Calling vha->hw->tgt.tgt_ops->free_cmd() from qlt_xmit_response() is wrong
since the command for which a response is sent must remain valid until the
SCSI target core calls .release_cmd(). It has been observed that the
following scenario triggers a kernel crash:
- qlt_xmit_response() calls qlt_check_reserve_free_req()
- qlt_check_reserve_free_req() returns -EAGAIN
- qlt_xmit_response() calls vha->hw->tgt.tgt_ops->free_cmd(cmd)
- transport_handle_queue_full() tries to retransmit the response
Fix this crash by reverting the patch that introduced it.
Link: https://lore.kernel.org/r/20210320232359.941-2-bvanassche@acm.org
Fixes: 0dcec41acb ("scsi: qla2xxx: Make sure that aborted commands are freed")
Cc: Quinn Tran <qutran@marvell.com>
Cc: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During MQ enablement of the ibmvfc driver ibmvfc_wait_for_ops() was
missed. This function is responsible for waiting on commands to complete
that match a certain criteria such as LUN or cancel key. The implementation
as is only scans the CRQ for events ignoring any sub-queues and as a result
will exit successfully without doing anything when operating in MQ
channelized mode.
Check the MQ and channel use flags to determine which queues are
applicable, and scan each queue accordingly. Note in MQ mode SCSI commands
are only issued down sub-queues and the CRQ is only used for driver
specific management commands. As such the CRQ events are ignored when
operating in MQ mode with channels.
Link: https://lore.kernel.org/r/20210319205029.312969-3-tyreld@linux.ibm.com
Fixes: 9000cb998b ("scsi: ibmvfc: Enable MQ and set reasonable defaults")
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For various EH activities the ibmvfc driver uses ibmvfc_wait_for_ops() to
wait for the completion of commands that match a given criteria be it
cancel key, or specific LUN. With recent changes commands are completed
outside the lock in bulk by removing them from the sent list and adding
them to a private completion list. This introduces a potential race in
ibmvfc_wait_for_ops() since the criteria for a command to be outstanding is
no longer simply being on the sent list, but instead not being on the free
list.
Avoid this race by scanning the entire command event pool and checking that
any matching command that ibmvfc needs to wait on is not already on the
free list.
Link: https://lore.kernel.org/r/20210319205029.312969-2-tyreld@linux.ibm.com
Fixes: 1f4a4a1950 ("scsi: ibmvfc: Complete commands outside the host/queue lock")
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
While Kepler does technically support 256x256 cursors, it turns out that
Kepler actually has some additional requirements for scanout surfaces that
we're not enforcing correctly, which aren't present on Maxwell and later.
Cursor surfaces must always use small pages (4K), and overlay surfaces must
always use large pages (128K).
Fixing this correctly though will take a bit more work: as we'll need to
add some code in prepare_fb() to move cursor FBs in large pages to small
pages, and vice-versa for overlay FBs. So until we have the time to do
that, just limit cursor surfaces to 128x128 - a size small enough to always
default to small pages.
This means small ovlys are still broken on Kepler, but it is extremely
unlikely anyone cares about those anyway :).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d3b2f0f792 ("drm/nouveau/kms/nv50-: Report max cursor size to userspace")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cited commit added a new attribute before the existing group reference
count attribute, thereby changing its value and breaking existing
applications on new kernels.
Before:
# psample -l
libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported
After:
# psample -l
Group Num Refcount Group Seq
1 1 0
Fix by restoring the value of the old attribute and remove the
misleading comments from the enumerator to avoid future bugs.
Cc: stable@vger.kernel.org
Fixes: d8bed686ab ("net: psample: Add tunnel support")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Adiel Bidani <adielb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This partially reverts commit 882213990d ("xen: fix p2m size in dom0
for disabled memory hotplug case")
There's no need to special case XEN_UNPOPULATED_ALLOC anymore in order
to correctly size the p2m. The generic memory hotplug option has
already been tied together with the Xen hotplug limit, so enabling
memory hotplug should already trigger a properly sized p2m on Xen PV.
Note that XEN_UNPOPULATED_ALLOC depends on ZONE_DEVICE which pulls in
MEMORY_HOTPLUG.
Leave the check added to __set_phys_to_machine and the adjusted
comment about EXTRA_MEM_RATIO.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210324122424.58685-3-roger.pau@citrix.com
[boris: fixed formatting issues]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The Xen memory hotplug limit should depend on the memory hotplug
generic option, rather than the Xen balloon configuration. It's
possible to have a kernel with generic memory hotplug enabled, but
without Xen balloon enabled, at which point memory hotplug won't work
correctly due to the size limitation of the p2m.
Rename the option to XEN_MEMORY_HOTPLUG_LIMIT since it's no longer
tied to ballooning.
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210324122424.58685-2-roger.pau@citrix.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Hi All,
Here is v4 of my series to rework the arizona codec jack-detect support
to use the snd_soc_jack helpers instead of direct extcon reporting.
As discussed before here is a resend rebased on 5.12-rc2, making sure that
all patches this depends on are in place.
Lee, can you pick-up patches 1-6 through the MFD tree and then send a
pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC
tree ?
Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi
for merging these through the MFD tree.
Here is some more generic info on this series from the previous
cover-letter:
This is done by reworking the extcon driver into an arizona-jackdet
library and then modifying the codec drivers to use that directly,
replacing the old separate extcon child-devices and extcon-driver.
This brings the arizona-codec jack-detect handling inline with how
all other ASoC codec driver do this. This was developed and tested on
a Lenovo Yoga Tablet 1051L with a WM5102 codec.
This was also tested by Charles Keepax, one of the Cirrus Codec folks.
Regards,
Hans
Hans de Goede (13):
mfd: arizona: Drop arizona-extcon cells
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack
has been unplugged
extcon: arizona: Fix various races on driver unbind
extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol")
call
extcon: arizona: Always use pm_runtime_get_sync() when we need the
device to be awake
ASoC/extcon: arizona: Move arizona jack code to
sound/soc/codecs/arizona-jack.c
ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv
ASoC: arizona-jack: Use arizona->dev for runtime-pm
ASoC: arizona-jack: convert into a helper library for codec drivers
ASoC: arizona-jack: Use snd_soc_jack to report jack events
ASoC: arizona-jack: Cleanup logging
ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use
the new jack library
ASoC: Intel: bytcr_wm5102: Add jack detect support
MAINTAINERS | 3 +-
drivers/extcon/Kconfig | 8 -
drivers/extcon/Makefile | 1 -
drivers/mfd/arizona-core.c | 20 -
sound/soc/codecs/Makefile | 2 +-
.../soc/codecs/arizona-jack.c | 577 +++++++-----------
sound/soc/codecs/arizona.h | 44 ++
sound/soc/codecs/wm5102.c | 12 +-
sound/soc/codecs/wm5110.c | 12 +-
sound/soc/codecs/wm8997.c | 14 +-
sound/soc/codecs/wm8998.c | 9 +
sound/soc/intel/boards/bytcr_wm5102.c | 28 +-
12 files changed, 325 insertions(+), 405 deletions(-)
rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%)
--
2.30.1
Add jack detect support by creating a jack and calling
snd_soc_component_set_jack to register the created jack
with the codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-14-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make all arizona codec drivers for which drivers/mfd/arizona-core.c used
to instantiate a "arizona-extcon" child-device use the new arizona-jack.c
library for jack-detection.
This has been tested on a Lenovo Yoga Tablet 2 1051L with a WM5102 codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-13-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cleanup the use of dev_foo functions used for logging:
1. Many of these are unnecessarily split over multiple lines
2. Use dev_err_probe() in cases where we might get a -EPROBE_DEFER
return value
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-12-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the snd_soc_jack code to report jack events, instead of using extcon
for reporting the cable-type + an input_dev for reporting the button
presses.
The snd_soc_jack code will report the cable-type through both input_dev
events and through ALSA controls and the button-presses through input_dev
events.
Note that this means that when the codec drivers are moved over to use
the new arizona-jack.c library code instead of having a separate MFD
extcon cell with the extcon-arizona.c driver, we will no longer report
extcon events to userspace for cable-type changes. This should not be
a problem since "standard" Linux distro userspace does not (and has
never) used the extcon class interface for this. Android does have
support for the extcon class interface, but that was introduced in
the same release as support for input_dev cable-type events, so this
should not be a problem for Android either.
Note this also reduces ARIZONA_MAX_MICD_RANGE from 8 to 6, this is
ok to do since this info is always provided through pdata (or defaults)
and cannot be overridden from devicetree. All in-kernel users of the
pdata (and the fallback defaults) define 6 or less buttons/ranges.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-11-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the arizona extcon driver into a helper library for direct use
from the arizona codec-drivers, rather then being bound to a separate
MFD cell.
Note the probe (and remove) sequence is split into 2 parts:
1. The arizona_jack_codec_dev_probe() function inits a bunch of
jack-detect specific variables in struct arizona_priv and tries to get
a number of resources where getting them may fail with -EPROBE_DEFER.
2. Then once the machine driver has create a snd_sock_jack through
snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on
the codec component, which will call the new arizona_jack_set_jack(),
which sets up jack-detection and requests the IRQs.
This split is necessary, because the IRQ handlers need access to the
arizona->dapm pointer and the snd_sock_jack which are not available
when the codec-driver's probe function runs.
Note this requires that machine-drivers for codecs which are converted
to use the new helper functions from arizona-jack.c are modified to
create a snd_soc_jack through snd_soc_card_jack_new() and register
this jack with the codec through snd_soc_component_set_jack().
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers for MFD child-devices such as the arizona codec drivers
and the arizona-extcon driver can choose to either make
runtime_pm_get/_put calls on their own child-device, which will
then be propagated to their parent; or they can make them directly
on their MFD parent-device.
The arizona-extcon code was using runtime_pm_get/_put calls on
its own child-device where as the codec drivers are using
runtime_pm_get/_put calls on their parent.
The arizona-extcon MFD cell/child-device has been removed and this
commit is part of refactoring the arizona-extcon code into a library
to be used directly from the codec drivers.
Specifically this commit moves the code over to make
runtime_pm_get/_put calls on the parent device (on arizona->dev)
bringing the code inline with how the codec drivers do this.
Note this also removes the pm_runtime_enable/_disable calls
as pm_runtime support has already been enabled on the parent-device
by the arizona MFD driver.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report
jack state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-9-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the jack-detect variables from struct arizona_extcon_info to
struct arizona_priv.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-8-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with ipg_clk clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with ipg clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with mem clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with mem clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with core clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with bus clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc points out an incorrect enum assignment:
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c: In function 'chcr_ktls_cpl_set_tcb_rpl':
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:684:22: warning: implicit conversion from 'enum <anonymous>' to 'enum ch_ktls_open_state' [-Wenum-conversion]
This appears harmless, and should apparently use 'CH_KTLS_OPEN_SUCCESS'
instead of 'false', with the same value '0'.
Fixes: efca3878a5 ("ch_ktls: Issue if connection offload fails")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the error return path when lfs fails to allocate is not free'ing
the memory allocated to buf. Fix this by adding the missing kfree.
Addresses-Coverity: ("Resource leak")
Fixes: f788409714 ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.
adj *= scaled_ppm;
This patch is to resolve it by using mul_u64_u64_div_u64().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
window and one for a long standing problem that only popped up now that
eMMC is being used.
-----BEGIN PGP SIGNATURE-----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=e9G9
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three fixes for the Qualcomm clk driver: two for regressions this
merge window and one for a long-standing problem that only popped up
now that eMMC is being used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk
clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division
clk: qcom: rpmh: Update the XO clock source for SC7280
Summary:
- dell-wmi-sysman: A set of probe-error-exit-handling fixes to fix some systems
which advertise the WMI GUIDs, but are not compatible, not booting
- intel-vbtn/intel-hid: Misc. bugfixes
- intel_pmc: Bug-fixes + a quirk to lower suspend power-consumption on Tiger Lake
- thinkpad_acpi: Misc. bugfixes
The following is an automated git shortlog grouped by driver:
dell-wmi-sysman:
- Cleanup create_attributes_level_sysfs_files()
- Make sysman_init() return -ENODEV of the interfaces are not found
- Cleanup sysman_init() error-exit handling
- Fix release_attributes_data() getting called twice on init_bios_attributes() failure
- Make it safe to call exit_foo_attributes() multiple times
- Fix possible NULL pointer deref on exit
- Fix crash caused by calling kset_unregister twice
intel-hid:
- Support Lenovo ThinkPad X1 Tablet Gen 2
intel-vbtn:
- Stop reporting SW_DOCK events
intel_pmc_core:
- Ignore GBE LTR on Tiger Lake platforms
- Update Kconfig
intel_pmt_class:
- Initial resource to 0
intel_pmt_crashlog:
- Fix incorrect macros
thinkpad_acpi:
- Disable DYTC CQL mode around switching to balanced mode
- Allow the FnLock LED to change state
- check dytc version for lapmode sysfs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmBbbL0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yYEgf/dWwTip21gYoi02mdsHsPduaL0Mtu
grcZpnRSEuWvgl5P26zttmLjAK4rTyySePVBWsxDwH/4qBqY2DCicSQfeQke2/9c
PJU3i8zXTQxlBUWFrjM8vqFKdTypFXJwpdoBGQD3JJAh8LcSQj5xkhhDQVJYIXLQ
HIxVM44gPLZc/lHOFGUEtREc2/k2/A09pER6udvVGxSy/Vz1w646G3u9f5edi1jz
jX5HIlEtEYpZ55E8bQSUcMIVpiv6HLAu5qQXQ+1xeQXXwM7mM6gRpG8Qr9Cy70Aq
us0AA5AjYd4IudlgFtUQ7NOB5YYEs2WHiFx4+ck0DSE7CMzcamnUNNp7Tg==
=ybep
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
"A set of bug-fixes and some model specific quirks.
Summary:
- dell-wmi-sysman: A set of probe-error-exit-handling fixes to fix
some systems which advertise the WMI GUIDs, but are not compatible,
not booting
- intel-vbtn/intel-hid: Misc. bugfixes
- intel_pmc: Bug-fixes + a quirk to lower suspend power-consumption
on Tiger Lake
- thinkpad_acpi: misc bugfixes"
* tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms
platform/x86: intel_pmc_core: Update Kconfig
platform/x86: intel_pmt_crashlog: Fix incorrect macros
platform/x86: intel_pmt_class: Initial resource to 0
platform/x86: intel-vbtn: Stop reporting SW_DOCK events
platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files()
platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found
platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling
platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure
platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times
platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit
platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice
platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode
platform/x86: thinkpad_acpi: Allow the FnLock LED to change state
platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs
platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2
Christoph reported that we'll likely trigger the WARN_ON_ONCE() checking
that we're not submitting a bvec with REQ_OP_ZONE_APPEND in
bio_iov_iter_get_pages() some time ago using zoned btrfs, but I couldn't
reproduce it back then.
Now Naohiro was able to trigger the bug as well with xfstests generic/095
on a zoned btrfs.
There is nothing that prevents bvec submissions via REQ_OP_ZONE_APPEND if
the hardware's zone append limit is met.
Reported-by: Naohiro Aota <naohiro.aota@wdc.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/10bd414d9326c90cd69029077db63b363854eee5.1616600835.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=/IaF
-----END PGP SIGNATURE-----
Merge tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull cachefiles and afs fixes from David Howells:
"Fixes from Matthew Wilcox for page waiting-related issues in
cachefiles and afs as extracted from his folio series[1]:
- In cachefiles, remove the use of the wait_bit_key struct to access
something that's actually in wait_page_key format. The proper
struct is now available in the header, so that should be used
instead.
- Add a proper wait function for waiting killably on the page
writeback flag. This includes a recent bugfix[2] that's not in the
afs code.
- In afs, use the function added in (2) rather than using
wait_on_page_bit_killable() which doesn't provide the
aforementioned bugfix"
Link: https://lore.kernel.org/r/20210320054104.1300774-1-willy@infradead.org[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [2]
Link: https://lore.kernel.org/r/20210323120829.GC1719932@casper.infradead.org/ # v1
* tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use wait_on_page_writeback_killable
mm/writeback: Add wait_on_page_writeback_killable
fs/cachefiles: Remove wait_bit_key layout dependency
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some time now the 'perf test 42: BPF filter' returns an error on bpf
relocation subtest, at least on x86 and s390. This is caused by
d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
which introduces support for global variables in eBPF programs.
Perf test 42.4 checks that the eBPF relocation fails when the eBPF program
contains a global variable. It returns OK when the eBPF program
could not be loaded and FAILED otherwise.
With above commit the test logic for the eBPF relocation is obsolete.
The loading of the eBPF now succeeds and the test always shows FAILED.
This patch removes the sub test completely.
Also a lot of eBPF program testing is done in the eBPF test suite,
it also contains tests for global variables.
Output before:
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Failed
#
Output after:
# ./perf test -F 42
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210324083734.1953123-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should return correctly and warn in both daemon_session__kill() and
daemon__kill() after we tried everything to kill sessions. The current
code will keep on looping and waiting.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320221013.1619613-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we don't process SIGCHLD before another comes, we will see just one
SIGCHLD as a result. In this case current code will miss exit
notification for a session and wait forever.
Adding extra waitpid check for all sessions when SIGCHLD is received, to
make sure we don't miss any session exit.
Also fix close condition for signal_fd.
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320221013.1619613-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To optimize some task deferring it until runtime resume unless someone
holds a runtime PM reference (because in this case the task can be done
w/o the overhead of runtime resume), we have to use the runtime PM
get-if-active logic: If the runtime PM usage count is 0 (and so
get-if-in-use would return false) the runtime suspend handler is not
necessarily called yet (it could be just pending), so the device is not
necessarily powered down, and so the runtime resume handler is not
guaranteed to be called.
The fence revocation depends on the above deferral, so add a
get-if-active helper and use it during fence revocation.
v2:
- Add code comment explaining the fence reg programming deferral logic
to i915_vma_revoke_fence(). (Chris)
- Add Cc: stable and Fixes: tags. (Chris)
- Fix the function docbook comment.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 181df2d458 ("drm/i915: Take rpm wakelock for releasing the fence on unbind")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com
(cherry picked from commit 9d58aa4629)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
WARNING: CPU: 1 PID: 27907 at fs/io_uring.c:7147 io_sq_thread_park+0xb5/0xd0 fs/io_uring.c:7147
CPU: 1 PID: 27907 Comm: iou-sqp-27905 Not tainted 5.12.0-rc4-syzkaller #0
RIP: 0010:io_sq_thread_park+0xb5/0xd0 fs/io_uring.c:7147
Call Trace:
io_ring_ctx_wait_and_kill+0x214/0x700 fs/io_uring.c:8619
io_uring_release+0x3e/0x50 fs/io_uring.c:8646
__fput+0x288/0x920 fs/file_table.c:280
task_work_run+0xdd/0x1a0 kernel/task_work.c:140
io_run_task_work fs/io_uring.c:2238 [inline]
io_run_task_work fs/io_uring.c:2228 [inline]
io_uring_try_cancel_requests+0x8ec/0xc60 fs/io_uring.c:8770
io_uring_cancel_sqpoll+0x1cf/0x290 fs/io_uring.c:8974
io_sqpoll_cancel_cb+0x87/0xb0 fs/io_uring.c:8907
io_run_task_work_head+0x58/0xb0 fs/io_uring.c:1961
io_sq_thread+0x3e2/0x18d0 fs/io_uring.c:6763
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
May happen that last ctx ref is killed in io_uring_cancel_sqpoll(), so
fput callback (i.e. io_uring_release()) is enqueued through task_work,
and run by same cancellation. As it's deeply nested we can't do parking
or taking sqd->lock there, because its state is unclear. So avoid
ctx ejection from sqd list from io_ring_ctx_wait_and_kill() and do it
in a clear context in io_ring_exit_work().
Fixes: f6d54255f4 ("io_uring: halt SQO submission on ctx exit")
Reported-by: syzbot+e3a3f84f5cecf61f0583@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e90df88b8ff2cabb14a7534601d35d62ab4cb8c7.1616496707.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 098214999c added fetching of the AUX_DPHY register
values from the vbios, but it also changed the default values
in the case when there are no values in the vbios. This causes
problems with displays with high refresh rates. To fix this,
switch back to the original default value for AUX_DPHY_TX_CONTROL.
Fixes: 098214999c ("drm/amd/display: Read VBIOS Golden Settings Tbl")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Igor Kravchenko <Igor.Kravchenko@amd.com>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: stable@vger.kernel.org
As explained in this discussion:
https://lore.kernel.org/netdev/20210117193009.io3nungdwuzmo5f7@skbuf/
the switchdev notifiers for FDB entries managed to have a zero-day bug.
The bridge would not say that this entry is local:
ip link add br0 type bridge
ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master local
and the switchdev driver would be more than happy to offload it as a
normal static FDB entry. This is despite the fact that 'local' and
non-'local' entries have completely opposite directions: a local entry
is locally terminated and not forwarded, whereas a static entry is
forwarded and not locally terminated. So, for example, DSA would install
this entry on swp0 instead of installing it on the CPU port as it should.
There is an even sadder part, which is that the 'local' flag is implicit
if 'static' is not specified, meaning that this command produces the
same result of adding a 'local' entry:
bridge fdb add dev swp0 00:01:02:03:04:05 master
I've updated the man pages for 'bridge', and after reading it now, it
should be pretty clear to any user that the commands above were broken
and should have never resulted in the 00:01:02:03:04:05 address being
forwarded (this behavior is coherent with non-switchdev interfaces):
https://patchwork.kernel.org/project/netdevbpf/cover/20210211104502.2081443-1-olteanv@gmail.com/
If you're a user reading this and this is what you want, just use:
bridge fdb add dev swp0 00:01:02:03:04:05 master static
Because switchdev should have given drivers the means from day one to
classify FDB entries as local/non-local, but didn't, it means that all
drivers are currently broken. So we can just as well omit the switchdev
notifications for local FDB entries, which is exactly what this patch
does to close the bug in stable trees. For further development work
where drivers might want to trap the local FDB entries to the host, we
can add a 'bool is_local' to br_switchdev_fdb_call_notifiers(), and
selectively make drivers act upon that bit, while all the others ignore
those entries if the 'is_local' bit is set.
Fixes: 6b26b51b1d ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Invalid detection works with two distinct moments: act_ct tries to find
a conntrack entry and set post_ct true, indicating that that was
attempted. Then, when flow dissector tries to dissect CT info and no
entry is there, it knows that it was tried and no entry was found, and
synthesizes/sets
key->ct_state = TCA_FLOWER_KEY_CT_FLAGS_TRACKED |
TCA_FLOWER_KEY_CT_FLAGS_INVALID;
mimicing what OVS does.
OVS has this a bit more streamlined, as it recomputes the key after
trying to find a conntrack entry for it.
Issue here is, when we have 'tc action ct clear', it didn't clear
post_ct, causing a subsequent match on 'ct_state -trk' to fail, due to
the above. The fix, thus, is to clear it.
Reproducer rules:
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 0 \
protocol ip flower ip_proto tcp ct_state -trk \
action ct zone 1 pipe \
action goto chain 2
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 2 \
protocol ip flower \
action ct clear pipe \
action goto chain 4
tc filter add dev enp130s0f0np0_0 ingress prio 1 chain 4 \
protocol ip flower ct_state -trk \
action mirred egress redirect dev enp130s0f1np1_0
With the fix, the 3rd rule matches, like it does with OVS kernel
datapath.
Fixes: 7baf2429a1 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.
Fixes: 5ef9998c96 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
