The interrupt callback should not be triggered before DRIVER_OK
is set. Otherwise, it might break the virtio device driver.
So let's add a check to avoid the unexpected behavior.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210923075722.98-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid executing set_vq_ready() if the device has been reset. In such
case, the features are cleared and cannot be used in conditional
statements. Such reference happens is the function ctrl_vq_idx().
Fixes: 52893733f2 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909063738.46970-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When clearing VQs ready indication for the data VQs, do the same for the
control VQ.
Fixes: 5262912ef3 ("vdpa/mlx5: Add support for control VQ and MAC setting")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909063652.46880-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We should cleanup the old kernel states e.g. interrupt callback
no matter whether the userspace handle the reset correctly or not
since virtio-vdpa can't handle the reset failure now.
Otherwise, the old state might be used after reset which might
break something, e.g. the old interrupt callback might be triggered
by userspace after reset, which can break the virtio device driver.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210906142158.181-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This should return -ENOMEM if alloc_workqueue() fails. Currently it
returns success.
Fixes: b66219796563 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210907073223.GA18254@kili
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
VDUSE (vDPA Device in Userspace) is a framework to support
implementing software-emulated vDPA devices in userspace. This
document is intended to clarify the VDUSE design and usage.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-14-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This VDUSE driver enables implementing software-emulated vDPA
devices in userspace. The vDPA device is created by
ioctl(VDUSE_CREATE_DEV) on /dev/vduse/control. Then a char device
interface (/dev/vduse/$NAME) is exported to userspace for device
emulation.
In order to make the device emulation more secure, the device's
control path is handled in kernel. A message mechnism is introduced
to forward some dataplane related control messages to userspace.
And in the data path, the DMA buffer will be mapped into userspace
address space through different ways depending on the vDPA bus to
which the vDPA device is attached. In virtio-vdpa case, the MMU-based
software IOTLB is used to achieve that. And in vhost-vdpa case, the
DMA buffer is reside in a userspace memory region which can be shared
to the VDUSE userspace processs via transferring the shmfd.
For more details on VDUSE design and usage, please see the follow-on
Documentation commit.
NB(mst): when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
replace eventfd_signal_count with eventfd_signal_allowed,
and drop the previous
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-13-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements an MMU-based software IOTLB to support mapping
kernel dma buffer into userspace dynamically. The basic idea
behind it is treating MMU (VA->PA) as IOMMU (IOVA->PA). The
software IOTLB will set up MMU mapping instead of IOMMU mapping
for the DMA transfer so that the userspace process is able to
use its virtual address to access the dma buffer in kernel.
To avoid security issue, a bounce-buffering mechanism is
introduced to prevent userspace accessing the original buffer
directly which may contain other kernel data. During the mapping,
unmapping, the software IOTLB will copy the data from the original
buffer to the bounce buffer and back, depending on the direction
of the transfer. And the bounce-buffer addresses will be mapped
into the user address space instead of the original one.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-12-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces an attribute for vDPA device to indicate
whether virtual address can be used. If vDPA device driver set
it, vhost-vdpa bus driver will not pin user page and transfer
userspace virtual address instead of physical address during
DMA mapping. And corresponding vma->vm_file and offset will be
also passed as an opaque pointer.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-11-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add an opaque pointer for DMA mapping.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-9-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds a new callback to support device specific reset
behavior. The vdpa bus driver will call the reset function
instead of setting status to zero during resetting.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210831103634.33-6-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The size passed to alloc_iova() should be the size of page frames.
Now we use byte granularity for the iova domain, so it's safe to
pass the size in bytes to alloc_iova(). But it would be better to use
iova_shift() for the size to avoid future bugs if we change granularity.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210809100923.38-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Multiqueue support requires additional virtio_net_q objects to be added
or removed per the configured number of queue pairs. In addition the RQ
tables needs to be modified to match the number of configured receive
queues so the packets are dispatched to the right virtqueue according to
the hash result.
Note: qemu v6.0.0 is broken when the device requests more than two data
queues; no net device will be created for the vdpa device. To avoid
this, one should specify mq=off to qemu. In this case it will end up
with a single queue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-7-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to handle control virtqueue configurations per virtio
specification. The control virtqueue is implemented in software and no
hardware offloading is involved.
Control VQ configuration need task context, therefore all configurations
are handled in a workqueue created for the purpose.
Modifications are made to the memory registration code to allow for
saving a copy of itolb to be used by the control VQ to access the vring.
The max number of data virtqueus supported by the driver has been
updated to 2 since multiqueue is not supported at this stage and we need
to ensure consistency of VQ indices mapping to either data or control
VQ.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following patches add control virtuqeue and multiqueue support. We want
to verify that the index value to callbacks referencing a virtqueue is
valid.
The logic defining valid indices is as follows:
CVQ clear: 0 and 1.
CVQ set, MQ clear: 0, 1 and 2
CVQ set, MQ set: 0..nvq where nvq is whatever provided to
_vdpa_register_device()
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead, define an array of struct vdpa_callback on struct mlx5_vdpa_net
and use it to store callbacks for any virtqueue provided. This is
required due to the fact that callback configurations arrive before feature
negotiation. With control VQ and multiqueue introduced next we want to
save the information until after feature negotiation where we know the
CVQ index.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use struct mlx5_vdpa_dev as an argument to setup_driver() and a few
others in preparation to control virtqueue support in a subsequent
patch. The control virtqueue is part of struct mlx5_vdpa_dev so this is
required.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit enbales multi-queue and control vq
features for ifcvf
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210818095714.3220-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
To enable this multi-queue feature for ifcvf, this commit
intends to detect and use the onboard number of queues
directly than IFCVF_MAX_QUEUE_PAIRS = 1 (removed)
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210818095714.3220-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This commit implements the management netlink framework for ifcvf,
including register and add / remove a device
It works with iproute2:
[root@localhost lszhu]# vdpa mgmtdev show -jp
{
"mgmtdev": {
"pci/0000:01:00.5": {
"supported_classes": [ "net" ]
},
"pci/0000:01:00.6": {
"supported_classes": [ "net" ]
}
}
}
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.5 name vdpa0
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.6 name vdpa1
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a new function get_dev_type() which returns
the virtio device id of a device, to avoid duplicated code.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
Fixes in virtio,vhost,vdpa drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmEZ7l0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpdoQH/ir3ycgBco4pgDlpo0EQzw1eqwuyT69L7fvE
hlEZOqYOE39WvRTbFZLdrk4RQsULuu4x1vBr9AZ/qV2kHIHUlIGkuNqXnJiihsZE
bHGzKV7XGuzwRFXzCEmzTCDo6SFICVpqN9sb+tKMEsb/qiANi22OuDuDqffHldOH
wYmw6BaHPdj+w1+w6PYW8R/M0A9yaI7HngfBxt9OiVCYXNK2QQDiUWOsAaxmshSt
wsTDSwz4T6rRn/chztWC4JxlpossWJ7zywJexPKW02PSBqOV+z6irPkr7Ku3MhJ7
T2OjLzSSub1R+ikuQikZWKY67mvr45fnWFglUsPtO7H4f6biDeA=
=06n4
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes in virtio, vhost, and vdpa drivers"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix queue type selection logic
vdpa/mlx5: Avoid destroying MR on empty iotlb
tools/virtio: fix build
virtio_ring: pull in spinlock header
vringh: pull in spinlock header
virtio-blk: Add validation for block size in config space
vringh: Use wiov->used to check for read/write desc order
virtio_vdpa: reject invalid vq indices
vdpa: Add documentation for vdpa_alloc_device() macro
vDPA/ifcvf: Fix return value check for vdpa_alloc_device()
vp_vdpa: Fix return value check for vdpa_alloc_device()
vdpa_sim: Fix return value check for vdpa_alloc_device()
vhost: Fix the calculation in vhost_overflow()
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
virtio_pci: Support surprise removal of virtio pci device
virtio: Protect vqs list access
virtio: Keep vring_del_virtqueue() mirror of VQ create
virtio: Improve vq->broken access to avoid any compiler optimization
get_queue_type() comments that splict virtqueue is preferred, however,
the actual logic preferred packed virtqueues. Since firmware has not
supported packed virtqueues we ended up using split virtqueues as was
desired.
Since we do not advertise support for packed virtqueues, we add a check
to verify split virtqueues are indeed supported.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210811053759.66752-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code treats an empty iotlb provdied in set_map() as a
special case and destroy the memory region object. This must not be done
since the virtqueue objects reference this MR. Doing so will cause the
driver unload to emit errors and log timeouts caused by the firmware
complaining on busy resources.
This patch treats an empty iotlb as any other change of mapping. In this
case, mlx5_vdpa_create_mr() will fail and the entire set_map() call to
fail.
This issue has not been encountered before but was seen to occur in a
non-official version of qemu. Since qemu is a userspace program, the
driver must protect against such case.
Fixes: 94abbccdf2 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210811053713.66658-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa_alloc_device() returns an error pointer upon
failure, not NULL. To handle the failure correctly, this
replaces NULL check with IS_ERR() check and propagate the
error upwards.
Fixes: 5a2414bc45 ("virtio: Intel IFC VF driver for VDPA")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-3-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The vdpa_alloc_device() returns an error pointer upon
failure, not NULL. To handle the failure correctly, this
replaces NULL check with IS_ERR() check and propagate the
error upwards.
Fixes: 64b9f64f80 ("vdpa: introduce virtio pci driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-2-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The vdpa_alloc_device() returns an error pointer upon
failure, not NULL. To handle the failure correctly, this
replaces NULL check with IS_ERR() check and propagate the
error upwards.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210715080026.242-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The CQ destroy is performed based on the IRQ number that is stored in
cq->irqn. That number wasn't set explicitly during CQ creation and as
expected some of the API users of mlx5_core_create_cq() forgot to update
it.
This caused to wrong synchronization call of the wrong IRQ with a number
0 instead of the real one.
As a fix, set the IRQ number directly in the mlx5_core_create_cq() and
update all users accordingly.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Fixes: ef1659ade3 ("IB/mlx5: Add DEVX support for CQ events")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().
c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.
Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We used to fail the set_vq_state() since it was not supported yet by
the virtio spec. But if the bus tries to set the state which is equal
to the device initial state after reset, we can let it go.
This is a must for virtio_vdpa() to set vq state during probe which is
required for some vDPA parents.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
This patch extends the vdpa_vq_state to support packed virtqueue
state which is basically the device/driver ring wrap counters and the
avail and used index. This will be used for the virito-vdpa support
for the packed virtqueue and the future vhost/vhost-vdpa support for
the packed virtqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602021536.39525-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
After device reset, the virtqueues are not ready so clear the ready
field.
Failing to do so can result in virtio_vdpa failing to load if the device
was previously used by vhost_vdpa and the old values are ready.
virtio_vdpa expects to find VQs in "not ready" state.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210606053128.170399-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Implement mlx5_get_vq_notification() to return the doorbell address.
Since the notification area is mapped to userspace, make sure that the
BAR size is at least PAGE_SIZE large.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210603081153.5750-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In order to support running vdpa using vritio_vdpa driver, we need to
create a different kind of MR, one that has 1:1 mapping, since the
addresses referring to virtqueues are dma addresses.
We create the 1:1 MR in mlx5_vdpa_dev_add() only in case firmware
supports the general capability umem_uid_0. The reason for that is that
1:1 MRs must be created with uid == 0 while virtqueue objects can be
created with uid == 0 only when the firmware capability is on.
If the set_map() callback is called with new translations provided
through iotlb, the driver will destroy the 1:1 MR and create a regular
one.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210602085854.62690-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Before SF support was introduced, the DMA device was equal to
mdev->device which was in essence equal to pdev->dev.
With SF introduction this is no longer true. It has already been
handled for vhost_vdpa since the reference to the dma device can from
within mlx5_vdpa. With virtio_vdpa this broke. To fix this we set the
real dma device when initializing the device.
In addition, for the sake of consistency, previous references in the
code to the dma device are changed to vdev->dma_dev.
Fixes: d13a15d544 ("vdpa/mlx5: Use the correct dma device when registering memory")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210606053150.170489-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Currently all resources must be created with uid != 0 which is essential
when userspace processes are allocating virtquueue resources. Since this
is a kernel implementation, it is perfectly legal to open resources with
uid == 0.
In case firmware supports, avoid allocating user context.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210531160404.31368-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
umem size is a 32 bit unsigned value so assigning it to an int could
cause false failures. Set the calculated value inside the function and
modify function name to reflect the fact it updates the size.
This bug was found during code review but never had real impact to this
date.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210530090349.8360-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Fix copy paste bug assigning umem1 size to umem2 and umem3. The issue
was discovered when trying to use a 1:1 MR that covers the entire
address space where firmware complained that provided sizes are not
large enough. 1:1 MRs are required to support virtio_vdpa.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210530090317.8284-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We forget to assign a error value when we fail to map the notification
during prove. This patch fixes it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 11d8ffed00 ("vp_vdpa: switch to use vp_modern_map_vq_notify()")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210624035939.26618-1-jasowang@redhat.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements doorbell mapping feature for ifcvf.
This feature maps the notify page to userspace, to eliminate
vmexit when kick a vq.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20210602084550.289599-3-lingshan.zhu@intel.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit records virtio notify base physical addr and
calculate doorbell physical address for vqs.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210602084550.289599-2-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In commit 7d189f617f ("vdpa_sim_blk: implement ramdisk behaviour")
linux/blkdev.h was included here causing the duplicate include.
Remove the later duplicate include.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210510024307.7143-1-wanjiabing@vivo.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
net/mlx5: Expose MPFS configuration API
MPFS is the multi physical function switch that bridges traffic between
the physical port and any physical functions associated with it. The
driver is required to add or remove MAC entries to properly forward
incoming traffic to the correct physical function.
We export the API to control MPFS so that other drivers, such as
mlx5_vdpa are able to add MAC addresses of their network interfaces.
The MAC address of the vdpa interface must be configured into the MPFS L2
address. Failing to do so could cause, in some NIC configurations, failure
to forward packets to the vdpa network device instance.
Fix this by adding calls to update the MPFS table.
CC: <mst@redhat.com>
CC: <jasowang@redhat.com>
CC: <virtualization@lists.linux-foundation.org>
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
