A panic was discovered by Chirag Jog where a BUG_ON sanity check
in the new "pushable_task" logic would trigger a panic under
certain circumstances:
http://lkml.org/lkml/2008/9/25/189
Gilles Carry discovered that the root cause was attributed to the
pushable_tasks list getting corrupted in the push_rt_task logic.
This was the result of a dropped rq lock in double_lock_balance
allowing a task in the process of being pushed to potentially migrate
away, and thus corrupt the pushable_tasks() list.
I traced back the problem as introduced by the pushable_tasks patch
that went in recently. There is a "retry" path in push_rt_task()
that actually had a compound conditional to decide whether to
retry or exit. I missed the meaning behind the rationale for the
virtual "if(!task) goto out;" portion of the compound statement and
thus did not handle it properly. The new pushable_tasks logic
actually creates three distinct conditions:
1) an untouched and unpushable task should be dequeued
2) a migrated task where more pushable tasks remain should be retried
3) a migrated task where no more pushable tasks exist should exit
The original logic mushed (1) and (3) together, resulting in the
system dequeuing a migrated task (against an unlocked foreign run-queue
nonetheless).
To fix this, we get rid of the notion of "paranoid" and we support the
three unique conditions properly. The paranoid feature is no longer
relevant with the new pushable logic (since pushable naturally limits
the loop) anyway, so lets just remove it.
Reported-By: Chirag Jog <chirag@linux.vnet.ibm.com>
Found-by: Gilles Carry <gilles.carry@bull.net>
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
The RT scheduler employs a "push/pull" design to actively balance tasks
within the system (on a per disjoint cpuset basis). When a task is
awoken, it is immediately determined if there are any lower priority
cpus which should be preempted. This is opposed to the way normal
SCHED_OTHER tasks behave, which will wait for a periodic rebalancing
operation to occur before spreading out load.
When a particular RQ has more than 1 active RT task, it is said to
be in an "overloaded" state. Once this occurs, the system enters
the active balancing mode, where it will try to push the task away,
or persuade a different cpu to pull it over. The system will stay
in this state until the system falls back below the <= 1 queued RT
task per RQ.
However, the current implementation suffers from a limitation in the
push logic. Once overloaded, all tasks (other than current) on the
RQ are analyzed on every push operation, even if it was previously
unpushable (due to affinity, etc). Whats more, the operation stops
at the first task that is unpushable and will not look at items
lower in the queue. This causes two problems:
1) We can have the same tasks analyzed over and over again during each
push, which extends out the fast path in the scheduler for no
gain. Consider a RQ that has dozens of tasks that are bound to a
core. Each one of those tasks will be encountered and skipped
for each push operation while they are queued.
2) There may be lower-priority tasks under the unpushable task that
could have been successfully pushed, but will never be considered
until either the unpushable task is cleared, or a pull operation
succeeds. The net result is a potential latency source for mid
priority tasks.
This patch aims to rectify these two conditions by introducing a new
priority sorted list: "pushable_tasks". A task is added to the list
each time a task is activated or preempted. It is removed from the
list any time it is deactivated, made current, or fails to push.
This works because a task only needs to be attempted to push once.
After an initial failure to push, the other cpus will eventually try to
pull the task when the conditions are proper. This also solves the
problem that we don't completely analyze all tasks due to encountering
an unpushable tasks. Now every task will have a push attempted (when
appropriate).
This reduces latency both by shorting the critical section of the
rq->lock for certain workloads, and by making sure the algorithm
considers all eligible tasks in the system.
[ rostedt: added a couple more BUG_ONs ]
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
We currently run class->post_schedule() outside of the rq->lock, which
means that we need to test for the need to post_schedule outside of
the lock to avoid a forced reacquistion. This is currently not a problem
as we only look at rq->rt.overloaded. However, we want to enhance this
going forward to look at more state to reduce the need to post_schedule to
a bare minimum set. Therefore, we introduce a new member-func called
needs_post_schedule() which tests for the post_schedule condtion without
actually performing the work. Therefore it is safe to call this
function before the rq->lock is released, because we are guaranteed not
to drop the lock at an intermediate point (such as what post_schedule()
may do).
We will use this later in the series
[ rostedt: removed paranoid BUG_ON ]
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
double_lock balance() currently favors logically lower cpus since they
often do not have to release their own lock to acquire a second lock.
The result is that logically higher cpus can get starved when there is
a lot of pressure on the RQs. This can result in higher latencies on
higher cpu-ids.
This patch makes the algorithm more fair by forcing all paths to have
to release both locks before acquiring them again. Since callsites to
double_lock_balance already consider it a potential preemption/reschedule
point, they have the proper logic to recheck for atomicity violations.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
git-id c4acb2c066 attempted to limit
newidle critical section length by stopping after at least one task
was moved. Further investigation has shown that there are other
paths nested further inside the algorithm which still remain that allow
long latencies to occur with newidle balancing. This patch applies
the same technique inside balance_tasks() to limit the duration of
this optional balancing operation.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
CC: Nick Piggin <npiggin@suse.de>
There is no sense in wasting time trying to push a task away that
cannot move anywhere else. We gain no benefit from trying to push
other tasks at this point, so if the task being woken up is non
migratable, just skip the whole operation. This reduces overhead
in the wakeup path for certain tasks.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
We currently take the rq->lock for every cpu in an overload state during
pull_rt_tasks(). However, we now have enough information via the
highest_prio.[curr|next] fields to determine if there is any tasks of
interest to warrant the overhead of the rq->lock, before we actually take
it. So we use this information to reduce lock contention during the
pull for the case where the source-rq doesnt have tasks that preempt
the current task.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
highest_prio.curr is actually a more accurate way to keep track of
the pull_rt_task() threshold since it is always up to date, even
if the "next" task migrates during double_lock. Therefore, stop
looking at the "next" task object and simply use the highest_prio.curr.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
We will use this later in the series to reduce the amount of rq-lock
contention during a pull operation
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Andrew Morton reported:
> kernel/sched.c: In function 'schedule':
> kernel/sched.c:3679: warning: 'active_balance' may be used uninitialized in this function
>
> This warning is correct - the code is buggy.
In sched.c load_balance_newidle, there's real potential use of
uninitialised variable - fix it.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix cpumask conversion bug
this warning:
kernel/sched.c: In function ‘find_busiest_group’:
kernel/sched.c:3429: warning: passing argument 1 of ‘__first_cpu’ from incompatible pointer type
shows that we forgot to convert a new patch to the new cpumask APIs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: tweak task balancing to save power more agressively
Active load balancing is a process by which migration thread
is woken up on the target CPU in order to pull current
running task on another package into this newly idle
package.
This method is already in use with normal load_balance(),
this patch introduces this method to new idle cpus when
sched_mc is set to POWERSAVINGS_BALANCE_WAKEUP.
This logic provides effective consolidation of short running
daemon jobs in a almost idle system
The side effect of this patch may be ping-ponging of tasks
if the system is moderately utilised. May need to adjust the
iterations before triggering.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: tweak task wakeup to save power more agressively
Preferred wakeup cpu (from a semi idle package) has been
nominated in find_busiest_group() in the previous patch. Use
this information in sched_mc_preferred_wakeup_cpu in function
wake_idle() to bias task wakeups if the following conditions
are satisfied:
- The present cpu that is trying to wakeup the process is
idle and waking the target process on this cpu will
potentially wakeup a completely idle package
- The previous cpu on which the target process ran is
also idle and hence selecting the previous cpu may
wakeup a semi idle cpu package
- The task being woken up is allowed to run in the
nominated cpu (cpu affinity and restrictions)
Basically if both the current cpu and the previous cpu on
which the task ran is idle, select the nominated cpu from semi
idle cpu package for running the new task that is waking up.
Cache hotness is considered since the actual biasing happens
in wake_idle() only if the application is cache cold.
This technique will effectively move short running bursty jobs in
a mostly idle system.
Wakeup biasing for power savings gets automatically disabled if
system utilisation increases due to the fact that the probability
of finding both this_cpu and prev_cpu idle decreases.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend load-balancing code (no change in behavior yet)
When the system utilisation is low and more cpus are idle,
then the process waking up from sleep should prefer to
wakeup an idle cpu from semi-idle cpu package (multi core
package) rather than a completely idle cpu package which
would waste power.
Use the sched_mc balance logic in find_busiest_group() to
nominate a preferred wakeup cpu.
This info can be stored in appropriate sched_domain, but
updating this info in all copies of sched_domain is not
practical. Hence this information is stored in root_domain
struct which is one copy per partitioned sched domain.
The root_domain can be accessed from each cpu's runqueue
and there is one copy per partitioned sched domain.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change load-balancing direction to match that of irqbalanced
Just in case two groups have identical load, prefer to move load to lower
logical cpu number rather than the present logic of moving to higher logical
number.
find_busiest_group() tries to look for a group_leader that has spare capacity
to take more tasks and freeup an appropriate least loaded group. Just in case
there is a tie and the load is equal, then the group with higher logical number
is favoured. This conflicts with user space irqbalance daemon that will move
interrupts to lower logical number if the system utilisation is very low.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend range of /sys/devices/system/cpu/sched_mc_power_savings
Currently the sched_mc/smt_power_savings variable is a boolean,
which either enables or disables topology based power savings.
This patch extends the behaviour of the variable from boolean to
multivalued, such that based on the value, we decide how
aggressively do we want to perform powersavings balance at
appropriate sched domain based on topology.
Variable levels of power saving tunable would benefit end user to
match the required level of power savings vs performance
trade-off depending on the system configuration and workloads.
This version makes the sched_mc_power_savings global variable to
take more values (0,1,2). Later versions can have a single
tunable called sched_power_savings instead of
sched_{mc,smt}_power_savings.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes
if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:
- make irq_desc to go with affinity aka irq_desc moving etc
- call move_irq_desc in irq_complete_move()
- legacy irq_desc is not moved, because they are allocated via static array
for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a cgroup is removed, it's unlinked from its parent's children list,
but not actually freed until the last dentry on it is released (at which
point cgrp->root->number_of_cgroups is decremented).
Currently rebind_subsystems checks for the top cgroup's child list being
empty in order to rebind subsystems into or out of a hierarchy - this can
result in the set of subsystems bound to a hierarchy being
removed-but-not-freed cgroup.
The simplest fix for this is to forbid remounts that change the set of
subsystems on a hierarchy that has removed-but-not-freed cgroups. This
bug can be reproduced via:
mkdir /mnt/cg
mount -t cgroup -o ns,freezer cgroup /mnt/cg
mkdir /mnt/cg/foo
sleep 1h < /mnt/cg/foo &
rmdir /mnt/cg/foo
mount -t cgroup -o remount,ns,devices,freezer cgroup /mnt/cg
kill $!
Though the above will cause oops in -mm only but not mainline, but the bug
can cause memory leak in mainline (and even oops)
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 5b7dba4ff8, which
caused a regression in hibernate, reported by and bisected by Fabio
Comolli.
This revert fixes
http://bugzilla.kernel.org/show_bug.cgi?id=12155http://bugzilla.kernel.org/show_bug.cgi?id=12149
Bisected-by: Fabio Comolli <fabio.comolli@gmail.com>
Requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: change calling convention of existing clock_event APIs
struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.
Another single-patch change. For safety, we BUG_ON() in
clockevents_register_device() if it's not set.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Impact: change existing irq_chip API
Not much point with gentle transition here: the struct irq_chip's
setaffinity method signature needs to change.
Fortunately, not widely used code, but hits a few architectures.
Note: In irq_select_affinity() I save a temporary in by mangling
irq_desc[irq].affinity directly. Ingo, does this break anything?
(Folded in fix from KOSAKI Motohiro)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: jeremy@xensource.com
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Impact: change calling convention of existing cpumask APIs
Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.
These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
Impact: cleanup
Each SMP arch defines these themselves. Move them to a central
location.
Twists:
1) Some archs (m32, parisc, s390) set possible_map to all 1, so we add a
CONFIG_INIT_ALL_POSSIBLE for this rather than break them.
2) mips and sparc32 '#define cpu_possible_map phys_cpu_present_map'.
Those archs simply have phys_cpu_present_map replaced everywhere.
3) Alpha defined cpu_possible_map to cpu_present_map; this is tricky
so I just manipulate them both in sync.
4) IA64, cris and m32r have gratuitous 'extern cpumask_t cpu_possible_map'
declarations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
Cc: ink@jurassic.park.msu.ru
Cc: rmk@arm.linux.org.uk
Cc: starvik@axis.com
Cc: tony.luck@intel.com
Cc: takata@linux-m32r.org
Cc: ralf@linux-mips.org
Cc: grundler@parisc-linux.org
Cc: paulus@samba.org
Cc: schwidefsky@de.ibm.com
Cc: lethal@linux-sh.org
Cc: wli@holomorphy.com
Cc: davem@davemloft.net
Cc: jdike@addtoit.com
Cc: mingo@redhat.com
We merge the irq/sparseirq, x86/quirks and x86/reboot trees into the
cpus4096 tree because the io-apic changes in the sparseirq change
conflict with the cpumask changes in the cpumask tree, and we
want to resolve those.
arch_reinit_sched_domains() used to call arch_update_cpu_topology()
via arch_init_sched_domains(). This call got lost with
e761b77252 ("cpu hotplug, sched: Introduce
cpu_active_map and redo sched domain managment (take 2)".
So we might end up with outdated and missing cpus in the cpu core
maps (architecture used to call arch_reinit_sched_domains if cpu
topology changed).
This adds a call to arch_update_cpu_topology in partition_sched_domains
which gets called whenever scheduling domains get updated. Which is
what is supposed to happen when cpu topology changes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change arch_update_cpu_topology so it returns 1 if the cpu topology changed
and 0 if it didn't change. This will be useful for the next patch which adds
a call to this function in partition_sched_domains.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lee Schermerhorn noticed yesterday that I broke the mapping_writably_mapped
test in 2.6.7! Bad bad bug, good good find.
The i_mmap_writable count must be incremented for VM_SHARED (just as
i_writecount is for VM_DENYWRITE, but while holding the i_mmap_lock)
when dup_mmap() copies the vma for fork: it has its own more optimal
version of __vma_link_file(), and I missed this out. So the count
was later going down to 0 (dangerous) when one end unmapped, then
wrapping negative (inefficient) when the other end unmapped.
The only impact on x86 would have been that setting a mandatory lock on
a file which has at some time been opened O_RDWR and mapped MAP_SHARED
(but not necessarily PROT_WRITE) across a fork, might fail with -EAGAIN
when it should succeed, or succeed when it should fail.
But those architectures which rely on flush_dcache_page() to flush
userspace modifications back into the page before the kernel reads it,
may in some cases have skipped the flush after such a fork - though any
repetitive test will soon wrap the count negative, in which case it will
flush_dcache_page() unnecessarily.
Fix would be a two-liner, but mapping variable added, and comment moved.
Reported-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miles Lane tailing /sys files hit a BUG which Pekka Enberg has tracked
to my 966c8c12dc sprint_symbol(): use
less stack exposing a bug in slub's list_locations() -
kallsyms_lookup() writes a 0 to namebuf[KSYM_NAME_LEN-1], but that was
beyond the end of page provided.
The 100 slop which list_locations() allows at end of page looks roughly
enough for all the other stuff it might print after the symbol before
it checks again: break out KSYM_SYMBOL_LEN earlier than before.
Latencytop and ftrace and are using KSYM_NAME_LEN buffers where they
need KSYM_SYMBOL_LEN buffers, and vmallocinfo a 2*KSYM_NAME_LEN buffer
where it wants a KSYM_SYMBOL_LEN buffer: fix those before anyone copies
them.
[akpm@linux-foundation.org: ftrace.h needs module.h]
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc Miles Lane <miles.lane@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running kmemtraced, which uses splice() on relayfs, causes a hard lock on
x86-64 SMP. As described by Tom Zanussi:
It looks like you hit the same problem as described here:
commit 8191ecd1d1
splice: fix infinite loop in generic_file_splice_read()
relay uses the same loop but it never got noticed or fixed.
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: fix possible deadlock in CPU hot-remove path
This patch fixes a possible deadlock scenario in the CPU remove path.
migration_call grabs rq->lock, then wakes up everything on rq->migration_queue
with the lock held. Then one of the tasks on the migration queue ends up
calling tg_shares_up which then also tries to acquire the same rq->lock.
[c000000058eab2e0] c000000000502078 ._spin_lock_irqsave+0x98/0xf0
[c000000058eab370] c00000000008011c .tg_shares_up+0x10c/0x20c
[c000000058eab430] c00000000007867c .walk_tg_tree+0xc4/0xfc
[c000000058eab4d0] c0000000000840c8 .try_to_wake_up+0xb0/0x3c4
[c000000058eab590] c0000000000799a0 .__wake_up_common+0x6c/0xe0
[c000000058eab640] c00000000007ada4 .complete+0x54/0x80
[c000000058eab6e0] c000000000509fa8 .migration_call+0x5fc/0x6f8
[c000000058eab7c0] c000000000504074 .notifier_call_chain+0x68/0xe0
[c000000058eab860] c000000000506568 ._cpu_down+0x2b0/0x3f4
[c000000058eaba60] c000000000506750 .cpu_down+0xa4/0x108
[c000000058eabb10] c000000000507e54 .store_online+0x44/0xa8
[c000000058eabba0] c000000000396260 .sysdev_store+0x3c/0x50
[c000000058eabc10] c0000000001a39b8 .sysfs_write_file+0x124/0x18c
[c000000058eabcd0] c00000000013061c .vfs_write+0xd0/0x1bc
[c000000058eabd70] c0000000001308a4 .sys_write+0x68/0x114
[c000000058eabe30] c0000000000086b4 syscall_exit+0x0/0x40
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Delete excess kernel-doc notation in kernel/auditsc.c:
Warning(linux-2.6.27-git10//kernel/auditsc.c:1481): Excess function parameter or struct member 'tsk' description in 'audit_syscall_entry'
Warning(linux-2.6.27-git10//kernel/auditsc.c:1564): Excess function parameter or struct member 'tsk' description in 'audit_syscall_exit'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently audit=0 on the kernel command line does absolutely nothing.
Audit always loads and always uses its resources such as creating the
kernel netlink socket. This patch causes audit=0 to actually disable
audit. Audit will use no resources and starting the userspace auditd
daemon will not cause the kernel audit system to activate.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
this warning:
kernel/trace/trace.c: In function ‘trace_vprintk’:
kernel/trace/trace.c:3626: warning: ‘flags’ may be used uninitialized in this function
shows some confusion about irq_flags / flags use here. We already have
irq_flags so remove the extra flags variable.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix SD_BALANCE_NEWIDLEand broaden its use
load_balance_newidle() does not get called if SD_BALANCE_NEWIDLE is
set at higher level domain (3-CPU) and not in low level domain (2-MC).
pulled_task is initialised to -1 and checked for non-zero which is
always true if the lowest level sched_domain does not have
SD_BALANCE_NEWIDLE flag set.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Provide a way to pause the function graph tracer
As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Apply some suggestions of Steven Rostedt:
_turn tracing_selftest_running into a simple int (no need of an atomic_t)
_set it __read_mostly
_fix a comment style
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: trace more functions
When the function graph tracer is configured, three more files are not
traced to prevent only four functions to be traced. And this impacts the
normal function tracer too.
arch/x86/kernel/process_64/32.c:
I had crashes when I let this file traced. After some debugging, I saw
that the "current" task point was changed inside__swtich_to(), ie:
"write_pda(pcurrent, next_p);" inside process_64.c Since the tracer store
the original return address of the function inside current, we had
crashes. Only __switch_to() has to be excluded from tracing.
kernel/module.c and kernel/extable.c:
Because of a function used internally by the function graph tracer:
__kernel_text_address()
To let the other functions inside these files to be traced, this patch
introduces the __notrace_funcgraph function prefix which is __notrace if
function graph tracer is configured and nothing if not.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature
Problem on distro kernels: irq_desc[NR_IRQS] takes megabytes of RAM with
NR_CPUS set to large values. The goal is to be able to scale up to much
larger NR_IRQS value without impacting the (important) common case.
To solve this, we generalize irq_desc[NR_IRQS] to an (optional) array of
irq_desc pointers.
When CONFIG_SPARSE_IRQ=y is used, we use kzalloc_node to get irq_desc,
this also makes the IRQ descriptors NUMA-local (to the site that calls
request_irq()).
This gets rid of the irq_cfg[] static array on x86 as well: irq_cfg now
uses desc->chip_data for x86 to store irq_cfg.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: optimize the sched domains tree some more
The addition of SD_SERIALIZE flag added to SD_NODE_INIT prevented top level
dummy numa sched_domain to be properly degenerated on non-numa smp machine.
The reason is that in sd_parent_degenerate(), it found that the child and
parent does not have comon sched_domain flags due to SD_SERIALIZE. However,
for non-numa smp box, the top level is a dummy with a single sched_group.
Filter out SD_SERIALIZE if it is on non-numa machine to properly degenerate
top level node sched_domain. this will cut back some of the sd domain walk
in the load balancer code.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
