These tables are not large or overbearing, so moving them into the
source file seems like the right thing to do. The alternative is to
use __maybe_unused, which is undesirable.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:11:
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:7:23: warning: ‘qcom_compressed_supported_formats’ defined but not used [-Wunused-const-variable=]
7 | static const uint32_t qcom_compressed_supported_formats[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:48:23: warning: ‘plane_formats_yuv’ defined but not used [-Wunused-const-variable=]
48 | static const uint32_t plane_formats_yuv[] = {
| ^~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog_format.h:17:23: warning: ‘plane_formats’ defined but not used [-Wunused-const-variable=]
17 | static const uint32_t plane_formats[] = {
| ^~~~~~~~~~~~~
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:124:19: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:124:19: note: (near initialization for ‘sm8250_dpu_caps.max_linewidth’)
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'fmt' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'a' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'r' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'g' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'b' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e0' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e1' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e2' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'e3' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'uc' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'alpha' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'bp' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'flg' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'fm' not described in 'INTERLEAVED_RGB_FMT'
drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c:50: warning: Function parameter or member 'np' not described in 'INTERLEAVED_RGB_FMT'
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Fritz Koenig <frkoenig@google.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c:28: warning: Function parameter or member 'hw_blk' not described in 'dpu_hw_blk_init'
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_blk.c:120: warning: Excess function parameter 'free_blk' description in 'dpu_hw_blk_put'
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:31: warning: Enum value 'DPU_PERF_MODE_MAX' not described in enum 'dpu_perf_mode'
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:34: warning: Cannot understand * @_dpu_core_perf_calc_bw() - to calculate BW per crtc
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'kms' not described in '_dpu_core_perf_calc_clk'
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'crtc' not described in '_dpu_core_perf_calc_clk'
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:73: warning: Function parameter or member 'state' not described in '_dpu_core_perf_calc_clk'
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:249: warning: Cannot understand * @dpu_core_perf_crtc_release_bw() - request zero bandwidth
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kalyan Thota <kalyan_t@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'ctl' not described in 'mdp5_ctl_set_encoder_state'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'pipeline' not described in 'mdp5_ctl_set_encoder_state'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Function parameter or member 'enabled' not described in 'mdp5_ctl_set_encoder_state'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:227: warning: Excess function parameter 'enable' description in 'mdp5_ctl_set_encoder_state'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'ctl' not described in 'mdp5_ctl_commit'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'pipeline' not described in 'mdp5_ctl_commit'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'flush_mask' not described in 'mdp5_ctl_commit'
drivers/gpu/drm/msm/disp/mdp5/mdp5_ctl.c:529: warning: Function parameter or member 'start' not described in 'mdp5_ctl_commit'
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
- revert efivarfs kmemleak fix again - it was a false positive;
- make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does not
pull in other dependencies unnecessarily if CONFIG_EFI is not set
- defer attempts to load SSDT overrides from EFI vars until after the
efivar layer is up.
-----BEGIN PGP SIGNATURE-----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=gvBz
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"More EFI fixes forwarded from Ard Biesheuvel:
- revert efivarfs kmemleak fix again - it was a false positive
- make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does
not pull in other dependencies unnecessarily if CONFIG_EFI is not
set
- defer attempts to load SSDT overrides from EFI vars until after the
efivar layer is up"
* tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: EFI_EARLYCON should depend on EFI
efivarfs: revert "fix memory leak in efivarfs_create()"
efi/efivars: Set generic ops before loading SSDT
resctrl fs (Xiaochen Shen)
- Correct prctl(PR_GET_SPECULATION_CTRL) reporting (Anand K Mistry)
- A fix to not lose already seen MCE severity which determines whether
the machine can recover (Gabriele Paoloni)
-----BEGIN PGP SIGNATURE-----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=JrT9
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A couple of urgent fixes which accumulated this last week:
- Two resctrl fixes to prevent refcount leaks when manipulating the
resctrl fs (Xiaochen Shen)
- Correct prctl(PR_GET_SPECULATION_CTRL) reporting (Anand K Mistry)
- A fix to not lose already seen MCE severity which determines
whether the machine can recover (Gabriele Paoloni)"
* tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Do not overwrite no_way_out if mce_end() fails
x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb
x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak
x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak
In the Rockchip DRM LVDS component driver, the endpoint id provided to
drm_of_find_panel_or_bridge is grabbed from the endpoint's reg property.
However, the property may be missing in the case of a single endpoint.
Initialize the endpoint_id variable to 0 to avoid using an
uninitialized variable in that case.
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110200430.1713467-1-paul.kocialkowski@bootlin.com
Commit a408e4a86b ("ima: open a new file instance if no read
permissions") already introduced a second open to measure a file when the
original file descriptor does not allow it. However, it didn't remove the
existing method of changing the mode of the original file descriptor, which
is still necessary if the current process does not have enough privileges
to open a new one.
Changing the mode isn't really an option, as the filesystem might need to
do preliminary steps to make the read possible. Thus, this patch removes
the code and keeps the second open as the only option to measure a file
when it is unreadable with the original file descriptor.
Cc: <stable@vger.kernel.org> # 4.20.x: 0014cc04e8 ima: Set file->f_mode
Fixes: 2fe5d6def1 ("ima: integrity appraisal extension")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Use property name `phy-handle` instead of the deprecated `phy` to
connect eth2 to the PHY.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 7109d817db ("arm64: dts: marvell: add DTS for Turris Mox")
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
There are two SATA ports per CP110. Each of them has a dedicated
interrupt. Describe the real hardware by adding two SATA ports to the
CP110 SATA node.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This adds support for ESPRESSObin-Ultra from Globalscale.
Specifications are similar to the base ESPRESSObin board, with main
difference being being WAN port with PoE capability and 2 additional ethernet ports.
Full specifications:
1x Marvell 64 bit Dual Core ARM A53 Armada 3700 SOC clocked up to 1.2Ghz
1x Topaz 6341 Networking Switch
1GB DDR4
8GB eMMC
1x WAN with 30W POE
4x Gb LAN
1x RTC Clock and battery
1x DC Jack
1x USB 3.0 Type A
1x USB 2.0 Type A
1x SIM NanoSIM card Slot
1x Power Button
4x LED
1x Reset button
1x microUSB for UART
1x M.2 2280 slot for memory
1x 2x2 802.11ac Wi-Fi
1x MiniPCIE slot for Wi-Fi (PCIe interface)
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
LED2 is connected to MPP1_2 pin. It is working only on V7 boards.
V5 boards have hw bug which cause that LED2 is non-working.
So enable LED2 only for Espressobin V7 boards.
Note that LED1 is connected to LED_WLAN# pin on miniPCIe card and LED3 to
power supply. Therefore on Espressobin board only LED2 can be controlled
directly from the host. LED1 is possible to control via WiFi card inserted
in miniPCIe slot if driver for particular card supports it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Gérald Kerma <gerald@gk2.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add initial support for the IEI Puzzle-M801 1U Rackmount Network
Appliance board.
The board is based on the quad-core Marvell Armada 8040 SoC and supports
up to 16 GB of DDR4 2400 MHz ECC RAM. It has a PCIe x16 slot (x2 lanes
only) and an M.2 type B slot.
Main system hardware:
2x USB 3.0
4x Gigabit Ethernet
2x SFP+
1x SATA 3.0
1x M.2 type B
1x RJ45 UART
1x SPI flash
1x IEI WT61P803 PUZZLE Microcontroller
1x EPSON RX8010 RTC (used instead of the integrated Marvell RTC controller)
6x SFP+ LED
1x HDD LED
All of the hardware listed above is supported and tested in this port.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
We have switched mvebu tree to kernel.org now, so update in
MAINTAINERS file
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
An entry is added for MikroTik CRS3xx 98DX3236 based switches.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
eMMC definitions in files armada-3720-espressobin-emmc.dts and
armada-3720-espressobin-v7-emmc.dts is same. So move it into common
armada-3720-espressobin.dtsi file with status "disabled".
This change simplifies eMMC variants of DTS files for Espressobin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The included armada-37xx.dtsi already defines these two aliases.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Now that the switch ports have a label in the .dtsi, simplify the whole
"switch0" block for the v7 dts files.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add pinctrl information for the 98dx3236 (and variants). There is only
one choice for i2c0 MPP14 and MPP15.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The switches with integrated CPUs have only got a single i2c controller.
They incorrectly gained one when they were split from the Armada-XP.
Fixes: 43e28ba877 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS305-1G-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS326-24G-2S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
I've collected a handful of fixes over the past few weeks:
* A fix to un-break the build-id argument to the vDSO build, which is necessary
for the LLVM linker.
* A fix to initialize the jump label subsystem, without which it (and all the
stuff that uses it) doesn't actually function.
* A fix to include <asm/barrier.h> from <vdso/processor.h>, without which some
drivers won't compile.
I know it's the holidays, but I had some hiccups getting this tested earlier
this week so it's just going out now. None of these are tremendously urgent,
so if they don't make rc6 it's not a big deal. I'll have some more fixes
coming next week either way.
-----BEGIN PGP SIGNATURE-----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=E9OC
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I've collected a handful of fixes over the past few weeks:
- A fix to un-break the build-id argument to the vDSO build, which is
necessary for the LLVM linker.
- A fix to initialize the jump label subsystem, without which it (and
all the stuff that uses it) doesn't actually function.
- A fix to include <asm/barrier.h> from <vdso/processor.h>, without
which some drivers won't compile"
* tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix barrier() use in <vdso/processor.h>
RISC-V: Add missing jump label initialization
riscv: Explicitly specify the build id style in vDSO Makefile again
In current code, it jumps to ida_simple_remove() when ida_simple_get()
failes to allocate an ID. Just return to fix it.
Fixes: 0fae198988 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes: a1a8b4594f ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670fc ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b3292215 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dany Madden says:
====================
ibmvnic: assorted bug fixes
Assorted fixes for ibmvnic originated from "[PATCH net 00/15] ibmvnic:
assorted bug fixes" sent by Lijun Pan.
====================
Link: https://lore.kernel.org/r/20201126000432.29897-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce the wait time for Command Response Queue response from 30 seconds
to 20 seconds, as recommended by VIOS and Power Hypervisor teams.
Fixes: bd0b672313 ("ibmvnic: Move login and queue negotiation into ibmvnic_open")
Fixes: 53da09e929 ("ibmvnic: Add set_link_state routine for setting adapter link state")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reset timeout is going off right after adapter reset. This patch ensures
that timeout is scheduled if it has been 5 seconds since the last reset.
5 seconds is the default watchdog timeout.
Fixes: ed651a1087 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
send_login() does not check for the result of ibmvnic_send_crq() of the
login request. This results in the driver needlessly retrying the login
10 times even when CRQ is no longer active. Check the return code and
give up in case of errors in sending the CRQ.
The only time we want to retry is if we get a PARITALSUCCESS response
from the partner.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that
the worker thread will start reset process and free the login response
buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will
then try to access the login response buffer and crash.
Have ibmvnic track pending logins and discard any stale login responses.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If auto-priority failover is enabled, the backing device needs time
to settle if hard resetting fails for any reason. Add a delay of 60
seconds before retrying the hard-reset.
Fixes: 2770a7984d ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED
state and cannot recover in subsequent resets, leaving it offline.
This patch restores the adapter state to reset_state, the original
state when reset was called.
Fixes: b27507bb59 ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run")
Fixes: 2770a7984d ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scrq->msgs could be NULL during device reset, causing Linux to crash.
So, check before memset scrq->msgs.
Fixes: c8b2ad0a4a ("ibmvnic: Sanitize entire SCRQ buffer on reset")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ibmvnic fails to reset, it breaks out of the reset loop and frees
all of the remaining resets from the workqueue. Doing so prevents the
adapter from recovering if no reset is scheduled after that. Instead,
have the driver continue to process resets on the workqueue.
Remove the no longer need free_all_rwi().
Fixes: ed651a1087 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Inconsistent login with the vnicserver is causing the device to be
removed. This does not give the device a chance to recover from error
state. This patch schedules a FATAL reset instead to bring the adapter
up.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
by syzbot.
2) Remove spurious reports on nf_tables when lockdep gets disabled,
from Florian Westphal.
3) Fix memleak in the error path of error path of
ip_vs_control_net_init(), from Wang Hai.
4) Fix missing control data in flow dissector, otherwise IP address
matching in hardware offload infra does not work.
5) Fix hardware offload match on prefix IP address when userspace
does not send a bitwise expression to represent the prefix.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables_offload: build mask based from the matching bytes
netfilter: nftables_offload: set address type in control dissector
ipvs: fix possible memory leak in ip_vs_control_net_init
netfilter: nf_tables: avoid false-postive lockdep splat
netfilter: ipset: prevent uninit-value in hash_ip6_add
====================
Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
a proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.
As a result, "ip route get" can return a different route than what
would be used when sending real packets.
For example:
$ ip route add 192.0.2.11/32 dev eth0
$ ip route add unreachable 192.0.2.11/32 tos 2
$ ip route get 192.0.2.11 tos 2
RTNETLINK answers: No route to host
But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:
$ ping -c 1 -Q 2 192.0.2.11
PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms
--- 192.0.2.11 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms
This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.
Fixes: 3765d35ed8 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder says:
====================
net: ipa: start adding IPA v4.5 support
This series starts updating the IPA code to support IPA hardware
version 4.5.
The first patch fixes a problem found while preparing these updates.
Testing shows the code works with or without the change, and with
the fix the code matches "downstream" Qualcomm code.
The second patch updates the definitions for IPA register offsets
and field masks to reflect the changes that come with IPA v4.5. A
few register updates have been deferred until later, because making
use of them involves some nontrivial code updates.
One type of change that IPA v4.5 brings is expanding the range of
certain configuration values. High-order bits are added in a few
cases, and the third patch implements the code changes necessary to
use those newly available bits.
The fourth patch implements several fairly minor changes to the code
required for IPA v4.5 support.
The last two patches implement changes to the GSI registers used for
IPA. Almost none of the registers change, but the range of memory
in which most of the GSI registers is located is shifted by a fixed
amount. The fifth patch updates the GSI register definitions, and
the last patch implements the memory shift for IPA v4.5.
====================
Link: https://lore.kernel.org/r/20201125204522.5884-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The offsets for almost all GSI registers we use have different
offsets starting at IPA version 4.5. Only two registers remain
in their original location.
In a way though, the new register locations are not *that*
different. The entire group of affected registers has simply
been shifted down in memory by a fixed amount (0xd000). So for
example, the channel context 0 register that has a base offset of
0x0001c000 for "older" hardware now has a base offset of 0x0000f000.
This patch aims to add support for IPA v4.5 registers at their new
offets in a way that minimizes the amount of code that needs to
change. It is not ideal, but it avoids the need to maintain
a nearly complete set of additional register offset definitions.
The approach takes advantage of the fact that when accessing GSI
registers we do not access any of memory at lower end of the "gsi"
memory range (with two exceptions already noted). In particular,
we do not access anything within the bottom 0xd000 bytes of the
GSI memory range.
For IPA version 4.5, after we map the GSI memory, we adjust the
virtual memory pointer downward by the fixed amount (0xd000).
That way, register accesses using the offsets defined by the
existing GSI_REG_*() macros will resolve to the proper locations
for IPA version 4.5.
The two registers *not* affected by this offset are accessed only
in gsi_irq_setup(). There, for IPA version 4.5, we undo the general
register adjustment by adding the fixed amount back to the virtual
address to access these registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Very few GSI register definitions change for IPA v4.5, however
as a group their position in memory shifts a constant amount
(handled by the next commit).
Add definitions and update comments to the set of GSI registers to
support changes that come with IPA v4.5.
Update the logic in gsi_channel_program() to accommodate the new
(expanded) PREFETCH_MODE field in the CH_C_QOS register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the IPA code to make use of the updated IPA v4.5 register
definitions. Generally what this patch does is, if IPA v4.5
hardware is in use:
- Ensure new registers or fields in IPA v4.5 are updated where
required
- Ensure registers or fields not supported in IPA v4.5 are not
examined when read, or are set to 0 when written
It does this while preserving the existing functionality for IPA
versions lower than v4.5.
The values to program for QSB_MAX_READS and QSB_MAX_WRITES and the
source and destination resource counts are updated to be correct for
all versions through v4.5 as well.
Note that IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
already reflect that 5 is an acceptable number of resources (which
IPA v4.5 implements).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPA v4.5 adds a few fields to the endpoint header and extended
header configuration registers that represent new high-order bits
for certain offsets and sizes. Add code to incorporate these upper
bits into the registers for IPA v4.5.
This includes creating ipa_header_size_encoded(), which handles
encoding the metadata offset field for use in the ENDP_INIT_HDR
register in a way appropriate for the hardware version. This and
ipa_metadata_offset_encoded() ensure the mask argument passed to
u32_encode_bits() is constant.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
