Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Trivial fix to spelling mistake in netdev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a number of sparse warnings of the form:
drivers/staging/ks7010/ks_hostif.c:2187:29:
warning: incorrect type in assignment (different base types)
generated when storing little-endian data in variables
that do not have a specified endianness.
Signed-off-by: Perry Hooker <perry.hooker@gmail.com>
Reviewed-By: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase variable name with underscores to comply
with the standard kernel coding style.
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase local variables' name with underscores to comply
with the standard kernel coding style.
Changed:
- LinkSpeed
- TransmittedFrameCount
- ReceivedFragmentCount
- FailedCount
- FCSErrorCount
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Target device is little endian. Host interface data structures used
for building frames to pass to target device should use little endian
data types. All u32 structure members in ks_hostif.h need to be
changed to __le32.
Change all u16 data types in host interface structures to be
__le32.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Target device is little endian. Host interface data structures used
for building frames to pass to target device should use little endian
data types. All u16 structure members in ks_hostif.h need to be
changed to __le16, Sparse can then be used to make sure we update all
code that touches these data.
Change all u16 data types in host interface structures to be
__le16. Update all code that touches modified data types. Check using
Sparse.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse emits warning: cast to restricted __be16. EAP header uses
network byte order. The structures used to describe it should use
__beXX data types.
Change data type unsigned short -> __be16.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase association_request_t and association_response_t
struct field names with underscores to comply with the standard kernel
coding style.
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase variable name with underscores to comply
with the standard kernel coding style.
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase struct field names with underscores to comply
with the standard kernel coding style.
Changed:
- maxDuration
- durRemaining
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase struct field names with underscores to comply
with the standard kernel coding style.
Changed:
- FhParms_t
- DsParms_t
- CfParms_t
- IbssParms_t
- ErpParams_t
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase struct field names with underscores to comply
with the standard kernel coding style.
Changed:
- dwellTime
- hopSet
- hopPattern
- hopIndex
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace CamelCase fields of struct with underscores to comply
with the standard kernel coding style
Signed-off-by: Janusz Lisiecki <janusz.lisiecki@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse spits out a warnings about __le16 and unsigned short assignment.
Change the type of size and event members of struct hostif_hdr
to __le16 and correct conversion to the proper cpu type.
Signed-off-by: Cezary Gapinski <gapalinux@gmail.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: Avoid line continuations in quoted strings.
Remove line continuations - split strings using quotes.
Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver header declares enumeration types without tags. Using
informative tags makes the code easier to understand and
eliminates the need to comment the enum.
Add tags to enumeration types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver uses preprocessor directives to define multicast filter
constants. These can be defined using an enumeration type. Doing so
adds to the readability and gives the assists the compiler.
Add enumeration type multicast_filter_type to replace preprocessor
defined constants.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Macro includes commented out code. Removing dead code line enables
braces to be removed. Macro is easier to read if the code is clean.
Clean up macro ps_confirm_wait_inc.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inside loop, code block is guarded with an 'if' statement. Instead of
guarding the block we can invert the 'if' statement conditional and
continue the loop. Doing so allows subsequent code indentation to be
reduced and aids the readability of the code.
Invert 'if' statement conditional, continue loop if new conditional
evaluates to true. Reduce subsequent code indentation level. Do not
change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The returned pointer from netdev_priv() (void *) does not need to be
cast.
Remove unnecessary cast of void * returned by netdev_priv().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver currently uses abbreviations 'mgt' and 'mngmt' for
'management'. Also 'power' is sometimes abbreviated to 'pow' and other
times not. It makes the code easier to read and easier to modify if
one abbreviation is used throughout the driver. 'mgmt' is widely
accepted as an abbreviation of 'management'. 'power' can be spelled
out in full, the extra two characters aids readability without an
excessive cost.
Make abbreviation of 'management' uniform across the driver, function
names, preprocessor defined constants, and enumeration types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver uses preprocessor directives to define SLP_ASLEEP and
SLP_ACTIVE. These can be defined using an enumeration type. Doing so
adds to the readability and gives the usual compiler benefits of
having an enum. Functions that currently accept integer types can now
use the new enumeration type, further aiding readability.
Add enumeration type sleep_mode_type. Update code that handles sleep
mode to use the new enumeration type.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Host interface connection status is handled using a 32 bit type. Top
byte is used as for FORCE_DISCONNECT status, low bits are used for
connect/disconnect status. Driver masks and checks integers to
ascertain status. If functions are defined to do the masking and
equality check then the details of how the status integer is used are
abstracted away. This makes the code easier to read. Also future
updates to the status handling will be easier because the code is in
one place.
Driver currently uses the CONNECT_STATUS and DISCONNECT_STATUS as
values, as apposed to opaque values. Because of this driver code
checks for equality with CONNECT_STATUS and DISCONNECT_STATUS as
apposed to negating a single check (ie 'foo != CONNECT_STATUS). In
order to maintain the current functionality we define two separate
functions is_connect_status() and is_disconnect_status().
Add functions to abstract the status integer check. Update all sites
that do the check manually to use the newly defined functions.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver contains duplicate code. Host interface has numerous request
functions which allocate memory for a request header. Each request
header is different but all contain, as the first member, a hostif_hdr
structure. This structure has size and event members which need to be
set. By defining a helper function to allocate the memory and set the
initial hostif_hdr members code duplication is reduced.
Add function to allocate memory for a host interface request. Set
'size' and 'event' members. Remove duplicate code using newly defined
function.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory allocation code contains unneeded debug statements, failed
kmalloc() calls typically do not require a debug message. Introduction
of a local 'size' variable allows kmalloc() call to be marginally
cleaner, still uses magic numbers but these require a more substantial
fix. Moving the magic numbers onto a single line opens the way for
further refactoring.
Clean memory allocation code, remove debug statements.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current switch statement has duplicate code in branches. This code can
be put after the switch statement so as to remove the duplication.
Move code to after switch statement, remove duplicate code. Make error
branch return so as not to execute the moved code block. Do not change
the program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver includes magic numbers. Defining constants or using existing
constants aids the readability of the code.
Magic number '12' is used for two ethernet addresses (6 bytes
each). ETH_ALEN is already defined within the kernel to 6. We can us
the expression '2 * ETH_ALEN' to make this code explicit.
Magic number '20' refers to the data size, in bytes, of a struct
ether_hdr (described in eap_packet.h). We can define a constant for
this purpose, making the code explicit and easier to read.
Define constant. Remove magic numbers, using newly defined constant
and/or expression using existing kernel constant.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, after allocating an sk_buff, driver fills the sk_buff
within code block guarded by a NULL check on the sk_buff. If a NULL
check is done immediately after the allocation, and code returns on
error, then the subsequent code need not be guarded and the level of
indentation may be reduced. This aids the readability of the code and
makes explicit the error path.
Check for NULL directly after allocating the sk_buff, return if
allocation fails. Reduce indentation of subsequent code. Do not change
the program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code declares and assigns to a local variable that is never used, it
can be safely removed.
Remove unused local variable.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently source and destination ethernet addresses are checked twice,
once in hostif_data_indication() and then again in
hostif_data_indication_wpa(). The second of these functions is called
from the first right after the address check is done. This check is a
duplicate and is unnecessary.
Remove unnecessary duplicate address check.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver SDIO code uses helper functions to do IO to the SDIO
device. Current helpers handle IO of a single byte as well as
multi-byte. Driver predominately uses single byte IO. If the
common case is made simple it simplifies the whole driver. The common
case can be made simple by splitting the multi-byte and single byte
calls into separate functions, i.e 4 functions in total, read single
byte, read multi-byte, write single byte, write multi-byte.
Also, we need to handle the debug code. Currently debug calls after
read/write fail access the IO buffer. This buffer, at best, does not hold
useful data on the error path, at worst is uninitialized and holds
garbage.
Split read/write helper functions into two functions each, one for
single byte IO and one for multi-byte IO. Fix all call sites. Do not
change the program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: please, no space before tabs.
Remove space before tabs.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
goto label includes 'err_' suffix but is executed on non-error paths.
Remove err_ suffix from goto label.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SDIO code currently has a number of unneeded comments. Following
kernel coding style we do not need extraneous comments, especially on
code where it is clear what is being done. Spelling typos can be
fixed.
Remove unnecessary comments, fix typos in comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ks_sdio_card structure description does not have a kernel doc format
comment.
Add kernel doc format comment to struct ks_sdio_card.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently driver uses a hardware information struct description to
group some SDIO related functionality (work, work queue, sdio private
data pointer). This structure is then embedded in the device private
data structure. Having nested structures described in different header
files means that to view the device private data programmers must open
two header files. This structure could be embedded anonymously in the
device private data and achieve the same result (grouping of function
specific to SDIO) without the need to open multiple headers. However,
the SDIO private data structure already has various different data and
pointers, adding the embedded structure adds little extra meaning and
lengthens all the dereferences throughout the driver, often meaning
addition line breaks and braces. We can increase readability and
reduce code complexity by moving the hardware information data and
pointers to directly be within the device private data structure
description.
While preparing for this refactoring it was noted that the identifier
currently used for the delayed work is 'rw_wq', this is confusing
since the 'wq' suffix typically means 'work queue'. This identifier
would be more meaningful if it used the suffix 'dwork' as does the
declaration of queue_delayed_work() (include/linux/workqueue.h).
The identifier for the work queue is currently 'ks7010sdio_wq'. This
identifier can be shortened without loss of meaning because there is
only one work queue within the driver. Identifier 'wq' is typical
within in-tree driver code and aptly describes the pointer.
Current pointer to the SDIO private data is identified by 'sdio_card',
this is sufficiently meaningful from within the hw_info structure but
once the hw_info_t structure is removed the pointer would be better to
have a prefix appended to it to retain the prior level of meaning.
Move members from struct hw_info_t to struct ks_wlan_private.
Rename identifiers;
struct delayed_work pointer 'rw_wq' to 'rw_dwork'.
struct workqueue_struct pointer 'ks7010sdio_wq' to 'wq'.
struct ks_sdio_card pointer 'sdio_card' to 'ks_sdio_card'.
Remove structure description hw_info_t. Fix init/destroy calls. Fix
all call sites, SDIO private data access calls, and queuing calls.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently a pointer to the tasklet_struct used for bottom half
processing on the receive path is within the hw_info_t structure. This
structure is then embedded in the device private data
structure. Having the tasklet_struct nested does not add meaning to
the device private data, device private data already (and typically)
has various data relating to the device, there is no real need to
separate the tasklet_struct to a SDIO specific structure. While not
adding allot of extra meaning having the nested structure means the
programmer must open two header files to read the description of the
device private data, the code would be easier to read if the device
private data struct description was not spread over two files.
Move tasklet_struct out of sdio header file and into the device
private data structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct work_struct uses identifier ks_wlan_wakeup_task, this is
confusing because the 'task' suffix implies that this is a
tasklet_struct instead of a work struct. Suffix 'work' would be more
clear. The code would be easier to read if it followed the principle
of least surprise and used the 'work' suffix for a work_struct
identifier.
Rename work_struct structure 'ks_wlan_wakeup_task' to 'wakeup_work'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SDIO header file does not use kernel doc format struct
comments. Adding them aids readability and enables documentation to be
built from the source code. Other comments may be tidied up as we do this.
Add kernel format struct comments. Tidy up comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
complete_handler() takes void * types as parameters. void * parameters are then
cast to struct types. Call sites for this function either pass in NULL
or pointers to the struct types cast to void *. This casting is
unnecessary and can be removed.
Struct tx_device_buffer (which contains a pointer member to the
complete_handler() function) has as member 'ks_wlan_priv *priv' this is
unnecessary, we always have a pointer to this struct there is no need
to store it here.
The complete_handler can be more clearly defined by using struct
pointer types instead of void * types. The code is currently
unnecessarily complex, storing and passing extraneous pointer
parameters.
Remove unnecessary parameters, unnecessary casting to/from 'void
*'. Fix all call sites involving complete_handler().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Header has multiple constants defined using preprocessor
directive. In the cases where these are an integer progression an
enumeration type can be used. Doing so adds documentation to the code
and makes the usage explicit. Maintain original constant value, this
value is returned by the device.
Replace (integer progression) preprocessor constants with enumeration
type.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SDIO header currently defines unused constants READ_STATUS_BUSY and
WRITE_STATUS_IDLE. There are reciprocal constants that are used
READ_STATUS_IDLE and WRITE_STATUS_BUSY. We can roll these into a
single enumeration type and remove the two that are unused.
Add enumeration type containing IDLE/BUSY pair that are currently used
within the SDIO source. Change source to use new enum types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver SDIO private data structure description includes a spin_lock
that is never used. This data structure only contains a pointer to the
sdio_func and a pointer to the main device private data. A spin_lock
is not required here.
Remove unused spin_lock.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver SDIO header describes a structure that is never used. It can be
safely removed.
Remove unused structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
