Commit Graph

1035 Commits

Author SHA1 Message Date
Rafał Miłecki
bff23714bc leds: leds-gpio: Set of_node for created LED devices
When working with Device Tree we iterate over children of "gpio-leds"
compatible node and create LED device for each of them. We take care of
all common DT properties (label, default trigger, state, etc.), however
some triggers may want to support more of them.

It could be useful for timer trigger to support setting delay on/off
values with Device Tree property. Or for transient trigger to support
e.g. duration property.

We obviously should handle such properties in triggers, not in generic
code. To let trigger drivers read properties from DT node we need to set
of_node to point the relevant node. This change allows using all kind of
of helpers in e.g. "activate" callbacks.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-07-11 10:15:03 +02:00
Heiner Kallweit
a3eac76cdf leds: triggers: return error if invalid trigger name is provided via sysfs
If an invalid trigger name is provided via sysfs currently no error
is returned. Therefore it's not possible to determine whether the
trigger was set successfully.
Fix this by returning -EINVAL if no trigger is matched.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-07-04 08:51:37 +02:00
Suraj Jitindar Singh
d0226d315d powerpc/opal: Add inline function to get rc from an ASYNC_COMP opal_msg
An opal_msg of type OPAL_MSG_ASYNC_COMP contains the return code in the
params[1] struct member. However this isn't intuitive or obvious when
reading the code and requires that a user look at the skiboot
documentation or opal-api.h to verify this.

Add an inline function to get the return code from an opal_msg and update
call sites accordingly.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-29 17:33:18 +10:00
Stephan Linz
eb25cb9956 leds: convert IDE trigger to common disk trigger
This patch converts the IDE specific LED trigger to a generic disk
activity LED trigger. The libata core is now a trigger source just
like before the IDE disk driver. It's merely a replacement of the
string ide by disk.

The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is
widely used by any ibook/powerbook owners with great satisfaction.
Likewise, it is very often used successfully on different ARM platforms.

Unlike the original patch, the existing 'ide-disk' trigger is still
available for backward compatibility. That reduce the amount of patches
in affected device trees out of the mainline kernel. For further
development, the new name 'disk-activity' should be used.

Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-20 09:57:56 +02:00
Phil Reid
fa4191a609 leds: pca9532: Add device tree support
This patch adds basic device tree support for the pca9532 LEDs.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-20 09:43:33 +02:00
Linus Walleij
5ab92a7cb8 leds: handle suspend/resume in heartbeat trigger
The following phenomena was observed: when suspending the
system, sometimes the heartbeat LED was left on, glowing and
wasting power while the rest of the system is asleep, also
disturbing power dissapation measures on the odd suspend
cycle when it's left on.

Clearly this is not how we want the heartbeat trigger to
work: it should turn off and leave the LED off during
system suspend.

This removes the heartbeat trigger when preparing suspend and
restores it during resume. The trigger code will make sure all
LEDs are left in OFF state after removing the trigger, and
will re-enable the trigger on all LEDs after resuming.

Cc: linux-pm@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-08 11:47:06 +02:00
Tony Makkiel
7cfe749fad leds: core: Fix brightness setting upon hardware blinking enabled
Commit 76931edd54 ("leds: fix brightness changing when software blinking
is active") changed the semantics of led_set_brightness() which according
to the documentation should disable blinking upon any brightness setting.
Moreover it made it different for soft blink case, where it was possible
to change blink brightness, and for hardware blink case, where setting
any brightness greater than 0 was ignored.

While the change itself is against the documentation claims, it was driven
also by the fact that timer trigger remained active after turning blinking
off. Fixing that would have required major refactoring in the led-core,
led-class, and led-triggers because of cyclic dependencies.

Finally, it has been decided that allowing for brightness change during
blinking is beneficial as it can be accomplished without disturbing
blink rhythm.

The change in brightness setting semantics will not affect existing
LED class drivers that implement blink_set op thanks to the LED_BLINK_SW
flag introduced by this patch. The flag state will be from now on checked
in led_set_brightness() which will allow to distinguish between software
and hardware blink mode. In the latter case the control will be passed
directly to the drivers which apply their semantics on brightness set,
which is disable the blinking in case of most such drivers. New drivers
will apply new semantics and just change the brightness while hardware
blinking is on, if possible.

The issue was smuggled by subsequent LED core improvements, which modified
the code that originally introduced the problem.

Fixes: f1e80c0741 ("leds: core: Add two new LED_BLINK_ flags")
Signed-off-by: Tony Makkiel <tony.makkiel@daqri.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-08 11:47:06 +02:00
Linus Torvalds
ecc5fbd5ef pwm: Changes for v4.7-rc1
This set of changes introduces an atomic API to the PWM subsystem. This
 is influenced by the DRM atomic API that was introduced a while back,
 though it is obviously a lot simpler. The fundamental idea remains the
 same, though: drivers provide a single callback to implement the atomic
 configuration of a PWM channel.
 
 As a side-effect the PWM subsystem gains the ability for initial state
 retrieval, so that the logical state mirrors that of the hardware. Many
 use-cases don't care about this, but for others it is essential.
 
 These new features require changes in all users, which these patches
 take care of. The core is transitioned to use the atomic callback if
 available and provides a fallback mechanism for other drivers.
 
 Changes to transition users and drivers to the atomic API are postponed
 to v4.8.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXRcVWAAoJEN0jrNd/PrOhO3EP/RDuuco1fROml1ElCjcnWWfv
 3dPyKEJhZktMmRNd/V0zMUJiOwr77wlbX4oQ5HajMHNYFQ65jfihbbylhSDepnxg
 mjKV/yo18rzYZt9fv8huwvlwMOlLrJ9wQn4Gkbr5tzke6nITp52DTNH5y/anPQIk
 B7neA1TerodAbE9FWjYuBZIltkmYZDqdm//RCHXVyYym8VuotE+jf+nrMXI78FoL
 lgG64z/2OaGI+NZJQcpWftuz9nnenpa3sSLrvpitWEb/dAsXroMW/f08uVuOW87v
 0xk7N7zmEkef7izVOWiPOK/MxIdc8hI4A5JftzMJ7nbgJvwG78dJiOxgFhrJYx0z
 7zrYfjvvzjW0dpjZUvO37T/V5Rfxrk9sM7qUHJmN0+1oEkkCo1/c75JWTU2AmT4l
 qkJdOGhgv7LumIiwbEyxc/5Jyh1akKOUX2svO0+0dptLRX2UpN3yeKIYinG1dAuT
 86+/uuM6CL5gc+jVZ3GLNWfzHUu2RFVX0r0pzywq53pK5gMEs5WyxoIb5mHb8liA
 sHsrZ3wbGGn95yZo8CwkzXIUsUH7qKYK+UVWA6OVBoTq4AOBZtII1AqvUttl25qL
 xuKpj70xaBhK7VGqzDYQ68lqBaRySh+yzL/QsmnPEyx59mW81ytMrsn1Kmnuae2l
 bzUsnWrpHc6530fRggTD
 =sxT9
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes introduces an atomic API to the PWM subsystem.
  This is influenced by the DRM atomic API that was introduced a while
  back, though it is obviously a lot simpler.  The fundamental idea
  remains the same, though: drivers provide a single callback to
  implement the atomic configuration of a PWM channel.

  As a side-effect the PWM subsystem gains the ability for initial state
  retrieval, so that the logical state mirrors that of the hardware.
  Many use-cases don't care about this, but for others it is essential.

  These new features require changes in all users, which these patches
  take care of.  The core is transitioned to use the atomic callback if
  available and provides a fallback mechanism for other drivers.

  Changes to transition users and drivers to the atomic API are
  postponed to v4.8"

* tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  pwm: Add information about polarity, duty cycle and period to debugfs
  pwm: Switch to the atomic API
  pwm: Update documentation
  pwm: Add core infrastructure to allow atomic updates
  pwm: Add hardware readout infrastructure
  pwm: Move the enabled/disabled info into pwm_state
  pwm: Introduce the pwm_state concept
  pwm: Keep PWM state in sync with hardware state
  ARM: Explicitly apply PWM config extracted from pwm_args
  drm: i915: Explicitly apply PWM config extracted from pwm_args
  input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args
  input: misc: max8997: Explicitly apply PWM config extracted from pwm_args
  backlight: lm3630a: explicitly apply PWM config extracted from pwm_args
  backlight: lp855x: Explicitly apply PWM config extracted from pwm_args
  backlight: lp8788: Explicitly apply PWM config extracted from pwm_args
  backlight: pwm_bl: Use pwm_get_args() where appropriate
  fbdev: ssd1307fb: Use pwm_get_args() where appropriate
  regulator: pwm: Use pwm_get_args() where appropriate
  leds: pwm: Use pwm_get_args() where appropriate
  input: misc: max77693: Use pwm_get_args() where appropriate
  ...
2016-05-25 10:40:15 -07:00
Boris Brezillon
1b50673dfa leds: pwm: Use pwm_get_args() where appropriate
The PWM framework has clarified the concept of reference PWM config (the
platform dependent config retrieved from the DT or the PWM lookup table)
and real PWM state.

Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.

This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has just
been requested (before the user calls pwm_config/enable/disable()).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:02 +02:00
Ezequiel Garcia
80d6737b27 leds: gpio: Support the "panic-indicator" firmware property
Calling a GPIO LEDs is quite likely to work even if the kernel
has paniced, so they are ideal to blink in this situation.
This commit adds support for the new "panic-indicator"
firmware property, allowing to mark a given LED to blink on
a kernel panic.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-05-06 10:26:07 +02:00
Ezequiel Garcia
ba93cdce5b leds: triggers: Allow to switch the trigger to "panic" on a kernel panic
This commit adds a new led_cdev flag LED_PANIC_INDICATOR, which
allows to mark a specific LED to be switched to the "panic"
trigger, on a kernel panic.

This is useful to allow the user to assign a regular trigger
to a given LED, and still blink that LED on a kernel panic.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-05-06 10:22:09 +02:00
Martin Dummer
f15c65afdd leds: ss4200: add DMI data for FSC SCALEO Home Server
The Intel NAS SS4200 was also sold by Fujitsu Siemens (FSC) under
the name "SCALEO Home Server". The hardware is equivalent.

This patch adds the DMI data of this rebranded device.

Signed-off-by: Martin Dummer <martin.dummer@gmx.net>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-19 09:03:20 +02:00
Martin Dummer
fe15ee47e4 leds: ss4200: Add depend on x86 arch
There is only one x86 hardware where the driver leds-ss4200 applies to.
Add kconfig dependency to x86 architecture, fix help text whitespace.

Signed-off-by: Martin Dummer <martin.dummer@gmx.net>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-19 09:01:19 +02:00
Jacek Anaszewski
cf6fea8cda leds: ledtrig-ide-disk: Move ide_blink_delay to ledtrig_ide_activity()
Parameters delay_on and delay_off of led_trigger_blink_oneshot()
are pointers, to enable blink interval adjustment by LED class drivers
of the controllers that implement hardware blinking.

Move ide_blink_delay variable to ledtrig_ide_activity() in order to
prevent the situation when adjustment committed by one LED class
driver influences blink interval of the software fallback blink feature,
that is applied to the drivers that don't implement blink_set op.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-19 08:57:16 +02:00
Dan Carpenter
4a91c45ea5 leds: tca6507: silence an uninitialized variable warning
If choose_times() returns -EINVAL that means "c1" and "c2" haven't been
initialized.  I've added a check for that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-14 13:08:58 +02:00
Ezequiel Garcia
4b721174c7 leds: trigger: Introduce a MTD (NAND/NOR) trigger
This commit introduces a MTD trigger for flash (NAND/NOR) device
activity. The implementation is copied from IDE disk.

This trigger deprecates the "nand-disk" LED trigger, but for backwards
compatibility, we still keep the "nand-disk" trigger around.

The motivation for deprecating the "nand-disk" LED trigger is that
it only works for NAND drivers, whereas the "mtd" LED trigger
is more generic (in fact, "nand-disk" currently only works for
certain NAND drivers).

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-13 10:23:14 +02:00
Ezequiel Garcia
916fe61995 leds: trigger: Introduce a kernel panic LED trigger
This commit introduces a new LED trigger which allows to configure
a LED to blink on a kernel panic (through panic_blink).

Notice that currently the Openmoko FreeRunner (GTA02) mach code
sets panic_blink to blink a hard-coded LED. The new trigger is
meant to introduce a generic mechanism to achieve this.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-30 11:16:39 +02:00
Linus Torvalds
5a010c73cd platform-drivers-x86 for 4.6-1
Significant refactoring of Dell laptop drivers, modularizing the smbios code.
 Multiple new platforms added for ideapad, asus, dell, and alienware using
 existing quirks. A few fixes and cleanups.
 
 hp-wmi:
  - Remove GPS rfkill support via pre-2009 interface
  - fix unregister order in hp_wmi_rfkill_setup() once again
 
 ideapad-laptop:
  - Add ideapad Y700 (15) to the no_hw_rfkill DMI list
 
 fujitsu-laptop:
  - Support radio toggle button
 
 intel-hid:
  - allocate correct amount of memory for private struct
 
 platform/x86:
  - Make intel_scu_ipc explicitly non-modular
 
 intel_pmc_ipc:
  - Avoid pending IPC1 command during legacy suspend
  - Fix GCR register base address and length
 
 asus-nb-wmi:
  - add wapf=4 quirk for ASUS X75VD
 
 intel_telemetry_pltdrv:
  - Change verbosity control bits
 
 dell-rbtn:
  - Add a comment about the XPS 13 9350
 
 dell-wmi, dell-laptop:
  - depends DMI
 
 dell-wmi:
  - support Dell Inspiron M5110
  - properly process Dell Instant Launch hotkey
  - enable receiving WMI events on Dell Vostro V131
  - Support new hotkeys on the XPS 13 9350 (Skylake)
  - Clean up hotkey table size check
  - Stop storing pointers to DMI tables
 
 dell-laptop:
  - move dell_smi_error() to dell-smbios
  - use dell_smbios_find_token() instead of find_token_location()
  - use dell_smbios_find_token() instead of find_token_id()
  - extract SMBIOS-related code to a separate module
 
 dell-smbios:
  - rename dell_smi_error() to dell_smbios_error()
  - make da_tokens static
  - remove find_token_{id,location}()
  - implement new function for finding DMI table 0xDA tokens
  - make the SMBIOS buffer static
  - return the SMBIOS buffer from dell_smbios_get_buffer()
  - don't return an SMBIOS buffer from dell_smbios_send_request()
  - don't pass an SMBIOS buffer to dell_smbios_send_request()
  - rename dell_send_request() to dell_smbios_send_request()
  - rename release_buffer() to dell_smbios_release_buffer()
  - rename clear_buffer() to dell_smbios_clear_buffer()
  - rename get_buffer() to dell_smbios_get_buffer()
 
 dell-led:
  - use dell_smbios_send_request() for performing SMBIOS calls
  - use dell_smbios_find_token() for finding mic DMI tokens
 
 toshiba_acpi:
  - Add a module parameter to disable hotkeys registration
  - Add sysfs entries for the Cooling Method feature
  - Add support for cooling method feature
 
 Documentation/ABI:
  - Update sysfs-driver-toshiba_acpi file
 
 thinkpad_acpi:
  - Remove ambiguous logging for "Unsupported brightness interface"
 
 alienware-wmi:
  - whitespace improvements
  - Add support for two new systems: ASM200 and ASM201.
  - Add support for deep sleep control.
  - Add initial support for alienware graphics amplifier.
  - Add support for new platform: X51-R3
  - Clean up whitespace for ASM100 platform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW8s77AAoJEKbMaAwKp364iVgH/18Tpefbc7uOrNak4zfTmvVO
 CQjLdbnbCYoeNjwgdYSZNlaR+E2TuMdqmBXXLEr3kqicpmX15l+V5y8xJkDmGpxw
 0RmwJnkdIpmkZcjb3/2abOtIuOj1Y/tXCp5mY1FoaDYBQVzO+ZsPEGNQcMu5uJpa
 qZTw9UwiSPUspTrHHbS7/Bzv7yFnxlWC1nmt6G5zL4OMEv2AGbuVSstXVGySIML5
 TfFdisUBIXQplzwpDytHGqtGUJMc0NnT1s66beuo1oBdEFTFtBNpFySW3goV2nrZ
 JPbvyaV3tD24NYNmU9WH653InX4KuaGiJRWVT31a/I5HVVlx7mZdUYRI+EYAnmE=
 =e0E4
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Significant refactoring of Dell laptop drivers, modularizing the
  smbios code.  Multiple new platforms added for ideapad, asus, dell,
  and alienware using existing quirks.  A few fixes and cleanups.

  hp-wmi:
   - Remove GPS rfkill support via pre-2009 interface
   - fix unregister order in hp_wmi_rfkill_setup() once again

  ideapad-laptop:
   - Add ideapad Y700 (15) to the no_hw_rfkill DMI list

  fujitsu-laptop:
   - Support radio toggle button

  intel-hid:
   - allocate correct amount of memory for private struct

  platform/x86:
   - Make intel_scu_ipc explicitly non-modular

  intel_pmc_ipc:
   - Avoid pending IPC1 command during legacy suspend
   - Fix GCR register base address and length

  asus-nb-wmi:
   - add wapf=4 quirk for ASUS X75VD

  intel_telemetry_pltdrv:
   - Change verbosity control bits

  dell-rbtn:
   - Add a comment about the XPS 13 9350

  dell-wmi, dell-laptop:
   - depends DMI

  dell-wmi:
   - support Dell Inspiron M5110
   - properly process Dell Instant Launch hotkey
   - enable receiving WMI events on Dell Vostro V131
   - Support new hotkeys on the XPS 13 9350 (Skylake)
   - Clean up hotkey table size check
   - Stop storing pointers to DMI tables

  dell-laptop:
   - move dell_smi_error() to dell-smbios
   - use dell_smbios_find_token() instead of find_token_location()
   - use dell_smbios_find_token() instead of find_token_id()
   - extract SMBIOS-related code to a separate module

  dell-smbios:
   - rename dell_smi_error() to dell_smbios_error()
   - make da_tokens static
   - remove find_token_{id,location}()
   - implement new function for finding DMI table 0xDA tokens
   - make the SMBIOS buffer static
   - return the SMBIOS buffer from dell_smbios_get_buffer()
   - don't return an SMBIOS buffer from dell_smbios_send_request()
   - don't pass an SMBIOS buffer to dell_smbios_send_request()
   - rename dell_send_request() to dell_smbios_send_request()
   - rename release_buffer() to dell_smbios_release_buffer()
   - rename clear_buffer() to dell_smbios_clear_buffer()
   - rename get_buffer() to dell_smbios_get_buffer()

  dell-led:
   - use dell_smbios_send_request() for performing SMBIOS calls
   - use dell_smbios_find_token() for finding mic DMI tokens

  toshiba_acpi:
   - Add a module parameter to disable hotkeys registration
   - Add sysfs entries for the Cooling Method feature
   - Add support for cooling method feature

  Documentation/ABI:
   - Update sysfs-driver-toshiba_acpi file

  thinkpad_acpi:
   - Remove ambiguous logging for "Unsupported brightness interface"

  alienware-wmi:
   - whitespace improvements
   - Add support for two new systems: ASM200 and ASM201.
   - Add support for deep sleep control.
   - Add initial support for alienware graphics amplifier.
   - Add support for new platform: X51-R3
   - Clean up whitespace for ASM100 platform"

* tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits)
  hp-wmi: Remove GPS rfkill support via pre-2009 interface
  hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
  dell-wmi: support Dell Inspiron M5110
  dell-wmi: properly process Dell Instant Launch hotkey
  dell-wmi: enable receiving WMI events on Dell Vostro V131
  dell-smbios: rename dell_smi_error() to dell_smbios_error()
  dell-laptop: move dell_smi_error() to dell-smbios
  ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
  fujitsu-laptop: Support radio toggle button
  intel-hid: allocate correct amount of memory for private struct
  platform/x86: Make intel_scu_ipc explicitly non-modular
  intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
  intel_pmc_ipc: Fix GCR register base address and length
  asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
  intel_telemetry_pltdrv: Change verbosity control bits
  dell-rbtn: Add a comment about the XPS 13 9350
  dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
  dell-wmi: Clean up hotkey table size check
  dell-wmi, dell-laptop: depends DMI
  dell-wmi: Stop storing pointers to DMI tables
  ...
2016-03-23 17:20:59 -07:00
Michał Kępień
0c41a08e13 dell-led: use dell_smbios_send_request() for performing SMBIOS calls
Instead of using the WMI wrapper, dell-led can take advantage of
dell_smbios_send_request() for performing the SMBIOS calls required to
change the state of the microphone LED.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:44 -07:00
Michał Kępień
cf0d7ea335 dell-led: use dell_smbios_find_token() for finding mic DMI tokens
With the advent of dell_smbios_find_token(), dell-led does not need to
perform any DMI walking on its own, but it can rather ask dell-smbios to
look up the DMI tokens it needs for changing the state of the microphone
LED.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:43 -07:00
Heiner Kallweit
7296c33ed1 leds: triggers: simplify led_trigger_store
led_trigger_store can be significantly simplified by using sysfs_streq().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:23 +01:00
Amitoj Kaur Chawla
1c430f9021 leds: max8997: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

Also, remove platform_set_drvdata in probe function and the remove
function, max8997_led_remove as it is now has nothing to do.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:23 +01:00
Amitoj Kaur Chawla
eed16255d6 leds: da903x: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

Also, remove platform_set_drvdata in probe function and the remove
function, da903x_led_remove as it is now has nothing to do.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
Amitoj Kaur Chawla
48a7032ba0 leds: s3c24xx: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

Also, remove unnecessary function pdev_to_gpio, platform_set_drvdata
in the probe function and the remove function, s3c24xx_led_remove as
it is now has nothing to do.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
Amitoj Kaur Chawla
8d3b6a4001 leds: wm831x-status: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

Also, remove platform_set_drvdata from probe function and the remove
function, wm831x_status_remove as it is now has nothing to do.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
Amitoj Kaur Chawla
f165a66e16 leds: lp8788: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

Also, remove platform_set_drvdata in probe function and the remove
function, lp8788_led_remove as it is now has nothing to do.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
Amitoj Kaur Chawla
375446df95 leds: 88pm860x: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

Also, remove platform_set_drvdata in probe function and the remove
function, pm860x_led_remove as it is now has nothing to do.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
David Rivshin
e0442d7def leds: Add SN3218 and SN3216 support to the IS31FL32XX driver
Si-En Technology was acquired by ISSI in 2011, and it appears that
the IS31FL3218/IS31FL3216 are just rebranded SN3218/SN3216 devices.

Add the "si-en,sn3218" and "si-en,sn3216" compatible strings into the
IS31FL32XX driver as aliases for the issi equivalents, and update
binding documentation.

Datasheets:
    IS31FL3218: http://www.issi.com/WW/pdf/31FL3218.pdf
    SN3218:     http://www.si-en.com/uploadpdf/s2011517171720.pdf

    IS31FL3216: http://www.issi.com/WW/pdf/31FL3216.pdf
    SN3216:     http://www.si-en.com/uploadpdf/SN3216201152410148.pdf

Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:22 +01:00
David Rivshin
9d7cffaf99 leds: Add driver for the ISSI IS31FL32xx family of LED controllers
The IS31FL32xx family of LED controllers are I2C devices with multiple
constant-current channels, each with independent 256-level PWM control.

Datasheets: http://www.issi.com/US/product-analog-fxled-driver.shtml

This has been tested on the IS31FL3236 and IS31FL3216, on an ARM
(TI am335x) platform.

The programming paradigm of these devices is similar in the following
ways:
 - All registers are 8 bit
 - All LED control registers are write-only
 - Each LED channel has a PWM register (0-255)
 - PWM register writes are shadowed until an Update register is poked
 - All have a concept of Software Shutdown, which disables output

However, there are some differences in devices:
 - 3236/3235 have a separate Control register for each LED,
   (3218/3216 pack the enable bits into fewer registers)
 - 3236/3235 have a per-channel current divisor setting
 - 3236/3235 have a Global Control register that can turn off all LEDs
 - 3216 is unique in a number of ways
    - OUT9-OUT16 can be configured as GPIOs instead of LED controls
    - LEDs can be programmed with an 8-frame animation, with
      programmable delay between frames
    - LEDs can be modulated by an input audio signal
    - Max output current can be adjusted from 1/4 to 2x globally
    - Has a Configuration register instead of a Shutdown register

This driver currently only supports the base PWM control function
of these devices. The following features of these devices are not
implemented, although it should be possible to add them in the future:
 - All devices are capable of going into a lower-power "software
   shutdown" mode.
 - The is31fl3236 and is31fl3235 can reduce the max output current
   per-channel with a divisor of 1, 2, 3, or 4.
 - The is31fl3216 can use some LED channels as GPIOs instead.
 - The is31fl3216 can animate LEDs in hardware.
 - The is31fl3216 can modulate LEDs according to an audio input.
 - The is31fl3216 can reduce/increase max output current globally.

Signed-off-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:21 +01:00
Amitoj Kaur Chawla
50154e29e5 leds: lm3533: Use devm_led_classdev_register
Switch to resource-managed function devm_led_classdev_register instead
of led_classdev_register and remove unneeded led_classdev_unregister.

To be compatible with this change, remove an unnecessary label by
replacing it with direct return statement.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e;
@@
probefn(struct platform_device *pdev, ...) {
  ...
  e =
- led_classdev_register
+ devm_led_classdev_register
  (...);
   ...
?- led_classdev_unregister(...);
  ...
}
@remove depends on prb@
identifier platform.removefn;
@@
removefn(...) {
...
?- led_classdev_unregister(...);
...
}
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:21 +01:00
Geert Uytterhoeven
eae7c98acd leds: gpio: Use GPIOF_OUT_INIT_LOW instead of hardcoded zero
Use the GPIO flag definition instead of a numeric literal, so the casual
reader grepping for GPIOF_ will find the GPIO flags used.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:21 +01:00
Heiner Kallweit
d4887af9c2 leds: core: add helpers for calling brightness_set(_blocking)
Add helpers for calling brightness_set(_blocking) allowing to
simplify the code and make it better readable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:21 +01:00
Wei Yongjun
2d88a331e4 leds: leds-gpio: Fix return value check in create_gpio_led()
In case of error, the function gpio_to_desc() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:20 +01:00
Antonio Ospite
c9eec908a1 leds: lp3944: improve wording and formatting in a comment
Improve the wording for the comment about the led status, and while at
it also use the standard formatting for multi-line comments.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:20 +01:00
Heiner Kallweit
d84d80f38f leds: core: avoid error message when a USB LED device is unplugged
When a USB LED device is unplugged the remove call chain calls
led_classdev_unregister which tries to switch the LED off.
As the device has been removed already this results in a ENODEV
error message in dmesg.
Avoid this error message by ignoring ENODEV in calls from
led_classdev_unregister if the LED device is flagged as pluggable.

Therefore a new flag LED_HW_PLUGGABLE was introduced which should be set by
all LED drivers handling pluggable LED devices (mainly USB LED devices).

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-14 09:22:20 +01:00
Linus Torvalds
58cf279aca GPIO bulk updates for the v4.5 kernel cycle:
Infrastructural changes:
 
 - In struct gpio_chip, rename the .dev node to .parent to better reflect
   the fact that this is not the GPIO struct device abstraction. We will
   add that soon so this would be totallt confusing.
 
 - It was noted that the driver .get_value() callbacks was
   sometimes reporting negative -ERR values to the gpiolib core, expecting
   them to be propagated to consumer gpiod_get_value() and gpio_get_value()
   calls. This was not happening, so as there was a mess of drivers
   returning negative errors and some returning "anything else than zero"
   to indicate that a line was active. As some would have bit 31 set to
   indicate "line active" it clashed with negative error codes. This is
   fixed by the largeish series clamping values in all drivers with
   !!value to [0,1] and then augmenting the code to propagate error codes
   to consumers. (Includes some ACKed patches in other subsystems.)
 
 - Add a void *data pointer to struct gpio_chip. The container_of() design
   pattern is indeed very nice, but we want to reform the struct gpio_chip
   to be a non-volative, stateless business, and keep states internal to
   the gpiolib to be able to hold on to the state when adding a proper
   userspace ABI (character device) further down the road. To achieve this,
   drivers need a handle at the internal state that is not dependent on
   their struct gpio_chip() so we add gpiochip_add_data() and
   gpiochip_get_data() following the pattern of many other subsystems.
   All the "use gpiochip data pointer" patches transforms drivers to this
   scheme.
 
 - The Generic GPIO chip header has been merged into the general
   <linux/gpio/driver.h> header, and the custom header for that removed.
   Instead of having a separate mm_gpio_chip struct for these generic
   drivers, merge that into struct gpio_chip, simplifying the code and
   removing the need for separate and confusing includes.
 
 Misc improvements:
 
 - Stabilize the way GPIOs are looked up from the ACPI legacy
   specification.
 
 - Incremental driver features for PXA, PCA953X, Lantiq (patches from the
   OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
 
 New drivers:
 
 - Add a GPIO chip to the ALSA SoC AC97 driver.
 
 - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but
   the branch is merged here too to account for infrastructural changes).
 
 - The sx150x driver now supports the sx1502.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWmsZhAAoJEEEQszewGV1ztq0QAJ1KbNOpmf/s3INkOH4r771Z
 WIrNEsmwwLIAryo8gKNOM0H1zCwhRUV7hIE5jYWgD6JvjuAN6vobMlZAq21j6YpB
 pKgqnI5DuoND450xjb8wSwGQ5NTYp1rFXNmwCrtyTjOle6AAW+Kp2cvVWxVr77Av
 uJinRuuBr9GOKW/yYM1Fw/6EPjkvvhVOb+LBguRyVvq0s5Peyw7ZVeY1tjgPHJLn
 oSZ9dmPUjHEn91oZQbtfro3plOObcxdgJ8vo//pgEmyhMeR8XjXES+aUfErxqWOU
 PimrZuMMy4cxnsqWwh3Dyxo7KSWfJKfSPRwnGwc/HgbHZEoWxOZI1ezRtGKrRQtj
 vubxp5dUBA5z66TMsOCeJtzKVSofkvgX2Wr/Y9jKp5oy9cHdAZv9+jEHV1pr6asz
 Tas97MmmO77XuRI/GPDqVHx8dfa15OIz9s92+Gu64KxNzVxTo4+NdoPSNxkbCILO
 FKn7EmU3D0OjmN2NJ9GAURoFaj3BBUgNhaxacG9j2bieyh+euuUHRtyh2k8zXR9y
 8OnY1UOrTUYF8YIq9pXZxMQRD/lqwCNHvEjtI6BqMcNx4MptfTL+FKYUkn/SgCYk
 QTNV6Ui+ety5D5aEpp5q0ItGsrDJ2LYSItsS+cOtMy2ieOxbQav9NWwu7eI3l5ly
 gwYTZjG9p9joPXLW0E3g
 =63rR
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for v4.5.

  Notably there are big refactorings mostly by myself, aimed at getting
  the gpio_chip into a shape that makes me believe I can proceed to
  preserve state for a proper userspace ABI (character device) that has
  already been proposed once, but resulted in the feedback that I need
  to go back and restructure stuff.  So I've been restructuring stuff.
  On the way I ran into brokenness (return code from the get_value()
  callback) and had to fix it.  Also, refactored generic GPIO to be
  simpler.

  Some of that is still waiting to trickle down from the subsystems all
  over the kernel that provide random gpio_chips, I've touched every
  single GPIO driver in the kernel now, oh man I didn't know I was
  responsible for so much...

  Apart from that we're churning along as usual.

  I took some effort to test and retest so it should merge nicely and we
  shook out a couple of bugs in -next.

  Infrastructural changes:

   - In struct gpio_chip, rename the .dev node to .parent to better
     reflect the fact that this is not the GPIO struct device
     abstraction.  We will add that soon so this would be totallt
     confusing.

   - It was noted that the driver .get_value() callbacks was sometimes
     reporting negative -ERR values to the gpiolib core, expecting them
     to be propagated to consumer gpiod_get_value() and gpio_get_value()
     calls.  This was not happening, so as there was a mess of drivers
     returning negative errors and some returning "anything else than
     zero" to indicate that a line was active.  As some would have bit
     31 set to indicate "line active" it clashed with negative error
     codes.  This is fixed by the largeish series clamping values in all
     drivers with !!value to [0,1] and then augmenting the code to
     propagate error codes to consumers.  (Includes some ACKed patches
     in other subsystems.)

   - Add a void *data pointer to struct gpio_chip.  The container_of()
     design pattern is indeed very nice, but we want to reform the
     struct gpio_chip to be a non-volative, stateless business, and keep
     states internal to the gpiolib to be able to hold on to the state
     when adding a proper userspace ABI (character device) further down
     the road.  To achieve this, drivers need a handle at the internal
     state that is not dependent on their struct gpio_chip() so we add
     gpiochip_add_data() and gpiochip_get_data() following the pattern
     of many other subsystems.  All the "use gpiochip data pointer"
     patches transforms drivers to this scheme.

   - The Generic GPIO chip header has been merged into the general
     <linux/gpio/driver.h> header, and the custom header for that
     removed.  Instead of having a separate mm_gpio_chip struct for
     these generic drivers, merge that into struct gpio_chip,
     simplifying the code and removing the need for separate and
     confusing includes.

  Misc improvements:

   - Stabilize the way GPIOs are looked up from the ACPI legacy
     specification.

   - Incremental driver features for PXA, PCA953X, Lantiq (patches from
     the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48

  New drivers:

   - Add a GPIO chip to the ALSA SoC AC97 driver.

   - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
     but the branch is merged here too to account for infrastructural
     changes).

   - The sx150x driver now supports the sx1502"

* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
  gpio: generic: make bgpio_pdata always visible
  gpiolib: fix chip order in gpio list
  gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
  gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
  gpio: brcmstb: Allow building driver for BMIPS_GENERIC
  gpio: brcmstb: Set endian flags for big-endian MIPS
  gpio: moxart: fix build regression
  gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
  leds: pca9532: use gpiochip data pointer
  leds: tca6507: use gpiochip data pointer
  hid: cp2112: use gpiochip data pointer
  bcma: gpio: use gpiochip data pointer
  avr32: gpio: use gpiochip data pointer
  video: fbdev: via: use gpiochip data pointer
  gpio: pch: Optimize pch_gpio_get()
  Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
  pinctrl: nsp-gpio: use gpiochip data pointer
  pinctrl: vt8500-wmt: use gpiochip data pointer
  pinctrl: exynos5440: use gpiochip data pointer
  pinctrl: at91-pio4: use gpiochip data pointer
  ...
2016-01-17 12:32:01 -08:00
Linus Walleij
dced146758 leds: pca9532: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07 00:11:30 +01:00
Linus Walleij
2a66434370 leds: tca6507: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-07 00:11:20 +01:00
Vegard Nossum
522f17e121 leds: add HAS_IOMEM dependency to LEDS_BCM6328/LEDS_BCM6358
Ran into this on UML:

drivers/built-in.o: In function `bcm6328_leds_probe':
drivers/leds/leds-bcm6328.c:340: undefined reference to `devm_ioremap_resource'
drivers/built-in.o: In function `bcm6358_leds_probe':
drivers/leds/leds-bcm6358.c:173: undefined reference to `devm_ioremap_resource'
collect2: error: ld returned 1 exit status

devm_ioremap_resource() is defined only when HAS_IOMEM is selected.

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:41 +01:00
Heiner Kallweit
9534cc31dd leds: core: add managed version of led_trigger_register
Complementing devm_led_classdev_register add a managed version of
led_trigger_register.

I omit a managed version of led_classdev_unregister as the equivalent
devm_led_classdev_unregister isn't used in the kernel as of today.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
1259efaab8 leds: bcm6358: remove unneeded busy status check
The busy status checking isn't needed while reading initial LED status.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
1b85a5a5ef leds: bcm6328: improve blink support
BCM6328 controller has a margin of 20ms per blink step, which means that
we can only set it to 20, 40, 60 ... 1260 ms (0x3f * 20ms).
However, when checking if delay_on == delay_off, we were not considering
the case when the user had set delay_on=20 and delay_off=21, since this
will cause the driver to fallback to software blinking.
This update fixes this issue and improves blink steps by rounding them
in a more sensible way. Now 30-49ms is rounded to 40 ms, and previous
behaviour implied 40-59ms being rounded to 40 ms.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
6e636a0a28 leds: bcm6358: merge bcm6358_led_mode and bcm6358_led_set
bcm6358_led_mode is now only called by bcm6358_led_set, so merge both
in one single function.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
143b77ce03 leds: bcm6328: simplify duplicated unlock in bcm6328_blink_set
Instead of duplicating the unlock we can store the return value and use a
single unlock before returning that value, which simplifies the code.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
4ba113b6d4 leds: bcm6358: add little endian support
This adds little endian support while keeping big endian support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
a06cd4b762 leds: bcm6328: add little endian support
This adds little endian support while keeping big endian support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:40 +01:00
Álvaro Fernández Rojas
93a708dab8 leds: bcm6358: remove unneded lock when checking initial LED status
This lock isn't really needed, since we're only reading the register and
changes made to other LEDs aren't relevant.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Álvaro Fernández Rojas
42273caa18 leds: bcm6358: Use bcm6358_led_set() in order to get rid of the lock
Replaces bcm6358_led_mode with bcm6358_led_set so we don't need to handle
the lock.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Álvaro Fernández Rojas
0171dc6abb leds: bcm6328: remove unneded lock when checking initial LED
This lock isn't really needed, since we're only reading the register and
changes made to other LEDs aren't relevant.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Álvaro Fernández Rojas
41251e2469 leds: bcm6328: code cleaning
- Remove double whitespace
- Add missing brackets
- Add spinlock info

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Paul Gortmaker
f7d98a65d0 leds: syscon: Make the driver explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/leds/Kconfig:config LEDS_SYSCON
drivers/leds/Kconfig:   bool "LED support for LEDs on system controllers"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Paul Gortmaker
067a8f3cad leds: ledtrig-ide-disk: Make the driver explicitly non-modular
The Kconfig for this driver is currently:

config LEDS_TRIGGER_IDE_DISK
        bool "LED IDE Disk Trigger"

...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Paul Gortmaker
227a0ca17e leds: ledtrig-cpu: Make the driver explicitly non-modular
The Kconfig for this driver is currently:

config LEDS_TRIGGER_CPU
        bool "LED CPU Trigger"

...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:39 +01:00
Thierry Reding
6e25e641e9 leds: sunfire: Use platform_register/unregister_drivers()
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:38 +01:00
Jacek Anaszewski
8891161567 leds: max77693: Add missing of_node_put
Each break out of the for_each_available_child_of_node loop requires
of_node_put().

This patch adds missing of_node_put() when loop breaks on conflicting
values of led-sources DT property.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-01-04 09:57:38 +01:00
Jacek Anaszewski
0c24199ca9 leds: aat1290: Add missing of_node_put
The refcount of device_node increases after of_get_next_available_child()
is called. Make sure it is decremented also in case of DT parsing error.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-01-04 09:57:38 +01:00
Jacek Anaszewski
f5db6b8301 leds: powernv: Implement brightness_set_blocking op
Since brightness setting can sleep for this driver, implement
brightness_set_blocking op, instead of brightness_set.
It makes this driver compatible with LED triggers.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
2016-01-04 09:57:38 +01:00
Jacek Anaszewski
ba1c8179c3 leds: ipaq-micro: Implement brightness_set_blocking op
Since brightness setting can sleep for this driver, implement
brightness_set_blocking op, instead of brightness_set.
It makes this driver compatible with LED triggers.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-04 09:57:38 +01:00
Saurabh Sengar
5a7c536f26 leds: powernv: removing NULL check
No need to explicitly check for pointer to be null,
of_prop_next_string anyways returns NULL, if passed pointer is NULL
and hence loop will continue.

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:38 +01:00
Simon Arlott
b964c5ba6d leds: bcm6328: Swap LED ON and OFF definitions
The values of BCM6328_LED_MODE_ON and BCM6328_LED_MODE_OFF were named
for active low LEDs. These should be swapped so that they are named for
the default case of active high LEDs.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Simon Arlott
9d3c0663df leds: bcm6328: Reuse bcm6328_led_set() instead of copying its functionality
When ensuring a consistent initial LED state in bcm6328_led (as they may
be blinking instead of on/off), the LED register is set using an inverted
copy of bcm6328_led_set(). To avoid further errors relating to active low
handling, call this function directly instead.

As bcm6328_led_set() acquires the same spinlock again when updating the
register, it is called after unlocking.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Jacek Anaszewski
c29e650b3a leds: ns2: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
2016-01-04 09:57:37 +01:00
Uwe Kleine-König
49651c6c66 leds: pwm: fix driver description and make license match the header
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Milo Kim
d1aa577f5e leds: turn off the LED and wait for completion on unregistering LED class device
Workqueue, 'set_brightness_work' is used for scheduling brightness control.
This workqueue is canceled when the LED class device is unregistered.
Currently, LED subsystem handles like below.

  cancel_work_sync(&led_cdev->set_brightness_work)
  led_set_brightness(led_cdev, LED_OFF)

However, this could be a problem.
Workqueue is going to be canceled but LED device needs to be off.
The worst case is null pointer access due to scheduling a workqueue.

LED module is loaded.
  LED driver private data is allocated by using devm_zalloc().

LED module is unloaded.
  led_classdev_unregister() is called.
    cancel_work_sync()
      led_set_brightness(led_cdev, LED_OFF)
        schedule_work() if LED driver uses brightness_set_blocking()
        In the meantime, driver private data will be freed.

        ..scheduling..

        brightness_set_blocking() callback is invoked.
          For the brightness control, LED driver tries to access private
          data but resource is removed!

To avoid this problem, LED subsystem should turn off the brightness first
and wait for completion.

  led_set_brightness(led_cdev, LED_OFF)
  flush_work(&led_cdev->set_brightness_work)

It guarantees that LED driver turns off the brightness prior to
resource management.

Cc: linux-leds@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Jacek Anaszewski
abc196359b leds: flash: Remove checking for state < 1 in flash_strobe_store()
Strobe state variable is declared as unsigned long, remove
the check for values less than zero then.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reported-by: David Binderman <dcb314@hotmail.com>
2016-01-04 09:57:37 +01:00
Ingi Kim
77e7915b15 leds: ktd2692: Add missing of_node_put
The refcount of device_node increases after of_node_get() is called.
So, a break out of the loop requires of_node_put().

This patch adds missing of_node_put() when loop breaks.

Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:37 +01:00
Markus Hofstaetter
f16703360d leds: call led_pwm_set() in leds-pwm to enforce default LED_OFF
Some PWMs are disabled by default or the default pin setting
does not match the LED_OFF state (e.g., active-low leds).
Hence, the driver may end up reporting 0 brightness, but
the leds are actually on using full brightness, because
it never enforces its default configuration.
So enforce it by calling led_pwm_set() after successfully
registering the device.

Tested on a Phytec phyFLEX i.MX6Q board based on kernel
v3.19.5.

Signed-off-by: Markus Hofstaetter <markus.hofstaetter@ait.ac.at>
Tested-by: Markus Hofstaetter <markus.hofstaetter@ait.ac.at>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:36 +01:00
Uwe Kleine-König
fb65ee94ee leds: triggers: oneshot: fix module license specification
The header of this file fixes the license to GPL 2 only without the
option to use later version. So use the string "GPL v2" that is to be
used in this case.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:36 +01:00
Rob Herring
22f933add4 leds: ledtrig-transient: fix duration to be msec instead of jiffies
The transient trigger duration is documented to be in msec units, but is
actually in jiffies units. Other time based triggers are in msec units
as well. Fix the timer setup to convert from msec.

This could break an existing userspace that worked around this problem,
but exposing jiffies to userspace is just wrong and would break anyway
if HZ is changed.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:36 +01:00
Jacek Anaszewski
df8ff5d2e0 leds: lm355x: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Daniel Jeong <daniel.jeong@ti.com>
Cc: G.Shark Jeong <gshark.jeong@gmail.com>
2016-01-04 09:57:36 +01:00
Jacek Anaszewski
9aa0762579 leds: pwm: remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Raphael Assenat <raph@8d.com>
2016-01-04 09:57:35 +01:00
Jacek Anaszewski
d5b8a09000 leds: gpio: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Raphael Assenat <raph@8d.com>
2016-01-04 09:57:35 +01:00
Andrew Lunn
0dd756f767 leds: wm8350: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Antonio Ospite <ao2@ao2.it>
Reviewed-by: Mark Brown <broonie@kernel.org>
2016-01-04 09:57:35 +01:00
Andrew Lunn
77e8503638 leds: regulator: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:35 +01:00
Andrew Lunn
4330f2f26e leds: mc13783: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:35 +01:00
Andrew Lunn
d1c5c5c2e3 leds: max8997: Remove unneeded workqueue include
Work queues are not used in this driver, so remove the include.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2016-01-04 09:57:35 +01:00
Andrew Lunn
a0011f1be7 leds: lt3593: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:34 +01:00
Andrew Lunn
8ec108c03e leds: dac124d085: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:34 +01:00
Andrew Lunn
0a1f01d385 leds: da9052: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:34 +01:00
Andrew Lunn
803bb384ba leds: da903x: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:34 +01:00
Andrew Lunn
f633a512e8 leds: wm831x: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:34 +01:00
Andrew Lunn
5029a2e336 leds: pca963x: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Cc: Ricardo Ribalda <ricardo.ribalda@gmail.com>
2016-01-04 09:57:34 +01:00
Andrew Lunn
c3482b8250 leds: pca955x: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:33 +01:00
Andrew Lunn
7c4b10a2eb leds: lp8860: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:33 +01:00
Andrew Lunn
64998371e0 leds: lp8788: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Milo Kim <milo.kim@ti.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:33 +01:00
Andrew Lunn
95b2af637e leds: lp55xx: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Milo Kim <milo.kim@ti.com>
2016-01-04 09:57:33 +01:00
Andrew Lunn
525d6a65a2 leds: lp3944: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:33 +01:00
Andrew Lunn
00a88a19d1 leds: pca9532: Remove work queue for LEDs.
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:33 +01:00
Andrew Lunn
bb58cc8141 leds: lm3642: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Daniel Jeong <daniel.jeong@ti.com>
Cc: G.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:32 +01:00
Andrew Lunn
a478851c1f leds: lm3533: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Johan Hovold <johan@kernel.org>
2016-01-04 09:57:32 +01:00
Andrew Lunn
7e1761b0ad leds: blinkm: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Jan-Simon Moeller <dl9pf@gmx.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:32 +01:00
Andrew Lunn
cd042f0106 leds: bd2802: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Kim Kyuwon <q1.kim@samsung.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:32 +01:00
Andrew Lunn
64d44e5aed leds: adp5520: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:32 +01:00
Andrew Lunn
8824fefb59 leds: 88pm860x: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:32 +01:00
Andrew Lunn
d890389f89 leds: tlc591xx: Remove work queue
Now the core implements the work queue, remove it from the driver,
and switch to using brightness_set_blocking op.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-01-04 09:57:32 +01:00
Jacek Anaszewski
9d79a05e94 leds: ktd2692: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Ingi Kim <ingi2.kim@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2016-01-04 09:57:31 +01:00
Jacek Anaszewski
269e92da8b leds: aat1290: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2016-01-04 09:57:31 +01:00
Jacek Anaszewski
7edc00d09d leds: max77693: Remove work queue
Now the core implements the work queue, remove it from the drivers,
and switch to using brightness_set_blocking op.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2016-01-04 09:57:31 +01:00
Jacek Anaszewski
13ae79bbe4 leds: core: Drivers shouldn't enforce SYNC/ASYNC brightness setting
This patch removes SET_BRIGHTNESS_ASYNC and SET_BRIGHTNESS_SYNC flags.
led_set_brightness() now calls led_set_brightness_nosleep() instead of
choosing between sync and async op basing on the flags defined by the
driver.

From now on, if a user wants to make sure that brightness will be set
synchronously, they have to use led_set_brightness_sync() API. It is now
being made publicly available since it has become apparent that it is
a caller who should decide whether brightness is to be set in
a synchronous or an asynchronous way.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-01-04 09:57:31 +01:00
Jacek Anaszewski
1afcadfcd1 leds: core: Use set_brightness_work for the blocking op
This patch makes LED core capable of setting brightness for drivers
that implement brightness_set_blocking op. It removes from LED class
drivers responsibility for using work queues on their own.

In order to achieve this set_brightness_delayed callback is being
modified to directly call one of available ops for brightness setting.

led_set_brightness_async() function didn't set brightness in an
asynchronous way in all cases. It was mistakenly assuming that all
LED subsystem drivers used work queue in their brightness_set op,
whereas only half of them did that. Since it has no users now,
it is being removed.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2016-01-04 09:57:30 +01:00