Commit Graph

424 Commits

Author SHA1 Message Date
Bart Van Assche
92f4ae3559 nvme-rdma: Switch from dma_device to dev.parent
Prepare for removal of ib_device.dma_device.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:26:17 -05:00
Jens Axboe
d348499138 blk-mq-sched: allow setting of default IO scheduler
Add Kconfig entries to manage what devices get assigned an MQ
scheduler, and add a blk-mq flag for drivers to opt out of scheduling.
The latter is useful for admin type queues that still allocate a blk-mq
queue and tag set, but aren't use for normal IO.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:04:31 -07:00
Christoph Hellwig
b131c61d62 nvme: use blk_rq_payload_bytes
The new blk_rq_payload_bytes generalizes the payload length hacks
that nvme_map_len did before.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-13 15:17:04 -07:00
Guilherme G. Piccoli
b5a10c5f75 nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Commit 54adc01055 ("nvme/quirk: Add a delay before checking for adapter
readiness") introduced a quirk to adapters that cannot read the bit
NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters
need a delay or else the action of reading the bit NVME_CSTS_RDY could
somehow corrupt adapter's registers state and it never recovers.

When this quirk was added, we checked ctrl->tagset in order to avoid
quirking in probe time, supposing we would never require such delay
during probe. Well, it was too optimistic; we in fact need this quirk
at probe time in some cases, like after a kexec.

In some experiments, after abnormal shutdown of machine (aka power cord
unplug), we booted into our bootloader in Power, which is a Linux kernel,
and kexec'ed into another distro. If this kexec is too quick, we end up
reaching the probe of NVMe adapter in that distro when adapter is in
bad state (not fully initialized on our bootloader). What happens next
is that nvme_wait_ready() is unable to complete, except if the quirk is
enabled.

So, this patch removes the original ctrl->tagset verification in order
to enable the quirk even on probe time.

Fixes: 54adc01055 ("nvme/quirk: Add a delay before checking for adapter readiness")
Reported-by: Andrew Byrne <byrneadw@ie.ibm.com>
Reported-by: Jaime A. H. Gomez <jahgomez@mx1.ibm.com>
Reported-by: Zachary D. Myers <zdmyers@us.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Jeffrey Lien <Jeff.Lien@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-01-11 17:21:35 +01:00
Christoph Hellwig
1392370ee7 nvme-rdma: fix nvme_rdma_queue_is_ready
Now that we don't abuse the cmd field in struct request for nvme command
passthrough this function needs to be converted to the proper accessor
as well.

Fixes: d49187e97e ("nvme: introduce struct nvme_request")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2017-01-11 17:20:39 +01:00
Jens Axboe
8e5d31eb02 Merge branch 'nvme-4.10' of git://git.infradead.org/nvme into for-linus
Christoph writes:

The most significant one is that we've agreed on shared maintaince and
a common repository for the PCIe NVMe driver and NVMe over Fabrics.  The
target code still only has a subset of the maintainers but goes through
the same tree as well.  Keith, Sagi and me will take turns at collecting
patches and sending you pull requests.
2016-12-22 11:54:46 -07:00
Colin Ian King
7c3a23b85c nvmet/fcloop: remove some logically dead code performing redundant ret checks
The check to see if ret is non-zero and return this rather than count
is redundant in two occassions.  It is redundant because prior to this
check, the return code ret is already checked for a non-zero error
return value and we return from the function at that point.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:34:28 +01:00
Daniel Verkamp
6c73f94930 nvmet: fix KATO offset in Set Features
The Set Features implementation for Keep Alive Timer was using the wrong
structure when retrieving the KATO value; it was treating the Set
Features command as a Property Set command.

The NVMe spec defines the Keep Alive Timer feature as having one input
in CDW11 (4 bytes at offset 44 in the command) whereas the code was
reading 8 bytes at offset 48.

Since the Linux NVMe over Fabrics host never sets this feature, this
code has presumably never been tested.

Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:34:27 +01:00
Johannes Thumshirn
17a1ec08ce nvme/fc: simplify error handling of nvme_fc_create_hw_io_queues
Simplify the error handling of nvme_fc_create_hw_io_queues(), this saves us
one variable and one level of indentation.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviwed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:34:25 +01:00
James Smart
c703489885 nvme/fc: correct some printk information
Dan Carpenters's tool caught a pointer reference - should have been
just ptr, not &ptr.

Don't bother. Remove the pointer value in the printf. Its irrelevant.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:31 +01:00
Andy Lutomirski
2c473a9d02 nvme/scsi: Remove START STOP emulation
Now that the broken power state control is gone, it appears to serve
no purpose.  Just delete it.  NVME devices don't have a concept of
started vs stopped anyway.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:24 +01:00
Keith Busch
ff13b39ecf nvme/pci: Delete misleading queue-wrap comment
It is not theoretically possible for this driver to wrap twice while
processing completions. The driver allocates only 'queue_depth - 1'
tags, so there can never be more than that to reap when processing a
completion queue. Removing this misleading comment makes it a little
less likely people with broken controllers will blame the driver for
their spurious interrupts.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:23 +01:00
Max Gurtovoy
9fa196e7fc nvme/pci: Fix whitespace problem
Convert to tabs and remove unneeded whitespaces.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:18 +01:00
Keith Busch
e6282aef7b nvme: simplify stripe quirk
Some OEMs believe they own the Identify Controller vendor specific
region and will repurpose it with their own values. While not common,
we can't rely on the PCI VID:DID to tell use how to decode the field
we reserved for this as the stripe size so we need to do something else
for the list of devices using this quirk.

The field was supposed to allow flexibility on the device's back-end
striping, but it turned out that never materialized; the chunk is always
the same as MDTS in the products subscribing to this quirk, so this
patch removes the stripe_size field and sets the chunk to the max hw
transfer size for the devices using this quirk.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-21 11:33:06 +01:00
Stephen Bates
c965809c66 nvme : Use correct scnprintf in cmb show
Make sure we are using the correct scnprintf in the sysfs show
function for the CMB.

Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-19 08:35:24 -07:00
Linus Torvalds
4d5b57e05a Updates for 4.10 kernel merge window
- Shared mlx5 updates with net stack (will drop out on merge if Dave's
   tree has already been merged)
 - Driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
 - Debug cleanups
 - New connection rejection helpers
 - SRP updates
 - Various misc fixes
 - New paravirt driver from vmware
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYUbAPAAoJELgmozMOVy/dMXcP/iuG5MNzfN8Ny1JftyBQGWg3
 cqoQ2OLj9CsXjwVB+5EqbcZHRZY852lKONaLoDKkIOx4YAXO2YuIKOp944vN7EQx
 96wfqzT1F5jzAcy5mYZXgLaStGFDAwejKMqeHd0LfJj3OEtemGnVPWYzyqSQmSKo
 dzJraS1Z9GIRppzU5WaRpB9PtRBkqIqGJ5vZ0EKLGhed5hYY5r0iMJB0GfriMRDO
 lJ4UUVfpsAoLPnqDBFH6IMn2V2UeAw9IR5zNa1mrM1RBfvt/uYTxrw1w3p9WoaNs
 GRodhk4DCeAfeyqzVPNBLyXZ4Zq4FzGe3UWM4qysJ1RR4oFNw9Cuw0Fqk8mrfznr
 7hv5TpGIckRZiKf8l6e+qLirF0qGtXJg29j2vPVQI9i5nSj95g1agA81PnLQlLLb
 flWyxeMj81my7lfMHN1xcV6pqPEKMCOysZmfcvVfJd2XxpjuVD7ekl/YXWp8o8kU
 YPdQMqPD626XsD8VpPdMszb9FPmx0JD0HEv+Y1rIFX8JegEI+c3H2X0dqC27T/Ou
 FEPWOy025EgHm0Fh/7eIzkG6tjZ4JHoCugJAcxNZGj2XW4eB6r5vY8UwJ8iQRv+n
 PVYHiy0UoIRePh0mrdOSSphGZMi/GO/DsqKwCtAMEK43WqZQju6wR7QSIGkh66mp
 4uSHJqpf3YEYylxGMhk3
 =QeGy
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma updates from Doug Ledford:
 "This is the complete update for the rdma stack for this release cycle.

  Most of it is typical driver and core updates, but there is the
  entirely new VMWare pvrdma driver. You may have noticed that there
  were changes in DaveM's pull request to the bnxt Ethernet driver to
  support a RoCE RDMA driver. The bnxt_re driver was tentatively set to
  be pulled in this release cycle, but it simply wasn't ready in time
  and was dropped (a few review comments still to address, and some
  multi-arch build issues like prefetch() not working across all
  arches).

  Summary:

   - shared mlx5 updates with net stack (will drop out on merge if
     Dave's tree has already been merged)

   - driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe

   - debug cleanups

   - new connection rejection helpers

   - SRP updates

   - various misc fixes

   - new paravirt driver from vmware"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits)
  IB: Add vmw_pvrdma driver
  IB/mlx4: fix improper return value
  IB/ocrdma: fix bad initialization
  infiniband: nes: return value of skb_linearize should be handled
  MAINTAINERS: Update Intel RDMA RNIC driver maintainers
  MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers
  IB/core: fix unmap_sg argument
  qede: fix general protection fault may occur on probe
  IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc
  mlx5, calc_sq_size(): Make a debug message more informative
  mlx5: Remove a set-but-not-used variable
  mlx5: Use { } instead of { 0 } to init struct
  IB/srp: Make writing the add_target sysfs attr interruptible
  IB/srp: Make mapping failures easier to debug
  IB/srp: Make login failures easier to debug
  IB/srp: Introduce a local variable in srp_add_one()
  IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build
  IB/multicast: Check ib_find_pkey() return value
  IPoIB: Avoid reading an uninitialized member variable
  IB/mad: Fix an array index check
  ...
2016-12-15 12:03:32 -08:00
Linus Torvalds
cf1b3341af Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block IO fixes from Jens Axboe:
 "A few fixes that I collected as post-merge.

  I was going to wait a bit with sending this out, but the O_DIRECT fix
  should really go in sooner rather than later"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: Fix failed allocation path when mapping queues
  blk-mq: Avoid memory reclaim when remapping queues
  block_dev: don't update file access position for sync direct IO
  nvme/pci: Log PCI_STATUS when the controller dies
  block_dev: don't test bdev->bd_contains when it is not stable
2016-12-14 17:21:53 -08:00
Linus Torvalds
84b6079134 Just one simple change from Andrzej to drop the pointless return value
from the ->drop_link method.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYUUZ8AAoJEA+eU2VSBFGDjHIP/RKCBerQNkQ5hdUPnwJkXOh1
 b4SWiPNsNgkzpKJsE/vuL6R2qq9KX5sxWLi8a3Wx5jyMst1Xj2m4SvI4fUew/hBC
 QZM86aMJLcWZ8BfqLk2tLys759z/MSZSrXcUU8EM+JJqb6E0+i+5pgX8gOk7Pxwo
 FUagFzuGXTGORwkWRf47ludBuDEGMCrLQZ6WaXEKQULTUwfPrnP+n9EhZcWzzsyu
 0YxW9SFD73LgRSPLgxc+rw875D8rb3WSClWj/2LLQUy8z8QEJ83Mgt9hcbBV0Ppa
 efP0kPZbpDnVx6TjpldRKW9GivkbFXNnChMmgTkBGYTRjn8IHDsyAb6ZABw/O37N
 oyvd42xVDCE+GSImaMgCPL/5MEsQ+v9xCfgkBcyhWVQYFFj89Nmz/8VKp6AtTW3j
 X7MQuzdzKGoWTVpAOgw/SvjrRx+fcciTg31AhhGjE5cmARVoBJuCDa6NM3WXFQf4
 Pq74zetWDB38sBZwQV/6Y1m3OJGquD4MxX9b5SbNzwuROrKyJCAe3CCw7CKvuuWj
 RPkwZkHiCawRijxNDCWU8zpMcuUCdt9yjTWbUW/WrvKR6BGF4IwUHf9k8oorv1Qc
 Bo7enURnYBmcb7cijOLO+onzCf5iWAwMNk8KKJ1zthaZbloIGw8jdp5kOe5spEvF
 Uju3n/GNA/OWe2MAuutE
 =nOOH
 -----END PGP SIGNATURE-----

Merge tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs

Pull configfs update from Christoph Hellwig:
 "Just one simple change from Andrzej to drop the pointless return value
  from the ->drop_link method"

* tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs:
  fs: configfs: don't return anything from drop_link
2016-12-14 10:31:25 -08:00
Steve Wise
512fb1b32b nvmet_rdma: log the connection reject message
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14 11:38:28 -05:00
Steve Wise
7f03953c2f nvme-rdma: use rdma connection reject helper functions
Also add nvme cm status strings and use them.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14 11:38:28 -05:00
Andy Lutomirski
d2a6191840 nvme/pci: Log PCI_STATUS when the controller dies
When debugging nvme controller crashes, it's nice to know whether
the controller died cleanly so that the failure is just reflected in
CSTS, it died and put an error in PCI_STATUS, or whether it died so
badly that it stopped responding to PCI configuration space reads.

I've seen a failure that gives 0xffff in PCI_STATUS on a Samsung
"SM951 NVMe SAMSUNG 256GB" with firmware "BXW75D0Q".

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>

Fixed up white space and hunk reject.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-13 21:07:08 -07:00
Linus Torvalds
cdb98c2698 Revert "nvme: add support for the Write Zeroes command"
This reverts commit 6d31e3ba23.

This causes bootup problems for me both on my laptop and my desktop.
What they have in common is that they have NVMe disks with dm-crypt, but
it's not the same controller, so it's not controller-specific.

Jens does not see it on his machine (also NVMe), so it's presumably
something that triggers just on bootup.  Possibly related to dm-crypt
and the fact that I mark my luks volume with "allow-discards" in
/etc/crypttab.

It's 100% repeatable for me, which made it fairly straightforward to
bisect the problem to this commit. Small mercies.

So we don't know what the reason is yet, but the revert is needed to get
things going again.

Acked-by: Jens Axboe <axboe@fb.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-13 19:53:37 -08:00
Linus Torvalds
b92e09bb5b Merge branch 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Adam added opt-in ATA command priority support.

 - There are machines which hide multiple nvme devices behind an ahci
   BAR. Dan Williams proposed a solution to force-switch the mode but
   deemed too hackishd. People are gonna discuss the proper way to
   handle the situation in nvme standard meetings. For now, detect and
   warn about the situation.

 - Low level driver specific changes.

Christoph Hellwig pipes in about the hidden nvme warning:
 "I wish that was the case. We've pretty much agreed that we'll want to
  implement it as a virtual PCIe root bridge, similar to Intels other
  'innovation' VMD that we work around that way.

  But Intel management has apparently decided that they don't want to
  spend more cycles on this now that Lenovo has an optional BIOS that
  doesn't force this broken mode anymore, and no one outside of Intel
  has enough information to implement something like this.

  So for now I guess this warning is it, until Intel reconsideres and
  spends resources on fixing up the damage their Chipset people caused"

* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: warn about remapped NVMe devices
  ahci-remap.h: add ahci remapping definitions
  nvme: move NVMe class code to pci_ids.h
  pata: imx: support controller modes up to PIO4
  pata: imx: add support of setting timings for PIO modes
  pata: imx: set controller PIO mode with .set_piomode callback
  pata: imx: sort headers out
  ata: set ncq_prio_enabled iff device has support
  ata: ATA Command Priority Disabled By Default
  ata: Enabling ATA Command Priorities
  block: Add iocontext priority to request
  ahci: qoriq: added ls1046a platform support
2016-12-13 13:26:24 -08:00
Linus Torvalds
36869cb93d Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the main block pull request this series. Contrary to previous
  release, I've kept the core and driver changes in the same branch. We
  always ended up having dependencies between the two for obvious
  reasons, so makes more sense to keep them together. That said, I'll
  probably try and keep more topical branches going forward, especially
  for cycles that end up being as busy as this one.

  The major parts of this pull request is:

   - Improved support for O_DIRECT on block devices, with a small
     private implementation instead of using the pig that is
     fs/direct-io.c. From Christoph.

   - Request completion tracking in a scalable fashion. This is utilized
     by two components in this pull, the new hybrid polling and the
     writeback queue throttling code.

   - Improved support for polling with O_DIRECT, adding a hybrid mode
     that combines pure polling with an initial sleep. From me.

   - Support for automatic throttling of writeback queues on the block
     side. This uses feedback from the device completion latencies to
     scale the queue on the block side up or down. From me.

   - Support from SMR drives in the block layer and for SD. From Hannes
     and Shaun.

   - Multi-connection support for nbd. From Josef.

   - Cleanup of request and bio flags, so we have a clear split between
     which are bio (or rq) private, and which ones are shared. From
     Christoph.

   - A set of patches from Bart, that improve how we handle queue
     stopping and starting in blk-mq.

   - Support for WRITE_ZEROES from Chaitanya.

   - Lightnvm updates from Javier/Matias.

   - Supoort for FC for the nvme-over-fabrics code. From James Smart.

   - A bunch of fixes from a whole slew of people, too many to name
     here"

* 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits)
  blk-stat: fix a few cases of missing batch flushing
  blk-flush: run the queue when inserting blk-mq flush
  elevator: make the rqhash helpers exported
  blk-mq: abstract out blk_mq_dispatch_rq_list() helper
  blk-mq: add blk_mq_start_stopped_hw_queue()
  block: improve handling of the magic discard payload
  blk-wbt: don't throttle discard or write zeroes
  nbd: use dev_err_ratelimited in io path
  nbd: reset the setup task for NBD_CLEAR_SOCK
  nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
  nvme-fabrics: Add target support for FC transport
  nvme-fabrics: Add host support for FC transport
  nvme-fabrics: Add FC transport LLDD api definitions
  nvme-fabrics: Add FC transport FC-NVME definitions
  nvme-fabrics: Add FC transport error codes to nvme.h
  Add type 0x28 NVME type code to scsi fc headers
  nvme-fabrics: patch target code in prep for FC transport support
  nvme-fabrics: set sqe.command_id in core not transports
  parser: add u64 number parser
  nvme-rdma: align to generic ib_event logging helper
  ...
2016-12-13 10:19:16 -08:00
Christoph Hellwig
f9d03f96b9 block: improve handling of the magic discard payload
Instead of allocating a single unused biovec for discard requests, send
them down without any payload.  Instead we allow the driver to add a
"special" payload using a biovec embedded into struct request (unioned
over other fields never used while in the driver), and overloading
the number of segments for this case.

This has a couple of advantages:

 - we don't have to allocate the bio_vec
 - the amount of special casing for discard requests in the block
   layer is significantly reduced
 - using this same scheme for other request types is trivial,
   which will be important for implementing the new WRITE_ZEROES
   op on devices where it actually requires a payload (e.g. SCSI)
 - we can get rid of playing games with the request length, as
   we'll never touch it and completions will work just fine
 - it will allow us to support ranged discard operations in the
   future by merging non-contiguous discard bios into a single
   request
 - last but not least it removes a lot of code

This patch is the common base for my WIP series for ranges discards and to
remove discard_zeroes_data in favor of always using REQ_OP_WRITE_ZEROES,
so it would be good to get it in quickly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-09 08:30:51 -07:00
James Smart
475d0fe795 nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME
Add FC LLDD loopback driver to test FC host and target transport within
nvme-fabrics

To aid in the development and testing of the lower-level api of the FC
transport, this loopback driver has been created to act as if it were a
FC hba driver supporting both the host interfaces as well as the target
interfaces with the nvme FC transport.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 14:51:48 +01:00
James Smart
c53432030d nvme-fabrics: Add target support for FC transport
Implements the FC-NVME T11 definition of how nvme fabric capsules are
performed on an FC fabric. Utilizes a lower-layer API to FC host adapters
to send/receive FC-4 LS operations and perform the FCP transactions
necessary to perform and FCP IO request for NVME.

The T11 definitions for FC-4 Link Services are implemented which create
NVMeOF connections.  Implements the hooks with nvmet layer to pass NVME
commands to it for processing and posting of data/response base to the
host via the different connections.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:56 +02:00
James Smart
e399441de9 nvme-fabrics: Add host support for FC transport
Implements the FC-NVME T11 definition of how nvme fabric capsules are
performed on an FC fabric. Utilizes a lower-layer API to FC host adapters
to send/receive FC-4 LS operations and FCP operations that comprise NVME
over FC operation.

The T11 definitions for FC-4 Link Services are implemented which create
NVMeOF connections.  Implements the hooks with blk-mq to then submit admin
and io requests to the different connections.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:56 +02:00
James Smart
885aa4015f nvme-fabrics: patch target code in prep for FC transport support
- Add FC transport type decoding
- Add FC address family decoding

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:03 +02:00
James Smart
721b3917c4 nvme-fabrics: set sqe.command_id in core not transports
Currently, core.c sets command_id only on rd/wr commands, leaving it to
the transport to set it again to ensure the request had a command id.

Move location of set in core so applies to all commands.
Remove transport sets.

Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Max Gurtovoy
27a4beef0b nvme-rdma: align to generic ib_event logging helper
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:03 +02:00
Max Gurtovoy
675796be47 nvmet-rdma: align to generic ib_event logging helper
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06 10:17:03 +02:00
Sagi Grimberg
d4a5340edd nvme-rdma: remove redundant define
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
6eb7283054 nvme-fabrics: Adjust source code indentation
Adjust indentation such that arguments are aligned.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
6bcb5268d4 nvme/scsi: Remove set-but-not-used variables
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Solganik Alexander
e4fcf07cca nvmet: Fix possible infinite loop triggered on hot namespace removal
When removing a namespace we delete it from the subsystem namespaces
list with list_del_init which allows us to know if it is enabled or
not.

The problem is that list_del_init initialize the list next and does
not respect the RCU list-traversal we do on the IO path for locating
a namespace. Instead we need to use list_del_rcu which is allowed to
run concurrently with the _rcu list-traversal primitives (keeps list
next intact) and guarantees concurrent nvmet_find_naespace forward
progress.

By changing that, we cannot rely on ns->dev_link for knowing if the
namspace is enabled, so add enabled indicator entry to nvmet_ns for
that.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com>
Cc: <stable@vger.kernel.org> # v4.8+
2016-12-06 10:17:03 +02:00
Bart Van Assche
f3116d8f1e nvme-fabrics: Fix a memory leak in an nvmf_create_ctrl() error path
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
8eadfcb1b6 nvme-fabrics: Fix memory leaks in nvmf_parse_options()
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Samuel Jones
76c08bf46a nvme-rdma: force queue size to respect controller capability
Queue size needs to respect the Maximum Queue Entries Supported advertised by
the controller in its Capability register.

Signed-off-by: Samuel Jones <sjones@kalray.eu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[sagig: fixed queue_size adjustment according to
Daniel Verkamp <daniel.verkamp@intel.com> comment]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Bart Van Assche
70d4281c4b nvmet-rdma: Fix REJ status code
nvmet_sq_init() returns a value <= 0. nvmet_rdma_cm_reject() expects
a second argument that is a NVME_RDMA_CM_* constant. Hence this patch.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-12-06 10:17:03 +02:00
Christoph Hellwig
a2e7eefd56 nvme: move NVMe class code to pci_ids.h
We'll need to check for it in the AHCI drivers (yes, really) soon.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-12-05 14:31:23 -05:00
Chaitanya Kulkarni
d262920998 nvmet: add support for the Write Zeroes command
Add support for handling write zeroes command on target.
Call into __blkdev_issue_zeroout, which the block layer expands into the
best suitable variant of zeroing the LBAs. Allow write zeroes operation
to deallocate the LBAs when calling __blkdev_issue_zeroout.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01 07:58:40 -07:00
Chaitanya Kulkarni
6d31e3ba23 nvme: add support for the Write Zeroes command
Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block
device, if the device supports optional command bit set for write
zeroes. Add support to setup write zeroes command. Set maximum possible
write zeroes sectors in one write zeroes command according to
nvme write zeroes command definition.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01 07:58:40 -07:00
Andrzej Pietrasiewicz
e16769d4bc fs: configfs: don't return anything from drop_link
Documentation/filesystems/configfs/configfs.txt says:

"When unlink(2) is called on the symbolic link, the source item is
notified via the ->drop_link() method.  Like the ->drop_item() method,
this is a void function and cannot return failure."

The ->drop_item() is indeed a void function, the ->drop_link() is
actually not. This, together with the fact that the value of ->drop_link()
is silently ignored suggests, that it is the ->drop_link() return
type that should be corrected and changed to void.

This patch changes drop_link() signature and all its users.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
[hch: reverted reformatting of some code]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-01 10:50:49 +01:00
Javier González
8e53624d44 lightnvm: eliminate nvm_lun abstraction in mm
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.

Since targets own the LUNs the are instantiated on top of and manage the
free block list internally, there is no need for a LUN abstraction in
the media manager. LUNs are intrinsically managed as in the physical
layout (ch:0,lun:0, ..., ch:0,lun:n, ch:1,lun:0, ch:1,lun:n, ...,
ch:m,lun:0, ch:m,lun:n) and given to the targets based on the target
creation ioctl. This simplifies LUN management and clears the path for a
partition manager to sit directly underneath LightNVM targets.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Javier González
8e79b5cb1d lightnvm: move block provisioning to targets
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.

This patch moves the block provisioning inside of the target and removes
the get/put block interface from the media manager.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Javier González
bb3149792e lightnvm: enable to send hint to erase command
Erases might be subject to host hints. An example is multi-plane
programming to erase blocks in parallel. Enable targets to specify this
hint.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Matias Bjørling
3dc87dd048 nvme: lightnvm: attach lightnvm sysfs to nvme block device
Previously, LBA read and write were not supported in the lightnvm
specification. Now that it supports it, lets use the traditional
NVMe gendisk, and attach the lightnvm sysfs geometry export.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Matias Bjørling
7498e99fc5 nvme: lightnvm: frees wrong cmd structure
When struct nvme_request was introduced, the nvme_nvm_submit_io was
converted to the new interface. The interface moves nvme_nvm_command
data structure into the struct request pdu. On io completion, rq->cmd is
freed, which should have been the dereferenced pdu nvme_request->cmd.

Fixes: d49187e97e "nvme: introduce struct nvme_request"
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-29 12:12:51 -07:00
Ming Lei
3a83f46775 block: bio: pass bvec table to bio_init()
Some drivers often use external bvec table, so introduce
this helper for this case. It is always safe to access the
bio->bi_io_vec in this way for this case.

After converting to this usage, it will becomes a bit easier
to evaluate the remaining direct access to bio->bi_io_vec,
so it can help to prepare for the following multipage bvec
support.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Fixed up the new O_DIRECT cases.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-22 08:57:21 -07:00
Keith Busch
d48756228e nvme/pci: Don't free queues on error
The nvme_remove function tears down all allocated resources in the correct
order, so no need to free queues on error during initialization. This
fixes possible use-after-free errors when queues are still associated
with a blk-mq hctx.

Reported-by: Scott Bauer <scott.bauer@intel.com>
Tested-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-16 12:39:57 -07:00
Omar Sandoval
bac0000af5 nvme: untangle 0 and BLK_MQ_RQ_QUEUE_OK
Let's not depend on any of the BLK_MQ_RQ_QUEUE_* constants having
specific values. No functional change.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-15 12:50:11 -07:00
Sagi Grimberg
14c862dbb0 nvmet-rdma: drain the queue-pair just before freeing it
draining the qp right after disconnect might not suffice because
the nvmet sq is not fully drained (in nvmet_sq_destroy) and we might
see completions after the drain. Instead, drain right before the
qp destroy which comes after the sq destruction and we can be sure
that no posts come after the drain.

Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:53 +02:00
Steve Wise
c8dbc37cd8 nvme-rdma: stop and free io queues on connect failure
While testing nvme-rdma with the spdk nvmf target over iw_cxgb4, I
configured the target (mistakenly) to generate an error creating the
NVMF IO queues.  This resulted a "Invalid SQE Parameter" error sent back
to the host on the first IO queue connect:

[ 9610.928182] nvme nvme1: queue_size 128 > ctrl maxcmd 120, clamping down
[ 9610.938745] nvme nvme1: creating 32 I/O queues.

So nvmf_connect_io_queue() returns an error to
nvmf_connect_io_queue() / nvmf_connect_io_queues(), and that
is returned to nvme_rdma_create_io_queues().  In the error path,
nvmf_rdma_create_io_queues() frees the queue tagset memory _before_
stopping and freeing the IB queues, which causes yet another
touch-after-free crash due to SQ CQEs being flushed after the ib_cqe
structs pointed-to by the flushed WRs have been freed (since they are
part of the nvme_rdma_request struct).

The fix is to stop and free the queues in nvmf_connect_io_queues()
if there is an error connecting any of the queues.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:53 +02:00
Sagi Grimberg
766dbb179d nvmet-rdma: don't forget to delete a queue from the list of connection failed
In case we accepted a queue connection and it failed, we might not
remove the queue from the list until we unload and clean it up.
We should delete it from the queue list on the relevant handler.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:52 +02:00
Sagi Grimberg
8242ddac1b nvmet: Don't queue fatal error work if csts.cfs is set
In the transport, in case of an interal queue error like
error completion in rdma we trigger a fatal error. However,
multiple queues in the same controller can serr error completions
and we don't want to trigger fatal error work more than once.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:51 +02:00
Christoph Hellwig
553cd9ef82 nvme-rdma: reject non-connect commands before the queue is live
If we reconncect we might have command queue up that get resent as soon
as the queue is restarted.  But until the connect command succeeded we
can't send other command.  Add a new flag that marks a queue as live when
connect finishes, and delay any non-connect command until the queue is
live based on it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
[sagig: fixes admin queue LIVE setting]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:51 +02:00
Bart Van Assche
fa14a0acea nvmet-rdma: Fix possible NULL deref when handling rdma cm events
When we initiate queue teardown sequence we call rdma_destroy_qp
which clears cm_id->qp, afterwards we call rdma_destroy_id, but
we might see a rdma_cm event in between with a cleared cm_id->qp
so watch out for that and silently ignore the event because this
means that the queue teardown sequence is in progress.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-11-14 02:08:50 +02:00
Matias Bjørling
409ae5a76e lightnvm: invalid offset calculation for lba_shift
The ns->lba_shift assumes its value to be the logarithmic of the
LA size. A previous patch duplicated the lba_shift calculation into
lightnvm. It prematurely also subtracted a 512byte shift, which commonly
is applied per-command. The 512byte shift being subtracted twice led to
data loss when restoring the logical to physical mapping table from
device and when issuing I/O commands using rrpc.

Fix offset by removing the 512byte shift subtraction when calculating
lba_shift.

Fixes: b0b4e09c1a "lightnvm: control life of nvm_dev in driver"
Reported-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-11 18:27:32 -07:00
Jens Axboe
bbd7bb7017 block: move poll code to blk-mq
The poll code is blk-mq specific, let's move it to blk-mq.c. This
is a prep patch for improving the polling code.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-11-11 13:40:25 -07:00
Christoph Hellwig
7bf58533a0 nvme: don't pass the full CQE to nvme_complete_async_event
We only need the status and result fields, and passing them explicitly
makes life a lot easier for the Fibre Channel transport which doesn't
have a full CQE for the fast path case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 10:06:26 -07:00
Christoph Hellwig
d49187e97e nvme: introduce struct nvme_request
This adds a shared per-request structure for all NVMe I/O.  This structure
is embedded as the first member in all NVMe transport drivers request
private data and allows to implement common functionality between the
drivers.

The first use is to replace the current abuse of the SCSI command
passthrough fields in struct request for the NVMe command passthrough,
but it will grow a field more fields to allow implementing things
like common abort handlers in the future.

The passthrough commands are handled by having a pointer to the SQE
(struct nvme_command) in struct nvme_request, and the union of the
possible result fields, which had to be turned from an anonymous
into a named union for that purpose.  This avoids having to pass
a reference to a full CQE around and thus makes checking the result
a lot more lightweight.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-10 10:06:24 -07:00
Bart Van Assche
a6eaa8849f nvme: Use BLK_MQ_S_STOPPED instead of QUEUE_FLAG_STOPPED in blk-mq code
Make nvme_requeue_req() check BLK_MQ_S_STOPPED instead of
QUEUE_FLAG_STOPPED. Remove the QUEUE_FLAG_STOPPED manipulations
that became superfluous because of this change. Change
blk_queue_stopped() tests into blk_mq_queue_stopped().

This patch fixes a race condition: using queue_flag_clear_unlocked()
is not safe if any other function that manipulates the queue flags
can be called concurrently, e.g. blk_cleanup_queue().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Bart Van Assche
3174dd33fa nvme: Fix a race condition related to stopping queues
Avoid that nvme_queue_rq() is still running when nvme_stop_queues()
returns.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Bart Van Assche
2b053aca76 blk-mq: Add a kick_requeue_list argument to blk_mq_requeue_request()
Most blk_mq_requeue_request() and blk_mq_add_to_requeue_list() calls
are followed by kicking the requeue list. Hence add an argument to
these two functions that allows to kick the requeue list. This was
proposed by Christoph Hellwig.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Bart Van Assche
9b7dd572cc blk-mq: Remove blk_mq_cancel_requeue_work()
Since blk_mq_requeue_work() no longer restarts stopped queues
canceling requeue work is no longer needed to prevent that a
stopped queue would be restarted. Hence remove this function.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-02 12:50:19 -06:00
Christoph Hellwig
70fd76140a block,fs: use REQ_* flags directly
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly.  Where applicable this also drops usage of the
bio_set_op_attrs wrapper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-01 09:43:26 -06:00
Christoph Hellwig
e806402130 block: split out request-only flags into a new namespace
A lot of the REQ_* flags are only used on struct requests, and only of
use to the block layer and a few drivers that dig into struct request
internals.

This patch adds a new req_flags_t rq_flags field to struct request for
them, and thus dramatically shrinks the number of common requests.  It
also removes the unfortunate situation where we have to fit the fields
from the same enum into 32 bits for struct bio and 64 bits for
struct request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-28 08:45:17 -06:00
Linus Torvalds
ecd06f2883 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A set of fixes that missed the merge window, mostly due to me being
  away around that time.

  Nothing major here, a mix of nvme cleanups and fixes, and one fix for
  the badblocks handling"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvmet: use symbolic constants for CNS values
  nvme: use symbolic constants for CNS values
  nvme.h: add an enum for cns values
  nvme.h: don't use uuid_be
  nvme.h: resync with nvme-cli
  nvme: Add tertiary number to NVME_VS
  nvme : Add sysfs entry for NVMe CMBs when appropriate
  nvme: don't schedule multiple resets
  nvme: Delete created IO queues on reset
  nvme: Stop probing a removed device
  badblocks: fix overlapping check for clearing
2016-10-21 10:54:01 -07:00
Christoph Hellwig
e9c9346e20 nvmet: use symbolic constants for CNS values
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19 11:36:22 -06:00
Christoph Hellwig
fa60682677 nvme: use symbolic constants for CNS values
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19 11:36:22 -06:00
Christoph Hellwig
a446c0840e nvme.h: resync with nvme-cli
Import a few updates to nvme.h from nvme-cli.  This mostly includes a few
new fields and error codes, but also a few renames that so far are only
used in user space.  Also one field is moved from an array of two le64
values to one of 16 u8 values so that we can more easily access it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19 11:36:22 -06:00
Gabriel Krisman Bertazi
8ef2074d28 nvme: Add tertiary number to NVME_VS
NVMe 1.2.1 specification adds a tertiary element to the version number.
This updates the macro and its callers to include the final number and
fixup a single place in nvmet where the version was generated manually.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-19 11:36:22 -06:00
Stephen Bates
202021c1a6 nvme : Add sysfs entry for NVMe CMBs when appropriate
Add a sysfs attribute that contains salient information about the NVMe
Controller Memory Buffer when one is present. For now, just display the
information about the CMB available from the control registers. We attach
the CMB attribute file to the existing nvme_ctrl sysfs group so it can
handle the sysfs teardown.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 11:10:28 -06:00
Keith Busch
c5f6ce97c1 nvme: don't schedule multiple resets
The queue_work only fails if the work is pending, but not yet running. If
the work is running, the work item would get requeued, triggering a
double reset. If the first reset fails for any reason, the second
reset triggers:

	WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)

Hitting that schedules controller deletion for a second time, which
potentially takes a reference on the device that is being deleted.
If the reset occurs at the same time as a hot removal event, this causes
a double-free.

This patch has the reset helper function check if the work is busy
prior to queueing, and changes all places that schedule resets to use
this function. Since most users don't want to sync with that work, the
"flush_work" is moved to the only caller that wants to sync.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg<sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 09:24:39 -06:00
Keith Busch
7065906096 nvme: Delete created IO queues on reset
The driver was decrementing the online_queues prior to attempting to
delete those IO queues, so the driver ended up not requesting the
controller delete any. This patch saves the online_queues prior to
suspending them, and adds that parameter for deleting io queues.

Fixes: c21377f8 ("nvme: Suspend all queues before deletion")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 09:22:16 -06:00
Keith Busch
0df1e4f5e0 nvme: Stop probing a removed device
There is no reason the nvme controller can ever return all 1's from
reading the CSTS register. This patch returns an error if we observe
that status. Without this, we may incorrectly proceed with controller
initialization and unnecessarilly rely on error handling to clean this.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-12 08:40:13 -06:00
Mauricio Faria de Oliveira
2b6b535d91 nvme: use the DMA_ATTR_NO_WARN attribute
Use the DMA_ATTR_NO_WARN attribute for the dma_map_sg() call of the nvme
driver that returns BLK_MQ_RQ_QUEUE_BUSY (not for BLK_MQ_RQ_QUEUE_ERROR).

Link: http://lkml.kernel.org/r/1470092390-25451-4-git-send-email-mauricfo@linux.vnet.ibm.com
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:32 -07:00
Linus Torvalds
12e3d3cdd9 Merge branch 'for-4.9/block-irq' of git://git.kernel.dk/linux-block
Pull blk-mq irq/cpu mapping updates from Jens Axboe:
 "This is the block-irq topic branch for 4.9-rc. It's mostly from
  Christoph, and it allows drivers to specify their own mappings, and
  more importantly, to share the blk-mq mappings with the IRQ affinity
  mappings. It's a good step towards making this work better out of the
  box"

* 'for-4.9/block-irq' of git://git.kernel.dk/linux-block:
  blk_mq: linux/blk-mq.h does not include all the headers it depends on
  blk-mq: kill unused blk_mq_create_mq_map()
  blk-mq: get rid of the cpumask in struct blk_mq_tags
  nvme: remove the post_scan callout
  nvme: switch to use pci_alloc_irq_vectors
  blk-mq: provide a default queue mapping for PCI device
  blk-mq: allow the driver to pass in a queue mapping
  blk-mq: remove ->map_queue
  blk-mq: only allocate a single mq_map per tag_set
  blk-mq: don't redistribute hardware queues on a CPU hotplug event
2016-10-09 17:29:33 -07:00
Linus Torvalds
b9044ac829 Merge of primary rdma-core code for 4.9
- Updates to mlx5
 - Updates to mlx4 (two conflicts, both minor and easily resolved)
 - Updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper
   resolution is to keep the code in cxgb4_main.c as it is in Linus'
   tree as attach_uld was refactored and moved into cxgb4_uld.c)
 - Improvements to uAPI (moved vendor specific API elements to uAPI area)
 - Add hns-roce driver and hns and hns-roce ACPI reset support
 - Conversion of all rdma code away from deprecated
   create_singlethread_workqueue
 - Security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
   staging)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX+AwSAAoJELgmozMOVy/d0WkQAKxPzVccMWwHv28iZI4ey13u
 JwE+VoCNpCAZAVuEgzK5zzFdNHPvAk2jU93H4apA7dfXJBXPatVuj9Lnk+ieEEnW
 tbFwJjBpbQ3Zol3+SPfAHnsVMbtax+xmd6WDKExPXXEDl1L6rutwL3KKfmgWEitg
 ysX7XOJCiSdyM0hcg4T6UPB9a3jGPff9NLu0oGamV+yoUk5Y0WGoVFxHZ4MKcw8t
 OkFBYIxGz4SGwq2tulStuH03HteURX594KngtrA8dyq6l1R2GlGRv+bkJAUEIWUv
 aA0ow3VWusOM6fT+jLXPCv8iUwIXM8tR/U6F7X+cmORUUtWvCl+uCUVid113j/aN
 BK+Af2nJnfoJ5cDBPsD+bC76l5gQycNZO/Qh8op2kmgJtD+6OpGM3cBXsHx53+kk
 0wloJ2lKCGShWxNj+ig8n8rR/rhhs/x3vV3ouCVWNMbOUgOSN3eYHxmK3wGFW4nd
 Qx+WYCjj9Yi/J6nmUDcfEQ4NWPR22Q2+0ENAabfhLhV6mDloAO5ILHd4GDqC3IA9
 UtxlVjf4ZonaiLnTQQzCnDMGVVk6tT8FJ9D42s0ScwjbdYwjyCW9/rs/g2EhcprR
 Cc+AmjqLviCWGtzBSFO0SijqQon8lcQOwdLw61CdFFvPa/mlLdf1rbx9ArIyNVKn
 JSrbr3CGyoqyYj6qaEO5
 =LC+S
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull main rdma updates from Doug Ledford:
 "This is the main pull request for the rdma stack this release.  The
  code has been through 0day and I had it tagged for linux-next testing
  for a couple days.

  Summary:

   - updates to mlx5

   - updates to mlx4 (two conflicts, both minor and easily resolved)

   - updates to iw_cxgb4 (one conflict, not so obvious to resolve,
     proper resolution is to keep the code in cxgb4_main.c as it is in
     Linus' tree as attach_uld was refactored and moved into
     cxgb4_uld.c)

   - improvements to uAPI (moved vendor specific API elements to uAPI
     area)

   - add hns-roce driver and hns and hns-roce ACPI reset support

   - conversion of all rdma code away from deprecated
     create_singlethread_workqueue

   - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
     staging)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits)
  staging/lustre: Disable InfiniBand support
  iw_cxgb4: add fast-path for small REG_MR operations
  cxgb4: advertise support for FR_NSMR_TPTE_WR
  IB/core: correctly handle rdma_rw_init_mrs() failure
  IB/srp: Fix infinite loop when FMR sg[0].offset != 0
  IB/srp: Remove an unused argument
  IB/core: Improve ib_map_mr_sg() documentation
  IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets
  IB/mthca: Move user vendor structures
  IB/nes: Move user vendor structures
  IB/ocrdma: Move user vendor structures
  IB/mlx4: Move user vendor structures
  IB/cxgb4: Move user vendor structures
  IB/cxgb3: Move user vendor structures
  IB/mlx5: Move and decouple user vendor structures
  IB/{core,hw}: Add constant for node_desc
  ipoib: Make ipoib_warn ratelimited
  IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue
  IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue
  IB/ipoib: Remove deprecated create_singlethread_workqueue
  ...
2016-10-09 17:04:33 -07:00
Linus Torvalds
513a4befae Merge branch 'for-4.9/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
 "This is the main pull request for block layer changes in 4.9.

  As mentioned at the last merge window, I've changed things up and now
  do just one branch for core block layer changes, and driver changes.
  This avoids dependencies between the two branches. Outside of this
  main pull request, there are two topical branches coming as well.

  This pull request contains:

   - A set of fixes, and a conversion to blk-mq, of nbd. From Josef.

   - Set of fixes and updates for lightnvm from Matias, Simon, and Arnd.
     Followup dependency fix from Geert.

   - General fixes from Bart, Baoyou, Guoqing, and Linus W.

   - CFQ async write starvation fix from Glauber.

   - Add supprot for delayed kick of the requeue list, from Mike.

   - Pull out the scalable bitmap code from blk-mq-tag.c and make it
     generally available under the name of sbitmap. Only blk-mq-tag uses
     it for now, but the blk-mq scheduling bits will use it as well.
     From Omar.

   - bdev thaw error progagation from Pierre.

   - Improve the blk polling statistics, and allow the user to clear
     them. From Stephen.

   - Set of minor cleanups from Christoph in block/blk-mq.

   - Set of cleanups and optimizations from me for block/blk-mq.

   - Various nvme/nvmet/nvmeof fixes from the various folks"

* 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits)
  fs/block_dev.c: return the right error in thaw_bdev()
  nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
  nvme/scsi: Remove power management support
  nvmet: Make dsm number of ranges zero based
  nvmet: Use direct IO for writes
  admin-cmd: Added smart-log command support.
  nvme-fabrics: Add host_traddr options field to host infrastructure
  nvme-fabrics: revise host transport option descriptions
  nvme-fabrics: rework nvmf_get_address() for variable options
  nbd: use BLK_MQ_F_BLOCKING
  blkcg: Annotate blkg_hint correctly
  cfq: fix starvation of asynchronous writes
  blk-mq: add flag for drivers wanting blocking ->queue_rq()
  blk-mq: remove non-blocking pass in blk_mq_map_request
  blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
  block: export bio_free_pages to other modules
  lightnvm: propagate device_add() error code
  lightnvm: expose device geometry through sysfs
  lightnvm: control life of nvm_dev in driver
  blk-mq: register device instead of disk
  ...
2016-10-07 14:42:05 -07:00
Andy Lutomirski
1a6fe74dfd nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
Any user I can imagine that needs a buffer at all will want to pass
a pointer directly.  There are no currently callers that use
buffers, so this change is painless, and it will make it much easier
to start using features that use buffers (e.g. APST).

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Tested-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-24 10:56:26 -06:00
Andy Lutomirski
26501db8dc nvme/scsi: Remove power management support
As far as I can tell, there is basically nothing correct about this
code.  It misinterprets npss (off-by-one).  It hardcodes a bunch of
power states, which is nonsense, because they're all just indices
into a table that software needs to parse.  It completely ignores
the distinction between operational and non-operational states.
And, until 4.8, if all of the above magically succeeded, it would
dereference a NULL pointer and OOPS.

Since this code appears to be useless, just delete it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Tested-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-24 10:56:25 -06:00
Alexander Solganik
2e5d0baa04 nvmet: Make dsm number of ranges zero based
This caused the nvmet request data length to be
incorrect.

Signed-off-by: Alexander Solganik <sashas@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-09-23 15:37:38 -07:00
Sagi Grimberg
9b349b080c nvmet: Use direct IO for writes
We're designed to work with high-end devices where
direct IO makes perfect sense. We noticed that we
context switch by scheduling kblockd instead of going
directly to the device without REQ_SYNC for writes.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
2016-09-23 15:37:38 -07:00
Chaitanya Kulkarni
2d79c7dc8f admin-cmd: Added smart-log command support.
This patch implements the support for smart-log command
(NVM Express 1.2.1-section 5.10.1.2 SMART / Health Information
(Log Identifier 02h)) on the target for NVMe over Fabric.

In current implementation host can retrieve following statistics:-
1. Data Units Read.
2. Data Units Written.
3. Host Read Commands.
4. Host Write Commands.

Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
James Smart
478bcb9388 nvme-fabrics: Add host_traddr options field to host infrastructure
Add the host_traddr field to allow specification of the host-port
connection info for the transport. Will be used by FC transport.

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
James Smart
4a9f05c57f nvme-fabrics: revise host transport option descriptions
Revise some of the comments so not so ethernet-network centric

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
James Smart
0fe51ff269 nvme-fabrics: rework nvmf_get_address() for variable options
Revise nvmf_get_address() string to account for not all options being
present.

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2016-09-23 15:37:37 -07:00
Christoph Hellwig
11975e0149 nvme-rdma: use IB_PD_UNSAFE_GLOBAL_RKEY
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-23 13:47:44 -04:00
Christoph Hellwig
ed082d36a7 IB/core: add support to create a unsafe global rkey to ib_create_pd
Instead of exposing ib_get_dma_mr to ULPs and letting them use it more or
less unchecked, this moves the capability of creating a global rkey into
the RDMA core, where it can be easily audited.  It also prints a warning
everytime this feature is used as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-23 13:47:44 -04:00
Sagi Grimberg
3b4ac78610 nvme-rdma: only clear queue flags after successful connect
Otherwise, nvme_rdma_stop_and_clear_queue() will incorrectly
try to stop/free rdma qps/cm_ids that are already freed.

Fixes: e89ca58f9c ("nvme-rdma: add DELETING queue flag")
Reported-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-22 19:58:17 -06:00
Simon A. F. Lund
40267efddc lightnvm: expose device geometry through sysfs
For a host to access an Open-Channel SSD, it has to know its geometry,
so that it writes and reads at the appropriate device bounds.

Currently, the geometry information is kept within the kernel, and not
exported to user-space for consumption. This patch exposes the
configuration through sysfs and enables user-space libraries, such as
liblightnvm, to use the sysfs implementation to get the geometry of an
Open-Channel SSD.

The sysfs entries are stored within the device hierarchy, and can be
found using the "lightnvm" device type.

An example configuration looks like this:

/sys/class/nvme/
└── nvme0n1
   ├── capabilities: 3
   ├── device_mode: 1
   ├── erase_max: 1000000
   ├── erase_typ: 1000000
   ├── flash_media_type: 0
   ├── media_capabilities: 0x00000001
   ├── media_type: 0
   ├── multiplane: 0x00010101
   ├── num_blocks: 1022
   ├── num_channels: 1
   ├── num_luns: 4
   ├── num_pages: 64
   ├── num_planes: 1
   ├── page_size: 4096
   ├── prog_max: 100000
   ├── prog_typ: 100000
   ├── read_max: 10000
   ├── read_typ: 10000
   ├── sector_oob_size: 0
   ├── sector_size: 4096
   ├── media_manager: gennvm
   ├── ppa_format: 0x380830082808001010102008
   ├── vendor_opcode: 0
   ├── max_phys_secs: 64
   └── version: 1

Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:57:31 -06:00
Matias Bjørling
b0b4e09c1a lightnvm: control life of nvm_dev in driver
LightNVM compatible device drivers does not have a method to expose
LightNVM specific sysfs entries.

To enable LightNVM sysfs entries to be exposed, lightnvm device
drivers require a struct device to attach it to. To allow both the
actual device driver and lightnvm sysfs entries to coexist, the device
driver tracks the lifetime of the nvm_dev structure.

This patch refactors NVMe and null_blk to handle the lifetime of struct
nvm_dev, which eliminates the need for struct gendisk when a lightnvm
compatible device is provided.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:56:18 -06:00
Matias Bjørling
ac81bfa986 nvme: refactor namespaces to support non-gendisk devices
With LightNVM enabled namespaces, the gendisk structure is not exposed
to the user. This prevents LightNVM users from accessing the NVMe device
driver specific sysfs entries, and LightNVM namespace geometry.

Refactor the revalidation process, so that a namespace, instead of a
gendisk, is revalidated. This later allows patches to wire up the
sysfs entries up to a non-gendisk namespace.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:56:12 -06:00
Linus Torvalds
46626600d1 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A set of fixes for the current series in the realm of block.

  Like the previous pull request, the meat of it are fixes for the nvme
  fabrics/target code.  Outside of that, just one fix from Gabriel for
  not doing a queue suspend if we didn't get the admin queue setup in
  the first place"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-rdma: add back dependency on CONFIG_BLOCK
  nvme-rdma: fix null pointer dereference on req->mr
  nvme-rdma: use ib_client API to detect device removal
  nvme-rdma: add DELETING queue flag
  nvme/quirk: Add a delay before checking device ready for memblaze device
  nvme: Don't suspend admin queue that wasn't created
  nvme-rdma: destroy nvme queue rdma resources on connect failure
  nvme_rdma: keep a ref on the ctrl during delete/flush
  iw_cxgb4: block module unload until all ep resources are released
  iw_cxgb4: call dev_put() on l2t allocation failure
2016-09-15 13:22:59 -07:00
Christoph Hellwig
b5af7f2ff0 nvme: remove the post_scan callout
No need now that we don't have to reverse engineer the irq affinity.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig
dca51e7892 nvme: switch to use pci_alloc_irq_vectors
Use the new helper to automatically select the right interrupt type, as
well as to use the automatic interupt affinity assignment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Christoph Hellwig
7d7e0f90b7 blk-mq: remove ->map_queue
All drivers use the default, so provide an inline version of it.  If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.

This provides better code generation, and better debugability as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-15 08:42:03 -06:00
Jens Axboe
3bc42f3f0e Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into for-linus
Sagi writes:

Here we have:
- Kconfig dependencies fix from Arnd
- nvme-rdma device removal fixes from Steve
- possible bad deref fix from Colin
2016-09-13 07:58:34 -06:00