The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared. If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses. For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area. However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page. That
wastes CPU cycles as the unmapped/unshared range is scanned twice.
Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com
Fixes: 39dde65c99 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
paca.h uses ____cacheline_aligned without directly including cache.h,
where it's defined.
For Book3S builds that's OK because paca.h includes lppaca.h, and it
does include cache.h.
But Book3E builds have been getting cache.h indirectly via printk.h,
which is dicey, and in fact that include was recently removed, leading
to build errors such as:
ld: fs/isofs/dir.o:(.bss+0x0): multiple definition of `____cacheline_aligned'; fs/isofs/namei.o:(.bss+0x0): first defined here
So include cache.h directly to fix the build error.
Fixes: 534aa1dc97 ("printk: stop including cache.h from printk.h")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
set. This change improves DM's hipri bio polling (REQ_POLLED)
performance by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to
the Historical Service Time (HST) path selector.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmKOiAwACgkQxSPxCi2d
A1qCxgf/VLmiywUR7zCIDiPyJkc547z2MlPVaTCzpclklyLZ5wgfTtqsb8RnEqRs
KIXrvKbakbfZtrG0k9ZYdbIIVO4jHQavCXtVZH0Mj4XqQArDhHxZzlBx8i6BirO5
aya7HKWHcXj+s7GF146hRcPtD53LbSNDrB/bVaiZcHxOemthSgtht2xwmZfzoCcS
JtorpWkA97lgDbdSAcR0kn1zkHDWFkQMJgnUL9FotnlhOVXZVUvAbgb4OjfxB3fG
bCYlytDhs+6VwO+/CZXcOA7LNNtkLJPEkxUxjrChS5do64SgJUlDvY66iB6+7K0w
0Jri5D/NZvjwYVeLgXn5UwyQJ75cjQ==
=zlaE
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
This change improves DM's hipri bio polling (REQ_POLLED) performance
by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to the
Historical Service Time (HST) path selector.
* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm: pass NULL bdev to bio_alloc_clone
dm cache metadata: remove unnecessary variable in __dump_mapping
dm mpath: provide high-resolution timer to HST for bio-based
dm crypt: make printing of the key constant-time
dm integrity: fix error code in dm_integrity_ctr()
dm stats: add cond_resched when looping over entries
dm: improve abnormal bio processing
dm: simplify bio-based IO accounting further
dm: put all polled dm_io instances into a single list
dm: improve dm_io reference counting
dm: don't grab target io reference in dm_zone_map_bio
dm: improve bio splitting and associated IO accounting
dm: switch to bdev based IO accounting interfaces
dm: pass dm_io instance to dm_io_acct directly
dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
dm: use bio_sectors in dm_aceept_partial_bio
dm: simplify basic targets
dm: conditionally enable branching for less used features
dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
dm: move hot dm_io members to same cacheline as dm_target_io
...
Small collection of incremental improvement patches:
- Minor code cleanup patches, comment improvements, etc from static tools
- Clean the some of the kernel caps, reducing the historical stealth uAPI
leftovers
- Bug fixes and minor changes for rdmavt, hns, rxe, irdma
- Remove unimplemented cruft from rxe
- Reorganize UMR QP code in mlx5 to avoid going through the IB verbs layer
- flush_workqueue(system_unbound_wq) removal
- Ensure rxe waits for objects to be unused before allowing the core to
free them
- Several rc quality bug fixes for hfi1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYo+NxgAKCRCFwuHvBreF
YbqSAQDJ+QolaATUvOQUPLbuLopUCJLe95VS15Kl3SNXiVUUFAEA8DLL1s6+WShd
AgypUxGHipx5BAytrn45/WiwuDeEbQ8=
=jgTl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Small collection of incremental improvement patches:
- Minor code cleanup patches, comment improvements, etc from static
tools
- Clean the some of the kernel caps, reducing the historical stealth
uAPI leftovers
- Bug fixes and minor changes for rdmavt, hns, rxe, irdma
- Remove unimplemented cruft from rxe
- Reorganize UMR QP code in mlx5 to avoid going through the IB verbs
layer
- flush_workqueue(system_unbound_wq) removal
- Ensure rxe waits for objects to be unused before allowing the core
to free them
- Several rc quality bug fixes for hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (67 commits)
RDMA/rtrs-clt: Fix one kernel-doc comment
RDMA/hfi1: Remove all traces of diagpkt support
RDMA/hfi1: Consolidate software versions
RDMA/hfi1: Remove pointless driver version
RDMA/hfi1: Fix potential integer multiplication overflow errors
RDMA/hfi1: Prevent panic when SDMA is disabled
RDMA/hfi1: Prevent use of lock before it is initialized
RDMA/rxe: Fix an error handling path in rxe_get_mcg()
IB/core: Fix typo in comment
RDMA/core: Fix typo in comment
IB/hf1: Fix typo in comment
IB/qib: Fix typo in comment
IB/iser: Fix typo in comment
RDMA/mlx4: Avoid flush_scheduled_work() usage
IB/isert: Avoid flush_scheduled_work() usage
RDMA/mlx5: Remove duplicate pointer assignment in mlx5_ib_alloc_implicit_mr()
RDMA/qedr: Remove unnecessary synchronize_irq() before free_irq()
RDMA/hns: Use hr_reg_read() instead of remaining roce_get_xxx()
RDMA/hns: Use hr_reg_xxx() instead of remaining roce_set_xxx()
RDMA/irdma: Add SW mechanism to generate completions on error
...
We introduce "courteous server" in this release. Previously NFSD
would purge open and lock state for an unresponsive client after
one lease period (typically 90 seconds). Now, after one lease
period, another client can open and lock those files and the
unresponsive client's lease is purged; otherwise if the unrespon-
sive client's open and lock state is uncontended, the server retains
that open and lock state for up to 24 hours, allowing the client's
workload to resume after a lengthy network partition.
A longstanding issue with NFSv4 file creation is also addressed.
Previously a file creation can fail internally, returning an error
to the client, but leave the newly created file in place as an
artifact. The file creation code path has been reorganized so that
internal failures and race conditions are less likely to result in
an unwanted file creation.
A fault injector has been added to help exercise paths that are run
during kernel metadata cache invalidation. These caches contain
information maintained by user space about exported filesystems.
Many of our test workloads do not trigger cache invalidation.
There is one patch that is needed to support PREEMPT_RT and a fix
for an ancient "sleep while spin-locked" splat that seems to have
become easier to hit since v5.18-rc3.
-----BEGIN PGP SIGNATURE-----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=phE1
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"We introduce 'courteous server' in this release. Previously NFSD would
purge open and lock state for an unresponsive client after one lease
period (typically 90 seconds). Now, after one lease period, another
client can open and lock those files and the unresponsive client's
lease is purged; otherwise if the unresponsive client's open and lock
state is uncontended, the server retains that open and lock state for
up to 24 hours, allowing the client's workload to resume after a
lengthy network partition.
A longstanding issue with NFSv4 file creation is also addressed.
Previously a file creation can fail internally, returning an error to
the client, but leave the newly created file in place as an artifact.
The file creation code path has been reorganized so that internal
failures and race conditions are less likely to result in an unwanted
file creation.
A fault injector has been added to help exercise paths that are run
during kernel metadata cache invalidation. These caches contain
information maintained by user space about exported filesystems. Many
of our test workloads do not trigger cache invalidation.
There is one patch that is needed to support PREEMPT_RT and a fix for
an ancient 'sleep while spin-locked' splat that seems to have become
easier to hit since v5.18-rc3"
* tag 'nfsd-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (36 commits)
NFSD: nfsd_file_put() can sleep
NFSD: Add documenting comment for nfsd4_release_lockowner()
NFSD: Modernize nfsd4_release_lockowner()
NFSD: Fix possible sleep during nfsd4_release_lockowner()
nfsd: destroy percpu stats counters after reply cache shutdown
nfsd: Fix null-ptr-deref in nfsd_fill_super()
nfsd: Unregister the cld notifier when laundry_wq create failed
SUNRPC: Use RMW bitops in single-threaded hot paths
NFSD: Clean up the show_nf_flags() macro
NFSD: Trace filecache opens
NFSD: Move documenting comment for nfsd4_process_open2()
NFSD: Fix whitespace
NFSD: Remove dprintk call sites from tail of nfsd4_open()
NFSD: Instantiate a struct file when creating a regular NFSv4 file
NFSD: Clean up nfsd_open_verified()
NFSD: Remove do_nfsd_create()
NFSD: Refactor NFSv4 OPEN(CREATE)
NFSD: Refactor NFSv3 CREATE
NFSD: Refactor nfsd_create_setattr()
NFSD: Avoid calling fh_drop_write() twice in do_nfsd_create()
...
The parameter name in comments of event_trigger_separate_filter() is
inconsistent with actual parameter name, fix it.
Link: https://lkml.kernel.org/r/20220526072957.165655-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit:
4b9a8dca0e ("x86/idt: Remove the tracing IDT completely")
removed the 'tracing IDT' from arch/x86/kernel/tracepoint.c,
but left related comment. So that the comment become anachronistic.
Just remove the comment.
Link: https://lkml.kernel.org/r/20220526110831.175743-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 4b9a8dca0e ("x86/idt: Remove the tracing IDT completely")
removed the tracing IDT from the file arch/x86/kernel/tracepoint.c,
but left the related headers unused, remove it.
Link: https://lkml.kernel.org/r/20220525012827.93464-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The name in comments of parameter "filter_string" in function
create_filter is annotated as "filter_str", just fix it.
Link: https://lkml.kernel.org/r/20220524063937.52873-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Functions in trace_preemptirq.c could be invoked from early interrupt
code that bypasses kcov trace function's in_task() check. Disable kcov
on this file to reduce random code coverage.
Link: https://lkml.kernel.org/r/20220523063033.1778974-1-liu3101@purdue.edu
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Initialize the integer variable to 0 to fix the clang scan warning:
Undefined or garbage value returned to caller
[core.uninitialized.UndefReturn]
return ret;
Link: https://lkml.kernel.org/r/20220522061826.1751-1-gautammenghani201@gmail.com
Cc: stable@vger.kernel.org
Fixes: 8993665abc ("tracing/boot: Support multiple handlers for per-event histogram")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All instances of the function ftrace_arch_modify_prepare() and
ftrace_arch_modify_post_process() return zero. There's no point in
checking their return value. Just have them be void functions.
Link: https://lkml.kernel.org/r/20220518023639.4065-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The "char []" string form declares a single variable. It is better
than "char *" which creates two variables in the final assembly.
Link: https://lkml.kernel.org/r/20220512143230.28796-1-liqiong@nfschina.com
Signed-off-by: liqiong <liqiong@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is no need to wakeup the timerlat/ thread if stop tracing is hit
at the timerlat's IRQ handler.
Return before waking up timerlat's thread.
Link: https://lkml.kernel.org/r/b392356c91b56aedd2b289513cc56a84cf87e60d.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If print_stack and stop_tracing_us are set, and stop_tracing_us is hit
with latency higher than or equal to print_stack, print the
stack at the IRQ handler as it is useful to define the root cause for
the IRQ latency.
Link: https://lkml.kernel.org/r/fd04530ce98ae9270e41bb124ee5bf67b05ecfed.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, the notification of a new max latency is sent from
timerlat's IRQ handler anytime a new max latency is found.
While this behavior is not wrong, the send IPI overhead itself
will increase the thread latency and that is not the desired
effect (tracing overhead).
Moreover, the thread will notify a new max latency again because
the thread latency as it is always higher than the IRQ latency
that woke it up.
The only case in which it is helpful to notify a new max latency
from IRQ is when stop tracing (for the IRQ) is set, as in this
case, the thread will not be dispatched.
Notify a new max latency from the IRQ handler only if stop tracing is
set for the IRQ handler.
Link: https://lkml.kernel.org/r/2c2d9a56c0886c8402ba320de32856cbbb10c2bb.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Clark Williams <williams@redhat.com>
Fixes: a955d7eac1 ("trace: Add timerlat tracer")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Max Filippov reported:
When building kernel with CONFIG_KRETPROBES=n kernel/kprobes.c
compilation fails with the following messages:
kernel/kprobes.c: In function ‘recycle_rp_inst’:
kernel/kprobes.c:1273:32: error: implicit declaration of function
‘get_kretprobe’
kernel/kprobes.c: In function ‘kprobe_flush_task’:
kernel/kprobes.c:1299:35: error: ‘struct task_struct’ has no member
named ‘kretprobe_instances’
This came from the commit d741bf41d7 ("kprobes: Remove
kretprobe hash") which introduced get_kretprobe() and
kretprobe_instances member in task_struct when CONFIG_KRETPROBES=y,
but did not make recycle_rp_inst() and kprobe_flush_task()
depending on CONFIG_KRETPORBES.
Since those functions are only used for kretprobe, move those
functions into #ifdef CONFIG_KRETPROBE area.
Link: https://lkml.kernel.org/r/165163539094.74407.3838114721073251225.stgit@devnote2
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes: d741bf41d7 ("kprobes: Remove kretprobe hash")
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Setting set_event_pid with trailing whitespace lead to endless write
system calls like below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 4
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
....
This is because, the result of trace_get_user's are not returned when it
read at least one pid. To fix it, update read variable even if
parser->idx == 0.
The result of applied patch is below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 5
close(1) = 0
Link: https://lkml.kernel.org/r/20220503050546.288911-1-vvghjk1234@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Baik Song An <bsahn@etri.re.kr>
Cc: Hong Yeon Kim <kimhy@etri.re.kr>
Cc: Taeung Song <taeung@reallinux.co.kr>
Cc: linuxgeek@linuxgeek.io
Cc: stable@vger.kernel.org
Fixes: 4909010788 ("tracing: Add set_event_pid directory for future use")
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
CC: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_set_trace_write() function just removes the trailing whitespace
from the user supplied tracer name, but the leading whitespace should also
be removed.
In addition, if the user supplied tracer name contains only a few
whitespace characters, the first one will not be removed using the current
method, which results it a single whitespace character left in the buf.
To fix all of these issues, we use strim() to correctly remove both the
leading and trailing whitespace.
Link: https://lkml.kernel.org/r/20220121095623.1826679-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace_process_locs() function may return -ENOMEM error code, which
should be handled by the callers.
Link: https://lkml.kernel.org/r/20220120065949.1813231-1-ytcoode@gmail.com
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Creating tracefs entries with tracefs_create_file() followed by pr_warn()
is tedious and repetitive, we can use trace_create_file() to simplify
this process and make the code more readable.
Link: https://lkml.kernel.org/r/20220114131052.534382-1-ytcoode@gmail.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixups and enhancements for OpenRISC:
- A few sparse warning fixups and other cleanups I noticed when working
on a recent TLB bug found on a new OpenRISC core bring up.
- A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC
platforms when running CI tests
-----BEGIN PGP SIGNATURE-----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=JxMd
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
- A few sparse warning fixups and other cleanups I noticed when working
on a recent TLB bug found on a new OpenRISC core bring up.
- A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC
platforms when running CI tests
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Allow power off handler overriding
openrisc: Remove unused IMMU tlb workardound
openrisc/fault: Fix symbol scope warnings
openrisc/delay: Add include to fix symbol not declared warning
openrisc/time: Fix symbol scope warnings
openrisc/traps: Declare unhandled_exception for asmlinkage
openrisc/traps: Remove die_if_kernel function
openrisc/traps: Declare file scope symbols as static
openrisc: Update litex defconfig to support glibc userland
openrisc: Pretty print show_registers memory dumps
openrisc: Add syscall details to emergency syscall debugging
openrisc: Add support for liteuart emergency printing
openrisc: Cleanup emergency print handling
openrisc: Add gcc machine instruction flag configuration
openrisc: define nop command for simulator reboot
openrisc: remove bogus nops and shutdowns
openrisc: fix typos in comments
As promised, for v5.19 I queued up quite a bit of work for modules, but
still with a pretty conservative eye. These changes have been soaking on
modules-next (and so linux-next) for quite some time, the code shift was
merged onto modules-next on March 22, and the last patch was queued on May
5th.
The following are the highlights of what bells and whistles we will get for
v5.19:
1) It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any
functional at all during that endeavour. The penalty for the split
is +1322 bytes total, +112 bytes in data, +1210 bytes in text while
bss is unchanged. One of the benefits of this other than helping
make the code easier to read and review is summoning more help on review
for changes with livepatching so kernel/module/livepatch.c is now
pegged as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
2) Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
so to enable tracking unloaded modules which did taint the kernel.
3) Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to protect
against execution on a page basis. The exec stuff can be mapped by
different arch segment sizes (on book3s/32 that is 256M segments). By
default the module area is in an Exec segment while vmalloc area is in
a NoExec segment. Using vmalloc lets you muck with module data as
NoExec on those architectures whereas before you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some
security enhancements to set this as NoExec on free, and splitting
module data with text let's future generic special allocators
be added to the kernel without having developers try to grok
the tribal knowledge per arch. Work like Rick Edgecombe's
permission vmalloc interface [0] becomes easier to address over
time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
4) Masahiro Yamada's symbol search enhancements
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOnHkSHG1jZ3JvZkBr
ZXJuZWwub3JnAAoJEM4jHQowkoinFw4P/1ADdvfj+b6wbAxou6tPa2ZKnx/ImEnE
0T1P/n2guWg+2Q8oYjqifTpadGzr8td4c/PaGb5UpfdEOdBIyIGklrVZpQ+xkqfT
X4KIvqsf4ajL24OKxOSNtvL8RXEIDUhJ4Veq6BImBk8CPrPjsUBlNyAIlvV0aom2
BsFROQ2pMTSCiFY47gkMKLBlBny1l7zktoF0lhWTzHimw8VSDbTJFlu+fZvspd0o
lCqiHTkpiBSJDSEEjqk0lT6wIb27fvdzjmjy+Ur71bBKiPIEPiL5XNUufkGe6oB3
mnTOPow+wPTQc0dtkTpCHQYXE/a70Sbkwp1JfkbSYeHzJLlFru/tkmKiwN0RUo9l
0mY7VPEKuQWmxsOkLqvwcPBGx5JOSWOJKrbgpFmH+RLgeEgEa8t7uQDURK2KeIj8
P7ZzN5M2klKIHHA4vjfekYOJAb1Tii9Ibp7iGeiYxf93mPJBqwvRwbtBXBZpB4ce
FoDrxwEq812KPW7P2O1kgOvq7Fn1KWh0wVeKc8iBGxFxJhzOQY86H1ZRWDLAxRss
Rr1PMLt2TbTLUBt7MzR4vrg0NoQvpLYyf2jGFjWyZDRHU8nLeHkOlQot3xRDAtq9
Bpx5mSlM9BGfPibd1Kw4BaxBha5vVCQ+AcleT+NWnCjw4I0wLoFi9RLUSyItn9No
tlHLgdrM2a54
=cxtr
-----END PGP SIGNATURE-----
Merge tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
- It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any functional
at all during that endeavour. The penalty for the split is +1322
bytes total, +112 bytes in data, +1210 bytes in text while bss is
unchanged. One of the benefits of this other than helping make the
code easier to read and review is summoning more help on review for
changes with livepatching so kernel/module/livepatch.c is now pegged
as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
- Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
to enable tracking unloaded modules which did taint the kernel.
- Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to
protect against execution on a page basis. The exec stuff can be
mapped by different arch segment sizes (on book3s/32 that is 256M
segments). By default the module area is in an Exec segment while
vmalloc area is in a NoExec segment. Using vmalloc lets you muck
with module data as NoExec on those architectures whereas before
you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some security
enhancements to set this as NoExec on free, and splitting module
data with text let's future generic special allocators be added
to the kernel without having developers try to grok the tribal
knowledge per arch. Work like Rick Edgecombe's permission vmalloc
interface [0] becomes easier to address over time.
[0] https://lore.kernel.org/lkml/20201120202426.18009-1-rick.p.edgecombe@intel.com/#r
- Masahiro Yamada's symbol search enhancements
* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
module: merge check_exported_symbol() into find_exported_symbol_in_section()
module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
module: do not pass opaque pointer for symbol search
module: show disallowed symbol name for inherit_taint()
module: fix [e_shstrndx].sh_size=0 OOB access
module: Introduce module unload taint tracking
module: Move module_assert_mutex_or_preempt() to internal.h
module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
module.h: simplify MODULE_IMPORT_NS
powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
module: Remove module_addr_min and module_addr_max
module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: Introduce data_layout
module: Prepare for handling several RB trees
module: Always have struct mod_tree_root
module: Rename debug_align() as strict_align()
module: Rework layout alignment to avoid BUG_ON()s
module: Move module_enable_x() and frob_text() in strict_rwx.c
module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
module: Move version support into a separate file
...
For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
all this caused merge conflicts with one susbystem or another.
This tree was put together to help try to avoid conflicts with these cleanups
going on different trees at time. So nothing exciting on this pull request,
just cleanups.
I actually had this sysctl-next tree up since v5.18 but I missed sending a
pull request for it on time during the last merge window. And so these changes
have been being soaking up on sysctl-next and so linux-next for a while.
The last change was merged May 4th.
Most of the compile issues were reported by 0day and fixed.
To help avoid a conflict with bpf folks at Daniel Borkmann's request
I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
moves the BPF sysctls from kernel/sysctl.c to BPF core.
Possible merge conflicts and known resolutions as per linux-next:
bfp:
https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
rcu:
https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
powerpc:
https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=btwh
-----END PGP SIGNATURE-----
Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
- qcom: log pending irq during resume
minor cosmetic changes
- omap: use pm_runtime_resume_and_get
- imx: use pm_runtime_resume_and_get
remove redundant initializer
- mtk: added GCE header for MT8186
enable support for MT8186
- tegra: remove redundant NULL check
added hsp_sm_ops for send/recv api
support shared mailboxes
- stm: remove unsupported "wakeup" irq
- pcc: sanitize mbox allocated memory before use
- misc: documentation fixes for arm_mhu and qcom-ipcc
-
-----BEGIN PGP SIGNATURE-----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=f51u
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"api:
- hrtimer fix
qcom:
- log pending irq during resume
- minor cosmetic changes
omap:
- use pm_runtime_resume_and_get
imx:
- use pm_runtime_resume_and_get
- remove redundant initializer
mtk:
- added GCE header for MT8186
- enable support for MT8186
tegra:
- remove redundant NULL check
- added hsp_sm_ops for send/recv api
- support shared mailboxes
stm:
- remove unsupported "wakeup" irq
pcc:
- sanitize mbox allocated memory before use
misc:
- documentation fixes for arm_mhu and qcom-ipcc"
* tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom-ipcc: Fix -Wunused-function with CONFIG_PM_SLEEP=n
mailbox: forward the hrtimer if not queued and under a lock
mailbox: qcom-ipcc: Log the pending interrupt during resume
mailbox: pcc: Fix an invalid-load caught by the address sanitizer
dt-bindings: mailbox: remove the IPCC "wakeup" IRQ
mailbox: correct kerneldoc
mailbox: omap: using pm_runtime_resume_and_get to simplify the code
mailbox:imx: using pm_runtime_resume_and_get
mailbox: mediatek: support mt8186 adsp mailbox
dt-bindings: mailbox: mtk,adsp-mbox: add mt8186 compatible name
mailbox: tegra-hsp: Add 128-bit shared mailbox support
dt-bindings: tegra186-hsp: add type for shared mailboxes
mailbox: tegra-hsp: Add tegra_hsp_sm_ops
dt-bindings: gce: add the GCE header file for MT8186
mailbox: remove an unneeded NULL check on list iterator
mailbox: imx: remove redundant initializer
dt-bindings: mailbox: qcom-ipcc: simplify the example
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in drivers
- make irqchips immutable due to the new warning popping up when drivers try to
modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x & gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and descriptors to
gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core
-----BEGIN PGP SIGNATURE-----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=tj/B
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
This fixes a handful of issues with the XIP support, which has bit
rotted some lately.
* palmer/riscv-xip:
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
Commit e5499dd725 ("media: lirc: revert removal of unused feature
flags") reintroduced unused feature flags in the lirc uapi header, but
failed to reintroduce the necessary exceptions for the docs.
Fixes: e5499dd725 ("media: lirc: revert removal of unused feature flags")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
Daniel Wagner reported to me that readproc.h got deprecated. Also,
while the procps-ng library was available on Fedora, it was not available
on RHEL, which is a piece of evidence that it was not that used.
rtla uses procps-ng only to find the PID of the tracers' workload.
I used the procps-ng library to avoid reinventing the wheel. But in this
case, reinventing the wheel took me less time than the time we already
took trying to work around problems.
Implement a function that reads /proc/ entries, checking if:
- the entry is a directory
- the directory name is composed only of digits (PID)
- the directory contains the comm file
- the comm file contains a comm that matches the tracers'
workload prefix.
- then return true; otherwise, return false.
And use it instead of procps-ng.
Link: https://lkml.kernel.org/r/e8276e122ee9eb2c5a0ba8e673fb6488b924b825.1652423574.git.bristot@kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tao Zhou <tao.zhou@linux.dev>
Fixes: b1696371d8 ("rtla: Helper functions for rtla")
Reported-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Change to "The rtla meta-tool includes"
- Remove an unnecessary "But, "
- Adjust the formatting of the paragraph resulting from the changes.
- Simplify the wording for the libraries and tools.
Link: https://lkml.kernel.org/r/437f0accdde53713ab3cce46f3564be00487e031.1651247710.git.bristot@kernel.org
Link: https://lore.kernel.org/r/20220408161012.10544-1-jkacur@redhat.com/
Cc: Daniel Bristot de Oliveria <bristot@kernel.org>
Fixes: 79ce8f43ac ("rtla: Real-Time Linux Analysis tool")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix the following null/deref_null.cocci errors:
./tools/tracing/rtla/src/osnoise_hist.c:870:31-36: ERROR: record is NULL but dereferenced.
./tools/tracing/rtla/src/osnoise_top.c:650:31-36: ERROR: record is NULL but dereferenced.
./tools/tracing/rtla/src/timerlat_hist.c:905:31-36: ERROR: record is NULL but dereferenced.
./tools/tracing/rtla/src/timerlat_top.c:700:31-36: ERROR: record is NULL but dereferenced.
"record" is NULL before calling osnoise_init_trace_tool.
Add a tag "out_free" to avoid dereferring a NULL pointer.
Link: https://lkml.kernel.org/r/ae0e4500d383db0884eb2820286afe34ca303778.1651247710.git.bristot@kernel.org
Link: https://lore.kernel.org/r/20220408151406.34823-1-wanjiabing@vivo.com/
Cc: kael_w@yeah.net
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Fixes: 51d64c3a18 ("rtla: Add -e/--event support")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus had a problem compiling RTLA, saying:
"[...] I wish the tracing tools would do a bit more package
checking and helpful error messages too, rather than just
fail with:
fatal error: tracefs.h: No such file or directory"
Which is indeed not a helpful message. Update the Makefile, adding
proper checks for the dependencies, with useful information about
how to resolve possible problems.
For example, the previous error is now reported as:
$ make
********************************************
** NOTICE: libtracefs version 1.3 or higher not found
**
** Consider installing the latest libtracefs from your
** distribution, e.g., 'dnf install libtracefs' on Fedora,
** or from source:
**
** https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/
**
********************************************
These messages are inspired by the ones used on trace-cmd, as suggested
by Stevel Rostedt.
Link: https://lore.kernel.org/r/CAHk-=whxmA86E=csNv76DuxX_wYsg8mW15oUs3XTabu2Yc80yw@mail.gmail.com/
Changes from V1:
- Moved the rst2man check to the install phase (when it is used).
- Removed the procps-ng lib check [1] as it is being removed.
[1] a0f9f8c1030c66305c9b921057c3d483064d5529.1651220820.git.bristot@kernel.org
Link: https://lkml.kernel.org/r/3f1fac776c37e4b67c876a94e5a0e45ed022ff3d.1651238057.git.bristot@kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
-----BEGIN PGP SIGNATURE-----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=Y2TB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which
is the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of the
mach/*.h headers to allow the platform to be part of a generic ARMv4/v5
multiplatform kernel. The last bit that enables this support is still
missing here while we wait for some last dependencies to make it into
the mainline kernel through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets completed
here along with a few additional cleanup. At the same time, the s3c24xx
and s3c64xx are now deprecated and expected to get removed in the future.
The PXA and OMAP1 bits are in a separate branch because of dependencies.
Once both branches are merged, only the three Intel StrongARM platforms
(RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels,
and there are no plans to include these.
-----BEGIN PGP SIGNATURE-----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=CTtN
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
"This series has been 12 years in the making, it mostly finishes the
work that was started with the founding of Linaro to clean up platform
support in the kernel.
The largest change here is a cleanup of the omap1 platform, which is
the final ARM machine type to get converted to the common-clk
subsystem. All the omap1 specific drivers are now made independent of
the mach/*.h headers to allow the platform to be part of a generic
ARMv4/v5 multiplatform kernel.
The last bit that enables this support is still missing here while we
wait for some last dependencies to make it into the mainline kernel
through other subsystems.
The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
at the point of allowing multiplatform kernels, this work gets
completed here along with a few additional cleanup. At the same time,
the s3c24xx and s3c64xx are now deprecated and expected to get removed
in the future.
The PXA and OMAP1 bits are in a separate branch because of
dependencies. Once both branches are merged, only the three Intel
StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
need separate kernels, and there are no plans to include these"
* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: ixp4xx: Consolidate Kconfig fixing issue
ARM: versatile: Add missing of_node_put in dcscb_init
ARM: config: Refresh IXP4xx config after multiplatform
ARM: omap1: add back omap_set_dma_priority() stub
ARM: omap: fix missing declaration warnings
ARM: omap: fix address space warnings from sparse
ARM: spear: remove include/mach/ subdirectory
ARM: davinci: remove include/mach/ subdirectory
ARM: omap2: remove include/mach/ subdirectory
integrator: remove empty ap_init_early()
ARM: s3c: fix include path
MAINTAINERS: omap1: Add Janusz as an additional maintainer
ARM: omap1: htc_herald: fix typos in comments
ARM: OMAP1: fix typos in comments
ARM: OMAP1: clock: Remove noop code
ARM: OMAP1: clock: Remove unused code
ARM: OMAP1: clock: Fix UART rate reporting algorithm
ARM: OMAP1: clock: Fix early UART rate issues
ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
ARM: omap1: fix build with no SoC selected
...
Lots of smaller additions to the defconfig files for both 32-bit
and 64-bit arm platforms, enabling drivers that are now usable
on common hardware, and a few options to make it possible to boot
a file system image using systemd.
-----BEGIN PGP SIGNATURE-----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=+8LA
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"Lots of smaller additions to the defconfig files for both 32-bit and
64-bit arm platforms, enabling drivers that are now usable on common
hardware, and a few options to make it possible to boot a file system
image using systemd"
* tag 'arm-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
ARM: configs: Enable ASoC AC'97 glue
ARM: configs: Enable audio on BeagleBone Black in multi_v7_defconfig
ARM: configs: at91: Enable AUTOFS_FS required by systemd
ARM: configs: at91: Enable options required for systemd
ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER
ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers
ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK
ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP
ARM: configs: at91: sama7: add xisc and csi2dc
ARM: multi_v7_defconfig: add atmel video pipeline modules
ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS
arm64: defconfig: Enable the WM8524 codec driver
arm64: defconfig: Enable modules for arm displays
arm: nomadik: drop selecting obsolete CLKSRC_NOMADIK_MTU_SCHED_CLOCK
arm64: defconfig: Enable Renesas RZ/V2M SoC
arm64: defconfig: Enable ARCH_R9A07G043
arm64: defconfig: Enable configs for DisplayPort on J721e
arm64: defconfig: Build Tegra ASRC module
ARM: multi_v7_defconfig: enable CONFIG_ARCH_BCMBCA in armv7 defconfig
arm: mediatek: select arch timer for mt7629
...
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
There are 40 branches this time, adding a lot of new hardware
support, and cleanups. Krzysztof Kozlowski continues his treewide
cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L
general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for designing
custom SoCs, the support for now is for the Fixed Virtual Platform
emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used
in upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly
for 32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based
IOT board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch,
a Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568
-----BEGIN PGP SIGNATURE-----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=LsM7
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
These updates are for platform specific code in arch/arm/, mostly fixing
minor issues. The at91 platform gains support for better power
management on the lan966 platform and new firmware on the sama5
platform. The mediatek soc drivers in turn are enabled for the new
mt8195 SoC.
-----BEGIN PGP SIGNATURE-----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=Eoh1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
Mike Kravetz
Michael Ellerman
Linus Torvalds
sunliming
sunliming
Song Liu
Congyu Liu
Gautam Menghani
Julia Lawall
Li kunyu
liqiong
Daniel Bristot de Oliveira
Masami Hiramatsu
Wonhyuk Yang
Keita Suzuki
Yuntao Wang
Palmer Dabbelt
Sean Young
John Kacur
Wan Jiabing