Commit Graph

10419 Commits

Author SHA1 Message Date
Glauber Costa
11c6bffa42 KVM: x86: change msr numbers for kvmclock
Avi pointed out a while ago that those MSRs falls into the pentium
PMU range. So the idea here is to add new ones, and after a while,
deprecate the old ones.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:01 +03:00
Glauber Costa
489fb490db x86, paravirt: Add a global synchronization point for pvclock
In recent stress tests, it was found that pvclock-based systems
could seriously warp in smp systems. Using ingo's time-warp-test.c,
I could trigger a scenario as bad as 1.5mi warps a minute in some systems.
(to be fair, it wasn't that bad in most of them). Investigating further, I
found out that such warps were caused by the very offset-based calculation
pvclock is based on.

This happens even on some machines that report constant_tsc in its tsc flags,
specially on multi-socket ones.

Two reads of the same kernel timestamp at approx the same time, will likely
have tsc timestamped in different occasions too. This means the delta we
calculate is unpredictable at best, and can probably be smaller in a cpu
that is legitimately reading clock in a forward ocasion.

Some adjustments on the host could make this window less likely to happen,
but still, it pretty much poses as an intrinsic problem of the mechanism.

A while ago, I though about using a shared variable anyway, to hold clock
last state, but gave up due to the high contention locking was likely
to introduce, possibly rendering the thing useless on big machines. I argue,
however, that locking is not necessary.

We do a read-and-return sequence in pvclock, and between read and return,
the global value can have changed. However, it can only have changed
by means of an addition of a positive value. So if we detected that our
clock timestamp is less than the current global, we know that we need to
return a higher one, even though it is not exactly the one we compared to.

OTOH, if we detect we're greater than the current time source, we atomically
replace the value with our new readings. This do causes contention on big
boxes (but big here means *BIG*), but it seems like a good trade off, since
it provide us with a time source guaranteed to be stable wrt time warps.

After this patch is applied, I don't see a single warp in time during 5 days
of execution, in any of the machines I saw them before.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
CC: Avi Kivity <avi@redhat.com>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:41:00 +03:00
Glauber Costa
424c32f1aa x86, paravirt: Enable pvclock flags in vcpu_time_info structure
This patch removes one padding byte and transform it into a flags
field. New versions of guests using pvclock will query these flags
upon each read.

Flags, however, will only be interpreted when the guest decides to.
It uses the pvclock_valid_flags function to signal that a specific
set of flags should be taken into consideration. Which flags are valid
are usually devised via HV negotiation.

Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:40:59 +03:00
Roedel, Joerg
b69e8caef5 KVM: x86: Inject #GP with the right rip on efer writes
This patch fixes a bug in the KVM efer-msr write path. If a
guest writes to a reserved efer bit the set_efer function
injects the #GP directly. The architecture dependent wrmsr
function does not see this, assumes success and advances the
rip. This results in a #GP in the guest with the wrong rip.
This patch fixes this by reporting efer write errors back to
the architectural wrmsr function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:39 +03:00
Joerg Roedel
0d945bd935 KVM: SVM: Don't allow nested guest to VMMCALL into host
This patch disables the possibility for a l2-guest to do a
VMMCALL directly into the host. This would happen if the
l1-hypervisor doesn't intercept VMMCALL and the l2-guest
executes this instruction.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:38 +03:00
Joerg Roedel
3f0fd2927b KVM: x86: Fix exception reinjection forced to true
The patch merged recently which allowed to mark an exception
as reinjected has a bug as it always marks the exception as
reinjected. This breaks nested-svm shadow-on-shadow
implementation.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:37 +03:00
Avi Kivity
9ed3c444ab KVM: Fix wallclock version writing race
Wallclock writing uses an unprotected global variable to hold the version;
this can cause one guest to interfere with another if both write their
wallclock at the same time.

Acked-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:36 +03:00
Avi Kivity
8facbbff07 KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
On svm, kvm_read_pdptr() may require reading guest memory, which can sleep.

Push the spinlock into mmu_alloc_roots(), and only take it after we've read
the pdptr.

Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:35 +03:00
Shane Wang
cafd66595d KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
Per document, for feature control MSR:

  Bit 1 enables VMXON in SMX operation. If the bit is clear, execution
        of VMXON in SMX operation causes a general-protection exception.
  Bit 2 enables VMXON outside SMX operation. If the bit is clear, execution
        of VMXON outside SMX operation causes a general-protection exception.

This patch is to enable this kind of check with SMX for VMXON in KVM.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:34 +03:00
Marcelo Tosatti
f1d86e469b KVM: x86: properly update ready_for_interrupt_injection
The recent changes to emulate string instructions without entering guest
mode exposed a bug where pending interrupts are not properly reflected
in ready_for_interrupt_injection.

The result is that userspace overwrites a previously queued interrupt,
when irqchip's are emulated in userspace.

Fix by always updating state before returning to userspace.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:33 +03:00
Avi Kivity
84ad33ef5d KVM: VMX: Atomically switch efer if EPT && !EFER.NX
When EPT is enabled, we cannot emulate EFER.NX=0 through the shadow page
tables.  This causes accesses through ptes with bit 63 set to succeed instead
of failing a reserved bit check.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:32 +03:00
Avi Kivity
61d2ef2ce3 KVM: VMX: Add facility to atomically switch MSRs on guest entry/exit
Some guest msr values cannot be used on the host (for example. EFER.NX=0),
so we need to switch them atomically during guest entry or exit.

Add a facility to program the vmx msr autoload registers accordingly.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:31 +03:00
Avi Kivity
5dfa3d170e KVM: VMX: Add definitions for guest and host EFER autoswitch vmcs entries
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:31 +03:00
Avi Kivity
19b95dba03 KVM: VMX: Add definition for msr autoload entry
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:30 +03:00
Avi Kivity
0ee75bead8 KVM: Let vcpu structure alignment be determined at runtime
vmx and svm vcpus have different contents and therefore may have different
alignmment requirements.  Let each specify its required alignment.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-19 11:36:29 +03:00
Xiao Guangrong
884a0ff0b6 KVM: MMU: cleanup invlpg code
Using is_last_spte() to cleanup invlpg code

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:36:28 +03:00
Xiao Guangrong
5e1b3ddbf2 KVM: MMU: move unsync/sync tracpoints to proper place
Move unsync/sync tracepoints to the proper place, it's good
for us to obtain unsync page live time

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:36:27 +03:00
Xiao Guangrong
85f2067c31 KVM: MMU: convert mmu tracepoints
Convert mmu tracepoints by using DECLARE_EVENT_CLASS

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:36:26 +03:00
Xiao Guangrong
22c9b2d166 KVM: MMU: fix for calculating gpa in invlpg code
If the guest is 32-bit, we should use 'quadrant' to adjust gpa
offset

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:36:25 +03:00
Gui Jianfeng
d35b8dd935 KVM: Fix mmu shrinker error
kvm_mmu_remove_one_alloc_mmu_page() assumes kvm_mmu_zap_page() only reclaims
only one sp, but that's not the case. This will cause mmu shrinker returns
a wrong number. This patch fix the counting error.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:36:23 +03:00
Eric Northup
5a7388c2d2 KVM: MMU: fix hashing for TDP and non-paging modes
For TDP mode, avoid creating multiple page table roots for the single
guest-to-host physical address map by fixing the inputs used for the
shadow page table hash in mmu_alloc_roots().

Signed-off-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-19 11:36:22 +03:00
Gui Jianfeng
df2fb6e710 KVM: MMU: fix sp->unsync type error in trace event definition
sp->unsync is bool now, so update trace event declaration.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:19:29 +03:00
Joerg Roedel
ff47a49b23 KVM: SVM: Handle MCE intercepts always on host level
This patch prevents MCE intercepts from being propagated
into the L1 guest if they happened in an L2 guest.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:27 +03:00
Joerg Roedel
ce7ddec4bb KVM: x86: Allow marking an exception as reinjected
This patch adds logic to kvm/x86 which allows to mark an
injected exception as reinjected. This allows to remove an
ugly hack from svm_complete_interrupts that prevented
exceptions from being reinjected at all in the nested case.
The hack was necessary because an reinjected exception into
the nested guest could cause a nested vmexit emulation. But
reinjected exceptions must not intercept. The downside of
the hack is that a exception that in injected could get
lost.
This patch fixes the problem and puts the code for it into
generic x86 files because. Nested-VMX will likely have the
same problem and could reuse the code.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:26 +03:00
Joerg Roedel
c2c63a4939 KVM: SVM: Report emulated SVM features to userspace
This patch implements the reporting of the emulated SVM
features to userspace instead of the real hardware
capabilities. Every real hardware capability needs emulation
in nested svm so the old behavior was broken.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:24 +03:00
Joerg Roedel
d4330ef2fb KVM: x86: Add callback to let modules decide over some supported cpuid bits
This patch adds the get_supported_cpuid callback to
kvm_x86_ops. It will be used in do_cpuid_ent to delegate the
decission about some supported cpuid bits to the
architecture modules.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:23 +03:00
Joerg Roedel
228070b1b3 KVM: SVM: Propagate nested entry failure into guest hypervisor
This patch implements propagation of a failes guest vmrun
back into the guest instead of killing the whole guest.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:21 +03:00
Joerg Roedel
2be4fc7a02 KVM: SVM: Sync cr0 and cr3 to kvm state before nested handling
This patch syncs cr0 and cr3 from the vmcb to the kvm state
before nested intercept handling is done. This allows to
simplify the vmexit path.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:20 +03:00
Joerg Roedel
2041a06a50 KVM: SVM: Make sure rip is synced to vmcb before nested vmexit
This patch fixes a bug where a nested guest always went over
the same instruction because the rip was not advanced on a
nested vmexit.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:18 +03:00
Joerg Roedel
924584ccb0 KVM: SVM: Fix nested nmi handling
The patch introducing nested nmi handling had a bug. The
check does not belong to enable_nmi_window but must be in
nmi_allowed. This patch fixes this.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:17 +03:00
Avi Kivity
8d3b932309 Merge remote branch 'tip/perf/core'
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:15 +03:00
Lai Jiangshan
cdbecfc398 KVM: VMX: free vpid when fail to create vcpu
Fix bug of the exception path, free allocated vpid when fail
to create vcpu.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:19:10 +03:00
Wei Yongjun
77a1a71570 KVM: MMU: cleanup for function unaccount_shadowed()
Since gfn is not changed in the for loop, we do not need to call
gfn_to_memslot_unaliased() under the loop, and it is safe to move
it out.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:12 +03:00
Gui Jianfeng
2a059bf444 KVM: Get rid of dead function gva_to_page()
Nobody use gva_to_page() anymore, get rid of it.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:10 +03:00
Gui Jianfeng
b2fc15a5ef KVM: MMU: Remove unused varialbe in rmap_next()
Remove unused varialbe in rmap_next()

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:09 +03:00
Gui Jianfeng
814a59d207 KVM: MMU: Make use of is_large_pte() in walker
Make use of is_large_pte() instead of checking PT_PAGE_SIZE_MASK
bit directly.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:07 +03:00
Gui Jianfeng
51fb60d81b KVM: MMU: Move sync_page() first pte address calculation out of loop
Move first pte address calculation out of loop to save some cycles.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:06 +03:00
Avi Kivity
87bc3bf972 KVM: MMU: Drop cr4.pge from shadow page role
Since commit bf47a760f6, we no longer handle ptes with the global bit
set specially, so there is no reason to distinguish between shadow pages
created with cr4.gpe set and clear.

Such tracking is expensive when the guest toggles cr4.pge, so drop it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:03 +03:00
Lai Jiangshan
90d83dc3d4 KVM: use the correct RCU API for PROVE_RCU=y
The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:01 +03:00
Avi Kivity
9beeaa2d68 Merge branch 'perf'
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:17:58 +03:00
Xiao Guangrong
3246af0ece KVM: MMU: cleanup for hlist walk restart
Quote from Avi:

|Just change the assignment to a 'goto restart;' please,
|I don't like playing with list_for_each internals.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:56 +03:00
Gleb Natapov
acb5451789 KVM: prevent spurious exit to userspace during task switch emulation.
If kvm_task_switch() fails code exits to userspace without specifying
exit reason, so the previous exit reason is reused by userspace. Fix
this by specifying exit reason correctly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:55 +03:00
Xiao Guangrong
6b18493d60 KVM: MMU: remove unused parameter in mmu_parent_walk()
'vcpu' is unused, remove it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:53 +03:00
Xiao Guangrong
0571d366e0 KVM: MMU: reduce 'struct kvm_mmu_page' size
Define 'multimapped' as 'bool'.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:52 +03:00
Xiao Guangrong
1b8c7934a4 KVM: MMU: remove unused struct kvm_unsync_walk
Remove 'struct kvm_unsync_walk' since it's not used.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:50 +03:00
Gleb Natapov
19d0443726 KVM: fix emulator_task_switch() return value.
emulator_task_switch() should return -1 for failure and 0 for success to
the caller, just like x86_emulate_insn() does.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:49 +03:00
Avi Kivity
5b7e0102ae KVM: MMU: Replace role.glevels with role.cr4_pae
There is no real distinction between glevels=3 and glevels=4; both have
exactly the same format and the code is treated exactly the same way.  Drop
role.glevels and replace is with role.cr4_pae (which is meaningful).  This
simplifies the code a bit.

As a side effect, it allows sharing shadow page tables between pae and
longmode guest page tables at the same guest page.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:47 +03:00
Jan Kiszka
e269fb2189 KVM: x86: Push potential exception error code on task switches
When a fault triggers a task switch, the error code, if existent, has to
be pushed on the new task's stack. Implement the missing bits.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:46 +03:00
Jan Kiszka
0760d44868 KVM: x86: Terminate early if task_switch_16/32 failed
Stop the switch immediately if task_switch_16/32 returned an error. Only
if that step succeeded, the switch should actually take place and update
any register states.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:44 +03:00
Gleb Natapov
8f6abd06f5 KVM: x86: get rid of mmu_only parameter in emulator_write_emulated()
We can call kvm_mmu_pte_write() directly from
emulator_cmpxchg_emulated() instead of passing mmu_only down to
emulator_write_emulated_onepage() and call it there.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17 12:17:43 +03:00