The uncore memory frequency value from the mailbox command
CONFIG_TDP_GET_MEM_FREQ needs to be scaled based on the platform for
display. There is no single constant multiplier.
This change introduces CPU model specific memory frequency multiplier.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver only covered one scenario in which ACPI devices with _HID
INT3472 are found, and its functionality has been taken over by the
intel-skl-int3472 module, so remove it.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-7-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ACPI devices with _HID INT3472 are currently matched to the tps68470
driver, however this does not cover all situations in which that _HID
occurs. We've encountered three possibilities:
1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing
a physical TPS68470 device) that requires a GPIO and OpRegion driver
2. On devices designed for Windows, an ACPI device with _HID INT3472
(again representing a physical TPS68470 device) which requires GPIO,
Clock and Regulator drivers.
3. On other devices designed for Windows, an ACPI device with _HID
INT3472 which does **not** represent a physical TPS68470, and is instead
used as a dummy device to group some system GPIO lines which are meant
to be consumed by the sensor that is dependent on this entry.
This commit adds a new module, registering a platform driver to deal
with the 3rd scenario plus an i2c driver to deal with #1 and #2, by
querying the CLDB buffer found against INT3472 entries to determine
which is most appropriate.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-6-djrscally@gmail.com
[hdegoede@redhat.com Make skl_int3472_tps68470_calc_type() static]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Export two functions from GPIO ACPI for wider use
* Clean up Whiskey Cove and Crystal Cove GPIO drivers
The following is an automated git shortlog grouped by driver:
crystalcove:
- remove platform_set_drvdata() + cleanup probe
gpiolib:
- acpi: Add acpi_gpio_get_io_resource()
- acpi: Introduce acpi_get_and_request_gpiod() helper
wcove:
- Split error handling for CTRL and IRQ registers
- Unify style of to_reg() with to_ireg()
- Use IRQ hardware number getter instead of direct access
-----BEGIN PGP SIGNATURE-----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=WHpx
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.14-1' into review-hans
intel-gpio for v5.14-1
* Export two functions from GPIO ACPI for wider use
* Clean up Whiskey Cove and Crystal Cove GPIO drivers
The following is an automated git shortlog grouped by driver:
crystalcove:
- remove platform_set_drvdata() + cleanup probe
gpiolib:
- acpi: Add acpi_gpio_get_io_resource()
- acpi: Introduce acpi_get_and_request_gpiod() helper
wcove:
- Split error handling for CTRL and IRQ registers
- Unify style of to_reg() with to_ireg()
- Use IRQ hardware number getter instead of direct access
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmCng30UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yEhggAmYRz34z7y0jQCk2gCTnijjHjvr+0
Af7+8JfpMCiXilzzraOe/3cVDY/labsfS7jvaPrSKw81EG1n/WjE9ZyXEHl5vTvw
sytdXGHzoei/RduSiWDnYZgjfWNpfDIuSbwWcFMtPuCoELdW6O7w0oUyKyiMP6Gp
CCEHsJuHGh6ErsVDdYfp+oDhF3H3WTeJxKDAvi3jp73bv7g3HgCZWWz3YUL1MZoK
twn/t9EWYQAT6bKZ3NeAUW8STuqVg/eri2oncsAk9pnQw8BqV9orfyosROcOh2nH
PdqNNe3WWuuoNq2IZ4PNOYQ0uwDrntLcVGA0QdOF4YsWQezqQXdHkltPCg==
=DG5t
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-goodix-v5.14-1' into review-hans
Signed tag for the immutable platform-drivers-x86-goodix branch for merging into the input subsystem.
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1623811809-65099-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If length equals 0 then reading buf[length-1] will read before the start
of the buffer.
Avoid this by moving the length == 0 check up.
Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-2-hdegoede@redhat.com
tlmi_priv.pwd_admin->password is an array (not a pointer), so the correct
way to check for the password being set is to check for
tlmi_priv.pwd_admin->password[0] != 0.
For the second check, replace the check with checking that auth_str is
set instead.
Cc: Mark Pearson <markpearson@lenovo.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505158 ("NO_EFFECT")
Fixes: a7314b3b1d8a ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609151752.156902-1-hdegoede@redhat.com
The dell-wmi-sysman and think-lmi kernel modules both have a global
struct class *fw_attr_class variable, leading to the following compile
errors when both are builtin:
ld: drivers/platform/x86/think-lmi.o:(.bss+0x0): multiple definition of `fw_attr_class'; drivers/platform/x86/dell/dell-wmi-sysman/sysman.o:(.bss+0x0): first defined here
In both cases the variable is only used in the file where it is declared.
Make both declarations static to avoid the linker error.
Cc: Mark Pearson <markpearson@lenovo.com>
Cc: Dell.Client.Kernel@dell.com
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210609145952.113393-1-hdegoede@redhat.com
drivers/platform/x86/intel_ips.c:832:6: warning: variable ‘ret’ set but
not used [-Wunused-but-set-variable]
832 | u16 ret;
| ^~~
Fix it by mark ret as '__maybe_unused'.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20210607014702.2981097-1-yangerkun@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of base_attr_group and hubless_base_attr_group is to pass
their addresses to sysfs_create_group() and sysfs_remove_group(), both
which takes pointers to const attribute_group structs. Make them const
to allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lore.kernel.org/r/20210605203807.60547-5-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of tc1100_attribute_group is to pass its address to
sysfs_create_group() and sysfs_remove_group(), both which takes pointer
to const attribute_group structs. Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605203807.60547-4-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of pmt_crashlog_group is to assign its address to the
attr_grp field in the intel_pmt_namespace struct, which is a pointer to
const attribute_group. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210605203807.60547-3-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The only use of hdaps_attribute_group is to pass its address to
sysfs_create_group() and sysfs_remove_group(), both which takes pointers
to const attribute_group structs. Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Frank Seidel <frank@f-seidel.de>
Link: https://lore.kernel.org/r/20210605203807.60547-2-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Using list_move_tail() instead of list_del() + list_add_tail() in ssh_packet_layer.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210609072448.1357524-1-libaokun1@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Using list_move_tail() instead of list_del() + list_add_tail() in ssh_request_layer.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210609072638.1358174-1-libaokun1@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The status variable in ssam_nf_refcount_disable_free() is only set when
the reference count equals zero. Otherwise, it is returned
uninitialized. Fix this by always initializing status to zero.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 640ee17199e4 ("platform/surface: aggregator: Allow enabling of events without notifiers")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604210907.25738-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update the controller-device user-space interface (cdev) documentation
for the newly introduced IOCTLs and event interface.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-8-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mark functions with locking requirements via the corresponding lockdep
calls for debugging and documentary purposes.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While events can already be enabled and disabled via the generic request
IOCTL, this bypasses the internal reference counting mechanism of the
controller. Due to that, disabling an event will turn it off regardless
of any other client having requested said event, which may break
functionality of that client.
To solve this, add IOCTLs wrapping the ssam_controller_event_enable()
and ssam_controller_event_disable() functions, which have been
previously introduced for this specific purpose.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, debugging unknown events requires writing a custom driver.
This is somewhat difficult, slow to adapt, and not entirely
user-friendly for quickly trying to figure out things on devices of some
third-party user. We can do better. We already have a user-space
interface intended for debugging SAM EC requests, so let's add support
for receiving events to that.
This commit provides support for receiving events by reading from the
controller file. It additionally introduces two new IOCTLs to control
which event categories will be forwarded. Specifically, a user-space
client can specify which target categories it wants to receive events
from by registering the corresponding notifier(s) via the IOCTLs and
after that, read the received events by reading from the controller
device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We can already enable and disable SAM events via one of two ways: either
via a (non-observer) notifier tied to a specific event group, or a
generic event enable/disable request. In some instances, however,
neither method may be desirable.
The first method will tie the event enable request to a specific
notifier, however, when we want to receive notifications for multiple
event groups of the same target category and forward this to the same
notifier callback, we may receive duplicate events, i.e. one event per
registered notifier. The second method will bypass the internal
reference counting mechanism, meaning that a disable request will
disable the event regardless of any other client driver using it, which
may break the functionality of that driver.
To address this problem, add new functions that allow enabling and
disabling of events via the event reference counting mechanism built
into the controller, without needing to register a notifier.
This can then be used in combination with observer notifiers to process
multiple events of the same target category without duplication in the
same callback function.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604134755.535590-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, each SSAM event notifier is directly tied to one group of
events. This makes sense as registering a notifier will automatically
take care of enabling the corresponding event group and normally drivers
only need notifications for a very limited number of events, associated
with different callbacks for each group.
However, there are rare cases, especially for debugging, when we want to
get notifications for a whole event target category instead of just a
single group of events in that category. Registering multiple notifiers,
i.e. one per group, may be infeasible due to two issues: a) we might not
know every event enable/disable specification as some events are
auto-enabled by the EC and b) forwarding this to the same callback will
lead to duplicate events as we might not know the full event
specification to perform the appropriate filtering.
This commit introduces observer-notifiers, which are notifiers that are
not tied to a specific event group and do not attempt to manage any
events. In other words, they can be registered without enabling any
event group or incrementing the corresponding reference count and just
act as silent observers, listening to all currently/previously enabled
events based on their match-specification.
Essentially, this allows us to register one single notifier for a full
event target category, meaning that we can process all events of that
target category in a single callback without duplication. Specifically,
this will be used in the cdev debug interface to forward events to
user-space via a device file from which the events can be read.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210604134755.535590-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It causes mlxreg-hotplug probing failure: request_threaded_irq()
returns -EINVAL due to true value of condition:
((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN))
after flag "IRQF_NO_AUTOEN" has been added to:
err = devm_request_irq(&pdev->dev, priv->irq,
mlxreg_hotplug_irq_handler, IRQF_TRIGGER_FALLING
| IRQF_SHARED | IRQF_NO_AUTOEN,
"mlxreg-hotplug", priv);
This reverts commit bee3ecfed0 ("platform/mellanox: mlxreg-hotplug: move
to use request_irq by IRQF_NO_AUTOEN flag").
Signed-off-by: Mykola Kostenok <c_mykolak@nvidia.com>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210603172827.2599908-1-c_mykolak@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When we fail to open the device file due to DTX being shut down, the
mutex is initialized but never destroyed. We are destroying it when
releasing the file, so add the missing call in the failure path as well.
Fixes: 1d60999283 ("platform/surface: Add DTX driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210604132540.533036-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
drivers/platform/x86/firmware_attributes_class.c:11:5: warning: symbol 'fw_attr_inuse' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210603153936.GA65404@7832cb195c0b
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The struct tlmi_pwd_setting display_name member is initialized,
but never read. Remove it and the TLMI_PWDTYPE_MAXLEN define.
While at it also remove some other unused [MAX]LEN defines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210531135911.82582-1-hdegoede@redhat.com
For Lenovo platforms that support a WMI interface to the BIOS add
support, using the firmware-attributes class, to allow users to access
and modify various BIOS related settings.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-3-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update Dell WMI sysman driver to use newly implemented helper module.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-2-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This offers shared code for registering the firmware_attributes_class,
which is used by the Dell and Lenovo WMI management drivers.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210530223111.25929-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Disabling events silently fails due to the wrong command ID being used.
Instead of the command ID for the disable call, the command ID for the
enable call was being used. This causes the disable call to enable the
event instead. As the event is already enabled when we call this
function, the EC silently drops this command and does nothing.
Use the correct command ID for disabling the event to fix this.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210603000636.568846-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'error'.
Eliminate the follow smatch warning:
drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard()
warn: missing error code 'error'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix the comment on the entry for the Chuwi Hi10 Pro tablet:
1. Replace "Prus" type with "Pro".
2. Fix the model number, the Chuwi Hi10 Pro is the CWI529, not the CWI597.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210530104744.6720-1-hdegoede@redhat.com
add support for Dell privacy driver for the Dell units equipped
hardware privacy design, which protect users privacy of audio and
camera from hardware level. Once the audio or camera privacy mode
activated, any applications will not get any audio or video stream
when user pressed ctrl+F4 hotkey, audio privacy mode will be
enabled, micmute led will be also changed accordingly
The micmute led is fully controlled by hardware & EC(embedded controller)
and camera mute hotkey is Ctrl+F9. Currently design only emits
SW_CAMERA_LENS_COVER event while the camera lens shutter will be
changed by EC & HW(hardware) control
*The flow is like this:
1) User presses key. HW does stuff with this key (timeout timer is started)
2) WMI event is emitted from BIOS to kernel
3) WMI event is received by dell-privacy
4) KEY_MICMUTE emitted from dell-privacy
5) Userland picks up key and modifies kcontrol for SW mute
6) Codec kernel driver catches and calls ledtrig_audio_set
7) dell-privacy notifies EC, the timeout is cancelled and the HW mute
is activated. If the EC is not notified then the HW mic mute will
activate when the timeout triggers, just a bit later than with the
active ack.
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210506115605.1504-1-Perry_Yuan@Dell.com
[hdegoede@redhat.com: Rework Kconfig/Makefile bits + other small fixups]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename dell-wmi.c to dell-wmi-base.c, so that we can have other
dell-wmi-foo.c files which can be added to dell-wmi.ko as "plugins"
controlled by separate boolean Kconfig options.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.
Signed-off-by: Til Jasper Ullrich <tju@tju.me>
Link: https://lore.kernel.org/r/20210525150950.14805-1-tju@tju.me
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
VPC event bit 10 gets set on a Yoga 300-11IBR when the EC believes that the
device has changed between laptop/tent/stand/tablet mode.
The EC relies on getting angle info from 2 accelerometers through a special
windows service calling a DSM on the DUAL250E ACPI-device. Linux does not
do this, making the laptop/tent/stand/tablet mode info unreliable.
Ignore VPC event bit 10 to avoid the warnings triggered by the default case
in ideapad_acpi_notify().
Note that the plan for Linux is to have iio-sensor-proxy read the 2
accelerometers and have it provide info about which mode 360° hinges
2-in-1s to the rest of userspace:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210523172331.177834-1-hdegoede@redhat.com
5th- and 6th-generation Surface devices have all SAM clients defined in
ACPI, except for the platform profile/performance mode which his handled
via the WSID (Windows Surface Integration Device). Thus, the node groups
for those devices are the same and we can just use a single one instead
of re-defining the same one over and over again.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for the 13" Intel version of the Surface Laptop 4.
Use the existing node group for the Surface Laptop 3 since the 15" AMD
version already shares its WSID HID with its predecessor and there don't
seem to be any significant differences with regards to SAM.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The 15" AMD version of the Surface Laptop 4 shares its WSID HID with the
15" AMD version of the Surface Laptop 3. Update the comments
accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The quirks added to asus-nb-wmi for the ASUS ROG Zephyrus G14 and G15 are
wrong, they tell the asus-wmi code to use the vendor specific WMI backlight
interface. But there is no such interface on these laptops.
As a side effect, these quirks stop the acpi_video driver to register since
they make acpi_video_get_backlight_type() return acpi_backlight_vendor,
leaving only the native AMD backlight driver in place, which is the one we
want. This happy coincidence is being replaced with a new quirk in
drivers/acpi/video_detect.c which actually sets the backlight_type to
acpi_backlight_native fixinf this properly. This reverts
commit 13bceda68f ("platform/x86: asus-nb-wmi: add support for ASUS ROG
Zephyrus G14 and G15").
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-3-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is a preparation revert for reverting the "add support for ASUS ROG
Zephyrus G14 and G15" change. This reverts
commit 67186653c9 ("platform/x86: asus-nb-wmi: Drop duplicate DMI quirk
structures")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20210419074915.393433-2-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This driver was originally intended to support some HP laptops, but
later support was added for Xioami and AMD laptops.
Rename it to make it clear that it supports a larger variety of
systems.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20210519174405.30155-1-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Those blobs can only be read. So, don't confuse users with 'writable'
flags. Also, remove S_IFREG because debugfs takes care of that.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210517100746.29663-2-wsa+renesas@sang-engineering.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
