Commit Graph

3923 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
13906db670 powerpc/powernv: Return secondary CPUs to firmware on kexec
With OPAL v3 we can return secondary CPUs to firmware on kexec. This
allows firmware to do various cleanups making things generally more
reliable, and will enable the "new" kernel to call OPAL to perform
some reconfiguration tasks early on that can only be done while
all the CPUs are in firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 17:43:50 +10:00
Benjamin Herrenschmidt
3f1f431188 Merge branch 'merge' into next
Merge stuff that already went into Linus via "merge" which
are pre-reqs for subsequent patches
2013-08-27 15:03:30 +10:00
Tyrel Datwyler
5935ff4343 powerpc/pseries: Child nodes are not detached by dlpar_detach_node
Calls to dlpar_detach_node do not iterate over child nodes detaching them as
well. By iterating and detaching the child nodes we ensure that they have the
OF_DETACHED flag set and that their reference counts are decremented such that
the node will be freed from memory by of_node_release.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:16 +10:00
Tyrel Datwyler
14cd820a2a powerpc/pseries: Add mising of_node_put in delete_dt_node
The node to be detached is retrieved via its phandle by a call to
of_find_node_by_phandle which increments the ref count. We need a matching
call to of_node_put to decrement the ref count and ensure the node is
actually freed.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:15 +10:00
Tyrel Datwyler
8d5ff32076 powerpc/pseries: Make dlpar_configure_connector parent node aware
Currently the device nodes created in the device subtree returned by a call to
dlpar_configure_connector are all named in the root node. This is because the
the node name in the work area returned by ibm,configure-connector rtas call
only contains the node name and not the entire node path. Passing the parent
node where the new subtree will be created to dlpar_configure_connector allows
the correct node path to be prefixed in the full_name field.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:14 +10:00
Tyrel Datwyler
1578cb76d4 powerpc/pseries: Do all node initialization in dlpar_parse_cc_node
Currently the OF_DYNAMIC and kref initialization for a node happens in
dlpar_attach_node. However, a node passed to dlpar_attach_node may be a tree
containing child nodes, and no initialization traversal is done on the
tree. Since the children never get their kref initialized or the OF_DYNAMIC
flag set these nodes are prevented from ever being released from memory
should they become detached. This initialization step is better done at the
time each node is allocated in dlpar_parse_cc_node.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:13 +10:00
Tyrel Datwyler
c8f5a57c62 powerpc/pseries: Fix parsing of initial node path in update_dt_node
On the first call to ibm,update-properties for a node the first property
returned is the full node path. Currently this is not parsed correctly by the
update_dt_node function. Commit 2e9b7b0 attempted to fix this, but was
incorrect as it made a wrong assumption about the layout of the first
property in the work area. Further, if ibm,update-properties must be called
multiple times for the same node this special property should only be skipped
after the initial call. The first property descriptor returned consists of
the property name, property value length, and property value. The property
name is an empty string, property length is encoded in 4 byte integer, and
the property value is the node path.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:13 +10:00
Tyrel Datwyler
d0ef440350 powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header
The work area buffer returned by the ibm,update-properties rtas call contains
20 bytes of header information prior to the property value descriptor data.
Currently update_dt_node tries to advance over this header using sizeof(upwa).
The update_props_workarea struct contains 20 bytes worth of fields, that map
to the relevant header data, but the sizeof the structure is 24 bytes due to
4 bytes of padding at the end of the structure. Packing the structure ensures
that we don't advance too far over the rtas buffer.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:12 +10:00
Tyrel Datwyler
638a405fb5 powerpc/pseries: Fix over writing of rtas return code in update_dt_node
The rc variable is initially used to store the return code from the
ibm,update-properties rtas call which returns 0 or 1 on success. A return
code of 1 indicates that ibm,update-properties must be called again for the
node. However, the rc variable is overwritten by a call to update_dt_prop
which returns 0 on success. This results in ibm,update-properties not being
called again for the given node when the rtas call rc was previously 1.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:11 +10:00
Tyrel Datwyler
d8e533b45f powerpc/pseries: Fix creation of loop in device node property list
The update_dt_prop helper function fails to set the IN/OUT parameter prop to
NULL after a complete property has been parsed from the work area returned by
the ibm,update-properties rtas function. This results in the property list of
the device node being updated is corrupted and becomes a loop since the same
property structure is used repeatedly.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:45:10 +10:00
Michael Ellerman
b89bdfb8de powerpc/pseries: Add a warning in the case of cross-cpu VPA registration
The spec says it "may be problematic" if CPU x registers the VPA of
CPU y. Add a warning in case we ever do that.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:44:28 +10:00
Deepthi Dharwar
212bebb409 pseries: Move plpar_wrapper.h to powerpc common include/asm location.
As a part of pseries_idle backend driver cleanup to make
the code common to both pseries and powernv platforms, it
is necessary to move the backend-driver code to drivers/cpuidle.

As a pre-requisite for that, it is essential to move plpar_wrapper.h
to include/asm.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:43:05 +10:00
Deepthi Dharwar
9b3fbd6c2a pseries/cpuidle: Remove dependency of pseries.h file
As a part of pseries_idle cleanup to make the backend driver
code common to both pseries and powernv.
Remove non-essential smt_snooze_delay declaration in pseries.h
header file and pseries.h file inclusion in
pseries/processor_idle.c

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 14:36:09 +10:00
Mingkai Hu
622e03eb34 powerpc/85xx: Add C293PCIE board support
C293PCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module.

 - 512KB platform SRAM in addition to 512K L2 Cache/SRAM
 - 512MB soldered DDR3 32bit memory
 - CPLD System Logic
 - 64MB x16 NOR flash and 4GB x8 NAND flash
 - 16MB SPI flash

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Po Liu <Po.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23 19:43:24 -05:00
Chunhe Lan
75898156bc powerpc/85xx: Add P1023RDB board support
P1023RDB Specification:
-----------------------
Memory subsystem:
   512MB DDR3 (Fixed DDR on board)
   64MB NOR flash
   128MB NAND flash

Ethernet:
   eTSEC1: Connected to Atheros AR8035 GETH PHY
   eTSEC2: Connected to Atheros AR8035 GETH PHY

PCIe:
   Three mini-PCIe slots

USB:
   Two USB2.0 Type A ports

I2C:
   AT24C08 8K Board EEPROM (8 bit address)

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23 19:14:21 -05:00
Scott Wood
01718ba6ec powerpc/booke64: Use appropriate -mcpu
By default use -mcpu=powerpc64 rather than -mtune=power7

Add options for e5500/e6500, with fallbacks for older compilers.

Hide the POWER cpu options in booke configs.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-20 19:55:36 -05:00
Scott Wood
beb2dc0a7a powerpc: Convert some mftb/mftbu into mfspr
Some CPUs (such as e500v1/v2) don't implement mftb and will take a
trap.  mfspr should work on everything that has a timebase, and is the
preferred instruction according to ISA v2.06.

Currently we get away with mftb on 85xx because the assembler converts
it to mfspr due to -Wa,-me500.  However, that flag has other effects
that are undesireable for certain targets (e.g.  lwsync is converted to
sync), and is hostile to multiplatform kernels.  Thus we would like to
stop setting it for all e500-family builds.

mftb/mftbu instances which are in 85xx code or common code are
converted.  Instances which will never run on 85xx are left alone.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-20 19:33:12 -05:00
Scott Wood
d52459ca30 powerpc/fsl-booke: Work around erratum A-006958
Erratum A-006598 says that 64-bit mftb is not atomic -- it's subject
to a similar race condition as doing mftbu/mftbl on 32-bit.  The lower
half of timebase is updated before the upper half; thus, we can share
the workaround for a similar bug on Cell.  This workaround involves
looping if the lower half of timebase is zero, thus avoiding the need
for a scratch register (other than CR0).  This workaround must be
avoided when the timebase is frozen, such as during the timebase sync
code.

This deals with kernel and vdso accesses, but other userspace accesses
will of course need to be fixed elsewhere.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-20 15:45:49 -05:00
Anton Blanchard
a02f6dfc95 powerpc/pseries: Fix endian issues in H_GET_TERM_CHAR/H_PUT_TERM_CHAR
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:38 +10:00
Anton Blanchard
7ffcf8ec26 powerpc: Fix little endian lppaca, slb_shadow and dtl_entry
The lppaca, slb_shadow and dtl_entry hypervisor structures are
big endian, so we have to byte swap them in little endian builds.

LE KVM hosts will also need to be fixed but for now add an #error
to remind us.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:35 +10:00
Anton Blanchard
2083f681e3 powerpc: of_parse_dma_window should take a __be32 *dma_window
We pass dma_window to of_parse_dma_window as a void * and then
run through hoops to cast it back to a u32 array. In the process
we lose endian annotation.

Simplify it by just passing a __be32 * down.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:26 +10:00
Mike Qiu
202127031a powerpc/eeh: powerpc/eeh: Fix undefined variable
changes for V4:
	- changes the type of frozen_pe_no from %d to %llu
	  in pr_devel()

'pe_no' hasn't been defined, it should be an typo error,
it should be 'frozen_pe_no'.

Also '__func__' has missed in IODA_EEH_DBG(),

For safety reasons, use pr_devel() directly, instead
of use IODA_EEH_DBG()

Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:16 +10:00
Benjamin Herrenschmidt
8a05dd8514 powerpc/powernv: Enable detection of legacy UARTs
Legacy UARTs can exist on PowerNV, memory-mapped ones on PCI
or IO based ones on the LPC bus.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:58:34 +10:00
Benjamin Herrenschmidt
2db29d28eb powerpc/powernv: Don't crash if there are no OPAL consoles
Some machines might provide the console via a different mechanism
such as direct access to a UART from Linux, in which case OPAL
might not expose any console. In that case, the code would cause
a NULL dereference.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:58:27 +10:00
Benjamin Herrenschmidt
3fafe9c202 powerpc/powernv: Add PIO accessors for Power8 LPC bus
This uses the hooks provided by CONFIG_PPC_INDIRECT_PIO to
implement a set of hooks for IO port access to use the LPC
bus via OPAL calls for the first 64K of IO space

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:58:08 +10:00
Benjamin Herrenschmidt
cc0efb57eb powerpc/powernv: Update opal.h to add new LPC and XSCOM functions
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:56 +10:00
Benjamin Herrenschmidt
ecd73cc5c9 powerpc: Better split CONFIG_PPC_INDIRECT_PIO and CONFIG_PPC_INDIRECT_MMIO
Remove the generic PPC_INDIRECT_IO and ensure we only add overhead
to the right accessors. IE. If only CONFIG_PPC_INDIRECT_PIO is set,
we don't add overhead to all MMIO accessors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:50 +10:00
Gavin Shan
c35d2a8c5f powerpc/powernv: Needn't IO segment map for PHB3
PHB3 doesn't support IO ports and we needn't IO segment map for that.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:32 +10:00
Gavin Shan
2f1ec02ea1 powerpc/powernv: Check primary PHB through ID
The index of one specific PCI controller (struct pci_controller::
global_number) can tell that it's primary one or not. So we needn't
additional variable for that and just remove it.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:29 +10:00
Gavin Shan
f1b7cc3ec1 powerpc/powernv: Fetch PHB bus range from dev-tree
The patch enables fetching bus range from device-tree for the
specific PHB. If we can't get that from device-tree, the default
range [0 255] will be used.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:25 +10:00
Gavin Shan
58d714ec7a powerpc/powernv: Free PHB instance upon error
We don't free PHB instance (struct pnv_phb) on error to creating
the associated PCI controler (struct pci_controller). The patch
fixes that. Also, the output messages have been cleaned for a bit
so that they looks unified for IODA_1/2 cases.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:21 +10:00
Andy Fleming
39fd40274d powerpc: Convert platforms to smp_generic_cpu_bootable
T4, Cell, powernv, and pseries had the same implementation, so switch
them to use a generic version. A2 apparently had a version, but
removed it at some point, so we remove the declaration, too.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:56:57 +10:00
Anton Blanchard
f13c13a005 powerpc: Stop using non-architected shared_proc field in lppaca
Although the shared_proc field in the lppaca works today, it is
not architected. A shared processor partition will always have a non
zero yield_count so use that instead. Create a wrapper so users
don't have to know about the details.

In order for older kernels to continue to work on KVM we need
to set the shared_proc bit. While here, remove the ugly bitfield.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 11:50:26 +10:00
Anton Blanchard
b0d436c739 powerpc: Fix a number of sparse warnings
Address some of the trivial sparse warnings in arch/powerpc.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 11:50:24 +10:00
Anton Blanchard
a0a96ee9ba powerpc/pseries: Simplify H_GET_TERM_CHAR
plpar_get_term_char is only used once and just adds a layer
of complexity to H_GET_TERM_CHAR. plpar_put_term_char isn't
used at all so we can remove it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 11:50:23 +10:00
Aruna Balakrishnaiah
156c9ebdac powerpc/pseries: Add backward compatibilty to read old kernel oops-log
Older kernels has just length information in their header. Handle it
while reading old kernel oops log from pstore.

Applies on top of powerpc/pseries: Fix buffer overflow when reading from pstore

Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-09 18:06:44 +10:00
Aruna Balakrishnaiah
7e76f34fa1 powerpc/pseries: Fix buffer overflow when reading from pstore
When reading from pstore there is a buffer overflow during decompression
due to the header added in unzip_oops. Remove unzip_oops and call
pstore_decompress directly in nvram_pstore_read. Allocate buffer of size
report_length of the oops header as header will not be deallocated in pstore.
Since we have 'openssl' command line tool to decompress the compressed data,
dump the compressed data in case decompression fails instead of not dumping
anything.

Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-09 18:06:40 +10:00
Benjamin Herrenschmidt
a12e4537ad Merge remote-tracking branch 'scott/next' into next
Merge some Freescale updates from Scott Wood
2013-08-09 16:01:40 +10:00
Kevin Hao
7d4d595dad powerpc/mpc85xx: remove the unneeded pci init functions for corenet ds board
The function pci_devs_phb_init is invoked more earlier than we really
probe the pci controller, so it does nothing at all. And we also don't
need the pci_dn stuff for the fsl powerpc64 boards, just remove it.

It also seems that we don't support ISA on all the current corenet ds
boards. So picking a primary bus seems useless, remove that function
too.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
2013-08-07 18:38:07 -05:00
Haijun.Zhang
550593e8f5 powerpc/85xx: add P1020RDB-PD platform support
The p1020rdb-pd has the similar feature as the p1020rdb.
Therefore, p1020rdb-pd use the same platform file as the p1/p2 rdb board.
Overview of P1020RDB-PD platform:
- DDR3 2GB
- NOR flash 64MB
- NAND flash 128MB
- SPI flash 16MB
- I2C EEPROM 256Kb
	- eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch
	- eTSEC2 (SGMII PHY)
- eTSEC3 (RGMII PHY)
	- SDHC
	- 2 USB ports
	- 4 TDM ports
	- PCIe

Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07 18:38:06 -05:00
Bjorn Helgaas
679750054a powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init
Mark pnv_pci_init_ioda2_phb() as __init.  It is called only from an
init function (pnv_pci_init()), and it calls an init function
(pnv_pci_init_ioda_phb()):

    pnv_pci_init                # init
      pnv_pci_init_ioda2_phb    # non-init
	pnv_pci_init_ioda_phb   # init

This should fix a section mismatch warning.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:42:27 +10:00
Denis Kirjanov
ad92c61597 powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert()
Commit 801eb73f45 introduced
a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag
when __PAGE_NO_CACHE is set and the cache update policy is not write-through
(i.e. _PAGE_WRITETHRU is not set)

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC:  Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:42:18 +10:00
Gavin Shan
ab55d2187d powerpc/eeh: Introdce flag to protect sysfs
The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs
entries for the corresponding EEH device (then PCI device) has been
added or removed, in order to avoid race condition.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:18:49 +10:00
Gavin Shan
4b83bd452f powerpc/eeh: Don't use pci_dev during BAR restore
While restoring BARs for one specific PCI device, the pci_dev
instance should have been released. So it's not reliable to use
the pci_dev instance on restoring BARs. However, we still need
some information (e.g. PCIe capability position, header type) from
the pci_dev instance. So we have to store those information to
EEH device in advance.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:18:49 +10:00
Gavin Shan
f5c57710dd powerpc/eeh: Use partial hotplug for EEH unaware drivers
When EEH error happens to one specific PE, some devices with drivers
supporting EEH won't except hotplug on the device. However, there
might have other deivces without driver, or with driver without EEH
support. For the case, we need do partial hotplug in order to make
sure that the PE becomes absolutely quite during reset. Otherise,
the PE reset might fail and leads to failure of error recovery.

The current code doesn't handle that 'mixed' case properly, it either
uses the error callbacks to the drivers, or tries hotplug, but doesn't
handle a PE (EEH domain) composed of a combination of the two.

The patch intends to support so-called "partial" hotplug for EEH:
Before we do reset, we stop and remove those PCI devices without
EEH sensitive driver. The corresponding EEH devices are not detached
from its PE, but with special flag. After the reset is done, those
EEH devices with the special flag will be scanned one by one.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:18:48 +10:00
Mahesh Salgaonkar
ee1dd1e3dc powerpc: Fix the corrupt r3 error during MCE handling.
During Machine Check interrupt on pseries platform, R3 generally points to
memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS
delivers the machine check exception it passes the address inside FWNMI area
with the top most bit set. This patch fixes this issue by masking top two bit
in machine check exception handler.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:18:45 +10:00
Paul Bolle
97645154a9 powerpc/pseries: Drop "select HOTPLUG"
The Kconfig symbol HOTPLUG was removed with commit 40b313608a ("Finally
eradicate CONFIG_HOTPLUG"). But there's still one select statement for
that symbol. It seems that select statement was added after the patch to
remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be
dropped.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-24 14:18:44 +10:00
Linus Torvalds
2cb7b5a38c irqdomain refactoring for v3.11
This is the long awaited simplification of irqdomain. It gets rid of the
 different types of irq domains and instead both linear and tree mappings
 can be supported in a single domain. Doing this removes a lot of special
 case code and makes irq domains simpler to understand overall.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR1mnQAAoJEEFnBt12D9kBW7gP/jQpLqFU6PTdsCMX459Ib7fE
 JGLQWYjAsqVbVT3H8LZYOZl+ItIbXSQVk+wf0mislnOzxtGxNCxZeJdniFK2RWyz
 sGNm/eEZfp9bvm9jlrPE615QE7U7c9fQ5dqETNS4UMMFFmjgrsY4Z82zYH2/Y/jK
 YbxFUT6+fep5QaF7lYM7phfrs7FrvnpCoxCio6LO+GgxnMxHSsGJ8L9JcojZ5Qoa
 MwlSwsMaQrWJ6PNVbB2YrtlMxjHkNpQ7EV7bNF693PjACVpXf3ItpvQ1k6W/ns06
 j6Nysj4nbjsTdWOVh5mY7tPfknZUDs38rLT5s+RbfHqySMIGQXp6CzieYaJ+lxV9
 YsItyfZE7h3anebjwRv/9XqLNsDM4KmSIJGcnq+QxNSGxO3rXkItWtpCKaqYdWnN
 wI359rSZ//x2ltFzvB14mZJm2j7r9Hh7gH8M5h8W8YTqCbe3oSES3iRhJqnyPxMX
 of4PsQaTAicuLwberGdVkKafg9XIsHPoebBzDxssB4nxPrEKIILL4g54x1rV17TZ
 kBXurd79FhP4gOQxJHf5uEpdxrQ3Cm/PQpD5CG2rZJrrcV7hfP4QMMFHqqbFSIOu
 2h4M4fZX2gsDh3RLboGRGn0GckSPTHiO05yeeBriLzMCVGcZ1JMqAxLUSJpH/UYl
 EzFy9RpwnwLoUPi8jUXE
 =yJRw
 -----END PGP SIGNATURE-----

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux

Pull irqdomain refactoring from Grant Likely:
 "This is the long awaited simplification of irqdomain.  It gets rid of
  the different types of irq domains and instead both linear and tree
  mappings can be supported in a single domain.  Doing this removes a
  lot of special case code and makes irq domains simpler to understand
  overall"

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux:
  irq: fix checkpatch error
  irqdomain: Include hwirq number in /proc/interrupts
  irqdomain: make irq_linear_revmap() a fast path again
  irqdomain: remove irq_domain_generate_simple()
  irqdomain: Refactor irq_domain_associate_many()
  irqdomain: Beef up debugfs output
  irqdomain: Clean up aftermath of irq_domain refactoring
  irqdomain: Eliminate revmap type
  irqdomain: merge linear and tree reverse mappings.
  irqdomain: Add a name field
  irqdomain: Replace LEGACY mapping with LINEAR
  irqdomain: Relax failure path on setting up mappings
2013-07-06 12:37:04 -07:00
Linus Torvalds
65b97fb730 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc changes for the 3.11 merge window.  In addition to
  the usual bug fixes and small updates, the main highlights are:

   - Support for transparent huge pages by Aneesh Kumar for 64-bit
     server processors.  This allows the use of 16M pages as transparent
     huge pages on kernels compiled with a 64K base page size.

   - Base VFIO support for KVM on power by Alexey Kardashevskiy

   - Wiring up of our nvram to the pstore infrastructure, including
     putting compressed oopses in there by Aruna Balakrishnaiah

   - Move, rework and improve our "EEH" (basically PCI error handling
     and recovery) infrastructure.  It is no longer specific to pseries
     but is now usable by the new "powernv" platform as well (no
     hypervisor) by Gavin Shan.

   - I fixed some bugs in our math-emu instruction decoding and made it
     usable to emulate some optional FP instructions on processors with
     hard FP that lack them (such as fsqrt on Freescale embedded
     processors).

   - Support for Power8 "Event Based Branch" facility by Michael
     Ellerman.  This facility allows what is basically "userspace
     interrupts" for performance monitor events.

   - A bunch of Transactional Memory vs.  Signals bug fixes and HW
     breakpoint/watchpoint fixes by Michael Neuling.

  And more ...  I appologize in advance if I've failed to highlight
  something that somebody deemed worth it."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
  pstore: Add hsize argument in write_buf call of pstore_ftrace_call
  powerpc/fsl: add MPIC timer wakeup support
  powerpc/mpic: create mpic subsystem object
  powerpc/mpic: add global timer support
  powerpc/mpic: add irq_set_wake support
  powerpc/85xx: enable coreint for all the 64bit boards
  powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx
  powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
  powerpc/mpic: Add get_version API both for internal and external use
  powerpc: Handle both new style and old style reserve maps
  powerpc/hw_brk: Fix off by one error when validating DAWR region end
  powerpc/pseries: Support compression of oops text via pstore
  powerpc/pseries: Re-organise the oops compression code
  pstore: Pass header size in the pstore write callback
  powerpc/powernv: Fix iommu initialization again
  powerpc/pseries: Inform the hypervisor we are using EBB regs
  powerpc/perf: Add power8 EBB support
  powerpc/perf: Core EBB support for 64-bit book3s
  powerpc/perf: Drop MMCRA from thread_struct
  powerpc/perf: Don't enable if we have zero events
  ...
2013-07-04 10:29:23 -07:00
Linus Torvalds
f991fae5c6 Power management and ACPI updates for 3.11-rc1
- Hotplug changes allowing device hot-removal operations to fail
   gracefully (instead of crashing the kernel) if they cannot be
   carried out completely.  From Rafael J Wysocki and Toshi Kani.
 
 - Freezer update from Colin Cross and Mandeep Singh Baines targeted
   at making the freezing of tasks a bit less heavy weight operation.
 
 - cpufreq resume fix from Srivatsa S Bhat for a regression introduced
   during the 3.10 cycle causing some cpufreq sysfs attributes to
   return wrong values to user space after resume.
 
 - New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to
   provide information previously available via related_cpus from
   Lan Tianyu.
 
 - cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin,
   Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and
   Tang Yuantian.
 
 - Fix for an ACPICA regression causing suspend/resume issues to
   appear on some systems introduced during the 3.4 development cycle
   from Lv Zheng.
 
 - ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng,
   Chao Guan, and Zhang Rui.
 
 - New cupidle driver for Xilinx Zynq processors from Michal Simek.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - Changes to make suspend/resume work correctly in Xen guests from
   Konrad Rzeszutek Wilk.
 
 - ACPI device power management fixes and cleanups from Fengguang Wu
   and Rafael J Wysocki.
 
 - ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo.
 
 - Fix for the IA-64 issue that was the reason for reverting commit
   9f29ab1 and updates of the ACPI scan code from Rafael J Wysocki.
 
 - Mechanism for adding CMOS RTC address space handlers from Lan Tianyu
   (to allow some EC-related breakage to be fixed on some systems).
 
 - Spec-compliant implementation of acpi_os_get_timer() from
   Mika Westerberg.
 
 - Modification of do_acpi_find_child() to execute _STA in order to
   to avoid situations in which a pointer to a disabled device object
   is returned instead of an enabled one with the same _ADR value.
   From Jeff Wu.
 
 - Intel BayTrail PCH (Platform Controller Hub) support for the ACPI
   Intel Low-Power Subsystems (LPSS) driver and modificaions of that
   driver to work around a couple of known BIOS issues from
   Mika Westerberg and Heikki Krogerus.
 
 - EC driver fix from Vasiliy Kulikov to make it use get_user() and
   put_user() instead of dereferencing user space pointers blindly.
 
 - Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and
   Toshi Kani.
 
 - Modification of the "runtime idle" helper routine to take the return
   values of the callbacks executed by it into account and to call
   rpm_suspend() if they return 0, which allows some code bloat
   reduction to be done, from Rafael J Wysocki and Alan Stern.
 
 - New trace points for PM QoS from Sahara <keun-o.park@windriver.com>.
 
 - PM QoS documentation update from Lan Tianyu.
 
 - Assorted core PM code cleanups and changes from Bernie Thompson,
   Bjorn Helgaas, Julius Werner, and Shuah Khan.
 
 - New devfreq driver for the Exynos5-bus device from Abhilash Kesavan.
 
 - Minor devfreq cleanups, fixes and MAINTAINERS update from
   MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and
   Wei Yongjun.
 
 - OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control
   driver updates from Andrii Tseglytskyi and Nishanth Menon.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0ZNOAAoJEKhOf7ml8uNsDLYP/0EU4rmvw0TWTITfp6RS1KDE
 9GwBn96ZR4Q5bJd9gBCTPSqhHOYMqxWEUp99sn/M2wehG1pk/jw5LO56+2IhM3UZ
 g1HDcJ7te2nVT/iXsKiAGTVhU9Rk0aYwoVSknwk27qpIBGxW9w/s5tLX8pY3Q3Zq
 wL/7aTPjyL+PFFFEaxgH7qLqsl3DhbtYW5AriUBTkXout/tJ4eO1b7MNBncLDh8X
 VQ/0DNCKE95VEJfkO4rk9RKUyVp9GDn0i+HXCD/FS4IA5oYzePdVdNDmXf7g+swe
 CGlTZq8pB+oBpDiHl4lxzbNrKQjRNbGnDUkoRcWqn0nAw56xK+vmYnWJhW99gQ/I
 fKnvxeLca5po1aiqmC4VSJxZIatFZqLrZAI4dzoCLWY+bGeTnCKmj0/F8ytFnZA2
 8IuLLs7/dFOaHXV/pKmpg6FAlFa9CPxoqRFoyqb4M0GjEarADyalXUWsPtG+6xCp
 R/p0CISpwk+guKZR/qPhL7M654S7SHrPwd2DPF0KgGsvk+G2GhoB8EzvD8BVp98Z
 9siCGCdgKQfJQVI6R0k9aFmn/4gRQIAgyPhkhv9tqULUUkiaXki+/t8kPfnb8O/d
 zep+CA57E2G8MYLkDJfpFeKS7GpPD6TIdgFdGmOUC0Y6sl9iTdiw4yTx8O2JM37z
 rHBZfYGkJBrbGRu+Q1gs
 =VBBq
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the total number of ACPI commits is slightly greater than
  the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
  remains the most active patch submitter.

  To me, the most significant change is the addition of offline/online
  device operations to the driver core (with the Greg's blessing) and
  the related modifications of the ACPI core hotplug code.  Next are the
  freezer updates from Colin Cross that should make the freezing of
  tasks a bit less heavy weight.

  We also have a couple of regression fixes, a number of fixes for
  issues that have not been identified as regressions, two new drivers
  and a bunch of cleanups all over.

  Highlights:

   - Hotplug changes to support graceful hot-removal failures.

     It sometimes is necessary to fail device hot-removal operations
     gracefully if they cannot be carried out completely.  For example,
     if memory from a memory module being hot-removed has been allocated
     for the kernel's own use and cannot be moved elsewhere, it's
     desirable to fail the hot-removal operation in a graceful way
     rather than to crash the kernel, but currenty a success or a kernel
     crash are the only possible outcomes of an attempted memory
     hot-removal.  Needless to say, that is not a very attractive
     alternative and it had to be addressed.

     However, in order to make it work for memory, I first had to make
     it work for CPUs and for this purpose I needed to modify the ACPI
     processor driver.  It's been split into two parts, a resident one
     handling the low-level initialization/cleanup and a modular one
     playing the actual driver's role (but it binds to the CPU system
     device objects rather than to the ACPI device objects representing
     processors).  That's been sort of like a live brain surgery on a
     patient who's riding a bike.

     So this is a little scary, but since we found and fixed a couple of
     regressions it caused to happen during the early linux-next testing
     (a month ago), nobody has complained.

     As a bonus we remove some duplicated ACPI hotplug code, because the
     ACPI-based CPU hotplug is now going to use the common ACPI hotplug
     code.

   - Lighter weight freezing of tasks.

     These changes from Colin Cross and Mandeep Singh Baines are
     targeted at making the freezing of tasks a bit less heavy weight
     operation.  They reduce the number of tasks woken up every time
     during the freezing, by using the observation that the freezer
     simply doesn't need to wake up some of them and wait for them all
     to call refrigerator().  The time needed for the freezer to decide
     to report a failure is reduced too.

     Also reintroduced is the check causing a lockdep warining to
     trigger when try_to_freeze() is called with locks held (which is
     generally unsafe and shouldn't happen).

   - cpufreq updates

     First off, a commit from Srivatsa S Bhat fixes a resume regression
     introduced during the 3.10 cycle causing some cpufreq sysfs
     attributes to return wrong values to user space after resume.  The
     fix is kind of fresh, but also it's pretty obvious once Srivatsa
     has identified the root cause.

     Second, we have a new freqdomain_cpus sysfs attribute for the
     acpi-cpufreq driver to provide information previously available via
     related_cpus.  From Lan Tianyu.

     Finally, we fix a number of issues, mostly related to the
     CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
     up some code.  The majority of changes from Viresh Kumar with bits
     from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
     Arnd Bergmann, and Tang Yuantian.

   - ACPICA update

     A usual bunch of updates from the ACPICA upstream.

     During the 3.4 cycle we introduced support for ACPI 5 extended
     sleep registers, but they are only supposed to be used if the
     HW-reduced mode bit is set in the FADT flags and the code attempted
     to use them without checking that bit.  That caused suspend/resume
     regressions to happen on some systems.  Fix from Lv Zheng causes
     those registers to be used only if the HW-reduced mode bit is set.

     Apart from this some other ACPICA bugs are fixed and code cleanups
     are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
     Zhang Rui.

   - cpuidle updates

     New driver for Xilinx Zynq processors is added by Michal Simek.

     Multidriver support simplification, addition of some missing
     kerneldoc comments and Kconfig-related fixes come from Daniel
     Lezcano.

   - ACPI power management updates

     Changes to make suspend/resume work correctly in Xen guests from
     Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
     cleanups and fixes of the ACPI device power state selection
     routine.

   - ACPI documentation updates

     Some previously missing pieces of ACPI documentation are added by
     Lv Zheng and Aaron Lu (hopefully, that will help people to
     uderstand how the ACPI subsystem works) and one outdated doc is
     updated by Hanjun Guo.

   - Assorted ACPI updates

     We finally nailed down the IA-64 issue that was the reason for
     reverting commit 9f29ab11dd ("ACPI / scan: do not match drivers
     against objects having scan handlers"), so we can fix it and move
     the ACPI scan handler check added to the ACPI video driver back to
     the core.

     A mechanism for adding CMOS RTC address space handlers is
     introduced by Lan Tianyu to allow some EC-related breakage to be
     fixed on some systems.

     A spec-compliant implementation of acpi_os_get_timer() is added by
     Mika Westerberg.

     The evaluation of _STA is added to do_acpi_find_child() to avoid
     situations in which a pointer to a disabled device object is
     returned instead of an enabled one with the same _ADR value.  From
     Jeff Wu.

     Intel BayTrail PCH (Platform Controller Hub) support is added to
     the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
     driver is modified to work around a couple of known BIOS issues.
     Changes from Mika Westerberg and Heikki Krogerus.

     The EC driver is fixed by Vasiliy Kulikov to use get_user() and
     put_user() instead of dereferencing user space pointers blindly.

     Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
     Kani.

   - Assorted power management updates

     The "runtime idle" helper routine is changed to take the return
     values of the callbacks executed by it into account and to call
     rpm_suspend() if they return 0, which allows us to reduce the
     overall code bloat a bit (by dropping some code that's not
     necessary any more after that modification).

     The runtime PM documentation is updated by Alan Stern (to reflect
     the "runtime idle" behavior change).

     New trace points for PM QoS are added by Sahara
     (<keun-o.park@windriver.com>).

     PM QoS documentation is updated by Lan Tianyu.

     Code cleanups are made and minor issues are addressed by Bernie
     Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.

   - devfreq updates

     New driver for the Exynos5-bus device from Abhilash Kesavan.

     Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
     Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.

   - OMAP power management updates

     Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
     updates from Andrii Tseglytskyi and Nishanth Menon."

* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  cpufreq: Fix cpufreq regression after suspend/resume
  ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
  PM / Sleep: Warn about system time after resume with pm_trace
  cpufreq: don't leave stale policy pointer in cdbs->cur_policy
  acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
  cpufreq: make sure frequency transitions are serialized
  ACPI: implement acpi_os_get_timer() according the spec
  ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
  ACPI: Add CMOS RTC Operation Region handler support
  ACPI / processor: Drop unused variable from processor_perflib.c
  cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  ...
2013-07-03 14:35:40 -07:00