cpumask_parse() finds first occurrence of either or strchr() and
strlen(). We can do it better with a single call of strchrnul().
[akpm@linux-foundation.org: remove unneeded cast]
Link: http://lkml.kernel.org/r/20190409204208.12190-1-ynorov@marvell.com
Signed-off-by: Yury Norov <ynorov@marvell.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test that trivially recursing script onto itself doesn't work.
Note: this is different test from ELOOP tests in execveat.c Those test
that execveat(2) doesn't follow symlinks when told to do so.
Link: http://lkml.kernel.org/r/20190423192720.GA21433@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct linux_binprm::buf is the first field and it is exactly 128 bytes
in size. It means that on x86_64 all accesses to other fields will go
though [r64 + disp32] addressing mode which is 3 bytes bloatier than
[r64 + disp8] addressing mode. Given that accesses to other fields
outnumber accesses to ->buf, move it down.
Space savings (x86_64 defconfig):
more on distro configs because LSMs actively dereference "bprm"
but do not care about first 128 bytes of the executable itself.
add/remove: 0/0 grow/shrink: 0/24 up/down: 0/-492 (-492)
Function old new delta
selinux_bprm_committing_creds 552 549 -3
finalize_exec 94 91 -3
__audit_log_bprm_fcaps 283 280 -3
__audit_bprm 39 36 -3
perf_trace_sched_process_exec 347 341 -6
install_exec_creds 105 99 -6
cap_bprm_set_creds.cold 60 54 -6
would_dump 137 128 -9
load_script 637 628 -9
bprm_change_interp 61 52 -9
trace_event_raw_event_sched_process_exec 260 250 -10
search_binary_handler 255 240 -15
remove_arg_zero 295 277 -18
free_bprm 119 101 -18
prepare_binprm 379 360 -19
setup_new_exec 336 315 -21
flush_old_exec 1638 1617 -21
copy_strings.isra 746 724 -22
setup_arg_pages 559 530 -29
load_misc_binary 1151 1118 -33
selinux_bprm_set_creds 792 753 -39
load_elf_binary 11111 11072 -39
cap_bprm_set_creds 1496 1454 -42
__do_execve_file.isra 2395 2286 -109
Link: http://lkml.kernel.org/r/20190421165025.GA26843@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->recursion_depth is changed only by current, therefore decrementing can
be done without taking any locks.
Link: http://lkml.kernel.org/r/20190417213150.GA26474@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and this
place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/signal.c:795:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
Link: http://lkml.kernel.org/r/20190114203505.17875-1-malat@debian.org
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later. In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.
Also bail out early when any stage of fsync fails.
Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
csum_partial() gives different results for little-endian and big-endian
hosts. This causes images created on little-endian hosts and mounted on
big endian hosts to see csum mismatches. This causes an endianness bug.
Sparse gives a warning as csum_partial returns a restricted integer type
__wsum_t and xattr_hash expects __u32. This warning acts as a reminder
for this bug and should not be suppressed.
This comment aims to convey these endianness issues.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190423161831.GA15387@bharath12345-Inspiron-5559
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a description of the "ignore" pseudo mount option that can be used
to provide a generic indicator to applications that the mount entry
should be ignored when displaying mount information.
Link: http://lkml.kernel.org/r/155287084617.12593.812733161112154904.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Describe AUTOFS_EXP_FORCED in addition to AUTOFS_EXP_IMMEDIATE in the
description of the AUTOFS_DEV_IOCTL_EXPIRE_CMD ioctl.
Link: http://lkml.kernel.org/r/155287084078.12593.15000931045413195778.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the description of AUTOFS_EXP_LEAVES to cover its possible future
use with amd format mount maps.
Link: http://lkml.kernel.org/r/155287083538.12593.18163159677020718048.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A "strictexpire" mount option has been added to the autofs file system.
It is meant to be used in cases where a GUI continually accesses or an
application frquently scans an automount directory tree causing an
accumulation of otherwise unused mounts.
Link: http://lkml.kernel.org/r/155287083000.12593.2722713092537666885.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter a few word usages in Documentation/filesystems/autofs.txt and
correct some spelling mistakes.
Link: http://lkml.kernel.org/r/155287082394.12593.6506084453911662450.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_DEBUG_KERNEL should not impact code generation. Use the newly
defined CONFIG_DEBUG_MISC instead to keep the current code.
Link: http://lkml.kernel.org/r/20190413224438.10802-6-okaya@kernel.org
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Chris Zankel <chris@zankel.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_DEBUG_KERNEL should not impact code generation. Use the newly
defined CONFIG_DEBUG_MISC instead to keep the current code.
Link: http://lkml.kernel.org/r/20190413224438.10802-5-okaya@kernel.org
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_DEBUG_KERNEL should not impact code generation. Use the newly
defined CONFIG_DEBUG_MISC instead to keep the current code.
Link: http://lkml.kernel.org/r/20190413224438.10802-3-okaya@kernel.org
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "init: Do not select DEBUG_KERNEL by default", v5.
CONFIG_DEBUG_KERNEL has been designed to just enable Kconfig options.
Kernel code generatoin should not depend on CONFIG_DEBUG_KERNEL.
Proposed alternative plan: let's add a new symbol, something like
DEBUG_MISC ("Miscellaneous debug code that should be under a more
specific debug option but isn't"), make it depend on DEBUG_KERNEL and be
"default DEBUG_KERNEL" but allow itself to be turned off, and then
mechanically change the small handful of "#ifdef CONFIG_DEBUG_KERNEL" to
"#ifdef CONFIG_DEBUG_MISC".
This patch (of 5):
Introduce DEBUG_MISC ("Miscellaneous debug code that should be under a
more specific debug option but isn't"), make it depend on DEBUG_KERNEL
and be "default DEBUG_KERNEL" but allow itself to be turned off, and
then mechanically change the small handful of "#ifdef
CONFIG_DEBUG_KERNEL" to "#ifdef CONFIG_DEBUG_MISC".
Link: http://lkml.kernel.org/r/20190413224438.10802-2-okaya@kernel.org
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commmit eab09532d4 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE"),
made changes in the rare case when the ELF loader was directly invoked
(e.g to set a non-inheritable LD_LIBRARY_PATH, testing new versions of
the loader), by moving into the mmap region to avoid both ET_EXEC and
PIE binaries. This had the effect of also moving the brk region into
mmap, which could lead to the stack and brk being arbitrarily close to
each other. An unlucky process wouldn't get its requested stack size
and stack allocations could end up scribbling on the heap.
This is illustrated here. In the case of using the loader directly, brk
(so helpfully identified as "[heap]") is allocated with the _loader_ not
the binary. For example, with ASLR entirely disabled, you can see this
more clearly:
$ /bin/cat /proc/self/maps
555555554000-55555555c000 r-xp 00000000 ... /bin/cat
55555575b000-55555575c000 r--p 00007000 ... /bin/cat
55555575c000-55555575d000 rw-p 00008000 ... /bin/cat
55555575d000-55555577e000 rw-p 00000000 ... [heap]
...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 ...
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]
$ /lib/x86_64-linux-gnu/ld-2.27.so /bin/cat /proc/self/maps
...
7ffff7bcc000-7ffff7bd4000 r-xp 00000000 ... /bin/cat
7ffff7bd4000-7ffff7dd3000 ---p 00008000 ... /bin/cat
7ffff7dd3000-7ffff7dd4000 r--p 00007000 ... /bin/cat
7ffff7dd4000-7ffff7dd5000 rw-p 00008000 ... /bin/cat
7ffff7dd5000-7ffff7dfc000 r-xp 00000000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7fb2000-7ffff7fd6000 rw-p 00000000 ...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff8020000 rw-p 00000000 ... [heap]
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]
The solution is to move brk out of mmap and into ELF_ET_DYN_BASE since
nothing is there in the direct loader case (and ET_EXEC is still far
away at 0x400000). Anything that ran before should still work (i.e.
the ultimately-launched binary already had the brk very far from its
text, so this should be no different from a COMPAT_BRK standpoint). The
only risk I see here is that if someone started to suddenly depend on
the entire memory space lower than the mmap region being available when
launching binaries via a direct loader execs which seems highly
unlikely, I'd hope: this would mean a binary would _not_ work when
exec()ed normally.
(Note that this is only done under CONFIG_ARCH_HAS_ELF_RANDOMIZATION
when randomization is turned on.)
Link: http://lkml.kernel.org/r/20190422225727.GA21011@beast
Link: https://lkml.kernel.org/r/CAGXu5jJ5sj3emOT2QPxQkNQk0qbU6zEfu9=Omfhx_p0nCKPSjA@mail.gmail.com
Fixes: eab09532d4 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Ali Saidi <alisaidi@amazon.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get "current_pt_regs" pointer right before usage.
Space savings on x86_64:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-180 (-180)
Function old new delta
load_elf_binary 5806 5626 -180 !!!
Looks like the compiler doesn't know that "current_pt_regs" is stable
pointer (because it doesn't know ->stack isn't) even though it knows
that "current" is stable pointer. So it saves it in the very beginning
and then tries to carry it through a lot of code.
Here is what happens here:
load_elf_binary()
...
mov rax,QWORD PTR gs:0x14c00
mov r13,QWORD PTR [rax+0x18] r13 = current->stack
call kmem_cache_alloc # first kmalloc
[980 bytes later!]
# let's spill that sucker because we need a register
# for "load_bias" calculations at
#
# if (interpreter) {
# load_bias = ELF_ET_DYN_BASE;
# if (current->flags & PF_RANDOMIZE)
# load_bias += arch_mmap_rnd();
# elf_flags |= elf_fixed;
# }
mov QWORD PTR [rsp+0x68],r13
If this is not _the_ root cause it is still eeeeh.
After the patch things become much simpler:
mov rax, QWORD PTR gs:0x14c00 # current
mov rdx, QWORD PTR [rax+0x18] # current->stack
movq [rdx+0x3fb8], 0 # fill pt_regs
...
call finalize_exec
Link: http://lkml.kernel.org/r/20190419200343.GA19788@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two places where mapping protections are calculated: one for
executable, another one for interpreter -- take them out.
ELF read and execute permissions are interchanged with Linux PROT_READ
and PROT_EXEC, microoptimizations are welcome!
Link: http://lkml.kernel.org/r/20190417213413.GB26474@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no reason for PT_INTERP filename to linger till the end of the
whole loading process.
Link: http://lkml.kernel.org/r/20190314204953.GD18143@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Nikitas Angelinas <nikitas.angelinas@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mukesh Ojha <mojha@codeaurora.org>
[nikitas.angelinas@gmail.com: fix GPF when dereferencing invalid interpreter]
Link: http://lkml.kernel.org/r/20190330140032.GA1527@vostro
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Local 'ret' is unneeded and was poorly named: the variable `ret'
generally means the "the value which this function will return".
Cc: Roman Gushchin <guro@fb.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ror32 implementation (word >> shift) | (word << (32 - shift) has
undefined behaviour if shift is outside the [1, 31] range. Similarly
for the 64 bit variants. Most callers pass a compile-time constant
(naturally in that range), but there's an UBSAN report that these may
actually be called with a shift count of 0.
Instead of special-casing that, we can make them DTRT for all values of
shift while also avoiding UB. For some reason, this was already partly
done for rol32 (which was well-defined for [0, 31]). gcc 8 recognizes
these patterns as rotates, so for example
__u32 rol32(__u32 word, unsigned int shift)
{
return (word << (shift & 31)) | (word >> ((-shift) & 31));
}
compiles to
0000000000000020 <rol32>:
20: 89 f8 mov %edi,%eax
22: 89 f1 mov %esi,%ecx
24: d3 c0 rol %cl,%eax
26: c3 retq
Older compilers unfortunately do not do as well, but this only affects
the small minority of users that don't pass constants.
Due to integer promotions, ro[lr]8 were already well-defined for shifts
in [0, 8], and ro[lr]16 were mostly well-defined for shifts in [0, 16]
(only mostly - u16 gets promoted to _signed_ int, so if bit 15 is set,
word << 16 is undefined). For consistency, update those as well.
Link: http://lkml.kernel.org/r/20190410211906.2190-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "lib: rework bitmap_parselist and tests", v5.
bitmap_parselist has been evolved from a pretty simple idea for long and
now lacks for refactoring. It is not structured, has nested loops and a
set of opaque-named variables.
Things are more complicated because bitmap_parselist() is a part of user
interface, and its behavior should not change.
In this patchset
- bitmap_parselist_user() made a wrapper on bitmap_parselist();
- bitmap_parselist() reworked (patch 2);
- time measurement in test_bitmap_parselist switched to ktime_get
(patch 3);
- new tests introduced (patch 4), and
- bitmap_parselist_user() testing enabled with the same testset as
bitmap_parselist() (patch 5).
This patch (of 5):
Currently we parse user data byte after byte which leads to
overcomplification of parsing algorithm. The only user of
bitmap_parselist_user() is not performance-critical, and so we can
duplicate user data to kernel buffer and simply call bitmap_parselist().
This rework lets us unify and simplify bitmap_parselist() and
bitmap_parselist_user(), which is done in the following patch.
Link: http://lkml.kernel.org/r/20190405173211.11373-2-ynorov@marvell.com
Signed-off-by: Yury Norov <ynorov@marvell.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Mike Travis <travis@sgi.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The integer exponentiation is used in few places and might be used in
the future by other call sites. Move it to wider use.
Link: http://lkml.kernel.org/r/20190323172531.80025-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For better maintenance and expansion move the mathematic helpers to the
separate folder.
No functional change intended.
Note, the int_sqrt() is not used as a part of lib, so, moved to regular
obj.
Link: http://lkml.kernel.org/r/20190323172531.80025-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Ray Jui <rjui@broadcom.com>
[mchehab+samsung@kernel.org: fix broken doc references for div64.c and gcd.c]
Link: http://lkml.kernel.org/r/734f49bae5d4052b3c25691dfefad59bea2e5843.1555580999.git.mchehab+samsung@kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_RETPOLINE has severely degraded indirect function call
performance, so it's worth putting some effort into reducing the number
of times cmp() is called.
This patch avoids badly unbalanced merges on unlucky input sizes. It
slightly increases the code size, but saves an average of 0.2*n calls to
cmp().
x86-64 code size 739 -> 803 bytes (+64)
Unfortunately, there's not a lot of low-hanging fruit in a merge sort;
it already performs only n*log2(n) - K*n + O(1) compares. The leading
coefficient is already at the theoretical limit (log2(n!) corresponds to
K=1.4427), so we're fighting over the linear term, and the best
mergesort can do is K=1.2645, achieved when n is a power of 2.
The differences between mergesort variants appear when n is *not* a
power of 2; K is a function of the fractional part of log2(n). Top-down
mergesort does best of all, achieving a minimum K=1.2408, and an average
(over all sizes) K=1.248. However, that requires knowing the number of
entries to be sorted ahead of time, and making a full pass over the
input to count it conflicts with a second performance goal, which is
cache blocking.
Obviously, we have to read the entire list into L1 cache at some point,
and performance is best if it fits. But if it doesn't fit, each full
pass over the input causes a cache miss per element, which is
undesirable.
While textbooks explain bottom-up mergesort as a succession of merging
passes, practical implementations do merging in depth-first order: as
soon as two lists of the same size are available, they are merged. This
allows as many merge passes as possible to fit into L1; only the final
few merges force cache misses.
This cache-friendly depth-first merge order depends on us merging the
beginning of the input as much as possible before we've even seen the
end of the input (and thus know its size).
The simple eager merge pattern causes bad performance when n is just
over a power of 2. If n=1028, the final merge is between 1024- and
4-element lists, which is wasteful of comparisons. (This is actually
worse on average than n=1025, because a 1204:1 merge will, on average,
end after 512 compares, while 1024:4 will walk 4/5 of the list.)
Because of this, bottom-up mergesort achieves K < 0.5 for such sizes,
and has an average (over all sizes) K of around 1. (My experiments show
K=1.01, while theory predicts K=0.965.)
There are "worst-case optimal" variants of bottom-up mergesort which
avoid this bad performance, but the algorithms given in the literature,
such as queue-mergesort and boustrodephonic mergesort, depend on the
breadth-first multi-pass structure that we are trying to avoid.
This implementation is as eager as possible while ensuring that all
merge passes are at worst 1:2 unbalanced. This achieves the same
average K=1.207 as queue-mergesort, which is 0.2*n better then
bottom-up, and only 0.04*n behind top-down mergesort.
Specifically, defers merging two lists of size 2^k until it is known
that there are 2^k additional inputs following. This ensures that the
final uneven merges triggered by reaching the end of the input will be
at worst 2:1. This will avoid cache misses as long as 3*2^k elements
fit into the cache.
(I confess to being more than a little bit proud of how clean this code
turned out. It took a lot of thinking, but the resultant inner loop is
very simple and efficient.)
Refs:
Bottom-up Mergesort: A Detailed Analysis
Wolfgang Panny, Helmut Prodinger
Algorithmica 14(4):340--354, October 1995
https://doi.org/10.1007/BF01294131https://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.6.5260
The cost distribution of queue-mergesort, optimal mergesorts, and
power-of-two rules
Wei-Mei Chen, Hsien-Kuei Hwang, Gen-Huey Chen
Journal of Algorithms 30(2); Pages 423--448, February 1999
https://doi.org/10.1006/jagm.1998.0986https://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.4.5380
Queue-Mergesort
Mordecai J. Golin, Robert Sedgewick
Information Processing Letters, 48(5):253--259, 10 December 1993
https://doi.org/10.1016/0020-0190(93)90088-qhttps://sci-hub.tw/10.1016/0020-0190(93)90088-Q
Feedback from Rasmus Villemoes <linux@rasmusvillemoes.dk>.
Link: http://lkml.kernel.org/r/fd560853cc4dca0d0f02184ffa888b4c1be89abc.1552704200.git.lkml@sdf.org
Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Andrey Abramov <st5pub@yandex.ru>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Daniel Wagner <daniel.wagner@siemens.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than a fixed-size array of pending sorted runs, use the ->prev
links to keep track of things. This reduces stack usage, eliminates
some ugly overflow handling, and reduces the code size.
Also:
* merge() no longer needs to handle NULL inputs, so simplify.
* The same applies to merge_and_restore_back_links(), which is renamed
to the less ponderous merge_final(). (It's a static helper function,
so we don't need a super-descriptive name; comments will do.)
* Document the actual return value requirements on the (*cmp)()
function; some callers are already using this feature.
x86-64 code size 1086 -> 739 bytes (-347)
(Yes, I see checkpatch complaining about no space after comma in
"__attribute__((nonnull(2,3,4,5)))". Checkpatch is wrong.)
Feedback from Rasmus Villemoes, Andy Shevchenko and Geert Uytterhoeven.
[akpm@linux-foundation.org: remove __pure usage due to mysterious warning]
Link: http://lkml.kernel.org/r/f63c410e0ff76009c9b58e01027e751ff7fdb749.1552704200.git.lkml@sdf.org
Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Andrey Abramov <st5pub@yandex.ru>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Daniel Wagner <daniel.wagner@siemens.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to what's being done in the net code, this takes advantage of
the fact that most invocations use only a few common swap functions, and
replaces indirect calls to them with (highly predictable) conditional
branches. (The downside, of course, is that if you *do* use a custom
swap function, there are a few extra predicted branches on the code
path.)
This actually *shrinks* the x86-64 code, because it inlines the various
swap functions inside do_swap, eliding function prologues & epilogues.
x86-64 code size 767 -> 703 bytes (-64)
Link: http://lkml.kernel.org/r/d10c5d4b393a1847f32f5b26f4bbaa2857140e1e.1552704200.git.lkml@sdf.org
Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Andrey Abramov <st5pub@yandex.ru>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Daniel Wagner <daniel.wagner@siemens.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This uses fewer comparisons than the previous code (approaching half as
many for large random inputs), but produces identical results; it
actually performs the exact same series of swap operations.
Specifically, it reduces the average number of compares from
2*n*log2(n) - 3*n + o(n)
to
n*log2(n) + 0.37*n + o(n).
This is still 1.63*n worse than glibc qsort() which manages n*log2(n) -
1.26*n, but at least the leading coefficient is correct.
Standard heapsort, when sifting down, performs two comparisons per
level: one to find the greater child, and a second to see if the current
node should be exchanged with that child.
Bottom-up heapsort observes that it's better to postpone the second
comparison and search for the leaf where -infinity would be sent to,
then search back *up* for the current node's destination.
Since sifting down usually proceeds to the leaf level (that's where half
the nodes are), this does O(1) second comparisons rather than log2(n).
That saves a lot of (expensive since Spectre) indirect function calls.
The one time it's worse than the previous code is if there are large
numbers of duplicate keys, when the top-down algorithm is O(n) and
bottom-up is O(n log n). For distinct keys, it's provably always
better, doing 1.5*n*log2(n) + O(n) in the worst case.
(The code is not significantly more complex. This patch also merges the
heap-building and -extracting sift-down loops, resulting in a net code
size savings.)
x86-64 code size 885 -> 767 bytes (-118)
(I see the checkpatch complaint about "else if (n -= size)". The
alternative is significantly uglier.)
Link: http://lkml.kernel.org/r/2de8348635a1a421a72620677898c7fd5bd4b19d.1552704200.git.lkml@sdf.org
Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Andrey Abramov <st5pub@yandex.ru>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Daniel Wagner <daniel.wagner@siemens.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "lib/sort & lib/list_sort: faster and smaller", v2.
Because CONFIG_RETPOLINE has made indirect calls much more expensive, I
thought I'd try to reduce the number made by the library sort functions.
The first three patches apply to lib/sort.c.
Patch #1 is a simple optimization. The built-in swap has special cases
for aligned 4- and 8-byte objects. But those are almost never used;
most calls to sort() work on larger structures, which fall back to the
byte-at-a-time loop. This generalizes them to aligned *multiples* of 4
and 8 bytes. (If nothing else, it saves an awful lot of energy by not
thrashing the store buffers as much.)
Patch #2 grabs a juicy piece of low-hanging fruit. I agree that nice
simple solid heapsort is preferable to more complex algorithms (sorry,
Andrey), but it's possible to implement heapsort with far fewer
comparisons (50% asymptotically, 25-40% reduction for realistic sizes)
than the way it's been done up to now. And with some care, the code
ends up smaller, as well. This is the "big win" patch.
Patch #3 adds the same sort of indirect call bypass that has been added
to the net code of late. The great majority of the callers use the
builtin swap functions, so replace the indirect call to sort_func with a
(highly preditable) series of if() statements. Rather surprisingly,
this decreased code size, as the swap functions were inlined and their
prologue & epilogue code eliminated.
lib/list_sort.c is a bit trickier, as merge sort is already close to
optimal, and we don't want to introduce triumphs of theory over
practicality like the Ford-Johnson merge-insertion sort.
Patch #4, without changing the algorithm, chops 32% off the code size
and removes the part[MAX_LIST_LENGTH+1] pointer array (and the
corresponding upper limit on efficiently sortable input size).
Patch #5 improves the algorithm. The previous code is already optimal
for power-of-two (or slightly smaller) size inputs, but when the input
size is just over a power of 2, there's a very unbalanced final merge.
There are, in the literature, several algorithms which solve this, but
they all depend on the "breadth-first" merge order which was replaced by
commit 835cc0c847 with a more cache-friendly "depth-first" order.
Some hard thinking came up with a depth-first algorithm which defers
merges as little as possible while avoiding bad merges. This saves
0.2*n compares, averaged over all sizes.
The code size increase is minimal (64 bytes on x86-64, reducing the net
savings to 26%), but the comments expanded significantly to document the
clever algorithm.
TESTING NOTES: I have some ugly user-space benchmarking code which I
used for testing before moving this code into the kernel. Shout if you
want a copy.
I'm running this code right now, with CONFIG_TEST_SORT and
CONFIG_TEST_LIST_SORT, but I confess I haven't rebooted since the last
round of minor edits to quell checkpatch. I figure there will be at
least one round of comments and final testing.
This patch (of 5):
Rather than having special-case swap functions for 4- and 8-byte
objects, special-case aligned multiples of 4 or 8 bytes. This speeds up
most users of sort() by avoiding fallback to the byte copy loop.
Despite what ca96ab859a ("lib/sort: Add 64 bit swap function") claims,
very few users of sort() sort pointers (or pointer-sized objects); most
sort structures containing at least two words. (E.g.
drivers/acpi/fan.c:acpi_fan_get_fps() sorts an array of 40-byte struct
acpi_fan_fps.)
The functions also got renamed to reflect the fact that they support
multiple words. In the great tradition of bikeshedding, the names were
by far the most contentious issue during review of this patch series.
x86-64 code size 872 -> 886 bytes (+14)
With feedback from Andy Shevchenko, Rasmus Villemoes and Geert
Uytterhoeven.
Link: http://lkml.kernel.org/r/f24f932df3a7fa1973c1084154f1cea596bcf341.1552704200.git.lkml@sdf.org
Signed-off-by: George Spelvin <lkml@sdf.org>
Acked-by: Andrey Abramov <st5pub@yandex.ru>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Daniel Wagner <daniel.wagner@siemens.com>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a lot more appropriate than PI_LIST, which in the kernel one
would assume that it has to do with priority-inheritance; which is not
-- furthermore futexes make use of plists so this can be even more
confusing, albeit the debug nature of the config option.
Link: http://lkml.kernel.org/r/20190317185434.1626-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The bitmap_remap, _bitremap, _onto and _fold functions are only used,
via their node_ wrappers, in mm/mempolicy.c, which is only built for
CONFIG_NUMA. The helper bitmap_ord_to_pos used by these functions is
global, but its only external caller is node_random() in lib/nodemask.c,
which is also guarded by CONFIG_NUMA.
For !CONFIG_NUMA:
add/remove: 0/6 grow/shrink: 0/0 up/down: 0/-621 (-621)
Function old new delta
bitmap_pos_to_ord 20 - -20
bitmap_ord_to_pos 70 - -70
bitmap_bitremap 81 - -81
bitmap_fold 113 - -113
bitmap_onto 123 - -123
bitmap_remap 214 - -214
Total: Before=4776, After=4155, chg -13.00%
Link: http://lkml.kernel.org/r/20190329205353.6010-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
AFAICT, there have never been any callers of these functions outside
mm/mempolicy.c (via their nodemask.h wrappers). In particular, no
modular code has ever used them, and given their somewhat exotic
semantics, I highly doubt they will ever find such a use. In any case,
no need to export them currently.
Link: http://lkml.kernel.org/r/20190329205353.6010-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The out_unlock label is misleading; no unlocking happens after it, so
just return NULL directly.
Also, nothing between the kmem_cache_zalloc() that creates new and the
two key_put() can initialize new->uid_keyring or new->session_keyring,
so those calls are no-ops.
Link: http://lkml.kernel.org/r/20190424200404.9114-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The name clear_all_latency_tracing is misleading, in fact which only
clear per task's latency_record[], and we do have another function named
clear_global_latency_tracing which clear the global latency_record[]
buffer.
Link: http://lkml.kernel.org/r/20190226114602.16902-1-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. In latencytop source codes, we only have such calling chain:
account_scheduler_latency(struct task_struct *task, int usecs, int inter)
{
if (unlikely(latencytop_enabled)) /* the outtermost check */
__account_scheduler_latency(task, usecs, inter);
}
__account_scheduler_latency
account_global_scheduler_latency
if (!latencytop_enabled)
So, the inner check for latencytop_enabled is not necessary at all.
2. In clear_all_latency_tracing and now is called
clear_tsk_latency_tracing the check for latencytop_enabled is redundant
and buggy to some extent.
We have no reason to refuse clearing the /proc/$pid/latency if
latencytop_enabled is set to 0, considering that if we use latencytop
manually by echo 0 > /proc/sys/kernel/latencytop, then we want to clear
/proc/$pid/latency and failed.
Also we don't have such check in brother function
clear_global_latency_tracing.
Notes: These changes are only visible to users who set
CONFIG_LATENCYTOP and won't change user tool latencytop's behavior.
Link: http://lkml.kernel.org/r/20190226114602.16902-2-linf@wangsu.com
Signed-off-by: Lin Feng <linf@wangsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By design notifiers can be registerd once only, 2nd register attempt
called by mistake silently corrupts notifiers list.
A few years ago I investigated described problem, the host was power
cycled because of notifier list corruption. I've prepared this patch
and applied it to the OpenVZ kernel and sent this patch but nobody
commented on it. Later it helped us to detect a similar problem in the
OpenVz kernel.
Mistakes with notifier registration can happen for example during
subsystem initialization from different namespaces, or because of a lost
unregister in the roll-back path on initialization failures.
The proposed check cannot prevent the described problem, however it
allows us to detect its reason quickly without coredump analysis.
Link: http://lkml.kernel.org/r/04127e71-4782-9bbb-fe5a-7c01e93a99b0@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 60a3cdd063 ("x86: add optimized inlining") introduced
CONFIG_OPTIMIZE_INLINING, but it has been available only for x86.
The idea is obviously arch-agnostic. This commit moves the config entry
from arch/x86/Kconfig.debug to lib/Kconfig.debug so that all
architectures can benefit from it.
This can make a huge difference in kernel image size especially when
CONFIG_OPTIMIZE_FOR_SIZE is enabled.
For example, I got 3.5% smaller arm64 kernel for v5.1-rc1.
dec file
18983424 arch/arm64/boot/Image.before
18321920 arch/arm64/boot/Image.after
This also slightly improves the "Kernel hacking" Kconfig menu as
e61aca5158 ("Merge branch 'kconfig-diet' from Dave Hansen') suggested;
this config option would be a good fit in the "compiler option" menu.
Link: http://lkml.kernel.org/r/20190423034959.13525-12-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common
place. We need to eliminate potential issues beforehand.
If it is enabled for powerpc, the following errors are reported:
arch/powerpc/mm/tlb-radix.c: In function '__tlbie_lpid':
arch/powerpc/mm/tlb-radix.c:148:2: warning: asm operand 3 probably doesn't match constraints
asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
^~~
arch/powerpc/mm/tlb-radix.c:148:2: error: impossible constraint in 'asm'
arch/powerpc/mm/tlb-radix.c: In function '__tlbie_pid':
arch/powerpc/mm/tlb-radix.c:118:2: warning: asm operand 3 probably doesn't match constraints
asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
^~~
arch/powerpc/mm/tlb-radix.c: In function '__tlbiel_pid':
arch/powerpc/mm/tlb-radix.c:104:2: warning: asm operand 3 probably doesn't match constraints
asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
^~~
Link: http://lkml.kernel.org/r/20190423034959.13525-11-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common
place. We need to eliminate potential issues beforehand.
If it is enabled for powerpc, the following error is reported:
arch/powerpc/mm/tlb-radix.c: In function '__radix__flush_tlb_range_psize':
arch/powerpc/mm/tlb-radix.c:104:2: error: asm operand 3 probably doesn't match constraints [-Werror]
asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
^~~
arch/powerpc/mm/tlb-radix.c:104:2: error: impossible constraint in 'asm'
Link: http://lkml.kernel.org/r/20190423034959.13525-10-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common
place. We need to eliminate potential issues beforehand.
If it is enabled for powerpc, the following modpost warnings are
reported:
WARNING: vmlinux.o(.text.unlikely+0x20): Section mismatch in reference from the function .prom_getprop() to the function .init.text:.call_prom()
The function .prom_getprop() references the function __init .call_prom().
This is often because .prom_getprop lacks a __init annotation or the annotation of .call_prom is wrong.
WARNING: vmlinux.o(.text.unlikely+0x3c): Section mismatch in reference from the function .prom_getproplen() to the function .init.text:.call_prom()
The function .prom_getproplen() references the function __init .call_prom().
This is often because .prom_getproplen lacks a __init annotation or the annotation of .call_prom is wrong.
Link: http://lkml.kernel.org/r/20190423034959.13525-9-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
