Commit Graph

9 Commits

Author SHA1 Message Date
Alexandre Pereira da Silva
1897fda941 ARM: dts: imx23-olinuxino: mark sdcard cd as broken
The imx23-olinuxino sdcard doesn't have card detect.

Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 14:15:23 +08:00
Fabio Estevam
664e9e495a ARM: dts: imx23-olinuxino: Fix IOMUX settings
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17
is the USB PHY reset.

So make the IOMUX assignment properly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 22:17:59 +08:00
Fadil Berisha
a04878645f ARM: imx23-olinuxino: Add spi support
imx23-olinuxino board has spi pins exposed on external connector.
This patch add spi support.

Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-20 21:46:14 +08:00
Fabio Estevam
098e752289 ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver
has pinctrl support, so setup the gpio led pin via pinctrl and avoid the
following warning:

leds-gpio leds.5: pins are not configured from the driver

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15 10:51:49 +08:00
Fabio Estevam
b34aa18502 ARM: dts: imx23-olinuxino: Remove unneeded "default-on"
The initial state of the gpio led can be set directly in "gpios" node.

Hence, linux,default-trigger can be removed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-15 10:51:49 +08:00
Fabio Estevam
b493129482 ARM: dts: imx23-olinuxino: Add USB host support
Add USB host support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-19 11:05:09 +08:00
Fabio Estevam
ba5db4990c ARM: olinuxino: Add gpio-led support
Olinuxino has a LED connected to MX23_PAD_SSP1_DETECT__GPIO_2_1 pin.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-23 10:01:38 +08:00
Fabio Estevam
98916a2fbc ARM: imx23-olinuxino.dts: Add AUART0 support
Add AUART0 support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-17 12:30:24 +08:00
Fabio Estevam
b9df44919c ARM: mx23: Add initial support for olinuxino board
mx23-olinuxino is a low cost board designed by Olimex.

It has the following features:

- Freescale iMX233 ARM926J processor at 454MHz
-64 MB RAM
-SD-card connector
-TV PAL/NTSC video output
-2 USB High Speed Hosts
-Ethernet 100 Mbit
-Stereo Audio Input
-Stereo Headphones Audio Output

More information at:
http://www.olimex.com/dev/imx233-olinuxino-maxi.html

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-05 09:40:51 +08:00