forked from Minki/linux
1bf6ece573
21984 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ram Pai
|
ea5f95c3d6 |
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
In some cases, a pkey's bits need not necessarily change in a way that the value of the pkey register increases when performing a pkey_disable_set() or decreases when performing a pkey_disable_clear(). For example, on powerpc, if a pkey's current state is PKEY_DISABLE_ACCESS and we perform a pkey_write_disable() on it, the bits still remain the same. We will observe something similar when the pkey's current state is 0 and a pkey_access_enable() is performed on it. Either case would cause some assertions to fail. This fixes the problem. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/8240665131e43fc93eed4eea8194676c1ea39a7f.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ram Pai
|
11551801a7 |
selftests/vm/pkeys: fix pkey_disable_clear()
Currently, pkey_disable_clear() sets the specified bits instead clearing them. This has been dead code up to now because its only callers i.e. pkey_access/write_allow() are also unused. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/1f70bca60330a85dca42c3cd98212bb1cdf5a076.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sandipan Das
|
0c416bcaef |
selftests: vm: pkeys: add helpers for pkey bits
This introduces some functions that help with setting or clearing bits of a particular pkey. This also adds an abstraction for getting a pkey's bit position in the pkey register as this may vary across architectures. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/2ad9705f4f68ca7e72155cc583415e5a979546f1.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Sandipan Das
|
4dbdd947cb |
selftests: vm: pkeys: Use sane types for pkey register
The size of the pkey register can vary across architectures. This converts the data type of all its references to u64 in preparation for multi-arch support. To keep the definition of the u64 type consistent and remove format specifier related warnings, __SANE_USERSPACE_TYPES__ is defined as suggested by Michael Ellerman. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/d3e271798455d940e395e56e1ff1e82a31bcb7aa.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Thiago Jung Bauermann
|
a09160e694 |
selftests/vm/pkeys: make gcc check arguments of sigsafe_printf()
This will help us ensure we print pkey_reg_t values correctly in different architectures. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/b40b7a95fdd4045d62530a2a34452934caf3b0bc.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Thiago Jung Bauermann
|
53555e2b4d |
selftests/vm/pkeys: move some definitions to arch-specific header
In preparation for multi-arch support, move definitions which have arch-specific values to x86-specific header. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/d58eba2930059c8b209eefd6d5b48fe922a5b010.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ram Pai
|
5461c6625f |
selftests/vm/pkeys: move generic definitions to header file
Moved all the generic definition and helper functions to the header file. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/57177f99e92a51295956715d5f2d5688a4d13927.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ram Pai
|
c4273c7f0e |
selftests/vm/pkeys: rename all references to pkru to a generic name
This renames PKRU references to "pkey_reg" or "pkey" based on the usage. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/2c6970bc6d2e99796cd5cc1101bd2ecf7eccb937.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ram Pai
|
804eb64615 |
selftests/x86/pkeys: move selftests to arch-neutral directory
Patch series "selftests, powerpc, x86: Memory Protection Keys", v19. Memory protection keys enables an application to protect its address space from inadvertent access by its own code. This feature is now enabled on powerpc and has been available since 4.16-rc1. The patches move the selftests to arch neutral directory and enhance their test coverage. Tested on powerpc64 and x86_64 (Skylake-SP). This patch (of 24): Move selftest files from tools/testing/selftests/x86/ to tools/testing/selftests/vm/. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/14d25194c3e2e652e0047feec4487e269e76e8c9.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jesse Brandeburg
|
c348c16305 |
lib: make a test module with set/clear bit
Test some bit clears/sets to make sure assembly doesn't change, and that the set_bit and clear_bit functions work and don't cause sparse warnings. Instruct Kbuild to build this file with extra warning level -Wextra, to catch new issues, and also doesn't hurt to build with C=1. This was used to test changes to arch/x86/include/asm/bitops.h. In particular, sparse (C=1) was very concerned when the last bit before a natural boundary, like 7, or 31, was being tested, as this causes sign extension (0xffffff7f) for instance when clearing bit 7. Recommended usage: make defconfig scripts/config -m CONFIG_TEST_BITOPS make modules_prepare make C=1 W=1 lib/test_bitops.ko objdump -S -d lib/test_bitops.ko insmod lib/test_bitops.ko rmmod lib/test_bitops.ko <check dmesg>, there should be no compiler/sparse warnings and no error messages in log. Link: http://lkml.kernel.org/r/20200310221747.2848474-2-jesse.brandeburg@intel.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> CcL Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
15a2bc4dbb |
Merge branch 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve updates from Eric Biederman: "Last cycle for the Nth time I ran into bugs and quality of implementation issues related to exec that could not be easily be fixed because of the way exec is implemented. So I have been digging into exec and cleanup up what I can. I don't think I have exec sorted out enough to fix the issues I started with but I have made some headway this cycle with 4 sets of changes. - promised cleanups after introducing exec_update_mutex - trivial cleanups for exec - control flow simplifications - remove the recomputation of bprm->cred The net result is code that is a bit easier to understand and work with and a decrease in the number of lines of code (if you don't count the added tests)" * 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (24 commits) exec: Compute file based creds only once exec: Add a per bprm->file version of per_clear binfmt_elf_fdpic: fix execfd build regression selftests/exec: Add binfmt_script regression test exec: Remove recursion from search_binary_handler exec: Generic execfd support exec/binfmt_script: Don't modify bprm->buf and then return -ENOEXEC exec: Move the call of prepare_binprm into search_binary_handler exec: Allow load_misc_binary to call prepare_binprm unconditionally exec: Convert security_bprm_set_creds into security_bprm_repopulate_creds exec: Factor security_bprm_creds_for_exec out of security_bprm_set_creds exec: Teach prepare_exec_creds how exec treats uids & gids exec: Set the point of no return sooner exec: Move handling of the point of no return to the top level exec: Run sync_mm_rss before taking exec_update_mutex exec: Fix spelling of search_binary_handler in a comment exec: Move the comment from above de_thread to above unshare_sighand exec: Rename flush_old_exec begin_new_exec exec: Move most of setup_new_exec into flush_old_exec exec: In setup_new_exec cache current in the local variable me ... |
||
|
Linus Torvalds
|
9ff7258575 |
Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull proc updates from Eric Biederman: "This has four sets of changes: - modernize proc to support multiple private instances - ensure we see the exit of each process tid exactly - remove has_group_leader_pid - use pids not tasks in posix-cpu-timers lookup Alexey updated proc so each mount of proc uses a new superblock. This allows people to actually use mount options with proc with no fear of messing up another mount of proc. Given the kernel's internal mounts of proc for things like uml this was a real problem, and resulted in Android's hidepid mount options being ignored and introducing security issues. The rest of the changes are small cleanups and fixes that came out of my work to allow this change to proc. In essence it is swapping the pids in de_thread during exec which removes a special case the code had to handle. Then updating the code to stop handling that special case" * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: proc_pid_ns takes super_block as an argument remove the no longer needed pid_alive() check in __task_pid_nr_ns() posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type posix-cpu-timers: Extend rcu_read_lock removing task_struct references signal: Remove has_group_leader_pid exec: Remove BUG_ON(has_group_leader_pid) posix-cpu-timer: Unify the now redundant code in lookup_task posix-cpu-timer: Tidy up group_leader logic in lookup_task proc: Ensure we see the exit of each process tid exactly once rculist: Add hlists_swap_heads_rcu proc: Use PIDTYPE_TGID in next_tgid Use proc_pid_ns() to get pid_namespace from the proc superblock proc: use named enums for better readability proc: use human-readable values for hidepid docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior proc: add option to mount only a pids subset proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option proc: allow to mount many instances of proc in one pid namespace proc: rename struct proc_fs_info to proc_fs_opts |
||
|
Linus Torvalds
|
38b3a5aaf2 |
perf tools for v5.8:
- Further Intel PT call-trace fixes
- Improve SELinux docs and tool warnings
- Fix race at exit in 'perf record' using eventfd.
- Add missing build tests to the default set of 'make -C tools/perf build-test'
- Sync msr-index.h getting new AMD MSRs to decode and filter in 'perf trace'.
- Fix fallback to libaudit in 'perf trace' for arches not using per-arch *.tbl files.
- Fixes for 'perf ftrace'.
- Fixes and improvements for the 'perf stat' metrics.
- Use dummy event to get PERF_RECORD_{FORK,MMAP,etc} while synthesizing
those metadata events for pre-existing threads.
- Fix leaks detected using clang tooling.
- Improvements to PMU event metric testing.
- Report summary for 'perf stat' interval mode at the end, summing up
all the intervals.
- Improve pipe mode, i.e. this now works as expected, continuously
dumping samples:
# perf record -g -e raw_syscalls:sys_enter | perf --no-pager script
- Fixes for event grouping, detecting incompatible groups such as:
# perf stat -e '{cycles,power/energy-cores/}' -v
WARNING: group events cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
power/energy-cores/: 0
cycles: 0-7
- Fixes for 'perf probe': blacklist address checking, number of
kretprobe instances, etc.
- JIT processing improvements and fixes plus the addition of a 'perf
test' entry for the java demangler.
- Add support for synthesizing first/last level cache, TLB and remove
access events from HW tracing in the auxtrace code, first to use is
ARM SPE.
- Vendor events updates and fixes, including for POWER9 and Intel.
- Allow using ~/.perfconfig for removing the ',' separators in 'perf
stat' output.
- Opt-in support for libpfm4.
=================================================================================
Adrian Hunter (8):
perf intel-pt: Use allocated branch stack for PEBS sample
perf symbols: Fix debuginfo search for Ubuntu
perf kcore_copy: Fix module map when there are no modules loaded
perf evlist: Disable 'immediate' events last
perf script: Fix --call-trace for Intel PT
perf record: Respect --no-switch-events
perf intel-pt: Refine kernel decoding only warning message
perf symbols: Fix kernel maps for kcore and eBPF
Alexey Budankov (3):
perf docs: Extend CAP_SYS_ADMIN with CAP_PERFMON where needed
perf tool: Make perf tool aware of SELinux access control
perf docs: Introduce security.txt file to document related issues
Anand K Mistry (1):
perf record: Use an eventfd to wakeup when done
Andi Kleen (1):
perf script: Don't force less for non tty output with --xed
Arnaldo Carvalho de Melo (21):
perf evsel: Rename perf_evsel__object_config() to evsel__object_config()
perf evsel: Rename perf_evsel__resort*() to evsel__resort*()
perf evsel: Rename perf_evsel__fprintf() to evsel__fprintf()
perf evsel: Rename *perf_evsel__get_config_term() & friends to evsel__env()
perf evsel: Rename perf_evsel__new*() to evsel__new*()
perf evsel: Rename perf_evsel__[hs]w_cache* to evsel__[hs]w_cache*
perf counts: Rename perf_evsel__*counts() to evsel__*counts()
perf parse-events: Fix incorrect conversion of 'if () free()' to 'zfree()'
perf evsel: Initialize evsel->per_pkg_mask to NULL in evsel__init()
tools feature: Rename HAVE_EVENTFD to HAVE_EVENTFD_SUPPORT
perf build: Group the NO_SYSCALL_TABLE logic
perf build: Allow explicitely disabling the NO_SYSCALL_TABLE variable
perf trace: Remove union from syscalltbl, all the fields are needed
perf trace: Use zalloc() to make sure all fields are zeroed in the syscalltbl constructor
perf trace: Grow the syscall table as needed when using libaudit
perf build: Remove libaudit from the default feature checks
perf build: Add NO_SYSCALL_TABLE=1 to the build tests
perf build: Add NO_LIBCRYPTO=1 to the default set of build tests
perf build: Add NO_SDT=1 to the default set of build tests
perf build: Add a LIBPFM4=1 build test entry
tools arch x86: Sync the msr-index.h copy with the kernel sources
Changbin Du (2):
perf ftrace: Trace system wide if no target is given
perf ftrace: Detect workload failure
Ed Maste (1):
perf tools: Correct license on jsmn JSON parser
Gustavo A. R. Silva (2):
perf tools: Replace zero-length array with flexible-array
perf branch: Replace zero-length array with flexible-array
Ian Rogers (38):
perf expr: Allow for unlimited escaped characters in a symbol
perf metrics: Fix parse errors in cascade lake metrics
perf metrics: Fix parse errors in skylake metrics
perf expr: Allow ',' to be an other token
perf expr: Increase max other
perf expr: Parse numbers as doubles
perf expr: Debug lex if debugging yacc
perf metrics: Fix parse errors in power8 metrics
perf metrics: Fix parse errors in power9 metrics
perf expr: Print a debug message for division by zero
perf evsel: Dummy events never triggers, no need to ask for PERF_SAMPLE_BRANCH_STACK
perf record: Add dummy event during system wide synthesis
perf c2c: Fix 'perf c2c record -e list' to show the default events used
perf evsel: Fix 2 memory leaks
perf expr: Test parsing of floating point numbers
perf expr: Fix memory leaks in metric bison
perf parse-events: Make add PMU verbose output clearer
perf test: Provide a subtest callback to ask for the reason for skipping a subtest
perf test: Improve pmu event metric testing
perf trace: Fix the selection for architectures to generate the errno name tables
perf beauty: Allow the CC used in the arch errno names script to acccept CFLAGS
perf tools: Grab a copy of libbpf's hashmap
perf expr: Migrate expr ids table to a hashmap
perf metricgroup: Make 'evlist_used' variable a bitmap instead of array of bools
perf expr: Allow numbers to be followed by a dot
perf metricgroup: Free metric_events on error
perf metricgroup: Always place duration_time last
perf metricgroup: Use early return in add_metric
perf metricgroup: Delay events string creation
perf metricgroup: Order event groups by size
perf metricgroup: Remove duped metric group events
perf metricgroup: Add options to not group or merge
perf metricgroup: Remove unnecessary ',' from events
perf list: Add metrics to command line usage
tools compiler.h: Add attribute to disable tail calls
perf tests: Don't tail call optimize in unwind test
perf test: Initialize memory in dwarf-unwind
perf libdw: Fix off-by 1 relative directory includes
Jin Yao (6):
perf parse-events: Use strcmp() to compare the PMU name
perf stat: Fix wrong per-thread runtime stat for interval mode
perf counts: Reset prev_raw_counts counts
perf stat: Copy counts from prev_raw_counts to evsel->counts
perf stat: Save aggr value to first member of prev_raw_counts
perf stat: Report summary for interval mode
Jiri Olsa (13):
perf tools: Do not display extra info when there is nothing to build
perf tools: Do not seek in pipe fd during tracing data processing
perf session: Try to read pipe data from file
perf callchain: Setup callchain properly in pipe mode
perf script: Enable IP fields for callchains
perf tools: Fix is_bpf_image function logic
perf trace: Fix compilation error for make NO_LIBBPF=1 DEBUG=1
perf stat: Fix duration_time value for higher intervals
perf stat: Fail on extra comma while parsing events
perf tests: Consider subtests when searching for user specified tests
perf stat: Do not pass avg to generic_metric
perf parse: Add 'struct parse_events_state' pointer to scanner
perf stat: Ensure group is defined on top of the same cpu mask
Li Bin (1):
perf util: Fix potential SEGFAULT in put_tracepoints_path error path
Masami Hiramatsu (4):
perf probe: Accept the instance number of kretprobe event
perf probe: Fix to check blacklist address correctly
perf probe: Check address correctness by map instead of _etext
perf probe: Do not show the skipped events
Nick Gasson (6):
perf jvmti: Fix jitdump for methods without debug info
perf jvmti: Do not report error when missing debug information
perf tests: Add test for the java demangler
perf jvmti: Fix demangling Java symbols
perf jvmti: Remove redundant jitdump line table entries
perf jit: Fix inaccurate DWARF line table
Paul A. Clarke (5):
perf stat: Increase perf metric output resolution
perf vendor events power9: Add missing metrics to POWER9 'cpi_breakdown'
perf stat: POWER9 metrics: expand "ICT" acronym
perf script: Better align register values in dump
perf config: Add stat.big-num support
Ravi Bangoria (1):
perf powerpc: Don't ignore sym-handling.c file
Stephane Eranian (1):
perf tools: Add optional support for libpfm4
Tan Xiaojun (3):
perf tools: Move arm-spe-pkt-decoder.h/c to the new dir
perf auxtrace: Add four itrace options
perf arm-spe: Support synthetic events
Tiezhu Yang (1):
perf tools: Remove some duplicated includes
Wang ShaoBo (1):
perf bpf-loader: Add missing '*' for key_scan_pos
Xie XiuQi (1):
perf util: Fix memory leak of prefix_if_not_in
=================================================================================
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
Ubuntu 19.10 is failing when linking against libllvm, which isn't the default,
needs to be investigated, haven't tested with CC=gcc, but should be the same
problem:
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
...
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_ignoringImpCasts0Matcher::matches(clang::Expr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x43): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasLoopVariable0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
...
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.7.0-rc7.tar.xz
# time dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:5 : Ok gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
19 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
20 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
21 centos:8 : Ok gcc (GCC) 8.3.1 20190507 (Red Hat 8.3.1-4), clang version 8.0.1 (Red Hat 8.0.1-1.module_el8.1.0+215+a01033fb)
22 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 9.3.1 20200501 releases/gcc-9.3.0-196-gcb2c76c8b1, clang version 10.0.0
23 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
24 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
25 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
26 debian:experimental : FAIL gcc (Debian 9.3.0-13) 9.3.0, clang version 9.0.1-12
27 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
28 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
29 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
30 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
31 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
32 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
33 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
34 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
35 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
36 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
37 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
38 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
39 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
40 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
41 fedora:30 : Ok gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
42 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
44 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
45 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-1.fc32)
46 fedora:rawhide : Ok gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8), clang version 10.0.0 (Fedora 10.0.0-0.3.rc2.fc33)
47 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.2.0-r2 p3) 9.2.0
48 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
49 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
50 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
51 manjaro:latest : Ok gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
52 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
53 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
54 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
55 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
56 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
57 opensuse:tumbleweed : Ok gcc (SUSE Linux) 9.3.1 20200406 [revision 6db837a5288ee3ca5ec504fbd5a765817e556ac2], clang version 10.0.0
58 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
59 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
60 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
61 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
62 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
63 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
64 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
70 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
71 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
76 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
79 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
80 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
81 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
82 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
83 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
86 ubuntu:19.10 : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
87 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
It builds ok with the default set of options.
The "7: Simple expression parser" entry is failing due to a bug in the
hashmap in libbpf that will hit upstream via the bpf tree.
# uname -a
Linux five 5.5.17-200.fc31.x86_64 #1 SMP Mon Apr 13 15:29:42 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
|
||
|
Linus Torvalds
|
ee01c4d72a |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "More mm/ work, plenty more to come Subsystems affected by this patch series: slub, memcg, gup, kasan, pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs, thp, mmap, kconfig" * akpm: (131 commits) arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined riscv: support DEBUG_WX mm: add DEBUG_WX support drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid() powerpc/mm: drop platform defined pmd_mknotpresent() mm: thp: don't need to drain lru cache when splitting and mlocking THP hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs sparc32: register memory occupied by kernel as memblock.memory include/linux/memblock.h: fix minor typo and unclear comment mm, mempolicy: fix up gup usage in lookup_node tools/vm/page_owner_sort.c: filter out unneeded line mm: swap: memcg: fix memcg stats for huge pages mm: swap: fix vmstats for huge pages mm: vmscan: limit the range of LRU type balancing mm: vmscan: reclaim writepage is IO cost mm: vmscan: determine anon/file pressure balance at the reclaim root mm: balance LRU lists based on relative thrashing mm: only count actual rotations as LRU reclaim cost ... |
||
Changhee Han
|
5b94ce2fca |
tools/vm/page_owner_sort.c: filter out unneeded line
To see a sorted result from page_owner, there must be a tiresome preprocessing step before running page_owner_sort. This patch simply filters out lines which start with "PFN" while reading the page owner report. Signed-off-by: Changhee Han <ch0.han@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/20200429052940.16968-1-ch0.han@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kirill A. Shutemov
|
71a2c112a0 |
khugepaged: introduce 'max_ptes_shared' tunable
'max_ptes_shared' specifies how many pages can be shared across multiple processes. Exceeding the number would block the collapse:: /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_shared A higher value may increase memory footprint for some workloads. By default, at least half of pages has to be not shared. [colin.king@canonical.com: fix several spelling mistakes] Link: http://lkml.kernel.org/r/20200420084241.65433-1-colin.king@canonical.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Link: http://lkml.kernel.org/r/20200416160026.16538-9-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kirill A. Shutemov
|
e0c13f9761 |
khugepaged: add self test
Patch series "thp/khugepaged improvements and CoW semantics", v4. The patchset adds khugepaged selftest (anon-THP only for now), expands cases khugepaged can handle and switches anon-THP copy-on-write handling to 4k. This patch (of 8): The test checks if khugepaged is able to recover huge page where we expect to do so. It only covers anon-THP for now. Currently the test shows few failures. They are going to be addressed by the following patches. [colin.king@canonical.com: fix several spelling mistakes] Link: http://lkml.kernel.org/r/20200420084241.65433-1-colin.king@canonical.com [aneesh.kumar@linux.ibm.com: replace the usage of system(3) in the test] Link: http://lkml.kernel.org/r/20200429110727.89388-1-aneesh.kumar@linux.ibm.com [kirill@shutemov.name: fixup for issues I've noticed] Link: http://lkml.kernel.org/r/20200429124816.jp272trghrzxx5j5@box [jhubbard@nvidia.com: add khugepaged to .gitignore] Link: http://lkml.kernel.org/r/20200517002509.362401-1-jhubbard@nvidia.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Link: http://lkml.kernel.org/r/20200416160026.16538-1-kirill.shutemov@linux.intel.com Link: http://lkml.kernel.org/r/20200416160026.16538-2-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
cb8e59cc87 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
||
|
Linus Torvalds
|
039aeb9deb |
ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
|
||
|
Linus Torvalds
|
e7c93cbfe9 |
threads-v5.8
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXtYhfgAKCRCRxhvAZXjc
oghSAP9uVX3vxYtEtNvu9WtEn1uYZcSKZoF1YrcgY7UfSmna0gEAruzyZcai4CJL
WKv+4aRq2oYk+hsqZDycAxIsEgWvNg8=
=ZWj3
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"We have been discussing using pidfds to attach to namespaces for quite
a while and the patches have in one form or another already existed
for about a year. But I wanted to wait to see how the general api
would be received and adopted.
This contains the changes to make it possible to use pidfds to attach
to the namespaces of a process, i.e. they can be passed as the first
argument to the setns() syscall.
When only a single namespace type is specified the semantics are
equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET)
equals setns(pidfd, CLONE_NEWNET).
However, when a pidfd is passed, multiple namespace flags can be
specified in the second setns() argument and setns() will attach the
caller to all the specified namespaces all at once or to none of them.
Specifying 0 is not valid together with a pidfd. Here are just two
obvious examples:
setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
setns(pidfd, CLONE_NEWUSER);
Allowing to also attach subsets of namespaces supports various
use-cases where callers setns to a subset of namespaces to retain
privilege, perform an action and then re-attach another subset of
namespaces.
Apart from significantly reducing the number of syscalls needed to
attach to all currently supported namespaces (eight "open+setns"
sequences vs just a single "setns()"), this also allows atomic setns
to a set of namespaces, i.e. either attaching to all namespaces
succeeds or we fail without having changed anything.
This is centered around a new internal struct nsset which holds all
information necessary for a task to switch to a new set of namespaces
atomically. Fwiw, with this change a pidfd becomes the only token
needed to interact with a container. I'm expecting this to be
picked-up by util-linux for nsenter rather soon.
Associated with this change is a shiny new test-suite dedicated to
setns() (for pidfds and nsfds alike)"
* tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/pidfd: add pidfd setns tests
nsproxy: attach to namespaces via pidfds
nsproxy: add struct nsset
|
||
Thadeu Lima de Souza Cascardo
|
065fcfd497 |
selftests: net: ip_defrag: ignore EPERM
When running with conntrack rules, the dropped overlap fragments may cause EPERM to be returned to sendto. Instead of completely failing, just ignore those errors and continue. If this causes packets with overlap fragments to be dropped as expected, that is okay. And if it causes packets that are expected to be received to be dropped, which should not happen, it will be detected as failure. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
750a02ab8d |
for-5.8/block-2020-06-01
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl7VOwMQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpoR7EADAlz3TCkb4wwuHytTBDrm6gVDdsJ9zUfQW Cl2ASLtufA8PWZUCEI3vhFyOe6P5e+ZZ0O2HjljSevmHyogCaRYXFYVfbWKcQKuk AcxiTgnYNevh8KbGLfJY1WL4eXsY+C3QUGivg35cCgrx+kr9oDaHMeqA9Tm1plyM FSprDBoSmHPqRxiV/1gnr8uXLX6K7i/fHzwmKgySMhavum7Ma8W3wdAGebzvQwrO SbFSuJVgz06e4B1Fzr/wSvVNUE/qW/KqfGuQKIp7VQFIywbgG7TgRMHjE1FSnpnh gn+BfL+O5gc0sTvcOTGOE0SRWWwLx961WNg8Azq08l3fzsxLA6h8/AnoDf3i+QMA rHmLpWZIic2xPSvjaFHX3/V9ITyGYeAMpAR77EL+4ivWrKv5JrBhnSLDt1fKILdg 5elxm7RDI+C4nCP4xuTlVCy5gCd6gwjgytKj+NUWhNq1WiGAD0B54SSiV+SbCSH6 Om2f5trcxz8E4pqWcf0k3LjFapVKRNV8v/+TmVkCdRPBl3y9P0h0wFTkkcEquqnJ y7Yq6efdWviRCnX5w/r/yj0qBuk4xo5hMVsPmlthCWtnBm+xZQ6LwMRcq4HQgZgR 2SYNscZ3OFMekHssH7DvY4DAy1J+n83ims+KzbScbLg2zCZjh/scQuv38R5Eh9WZ rCS8c+T7Ig== =HYf4 -----END PGP SIGNATURE----- Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ... |
||
|
Linus Torvalds
|
cfa3b8068b |
hmm related patches for 5.8
This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification for
hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality
-----BEGIN PGP SIGNATURE-----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=twev
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification
for hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: add HMM selftests
mm/hmm/test: add selftests for HMM
mm/hmm/test: add selftest driver for HMM
mm/hmm: remove the customizable pfn format from hmm_range_fault
mm/hmm: remove HMM_PFN_SPECIAL
drm/amdgpu: remove dead code after hmm_range_fault()
mm/hmm: make hmm_range_fault return 0 or -1
|
||
|
Linus Torvalds
|
355ba37d75 |
Power management updates for 5.8-rc1
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
|
||
Ilya Leoshkevich
|
e7ad28e6fd |
selftests/bpf: Add a default $(CXX) value
When using make kselftest TARGETS=bpf, tools/bpf is built with MAKEFLAGS=rR, which causes $(CXX) to be undefined, which in turn causes the build to fail with CXX test_cpp /bin/sh: 2: g: not found Fix by adding a default $(CXX) value, like tools/build/feature/Makefile already does. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200602175649.2501580-3-iii@linux.ibm.com |
||
|
Ilya Leoshkevich
|
d70a6be1e2 |
tools/bpf: Don't use $(COMPILE.c)
When using make kselftest TARGETS=bpf, tools/bpf is built with MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn causes the build to fail with CC kselftest/bpf/tools/build/bpftool/map_perf_ring.o /bin/sh: 1: -MMD: not found Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200602175649.2501580-2-iii@linux.ibm.com |
||
|
Linus Torvalds
|
a5a82e0a59 |
platform-drivers-x86 for v5.8-1
* Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
* ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA, T200TA
* Big refactoring of Intel SCU driver with Elkhart Lake support has been added
* Slim Bootloarder firmware update signaling WMI driver has been added
* Thinkpad ACPI driver can handle dual fan configuration on new P and X models
* Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
* Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet models
* Intel Speed Select tools update
* Plenty of small cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- replace space by * in modalias
New drivers:
- Add Elkhart Lake SCU/PMC support
- Add Slim Bootloader firmware update signaling driver
asus-laptop:
- Drop duplicate check for led_classdev_unregister()
asus-nb-wmi:
- Revert "Do not load on Asus T100TA and T200TA"
- Do not load on Asus T100TA and T200TA
asus-wmi:
- Ignore WMI events with code 0x79
- Add support for SW_TABLET_MODE
- Move asus_wmi_input_init and _exit lower in the file
- Drop duplicate check for led_classdev_unregister()
- Reserve more space for struct bias_args
- remove redundant initialization of variable status
dcdbas:
- Check SMBIOS for protected buffer address
dell-laptop:
- don't register micmute LED if there is no token
dell-wmi:
- Ignore keyboard attached / detached events
device property:
- export set_secondary_fwnode() to modules
eeepc-laptop:
- Drop duplicate check for led_classdev_unregister()
hp-wmi:
- Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
- Convert simple_strtoul() to kstrtou32()
- Refactor postcode_store() to follow standard patterns
intel_cht_int33fe:
- Fix spelling issues
- Switch to use acpi_dev_hid_uid_match()
- Convert to use set_secondary_fwnode()
- Convert software node array to group
intel-hid:
- Add a quirk to support HP Spectre X2 (2015)
intel_mid_powerbtn:
- Convert to use new SCU IPC API
intel_pmc_core:
- avoid unused-function warnings
- Change Jasper Lake S0ix debug reg map back to ICL
intel_pmc_ipc:
- Convert to MFD
- Move PCI IDs to intel_scu_pcidrv.c
- Drop intel_pmc_ipc_command()
- Start using SCU IPC
intel_scu_ipc:
- Add managed function to register SCU IPC
- Introduce new SCU IPC API
- Move legacy SCU IPC API to a separate header
- Log more information if SCU IPC command fails
- Split out SCU IPC functionality from the SCU driver
intel_scu_ipcutil:
- Convert to use new SCU IPC API
intel-speed-select:
- Fix speed-select-base-freq-properties output on CLX-N
intel_telemetry:
- Add telemetry_get_pltdata()
- Convert to use new SCU IPC API
intel-vbtn:
- Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
- Detect switch position before registering the input-device
- Move detect_tablet_mode() to higher in the file
- Fix probe failure on devices with only switches
- Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types
- Do not advertise switches to userspace if they are not there
- Split keymap into buttons and switches parts
- Use acpi_evaluate_integer()
ISST:
- Increase timeout
lg-laptop:
- Drop duplicate check for led_classdev_unregister()
MAINTAINERS:
- Add me as maintainer of Intel SCU drivers
- Update entry for Intel Broxton PMC driver
Merges of immutable branches:
- Merge branch 'for-next'
- Merge branch 'ib-mfd-x86-usb-watchdog-v5.7'
- Merge branch 'ib-pdx86-properties'
mfd:
- intel_soc_pmic_mrfld: Convert to use new SCU IPC API
- intel_soc_pmic_bxtwc: Convert to use new SCU IPC API
- intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic
samsung-laptop:
- Drop duplicate check for led_classdev_unregister()
software node:
- Allow register and unregister software node groups
sony-laptop:
- Make resuming thermal profile safer
- SNC calls should handle BUFFER types
thinkpad_acpi:
- Replace custom approach by kstrtoint()
- Use strndup_user() in dispatch_proc_write()
- Replace next_cmd(&buf) with strsep(&buf, ",")
- Drop duplicate check for led_classdev_unregister()
- Remove always false 'value < 0' statement
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- Fix invalid core mask
- Increase CPU count
- Fix json perf-profile output output
- Update version
- Enable clos for turbo-freq enable
- Fix CLX-N package information output
- Check support status before enable
- Change debug to error
toshiba_acpi:
- Drop duplicate check for led_classdev_unregister()
touchscreen_dmi:
- Update Trekstor Twin 10.1 entry
- Add info for the Trekstor Yourbook C11B
- Drop comma in terminator line
- add Vinga J116 touchscreen
- Add info for the ONDA V891 v5 tablet
- Add touchscreen info for techBite Arc 11.6.
- Add info for the MP-man MPWIN895CL tablet
usb:
- typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API
watchdog:
- iTCO: fix link error
- intel-mid_wdt: Convert to use new SCU IPC API
wmi:
- Describe function parameters
- Fix indentation in some cases
- Replace UUID redefinitions by their originals
x86/platform/intel-mid:
- Add empty stubs for intel_scu_devices_[create|destroy]()
-----BEGIN PGP SIGNATURE-----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=pprB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
- ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
T200TA
- Big refactoring of Intel SCU driver with Elkhart Lake support has
been added
- Slim Bootloarder firmware update signaling WMI driver has been added
- Thinkpad ACPI driver can handle dual fan configuration on new P and X
models
- Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
- Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
models
- Intel Speed Select tools update
- Plenty of small cleanups here and there
* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
platform/x86: dcdbas: Check SMBIOS for protected buffer address
platform/x86: asus_wmi: Reserve more space for struct bias_args
platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
platform/x86: acerhdf: replace space by * in modalias
platform/x86: ISST: Increase timeout
tools/power/x86/intel-speed-select: Fix invalid core mask
tools/power/x86/intel-speed-select: Increase CPU count
tools/power/x86/intel-speed-select: Fix json perf-profile output output
platform/x86: dell-wmi: Ignore keyboard attached / detached events
platform/x86: dell-laptop: don't register micmute LED if there is no token
platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
platform/x86: intel-vbtn: Detect switch position before registering the input-device
...
|
||
|
Ilya Leoshkevich
|
9bc499befe |
bpf, selftests: Use bpf_probe_read_kernel
Since commit
|
||
Alexei Starovoitov
|
7cec0b9271 |
selftests/bpf: Fix verifier test
Adjust verifier test due to addition of new field.
Fixes:
|
||
Andrii Nakryiko
|
9a5f25ad30 |
selftests/bpf: Fix sample_cnt shared between two threads
Make sample_cnt volatile to fix possible selftests failure due to compiler
optimization preventing latest sample_cnt value to be visible to main thread.
sample_cnt is incremented in background thread, which is then joined into main
thread. So in terms of visibility sample_cnt update is ok. But because it's
not volatile, compiler might make optimizations that would prevent main thread
to see latest updated value. Fix this by marking global variable volatile.
Fixes:
|
||
Daniel Borkmann
|
c4ba153b65 |
bpf, selftests: Adapt cls_redirect to call csum_level helper
Adapt bpf_skb_adjust_room() to pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET flag and use the new bpf_csum_level() helper to inc/dec the checksum level by one after the encap/decap. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/e7458f10e3f3d795307cbc5ad870112671d9c6f7.1591108731.git.daniel@iogearbox.net |
||
|
Daniel Borkmann
|
7cdec54f97 |
bpf: Add csum_level helper for fixing up csum levels
Add a bpf_csum_level() helper which BPF programs can use in combination
with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET
flag to the latter to avoid falling back to CHECKSUM_NONE.
The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels
via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary()
on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's
csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the
current level. Without this helper, there is no way to otherwise adjust the
skb->csum_level. I did not add an extra dummy flags as there is plenty of free
bitspace in level argument itself iff ever needed in future.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/279ae3717cb3d03c0ffeb511493c93c450a01e1a.1591108731.git.daniel@iogearbox.net
|
||
|
Daniel Borkmann
|
836e66c218 |
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
Lorenz recently reported:
In our TC classifier cls_redirect [0], we use the following sequence of
helper calls to decapsulate a GUE (basically IP + UDP + custom header)
encapsulated packet:
bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO)
bpf_redirect(skb->ifindex, BPF_F_INGRESS)
It seems like some checksums of the inner headers are not validated in
this case. For example, a TCP SYN packet with invalid TCP checksum is
still accepted by the network stack and elicits a SYN ACK. [...]
That is, we receive the following packet from the driver:
| ETH | IP | UDP | GUE | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading.
On this packet we run skb_adjust_room_mac(-encap_len), and get the following:
| ETH | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing
into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is
turned into a no-op due to CHECKSUM_UNNECESSARY.
The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally,
it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does
not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original
skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now
there is no way to adjust the skb->csum_level. NICs that have checksum offload
disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected.
Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and
add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users
from opting out. Opting out is useful for the case where we don't remove/add
full protocol headers, or for the case where a user wants to adjust the csum
level manually e.g. through bpf_csum_level() helper that is added in subsequent
patch.
The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF
bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally
as well but doesn't change layers, only transitions between v4 to v6 and vice
versa, therefore no adoption is required there.
[0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/
Fixes:
|
||
Masami Hiramatsu
|
382561a0f1 |
selftests/sysctl: Make sysctl test driver as a module
Fix config file to require CONFIG_TEST_SYSCTL=m instead of y because this driver introduces a test sysctl interfaces which are normally not used, and only used for the selftest. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Masami Hiramatsu
|
eee470e073 |
selftests/sysctl: Fix to load test_sysctl module
Fix to load test_sysctl.ko module correctly. sysctl.sh checks whether the test module is embedded (or loaded already) or not at first, and if not, it returns skip error instead of trying modprobe. Thus, there is no chance to load the test_sysctl test module. Instead, this removes that module embedded check and returns skip error only if it ensures that there is no embedded test module *and* no loadable test module. This also avoid referring config file since that is not installed. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
Tiezhu Yang
|
3e9b26dc22 |
perf tools: Remove some duplicated includes
There exists some duplicated includes in tools/perf, remove them. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: xuefeng li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1591071304-19338-2-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Adrian Hunter
|
0affd0e526 |
perf symbols: Fix kernel maps for kcore and eBPF
Adjust 'map->pgoff' also when moving a map's start address.
Example with v5.4.34 based kernel:
Before:
$ sudo tools/perf/perf record -a --kcore -e intel_pt//k sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.958 MB perf.data ]
$ sudo tools/perf/perf script --itrace=e >/dev/null
Warning:
961 instruction trace errors
After:
$ sudo tools/perf/perf script --itrace=e >/dev/null
$
Committer testing:
# uname -a
Linux seventh 5.6.10-100.fc30.x86_64 #1 SMP Mon May 4 15:36:44 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
#
Before:
# perf record -a --kcore -e intel_pt//k sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.923 MB perf.data ]
# perf script --itrace=e >/dev/null
Warning:
295 instruction trace errors
#
After:
# perf record -a --kcore -e intel_pt//k sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.919 MB perf.data ]
# perf script --itrace=e >/dev/null
#
Fixes:
|
||
Arnaldo Carvalho de Melo
|
3b1f47d6e7 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
|
||
Jiri Olsa
|
a9a1790247 |
perf stat: Ensure group is defined on top of the same cpu mask
Jin Yao reported the issue (and posted first versions of this change)
with groups being defined over events with different cpu mask.
This causes assert aborts in get_group_fd, like:
# perf stat -M "C2_Pkg_Residency" -a -- sleep 1
perf: util/evsel.c:1464: get_group_fd: Assertion `!(fd == -1)' failed.
Aborted
All the events in the group have to be defined over the same cpus so the
group_fd can be found for every leader/member pair.
Adding check to ensure this condition is met and removing the group
(with warning) if we detect mixed cpus, like:
$ sudo perf stat -e '{power/energy-cores/,cycles},{instructions,power/energy-cores/}'
WARNING: event cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
anon group { instructions, power/energy-cores/ }
Ian asked also for cpu maps details, it's displayed in verbose mode:
$ sudo perf stat -e '{cycles,power/energy-cores/}' -v
WARNING: group events cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
power/energy-cores/: 0
cycles: 0-7
anon group { instructions, power/energy-cores/ }
instructions: 0-7
power/energy-cores/: 0
Committer testing:
[root@seventh ~]# perf stat -e '{power/energy-cores/,cycles},{instructions,power/energy-cores/}'
WARNING: grouped events cpus do not match, disabling group:
anon group { power/energy-cores/, cycles }
anon group { instructions, power/energy-cores/ }
^C
Performance counter stats for 'system wide':
12.62 Joules power/energy-cores/
106,920,637 cycles
80,228,899 instructions # 0.75 insn per cycle
12.62 Joules power/energy-cores/
14.514476987 seconds time elapsed
[root@seventh ~]#
But if we put compatible events in each group it works:
[root@seventh ~]# perf stat -e '{power/energy-cores/,power/energy-ram/},{instructions,cycles}' -a sleep 2
Performance counter stats for 'system wide':
1.95 Joules power/energy-cores/
0.92 Joules power/energy-ram/
29,305,715 instructions # 1.03 insn per cycle
28,423,338 cycles
2.001438142 seconds time elapsed
[root@seventh ~]#
This needs improvement tho:
[root@seventh ~]# perf stat -e '{power/energy-cores/,power/energy-ram/},{instructions,cycles}' sleep 2
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (power/energy-cores/).
/bin/dmesg | grep -i perf may provide additional information.
[root@seventh ~]#
We need to emit a better message, one stating that the power/ events
can't be used for a specific workload, instead it is per-cpu or system
wide.
Fixes:
|
||
|
Linus Torvalds
|
f359287765 |
Merge branch 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro: "Assorted patches from Miklos. An interesting part here is /proc/mounts stuff..." The "/proc/mounts stuff" is using a cursor for keeeping the location data while traversing the mount listing. Also probably worth noting is the addition of faccessat2(), which takes an additional set of flags to specify how the lookup is done (AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH). * 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: add faccessat2 syscall vfs: don't parse "silent" option vfs: don't parse "posixacl" option vfs: don't parse forbidden flags statx: add mount_root statx: add mount ID statx: don't clear STATX_ATIME on SB_RDONLY uapi: deprecate STATX_ALL utimensat: AT_EMPTY_PATH support vfs: split out access_override_creds() proc/mounts: add cursor aio: fix async fsync creds vfs: allow unprivileged whiteout creation |
||
|
Linus Torvalds
|
b23c4771ff |
A fair amount of stuff this time around, dominated by yet another massive
set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7 +NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw= =fDC/ -----END PGP SIGNATURE----- Merge tag 'docs-5.8' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ... |
||
Jakub Sitnicki
|
06716e04a0 |
selftests/bpf: Extend test_flow_dissector to cover link creation
Extend the existing flow_dissector test case to run tests once using direct prog attachments, and then for the second time using indirect attachment via link. The intention is to exercises the newly added high-level API for attaching programs to network namespace with links (bpf_program__attach_netns). Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-13-jakub@cloudflare.com |
||
|
Jakub Sitnicki
|
b4b8a3bf9e |
selftests/bpf: Convert test_flow_dissector to use BPF skeleton
Switch flow dissector test setup from custom BPF object loader to BPF skeleton to save boilerplate and prepare for testing higher-level API for attaching flow dissector with bpf_link. To avoid depending on program order in the BPF object when populating the flow dissector PROG_ARRAY map, change the program section names to contain the program index into the map. This follows the example set by tailcall tests. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-12-jakub@cloudflare.com |
||
|
Jakub Sitnicki
|
b8215dce7d |
selftests/bpf, flow_dissector: Close TAP device FD after the test
test_flow_dissector leaves a TAP device after it's finished, potentially
interfering with other tests that will run after it. Fix it by closing the
TAP descriptor on cleanup.
Fixes:
|
||
|
Jakub Sitnicki
|
1f043f87bb |
selftests/bpf: Add tests for attaching bpf_link to netns
Extend the existing test case for flow dissector attaching to cover: - link creation, - link updates, - link info querying, - mixing links with direct prog attachment. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-10-jakub@cloudflare.com |
||
|
Jakub Sitnicki
|
e948947a6e |
bpftool: Support link show for netns-attached links
Make `bpf link show` aware of new link type, that is links attached to
netns. When listing netns-attached links, display netns inode number as its
identifier and link attach type.
Sample session:
# readlink /proc/self/ns/net
net:[4026532251]
# bpftool prog show
357: flow_dissector tag a04f5eef06a7f555 gpl
loaded_at 2020-05-30T16:53:51+0200 uid 0
xlated 16B jited 37B memlock 4096B
358: flow_dissector tag a04f5eef06a7f555 gpl
loaded_at 2020-05-30T16:53:51+0200 uid 0
xlated 16B jited 37B memlock 4096B
# bpftool link show
108: netns prog 357
netns_ino 4026532251 attach_type flow_dissector
# bpftool link -jp show
[{
"id": 108,
"type": "netns",
"prog_id": 357,
"netns_ino": 4026532251,
"attach_type": "flow_dissector"
}
]
(... after netns is gone ...)
# bpftool link show
108: netns prog 357
netns_ino 0 attach_type flow_dissector
# bpftool link -jp show
[{
"id": 108,
"type": "netns",
"prog_id": 357,
"netns_ino": 0,
"attach_type": "flow_dissector"
}
]
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-9-jakub@cloudflare.com
|
||
|
Jakub Sitnicki
|
be6e19818b |
bpftool: Extract helpers for showing link attach type
Code for printing link attach_type is duplicated in a couple of places, and likely will be duplicated for future link types as well. Create helpers to prevent duplication. Suggested-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-8-jakub@cloudflare.com |
||
|
Jakub Sitnicki
|
d60d81acc2 |
libbpf: Add support for bpf_link-based netns attachment
Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create an FD-based kernel bpf_link, for attach types tied to network namespace, that is BPF_FLOW_DISSECTOR for the moment. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-7-jakub@cloudflare.com |
||
|
Jakub Sitnicki
|
7f045a49fe |
bpf: Add link-based BPF program attachment to network namespace
Extend bpf() syscall subcommands that operate on bpf_link, that is LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to network namespaces (only flow dissector at the moment). Link-based and prog-based attachment can be used interchangeably, but only one can exist at a time. Attempts to attach a link when a prog is already attached directly, and the other way around, will be met with -EEXIST. Attempts to detach a program when link exists result in -EINVAL. Attachment of multiple links of same attach type to one netns is not supported with the intention to lift the restriction when a use-case presents itself. Because of that link create returns -E2BIG when trying to create another netns link, when one already exists. Link-based attachments to netns don't keep a netns alive by holding a ref to it. Instead links get auto-detached from netns when the latter is being destroyed, using a pernet pre_exit callback. When auto-detached, link lives in defunct state as long there are open FDs for it. -ENOLINK is returned if a user tries to update a defunct link. Because bpf_link to netns doesn't hold a ref to struct net, special care is taken when releasing, updating, or filling link info. The netns might be getting torn down when any of these link operations are in progress. That is why auto-detach and update/release/fill_info are synchronized by the same mutex. Also, link ops have to always check if auto-detach has not happened yet and if netns is still alive (refcnt > 0). Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com |
||
|
Linus Torvalds
|
533b220f7b |
arm64 updates for 5.8
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
||
|
Andrii Nakryiko
|
febeb6dff7 |
libbpf: Add _GNU_SOURCE for reallocarray to ringbuf.c
On systems with recent enough glibc, reallocarray compat won't kick in, so
reallocarray() itself has to come from stdlib.h include. But _GNU_SOURCE is
necessary to enable it. So add it.
Fixes:
|
||
Ferenc Fejes
|
9c441fe4c0 |
selftests/bpf: Add test for SO_BINDTODEVICE opt of bpf_setsockopt
This test intended to verify if SO_BINDTODEVICE option works in bpf_setsockopt. Because we already in the SOL_SOCKET level in this connect bpf prog its safe to verify the sanity in the beginning of the connect_v4_prog by calling the bind_to_device test helper. The testing environment already created by the test_sock_addr.sh script so this test assume that two netdevices already existing in the system: veth pair with names test_sock_addr1 and test_sock_addr2. The test will try to bind the socket to those devices first. Then the test assume there are no netdevice with "nonexistent_dev" name so the bpf_setsockopt will give use ENODEV error. At the end the test remove the device binding from the socket by binding it to an empty name. Signed-off-by: Ferenc Fejes <fejes@inf.elte.hu> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/3f055b8e45c65639c5c73d0b4b6c589e60b86f15.1590871065.git.fejes@inf.elte.hu |
||
John Fastabend
|
463bac5f1c |
bpf, selftests: Add test for ktls with skb bpf ingress policy
This adds a test for bpf ingress policy. To ensure data writes happen as expected with extra TLS headers we run these tests with data verification enabled by default. This will test receive packets have "PASS" stamped into the front of the payload. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159079363965.5745.3390806911628980210.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Alexei Starovoitov
|
df8fe57c07 |
tools/bpf: sync bpf.h
Sync bpf.h into tool/include/uapi/ Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
David Ahern
|
d39aec79e5 |
selftest: Add tests for XDP programs in devmap entries
Add tests to verify ability to add an XDP program to a entry in a DEVMAP. Add negative tests to show DEVMAP programs can not be attached to devices as a normal XDP program, and accesses to egress_ifindex require BPF_XDP_DEVMAP attach type. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-6-dsahern@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David Ahern
|
2778797037 |
libbpf: Add SEC name for xdp programs attached to device map
Support SEC("xdp_devmap*") as a short cut for loading the program with
type BPF_PROG_TYPE_XDP and expected attach type BPF_XDP_DEVMAP.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-5-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
David Ahern
|
64b59025c1 |
xdp: Add xdp_txq_info to xdp_buff
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the moment only the device is added. Other fields (queue_index) can be added as use cases arise. >From a UAPI perspective, add egress_ifindex to xdp context for bpf programs to see the Tx device. Update the verifier to only allow accesses to egress_ifindex by XDP programs with BPF_XDP_DEVMAP expected attach type. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
David Ahern
|
fbee97feed |
bpf: Add support to attach bpf program to a devmap entry
Add BPF_XDP_DEVMAP attach type for use with programs associated with a DEVMAP entry. Allow DEVMAPs to associate a program with a device entry by adding a bpf_prog.fd to 'struct bpf_devmap_val'. Values read show the program id, so the fd and id are a union. bpf programs can get access to the struct via vmlinux.h. The program associated with the fd must have type XDP with expected attach type BPF_XDP_DEVMAP. When a program is associated with a device index, the program is run on an XDP_REDIRECT and before the buffer is added to the per-cpu queue. At this point rxq data is still valid; the next patch adds tx device information allowing the prorgam to see both ingress and egress device indices. XDP generic is skb based and XDP programs do not work with skb's. Block the use case by walking maps used by a program that is to be attached via xdpgeneric and fail if any of them are DEVMAP / DEVMAP_HASH with Block attach of BPF_XDP_DEVMAP programs to devices. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200529220716.75383-3-dsahern@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
c97099b0f2 |
bpf: Add BPF ringbuf and perf buffer benchmarks
Extend bench framework with ability to have benchmark-provided child argument
parser for custom benchmark-specific parameters. This makes bench generic code
modular and independent from any specific benchmark.
Also implement a set of benchmarks for new BPF ring buffer and existing perf
buffer. 4 benchmarks were implemented: 2 variations for each of BPF ringbuf
and perfbuf:,
- rb-libbpf utilizes stock libbpf ring_buffer manager for reading data;
- rb-custom implements custom ring buffer setup and reading code, to
eliminate overheads inherent in generic libbpf code due to callback
functions and the need to update consumer position after each consumed
record, instead of batching updates (due to pessimistic assumption that
user callback might take long time and thus could unnecessarily hold ring
buffer space for too long);
- pb-libbpf uses stock libbpf perf_buffer code with all the default
settings, though uses higher-performance raw event callback to minimize
unnecessary overhead;
- pb-custom implements its own custom consumer code to minimize any possible
overhead of generic libbpf implementation and indirect function calls.
All of the test support default, no data notification skipped, mode, as well
as sampled mode (with --rb-sampled flag), which allows to trigger epoll
notification less frequently and reduce overhead. As will be shown, this mode
is especially critical for perf buffer, which suffers from high overhead of
wakeups in kernel.
Otherwise, all benchamrks implement similar way to generate a batch of records
by using fentry/sys_getpgid BPF program, which pushes a bunch of records in
a tight loop and records number of successful and dropped samples. Each record
is a small 8-byte integer, to minimize the effect of memory copying with
bpf_perf_event_output() and bpf_ringbuf_output().
Benchmarks that have only one producer implement optional back-to-back mode,
in which record production and consumption is alternating on the same CPU.
This is the highest-throughput happy case, showing ultimate performance
achievable with either BPF ringbuf or perfbuf.
All the below scenarios are implemented in a script in
benchs/run_bench_ringbufs.sh. Tests were performed on 28-core/56-thread
Intel Xeon CPU E5-2680 v4 @ 2.40GHz CPU.
Single-producer, parallel producer
==================================
rb-libbpf 12.054 ± 0.320M/s (drops 0.000 ± 0.000M/s)
rb-custom 8.158 ± 0.118M/s (drops 0.001 ± 0.003M/s)
pb-libbpf 0.931 ± 0.007M/s (drops 0.000 ± 0.000M/s)
pb-custom 0.965 ± 0.003M/s (drops 0.000 ± 0.000M/s)
Single-producer, parallel producer, sampled notification
========================================================
rb-libbpf 11.563 ± 0.067M/s (drops 0.000 ± 0.000M/s)
rb-custom 15.895 ± 0.076M/s (drops 0.000 ± 0.000M/s)
pb-libbpf 9.889 ± 0.032M/s (drops 0.000 ± 0.000M/s)
pb-custom 9.866 ± 0.028M/s (drops 0.000 ± 0.000M/s)
Single producer on one CPU, consumer on another one, both running at full
speed. Curiously, rb-libbpf has higher throughput than objectively faster (due
to more lightweight consumer code path) rb-custom. It appears that faster
consumer causes kernel to send notifications more frequently, because consumer
appears to be caught up more frequently. Performance of perfbuf suffers from
default "no sampling" policy and huge overhead that causes.
In sampled mode, rb-custom is winning very significantly eliminating too
frequent in-kernel wakeups, the gain appears to be more than 2x.
Perf buffer achieves even more impressive wins, compared to stock perfbuf
settings, with 10x improvements in throughput with 1:500 sampling rate. The
trade-off is that with sampling, application might not get next X events until
X+1st arrives, which is not always acceptable. With steady influx of events,
though, this shouldn't be a problem.
Overall, single-producer performance of ring buffers seems to be better no
matter the sampled/non-sampled modes, but it especially beats ring buffer
without sampling due to its adaptive notification approach.
Single-producer, back-to-back mode
==================================
rb-libbpf 15.507 ± 0.247M/s (drops 0.000 ± 0.000M/s)
rb-libbpf-sampled 14.692 ± 0.195M/s (drops 0.000 ± 0.000M/s)
rb-custom 21.449 ± 0.157M/s (drops 0.000 ± 0.000M/s)
rb-custom-sampled 20.024 ± 0.386M/s (drops 0.000 ± 0.000M/s)
pb-libbpf 1.601 ± 0.015M/s (drops 0.000 ± 0.000M/s)
pb-libbpf-sampled 8.545 ± 0.064M/s (drops 0.000 ± 0.000M/s)
pb-custom 1.607 ± 0.022M/s (drops 0.000 ± 0.000M/s)
pb-custom-sampled 8.988 ± 0.144M/s (drops 0.000 ± 0.000M/s)
Here we test a back-to-back mode, which is arguably best-case scenario both
for BPF ringbuf and perfbuf, because there is no contention and for ringbuf
also no excessive notification, because consumer appears to be behind after
the first record. For ringbuf, custom consumer code clearly wins with 21.5 vs
16 million records per second exchanged between producer and consumer. Sampled
mode actually hurts a bit due to slightly slower producer logic (it needs to
fetch amount of data available to decide whether to skip or force notification).
Perfbuf with wakeup sampling gets 5.5x throughput increase, compared to
no-sampling version. There also doesn't seem to be noticeable overhead from
generic libbpf handling code.
Perfbuf back-to-back, effect of sample rate
===========================================
pb-sampled-1 1.035 ± 0.012M/s (drops 0.000 ± 0.000M/s)
pb-sampled-5 3.476 ± 0.087M/s (drops 0.000 ± 0.000M/s)
pb-sampled-10 5.094 ± 0.136M/s (drops 0.000 ± 0.000M/s)
pb-sampled-25 7.118 ± 0.153M/s (drops 0.000 ± 0.000M/s)
pb-sampled-50 8.169 ± 0.156M/s (drops 0.000 ± 0.000M/s)
pb-sampled-100 8.887 ± 0.136M/s (drops 0.000 ± 0.000M/s)
pb-sampled-250 9.180 ± 0.209M/s (drops 0.000 ± 0.000M/s)
pb-sampled-500 9.353 ± 0.281M/s (drops 0.000 ± 0.000M/s)
pb-sampled-1000 9.411 ± 0.217M/s (drops 0.000 ± 0.000M/s)
pb-sampled-2000 9.464 ± 0.167M/s (drops 0.000 ± 0.000M/s)
pb-sampled-3000 9.575 ± 0.273M/s (drops 0.000 ± 0.000M/s)
This benchmark shows the effect of event sampling for perfbuf. Back-to-back
mode for highest throughput. Just doing every 5th record notification gives
3.5x speed up. 250-500 appears to be the point of diminishing return, with
almost 9x speed up. Most benchmarks use 500 as the default sampling for pb-raw
and pb-custom.
Ringbuf back-to-back, effect of sample rate
===========================================
rb-sampled-1 1.106 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-sampled-5 4.746 ± 0.149M/s (drops 0.000 ± 0.000M/s)
rb-sampled-10 7.706 ± 0.164M/s (drops 0.000 ± 0.000M/s)
rb-sampled-25 12.893 ± 0.273M/s (drops 0.000 ± 0.000M/s)
rb-sampled-50 15.961 ± 0.361M/s (drops 0.000 ± 0.000M/s)
rb-sampled-100 18.203 ± 0.445M/s (drops 0.000 ± 0.000M/s)
rb-sampled-250 19.962 ± 0.786M/s (drops 0.000 ± 0.000M/s)
rb-sampled-500 20.881 ± 0.551M/s (drops 0.000 ± 0.000M/s)
rb-sampled-1000 21.317 ± 0.532M/s (drops 0.000 ± 0.000M/s)
rb-sampled-2000 21.331 ± 0.535M/s (drops 0.000 ± 0.000M/s)
rb-sampled-3000 21.688 ± 0.392M/s (drops 0.000 ± 0.000M/s)
Similar benchmark for ring buffer also shows a great advantage (in terms of
throughput) of skipping notifications. Skipping every 5th one gives 4x boost.
Also similar to perfbuf case, 250-500 seems to be the point of diminishing
returns, giving roughly 20x better results.
Keep in mind, for this test, notifications are controlled manually with
BPF_RB_NO_WAKEUP and BPF_RB_FORCE_WAKEUP. As can be seen from previous
benchmarks, adaptive notifications based on consumer's positions provides same
(or even slightly better due to simpler load generator on BPF side) benefits in
favorable back-to-back scenario. Over zealous and fast consumer, which is
almost always caught up, will make thoughput numbers smaller. That's the case
when manual notification control might prove to be extremely beneficial.
Ringbuf back-to-back, reserve+commit vs output
==============================================
reserve 22.819 ± 0.503M/s (drops 0.000 ± 0.000M/s)
output 18.906 ± 0.433M/s (drops 0.000 ± 0.000M/s)
Ringbuf sampled, reserve+commit vs output
=========================================
reserve-sampled 15.350 ± 0.132M/s (drops 0.000 ± 0.000M/s)
output-sampled 14.195 ± 0.144M/s (drops 0.000 ± 0.000M/s)
BPF ringbuf supports two sets of APIs with various usability and performance
tradeoffs: bpf_ringbuf_reserve()+bpf_ringbuf_commit() vs bpf_ringbuf_output().
This benchmark clearly shows superiority of reserve+commit approach, despite
using a small 8-byte record size.
Single-producer, consumer/producer competing on the same CPU, low batch count
=============================================================================
rb-libbpf 3.045 ± 0.020M/s (drops 3.536 ± 0.148M/s)
rb-custom 3.055 ± 0.022M/s (drops 3.893 ± 0.066M/s)
pb-libbpf 1.393 ± 0.024M/s (drops 0.000 ± 0.000M/s)
pb-custom 1.407 ± 0.016M/s (drops 0.000 ± 0.000M/s)
This benchmark shows one of the worst-case scenarios, in which producer and
consumer do not coordinate *and* fight for the same CPU. No batch count and
sampling settings were able to eliminate drops for ringbuffer, producer is
just too fast for consumer to keep up. But ringbuf and perfbuf still able to
pass through quite a lot of messages, which is more than enough for a lot of
applications.
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 10.916 ± 0.399M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 4.931 ± 0.030M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 4.880 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 3.926 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 4.011 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.967 ± 0.016M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 2.604 ± 0.030M/s (drops 0.001 ± 0.002M/s)
rb-libbpf nr_prod 20 2.233 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.085 ± 0.015M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.055 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.962 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.089 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.118 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.105 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.120 ± 0.058M/s (drops 0.000 ± 0.001M/s)
rb-libbpf nr_prod 52 2.074 ± 0.024M/s (drops 0.007 ± 0.014M/s)
Ringbuf uses a very short-duration spinlock during reservation phase, to check
few invariants, increment producer count and set record header. This is the
biggest point of contention for ringbuf implementation. This benchmark
evaluates the effect of multiple competing writers on overall throughput of
a single shared ringbuffer.
Overall throughput drops almost 2x when going from single to two
highly-contended producers, gradually dropping with additional competing
producers. Performance drop stabilizes at around 20 producers and hovers
around 2mln even with 50+ fighting producers, which is a 5x drop compared to
non-contended case. Good kernel implementation in kernel helps maintain decent
performance here.
Note, that in the intended real-world scenarios, it's not expected to get even
close to such a high levels of contention. But if contention will become
a problem, there is always an option of sharding few ring buffers across a set
of CPUs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-5-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Andrii Nakryiko
|
cb1c9ddd55 |
selftests/bpf: Add BPF ringbuf selftests
Both singleton BPF ringbuf and BPF ringbuf with map-in-map use cases are tested. Also reserve+submit/discards and output variants of API are validated. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-4-andriin@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
bf99c936f9 |
libbpf: Add BPF ring buffer support
Declaring and instantiating BPF ring buffer doesn't require any changes to
libbpf, as it's just another type of maps. So using existing BTF-defined maps
syntax with __uint(type, BPF_MAP_TYPE_RINGBUF) and __uint(max_elements,
<size-of-ring-buf>) is all that's necessary to create and use BPF ring buffer.
This patch adds BPF ring buffer consumer to libbpf. It is very similar to
perf_buffer implementation in terms of API, but also attempts to fix some
minor problems and inconveniences with existing perf_buffer API.
ring_buffer support both single ring buffer use case (with just using
ring_buffer__new()), as well as allows to add more ring buffers, each with its
own callback and context. This allows to efficiently poll and consume
multiple, potentially completely independent, ring buffers, using single
epoll instance.
The latter is actually a problem in practice for applications
that are using multiple sets of perf buffers. They have to create multiple
instances for struct perf_buffer and poll them independently or in a loop,
each approach having its own problems (e.g., inability to use a common poll
timeout). struct ring_buffer eliminates this problem by aggregating many
independent ring buffer instances under the single "ring buffer manager".
Second, perf_buffer's callback can't return error, so applications that need
to stop polling due to error in data or data signalling the end, have to use
extra mechanisms to signal that polling has to stop. ring_buffer's callback
can return error, which will be passed through back to user code and can be
acted upon appropariately.
Two APIs allow to consume ring buffer data:
- ring_buffer__poll(), which will wait for data availability notification
and will consume data only from reported ring buffer(s); this API allows
to efficiently use resources by reading data only when it becomes
available;
- ring_buffer__consume(), will attempt to read new records regardless of
data availablity notification sub-system. This API is useful for cases
when lowest latency is required, in expense of burning CPU resources.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-3-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Andrii Nakryiko
|
457f44363a |
bpf: Implement BPF ring buffer and verifier support for it
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Anton Protopopov
|
43dd115b1f |
selftests/bpf: Add tests for write-only stacks/queues
For write-only stacks and queues bpf_map_update_elem should be allowed, but bpf_map_lookup_elem and bpf_map_lookup_and_delete_elem should fail with EPERM. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-6-a.s.protopopov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Anton Protopopov
|
efbc3b8fe1 |
selftests/bpf: Cleanup comments in test_maps
Make comments inside the test_map_rdonly and test_map_wronly tests consistent with logic. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-4-a.s.protopopov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Anton Protopopov
|
36ef9a2d3f |
selftests/bpf: Cleanup some file descriptors in test_maps
The test_map_rdonly and test_map_wronly tests should close file descriptors which they open. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-3-a.s.protopopov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Anton Protopopov
|
204fb0413a |
selftests/bpf: Fix a typo in test_maps
Trivial fix to a typo in the test_map_wronly test: "read" -> "write" Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-2-a.s.protopopov@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Eelco Chaudron
|
601b05ca6e |
libbpf: Fix perf_buffer__free() API for sparse allocs
In case the cpu_bufs are sparsely allocated they are not all
free'ed. These changes will fix this.
Fixes:
|
||
|
John Fastabend
|
ee103e9f15 |
bpf, selftests: Test probe_* helpers from SCHED_CLS
Lets test using probe* in SCHED_CLS network programs as well just to be sure these keep working. Its cheap to add the extra test and provides a second context to test outside of sk_msg after we generalized probe* helpers to all networking types. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159033911685.12355.15951980509828906214.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
John Fastabend
|
1d9c037a89 |
bpf, selftests: Add sk_msg helpers load and attach test
The test itself is not particularly useful but it encodes a common pattern we have. Namely do a sk storage lookup then depending on data here decide if we need to do more work or alternatively allow packet to PASS. Then if we need to do more work consult task_struct for more information about the running task. Finally based on this additional information drop or pass the data. In this case the suspicious check is not so realisitic but it encodes the general pattern and uses the helpers so we test the workflow. This is a load test to ensure verifier correctly handles this case. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159033909665.12355.6166415847337547879.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
John Fastabend
|
13d70f5a5e |
bpf, sk_msg: Add get socket storage helpers
Add helpers to use local socket storage. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033907577.12355.14740125020572756560.stgit@john-Precision-5820-Tower Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Yauheni Kaliuta
|
55983299b7 |
libbpf: Use .so dynamic symbols for abi check
Since dynamic symbols are used for dynamic linking it makes sense to use them (readelf --dyn-syms) for abi check. Found with some configuration on powerpc where linker puts local *.plt_call.* symbols into .so. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200525061846.16524-1-yauheni.kaliuta@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Nikolay Borisov
|
93581359e7 |
libbpf: Install headers as part of make install
Current 'make install' results in only pkg-config and library binaries being installed. For consistency also install headers as part of "make install" Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200526174612.5447-1-nborisov@suse.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eelco Chaudron
|
272d51af32 |
libbpf: Add API to consume the perf ring buffer content
This new API, perf_buffer__consume, can be used as follows: - When you have a perf ring where wakeup_events is higher than 1, and you have remaining data in the rings you would like to pull out on exit (or maybe based on a timeout). - For low latency cases where you burn a CPU that constantly polls the queues. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Tobias Klauser
|
dc3ca5cf3e |
tools, bpftool: Print correct error message when failing to load BTF
btf__parse_raw and btf__parse_elf return negative error numbers wrapped in an ERR_PTR, so the extracted value needs to be negated before passing them to strerror which expects a positive error number. Before: Error: failed to load BTF from .../vmlinux: Unknown error -2 After: Error: failed to load BTF from .../vmlinux: No such file or directory Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525135421.4154-1-tklauser@distanz.ch Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Quentin Monnet
|
73a4f0407e |
tools, bpftool: Make capability check account for new BPF caps
Following the introduction of CAP_BPF, and the switch from CAP_SYS_ADMIN to other capabilities for various BPF features, update the capability checks (and potentially, drops) in bpftool for feature probes. Because bpftool and/or the system might not know of CAP_BPF yet, some caution is necessary: - If compiled and run on a system with CAP_BPF, check CAP_BPF, CAP_SYS_ADMIN, CAP_PERFMON, CAP_NET_ADMIN. - Guard against CAP_BPF being undefined, to allow compiling bpftool from latest sources on older systems. If the system where feature probes are run does not know of CAP_BPF, stop checking after CAP_SYS_ADMIN, as this should be the only capability required for all the BPF probing. - If compiled from latest sources on a system without CAP_BPF, but later executed on a newer system with CAP_BPF knowledge, then we only test CAP_SYS_ADMIN. Some probes may fail if the bpftool process has CAP_SYS_ADMIN but misses the other capabilities. The alternative would be to redefine the value for CAP_BPF in bpftool, but this does not look clean, and the case sounds relatively rare anyway. Note that libcap offers a cap_to_name() function to retrieve the name of a given capability (e.g. "cap_sys_admin"). We do not use it because deriving the names from the macros looks simpler than using cap_to_name() (doing a strdup() on the string) + cap_free() + handling the case of failed allocations, when we just want to use the name of the capability in an error message. The checks when compiling without libcap (i.e. root versus non-root) are unchanged. v2: - Do not allocate cap_list dynamically. - Drop BPF-related capabilities when running with "unprivileged", even if we didn't have the full set in the first place (in v1, we would skip dropping them in that case). - Keep track of what capabilities we have, print the names of the missing ones for privileged probing. - Attempt to drop only the capabilities we actually have. - Rename a couple variables. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200523010247.20654-1-quentin@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Quentin Monnet
|
90040351a8 |
tools, bpftool: Clean subcommand help messages
This is a clean-up for the formatting of the do_help functions for bpftool's subcommands. The following fixes are included: - Do not use argv[-2] for "iter" help message, as the help is shown by default if no "iter" action is selected, resulting in messages looking like "./bpftool bpftool pin...". - Do not print unused HELP_SPEC_PROGRAM in help message for "bpftool link". - Andrii used argument indexing to avoid having multiple occurrences of bin_name and argv[-2] in the fprintf() for the help message, for "bpftool gen" and "bpftool link". Let's reuse this for all other help functions. We can remove up to thirty arguments for the "bpftool map" help message. - Harmonise all functions, e.g. use ending quotes-comma on a separate line. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200523010751.23465-1-quentin@isovalent.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
d861f6e682 |
Misc cleanups in the SMP hotplug and cross-call code.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7VJfsRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1ihcA/+Ko18kdGRPAlShM9qkDWO5N80p1LEp7F0 ku1OxPAz9ii7K/jlnGr9wYYPxsIL3lbFeqFE7q5q5socXufaN8MUj9sVCmN7ScmR zO84aTHtxrJJhKIPM6HkUTbVl5KrQaud3F/J56CCjuKPsJWy9iuCGnKtfKK38bx+ qJEfVKVm95Bv0NSEvqvci3DKKPYjzpKzuuttHXQ8Z80zG94FEkwj0JwZzttIjLl1 rgRMgWTH7+3tQCMnZEfXG8xBxbXS9i3hKyr/v5QTNgIICyXGquPkf5MiwjJFS2Xb wpPqNh8HTo5kUJstYygRjcftatU7K72h2Rz/CoUkN2roNYlvRAhdBaBMwN0cGaG8 pPhnLHHHRYZjl4fiROgRwVV3A6LcAHSrIcKzwGrvpCSpqyVozPGsmD/e8ZG1JYpC vxESTZbCDywng2Ls8jqQBut+dFGElvopXl1s004bCak89IFR4p15qojMJK2MSsqu BxhjIoqp8/f1fsAX+1p0RBEYnEr1KFtWa+nY8aVKL6bEx+Y7Qyq0ypMGtKavP06X VMcPMm1gYeXoGpLaTLYBRL5t7Rmm7i+xufuDQKUJetenfh2YS4aQ9lfV+rsQH1YE wavQrbwThfBZ9K1XkEmOkSqONysZ2YAtK9slKzciQIZvY3V8NbKAmBudCgqTgarp xqeW9NFfeFc= =Rr2n -----END PGP SIGNATURE----- Merge tag 'smp-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP updates from Ingo Molnar: "Misc cleanups in the SMP hotplug and cross-call code" * tag 'smp-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove __freeze_secondary_cpus() cpu/hotplug: Remove disable_nonboot_cpus() cpu/hotplug: Fix a typo in comment "broadacasted"->"broadcasted" smp: Use smp_call_func_t in on_each_cpu() |
||
|
Linus Torvalds
|
a7092c8204 |
Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
|
||
Vitor Massaru Iha
|
01397e822a |
kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig
The identation before this code
(`if not os.path.exists(cli_args.build_dir):``)
was with spaces instead of tabs after fixed up merge conflits,
this commit revert spaces to tabs:
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
File "tools/testing/kunit/kunit.py", line 247
if not linux:
^
TabError: inconsistent use of tabs and spaces in indentation
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 338, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 215, in main
add_config_opts(config_parser)
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 337, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 255, in main
result = run_tests(linux, request)
File "tools/testing/kunit/kunit.py", line 133, in run_tests
request.defconfig,
AttributeError: 'KunitRequest' object has no attribute 'defconfig'
Handles when there is no .kunitconfig, the error due to merge conflicts
between the following:
commit
|
||
|
Linus Torvalds
|
69fc06f70f |
There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large number of sections
- Improve objtool's understanding of special instructions such as IRET,
to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dbCU
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large
number of sections
- Improve objtool's understanding of special instructions such as
IRET, to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups"
* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
objtool: Enable compilation of objtool for all architectures
objtool: Move struct objtool_file into arch-independent header
objtool: Exit successfully when requesting help
objtool: Add check_kcov_mode() to the uaccess safelist
samples/ftrace: Fix asm function ELF annotations
objtool: optimize add_dead_ends for split sections
objtool: use gelf_getsymshndx to handle >64k sections
objtool: Allow no-op CFI ops in alternatives
x86/retpoline: Fix retpoline unwind
x86: Change {JMP,CALL}_NOSPEC argument
x86: Simplify retpoline declaration
x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
objtool: Add support for intra-function calls
objtool: Move the IRET hack into the arch decoder
objtool: Remove INSN_STACK
objtool: Make handle_insn_ops() unconditional
objtool: Rework allocating stack_ops on decode
objtool: UNWIND_HINT_RET_OFFSET should not check registers
objtool: is_fentry_call() crashes if call has no destination
x86,smap: Fix smap_{save,restore}() alternatives
...
|
||
|
Linus Torvalds
|
2227e5b21a |
The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
|
||
|
Linus Torvalds
|
829f3b9401 |
Fixes and new features for pstore
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
|
||
Ido Schimmel
|
9959b38977 |
selftests: mlxsw: Add test for control packets
Generate packets matching the various control traps and check that the traps' stats increase accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Arnd Bergmann
|
37744feebc |
sh: remove sh5 support
sh5 never became a product and has probably never really worked. Remove it by recursively deleting all associated Kconfig options and all corresponding files. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rich Felker <dalias@libc.org> |
||
|
Linus Torvalds
|
a36de5ebac |
spi: Updates for v5.8
This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with some
of that work still not landed. Otherwise it's been fairly quiet for the
subsystem. Highlights include:
- Lots of performance improvements and fixes for the DesignWare driver
from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement Leger,
Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4,
and Intel Elkhart Lake.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U6r0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LasB/9npXOMe6tOT03YqtIhN4pxrdUo+LsN
A5Rc8prfQo7srnIZMndt5/wcTftomVdvjSNrtyXMXtzj+Logx01Pndrr6UVUP6Qq
Sy0R+4QXBSlj5QtUOBvGFTlzKw2BEaOBYftxVKQM6s4eoefvl0BFALHpEeaHvsDO
YXfwU8EK6sZylDzvsuVy2uoJlTcY4+wKop7JWY5Ze+LTUjsuJQVEG9zbxpZNEpOn
ZHO3FVS2MlIAuhcVmy0TfvYxTldTrT89zv8x4sKaPaXwDJFzYjJBwz77vYAjD8u5
i52JhrAMkZyU4SZdnciJLJx9oTdT8+Rj32oQBU6uK8nRN7U3zflNHHQw
=qm1J
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
|
||
Vitaly Kuznetsov
|
13ffbd8db1 |
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
vmx_tsc_adjust_test fails with:
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is 281470681738540 (65534 * TSC_ADJUST_VALUE + 4294962476).
==== Test Assertion Failure ====
x86_64/vmx_tsc_adjust_test.c:153: false
pid=19738 tid=19738 - Interrupted system call
1 0x0000000000401192: main at vmx_tsc_adjust_test.c:153
2 0x00007fe1ef8583d4: ?? ??:0
3 0x0000000000401201: _start at ??:?
Failed guest assert: (adjust <= max)
The problem is that is 'tsc_val' should be u64, not u32 or the reading
gets truncated.
Fixes:
|
||
Ian Rogers
|
5cf0e8ebc2 |
perf libdw: Fix off-by 1 relative directory includes
This is currently working due to extra include paths in the build. Before: $ cd tools/perf/arch/arm64/util $ ls -la ../../util/unwind-libdw.h ls: cannot access '../../util/unwind-libdw.h': No such file or directory After: $ ls -la ../../../util/unwind-libdw.h -rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200529225232.207532-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Tan Xiaojun
|
a54ca19498 |
perf arm-spe: Support synthetic events
After the commit
|
||
|
Tan Xiaojun
|
9f74d77018 |
perf auxtrace: Add four itrace options
This patch is to add four options to synthesize events which are described as below: 'f': synthesize first level cache events 'm': synthesize last level cache events 't': synthesize TLB events 'a': synthesize remote access events This four options will be used by ARM SPE as their first consumer. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Tested-by: James Clark <james.clark@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200530122442.490-3-leo.yan@linaro.org Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Tan Xiaojun
|
4db25f6693 |
perf tools: Move arm-spe-pkt-decoder.h/c to the new dir
Create a new arm-spe-decoder directory for subsequent extensions and move arm-spe-pkt-decoder.h/c to this directory. No code changes. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Tested-by: James Clark <james.clark@arm.com> Tested-by: Qi Liu <liuqi115@hisilicon.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200530122442.490-2-leo.yan@linaro.org Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
0fb0d615f3 |
perf test: Initialize memory in dwarf-unwind
Avoid a false positive caused by assembly code in arch/x86. In tests, zero the perf_event to avoid uninitialized memory uses. Warnings were caught using clang with -fsanitize=memory. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200530082015.39162-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
8617e2e34f |
perf tests: Don't tail call optimize in unwind test
The tail call optimization can unexpectedly make the stack smaller and cause the test to fail. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: clang-built-linux@googlegroups.com Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200530082015.39162-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
21f2b7c133 |
tools compiler.h: Add attribute to disable tail calls
Tail call optimizations can remove stack frames that are used in unwinding tests. Add an attribute that can be used to disable the tail call optimization. Tested on clang and GCC. Committer notes: Old versions of clang don't like that __attribute__((optimize)), so add an ifdef to make it go away. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: clang-built-linux@googlegroups.com Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200530082015.39162-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Tom Zanussi
|
bea24f766e |
selftests/ftrace: Distinguish between hist and synthetic event checks
With synthetic events now a separate config item as a result of 'tracing: Move synthetic events to a separate file', tests that use both need to explicitly check for hist trigger support rather than relying on hist triggers to pull in synthetic events. Add an additional hist trigger check to all the trigger tests that now require it, otherwise they'll fail if synthetic events but not hist triggers are enabled. Link: http://lkml.kernel.org/r/af36c539006ef2768114b4ed38e6b054f7c7a3bd.1590693308.git.zanussi@kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Vitaly Kuznetsov
|
fb0cb6a821 |
KVM: selftests: update hyperv_cpuid with SynDBG tests
Update tests to reflect new CPUID capabilities with SYNDBG. Check that we get the right number of entries and that 0x40000000.EAX always returns the correct max leaf. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200529134543.1127440-7-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Makarand Sonare
|
8d7fbf01f9 |
KVM: selftests: VMX preemption timer migration test
When a nested VM with a VMX-preemption timer is migrated, verify that the nested VM and its parent VM observe the VMX-preemption timer exit close to the original expiration deadline. Signed-off-by: Makarand Sonare <makarandsonare@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200526215107.205814-3-makarandsonare@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
8ec107c89b |
selftests: kvm: fix smm test on SVM
KVM_CAP_NESTED_STATE is now supported for AMD too but smm test acts like it is still Intel only. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200529130407.57176-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Paolo Bonzini
|
10b910cb7e |
selftests: kvm: add a SVM version of state-test
The test is similar to the existing one for VMX, but simpler because we don't have to test shadow VMCS or vmptrld/vmptrst/vmclear. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Vitaly Kuznetsov
|
ed88129733 |
selftests: kvm: introduce cpu_has_svm() check
Many tests will want to check if the CPU is Intel or AMD in guest code, add cpu_has_svm() and put it as static inline to svm_util.h. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200529130407.57176-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
David S. Miller
|
1806c13dc2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
8fc984aedc |
A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current, which is
not the case when fork fails after taking a reference on the ioperm
bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: o"Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build.
-----BEGIN PGP SIGNATURE-----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=DmSb
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
|
||
Petr Machata
|
3ed97037f0 |
selftests: forwarding: pedit_dsfield: Check counter value
A missing stats_update callback was recently added to act_pedit. Now that iproute2 supports JSON dumping for pedit, extend the pedit_dsfield selftest with a check that would have caught the fact that the callback was missing. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Petr Machata
|
1c0522b4a2 |
selftests: forwarding: mirror_lib: Use mausezahn
Using ping in tests is error-prone, because ping is too smart. On a flaky system (notably in a simulator), when packets don't come quickly enough, more pings are sent, and that throws off counters. Instead use mausezahn to generate ICMP echo request packets. That allows us to send them in quicker succession as well, because the reason the ping was made slow in the first place was to make the tests work on simulated systems. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Kees Cook
|
d195c39052 |
pstore/platform: Use backend name for console registration
If the pstore backend changes, there's no indication in the logs what the console is (it always says "pstore"). Instead, pass through the active backend's name. (Also adjust the selftest to match.) Link: https://lore.kernel.org/lkml/20200510202436.63222-5-keescook@chromium.org/ Link: https://lore.kernel.org/lkml/20200526135429.GQ12456@shao2-debian Signed-off-by: Kees Cook <keescook@chromium.org> |
||
Mark Brown
|
fb02b9eb4e
|
Merge remote-tracking branch 'spi/for-5.8' into spi-next | ||
|
David S. Miller
|
f9e0ce3ddc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== pull-request: bpf 2020-05-29 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 7 day(s) which contain a total of 4 files changed, 55 insertions(+), 34 deletions(-). The main changes are: 1) minor verifier fix for fmod_ret progs, from Alexei. 2) af_xdp overflow check, from Bjorn. 3) minor verifier fix for 32bit assignment, from John. 4) powerpc has non-overlapping addr space, from Petr. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
John Fastabend
|
cf66c29bd7 |
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
Added a verifier test for assigning 32bit reg states to 64bit where 32bit reg holds a constant value of 0. Without previous kernel verifier.c fix, the test in this patch will fail. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower |
||
|
John Fastabend
|
e3effcdfe0 |
bpf, selftests: Verifier bounds tests need to be updated
After previous fix for zero extension test_verifier tests #65 and #66 now fail. Before the fix we can see the alu32 mov op at insn 10 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=0,smax_value=2147483647, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm After the fix at insn 10 because we have 's32_min_value < 0' the following step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value bound into the smax_value as seen above in 11 with smax_value=2147483647. 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=4294967295, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0, u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm The fall out of this is by the time we get to the failing instruction at step 14 where previously we had the following: 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=72057594021150720,smax_value=72057594029539328, umin_value=72057594021150720,umax_value=72057594029539328, var_off=(0xffffffff000000; 0xffffff), s32_min_value=-16777216,s32_max_value=-1, u32_min_value=-16777216,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 We now have, 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=72057594037927935, umin_value=0,umax_value=72057594037927935, var_off=(0x0; 0xffffffffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 In the original step 14 'smin_value=72057594021150720' this trips the logic in the verifier function check_reg_sane_offset(), if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) { verbose(env, "value %lld makes %s pointer be out of bounds\n", smin, reg_type_str[type]); return false; } Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix at step 14 we have bounds 'smin_value=0' so the above check is not tripped because BPF_MAX_VAR_OFF=1<<29. We have a smin_value=0 here because at step 10 the smaller smin_value=0 means the subtractions at steps 11 and 12 bring the smin_value negative. 11: (17) r1 -= 2147483584 12: (17) r1 -= 2147483584 13: (77) r1 >>= 8 Then the shift clears the top bit and smin_value is set to 0. Note we still have the smax_value in the fixed code so any reads will fail. An alternative would be to have reg_sane_check() do both smin and smax value tests. To fix the test we can omit the 'r1 >>=8' at line 13. This will change the err string, but keeps the intention of the test as suggseted by the title, "check after truncation of boundary-crossing range". If the verifier logic changes a different value is likely to be thrown in the error or the error will no longer be thrown forcing this test to be examined. With this change we see the new state at step 13. 13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=-4294967168,smax_value=127, umin_value=0,umax_value=18446744073709551615, s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm Giving the expected out of bounds error, "value -4294967168 makes map_value pointer be out of bounds" However, for unpriv case we see a different error now because of the mixed signed bounds pointer arithmatic. This seems OK so I've only added the unpriv_errstr for this. Another optino may have been to do addition on r1 instead of subtraction but I favor the approach above slightly. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159077333942.6014.14004320043595756079.stgit@john-Precision-5820-Tower |
||
|
Arnaldo Carvalho de Melo
|
9300acc6fe |
perf build: Add a LIBPFM4=1 build test entry
So that when one runs: $ make -C tools/perf build-test We make sure that recent changes don't break that opt-in build. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ian Rogers <irogers@google.com> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Cc: yuzhoujian <yuzhoujian@didichuxing.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Stephane Eranian
|
7094349078 |
perf tools: Add optional support for libpfm4
This patch links perf with the libpfm4 library if it is available and LIBPFM4 is passed to the build. The libpfm4 library contains hardware event tables for all processors supported by perf_events. It is a helper library that helps convert from a symbolic event name to the event encoding required by the underlying kernel interface. This library is open-source and available from: http://perfmon2.sf.net. With this patch, it is possible to specify full hardware events by name. Hardware filters are also supported. Events must be specified via the --pfm-events and not -e option. Both options are active at the same time and it is possible to mix and match: $ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles .... One needs to explicitely ask for its inclusion by using the LIBPFM4 make command line option, ie its opt-in rather than opt-out of feature detection and build support. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Cc: yuzhoujian <yuzhoujian@didichuxing.com> Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ed Maste
|
82352ae28f |
perf tools: Correct license on jsmn JSON parser
This header is part of the jsmn JSON parser, introduced in
|
||
Nick Gasson
|
1e4bd2ae45 |
perf jit: Fix inaccurate DWARF line table
Fix an issue where addresses in the DWARF line table are offset by -0x40 (GEN_ELF_TEXT_OFFSET). This can be seen with `objdump -S` on the ELF files after perf inject. Committer notes: Ian added this in his Acked-by reply: --- Without too much knowledge this looks good to me. The original code came from oprofile's jit support: https://sourceforge.net/p/oprofile/oprofile/ci/master/tree/opjitconv/debug_line.c#l325 --- Signed-off-by: Nick Gasson <nick.gasson@arm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200528051916.6722-1-nick.gasson@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Nick Gasson
|
7d7e503cac |
perf jvmti: Remove redundant jitdump line table entries
For each PC/BCI pair in the JVMTI compiler inlining record table, the jitdump plugin emits debug line table entries for every source line in the method preceding that BCI. Instead only emit one source line per PC/BCI pair. Reported by Ian Rogers. This reduces the .dump size for SPECjbb from ~230MB to ~40MB. Signed-off-by: Nick Gasson <nick.gasson@arm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200528054049.13662-1-nick.gasson@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
60da3a12c5 |
perf build: Add NO_SDT=1 to the default set of build tests
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:
$ make -C tools/perf build-test
It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
69fbadbe98 |
perf build: Add NO_LIBCRYPTO=1 to the default set of build tests
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:
$ make -C tools/perf build-test
It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
5bc7aac3e7 |
perf build: Add NO_SYSCALL_TABLE=1 to the build tests
So that we make sure that even on x86-64 and other architectures where
that is the default method we test build the fallback to libaudit that
other architectures use.
I.e. now this line got added to:
$ make -C tools/perf build-test
<SNIP>
make_no_syscall_tbl_O: cd . && make NO_SYSCALL_TABLE=1 FEATURES_DUMP=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP -j12 O=/tmp/tmp.W0HtKR1mfr DESTDIR=/tmp/tmp.lNezgCVPzW
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
a88f70de1b |
perf build: Remove libaudit from the default feature checks
Ingo reported that the libaudit was always appearing as OFF:
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ OFF ]
And everything seemed to work, i.e. we were checking for a feature that
we don't use, causing confusion for people building perf, so work to
remove that nuisance while making sure that it works when an arch
doesn't provide the alternative method to generate the syscall id/name
conversion tables.
Longer explanation of the new modus operandi:
$ make -C tools/perf O=/tmp/build/perf NO_SYSCALL_TABLE=1
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
Makefile.config:665: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
MKDIR /tmp/build/perf/fs/
<SNIP>
$
The libaudit test is forced and it fails when audit-libs-devel isn't available:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
test-libaudit.c:2:10: fatal error: libaudit.h: No such file or directory
2 | #include <libaudit.h>
| ^~~~~~~~~~~~
compilation terminated.
$
If we install audit-libs-devel and rebuild it continues not to be shown as OFF
in the main auto-detection summary, but again gets tested and this time:
$ rpm -q audit-libs-devel
audit-libs-devel-3.0-0.15.20191104git1c2f876.fc31.x86_64
$
The make output for the feature detection comes clean:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
And the feature detection binary is successfully built and is dynamicly linked
with libaudit:
$ ldd /tmp/build/perf/feature/test-libaudit.bin | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007f5bf5177000)
$
As well as the resulting perf binary:
$ ldd /tmp/build/perf/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fad511c7000)
$
And 'perf trace' works using the libaudit method:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.067 ms): sleep/281872 nanosleep(rqtp: 0x7ffedbbe69d0) = 0
$
If we leave audit-libs-devel installed but don't disable the use of the best
method, the one using SYSCALL_TABLE, the default for architectures that provide
the script to build the syscall id/name mapping using the .tbl files copied
from the kernel sources, we get:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make -C tools/perf O=/tmp/build/perf
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
<SNIP>
$
Again, no mention of libaudit being on or OFF and:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
cat: /tmp/build/perf/feature/test-libaudit.make.output: No such file or directory
$
We didn't even bother checking for its availability, slightly speeding up the
build process and:
$ ldd /tmp/build/perf/perf | grep libaudit
$
We don't link with it, also:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.053 ms): sleep/299125 nanosleep(rqtp: 0x7ffc24611b50) = 0
$
And globs become available:
$ sudo /tmp/build/perf/perf trace -e *sleep sleep 1
0.000 (1000.072 ms): sleep/299136 nanosleep(rqtp: 0x7ffe7a3c4ff0) = 0
$
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
d21cb73a90 |
perf trace: Grow the syscall table as needed when using libaudit
The audit-libs API doesn't provide a way to figure out what is the
syscall with the greatest number/id, take that into account when using
that method to go on growing the syscall table as we the syscalls go on
appearing on the radar.
With this the libaudit based method is back working, i.e. when building
with:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007faef22df000)
$
perf trace is back working, which makes it functional in arches other
than x86_64, powerpc, arm64 and s390, that provides these generators:
$ find tools/perf/arch/ -name "*syscalltbl*"
tools/perf/arch/x86/entry/syscalls/syscalltbl.sh
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl
tools/perf/arch/s390/entry/syscalls/mksyscalltbl
tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl
$
Example output forcing the libaudit method on x86_64:
# perf trace -e file,nanosleep sleep 0.001
? ( ): sleep/859090 ... [continued]: execve()) = 0
0.045 ( 0.005 ms): sleep/859090 access(filename: 0x8733e850, mode: R) = -1 ENOENT (No such file or directory)
0.055 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x8733ba29, flags: RDONLY|CLOEXEC) = 3
0.079 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x87345d20, flags: RDONLY|CLOEXEC) = 3
0.085 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483f58, count: 832) = 832
0.090 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b50, count: 784) = 784
0.094 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b20, count: 32) = 32
0.098 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483ad0, count: 68) = 68
0.109 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483a50, count: 784) = 784
0.113 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483730, count: 32) = 32
0.117 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483710, count: 68) = 68
0.320 ( 0.008 ms): sleep/859090 openat(dfd: CWD, filename: 0x872c3660, flags: RDONLY|CLOEXEC) = 3
0.372 ( 1.057 ms): sleep/859090 nanosleep(rqtp: 0x7ffd9d484ac0) = 0
#
There are still some limitations when using the libaudit method, that
will be fixed at some point, i.e., this works with the mksyscalltbl
method but not with libaudit's:
# perf trace -e file,*sleep sleep 0.001
event syntax error: '*sleep'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
a9e8c1f856 |
perf trace: Use zalloc() to make sure all fields are zeroed in the syscalltbl constructor
In the past this wasn't needed as the libaudit based code would use just one field, and the alternative constructor would fill in all the fields, but now that even when using the libaudit based method we need the other fields, switch to zalloc() to make sure the other fields are zeroed at instantiation time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
db6b8cc891 |
perf trace: Remove union from syscalltbl, all the fields are needed
When we moved to a syscalltbl generated from the kernel syscall tables (arch/..../syscall*.tbl) the idea was to either use it, when having the generator (e.g. tools/perf/arch/x86/entry/syscalls/syscalltbl.sh), or falling back to the previous audit-libs based way of mapping syscall ids to strings and the other way around. At first we just needed the audit_detect_machine() return to then use it to the str->id/id->str, or the other fields for the now used by default in the most well developed arches method of using the syscall table generator. The problem is that then the libaudit code fell into disrepair, and architectures where it is the method used are not working. Now, with NO_SYSCALL_TABLE=1 being possible to pass on the make command line we can automate the testing of that method even on x86-64, arm64, etc. And doing it I noted that we actually use fields in both entries in the union, oops, so ditch the union, as we need all those fields at the same time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
43de3869b5 |
perf build: Allow explicitely disabling the NO_SYSCALL_TABLE variable
This is useful to see if, on x86, the legacy libaudit still works, as it
is used in architectures that don't have the SYSCALL_TABLE logic and we
want to have it tested in 'make -C tools/perf/ build-test'.
E.g.:
Without having audit-libs-devel installed:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ OFF ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
<SNIP>
After installing it:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c'
diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000)
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
9b90d9734a |
perf build: Group the NO_SYSCALL_TABLE logic
To help in allowing to disable it from the make command line. Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200529155552.463-2-acme@kernel.org [ Fixed the logic for the filter part, it should be ifeq, not ifneq ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
David Ahern
|
7c741868ce |
selftests: Add torture tests to nexthop tests
Add Nik's torture tests as a new set to stress the replace and cleanup paths. Torture test created by Nikolay Aleksandrov and then I adapted to selftest and added IPv6 version. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Masami Hiramatsu
|
619ee76f5c |
selftests/ftrace: Return unsupported if no error_log file
Check whether error_log file exists in tracing/error_log testcase
and return UNSUPPORTED if no error_log file.
This can happen if we run the ftracetest on the older stable
kernel.
Fixes:
|
||
|
Masami Hiramatsu
|
8e923a2168 |
selftests/ftrace: Use printf for backslash included command
Since the built-in echo has different behavior in POSIX shell (dash) and bash, kprobe_syntax_errors.tc can fail on dash which interpret backslash escape automatically. To fix this issue, we explicitly use printf "%s" (not interpret backslash escapes) if the command string can include backslash. Reported-by: Liu Yiding <yidingx.liu@intel.com> Suggested-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Adrian Hunter
|
9b2d2066dd |
perf intel-pt: Refine kernel decoding only warning message
Stop the message displaying when user space is not being traced.
Example:
Prerequisites:
sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.068 MB perf.data ]
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
16b4b4e1a0 |
perf record: Respect --no-switch-events
Context switch events are added automatically by Intel PT and Coresight.
Make it possible to suppress them. That is useful for tracing the
scheduler without the disturbance that the switch event processing
creates.
Example:
Prerequisites:
$ which perf
~/bin/perf
$ sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
$ sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.938 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
572
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
0
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
b51640854d |
perf script: Fix --call-trace for Intel PT
Make process_attr() respect -F-ip, noting also that the condition in
process_attr() (callchain_param.record_mode != CALLCHAIN_NONE) is always
true so test the sample type directly.
Example:
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.033 MB perf.data ]
$ perf script --call-trace | head -5
uname 30992 [006] 41758.313696574: cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown] )
uname 30992 [006] 41758.313696907: _start 7f71792c4100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
uname 30992 [006] 41758.313699574: _dl_start 7f71792c4103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
uname 30992 [006] 41758.313699907: _dl_start 7f71792c4e18 _dl_start+0x28 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
uname 30992 [006] 41758.313701574: _dl_start 7f71792c5128 _dl_start+0x338 (/usr/lib/x86_64-linux-gnu/ld-2.31.so )
After:
$ perf script --call-trace | head -5
uname 30992 [006] 41758.313696574: cbr: 42 freq: 4219 MHz (156%)
uname 30992 [006] 41758.313696907: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start
uname 30992 [006] 41758.313699574: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 30992 [006] 41758.313699907: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 30992 [006] 41758.313701574: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
Fixes: f288e8e1aa4f ("perf script: Enable IP fields for callchains")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200527180250.16723-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
87cf836073 |
perf evlist: Disable 'immediate' events last
Events marked as 'immediate' are started before other events to ensure that there is context at the start of the main tracing events. The same is true at the end of tracing, so disable 'immediate' events after other events. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200512121922.8997-11-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
61f82e3fb6 |
perf kcore_copy: Fix module map when there are no modules loaded
In the absence of any modules, no "modules" map is created, but there are other executable pages to map, due to eBPF JIT, kprobe or ftrace. Map them by recognizing that the first "module" symbol is not necessarily from a module, and adjust the map accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Nick Gasson
|
0bdf31811b |
perf jvmti: Fix demangling Java symbols
For a Java method signature like:
Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V
The demangler produces:
void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int)
The arguments should be (java.lang.String, int, int) but the demangler
interprets the "S" in String as the type code for "short". Correct this
and two other minor things:
- There is no "bool" type in Java, should be "boolean".
- The demangler prepends "class" to every Java class name. This is not
standard Java syntax and it wastes a lot of horizontal space if the
signature is long. Remove this as there isn't any ambiguity between
class names and primitives.
Committer notes:
This was split from a larger patch that also added a java demangler
'perf test' entry, that, before this patch shows the error being fixed
by it:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
After applying this patch:
$ perf test java
65: Demangle Java : Ok
$
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Nick Gasson
|
525c821de0 |
perf tests: Add test for the java demangler
Split from a larger patch that was also fixing a problem with the java demangler, so, before applying that patch we see: $ perf test java 65: Demangle Java : FAILED! $ perf test -v java 65: Demangle Java : --- start --- test child forked, pid 307264 FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[]) FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int) FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence) FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int) FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>() test child finished with -1 ---- end ---- Demangle Java: FAILED! $ Next patch should fix this. Signed-off-by: Nick Gasson <nick.gasson@arm.com> Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Nick Gasson
|
959f8ed4c1 |
perf jvmti: Do not report error when missing debug information
If the Java sources are compiled with -g:none to disable debug information the perf JVMTI plugin reports a lot of errors like: java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION Instead if GetLineNumberTable returns JVMTI_ERROR_ABSENT_INFORMATION simply skip emitting line number information for that method. Unlike the previous patch these errors don't affect the jitdump generation, they just generate a lot of noise. Similarly for native methods which also don't have line tables. Signed-off-by: Nick Gasson <nick.gasson@arm.com> Reviewed-by: Ian Rogers <irogers@google.com> Tested-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200427061520.24905-3-nick.gasson@arm.com [ Moved || operator to the end of the line, not at the start of 2nd if condition ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Nick Gasson
|
953e92402a |
perf jvmti: Fix jitdump for methods without debug info
If a Java class is compiled with -g:none to omit debug information, the
JVMTI plugin won't write jitdump entries for any method in this class
and prints a lot of errors like:
java: GetSourceFileName failed with JVMTI_ERROR_ABSENT_INFORMATION
The call to GetSourceFileName is used to derive the file name `fn`, but
this value is not actually used since commit
|
||
|
Adrian Hunter
|
85afd35575 |
perf symbols: Fix debuginfo search for Ubuntu
Reportedly, from 19.10 Ubuntu has begun mixing up the location of some
debug symbol files, putting files expected to be in
/usr/lib/debug/usr/lib into /usr/lib/debug/lib instead. Fix by adding
another dso_binary_type.
Example on Ubuntu 20.04
Before:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data ]
$ perf script --call-trace | head -5
uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%)
uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4100
uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4df0
uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc4e18
uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) 7f1e71cc5128
After:
$ perf script --call-trace | head -5
uname 14003 [005] 15321.764958566: cbr: 42 freq: 4219 MHz (156%)
uname 14003 [005] 15321.764958566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _start
uname 14003 [005] 15321.764961566: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 14003 [005] 15321.764961900: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
uname 14003 [005] 15321.764963233: (/usr/lib/x86_64-linux-gnu/ld-2.31.so ) _dl_start
Reported-by: Travis Downs <travis.downs@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200526155207.9172-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Jiri Olsa
|
1244a32736 |
perf parse: Add 'struct parse_events_state' pointer to scanner
We need to pass more data to the scanner so let's start with having it to take pointer to 'struct parse_events_state' object instead of just start token. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200524224219.234847-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
5f09ca5a14 |
perf stat: Do not pass avg to generic_metric
There's no need to pass the given evsel's count to metric data, because it will be pushed again within the following metric_events loop. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200524224219.234847-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
d685e6c1b8 |
perf tests: Consider subtests when searching for user specified tests
It's now possible to put subtest name as a test filter: $ perf test 'PMU event table sanity' 10: PMU events : 10.1: PMU event table sanity : Ok Committer testing: Before: $ perf test 'PMU event table sanity' $ After: $ perf test 'PMU event table sanity' 10: PMU events : 10.1: PMU event table sanity : Ok $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200524224219.234847-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
a90a1c54a6 |
perf list: Add metrics to command line usage
Before:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|event_glob]
After:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob]
Committer testing:
Before and after we get these outputs on a Lenovo t480s (i7-8650U):
# perf list metricgroup
List of pre-defined events (to be used in -e):
Metric Groups:
BrMispredicts
BrMispredicts_SMT
Branches
Cache_Misses
DSB
FLOPS
FLOPS_SMT
Fetch_BW
IcMiss
Instruction_Type
Memory_BW
Memory_Bound
Memory_Lat
No_group
PGO
Pipeline
Power
Retire
SMT
Summary
TLB
TLB_SMT
TopDownL1
TopDownL1_SMT
TopdownL1
TopdownL1_SMT
#
# perf list metric | head -11
Metrics:
Backend_Bound
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend]
Backend_Bound_SMT
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU]
Bad_Speculation
[This category represents fraction of slots wasted due to incorrect speculations]
Bad_Speculation_SMT
[This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU]
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200522064546.164259-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Andi Kleen
|
8c3e05c827 |
perf script: Don't force less for non tty output with --xed
--xed currently forces less. When piping the output to other scripts this can waste a lot of CPU time because less is rather slow. I've seen it using up a full core on its own in a pipeline. Only force less when the output is actually a terminal. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20200522020914.527564-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
e2ce1059b0 |
perf metricgroup: Remove unnecessary ',' from events
Remove unnecessary commas from events before they are parsed. This avoids ',' being echoed by parse-events.l. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200520182011.32236-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
05530a7921 |
perf metricgroup: Add options to not group or merge
Add --metric-no-group that causes all events within metrics to not be grouped. This can allow the event to get more time when multiplexed, but may also lower accuracy. Add --metric-no-merge option. By default events in different metrics may be shared if the group of events for one metric is the same or larger than that of the second. Sharing may increase or lower accuracy and so is now configurable. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200520182011.32236-7-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
2440689d62 |
perf metricgroup: Remove duped metric group events
A metric group contains multiple metrics. These metrics may use the same
events. If metrics use separate events then it leads to more
multiplexing and overall metric counts fail to sum to 100%.
Modify how metrics are associated with events so that if the events in
an earlier group satisfy the current metric, the same events are used.
A record of used events is kept and at the end of processing unnecessary
events are eliminated.
Before:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
920,211,343 uops_issued.any # 0.5 Backend_Bound (16.56%)
1,977,733,128 idq_uops_not_delivered.core (16.56%)
51,668,510 int_misc.recovery_cycles (16.56%)
732,305,692 uops_retired.retire_slots (16.56%)
1,497,621,849 cycles (16.56%)
721,098,274 uops_issued.any # 0.1 Bad_Speculation (16.79%)
1,332,681,791 cycles (16.79%)
552,475,482 uops_retired.retire_slots (16.79%)
47,708,340 int_misc.recovery_cycles (16.79%)
1,383,713,292 cycles
# 0.4 Frontend_Bound (16.76%)
2,013,757,701 idq_uops_not_delivered.core (16.76%)
1,373,363,790 cycles
# 0.1 Retiring (33.54%)
577,302,589 uops_retired.retire_slots (33.54%)
392,766,987 inst_retired.any # 0.3 IPC (50.24%)
1,351,873,350 cpu_clk_unhalted.thread (50.24%)
1,332,510,318 cycles
# 5330041272.0 SLOTS (49.90%)
1.006336145 seconds time elapsed
After:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
765,949,145 uops_issued.any # 0.1 Bad_Speculation
# 0.5 Backend_Bound (50.09%)
1,883,830,591 idq_uops_not_delivered.core # 0.3 Frontend_Bound (50.09%)
48,237,080 int_misc.recovery_cycles (50.09%)
581,798,385 uops_retired.retire_slots # 0.1 Retiring (50.09%)
1,361,628,527 cycles
# 5446514108.0 SLOTS (50.09%)
391,415,714 inst_retired.any # 0.3 IPC (49.91%)
1,336,486,781 cpu_clk_unhalted.thread (49.91%)
1.005469298 seconds time elapsed
Note: Bad_Speculation + Backend_Bound + Frontend_Bound + Retiring = 100%
after, where as before it is 110%. After there are 2 groups, whereas
before there are 6. After the cycles event appears once, before it
appeared 5 times.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Ian Rogers
|
6bf2102bec |
perf metricgroup: Order event groups by size
When adding event groups to the group list, insert them in size order. This performs an insertion sort on the group list. By placing the largest groups at the front of the group list it is possible to see if a larger group contains the same events as a later group. This can make the later group redundant - it can reuse the events from the large group. A later patch will add this sharing. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200520182011.32236-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
7f9eca51c1 |
perf metricgroup: Delay events string creation
Currently event groups are placed into groups_list at the same time as the events string containing the events is built. Separate these two operations and build the groups_list first, then the event string from the groups_list. This adds an ability to reorder the groups_list that will be used in a later patch. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200520182011.32236-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
908103991a |
perf metricgroup: Use early return in add_metric
Use early return in metricgroup__add_metric and try to make the intent of the returns more intention revealing. Suggested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200520182011.32236-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
4e21c13aca |
perf metricgroup: Always place duration_time last
If a metric contains the duration_time event then the event is placed outside of the metric's group of events. Rather than split the group, make it so the duration_time is immediately after the group. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200520182011.32236-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Ian Rogers
|
a159e2fe89 |
perf metricgroup: Free metric_events on error
Avoid a simple memory leak. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200508053629.210324-10-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Li Bin
|
fa99ce8282 |
perf util: Fix potential SEGFAULT in put_tracepoints_path error path
This patch fix potential segment fault triggered in put_tracepoints_path() when the address of the local variable 'path' be freed in error path of record_saved_cmdline. Signed-off-by: Li Bin <huawei.libin@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hongbo Yao <yaohongbo@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Xie XiuQi <xiexiuqi@huawei.com> Link: http://lore.kernel.org/lkml/20200521133218.30150-5-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Xie XiuQi
|
07e9a6f538 |
perf util: Fix memory leak of prefix_if_not_in
Need to free "str" before return when asprintf() failed to avoid memory leak. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hongbo Yao <yaohongbo@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |