Saeed Mahameed says:
====================
mlx5-next 2022-22-02
The following PR includes updates to mlx5-next branch:
Headlines:
==========
1) Jakub cleans up unused static inline functions
2) I did some low level firmware command interface return status changes to
provide the caller with full visibility on the error/status returned by
the Firmware.
3) Use the new command interface in RDMA DEVX usecases to avoid flooding
dmesg with some "expected" user error prone use cases.
4) Moshe also uses the new command interface to grab the specific error
code from MFRL register command to provide the exact error reason for
why SW reset couldn't perform internally in FW.
5) From Mark Bloch: Lag, drop packets in hardware when possible
In active-backup mode the inactive interface's packets are dropped by the
bond device. In switchdev where TC rules are offloaded to the FDB
this can lead to packets being hit in the FDB where without offload
they would have been dropped before reaching TC rules in the kernel.
Create a drop rule to make sure packets on inactive ports are dropped
before reaching the FDB.
Listen on NETDEV_CHANGEUPPER / NETDEV_CHANGEINFODATA events and record
the inactive state and offload accordingly.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add clarification on sync reset failure
net/mlx5: Add reset_state field to MFRL register
RDMA/mlx5: Use new command interface API
net/mlx5: cmdif, Refactor error handling and reporting of async commands
net/mlx5: Use mlx5_cmd_do() in core create_{cq,dct}
net/mlx5: cmdif, Add new api for command execution
net/mlx5: cmdif, cmd_check refactoring
net/mlx5: cmdif, Return value improvements
net/mlx5: Lag, offload active-backup drops to hardware
net/mlx5: Lag, record inactive state of bond device
net/mlx5: Lag, don't use magic numbers for ports
net/mlx5: Lag, use local variable already defined to access E-Switch
net/mlx5: E-switch, add drop rule support to ingress ACL
net/mlx5: E-switch, remove special uplink ingress ACL handling
net/mlx5: E-Switch, reserve and use same uplink metadata across ports
net/mlx5: Add ability to insert to specific flow group
mlx5: remove unused static inlines
====================
Link: https://lore.kernel.org/r/20220223233930.319301-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DEVX can now use mlx5_cmd_do() which will not intercept the command
execution status and will provide full information of the return code.
DEVX can now propagate the error code safely to upper layers, to
indicate to the callers if the command was actually executed and the
error code indicates the command execution status availability in
the command outbox buffer.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Same as the new mlx5_cmd_do API, report all information to callers and
let them handle the error values and outbox parsing.
The user callback status "work->user_callback(status)" is now similar to
the error rc code returned from the blocking mlx5_cmd_do() version,
and now is defined as follows:
-EREMOTEIO : Command executed by FW, outbox.status != MLX5_CMD_STAT_OK.
Caller must check FW outbox status.
0 : Command execution successful, outbox.status == MLX5_CMD_STAT_OK.
< 0 : Command couldn't execute, FW or driver induced error.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5_core_create_{cq/dct} functions are non-trivial mlx5 commands
functions. They check command execution status themselves and hide
valuable FW failure information.
For mlx5_core/eth kernel user this is what we actually want, but for a
devx/rdma user the hidden information is essential and should be propagated
up to the caller, thus we convert these commands to use mlx5_cmd_do
to return the FW/driver and command outbox status as is, and let the caller
decide what to do with it.
For kernel callers of mlx5_core_create_{cq/dct} or those who only care about
the binary status (FAIL/SUCCESS) they must check status themselves via
mlx5_cmd_check() to restore the current behavior.
err = mlx5_create_cq(in, out)
err = mlx5_cmd_check(err, in, out)
if (err)
// handle err
For DEVX users and those who care about full visibility, They will just
propagate the error to user space, and app can check if err == -EREMOTEIO,
then outbox.{status,syndrome} are valid.
API Note:
mlx5_cmd_check() must be used by kernel users since it allows the driver
to intercept the command execution status and return a driver simulated
status in case of driver induced error handling or reset/recovery flows.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE
event handler will cause skip the assignment logic, but
ib_dispatch_event() will be called anyway.
Fix it by calling to return instead of break after memory allocation
failure.
Fixes: 00f5ce99dc ("mlx4: Use port management change event instead of smp_snoop")
Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The tstats allocation is done in the accelerated ndo_init function but the
allocation is not tested to succeed.
The deallocation is not done in the accelerated ndo_uninit function.
Resolve issues by testing for an allocation failure and adding the
free_percpu in the uninit function.
Fixes: aa0616a9bd ("IB/hfi1: switch to core handling of rx/tx byte/packet counters")
Link: https://lore.kernel.org/r/1642287756-182313-5-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The following allocation with large txqueuelen will result in the
following warning:
Call Trace:
__alloc_pages_nodemask+0x283/0x2c0
kmalloc_large_node+0x3c/0xa0
__kmalloc_node+0x22a/0x2f0
hfi1_ipoib_txreq_init+0x19f/0x330 [hfi1]
hfi1_ipoib_setup_rn+0xd3/0x1a0 [hfi1]
rdma_init_netdev+0x5a/0x80 [ib_core]
ipoib_intf_init+0x6c/0x350 [ib_ipoib]
ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib]
ipoib_add_one+0xbe/0x300 [ib_ipoib]
add_client_context+0x12c/0x1a0 [ib_core]
ib_register_client+0x147/0x190 [ib_core]
ipoib_init_module+0xdd/0x132 [ib_ipoib]
do_one_initcall+0x46/0x1c3
do_init_module+0x5a/0x220
load_module+0x14c5/0x17f0
__do_sys_init_module+0x13b/0x180
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
For ipoib, the txqueuelen is modified with the module parameter
send_queue_size.
Fix by changing to use kv versions of the same allocator to handle the
large allocations. The allocation embeds a hdr struct that is dma mapped.
Change that struct to a pointer to a kzalloced struct.
Cc: stable@vger.kernel.org
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/1642287756-182313-3-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
We'd better use the helper get_task_comm() rather than the open-coded
strlcpy() to get task comm. As the comment above the hard-coded 16, we
can replace it with TASK_COMM_LEN.
Link: https://lkml.kernel.org/r/20211120112738.45980-4-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Substantially all bug fixes and cleanups:
- Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
memset_startat, and others
- General code cleanups from bots
- Simplify some of the rxe pool code in preparation for a larger rework
- Clean out old stuff from hns, including all support for hip06 devices
- Fix a bug where GID table entries could be missed if the table had holes
in it
- Rename paths and sessions in rtrs for better understandability
- Consolidate the roce source port selection code
- NDR speed support in mlx5
-----BEGIN PGP SIGNATURE-----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=EL3r
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Another small cycle. Mostly cleanups and bug fixes, quite a bit
assisted from bots. There are a few new syzkaller splats that haven't
been solved yet but they should get into the rcs in a few weeks, I
think.
Summary:
- Update drivers to use common helpers for GUIDs, pkeys, bitmaps,
memset_startat, and others
- General code cleanups from bots
- Simplify some of the rxe pool code in preparation for a larger
rework
- Clean out old stuff from hns, including all support for hip06
devices
- Fix a bug where GID table entries could be missed if the table had
holes in it
- Rename paths and sessions in rtrs for better understandability
- Consolidate the roce source port selection code
- NDR speed support in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (83 commits)
RDMA/irdma: Remove the redundant return
RDMA/rxe: Use the standard method to produce udp source port
RDMA/irdma: Make the source udp port vary
RDMA/hns: Replace get_udp_sport with rdma_get_udp_sport
RDMA/core: Calculate UDP source port based on flow label or lqpn/rqpn
IB/qib: Fix typos
RDMA/rtrs-clt: Rename rtrs_clt to rtrs_clt_sess
RDMA/rtrs-srv: Rename rtrs_srv to rtrs_srv_sess
RDMA/rtrs-clt: Rename rtrs_clt_sess to rtrs_clt_path
RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path
RDMA/rtrs: Rename rtrs_sess to rtrs_path
RDMA/hns: Modify the hop num of HIP09 EQ to 1
IB/iser: Align coding style across driver
IB/iser: Remove un-needed casting to/from void pointer
IB/iser: Don't suppress send completions
IB/iser: Rename ib_ret local variable
IB/iser: Fix RNR errors
IB/iser: Remove deprecated pi_guard module param
IB/mlx5: Expose NDR speed through MAD
RDMA/cxgb4: Set queue pair state when being queried
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmHbZ+YeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDs4H/RgC8JOV3Dki1VtO
6OwPxUKKojhVU9LJis7kyG5voB/zE7tK5nI+jC3gYGQUFKWaZ3YY8s3UcV1zvg/b
a44b91boA+dKxEwOq4RZNQ9mU+QWnNoG5+UqBkmB8vewi3QC3T8xEmpWcERLbU7d
KrI2T6i4ksJ9OYSYMEMyrvrpt7nt3n1tDX8b71faXjf1zbLeGo9zT53t6BJ/LknV
AK406Eq/3bg36OZrKFuG7hCJfRE/cSlxF9bxK3sIfMBMQ2YPe1S5+pxl5iBD0nyl
NaHOBYcLTxPAne3YgIvK0zDdsS+EtPSlaVdWfSmNjQhX2vqEixldgdrOCmwp37vd
3gV9D28=
=hrOo
-----END PGP SIGNATURE-----
Merge tag 'v5.16' into rdma.git for-next
To resolve minor conflict in:
drivers/infiniband/hw/mlx5/mlx5_ib.h
By merging both hunks.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Core:
- Provide a new interface for affinity hints to provide a separation
between hint and actual affinity change which has become a hidden
property of the current interface
- Fix up the in tree usage of the affinity hint interfaces
Drivers:
- No new irqchip drivers!
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----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=myJA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Provide a new interface for affinity hints to provide a separation
between hint and actual affinity change which has become a hidden
property of the current interface
- Fix up the in tree usage of the affinity hint interfaces
Drivers:
- No new irqchip drivers!
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes"
* tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt
irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
irqchip/ingenic-tcu: Use correctly sized arguments for bit field
irqchip/gic-v2m: Add const to of_device_id
irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init
irqchip/spear-shirq: Add support for IRQ 0..6
irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime
irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve
irqchip/gic-v3-its: Give the percpu rdist struct its own flags field
net/mlx4: Use irq_update_affinity_hint()
net/mlx5: Use irq_set_affinity_and_hint()
hinic: Use irq_set_affinity_and_hint()
scsi: lpfc: Use irq_set_affinity()
mailbox: Use irq_update_affinity_hint()
ixgbe: Use irq_update_affinity_hint()
be2net: Use irq_update_affinity_hint()
enic: Use irq_update_affinity_hint()
RDMA/irdma: Use irq_update_affinity_hint()
scsi: mpt3sas: Use irq_set_affinity_and_hint()
...
Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant
subsystems all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
VRZJypgNfU/Pt0ykstZD
=CO9J
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
The type of the function i40iw_remove is void. So remove
the unnecessary return.
Link: https://lore.kernel.org/r/20220110073733.3221379-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Get the source udp port number for a QP based on the grh.flow_label or
lqpn/rqrpn. This provides a better spread of traffic across NIC RX queues.
Link: https://lore.kernel.org/r/20220106180359.2915060-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Several drivers have the same function xxx_get_udp_sport. So this
function is moved to ib_verbs.h.
Link: https://lore.kernel.org/r/20220106180359.2915060-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently IRQs are requested one by one. To balance spreading IRQs
among cpus using such scheme requires remembering cpu mask for the
cpus used for a given device. This complicates the IRQ allocation
scheme in subsequent patch.
Hence, prepare the code for bulk IRQs allocation. This enables
spreading IRQs among cpus in subsequent patch.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.
Link: https://lore.kernel.org/r/a2ab630d2a634547db9b581faa9d65da2edb9d05.1639554831.git.leonro@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.
Fixes: 67bbc05512 ("RDMA/cxgb4: Add query_qp support")
Link: https://lore.kernel.org/r/20211220152530.60399-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP06 is no longer supported. In order to reduce unnecessary maintenance,
the code of HIP06 is removed.
Link: https://lore.kernel.org/r/20211220130558.61585-1-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are currently 2 ways to create a set of sysfs files for a kobj_type,
through the default_attrs field, and the default_groups field. Move the
IB code to use default_groups field which has been the preferred way since
commit aa30f47cf6 ("kobject: Add support for default attribute groups to
kobj_type") so that we can soon get rid of the obsolete default_attrs
field.
Link: https://lore.kernel.org/r/20220103152259.531034-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch is not the full fix and still causes to call traces
during mlx5_ib_dereg_mr().
This reverts commit f0ae4afe3d.
Fixes: f0ae4afe3d ("RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow")
Link: https://lore.kernel.org/r/20211222101312.1358616-1-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20211221235852.323752-2-david.e.box@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Saeed Mahameed says:
====================
mlx5-next branch 2021-12-15
Hi Dave, Jakub, Jason
This pulls mlx5-next branch into net-next and rdma branches.
All patches already reviewed on both rdma and netdev mailing lists.
Please pull and let me know if there's any problem.
1) Add multiple FDB steering priorities [1]
2) Introduce HW bits needed to configure MAC list size of VF/SF.
Required for ("net/mlx5: Memory optimizations") upcoming series [2].
[1] https://lore.kernel.org/netdev/20211201193621.9129-1-saeed@kernel.org/
[2] https://lore.kernel.org/lkml/20211208141722.13646-1-shayd@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
Currently, the driver ignores the user's priority for flow steering rules
in FDB namespace. Change it and create the rule in the right priority.
It will allow to create FDB steering rules in up to 16 different
priorities.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* mellanox/mlx5-next:
RDMA/mlx5: Add support to multiple priorities for FDB rules
net/mlx5: Create more priorities for FDB bypass namespace
net/mlx5: Refactor mlx5_get_flow_namespace
net/mlx5: Separate FDB namespace
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing beyond
the destination member that is intended to be the starting point of
zeroing through the end of the struct.
Link: https://lore.kernel.org/r/20211213223331.135412-15-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing beyond
the destination member that is intended to be the starting point of
zeroing through the end of the struct. Additionally, since everything
appears to perform a roundup (including allocation), just change the size
of the struct itself and add a build-time check to validate the expected
size.
Link: https://lore.kernel.org/r/20211213223331.135412-13-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_after() to zero the end of struct mlx5_ib_mr that should be
initialized.
Link: https://lore.kernel.org/r/20211213223331.135412-10-keescook@chromium.org
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG2fU0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC7EH/3R7Rt+OD8Wn8Ss3
w8V+dBxVwa2u2oMTyUHPxaeOXZ7bi38XlUdLFPOK/76bGwO0a5TmYZqsWdRbGyT0
HfcYjHsQ0lbJXk/nh2oM47oJxJXVpThIHXJEk0FZ0Y5t+DYjIYlNHzqZymUyhLem
St74zgWcyT+MXuqY34vB827FJDUnOxhhhi85tObeunaSPAomy9aiYidSC1ARREnz
iz2VUntP/QnRnKVvL2nUZNzcz1xL5vfCRSKsRGRSv3qW1Y/1M71ylt6JVmSftWq+
VmMdFxFhdrb1OK/1ct/930Un/UP2NG9EJsWxote2XYlnVSZHzDqH7lUhbqgdCcLz
1m2tVNY=
=7wRd
-----END PGP SIGNATURE-----
Merge tag 'v5.16-rc5' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Variables allocated by kvmalloc_array() should not be freed by kfree.
Because they may be allocated by vmalloc. So we replace kfree() with
kvfree() here.
Fixes: 6fd610c573 ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Link: https://lore.kernel.org/r/20211210094234.5829-1-billsjc@sjtu.edu.cn
Signed-off-by: Jiacheng Shi <billsjc@sjtu.edu.cn>
Acked-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The wrong goto label was used for the error case and missed cleanup of the
pkt allocation.
Fixes: d39bf40e55 ("IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields")
Link: https://lore.kernel.org/r/20211208175238.29983-1-jose.exposito89@gmail.com
Addresses-Coverity-ID: 1493352 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current write wqe mechanism is to write to DDR first, and then notify
the hardware through doorbell to read the data. Direct wqe is a mechanism
to fill wqe directly into the hardware. In the case of light load, the wqe
will be filled into pcie bar space of the hardware, this will reduce one
memory access operation and therefore reduce the latency. SIMD
instructions allows cpu to write the 512 bits at one time to device
memory, thus it can be used for posting direct wqe.
Add direct wqe enable switch and address mapping.
Link: https://lore.kernel.org/r/20211207124901.42123-2-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Due to the discrete nature of the HIP08 timer unit, a requester might
finish the timeout period sooner, in elapsed real time, than its responder
does, even when both sides share the identical RNR timeout length included
in the RNR Nak packet and the responder indeed starts the timing prior to
the requester. Furthermore, if a 'providential' resend packet arrived
before the responder's timeout period expired, the responder is certainly
entitled to drop the packet silently in the light of IB protocol.
To address this problem, our team made good use of certain hardware facts:
1) The timing resolution regards the transmission arrangements is 1
microsecond, e.g. if cq_period field is set to 3, it would be
interpreted as 3 microsecond by hardware
2) A QPC field shall inform the hardware how many timing unit (ticks)
constitutes a full microsecond, which, by default, is 1000
3) It takes 14ns for the processor to handle a packet in the buffer, so
the RNR timeout length of 10ns would ensure our processing mechanism is
disabled during the entire timeout period and the packet won't be
dropped silently
To achieve (3), we permanently set the QPC field mentioned in (2) to zero
which nominally indicates every time tick is equivalent to a microsecond
in wall-clock time; now, a RNR timeout period at face value of 10 would
only last 10 ticks, which is 10ns in wall-clock time.
It's worth noting that we adapt the driver by magnifying certain
configuration parameters(cq_period, eq_period and ack_timeout)by 1000
given the user assumes the configuring timing unit to be microseconds.
Also, this particular improvisation is only deployed on HIP08 since other
hardware has already solved this issue.
Fixes: cfc85f3e4b ("RDMA/hns: Add profile support for hip08 driver")
Link: https://lore.kernel.org/r/20211209140655.49493-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the driver ignores the user's priority for flow steering
rules in FDB namespace. Change it and create the rule in the right
priority.
It will allow to create FDB steering rules in up to 16 different
priorities.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
