Commit Graph

8647 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
14a43e69ed powerpc/powernv: Basic support for OPAL
Add definition of OPAL interfaces along with  the wrappers to call
into OPAL runtime and the early device-tree parsing hook to locate
the OPAL runtime firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:50 +10:00
Benjamin Herrenschmidt
817c21ad9a powerpc/powernv: Get kernel command line accross OPAL takeover
We stash it in boot_command_line which isn't in BSS and so won't
be overwritten. We then use that as a default cmd_line before
we walk the device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:48 +10:00
Benjamin Herrenschmidt
27f4488872 powerpc/powernv: Add OPAL takeover from PowerVM
On machines supporting the OPAL firmware version 1, the system
is initially booted under pHyp. We then use a special hypercall
to verify if OPAL is available and if it is, we then trigger
a "takeover" which disables pHyp and loads the OPAL runtime
firmware, giving control to the kernel in hypervisor mode.

This patch add the necessary code to detect that the OPAL takeover
capability is present when running under PowerVM (aka pHyp) and
perform said takeover to get hypervisor control of the processor.

To perform the takeover, we must first use RTAS (within Open
Firmware runtime environment) to start all processors & threads,
in order to give control to OPAL on all of them. We then call
the takeover hypercall on everybody, OPAL will re-enter the kernel
main entry point passing it a flat device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:47 +10:00
Benjamin Herrenschmidt
344eb010b2 powerpc/powernv: Add CPU hotplug support
Unplugged CPU go into NAP mode in a loop until woken up

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:45 +10:00
Benjamin Herrenschmidt
55190f8878 powerpc: Add skeleton PowerNV platform
This adds a skeletton for the new Power "Non Virtualized"
platform which will be used by machines supporting running
without an hypervisor, for example in order to run KVM.

These machines will be using a new firmware called OPAL
for which the support will be provided by later patches.

The PowerNV platform is intended to be also usable under
the BML environment used internally for early CPU bringup
which is why the code also supports using RTAS instead of
OPAL in various places.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:25 +10:00
Benjamin Herrenschmidt
e550592e68 powerpc/powernv: Don't clobber r9 in relative_toc()
With OPAL, r8 and r9 will be used to pass the OPAL base and entry
for debugging purposes (those informations are also in the
device-tree). We don't want to clobber those registers that
early.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:24 +10:00
Benjamin Herrenschmidt
781fb7a3e4 powerpc/pci: Call pcie_bus_configure_settings()
This new function is used to properly setup the PCI Express Max Payload Size
(and in some circumstances Max Read Request Size).

Some systems will not operate properly if these aren't set correctly and
the firmware doesn't always do it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:24 +10:00
Benjamin Herrenschmidt
fb82b83970 powerpc/smp: More generic support for "soft hotplug"
This adds more generic support for doing CPU hotplug with a simple
idle loop and no actual reset of the processors. The generic
smp_generic_kick_cpu() does the hotplug bringup trick if the PACA
shows that the CPU has already been started at boot and we provide
an accessor for the CPU state.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:24 +10:00
Benjamin Herrenschmidt
b8bb922c68 powerpc/udbg: Fix Kconfig entry for avoiding 44x early debug with KVM
It was preventing the global early debug selection whenever KVM was enabled
instead of only preventing the 440 specific one.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:24 +10:00
Anton Blanchard
8bdafa39a4 powerpc: Fix deadlock in icswx code
The icswx code introduced an A-B B-A deadlock:

     CPU0                    CPU1
     ----                    ----
lock(&anon_vma->mutex);
                             lock(&mm->mmap_sem);
                             lock(&anon_vma->mutex);
lock(&mm->mmap_sem);

Instead of using the mmap_sem to keep mm_users constant, take the
page table spinlock.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:23 +10:00
Anton Blanchard
a11940978b powerpc: Fix oops when echoing bad values to /sys/devices/system/memory/probe
If we echo an address the hypervisor doesn't like to
/sys/devices/system/memory/probe we oops the box:

# echo 0x10000000000 > /sys/devices/system/memory/probe

kernel BUG at arch/powerpc/mm/hash_utils_64.c:541!

The backtrace is:

create_section_mapping
arch_add_memory
add_memory
memory_probe_store
sysdev_class_store
sysfs_write_file
vfs_write
SyS_write

In create_section_mapping we BUG if htab_bolt_mapping returned
an error. A better approach is to return an error which will
propagate back to userspace.

Rerunning the test with this patch applied:

# echo 0x10000000000 > /sys/devices/system/memory/probe
-bash: echo: write error: Invalid argument

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:23 +10:00
Anton Blanchard
dfbe93a222 powerpc: Coding style cleanups
While converting code to use for_each_node_by_type I noticed a
number of coding style issues.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:23 +10:00
Anton Blanchard
94db7c5e14 powerpc: Use for_each_node_by_type instead of open coding it
Use for_each_node_by_type instead of open coding it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:23 +10:00
Anton Blanchard
6083184269 powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nid
During memory hotplug testing, I got the following warning:

ERROR: Bad of_node_put() on /memory@0

of_node_release
kref_put
of_node_put
of_find_node_by_type
hot_add_node_scn_to_nid
hot_add_scn_to_nid
memory_add_physaddr_to_nid
...

of_find_node_by_type() loop does the of_node_put for us so we only
need the handle the case where we terminate the loop early.

As suggested by Stephen Rothwell we can do the of_node_put
unconditionally outside of the loop since of_node_put handles a
NULL argument fine.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:22 +10:00
Anton Blanchard
e377bc5d49 powerpc/numa: Remove duplicate RECLAIM_DISTANCE definition
We have two identical definitions of RECLAIM_DISTANCE, looks like
the patch got applied twice. Remove one.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:22 +10:00
Anton Blanchard
7bebcf0925 powerpc/numa: Disable NEWIDLE balancing at node level
On big POWER7 boxes we see large amounts of CPU time in system
processes like workqueue and watchdog kernel threads.

We currently rebalance the entire machine each time a task goes
idle and this is very expensive on large machines. Disable newidle
balancing at the node level and rely on the scheduler tick to
rebalance across nodes.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:22 +10:00
Anton Blanchard
d4761ad2ef powerpc/numa: Increase SD_NODES_PER_DOMAIN to 32.
The largest POWER7 boxes have 32 nodes. SD_NODES_PER_DOMAIN groups
nodes into chunks of 16 and adds a global balancing domain
(SD_ALLNODES) above it.

If we bump SD_NODES_PER_DOMAIN to 32, then we avoid this extra
level of balancing on our largest boxes.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:22 +10:00
Anton Blanchard
a200d8e446 powerpc/numa: Enable SD_WAKE_AFFINE in node definition
When chasing a performance issue on ppc64, I noticed tasks
communicating via a pipe would often end up on different nodes.

It turns out SD_WAKE_AFFINE is not set in our node defition. Commit
9fcd18c9e6 (sched: re-tune balancing) enabled SD_WAKE_AFFINE
in the node definition for x86 and we need a similar change for
ppc64.

I used lmbench lat_ctx and perf bench pipe to verify this fix. Each
benchmark was run 10 times and the average taken.

lmbench lat_ctx:

before:  66565 ops/sec
after:  204700 ops/sec

3.1x faster

perf bench pipe:

before: 5.6570 usecs
after:  1.3470 usecs

4.2x faster

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:21 +10:00
Benjamin Herrenschmidt
1cce058b29 Merge remote-tracking branch 'origin/master' into next
(Merge in order to get the PCIe mps/mrss code fixes)
2011-09-20 15:52:38 +10:00
Hector Martin
c26afe9e85 powerpc/ps3: Add gelic udbg driver
Add a new udbg driver for the PS3 gelic Ehthernet device.

This driver shares only a few stucture and constant definitions with the
gelic Ethernet device driver, so is implemented as a stand-alone driver
with no dependencies on the gelic Ethernet device driver.

Signed-off-by: Hector Martin <hector@marcansoft.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:20:05 +10:00
Thadeu Lima de Souza Cascardo
8feaa43494 powerpc/eeh: Fix /proc/ppc64/eeh creation
Since commit 188917e183, /proc/ppc64 is a
symlink to /proc/powerpc/. That means that creating /proc/ppc64/eeh will
end up with a unaccessible file, that is not listed under /proc/powerpc/
and, then, not listed under /proc/ppc64/.

Creating /proc/powerpc/eeh fixes that problem and maintain the
compatibility intended with the ppc64 symlink.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@kernel.org>	[3.x]
2011-09-20 09:20:03 +10:00
Arnaud Lacombe
cf01a404d9 powerpc/xics: Add __init to marker icp_native_init()
This should fix the following warning:

 LD      arch/powerpc/sysdev/xics/built-in.o
WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in
reference from the function .icp_native_init() to the function
.init.text:.icp_native_init_one_node()
The function .icp_native_init() references
the function __init .icp_native_init_one_node().
This is often because .icp_native_init lacks a __init
annotation or the annotation of .icp_native_init_one_node is wrong.

icp_native_init() is only referenced in `arch/powerpc/sysdev/xics/xics-common.c'
by xics_init() which is itself marked with __init.

= not built-tested =

Reported-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:20:02 +10:00
Anton Blanchard
9c740025c5 powerpc/pseries: Avoid spurious error during hotplug CPU add
During hotplug CPU add we get the following error:

Unexpected Error (0) returned from configure-connector

ibm,configure-connector returns 0 for configuration complete, so
catch this and avoid the error.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <stable@kernel.org>
2011-09-20 09:20:00 +10:00
Tang Yuantian
0330581ab3 powerpc/mm: Fix the call trace when resumed from hibernation
In SMP mode, the kernel would produce call trace when resumed
	from hibernation. The reason is when the function destroy_context
	is called to drop the resuming mm context, the mm->context.active
	is 1 which is wrong and should be zero.
	We pass the current->active_mm as previous mm context to function
	switch_mmu_context to decrease the context.active by 1.

	In UP mode, there is no effect.

Signed-off-by: Tang Yuantian <b29983@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:58 +10:00
Tony Breeds
9c57a32b2f powerpc/4xx/pci: Add __init annotations for *init_port_hw() functions.
The various port_init_hw methods of ppc4xx_pciex_hwops should have been
marked __init and when I added ppc4xx_pciex_port_reset_sdr(), which is
__init.  This added many section mismatch warnings like:

WARNING: arch/powerpc/sysdev/built-in.o(.text+0x5c68): Section mismatch in reference from the function ppc440spe_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_port_reset_sdr()
The function ppc440spe_pciex_init_port_hw() references
the function __init ppc4xx_pciex_port_reset_sdr().
This is often because ppc440spe_pciex_init_port_hw lacks a __init
annotation or the annotation of ppc4xx_pciex_port_reset_sdr is wrong.

Trivial patch to silence those warnings.

Reported-By: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>

Yours Tony
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:56 +10:00
Michael Ellerman
f9a71e0fd1 powerpc/wsp: Add MSI support for PCI on PowerEN
Based on a patch by Michael Ellerman <michael@ellerman.id.au>

Patch was simply forward ported upstream.

Jimi Xenidis <jimix@pobox.com>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:55 +10:00
Benjamin Herrenschmidt
f352c72512 powerpc/wsp: Add PCIe Root support to PowerEN/WSP
Based on a patch by Benjamin Herrenschmidt <benh@kernel.crashing.org>

Modernized and slightly modified to not record erros into the nvram
log since we do not have that device driver just yet.

Jimi Xenidis <jimix@pobox.com>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:53 +10:00
Jimi Xenidis
2fa3d9e5c6 powerpc/wsp: Fix Wire Speed Processor platform configs
Some config selections were applied to the platform (reference board)
when they actuall apply to the chip.

Signed-off-by: Jimi Xenidis <jimix@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:51 +10:00
Julia Lawall
7a19081fc2 pseries/iommu: Add missing kfree
At this point, window has not been stored anywhere, so it has to be freed
before leaving the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@exists@
local idexpression x;
statement S,S1;
expression E;
identifier fl;
expression *ptr != NULL;
@@

x = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...kfree(x)...+> }
     when any
     when != true x == NULL
x->fl
...>
(
if (x == NULL) S1
|
if (...) { ... when != x
               when forall
(
 return \(0\|<+...x...+>\|ptr\);
|
* return ...;
)
}
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:49 +10:00
Scott Wood
6dece0eb69 powerpc/32: Pass device tree address as u64 to machine_init
u64 is used rather than phys_addr_t to keep things simple, as
this is called from assembly code.

Update callers to pass a 64-bit address in r3/r4.  Other unused
register assignments that were once parameters to machine_init
are dropped.

For FSL BookE, look up the physical address of the device tree from the
effective address passed in r3 by the loader.  This is required for
situations where memory does not start at zero (due to AMP or IOMMU-less
virtualization), and thus the IMA doesn't start at zero, and thus the
device tree effective address does not equal the physical address.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:47 +10:00
Jim Keniston
6c493685f1 powerpc/nvram: Add compression to fit more oops output into NVRAM
Capture more than twice as much text from the printk buffer, and
compress it to fit it in the lnx,oops-log NVRAM partition.  You
can view the compressed text using the new (as of July 20) --unzip
option of the nvram command in the powerpc-utils package.

[BenH: Added select of ZLIB_DEFLATE]

Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:46 +10:00
Matthew McClintock
7392769365 powerpc: Fix build dependencies for epapr.c which needs libfdt.h
Currently, the build can (very rarely) fail to build because libfdt.h has
not been created or is in the process of being copied.

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:44 +10:00
Timur Tabi
14b9247019 powerpc/mpic: Add support for discontiguous cores
There is one place in the MPIC driver that assumes that the cores are numbered
from 0 to n-1.  However, this is not true if the CPUs are not numbered
sequentially.  This can happen on a eight-core SOC where cores two and three
are removed in the device tree.  So instead of blindly looping, we iterate
over the discovered CPUs and use the SMP ID as the index.

This means that we no longer ask the MPIC how many CPUs there are, so
we also delete mpic->num_cpus.

We also catch if the number of CPUs in the SOC exceeds the number that the
MPIC supports.  This should never happen, of course, but it's good to be
sure.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:42 +10:00
Becky Bruce
41151e77a4 powerpc: Hugetlb for BookE
Enable hugepages on Freescale BookE processors.  This allows the kernel to
use huge TLB entries to map pages, which can greatly reduce the number of
TLB misses and the amount of TLB thrashing experienced by applications with
large memory footprints.  Care should be taken when using this on FSL
processors, as the number of large TLB entries supported by the core is low
(16-64) on current processors.

The supported set of hugepage sizes include 4m, 16m, 64m, 256m, and 1g.
Page sizes larger than the max zone size are called "gigantic" pages and
must be allocated on the command line (and cannot be deallocated).

This is currently only fully implemented for Freescale 32-bit BookE
processors, but there is some infrastructure in the code for
64-bit BooKE.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:40 +10:00
Arnd Bergmann
7df5659eef serial/8250: Move UPIO_TSI to powerpc
This iotype is only used by the legacy_serial code in powerpc, so the
code should live there, rather than be compiled in for every 8250
driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-serial@vger.kernel.org
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:39 +10:00
Milton Miller
2eccacd097 powerpc: Tidy up dma_map_ops after adding new hook
The new get_required_mask hook name is longer than many of but not all
of the prior ops.  Tidy the struct initializers to align the equal signs
using the local whitespace.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:37 +10:00
Milton Miller
d24f9c6999 powerpc: Use the newly added get_required_mask dma_map_ops hook
Now that the generic code has dma_map_ops set, instead of having a
messy ifdef & if block in the base dma_get_required_mask hook push
the computation into the dma ops.

If the ops fails to set the get_required_mask hook default to the
width of dma_addr_t.

This also corrects ibmbus ibmebus_dma_supported to require a 64
bit mask.  I doubt anything is checking or setting the dma mask on
that bus.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 09:19:35 +10:00
Milton Miller
6a5c7be5e4 powerpc: Override dma_get_required_mask by platform hook and ops
The hook dma_get_required_mask is supposed to return the mask required
by the platform to operate efficently.  The generic version of
dma_get_required_mask in driver/base/platform.c returns a mask based
only on max_pfn.  However, this is likely too big for iommu systems
and could be too small for platforms that require a dma offset or have
a secondary window at a high offset.

Override the default, provide a hook in ppc_md used by pseries lpar and
cell, and provide the default answer based on memblock_end_of_DRAM(),
with hooks for get_dma_offset, and provide an implementation for iommu
that looks at the defined table size.  Coverting from the end address
to the required bit mask is based on the generic implementation.

The need for this was discovered when the qla2xxx driver switched to
64 bit dma then reverted to 32 bit when dma_get_required_mask said
32 bits was sufficient.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-01 16:00:19 +10:00
Benjamin Herrenschmidt
7bfb40b048 Merge remote-tracking branch 'origin/master' into next
(Pickup Stephen's fix d4d7b2a11c)
2011-09-01 15:57:32 +10:00
Linus Torvalds
e9208a4eec Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/p1023rds: Fix the error of bank-width of nor flash
  powerpc/85xx: enable caam crypto driver by default
  powerpc/85xx: enable the audio drivers in the defconfigs
2011-08-31 08:58:36 -07:00
Chunhe Lan
0c81e4b426 powerpc/p1023rds: Fix the error of bank-width of nor flash
In the p1023rds, a physical bus of nor flash is 16 bits width.
The bank-width is width (in bytes) of the bus width. So, the
value of bank-width of nor flash is not one, and it should be
two.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30 21:27:33 -05:00
Kim Phillips
e09e2fb513 powerpc/85xx: enable caam crypto driver by default
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver,
caam, and the algorithms it supports, and disable the
SEC2/3 driver, talitos.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30 21:27:30 -05:00
Timur Tabi
39c428f753 powerpc/85xx: enable the audio drivers in the defconfigs
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio
is enabled on the Freescale P1022DS reference board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30 21:27:29 -05:00
Benjamin Herrenschmidt
9bb7361d99 Merge remote-tracking branch 'jwb/next' into next 2011-08-30 15:14:46 +10:00
Stephen Rothwell
d4d7b2a11c remove remaining references to nfsservctl
These were missed in commit f5b9409973 "All Arch: remove linkage
for sys_nfsservctl system call" due to them having no sys_ prefix
(presumably).

Cc: NeilBrown <neilb@suse.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-29 16:31:59 -07:00
Liu Gang-B34182
671ee7f0ce arch/powerpc/sysdev/fsl_rio.c: correct IECSR register clear value
This bug causes the IECSR register clear failure.  In this case, the RETE
(retry error threshold exceeded) interrupt will be generated and cannot be
cleared.  So the related ISR may be called persistently.

The RETE bit in IECSR is cleared by writing a 1 to it.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25 18:51:06 -07:00
Josh Boyer
9fcd768d0c powerpc/40x: Remove obsolete HCU4 board
The HCU4 board is unmaintained.  Remove it.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11 13:56:43 -04:00
Ayman El-Khashab
e7fa1d1314 powerpc/4xx: enable and fix pcie gen1/gen2 on the 460sx
Adds a register to the config space for the 460sx.  Changes the vc0
detect to a pll detect.  maps configuration space to test the link
status.  changes the setup to enable gen2 devices to operate at gen2
speeds.  fixes mapping that was not correct for the 460sx.  added
bit definitions for the OMRxMSKL registers.  Removed reserved bit
that was set incorrectly in the OMR2MSKL register.

tested on the 460sx eiger and custom board

Signed-off-by: Ayman El-Khashab <ayman@elkhashab.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11 13:51:18 -04:00
Stefan Roese
2f6bab96ef powerpc/44x: Add NOR flash device to Yosemite dts
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11 13:50:42 -04:00
Suzuki Poulose
674bfa4855 powerpc/44x: Kexec support for PPC440X chipsets
This patch adds kexec support for PPC440 based chipsets.  This work is based
on the KEXEC patches for FSL BookE.

The FSL BookE patch and the code flow could be found at the link below:

	http://patchwork.ozlabs.org/patch/49359/

Steps:

1) Invalidate all the TLB entries except the one this code is run from
2) Create a tmp mapping for our code in the other address space and jump to it
3) Invalidate the entry we used
4) Create a 1:1 mapping for 0-2GiB in blocks of 256M
5) Jump to the new 1:1 mapping and invalidate the tmp mapping

I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU.

You need kexec-tools commit e8b7939b1e or newer for ppc440x support, 
available at:

 git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git

Signed-off-by: 	Suzuki Poulose <suzuki@in.ibm.com>
Cc:	Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11 13:50:37 -04:00