
* disabling mpu401 device for Prodigy192 - otherwise the currently
  flawed mpu401 code hangs kernel when opening the midi device
* removing old unused commented-out code

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:30 +01:00
Jiri Olsa
5dbc947910 [ALSA] sound: remove dead config symbol from sound code
remove dead config symbols from sound code

Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:21 +01:00
Takashi Iwai
85db3848c5 [ALSA] Update SNDRV_HWDEP_IFACE_LAST
Updated the forgotten SNDRV_HWDEP_IFACE_LAST to point the really last member.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:20 +01:00
Takashi Iwai
045765253c [ALSA] opl3 - Fix build errors
I applied a wrong patch for 'opl3 - simplify exclusive access lock'.
Fixed now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:14 +01:00
Takashi Iwai
e5723b41ab [ALSA] Remove sequencer instrument layer
Remove sequencer instrument layer from the tree.
This mechanism hasn't been used much with the actual devices.  The only
reasonable user was OPL3 loader, and now it was rewritten to use hwdep
instead.  So, let's remove the rest of rotten codes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:13 +01:00
Takashi Iwai
05c1afe75f [ALSA] opl3 - simplify exclusive access lock
Use the exclusive access lock in hwdep instead of the own one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:13 +01:00
Takashi Iwai
224a033252 [ALSA] opl3 - Use hwdep for patch loading
Use the hwdep device for loading OPL2/3 patch data instead of the
messy sequencer instrument layer.
Due to this change, the sbiload program should be updated, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:13 +01:00
Linus Torvalds
8af03e782c Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits)
  [POWERPC] Cell IOMMU fixed mapping support
  [POWERPC] Split out the ioid fetching/checking logic
  [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
  [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
  [POWERPC] Split cell_iommu_setup_hardware() into two parts
  [POWERPC] Split out the logic that allocates struct iommus
  [POWERPC] Allocate the hash table under 1G on cell
  [POWERPC] Add set_dma_ops() to match get_dma_ops()
  [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
  [POWERPC] 85xx: Only invalidate TLB0 and TLB1
  [POWERPC] 83xx: Fix typo in mpc837x compatible entries
  [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
  [POWERPC] 83xx: rework platform Kconfig
  [POWERPC] 85xx: rework platform Kconfig
  [POWERPC] 86xx: Remove unused IRQ defines
  [POWERPC] QE: Explicitly set address-cells and size cells for muram
  [POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
  [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
  [PPC] Remove 85xx from arch/ppc
  [PPC] Remove 83xx from arch/ppc
  ...
2008-01-31 13:37:27 +11:00
Michael Ellerman
1f62a1626e [POWERPC] Add set_dma_ops() to match get_dma_ops()
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31 12:11:09 +11:00
Linus Torvalds
6232665040 Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  alpha: fix x86.git merge build error
  ia64: on UP percpu variables are not small memory model
  x86: fix arch/x86/kernel/test_nx.c modular build bug
  s390: use generic percpu linux-2.6.git
  POWERPC: use generic per cpu
  ia64: use generic percpu
  SPARC64: use generic percpu
  percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA
  modules: fold percpu_modcopy into module.c
  x86: export copy_from_user_ll_nocache[_nozero]
  x86: fix duplicated TIF on 64-bit
2008-01-31 11:48:53 +11:00
Paul Mackerras
bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Paul Mackerras
4eece4ccf9 Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx 2008-01-31 10:50:17 +11:00
Linus Torvalds
d145c7253c Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
  lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL
  lguest: Use explicit includes rateher than indirect
  lguest: get rid of lg variable assignments
  lguest: change gpte_addr header
  lguest: move changed bitmap to lg_cpu
  lguest: move last_pages to lg_cpu
  lguest: change last_guest to last_cpu
  lguest: change spte_addr header
  lguest: per-vcpu lguest pgdir management
  lguest: make pending notifications per-vcpu
  lguest: makes special fields be per-vcpu
  lguest: per-vcpu lguest task management
  lguest: replace lguest_arch with lg_cpu_arch.
  lguest: make registers per-vcpu
  lguest: make emulate_insn receive a vcpu struct.
  lguest: map_switcher_in_guest() per-vcpu
  lguest: per-vcpu interrupt processing.
  lguest: per-vcpu lguest timers
  lguest: make hypercalls use the vcpu struct
  lguest: make write() operation smp aware
  ...

Manual conflict resolved (maybe even correctly, who knows) in
drivers/lguest/x86/core.c
2008-01-31 09:35:32 +11:00
Linus Torvalds
44c3b59102 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  security: compile capabilities by default
  selinux: make selinux_set_mnt_opts() static
  SELinux: Add warning messages on network denial due to error
  SELinux: Add network ingress and egress control permission checks
  NetLabel: Add auditing to the static labeling mechanism
  NetLabel: Introduce static network labels for unlabeled connections
  SELinux: Allow NetLabel to directly cache SIDs
  SELinux: Enable dynamic enable/disable of the network access checks
  SELinux: Better integration between peer labeling subsystems
  SELinux: Add a new peer class and permissions to the Flask definitions
  SELinux: Add a capabilities bitmap to SELinux policy version 22
  SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions
  SELinux: Only store the network interface's ifindex
  SELinux: Convert the netif code to use ifindex values
  NetLabel: Add IP address family information to the netlbl_skbuff_getattr() function
  NetLabel: Add secid token support to the NetLabel secattr struct
  NetLabel: Consolidate the LSM domain mapping/hashing locks
  NetLabel: Cleanup the LSM domain hash functions
  NetLabel: Remove unneeded RCU read locks
2008-01-31 09:32:24 +11:00
Linus Torvalds
3b470ac43f Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  PPC: Fix powerpc vio_find_name to not use devices_subsys
  Driver core: add bus_find_device_by_name function
  Module: check to see if we have a built in module with the same name
  x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
  Driver core: Fix up build when CONFIG_BLOCK=N
2008-01-31 09:31:37 +11:00
Linus Torvalds
2c57ee6f92 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (249 commits)
  KVM: Move apic timer migration away from critical section
  KVM: Put kvm_para.h include outside __KERNEL__
  KVM: Fix unbounded preemption latency
  KVM: Initialize the mmu caches only after verifying cpu support
  KVM: MMU: Fix dirty page setting for pages removed from rmap
  KVM: Portability: Move kvm_fpu to asm-x86/kvm.h
  KVM: x86 emulator: Only allow VMCALL/VMMCALL trapped by #UD
  KVM: MMU: Merge shadow level check in FNAME(fetch)
  KVM: MMU: Move kvm_free_some_pages() into critical section
  KVM: MMU: Switch to mmu spinlock
  KVM: MMU: Avoid calling gfn_to_page() in mmu_set_spte()
  KVM: Add kvm_read_guest_atomic()
  KVM: MMU: Concurrent guest walkers
  KVM: Disable vapic support on Intel machines with FlexPriority
  KVM: Accelerated apic support
  KVM: local APIC TPR access reporting facility
  KVM: Print data for unimplemented wrmsr
  KVM: MMU: Add cache miss statistic
  KVM: MMU: Coalesce remote tlb flushes
  KVM: Expose ioapic to ia64 save/restore APIs
  ...
2008-01-31 09:30:10 +11:00
Thomas Gleixner
c18d1250c7 alpha: fix x86.git merge build error
a5a19c63f4 removed the include of
asm/pgalloc.h from asm-generic/tlb.h. That works fine on most
architectures, but broke ALPHA.

Fixup ALPHA by adding the include to asm-alpha/tlbflush.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:58 +01:00
Ingo Molnar
ab6e14b712 ia64: on UP percpu variables are not small memory model
Tony says:

| The CONFIG_SMP=n path in ia64 makes quite radical changes ... rather
| than putting all the per-cpu stuff into the top 64K of address space
| and providing a per-cpu TLB mapping for that range to a different
| physical address ... it just makes all the per-cpu stuff link as ordinary
| variables in .data.

the new generic percpu code got confused about this as PER_CPU_ATTRIBUTES
was defined even on UP, so it picked up that small memory model - which
was not possible to get linked. The right fix is to only define that
on SMP. This resolved the build failures in my cross-compiling environment.

also link these variables into the .percpu section even on UP - some
assembly code has offset dependencies. (such as GET_IA64_MCA_DATA() in
arch/ia64/kernel/mca_asm.S)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Tony Luck <tony.luck@intel.com>
2008-01-30 23:27:58 +01:00
travis@sgi.com
f034347470 s390: use generic percpu linux-2.6.git
Change s390 percpu.h to use asm-generic/percpu.h

Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:58 +01:00
travis@sgi.com
56f902051d POWERPC: use generic per cpu
Powerpc has a way to determine the address of the per cpu area of the
currently executing processor via the paca and the array of per cpu
offsets is avoided by looking up the per cpu area from the remote
paca's (copying x86_64).

Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Olof Johansson <olof@lixom.net>
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
2008-01-30 23:27:58 +01:00
travis@sgi.com
05991bef10 ia64: use generic percpu
ia64 has a special processor specific mapping that can be used to locate the
offset for the current per cpu area.

Cc: linux-ia64@vger.kernel.org
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:58 +01:00
travis@sgi.com
3afc620229 SPARC64: use generic percpu
Sparc64 has a way of providing the base address for the per cpu area of the
currently executing processor in a global register.

Sparc64 also provides a way to calculate the address of a per cpu area
from a base address instead of performing an array lookup.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:58 +01:00
travis@sgi.com
6ddfee0e79 modules: fold percpu_modcopy into module.c
percpu_modcopy() is defined multiple times in arch files. However, the only
user is module.c. Put a static definition into module.c and remove
the definitions from the arch files.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:58 +01:00
Mathieu Desnoyers
4bc408a5b9 x86: fix duplicated TIF on 64-bit
commit 7e9916040b
and commit eee3af4a2c

Both use the same TIF number (25) in thread_info_64.h.

This patch changes the TIF ids.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:57 +01:00
FUJITA Tomonori
c639d14e2f [SCSI] scsi_debug: add XDWRITEREAD_10 support
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:25 -06:00
James Bottomley
d3f46f39b7 [SCSI] remove use_sg_chaining
With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:02 -06:00
Boaz Harrosh
6f9a35e2da [SCSI] bidirectional command support
At the block level bidi request uses req->next_rq pointer for a second
bidi_read request.
At Scsi-midlayer a second scsi_data_buffer structure is used for the
bidi_read part. This bidi scsi_data_buffer is put on
request->next_rq->special. Struct scsi_cmnd is not changed.

- Define scsi_bidi_cmnd() to return true if it is a bidi request and a
  second sgtable was allocated.

- Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer
  from this command This API is to isolate users from the mechanics of
  bidi.

- Define scsi_end_bidi_request() to do what scsi_end_request() does but
  for a bidi request. This is necessary because bidi commands are a bit
  tricky here. (See comments in body)

- scsi_release_buffers() will also release the bidi_read scsi_data_buffer

- scsi_io_completion() on bidi commands will now call
  scsi_end_bidi_request() and return.

- The previous work done in scsi_init_io() is now done in a new
  scsi_init_sgtable() (which is 99% identical to old scsi_init_io())
  The new scsi_init_io() will call the above twice if needed also for
  the bidi_read command. Only at this point is a command bidi.

- In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not
  confused by a get-sense command that looks like bidi. This is done
  by puting NULL at request->next_rq, and restoring.

[jejb: update to sg_table and resolve conflicts
also update to blk-end-request and resolve conflicts]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:41 -06:00
Boaz Harrosh
30b0c37b27 [SCSI] implement scsi_data_buffer
In preparation for bidi we abstract all IO members of scsi_cmnd,
that will need to duplicate, into a substructure.

- Group all IO members of scsi_cmnd into a scsi_data_buffer
  structure.
- Adjust accessors to new members.
- scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of
  scsi_cmnd. And work on it.
- Adjust scsi_init_io() and  scsi_release_buffers() for above
  change.
- Fix other parts of scsi_lib/scsi.c to members migration. Use
  accessors where appropriate.

- fix Documentation about scsi_cmnd in scsi_host.h

- scsi_error.c
  * Changed needed members of struct scsi_eh_save.
  * Careful considerations in scsi_eh_prep/restore_cmnd.

- sd.c and sr.c
  * sd and sr would adjust IO size to align on device's block
    size so code needs to change once we move to scsi_data_buff
    implementation.
  * Convert code to use scsi_for_each_sg
  * Use data accessors where appropriate.

- tgt: convert libsrp to use scsi_data_buffer

- isd200: This driver still bangs on scsi_cmnd IO members,
  so need changing

[jejb: rebased on top of sg_table patches fixed up conflicts
and used the synergy to eliminate use_sg and sg_count]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
Boaz Harrosh
bb52d82f45 [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable
If we export scsi_init_io()/scsi_release_buffers() instead of
scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more
insulated from scsi_lib changes. As a bonus it will also gain bidi
capability when it comes.

[jejb: rebase on to sg_table and fix up rejections]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:03:40 -06:00
Avi Kivity
2f52d58c92 KVM: Move apic timer migration away from critical section
Migrating the apic timer in the critical section is not very nice, and is
absolutely horrible with the real-time port.  Move migration to the regular
vcpu execution path, triggered by a new bitflag.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:22 +02:00
Glauber de Oliveira Costa
a03d7f4b54 KVM: Put kvm_para.h include outside __KERNEL__
kvm_para.h potentially contains definitions that are to be used by userspace,
so it should not be included inside the __KERNEL__ block. To protect its own
data structures, kvm_para.h already includes its own __KERNEL__ block.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Acked-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:22 +02:00
Christian Ehrhardt
6f723c7911 KVM: Portability: Move kvm_fpu to asm-x86/kvm.h
This patch moves kvm_fpu asm-x86/kvm.h to allow every architecture to
define an own representation used for KVM_GET_FPU/KVM_SET_FPU.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:22 +02:00
Sheng Yang
571008dacc KVM: x86 emulator: Only allow VMCALL/VMMCALL trapped by #UD
When executing a test program called "crashme", we found the KVM guest cannot
survive more than ten seconds, then encounterd kernel panic. The basic concept
of "crashme" is generating random assembly code and trying to execute it.

After some fixes on emulator insn validity judgment, we found it's hard to
get the current emulator handle the invalid instructions correctly, for the
#UD trap for hypercall patching caused troubles. The problem is, if the opcode
itself was OK, but combination of opcode and modrm_reg was invalid, and one
operand of the opcode was memory (SrcMem or DstMem), the emulator will fetch
the memory operand first rather than checking the validity, and may encounter
an error there. For example, ".byte 0xfe, 0x34, 0xcd" has this problem.

In the patch, we simply check that if the invalid opcode wasn't vmcall/vmmcall,
then return from emulate_instruction() and inject a #UD to guest. With the
patch, the guest had been running for more than 12 hours.

Signed-off-by: Feng (Eric) Liu <eric.e.liu@intel.com>
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:21 +02:00
Marcelo Tosatti
aaee2c94f7 KVM: MMU: Switch to mmu spinlock
Convert the synchronization of the shadow handling to a separate mmu_lock
spinlock.

Also guard fetch() by mmap_sem in read-mode to protect against alias
and memslot changes.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:21 +02:00
Avi Kivity
d7824fff89 KVM: MMU: Avoid calling gfn_to_page() in mmu_set_spte()
Since gfn_to_page() is a sleeping function, and we want to make the core mmu
spinlocked, we need to pass the page from the walker context (which can sleep)
to the shadow context (which cannot).

[marcelo: avoid recursive locking of mmap_sem]

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:21 +02:00
Marcelo Tosatti
7ec5458821 KVM: Add kvm_read_guest_atomic()
In preparation for a mmu spinlock, add kvm_read_guest_atomic()
and use it in fetch() and prefetch_page().

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:20 +02:00
Avi Kivity
774ead3ad9 KVM: Disable vapic support on Intel machines with FlexPriority
FlexPriority accelerates the tpr without any patching.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:20 +02:00
Avi Kivity
b93463aa59 KVM: Accelerated apic support
This adds a mechanism for exposing the virtual apic tpr to the guest, and a
protocol for letting the guest update the tpr without causing a vmexit if
conditions allow (e.g. there is no interrupt pending with a higher priority
than the new tpr).

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:20 +02:00
Avi Kivity
b209749f52 KVM: local APIC TPR access reporting facility
Add a facility to report on accesses to the local apic tpr even if the
local apic is emulated in the kernel.  This is basically a hack that
allows userspace to patch Windows which tends to bang on the tpr a lot.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:20 +02:00
Avi Kivity
dfc5aa00cb KVM: MMU: Add cache miss statistic
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:19 +02:00
Zhang Xiantao
ec10f4750d KVM: Expose ioapic to ia64 save/restore APIs
IA64 also needs to see ioapic structure in irqchip.

Signed-off-by: xiantao.zhang@intel.com <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:19 +02:00
Zhang Xiantao
5736199afb KVM: Move kvm_vcpu_kick() to x86.c
Moving kvm_vcpu_kick() to x86.c. Since it should be
common for all archs, put its declarations in <linux/kvm_host.h>

Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:19 +02:00
Avi Kivity
edf884172e KVM: Move arch dependent files to new directory arch/x86/kvm/
This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:18 +02:00
Avi Kivity
fb56dbb31c KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM
Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
includes, not existing.  Rather than add a zillion <asm/kvm.h>s, export kvm.h
only if the arch actually supports it.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:16 +02:00
Jerone Young
51e296258c KVM: Add ifdef in irqchip struct for x86 only structures
This patch fixes a small issue where sturctures:
	kvm_pic_state
	kvm_ioapic_state

are defined inside x86 specific code and may or may not
be defined in anyway for other architectures. The problem
caused is one cannot compile userspace apps (ex. libkvm)
for other archs since a size cannot be determined for these
structures.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:15 +02:00
Dan Kenigsberg
0771671749 KVM: Enhance guest cpuid management
The current cpuid management suffers from several problems, which inhibit
passing through the host feature set to the guest:

 - No way to tell which features the host supports

  While some features can be supported with no changes to kvm, others
  need explicit support.  That means kvm needs to vet the feature set
  before it is passed to the guest.

 - No support for indexed or stateful cpuid entries

  Some cpuid entries depend on ecx as well as on eax, or on internal
  state in the processor (running cpuid multiple times with the same
  input returns different output).  The current cpuid machinery only
  supports keying on eax.

 - No support for save/restore/migrate

  The internal state above needs to be exposed to userspace so it can
  be saved or migrated.

This patch adds extended cpuid support by means of three new ioctls:

 - KVM_GET_SUPPORTED_CPUID: get all cpuid entries the host (and kvm)
   supports

 - KVM_SET_CPUID2: sets the vcpu's cpuid table

 - KVM_GET_CPUID2: gets the vcpu's cpuid table, including hidden state

[avi: fix original KVM_SET_CPUID not removing nx on non-nx hosts as it did
      before]

Signed-off-by: Dan Kenigsberg <danken@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:13 +02:00
Avi Kivity
2d2a7b9cff KVM: Export include/asm-x86/kvm.h
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:08 +02:00
Jerone Young
a162dd5873 KVM: Portability: Move cpuid structures to <asm/kvm.h>
This patch moves structures:
	kvm_cpuid_entry
	kvm_cpuid

from include/linux/kvm.h to include/asm-x86/kvm.h

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:08 +02:00
Jerone Young
244d57ece9 KVM: Portability: Move kvm_sregs and msr structures to <asm/kvm.h>
Move structures:
	kvm_sregs
	kvm_msr_entry
	kvm_msrs
	kvm_msr_list

from include/linux/kvm.h to include/asm-x86/kvm.h

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:08 +02:00
Jerone Young
3a56b20104 KVM: Portability: Move kvm_segment & kvm_dtable structure to <asm/kvm.h>
This patch moves structures:
	kvm_segment
	kvm_dtable
from include/linux/kvm.h to include/asm-x86/kvm.h

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:08 +02:00
Jerone Young
d9ecf92810 KVM: Portability: Move structure lapic_state to <asm/kvm.h>
This patch moves structure lapic_state from include/linux/kvm.h
to include/asm-x86/kvm.h

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:08 +02:00
Jerone Young
19d30b1644 KVM: Portability: Move kvm_regs to <asm/kvm.h>
This patch moves structure kvm_regs to include/asm-x86/kvm.h.
Each architecture will need to create there own version of this
structure.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:07 +02:00
Jerone Young
da1386a5bc KVM: Portability: Move x86 pic strutctures
This patch moves structures:
	kvm_pic_state
	kvm_ioapic_state

to inclue/asm-x86/kvm.h.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:07 +02:00
Jerone Young
f6a40e3bdf KVM: Portability: Move kvm_memory_alias to asm/kvm.h
This patch moves sturct kvm_memory_alias from include/linux/kvm.h
to include/asm-x86/kvm.h. Also have include/linux/kvm.h include
include/asm/kvm.h.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:53:07 +02:00
Izik Eidus
cbc9402297 KVM: Add ioctl to tss address from userspace,
Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel.  This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.

Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:52:56 +02:00
Christian Borntraeger
5f43238d03 KVM: Per-architecture hypercall definitions
Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:52:55 +02:00
Izik Eidus
6fc138d227 KVM: Support assigning userspace memory to the guest
Instead of having the kernel allocate memory to the guest, let userspace
allocate it and pass the address to the kernel.

This is required for s390 support, but also enables features like memory
sharing and using hugetlbfs backed memory.

Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:52:51 +02:00
Izik Eidus
82ce2c9683 KVM: Allow dynamic allocation of the mmu shadow cache size
The user is now able to set how many mmu pages will be allocated to the guest.

Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:52:50 +02:00
Anthony Liguori
7aa81cc047 KVM: Refactor hypercall infrastructure (v3)
This patch refactors the current hypercall infrastructure to better
support live migration and SMP.  It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.

A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace.  There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used.  There is no code
in tree that uses userspace hypercalls.

[avi: fix #ud injection on vmx]

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 17:52:46 +02:00
Jeremy Fitzhardinge
e3ed910db2 x86: use the same pgd_list for PAE and 64-bit
Use a standard list threaded through page->lru for maintaining the pgd
list on PAE.  This is the same as 64-bit, and seems saner than using a
non-standard list via page->index.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:11 +01:00
Jeremy Fitzhardinge
fa28ba21ce x86: defer cr3 reload when doing pud_clear()
PAE mode requires that we reload cr3 in order to guarantee that
changes to the pgd will be noticed by the processor.  This means that
in principle pud_clear needs to reload cr3 every time.  However,
because reloading cr3 implies a tlb flush, we want to avoid it where
possible.

pud_clear() is only used in a couple of places:
 - in free_pmd_range(), when pulling down a range of process address space, and
 - huge_pmd_unshare()

In both cases, the calling code will do a a tlb flush anyway, so
there's no need to do it within pud_clear().

In free_pmd_range(), the pud_clear is immediately followed by
pmd_free_tlb(); we can hook that to make the mmu_gather do an
unconditional full flush to make sure cr3 gets reloaded.

In huge_pmd_unshare, it is followed by flush_tlb_range, which always
results in a full cr3-reload tlb flush.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:11 +01:00
Bernhard Kaindl
f212ec4b7b x86: early boot debugging via FireWire (ohci1394_dma=early)
This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.

If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.

With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.

In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.

An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.

A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt

It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff

Signed-Off-By: Bernhard Kaindl <bk@suse.de>
Tested-By: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:11 +01:00
Jeremy Fitzhardinge
6194ba6ff6 x86: don't special-case pmd allocations as much
In x86 PAE mode, stop treating pmds as a special case.  Previously
they were always allocated and freed with the pgd.  The modifies the
code to be the same as 64-bit mode, where they are allocated on
demand.

This is a step on the way to unifying 32/64-bit pagetable allocation
as much as possible.

There is a complicating wart, however.  When you install a new
reference to a pmd in the pgd, the processor isn't guaranteed to see
it unless you reload cr3.  Since reloading cr3 also has the
side-effect of flushing the tlb, this is an expense that we want to
avoid whereever possible.

This patch simply avoids reloading cr3 unless the update is to the
current pagetable.  Later patches will optimise this further.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:11 +01:00
Ingo Molnar
8550eb9982 x86: arch/x86/mm/init_32.c cleanup
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:10 +01:00
Ingo Molnar
9af993a926 x86: make ioremap() UC by default
Yes! A mere 120 c_p_a() fixing and rewriting patches later,
we are now confident that we can enable UC by default for
ioremap(), on x86 too.

Every other architectures was doing this already. Doing so
makes Linux more robust against MTRR mixups (which might go
unnoticed if BIOS writers test other OSs only - where PAT
might override bad MTRRs defaults).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:09 +01:00
Ingo Molnar
86f03989d9 x86: cpa: fix the self-test
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:09 +01:00
Ingo Molnar
4c61afcdb2 x86: fix clflush_page_range logic
only present ptes must be flushed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:09 +01:00
Arjan van de Ven
edeed30589 x86: add testcases for RODATA and NX protections/attributes
Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd.
I also cleaned up the NX test code quite a bit, and got rid of the ugly
exception table sorting stuff.

From: Arjan van de Ven <arjan@linux.intel.com>

This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option
as well as the NX CPU feature/mappings. Both testcases can move to tests/
once that patch gets merged into mainline.
(I'm half considering moving the rodata test into mm/init.c but I'll
wait with that until init.c is unified)

As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h
for the RODATA sections, which lead to 1 page less being marked read only.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:08 +01:00
Ingo Molnar
5398f9854f x86: remove flush_agp_mappings()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Thomas Gleixner
d7c8f21a8c x86: cpa: move flush to cpa
The set_memory_* and set_pages_* family of API's currently requires the
callers to do a global tlb flush after the function call; forgetting this is
a very nasty deathtrap. This patch moves the global tlb flush into
each of the callers

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Arjan van de Ven
d1028a154c x86: make various pageattr.c functions static
change_page_attr_add is only used in pageattr.c now, so we can
make this function static.
change_page_attr() isn't used anywere at all anymore; this function
is a really bad API anyway so just remove the bloat entirely.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Ingo Molnar
f62d0f008e x86: cpa: set_memory_notpresent()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:07 +01:00
Thomas Gleixner
5f8681529c x86: fix ioremap API
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:06 +01:00
Thomas Gleixner
950f9d95be x86: fix the missing BIOS area check in page_is_ram
page_is_ram has a FIXME since ages, which reminds to sanity check the
BIOS area between 640k and 1M, which is sometimes falsely reported as
RAM in the e820 tables.

Implement the sanity check. Move the BIOS range defines from
pageattr.c into e820.h to avoid duplicate defines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:06 +01:00
Thomas Gleixner
5f5192b9fe x86: move page_is_ram() function
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:06 +01:00
Arjan van de Ven
e1271f686a x86: deprecate change_page_attr() for drivers
With the introduction of the new API, no driver or non-archcore code needs
to use c-p-a anymore, so this patch also deprecates the EXPORT_SYMBOL of CPA
(it's a horrible API after all).

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:06 +01:00
Arjan van de Ven
6d238cc4dc x86: convert CPA users to the new set_page_ API
This patch converts various users of change_page_attr() to the new,
more intent driven set_page_*/set_memory_* API set.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:06 +01:00
Arjan van de Ven
75cbade8ea x86: a new API for drivers/etc to control cache and other page attributes
Right now, if drivers or other code want to change, say, a cache attribute of a
page, the only API they have is change_page_attr(). c-p-a is a really bad API
for this, because it forces the caller to know *ALL* the attributes he wants
for the page, not just the 1 thing he wants to change. So code that wants to
set a page uncachable, needs to be aware of the NX status as well etc etc etc.

This patch introduces a set of new APIs for this, set_pages_<attr> and
set_memory_<attr>, that offer a logical change to the user, and leave all
attributes not implied by the requested logical change alone.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:06 +01:00
Thomas Gleixner
f87519e8f4 x86: introduce max_pfn_mapped
64bit uses end_pfn_map and 32bit uses max_low_pfn. There are several
files which have #ifdef'ed defines which map either to end_pfn_map or
max_low_pfn. Replace this by a universal define and clean up all the
other instances.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:34:05 +01:00
Ingo Molnar
d2e626f45c x86: add PAGE_KERNEL_EXEC_NOCACHE
add PAGE_KERNEL_EXEC_NOCACHE.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:04 +01:00
Thomas Gleixner
30551bb3ce x86: add PG_LEVEL enum
this way PG_LEVEL_1GB will be an easy change.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:04 +01:00
Thomas Gleixner
0a663088cd x86: clean up lookup_address() declarations
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:04 +01:00
Ingo Molnar
e4b71dcf54 x86: clean up arch/x86/mm/pageattr.c
do some leftover cleanups in the now unified arch/x86/mm/pageattr.c
file.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:04 +01:00
Ingo Molnar
b65e6390fb x86: introduce native_set_pte_atomic() on 64-bit too
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:01 +01:00
Ingo Molnar
12d6f21eac x86: do not PSE on CONFIG_DEBUG_PAGEALLOC=y
get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.

this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.

In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:58 +01:00
Huang, Ying
a2172e2586 x86: fix some bugs about EFI runtime code mapping
This patch fixes some bugs of making EFI runtime code executable.

- Use change_page_attr in i386 too. Because the runtime code may be
  mapped not through ioremap.

- If there is no _PAGE_NX in __supported_pte_mask, the change_page_attr
  is not called.

- Make efi_ioremap map pages as PAGE_KERNEL_EXEC_NOCACHE, because EFI runtime
  code may be mapped through efi_ioremap.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:55 +01:00
Andi Kleen
934d15854d x86: remove set_kernel_exec()
The SMP trampoline always runs in real mode, so making it executable
in the page tables doesn't make much sense because it executes
before page tables are set up. That was the only user of
set_kernel_exec(). Remove set_kernel_exec().

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:53 +01:00
Andi Kleen
1e8e23bc46 x86: introduce canon_pgprot()
Introduce canon_pgprot()

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:53 +01:00
Andi Kleen
aaa0e89023 x86: don't drop NX bit in pte modifier functions on 32-bit
The pte_* modifier functions that cleared bits dropped the NX bit on 32bit
PAE because they only worked in int, but NX is in bit 63. Fix that
by adding appropiate casts so that the arithmetic happens as long long
on PAE kernels.

I decided to just use 64bit arithmetic instead of open coding like
pte_modify() because gcc should generate good enough code for that now.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:51 +01:00
Andi Kleen
c6ca18eb75 x86: add pte_pgprot to 32-bit
64bit already had it.

Needed for later patches.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:51 +01:00
Andi Kleen
c93c82bbea x86: shrink __PAGE_KERNEL/__PAGE_KERNEL_EXEC on non PAE kernels
No need to make it 64bit there.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:50 +01:00
Ingo Molnar
d701fda860 x86: fix early_ioremap()/btmap
fix a long-standing weakness of the early-ioremap allocator: it
uses a single pgd entry for the boot mappings, and was not properly
protecting itself against crossing a 2MB (4MB) boundary.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:48 +01:00
Ingo Molnar
a8efa1cd51 x86: increase the number of boot-mappings
increase max early_ioremap() remapping size from 64K to 256K.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:45 +01:00
Ingo Molnar
1b42f51630 x86: enhance early_ioremap()
- allow nesting of up to 4 levels

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:45 +01:00
Huang, Ying
beacfaac3f x86 32-bit boot: rename bt_ioremap() to early_ioremap()
This patch renames bt_ioremap to early_ioremap, which is used in
x86_64. This makes it easier to merge i386 and x86_64 usage.

[ mingo@elte.hu: fix ]

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:44 +01:00
Huang, Ying
4716e79c99 x86: replace boot_ioremap() with enhanced bt_ioremap() - remove boot_ioremap()
This patch replaces boot_ioremap invokation with bt_ioremap and
removes the boot_ioremap implementation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:44 +01:00
Huang, Ying
0947b2f31c i386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremap
This patch makes it possible for bt_ioremap() to be used before
paging_init(), via providing an early implementation of set_fixmap()
that can be used before paging_init().

This way boot_ioremap() can be replaced by bt_ioremap().

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:44 +01:00
Ingo Molnar
f0646e43ac x86: return the page table level in lookup_address()
based on this patch from Andi Kleen:

|  Subject: CPA: Return the page table level in lookup_address()
|  From: Andi Kleen <ak@suse.de>
|
|  Needed for the next change.
|
|  And change all the callers.

and ported it to x86.git.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:43 +01:00
Andi Kleen
a5a5dc3179 x86: add pte accessors for the global bit
Needed for some test code.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:42 +01:00
Andi Kleen
4c3c4b4513 x86: clean up pte_exec
- Rename it to pte_exec() from pte_exec_kernel(). There is nothing
kernel specific in there.
- Move it into the common file because _PAGE_NX is 0 on !PAE and then
pte_exec() will be always evaluate to true.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:42 +01:00
Ingo Molnar
6371b49599 x86: change ioremap() to default to uncached
Prepare ioremap() to default to uncached. This will be the
safest - but first we have to fix CPA.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:40 +01:00
Jeremy Fitzhardinge
a5a19c63f4 x86: demacro asm-x86/pgalloc_32.h
Convert macros into inline functions, for better type-checking.

This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions.  I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:39 +01:00
Jeremy Fitzhardinge
6c435456dc x86: add mm parameter to paravirt_alloc_pd
Add mm to paravirt_alloc_pd, partly to make it consistent with
paravirt_alloc_pt, and because later changes will make use of it.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:39 +01:00
Florian Fainelli
5e3a77e9a9 x86: add support for the RDC R-321x SoC
This patch adds support for the RDC R-321x system-on-chip,
also known as R-861x-(G). It uses the generic GPIO API and
has support for the on-chip hardware watchdog.

Build-fix from: Randy Dunlap <randy.dunlap@oracle.com>

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:36 +01:00
Florian Fainelli
0acf8e3447 pci: add PCI identifiers for the RDC devices
This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:36 +01:00
Florian Fainelli
a608295935 x86: add generic GPIO support to x86
This patch adds the generic GPIO support to the x86
architecture. We do the same as for MIPS, we let
the machine override the gpio callbacks and provide
defaults one in mach-generic.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:35 +01:00
Andres Salomon
ade761496d x86: GEODE: update GPIO API to support setting multiple GPIOs at once
The existing Geode GPIO API only allows for updating one GPIO at once.  There
are instances where users want to update multiple GPIOs at once.  With the
current API, they are given two choices; either ignore the GPIO API:

      outl(0xc000, gpio_base + GPIO_OUTPUT_VAL);
      outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE);

Alternatively, call each GPIO update separately:

      geode_gpio_set(14, GPIO_OUTPUT_VAL);
      geode_gpio_set(15, GPIO_OUTPUT_VAL);
      geode_gpio_set(14, GPIO_OUTPUT_ENABLE);
      geode_gpio_set(15, GPIO_OUTPUT_ENABLE);

Neither are desirable.  This patch changes the GPIO API to allow for setting
of multiple GPIOs at once; rather than being passed an integer, we pass
a bitmask and provide a translation function.  The above code would now
look like this:

      geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL);
      geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE);

Since there are no upstream users of the GPIO API yet (afaik), best to
change this now.  This also adds a bit of sanity checking; it is no
longer possible to use a GPIO above 28.

Note the semantics of geode_gpio_isset() have changed:
geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
will only return true iff both GPIOs are set.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:33:35 +01:00
Mike Travis
dd5af90a7f x86/non-x86: percpu, node ids, apic ids x86.git fixup
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:32 +01:00
Yinghai Lu
093af8d7f0 x86_32: trim memory by updating e820
when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.

reuse some code on 64-bit as well.

here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.

The code successfully trimmed the memory map on Justin's system:

from:

 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

to:

 [    0.000000]   modified: 0000000100000000 - 0000000228000000 (usable)
 [    0.000000]   modified: 0000000228000000 - 000000022c000000 (reserved)

According to Justin it makes quite a difference:

|  When I boot the box without any trimming it acts like a 286 or 386,
|  takes about 10 minutes to boot (using raptor disks).

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:32 +01:00
Bernhard Walle
1bdbdaacf7 x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modules
enabled, then interrupts don't work for the rtc-cmos driver which results in
RTC_AIE*, RTC_PIE* and RTC_ALM being unusable.  This affects hwclock from
util-linux-ng at least on i386 since that uses RTC_PIE_ON.  (For x86-64, a
polling method is used for unknown reasons.)

This patch series now

  1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc
     driver uses to work around that problem,

  2. makes it possible to compile the old rtc driver as module, while still
     having CONFIG_HPET_EMULATE_RTC enabled and

  3. makes use of the exported functions in (1) in the new rtc-cmos driver.

This patch:

This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable
for kernel modules. It

  - exports the functions (EXPORT_SYMBOL_GPL()),
  - adds an interface to register the interrupt callback function
    instead of using only a fixed callback function and
  - replaces the rtc_get_rtc_time() function which depends on
    CONFIG_RTC with a call to get_rtc_time() which is defined in
    include/asm-generic/rtc.h.

The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is
removed by the next patch. After this, there's no (code) dependency of
this functions to CONFIG_RTC=y any more.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Robert Picco <Robert.Picco@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:28 +01:00
travis@sgi.com
4323838215 x86: change size of node ids from u8 to s16
Change the size of node ids for X86_64 from u8 to s16 to
accomodate more than 32k nodes and allow for NUMA_NO_NODE
(-1) to be sign extended to int.

Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:25 +01:00
Mike Travis
625d6cffca x86: fix early cpu_to_node panic from nr_free_zone_pages
call early_cpu_to_node() since per_cpu(cpu_to_node_map) might not be setup
yet.

I also had to export x86_cpu_to_node_map_early_ptr because of some calls
from the network code to numa_node_id():

	net/ipv4/netfilter/arp_tables.c:
	net/ipv4/netfilter/ip_tables.c:
	net/ipv4/netfilter/ip_tables.c:

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:25 +01:00
Ingo Molnar
75f2ce0331 x86: get_cycles() fix
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:24 +01:00
Ingo Molnar
5f5cd8fd60 x86: add debug of invalid per_cpu map accesses
dont crash survivable situations.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:23 +01:00
travis@sgi.com
c49a4955ea x86: add debug of invalid per_cpu map accesses
Provide a means to trap usages of per_cpu map variables before
they are setup.  Define CONFIG_DEBUG_PER_CPU_MAPS to activate.

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:22 +01:00
travis@sgi.com
834beda15e x86: change NR_CPUS arrays in numa_64 fixup
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:

	char cpu_to_node_map[NR_CPUS];

fixup:

  - Split cpu_to_node function into "early" and "late" versions
    so that x86_cpu_to_node_map_early_ptr is not EXPORT'ed and
    the cpu_to_node inline function is more streamlined.

  - This also involves setting up the percpu maps as early as possible.

  - Fix X86_32 NUMA build errors that previous version of this
    patch caused.

V2->V3:
    - add early_cpu_to_node function to keep cpu_to_node efficient
    - move and rename smp_set_apicids() to setup_percpu_maps()
    - call setup_percpu_maps() as early as possible

V1->V2:
    - Removed extraneous casts
    - Fix !NUMA builds with '#ifdef CONFIG_NUMA"

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:21 +01:00
Andi Kleen
404ee5b14b x86: convert TSC disabling to generic cpuid disable bitmap
Fix from: Ian Campbell <ijc@hellion.org.uk>

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:20 +01:00
Andi Kleen
7d851c8d3d x86: add framework to disable CPUID bits on the command line
There are already various options to disable specific cpuid bits
on the command line. They all use their own variable. Add a generic
mask to make this easier in the future.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:20 +01:00
Eduardo Habkost
9042219cd8 x86: include/asm-x86/paravirt.h: x86_64 mmu operations
Add .set_pgd field to pv_mmu_ops.

Implement pud_val(), __pud(), set_pgd(), pud_clear(), pgd_clear().

pud_clear() and pgd_clear() are implemented simply using set_pud()
and set_pmd(). They don't have a field at pv_mmu_ops.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:20 +01:00
Glauber de Oliveira Costa
1fe91514a3 x86: change function orders in paravirt.h
__pmd, pmd_val and set_pud are used before they are defined (as static)
We move them a little up in the file, so it doesn't happen.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:19 +01:00
Glauber de Oliveira Costa
94ea03cdda x86: provide read and write cr8 paravirt hooks
Since the cr8 manipulation functions ended up staying in the tree,
they can't be defined just when PARAVIRT is off: In this patch,
those functions are defined for the PARAVIRT case too.

[ mingo@elte.hu: fixes ]

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:19 +01:00
Glauber de Oliveira Costa
4c9890c246 x86: puts read and write cr8 into pv_cpu_ops
This patch adds room for read and write_cr8 functions back in
pv_cpu_ops struct

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:19 +01:00
Glauber de Oliveira Costa
0466271305 x86: put generic mm_hooks include into PARAVIRT
With PARAVIRT, we actually have arch_{dup,exit}_mmap functions,
so we can't include the generic header

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:19 +01:00
Glauber de Oliveira Costa
b03878307a x86: provide a native_init_IRQ function on 64-bit
x86_64 lacks a native_init_IRQ() function, so we turn the arch's
init_IRQ() function into a native construct

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:19 +01:00
Yinghai Lu
2274c33ebd x86: msr for AMD Fam 10h mmio
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:18 +01:00
Jesse Barnes
99fc8d424b x86, 32-bit: trim memory not covered by wb mtrrs
On some machines, buggy BIOSes don't properly setup WB MTRRs to cover all
available RAM, meaning the last few megs (or even gigs) of memory will be
marked uncached.  Since Linux tends to allocate from high memory addresses
first, this causes the machine to be unusably slow as soon as the kernel
starts really using memory (i.e.  right around init time).

This patch works around the problem by scanning the MTRRs at boot and
figuring out whether the current end_pfn value (setup by early e820 code)
goes beyond the highest WB MTRR range, and if so, trimming it to match.  A
fairly obnoxious KERN_WARNING is printed too, letting the user know that
not all of their memory is available due to a likely BIOS bug.

Something similar could be done on i386 if needed, but the boot ordering
would be slightly different, since the MTRR code on i386 depends on the
boot_cpu_data structure being setup.

This patch fixes a bug in the last patch that caused the code to run on
non-Intel machines (AMD machines apparently don't need it and it's untested
on other non-Intel machines, so best keep it off).

Further enhancements and fixes from:

  Yinghai Lu <Yinghai.Lu@Sun.COM>
  Andi Kleen <ak@suse.de>

Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:18 +01:00
Andi Kleen
03252919b7 x86: print which shared library/executable faulted in segfault etc. messages v3
They now look like:

hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]

This makes it easier to pinpoint bugs to specific libraries.

And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.

Relies on earlier patch to shorten the printk formats.

They are often now longer than 80 characters, but I think that's worth it.

[includes fix from Eric Dumazet to check d_path error value]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:18 +01:00
Andi Kleen
ca74a6f84e x86: optimize lock prefix switching to run less frequently
On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.

Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
 the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.

This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.

v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:17 +01:00
Andi Kleen
7517527891 x86: replace hard coded reservations in 64-bit early boot code with dynamic table
On x86-64 there are several memory allocations before bootmem. To avoid
them stomping on each other they used to be all hard coded in bad_area().
Replace this with an array that is filled as needed.

This cleans up the code considerably and allows to expand its use.

Cc: peterz@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:17 +01:00
Harvey Harrison
f6e8e28410 x86: rename stack_pointer to kernel_trap_sp
Choose a less generic name for such a special case.  Add
a comment explaining the odd use in X86_32.

Change the one user of stack_pointer.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:16 +01:00
Harvey Harrison
dbe3533b7f x86: clean up ptrace.h
Leave definition of pt_regs in its own section, move all kernel
code to section afterwards, unify prototype definitions, has some
conditional prototypes to make it clear what was only defined in
32 and 64 bit.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:16 +01:00
Harvey Harrison
90d43d728d x86: unify pt_regs accessors ptrace.h
Unify the definiton of:
v8086_mode
user_mode
user_mode_vm
stack_pointer
instruction_pointer
frame_pointer

in ptrace.h to make it clear where the differences are between
32 and 64 bit.  Changes macros to static inlines as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:16 +01:00
Hiroshi Shimamoto
0649547612 x86: kdump failure
kdump needs ELF_CORE_COPY_REGS in crash_save_cpu().
This lack of the macro causes the following BUG.

 SysRq : Trigger a crashdump
 ------------[ cut here ]------------
 kernel BUG at include/linux/elfcore.h:105!
 invalid opcode: 0000 [1] PREEMPT SMP

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:16 +01:00
Dmitri Vorobiev
770181d990 x86_32: remove the useless NR_syscalls macro
This is against current x86.git.

The size of the system call table for 32-bit x86 kernels is obtained by
compile-time calculation of the sys_call_table array, not from the value,
which the NR_syscalls macro expands to. This trivial patch removes the
fossil macro.

Manually tested by grepping the x86 files for the "NR_syscalls" string.
No relevant use cases found.

Build-tested using allyesconfig, allnoconfig and a couple of randconfig
instances. All builds successfully finished.

Runtime test performed using a stripped-down Debian-ish config. The system
booted successfully.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:16 +01:00
Kyle McMartin
e34cda04d4 x86: 64-bit, remove redundant cpu_has_ definitions
PSE, PGE, XMM, XMM2, and FXSR are defined as required features, and
will be optimized to a constant at compile time. Remove their redundant
definitions.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
28c6075c72 x86/paravirt: make set_pud operation common
Remove duplicate set_pud()s.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
60b3f626de x86/paravirt: make set_pmd operation common
Remove duplicate set_pmd()s.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
4eed80cd7a x86/paravirt: make set_pte operations common
Remove duplicate set_pte* operations.  PAE still needs to have special
variants of some of these because it can't atomically update a 64-bit
pte, so there's still some duplication.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
a632da2fc9 x86/paravirt: common implementation for pmd value ops
Remove duplicate __pmd/pmd_val functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
ef38503e03 x86/paravirt: common implementation for pgd value ops
Remove duplicate __pgd/pgd_val functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
773221f46f x86/paravirt: common implementation for pte value ops
Remove duplicate __pte/pte_val functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
5b8dd1e95b x86/paravirt: rearrange common mmu_ops
Rearrange the various pagetable mmu_ops to remove duplication.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:15 +01:00
Jeremy Fitzhardinge
2f98b2faac add native_pud_val and _pmd_val for 2 and 3
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:14 +01:00
Andrew Morton
118c890961 arch/x86/mm/numa_64.c: section fix
WARNING: vmlinux.o(__ksymtab+0x670): Section mismatch: reference to .init.data:x86_cpu_to_node_map_init (between '__ksymtab_x86_cpu_to_node_map_init' and '__ksymtab_node_data')

Cc: Matthew Dobson <colpatch@us.ibm.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:14 +01:00
Mike Travis
693e3c5603 x86: reduce memory and intra-node effects
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:14 +01:00
Alan Cox
466eed22d1 x86: isolate PIC/PIT in/out calls
Rather than remove and/or mangle inb_p/outb_p we want to remove the use
of them from inappropriate places. For the PIC/PIT this may eventually
depend on 32/64bitism or similar so start by adding inb/outb_pit and
inb/outb_pic so that we can make them use any scheme we settle on without
disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can
make inb_pit use udelay without messing up inb_p).

Floppy already does this for the fdc. That really only leaves the CMOS as
a core logic item to tackle, and bits of parallel port handling in the
chipset layers.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:14 +01:00
John Reiser
6b8be6df7f x86: add ENDPROC() markers
The ENDPROCs() were not used everywhere.  Some code used just END() instead,
while other code used nothing.  um/sys-i386/checksum.S didn't #include
<linux/linkage.h> .  I also got confused because gcc puts the
.type near the ENTRY, while ENDPROC puts it on the opposite end.

Signed off by: John Reiser <jreiser@BitWagon.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:13 +01:00
Harvey Harrison
f2857ce920 x86: remove last user of get_segment_eip
is_prefetch was the last user of get_segment_eip and only on
X86_32.  This function returned the faulting instruction's
address and set the upper segment limit.

Instead, use the convert_ip_to_linear helper and rely on
probe_kernel_address to do the segment checks which was
already done everywhere the segment limit was being checked
on X86_32.

Remove get_segment_eip as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:12 +01:00
Harvey Harrison
37cd9cf3da x86: common x86_32|64 naming
Rename convert_rip_to_linear to convert_ip_to_linear for shared
X86_32|64 use.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:12 +01:00
travis@sgi.com
e8c10ef9dd x86: change bios_cpu_apicid to percpu data variable
Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.

There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.

[ mingo@elte.hu: build fix ]

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:12 +01:00
travis@sgi.com
df3825c56d x86: change NR_CPUS arrays in numa_64
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:

	char cpu_to_node_map[NR_CPUS];

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:11 +01:00
travis@sgi.com
3b41908902 x86: cleanup x86_cpu_to_apicid references
Clean up references to x86_cpu_to_apicid.  Removes extraneous
comments and standardizes on "x86_*_early_ptr" for the early
kernel init references.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:11 +01:00
travis@sgi.com
30964d54e9 x86: change NR_CPUS arrays in topology
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:

	i386_cpu cpu_devices[NR_CPUS];

(And change the struct name to x86_cpu.)

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:11 +01:00
travis@sgi.com
3cc87e3f40 x86: change size of node ids from u8 to u16
Change the size of node ids from 8 bits to 16 bits to
accomodate more than 256 nodes.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:11 +01:00
travis@sgi.com
ef97001f3d x86: change size of APICIDs from u8 to u16
Change the size of APICIDs from u8 to u16.  This partially
supports the new x2apic mode that will be present on future
processor chips. (Chips actually support 32-bit APICIDs, but that
change is more intrusive. Supporting 16-bit is sufficient for now).

Signed-off-by: Jack Steiner <steiner@sgi.com>

I've included just the partial change from u8 to u16 apicids.  The
remaining x2apic changes will be in a separate patch.

In addition, the fake_node_to_pxm_map[] and fake_apicid_to_node[]
tables have been moved from local data to the __initdata section
reducing stack pressure when MAX_NUMNODES and MAX_LOCAL_APIC are
increased in size.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:10 +01:00
Yinghai Lu
aaf2304242 x86: disable the GART early, 64-bit
For K8 system: 4G RAM with memory hole remapping enabled, or more than
4G RAM installed.

when try to use kexec second kernel, and the first doesn't include
gart_shutdown. the second kernel could have different aper position than
the first kernel. and second kernel could use that hole as RAM that is
still used by GART set by the first kernel. esp. when try to kexec
2.6.24 with sparse mem enable from previous kernel (from RHEL 5 or SLES
10). the new kernel will use aper by GART (set by first kernel) for
vmemmap. and after new kernel setting one new GART. the position will be
real RAM. the _mapcount set is lost.

Bad page state in process 'swapper'
page:ffffe2000e600020 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Pid: 0, comm: swapper Not tainted 2.6.24-rc7-smp-gcdf71a10-dirty #13

Call Trace:
 [<ffffffff8026401f>] bad_page+0x63/0x8d
 [<ffffffff80264169>] __free_pages_ok+0x7c/0x2a5
 [<ffffffff80ba75d1>] free_all_bootmem_core+0xd0/0x198
 [<ffffffff80ba3a42>] numa_free_all_bootmem+0x3b/0x76
 [<ffffffff80ba3461>] mem_init+0x3b/0x152
 [<ffffffff80b959d3>] start_kernel+0x236/0x2c2
 [<ffffffff80b9511a>] _sinittext+0x11a/0x121

and
 [ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff81001c200000 on node 0
phys addr is : 0x1c200000

RHEL 5.1 kernel -53 said:
PCI-DMA: aperture base @ 1c000000 size 65536 KB

new kernel said:
Mapping aperture over 65536 KB of RAM @ 3c000000

So could try to disable that GART if possible.

According to Ingo

> hm, i'm wondering, instead of modifying the GART, why dont we simply
> _detect_ whatever GART settings we have inherited, and propagate that
> into our e820 maps? I.e. if there's inconsistency, then punch that out
> from the memory maps and just dont use that memory.
>
> that way it would not matter whether the GART settings came from a [old
> or crashing] Linux kernel that has not called gart_iommu_shutdown(), or
> whether it's a BIOS that has set up an aperture hole inconsistent with
> the memory map it passed. (or the memory map we _think_ i tried to pass
> us)
>
> it would also be more robust to only read and do a memory map quirk
> based on that, than actively trying to change the GART so early in the
> bootup. Later on we have to re-enable the GART _anyway_ and have to
> punch a hole for it.
>
> and as a bonus, we would have shored up our defenses against crappy
> BIOSes as well.

add e820 modification for gart inconsistent setting.

gart_fix_e820=off could be used to disable e820 fix.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:09 +01:00
Ingo Molnar
306c142f99 x86: pat: e820 cleanup
NOP change.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:08 +01:00
Arjan van de Ven
bc850d6b37 x86: add the capability to print fuzzy backtraces
For enhancing the 32 bit EBP based backtracer, I need the capability
for the backtracer to tell it's customer that an entry is either
reliable or unreliable, and the backtrace printing code then needs to
print the unreliable ones slightly different.

This patch adds the basic capability, the next patch will add a user
of this capability.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:07 +01:00
Ingo Molnar
076f9776f5 x86: make early printk selectable on 64-bit as well
Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well.

saves ~2K:

   text    data     bss     dec     hex filename
   7290283 3672091 1907848 12870222         c4624e vmlinux.before
   7288373 3671795 1907848 12868016         c459b0 vmlinux.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:06 +01:00
Roland McGrath
8866cd9dc9 x86: early_idt_handler improvements, 64-bit
It's not too pretty, but I found this made the "PANIC: early exception"
messages become much more reliably useful: 1. print the vector number,
2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:06 +01:00
H. Peter Anvin
88089519f3 x86 setup: initialize LDTR and TR to make life easier to Intel VT
Intel VT doesn't like to engage when the protected-mode state isn't
fully initialized.  Make life easier for it by initializing LDTR (to
null) and TR (to a dummy hunk of low memory which will never actually
be touched.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:02 +01:00
H. Peter Anvin
2a6648e65a x86: <asm/segment.h>: boot GDT entries are 32/64-independent
The boot GDT entries are common between 32- and 64-bit mode, so move
them to common code instead of having two identical copies.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:01 +01:00
Harvey Harrison
1379a5ce3f x86: move get_segment_eip() to step.c
get_segment_eip has similarities to convert_rip_to_linear(),
and is used in a similar context.  Move get_segment_eip to
step.c to allow easier consolidation.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:00 +01:00
Ingo Molnar
d50efc6c40 x86: fix UML and -regparm=3
introduce the "asmregparm" calling convention: for functions
implemented in assembly with a fixed regparm input parameters
calling convention.

mark the semaphore and rwsem slowpath functions with that.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:00 +01:00
Nick Piggin
3a556b26a2 x86: big ticket locks
This implements ticket lock support for more than 255 CPUs on x86. The
code gets switched according to the configured NR_CPUS.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:00 +01:00
Jeremy Fitzhardinge
f29192320f x86/pgtable: explain constant sign extension problem
When the _PAGE_FOO constants are defined as (1ul << _PAGE_BIT_FOO), they
become unsigned longs.  In 32-bit PAE mode, these end up being
implicitly cast to 64-bit types when used to manipulate a pte, and
because they're unsigned the top 32-bits are 0, destroying the upper
bits of the pte.

When _PAGE_FOO constants are given a signed integer type, the cast to
64-bits will sign-extend so that the upper bits are all ones,
preserving the upper pte bits in manipulations.

Explain this in a prominent place.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:59 +01:00
Jeremy Fitzhardinge
4891645e76 x86: unify paravirt pagetable accessors
Put all the defines for mapping pagetable operations to their native
versions (for the non-paravirt case) into one place.  Make the
corresponding changes to paravirt.h.

The tricky part here is that when a pagetable entry can't be updated
atomically (ie, 32-bit PAE), we need special handlers for pte_clear,
set_pte_atomic and set_pte_present.  However, the other two modes
don't need special handling for these, and can use a common
set_pte(_at) path.

[ mingo@elte.hu: fixes ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:58 +01:00
Jeremy Fitzhardinge
8405b122ad x86: unify zero_page definition
Move ZERO_PAGE/empty_zero_page to common place.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:58 +01:00
Jeremy Fitzhardinge
d8d89827fc x86: fix warning
&ptep->pte isn't always an unsigned long *, so cast it to avoid a warning.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:58 +01:00
Jeremy Fitzhardinge
195466dc4b x86: pgtable: unify pte accessors
Make various pte accessors common.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:58 +01:00
Jeremy Fitzhardinge
c8e5393ab3 x86: page.h: make pte_t a union to always include
Make sure pte_t, whatever its definition, has a pte element with type
pteval_t.  This allows common code to access it without needing to be
specifically parameterised on what pagetable mode we're compiling for.
For 32-bit, this means that pte_t becomes a union with "pte" and "{
pte_low, pte_high }" (PAE) or just "pte_low" (non-PAE).

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:57 +01:00
Ingo Molnar
b7fff536d0 x86: fix pte_modify() bug
fix sign extension bug in PTE_MASK / _PTE_CHG_MASK.

this resolves the following bootup crash on PAE systems:

[   94.710726] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4
[   94.717764] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4
[   94.724772] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4
[   94.731777] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:57 +01:00
Ingo Molnar
3847231167 x86: unify pgtable accessors which use, #2
based on:

 Subject: x86: unify pgtable accessors which use supported_pte_mask
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:57 +01:00
Jeremy Fitzhardinge
6fdc05d479 x86: unify pgtable accessors which use
Make users of supported_pte_mask common.  This has the side-effect of
introducing the variable for 32-bit non-PAE, but I think its a pretty
small cost to simplify the code.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:57 +01:00
Jeremy Fitzhardinge
c3bcfb57e1 x86: mask NX from pte_pfn
In 32-bit PAE, mask NX from pte_pfn, since it isn't part of the PFN.
This code is due for unification anyway, but this fixes a latent bug.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:57 +01:00
Jeremy Fitzhardinge
4614139c6a x86/pgtable: unify pagetable accessors, #6
Unify functions to test and set bits in pagetable entries.

NOP: only moves existing code around, without any change to it.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:56 +01:00
Ingo Molnar
e8a4852453 x86/pgtable: unify pagetable accessors, #5
reorder. NOP.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:56 +01:00
Ingo Molnar
7d00a1ae54 x86/pgtable: unify pagetable accessors, #4
add new ops to 32-bit.

based on:

 Subject: x86/pgtable: unify pagetable accessors
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:56 +01:00
Ingo Molnar
1444d2da44 x86/pgtable: unify pagetable accessors, #3
change the pte_mk inlines to the unified format. Non-NOP!

based on:

 Subject: x86/pgtable: unify pagetable accessors
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:56 +01:00
Ingo Molnar
92ac166f3a x86/pgtable: unify pagetable accessors, #2
change the pte_dirty/* inlines to the unified format. Non-NOP!

based on:

 Subject: x86/pgtable: unify pagetable accessors
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:55 +01:00
Ingo Molnar
dcbae6b377 x86/pgtable: unify pagetable accessors, #1
based on:

 Subject: x86/pgtable: unify pagetable accessors
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:55 +01:00
Ingo Molnar
61f38226de x86/pgtable: fix constant sign extension problem
based on:

 Subject: x86/pgtable: fix constant sign extension problem
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:55 +01:00
Jeremy Fitzhardinge
6c38665582 x86: move all asm/pgtable constants into one place
32 and 64-bit use the same flags for pagetable entries, so make them all common.

[ mingo@elte.hu: fixes ]

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:55 +01:00
Ingo Molnar
82bc03fc15 x86: add PWT to NOCACHE flags
add PWT bit to NOCACHE flags. No real difference to CPUs, but needed
later for PAT.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:54 +01:00
Markus Metzger
87e8407f9a x86, ptrace: add bts_struct size to status command
Return the size of bts_struct in the PTRACE_BTS_STATUS command.
Change types to u32.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:54 +01:00
Ingo Molnar
58f6f6ea1d x86: migration helpers for KVM
migration helpers for KVM.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:54 +01:00
Ananth N Mavinakayanahalli
8c1c935642 x86: kprobes: add kprobes smoke tests that run on boot
Here is a quick and naive smoke test for kprobes. This is intended to
just verify if some unrelated change broke the *probes subsystem. It is
self contained, architecture agnostic and isn't of any great use by itself.

This needs to be built in the kernel and runs a basic set of tests to
verify if kprobes, jprobes and kretprobes run fine on the kernel. In case
of an error, it'll print out a message with a "BUG" prefix.

This is a start; we intend to add more tests to this bucket over time.

Thanks to Jim Keniston and Masami Hiramatsu for comments and suggestions.

Tested on x86 (32/64) and powerpc.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:53 +01:00
travis@sgi.com
3334052a32 x86: unify percpu.h
Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty
small so this is simply adding them together.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:53 +01:00
travis@sgi.com
072a1e6953 x86: use generic percpu on 64-bit
x86_64 provides an optimized way to determine the local per cpu area
offset through the pda and determines the base by accessing a remote
pda.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
travis@sgi.com
0af8a5ccc5 x86_32: use generic percpu.h
x86_32 only provides a special way to obtain the local per cpu area offset
via x86_read_percpu. Otherwise it can fully use the generic handling.

Cc: ak@suse.de
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
travis@sgi.com
acdac87202 percpu: make the asm-generic/percpu.h more "generic"
- add support for PER_CPU_ATTRIBUTES

- fix generic smp percpu_modcopy to use per_cpu_offset() macro.

Add the ability to use generic/percpu even if the arch needs to override
several aspects of its operations. This will enable the use of generic
percpu.h for all arches.

An arch may define:

__per_cpu_offset	Do not use the generic pointer array. Arch must
			define per_cpu_offset(cpu) (used by x86_64, s390).

__my_cpu_offset		Can be defined to provide an optimized way to determine
			the offset for variables of the currently executing
			processor. Used by ia64, x86_64, x86_32, sparc64, s/390.

SHIFT_PTR(ptr, offset)	If an arch defines it then special handling
			of pointer arithmentic may be implemented. Used
			by s/390.

(Some of these special percpu arch implementations may be later consolidated
so that there are less cases to deal with.)

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
travis@sgi.com
5280e004fc percpu: move arch XX_PER_CPU_XX definitions into linux/percpu.h
- Special consideration for IA64: Add the ability to specify
  arch specific per cpu flags

- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.

The arch definitions are all the same. So move them into linux/percpu.h.

We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
travis@sgi.com
b32ef636a5 percpu: use a kconfig variable to signal arch specific percpu setup
The use of the __GENERIC_PERCPU is a bit problematic since arches
may want to run their own percpu setup while using the generic
percpu definitions. Replace it through a kconfig variable.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:51 +01:00
Miguel Boton
4d022e35fd x86: reboot_{32|64}.c unification
reboot_{32|64}.c unification patch.

This patch unifies the code from the reboot_32.c and reboot_64.c files.

It has been tested in computers with X86_32 and X86_64 kernels and it
looks like all reboot modes work fine (EFI restart system hasn't been
tested yet).

Probably I made some mistakes (like I usually do) so I hope
we can identify and fix them soon.

Signed-off-by: Miguel Boton <mboton@gmail.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:51 +01:00
Arjan van de Ven
79b4cc5ee7 debug: move WARN_ON() out of line
A quick grep shows that there are currently 1145 instances of WARN_ON
in the kernel. Currently, WARN_ON is pretty much entirely inlined,
which makes it hard to enhance it without growing the size of the kernel
(and getting Andrew unhappy).

This patch build on top of Olof's patch that introduces __WARN,
and places the slowpath out of line. It also uses Ingo's suggestion
to not use __FUNCTION__ but to use kallsyms to do the lookup;
this saves a ton of extra space since gcc doesn't need to store the function
string twice now:

3936367  833603  624736 5394706  525112 vmlinux.before
3917508  833603  624736 5375847  520767 vmlinux-slowpath

15Kb savings...

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Olof Johansson <olof@lixom.net>
Acked-by: Matt Meckall <mpm@selenic.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:50 +01:00
Olof Johansson
3a6a62f96f debug: introduce __WARN()
Introduce __WARN() in the generic case, so the generic WARN_ON()
can use arch-specific code for when the condition is true.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:50 +01:00
Ingo Molnar
0c2bd5a5e3 x86: clean up include/asm-x86/calling.h
clean up include/asm-x86/calling.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:49 +01:00
Jeremy Fitzhardinge
11b7c7dc94 x86: page.h: move things back to their own files
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199321648 28800
# Node ID 22f6a5902285b58bfc1fbbd9e183498c9017bd78
# Parent  bba9287641ff90e836d090d80b5c0a846aab7162
x86: page.h: move things back to their own files

Oops, asm/page.h has turned into an #ifdef hellhole.  Move
32/64-specific things back to their own headers to make it somewhat
comprehensible...

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:44 +01:00
Jeremy Fitzhardinge
e62f4473f3 x86: page.h: move remaining bits and pieces
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199319657 28800
# Node ID bba9287641ff90e836d090d80b5c0a846aab7162
# Parent  d617b72a0cc9d14bde2087d065c36d4ed3265761
x86: page.h: move remaining bits and pieces

Move the remaining odds and ends into page.h.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:44 +01:00
Jeremy Fitzhardinge
98fd5aee34 x86: page.h: move pa and va related things
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199319656 28800
# Node ID d617b72a0cc9d14bde2087d065c36d4ed3265761
# Parent  3bd7db6e85e66e7f3362874802df26a82fcb2d92
x86: page.h: move pa and va related things

Move and unify the virtual<->physical address space conversion
functions.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:43 +01:00
Ingo Molnar
6724a1d2fc x86: page.h: move and unify types for pagetable entry, #6
based on:

 Subject: x86: page.h: move and unify types for pagetable entry
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:43 +01:00
Jeremy Fitzhardinge
881d90d0da x86: page.h: move and unify types for pagetable entry
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199319654 28800
# Node ID 3bd7db6e85e66e7f3362874802df26a82fcb2d92
# Parent  f7e7db3facd9406545103164f9be8f9ba1a2b549
x86: page.h: move and unify types for pagetable entry definitions

This patch:

1. Defines arch-specific types for the contents of a pagetable entry.
That is, 32-bit entries for 32-bit non-PAE, and 64-bit entries for
32-bit PAE and 64-bit.  However, even though the latter two are the
same size, they're defined with different types in order to retain
compatibility with printk format strings, etc.

2. Defines arch-specific pte_t.  This is different because 32-bit PAE
defines it in two halves, whereas 32-bit PAE and 64-bit define it as a
single entry.  All the other pagetable levels can be defined in a
common way.  This also defines arch-specific pte_val/make_pte functions.

3. Define PAGETABLE_LEVELS for each architecture variation, for later use.

4. Define common pagetable entry accessors in a paravirt-compatible
way. (64-bit does not yet use paravirt-ops in any way).

5. Convert a few instances of using a *_val() as an lvalue where it is
no longer a macro.  There are still places in the 64-bit code which
use pte_val() as an lvalue.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:43 +01:00
Ingo Molnar
38f0f12793 x86: page.h: move and unify types for pagetable entry, #5
based on:

 Subject: x86: page.h: move and unify types for pagetable entry
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:43 +01:00
Ingo Molnar
d6e3cf63e9 x86: page.h: move and unify types for pagetable entry, #4
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:43 +01:00
Ingo Molnar
ba2b6c525e x86: page.h: move and unify types for pagetable entry, #3
based on:

 Subject: x86: page.h: move and unify types for pagetable entry
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:42 +01:00
Ingo Molnar
7a2389b457 x86: page.h: move and unify types for pagetable entry, #2
based on:

 Subject: x86: page.h: move and unify types for pagetable entry
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:42 +01:00
Ingo Molnar
3da1bcc265 x86: page.h: move and unify types for pagetable entry, #1
based on:

 Subject: x86: page.h: move and unify types for pagetable entry
 From: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:42 +01:00
Jeremy Fitzhardinge
74ef649fe8 x86: add _AT() macro to conditionally cast
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199317452 28800
# Node ID f7e7db3facd9406545103164f9be8f9ba1a2b549
# Parent  4d9a413a0f4c1d98dbea704f0366457b5117045d
x86: add _AT() macro to conditionally cast

Define _AT(type, value) to conditionally cast a value when compiling C
code, but not when used in assembler.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:42 +01:00
Jeremy Fitzhardinge
345b904c3f x86: page.h: unify page copying and clearing
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199317362 28800
# Node ID 4d9a413a0f4c1d98dbea704f0366457b5117045d
# Parent  ba0ec40a50a7aef1a3153cea124c35e261f5a2df
x86: page.h: unify page copying and clearing

Move, and to some extent unify, the various page copying and clearing
functions.  The only unification here is that both architectures use
the same function for copying/clearing user and kernel pages.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:42 +01:00
Jeremy Fitzhardinge
83a5101bf2 x86: page.h: unify constants
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199317360 28800
# Node ID ba0ec40a50a7aef1a3153cea124c35e261f5a2df
# Parent  c45c263179cb78284b6b869c574457df088027d1
x86: page.h: unify constants

There are many constants which are shared by 32 and 64-bit.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:41 +01:00
Andi Kleen
68071a9665 x86: remove the now unused X86_FEATURE_SYNC_RDTSC
we need to know whether RDTSC is synchronous or not.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:40 +01:00
Ingo Molnar
92767af0e3 x86: fix sched_clock()
[ andi@firstfloor.org: build fix ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:40 +01:00
Andi Kleen
6d63de8dbc x86: remove get_cycles_sync
rdtsc is now speculation-safe, so no need for the sync variants of
the APIs.

[ mingo@elte.hu: removed the nsec_barrier() complication. ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:39 +01:00
Ingo Molnar
e402644013 x86: map vsyscalls early enough
map vsyscalls early enough. This is important if a __vsyscall_fn
function is used by other kernel code too.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:39 +01:00
Ingo Molnar
cdc7957d19 x86: move native_read_tsc() offline
move native_read_tsc() offline.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:39 +01:00
Andi Kleen
fde1b3fa94 x86: introduce rdtsc_barrier()
rdtsc_barrier() is a new barrier primitive that stops RDTSC speculation
to avoid races with timer interrupts on other CPUs.

It expands either to LFENCE (for Intel CPUs) or MFENCE (for
AMD CPUs) which stops RDTSC on all currently known microarchitectures
that implement SSE. On CPUs without SSE there is generally no RDTSC
speculation.

[ mingo@elte.hu: renamed it to rdtsc_barrier() and made it x86-only ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:38 +01:00
WANG Cong
2a10e7c412 git-x86: unbreak UML
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:38 +01:00
Andi Kleen
bd61643ef6 x86: move nop declarations into separate include file
Moving things out of processor.h is always a good thing.

Also needed to avoid include loop in later patch.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:38 +01:00
Andi Kleen
707fa8ed92 x86: Implement support to synchronize RDTSC with LFENCE on Intel CPUs
According to Intel RDTSC can be always synchronized with LFENCE
on all current CPUs. Implement the necessary CPUID bit for that.

It is unclear yet if that is true for all future CPUs too,
but if there's another way the kernel can be always updated.

Cc: asit.k.mallick@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:37 +01:00
Andi Kleen
de4218634e x86: implement support to synchronize RDTSC through MFENCE on AMD CPUs
According to AMD RDTSC can be synchronized through MFENCE.
Implement the necessary CPUID bit for that.

Cc: andreas.herrmann3@amd.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:37 +01:00
Andi Kleen
27efeb6771 x86: make ptrace.h safe to include from assembler code
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:36 +01:00
Glauber de Oliveira Costa
2f485ef568 x86: move patching code to arch-specific file.
The core patching code for paravirt is sufficiently different
among i386 and x86_64, and we move them to specific files.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:10 +01:00
Glauber de Oliveira Costa
21438f7c13 x86: add CLBR_ defines for 64-bit
x86_64 needs a potentially larger clobber list than i386, due to its calling
convention. So we add more CLBR_ defines for it.
Note that CLBR_ANY is different for each of the architectures, since it comprises
the notion of "All call clobbers in this architecture"

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:09 +01:00
Glauber de Oliveira Costa
1954448fb0 x86: cleanup CLI_STRING, STI_STRING and friends
Since the advent of ticket locking, CLI_STRING, STI_STRING, and friends
are not used anymore. They can now be safely deleted.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:09 +01:00
Glauber de Oliveira Costa
e801f864ec x86: adds paravirt hook for swapgs
This patch adds paravirt hook for swapgs operation, which is a privileged
operation in x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:08 +01:00
Glauber de Oliveira Costa
4a8c4c4e10 x86: add macro for privileged 64-bit operation
i386 has a macro GET_CR0_INTO_EAX, used in early trap handling code.
x86_64 has similar needs, only it needs to put cr2 into rcx. We provide
a macro for such task, in the same way

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:07 +01:00
Glauber de Oliveira Costa
2e47d3e6c3 x86: change irq functions to accomodate 64-bit
This patch changes the irq handling function definitions
in paravirt.h (like raw_local_irq_disable) to accomodate for x86_64.
The differences are in the calling convention.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:07 +01:00
Glauber de Oliveira Costa
6057fc827b x86: adjust assembly macros on 64-bit as well.
This patch adjust the paravirt macros used in assembly code
to accomodate for x86_64 as well.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:06 +01:00
Glauber de Oliveira Costa
658be9d395 x86: change assembly definition of paravirt_patch_site
To account for differences in x86_64, we change the macros that
create raw instances of the paravirt_patch_site struct.
We need to align 64-pointers to 64-bit boundaries, so we add an alignment
directive. Also, we need to make room for a word-sized pointer,
instead of a fixed 32-bit one

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:06 +01:00
Glauber de Oliveira Costa
e5aaac4436 x86: provide paravirtualized hook for rdtscp
This patch adds a field in pv_cpu_ops for a paravirtualized hook
for rdtscp, needed for x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:05 +01:00
Glauber de Oliveira Costa
f72a9ef979 x86: cleanup write_tsc
write_tsc() does not need to be enclosed in any paravirt closure,
as it uses wrmsr(). So we rip off the duplicate in msr.h
and the definition from paravirt.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:05 +01:00
Glauber de Oliveira Costa
a4746364da x86: adjust PVOP_CALL/VCALL macros for 64-bit
This patch adjust the PVOP_VCALL and PVOP_CALL macros to
work with x86_64. It has a different calling convention, and
we use auxiliary macros to account for both calling conventions
as cleanly as possible

Comments are adjusted accordingly.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:05 +01:00
Markus Metzger
c6334593c6 x86, ptrace: overflow signal API
Establish the user API for sending a user-defined signal to the traced task on a BTS buffer overflow.

This should complete the user API for the BTS ptrace extension.
The patches so far implement wrap-around overflow handling as is needed for debugging.

The remaining open is another overflow handling mechanism that sends a signal to the traced task on a buffer overflow.
This will take some more time from my side.

Since, from a user perspective, this occurs behind the scenes, the patch set should already be useful. More features may/will be added on top of it (overflow signal, pageable back-up buffers, kernel tracing, core file support, profiling, ...).

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:04 +01:00
Markus Metzger
cba4b65d35 x86, ptrace: add buffer size checks
Pass the buffer size for (most) ptrace commands that pass user-allocated buffers and check that size before accessing the buffer. Unfortunately, PTRACE_BTS_GET already uses all 4 parameters.
Commands that access user buffers return the number of bytes or records read or written.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:03 +01:00
Markus Metzger
e6ae5d9540 x86, ptrace: support 32bit-cross-64bit BTS recording
Support BTS recording of 32bit and 64bit tasks from 32bit or 64bit tasks.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:03 +01:00
Venki Pallipadi
bde6f5f59c x86: voluntary leave_mm before entering ACPI C3
Aviod TLB flush IPIs during C3 states by voluntary leave_mm()
before entering C3.

The performance impact of TLB flush on C3 should not be significant with
respect to C3 wakeup latency. Also, CPUs tend to flush TLB in hardware while in
C3 anyways.

On a 8 logical CPU system, running make -j2, the number of tlbflush IPIs goes
down from 40 per second to ~ 0. Total number of interrupts during the run
of this workload was ~1200 per second, which makes it ~3% savings in wakeups.

There was no measurable performance or power impact however.

[ akpm@linux-foundation.org: symbol export fixes. ]

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:01 +01:00
Parag Warudkar
bca25bafbb x86: fix dmi_alloc() to not advance alloc index in case of
dmi_alloc() for CONFIG_X86_64 is defined to allocate from a static array
and it maintains a allocation index which is advanced each time allocation
is attempted - it gets incremented even if an allocation fails thereby
depriving any future request that may be small enough to be satisfied from
the array.

Fix this by first testing if allocation is going to be possible and
incrementing alloc index only then.

Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:59 +01:00
Ingo Molnar
aca46ba292 x86: remove unused include/asm-x86/processor_32/64.h
remove unused include/asm-x86/processor_32/64.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:58 +01:00
Glauber de Oliveira Costa
2f66dcc933 x86: finish processor.h integration
What's left in processor_32.h and processor_64.h cannot be cleanly
integrated. However, it's just a couple of definitions. They are moved
to processor.h around ifdefs, and the original files are deleted. Note that
there's much less headers included in the final version.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:57 +01:00
Glauber de Oliveira Costa
7ba65c7e17 x86: remove __init modifier from header declaration
This patch removes the __init modifier from an extern function
declaration in acpi.h.

Besides not being strictly needed, it requires the inclusion of
linux/init.h, which is usually not even included directly, increasing
header mess by a lot.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:57 +01:00
Roland McGrath
bb61682b3f x86: x86 core dump TLS
This makes ELF core dumps of 32-bit processes include a new
note type NT_386_TLS (0x200) giving the contents of the TLS
slots in struct user_desc format.  This lets post mortem
examination figure out what the segment registers mean like
the debugger does with get_thread_area on a live process.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:56 +01:00
Roland McGrath
a97f52e678 x86: compat_binfmt_elf
This switches x86-64's 32-bit ELF support to use the shared
fs/compat_binfmt_elf.c code instead of our own ia32_binfmt.c.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:55 +01:00
Roland McGrath
60b3b9af35 x86: x86 user_regset cleanup
This removes a bunch of dead code that is no longer needed now
that the user_regset interfaces are being used for all these jobs.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:55 +01:00
Roland McGrath
975511be74 x86: x86 CORE_DUMP_USE_REGSET
This switches x86 to the user_regset-based code for ELF core dumps.
The core dumps come out exactly the same as before.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:54 +01:00
Roland McGrath
1bd5718ce5 x86: x86 TLS desc_struct cleanup
This cleans up the TLS code to use struct desc_struct and to separate the
encoding and installation magic from the interface wrappers.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:51 +01:00
Roland McGrath
1eeaed7679 x86: x86 i387 cleanup
This removes all the old code that is no longer used after
the i387 unification and cleanup.  The i387_64.h is renamed
to i387.h with no changes, but since it replaces the nonempty
one-line stub i387.h it looks like a big diff and not a rename.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:51 +01:00
Roland McGrath
4421011120 x86: x86 i387 user_regset
This revamps the i387 code to be shared across 32-bit, 64-bit,
and 32-on-64.  It does so by consolidating the code in one place
based on the user_regset accessor interfaces.  This switches
32-bit to using the i387_64.h header and 64-bit to using the
i387.c that was previously i387_32.c, but that's what took the
least cleanup in each file.  Here i387.h is stubbed to always
include i387_64.h rather than renaming the file, to keep this
diff smaller and easier to read.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:50 +01:00
Roland McGrath
cc927a25bd x86: x86 i387 header cleanup
This moves some code into asm-x86/i387_64.h in preparation for
unifying this code between 32 and 64.  The 32-bit versions of
some things are copied in some existing names changed to match
32-bit names and share code.  For 64, save_i387 is moved into
an inline from i387_64.c; this matches restore_i387, which is
already an inline, and makes sense since there is exactly one
caller (in signal_64.c).  The save_i387 function could use more
cosmetic cleanup, but it is just moved verbatim in this patch.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:49 +01:00
Roland McGrath
99f8ecdf45 x86: x86 i387 unify structs
The i387_fxsave_struct formats really have the same layout
on 32 and 64, with only some slightly different use of a few
fields.  The i387_fsave_struct and i387_soft_struct formats
are never used by 64-bit kernels, but it doesn't hurt to
have the unused types in the union and cuts down on the
amount of #ifdef hair required throughout the i387 code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:48 +01:00
Roland McGrath
863aec8602 x86: x86-64 wired cpu_has macros
This adds hard-wired definitions for the remaining cpu_has_* macros
that correspond to flags required-features.h demands are set for
64-bit.  Using these can efficiently avoid some #ifdef's when
merging 32-bit and 64-bit code together.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:48 +01:00
Roland McGrath
c269f19617 x86: compat_sys_ptrace
This adds a generic definition of compat_sys_ptrace that calls
compat_arch_ptrace, parallel to sys_ptrace/arch_ptrace.  Some
machines needing this already define a function by that name.
The new generic function is defined only on machines that
put #define __ARCH_WANT_COMPAT_SYS_PTRACE into asm/ptrace.h.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:48 +01:00
Roland McGrath
032d82d906 x86: compat_ptrace_request
This adds a compat_ptrace_request that is the analogue of ptrace_request
for the things that 32-on-64 ptrace implementations can share in common.
So far there are just a couple of requests handled generically.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:47 +01:00
Roland McGrath
5bde4d1817 x86: user_regset user-copy helpers
This defines two new inlines in linux/regset.h, for use in arch_ptrace
implementations and the like.  These provide simplified wrappers for using
the user_regset interfaces to copy thread regset data into the caller's
user-space memory.  The inlines are trivial, but make the common uses in
places such as ptrace implementation much more concise, easier to read, and
less prone to code-copying errors.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:47 +01:00
Roland McGrath
bae3f7c39d x86: user_regset helpers
This adds some inlines to linux/regset.h intended for arch code to use in
its user_regset get and set functions.  These make it pretty easy to deal
with the interface's optional kernel-space or user-space pointers and its
generalized access to a part of the register data at a time.

In simple cases where the internal data structure matches the exported
layout (core dump format), a get function can be nothing but a call to
user_regset_copyout, and a set function a call to user_regset_copyin.

In other cases the exported layout is usually made up of a few pieces each
stored contiguously in a different internal data structure.  These helpers
make it straightforward to write a get or set function by processing each
contiguous chunk of the data in order.  The start_pos and end_pos arguments
are always constants, so these inlines collapse to a small amount of code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:45 +01:00
Roland McGrath
bdf88217b7 x86: user_regset header
The new header <linux/regset.h> defines the types struct user_regset and
struct user_regset_view, with some associated declarations.  This new set
of interfaces will become the standard way for arch code to expose
user-mode machine-specific state.  A single set of entry points into arch
code can do all the low-level work in one place to fill the needs of core
dumps, ptrace, and any other user-mode debugging facilities that might come
along in the future.

For existing arch code to adapt to the user_regset interfaces, each arch
can work from the code it already has to support core files and ptrace.
The formats you want for user_regset are the core file formats.  The only
wrinkle in adapting old ptrace implementation code as user_regset get and
set functions is that these functions can be called on current as well as
on another task_struct that is stopped and switched out as for ptrace.
For some kinds of machine state, you may have to load it directly from CPU
registers or otherwise differently for current than for another thread.
(Your core dump support already handles this in elf_core_copy_regs for
current and elf_core_copy_task_regs for other tasks, so just check there.)
The set function should also be made to work on current in case that
entails some special cases, though this was never required before for
ptrace.  Adding this flexibility covers the arch needs to open the door to
more sophisticated new debugging facilities that don't always need to
context-switch to do every little thing.

The copyin/copyout helper functions (in a later patch) relieve the arch
code of most of the cumbersome details of the flexible get/set interfaces.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:44 +01:00
Harvey Harrison
0ddc9cc8fd x86: unify module_{32|64}.h
This adds one case to the MODULE_PROC_FAMILY block testing
for X86_64.  There are no new things defined on X86_64 than
there were before.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:43 +01:00
Harvey Harrison
85f2adf169 x86: use helper in fault_64.c
Use the fixup_exception() helper in fault_64.c

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:42 +01:00
Glauber de Oliveira Costa
46265df040 x86: move i387 definitions to processor.h
This patch moves i387 definitions from processor_32.h and processor_64.h
to processor.h. They are different. Very different. And there's appearently
nothing we can do about it, so they're enclosed inside ifdefs.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:41 +01:00
Glauber de Oliveira Costa
ea5e3593a4 x86: unify asm nops
There's only one difference between the NOPs used in asm code for i386 and x86_64:
i386 has a lot more variants. The code is moved to processor.h, and adjusted
accordingly.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:40 +01:00
Glauber de Oliveira Costa
ae2e15eb3b x86: unify prefetch operations
This patch moves the prefetch[w]? functions to processor.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:40 +01:00
Glauber de Oliveira Costa
1a53905add x86: move definitions to processor.h
This patch moves definitions that are present in only one of the files
(between processor_32.h and processor_64.h), to processor.h. They're mostly
structures and function definitions.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:39 +01:00
Glauber de Oliveira Costa
fc87e9061a x86: unify mm_segment_t definition
This patch moves the mm_segment_t structure definition to processor.h
This makes mmsegment.h file useless, and it is deleted.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:38 +01:00
Glauber de Oliveira Costa
2c1c468a38 x86: remove legacy stuff from processor_64.h
This patch removes definitions and macros that are not used anymore
from processor_64.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:37 +01:00
Glauber de Oliveira Costa
5300db887e x86: unify x86_cpuinfo struct.
x86_cpuinfo is one more to the family of "not fundamentally different"
structs. It's unified in processor.h, with very specific fields enclosed
around ifdefs.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:33 +01:00
Glauber de Oliveira Costa
26996dd22b x86: change bitwise operations to get a void parameter.
This patch changes the bitwise operations in bitops.h to get
a void pointers as a parameter. Before this patch, a lot of warnings
can be seen. They're gone after it.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:31 +01:00
Glauber de Oliveira Costa
dbcb466024 x86: unify TASK_ALIGN definitions
This patch moves the TASK_ALIGN constraints to common header.
The base of it is the same for x86_64 and i386. The only difference
is the presence of vSMP in x86_64. As it's not a worry in i386, we can
safely use the same code for both.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:31 +01:00
Glauber de Oliveira Costa
cb38d37733 x86: unify thread struct.
The thread_struct is not fundamentally different between architectures, and
this patch puts it in the common header. What's really unique for each of
them is enclosed in ifdefs.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:31 +01:00
Glauber de Oliveira Costa
7818a1e029 x86: provide 64-bit with a load_sp0 function.
Paravirt guests need to inform the underlying hypervisor whenever the sp0
tss field changes. i386 already has such a function, and we use it for
x86_64 too. There's an unnecessary (for 64-bit) msr handling part in the original
version, and it is placed around an ifdef. Making no more sense in
processor_32.h, it is moved to the common header

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:31 +01:00
Glauber de Oliveira Costa
ca241c7503 x86: unify tss_struct
Although slighly different, the tss_struct is very similar in x86_64 and
i386. The really different part, which matchs the hardware vision of it, is
now called x86_hw_tss, and each of the architectures provides yours.
It's then used as a field in the outter tss_struct.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:31 +01:00
Glauber de Oliveira Costa
0ccb8acc51 x86: unify current_text_addr
current_text_addr() has a different implementation in x86_64 and
i386, but it is not fundamentally different. I stick to the i386
implementation, that seem to be a common base, and move it to processor.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
683e0253db x86: unify common parts of processor.h
This patch moves the pieces of processor_32.h and processor_64 that are
equal to processor.h. Only what's exactly the same is moved around, the rest
not being touched.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
62d7d7ed11 x86: move the definition of set_iopl_mask to common header
This patch moves the definition of set_iopl_mask to processor.h,
instead of letting it at processor_32.h.
For x86_64, nothing is done, as we don't really need such a function.
However, having it on both arches saves us from putting an ifdef in the
pv_cpu_ops struct.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
1b46cbe0cc x86: unify paravirt pieces of processor.h
This patch unifies the paravirt pieces of processor.h
The functionality present in 32 bit, but not (yet) in 64-bit,
like load_sp0 is _not_ done here, and let to a different patch.

With this unification, we get paravirt for free in x86_64 processor.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
c72dcf83ff x86: move load_cr3 to a common place.
There are currently two definitions of load_cr3, that essentially do the
same thing. This patch moves them all to processor.h.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
746ff60f26 x86: move desc_empty to where they belong
This patch moves the (duplicated) desc_empty implementation to desc.h,
where the descriptor things belong.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
053de04441 x86: get rid of _MASK flags
There's no need for the *_MASK flags (TF_MASK, IF_MASK, etc), found in
processor.h (both _32 and _64). They have a one-to-one mapping with the
EFLAGS value. This patch removes the definitions, and use the already
existent X86_EFLAGS_ version when applicable.

[ roland@redhat.com: KVM build fixes. ]

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Glauber de Oliveira Costa
73018a66e7 x86: move tsc definitions to were they belong
This patch wipes out the definitions of tsc_disable from processor_32.h
and move it to tsc.h, were it belongs

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:26 +01:00
Harvey Harrison
3c233d1334 x86: unify kexec_{32|64}.h
One section collecting all constant defines.  Ifdef the asm
blocks for X86_32/64.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
2008-01-30 13:31:26 +01:00
Harvey Harrison
01c57fb6a3 x86: local.h fix checkpatch warnings
Mostly space after comma, one space after if.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:26 +01:00
Harvey Harrison
5638f99394 x86: unify local_{32|64}.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:26 +01:00
Harvey Harrison
8ee5797a91 x86: introduce asm helpers in local_{32|64}.h
Handle the use of long on X86_32 and quad on X86_64

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:31:26 +01:00
Harvey Harrison
992b95920a x86: fix asm memory constraints in local_64.h
Use the shorter +m form rather than =m and m.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:26 +01:00
Harvey Harrison
4ad0271834 x86: clean up local_{32|64}.h
Common prefix from both files moved to local.h

Change __inline__ to inline

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:26 +01:00
Cyrill Gorcunov
fe758fb119 x86: clean up include/asm-x86/pda.h
clean up include/asm-x86/pda.h, as suggested by checkpatch.pl.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:25 +01:00
Jan Beulich
ded9aa0db8 x86: also define AT_VECTOR_SIZE_ARCH
The patch introducing this left out x86-64, despite it also having
extra entries.

[ mingo@elte.hu: re-merged this to after the unification patches. ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:24 +01:00
Jan Beulich
e94271017f x86: adjust enable_NMI_through_LVT0()
Its previous use in a call to on_each_cpu() was pointless, as at the
time that code gets executed only one CPU is online. Further, the
function can be __cpuinit, and for this to work without
CONFIG_HOTPLUG_CPU setup_nmi() must also get an attribute (this one
can even be __init; on 64-bits check_timer() also was lacking that
attribute).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:24 +01:00
Jan Beulich
cae4595764 x86: make __{save,restore}_processor_state static
.. allowing to remove their declarations from a global include file
(the symbols don't exist for anything but x86).

Likewise for 64-bits' fix_processor_context(), just that that one was
properly declared in an arch-specific header.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:23 +01:00
Jan Beulich
3e7622f9d7 x86: move to .rodata/.init.data
The array is never written, and on 64-bits it's not even being used
past initial boot.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:23 +01:00
Jan Beulich
22f5991c85 x86-64: honor notify_die() returning NOTIFY_STOP
This requires making die() return a value, making its callers honor
this (and be prepared that it may return), and making oops_end() have
two additional parameters.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:23 +01:00
Jan Beulich
d88879b2d0 x86-64: make pda's cpunumber and nodenumber unsigned
This generally allows better code to be generated, since the zero-
extension during 32-bit operations comes for free (needed when the
result is used as array index or similar), whereas sign extension must
be done explicitly and frequently requires a one byte larger
instruction due to the necessary rex64 prefix.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:21 +01:00
Jan Beulich
bdb4f15606 i386: hard_{en,dis}able_TSC can be static
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:21 +01:00
Masami Hiramatsu
d6be29b871 x86: kprobes code for x86 unification
This patch unifies kprobes code.

- Unify kprobes_*.h to kprobes.h
- Unify kprobes_*.c to kprobes.c
  (Differences are separated by ifdefs)
 - Most differences are related to REX prefix and rip relatives.
 - Two inline assembly code are different.
 - One difference in kprobe_handlre()
 - One fixup exception code is different, but it will be unified
   if mm/extable_*.c are unified.
- Merge history logs into arch/x86/kernel/kprobes.c.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:21 +01:00
Masami Hiramatsu
8533bbe9f8 x86: prepare kprobes code for x86 unification
This patch cleanup kprobes code on x86 for unification.
This patch is based on Arjan's previous work.

- Remove spurious whitespace changes
- Add harmless includes
- Make the 32/64 files more identical
 - Generalize structure fields' and local variable name.
 - Wrap accessing to stack address by macros.
 - Modify bitmap making macro.
 - Merge fixup code into is_riprel() and change its name to fix_riprel().
 - Set MAX_INSN_SIZE to 16 on both arch.
 - Use u32 for bitmaps on both architectures.
 - Clarify some comments.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:21 +01:00
Masami Hiramatsu
aa470140e8 x86: kprobe-booster for x86-64
This patch adds kprobe-booster to kprobes_64.c.

- Changes are based on x86-32.
- Add REX prefix checking code.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:21 +01:00
Nick Piggin
314cdbefd1 x86: FIFO ticket spinlocks
Introduce ticket lock spinlocks for x86 which are FIFO. The implementation
is described in the comments. The straight-line lock/unlock instruction
sequence is slightly slower than the dec based locks on modern x86 CPUs,
however the difference is quite small on Core2 and Opteron when working out of
cache, and becomes almost insignificant even on P4 when the lock misses cache.
trylock is more significantly slower, but they are relatively rare.

On an 8 core (2 socket) Opteron, spinlock unfairness is extremely noticable,
with a userspace test having a difference of up to 2x runtime per thread, and
some threads are starved or "unfairly" granted the lock up to 1 000 000 (!)
times. After this patch, all threads appear to finish at exactly the same
time.

The memory ordering of the lock does conform to x86 standards, and the
implementation has been reviewed by Intel and AMD engineers.

The algorithm also tells us how many CPUs are contending the lock, so
lockbreak becomes trivial and we no longer have to waste 4 bytes per
spinlock for it.

After this, we can no longer spin on any locks with preempt enabled
and cannot reenable interrupts when spinning on an irq safe lock, because
at that point we have already taken a ticket and the would deadlock if
the same CPU tries to take the lock again.  These are questionable anyway:
if the lock happens to be called under a preempt or interrupt disabled section,
then it will just have the same latency problems. The real fix is to keep
critical sections short, and ensure locks are reasonably fair (which this
patch does).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:31:21 +01:00
Nick Piggin
95c354fe9f spinlock: lockbreak cleanup
The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.

Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.

Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:20 +01:00
Markus Metzger
a95d67f87e x86, ptrace: new ptrace BTS API
Here's the new ptrace BTS API that supports two different overflow handling mechanisms (wrap-around and buffer-full-signal) to support two different use cases (debugging and profiling).

It further combines buffer allocation and configuration.

Opens:
- memory rlimit
- overflow signal

What would be the right signal to use?

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:20 +01:00
Markus Metzger
e4811f2568 x86, ptrace: change BTS GET ptrace interface
Change the ptrace interface to mimick an array from newst to oldest.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:20 +01:00
Markus Metzger
3c68904fee x86, ptrace: use jiffies for BTS timestamps
Replace sched_clock() with jiffies for BTS timestamps.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:20 +01:00
Glauber de Oliveira Costa
f6e0eba1b1 x86: avoid ifdefs in desc.h, getting rid of pack_ldt and pack_tss
By Andi Kleen's suggestion, this patch removes pack_ldt() and pack_tss()
wrappers in favour of a general wrapper. It saves us an ifdef and some lines
of code, but more importantly, it's more elegant.

No functional change is made, although the object code is expected to be
different.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:20 +01:00
Huang, Ying
2215e69d2c x86 boot: use E820 memory map on EFI 32 platform
Because the EFI memory map are converted to e820 memory map in bootloader, the
EFI memory map handling code is removed to clean up.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:19 +01:00
Huang, Ying
e429795c68 x86: EFI runtime service support: remove duplicated code from efi_32.c
This patch removes the duplicated code between efi_32.c and efi.c.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:19 +01:00
Huang, Ying
de18c850af x86: EFI runtime service support: EFI runtime services
This patch adds support for several EFI runtime services for EFI x86_64
system.

The EFI support for emergency_restart is added.

Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:19 +01:00
Huang, Ying
5b83683f32 x86: EFI runtime service support
This patch adds basic runtime services support for EFI x86_64 system.  The
main file of the patch is the addition of efi_64.c for x86_64.  This file is
modeled after the EFI IA32 avatar.  EFI runtime services initialization are
implemented in efi_64.c.  Some x86_64 specifics are worth noting here.  On
x86_64, parameters passed to EFI firmware services need to follow the EFI
calling convention.  For this purpose, a set of functions named efi_call<x>
(<x> is the number of parameters) are implemented.  EFI function calls are
wrapped before calling the firmware service.  The duplicated code between
efi_32.c and efi_64.c is placed in efi.c to remove them from efi_32.c.

Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:19 +01:00
Ingo Molnar
5f561d3be8 x86: dummy placeholder for acpi/reboot.h
dummy placeholder for acpi/reboot.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:17 +01:00
Jeff Dike
634e49723b uml: add asm-um/asm.h
git-x86.patch introduces asm-x86/asm.h.  UML needs to follow this with
an asm/asm.h of its own.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:17 +01:00
Andrew Morton
1e160cc3f3 x86: __vdso_getcpu() warning fix
arch/x86/vdso/vgetcpu.c: In function '__vdso_getcpu':
arch/x86/vdso/vgetcpu.c:22: warning: pointer targets in passing argument 1 of 'native_read_tscp' differ in signedness

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:17 +01:00
Harvey Harrison
341d8854d3 x86: remove fastcall from include/asm-x86
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:17 +01:00
Harvey Harrison
56c4da454d core: remove last users of empty FASTCALL macro
FASTCALL is always empty after the x86 removal.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:17 +01:00
Harvey Harrison
332540d5fe UML: remove remaining FASTCALL uses
With the x86 removal, FASTCALL is always empty now.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:14 +01:00
Glauber de Oliveira Costa
c81c6ca45a x86: unify set_tss_desc
This patch unifies the set_tss_desc between i386 and x86_64,
which can now have a common implementation. After the old
functions are removed from desc_{32,64}.h, nothing important is
left, and the files can be removed.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:14 +01:00
Glauber de Oliveira Costa
507f90c9f9 x86: move _set_gate and its users to a common location
This patch moves _set_gate and its users to desc.h. We can now
use common code for x86_64 and i386.

[ mingo@elte.hu: set_system_gate() fixes for nasty crashes. ]

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:14 +01:00
Glauber de Oliveira Costa
54cd0eac72 x86: unify paravirt pieces of descriptor handling
With the types used to access descriptors in x86_64 and i386
now being the same, the code that effectively handles them can
now be easily shared. This patch moves the paravirt part of
desc_32.h into desc.h, and then, we get paravirt support in x86_64
for free.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:14 +01:00
Glauber de Oliveira Costa
cc6978528c x86: modify get_desc_base
This patch makes get_desc_base() receive a struct desc_struct,
and then uses its internal fields to compute the base address.
This is done at both i386 and x86_64, and then it is moved
to common header

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:14 +01:00
Glauber de Oliveira Costa
26048d75e8 x86: use the same data type for tls_array.
This patch changes the type of tls_array in x86_64 to
a desc_struct. Now, both i386 and x86_64 tls_array have
the same type, and code accessing it can be shared.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:14 +01:00