This patch fixes the checkpatch issue:
CHECK: Logical continuations should be on the previous line
Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the issue:
CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt
Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch issue:
CHECK: spaces preferred around that '/'
Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace bit shifting on 1 with the BIT(x) Macro
The semantic patch used to find this is:
@@ int g; @@
-(1 << g)
+BIT(g)
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed warnings reported by checkpatch.pl:
- Block comments use a trailing */ on a separate line
- Block comments use * on subsequent lines
Signed-off-by: Nayeemahmed Badebade <itachi.opsrc@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big, really big, staging tree patches for 4.2-rc1.
Loads of stuff in here, almost all just coding style fixes / churn, and
a few new drivers as well, one of which I just disabled from the build a
few minutes ago due to way too many build warnings.
Other than the one "disable this driver" patch, all of these have been
in linux-next for quite a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNpc0ACgkQMUfUDdst+ym8EgCg0pL1Qcf9Se3jAc96fLt+itpv
Rd0AoI9uJcq8Qm7d+IXnz3ojLnN9xvN3
=xt0u
-----END PGP SIGNATURE-----
Merge tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big, really big, staging tree patches for 4.2-rc1.
Loads of stuff in here, almost all just coding style fixes / churn,
and a few new drivers as well, one of which I just disabled from the
build a few minutes ago due to way too many build warnings.
Other than the one "disable this driver" patch, all of these have been
in linux-next for quite a while with no reported issues"
* tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits)
staging: wilc1000: disable driver due to build warnings
Staging: rts5208: fix CHANGE_LINK_STATE value
Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis
Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines
Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators
Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs
Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters
Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs
Staging: sm750fb: modedb.h: Shorten lines to under 80 characters
Staging: sm750fb: modedb.h: Replace spaces with tabs
staging: comedi: addi_apci_3120: rename 'this_board' variables
staging: comedi: addi_apci_1516: rename 'this_board' variables
staging: comedi: ni_atmio: cleanup ni_getboardtype()
staging: comedi: vmk80xx: sanity check context used to get the boardinfo
staging: comedi: vmk80xx: rename 'boardinfo' variables
staging: comedi: dt3000: rename 'this_board' variables
staging: comedi: adv_pci_dio: rename 'this_board' variables
staging: comedi: cb_pcidas64: rename 'thisboard' variables
staging: comedi: cb_pcidas: rename 'thisboard' variables
staging: comedi: me4000: rename 'thisboard' variables
...
Converted to use the new device-model parallel port.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
API consolidation with coccinelle found:
./drivers/staging/panel/panel.c:782:2-18:
consolidation with schedule_timeout_*() recommended
This is a 1:1 conversion with respect to schedule_timeout() to the
schedule_timeout_interruptible() helper only - so only an API
consolidation to improve readability. The timeout was being passed
as (ms * HZ + 999) / 1000 but that simply looks wrong - rather than
"manual" converting to jiffies, msecs_to_jiffies which handles all
corner-cases correctly, was used.
Patch was compile tested with x86_64_defconfig + CONFIG_STAGING=y,
CONFIG_PARPORT=m, CONFIG_PANEL=m
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if we load the module, unload and then again try to load the module, we
will get a stackdump. In the module_exit function we are unregistering
the device and releasing the parport. So when we reach the detach
function parport is already null and the unregister_reboot_notifier()
is never called. When we again try to load the module it again tries
register_reboot_notifier() and gives us a stackdump as its earlier
registration is still not removed. It was caused by the
commit bb046fef96 ('staging: panel: register reboot')
Fix this by moving all the unregistering and releasing in the detach
function, which should be the ideal case as the detach will be called if
we try to unregister the driver or if the parport is removed.
Fixes: bb046fef96 ('staging: panel: register reboot')
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
both the misc_deregister(), parport_release() and
parport_unregister_device() is there in the module_exit function also.
detach is called from parport_unregister_driver() and by the time
detach executes misc_deregister(), parport_release() and
parport_unregister_device() has already executed marking
keypad_initialized and lcd.initialized as false. so this part of the
code will never execute.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the lcd type as defined in the Kconfig is not matching in the code.
as a result the rs, rw and en pins were getting interchanged.
Kconfig defines the value of PANEL_LCD to be 1 if we select custom
configuration but in the code LCD_TYPE_CUSTOM is defined as 5.
my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it
as pins of LCD_TYPE_OLD, and it was not working.
Now values are corrected with referenece to the values defined in
Kconfig and it is working.
checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration.
Cc: <stable@vger.kernel.org> # 2.6.32+
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
no need to monitor init_in_progress now as keypad_send_key() can only
be called after the timer is initialized. and timer is initialized
from keypad_init() which is in the attach section and can only execute
after the module has initialized.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we were returning success even if the module failed to register.
now we are returning the actual return value, success or error.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we donot need the reboot notifier in module init section, as the
notifier is used after lcd is initialized. so lets register for the
reboot notifier only after we have successfully attached to the
parallel port. and similarly unregister at detach.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
register the driver only if lcd or keypad has been enabled and if
both are disabled then just exit.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces init_timer and the 2 step initialization of function
and data by setup_timer to make the code more concise.
The issue was discovered using the following coccinelle script:
@@
expression ds, e1, e2;
@@
-init_timer (&ds);
+setup_timer (&ds, e1, e2);
...
(
-ds.function = e1;
...
-ds.data = e2;
|
-ds.data = e2;
...
-ds.function = e1;
)
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments,
keeping track of who changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of magic numbers in LCD commands and replace them with defined
values, so that it's more obvious that the commands are doing.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove lcd.left_shift because it is only written to at some places but
never read from.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move more or less all LCD-related state into struct lcd
in order to get better cohesion; use bool instead of int
where it makes sense.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a defined value instead of magic number comparison
for checking whether a module param value has been set.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework lcd_init method to make it a little bit more clear about
the precedence of the params, move LCD geometry and pins layout
to the LCD struct and thus make the LCD-related module params
effectively read-only.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make keypad_type and lcd_type module params read-only.
This step also starts making it more clear what is
the precedence of device params coming from different
sources (device profile, runtime module param values etc).
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Start decoupling module params from the actual device state,
both for lcd and keypad, by keeping the params read-only
and moving the device state to related structs.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid magic number and use a comparison with a defined value instead
that checks whether module param has been set by the user to some
value at loading time.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get rid of magic numbers indicating that the value of a module param
is not set. Use a defined value instead.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove useless function and let the kernel call the actual
init function directly.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set default parport module param value to DEFAULT_PARPORT so that
a if-block can be avoided.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Give DEFAULT_KEYPAD and DEFAULT_LCD defines better names,
so that their meaning is emphasized.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the order of the module parameter declarations
so that it matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the order of the DEFAULT_* values redefines so that it
matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the order of the initial DEFAULT_* defines so that it
matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the implementation of a single-open policy for both
devices (lcd and keypad) by using atomic_t instead of plain ints.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed one instance of the following checkpatch.pl warning in
panel.c:
WARNING: else is not generally useful after a break or return
Signed-off-by: Vincent Heuken <me@vincentheuken.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Style-only modifications to comply with checkpatch.pl --strict --file.
. Breaks down compound assignments.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Style-only modifications to comply with checkpatch.pl --strict --file.
. Correctly realigns the lines that needed to be ;
. Suppress useless blank rows ;
. Fix sizeof() issues in various -malloc() functions.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Style-only modifications to comply with checkpatch.pl --strict --file.
. Adds every missing brace in condition statements.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a regression in lcd_write caused by commit
70a8c3eb85
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "Missing a blank line after declarations" checkpatch warnings in panel.c.
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes two sparse warnings related to keypad_read :
warning: incorrect type in argument 1 (different address spaces)
warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes two sparse warnings related to lcd_write :
warning: incorrect type in argument 1 (different address spaces)
warning: incorrect type in initializer (incompatible argument 2
(different address spaces))
lcd_write can be used from kernel space (in panel_lcd_print) or from user
space. So we introduce the lcd_write_char function that will write a char to
the device. We modify lcd_write and panel_lcd_print to use it. Finally we add
__user annotation missing in lcd_write.
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.
This change was suggested by Thomas Gleixner.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@
module_exit(ex);
@@
identifier r.ex;
@@
ex(...) {
<...
- del_timer
+ del_timer_sync
(...)
...>
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning in panel.c:
WARNING: quoted string split across lines
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
