forked from Minki/linux
0fdd951c9b
10875 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
aab7761c4f |
GPIO fixes in the first take after v4.13-rc1:
- LP87565: set the proper output level for direction_output. - stm32: fix the kernel build by selecting the hierarchical irqdomain symbol properly - this happens to be done in the pin control framework but whatever, it had dependencies to GPIO so we need to apply it here. - Select the hierarchical IRQ domain also for Xgene. - Fix wakeups to work on MXC. - Fix up the device tree binding on Exar that went astray, also add the right bindings. - Fix the unwanted events for edges from the library. - Fix the unbalanced chanined IRQ on the Tegra. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZhZFuAAoJEEEQszewGV1zAmIP/iuxZJLY8LM+eJ3FwR8xnzF1 qcOEoSEdKFTJUeZYSRE25LVxxBBGotKEzojLpjaBhQ9ikGnbtWlYv8VDi1SjIGb2 A4r+Ba55/ScOax1oyFJSytdczx8WcxekTfQDs+CtAi5JO+GTNTUw2MYIKo1CjEX4 gYHcLWJ16t0j/S/96Md1q3P2/ynhBcPF3mGoKSJzEW7iTTpLBjIscfiGGQpjX9fA k9WEhx9XvMLGCBTlrxR3WIzMQlYhfk3uY9C4MqtFiX86R6XsbXm256R4M+l0a31W I2TzVMJV5nUwIyPg8PpL53s1CiksbT1Yu1HlH01NXUpMxIVwotIRQe5eEKfdTULb wcLhj32skRGX7Kpz1SXWnm9LsCQlpwAHrZ4e1q509Fc/yFvinS/MJZ5Dtifs83I4 91XN/ZZUfSCAKI3B2MkB1MjwnOG2ifTqtlBLidDaAmxgImsL9mEInlXw2J44M60g gpBPzggCTph/xZxnorMYmAZ5n/WKjwIX2+iT6qbxuADG4rgcsdM5m1GmRF2/WAxS VH6jJfT3H8NRZ/lzVLxYjyjmaxdEqZcI4LIBaUhm50dz68SLcbB5H4t50xdMAFVt PiwkLbQQj//R4iNk4zHuCpsc53kJvL3jRIvtXw/pxlEbXFM7l6ikmxopmmjMAldh BPulF1CrT9we9Qq+ocbf =0ZOK -----END PGP SIGNATURE----- Merge tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - LP87565: set the proper output level for direction_output. - stm32: fix the kernel build by selecting the hierarchical irqdomain symbol properly - this happens to be done in the pin control framework but whatever, it had dependencies to GPIO so we need to apply it here. - Select the hierarchical IRQ domain also for Xgene. - Fix wakeups to work on MXC. - Fix up the device tree binding on Exar that went astray, also add the right bindings. - Fix the unwanted events for edges from the library. - Fix the unbalanced chanined IRQ on the Tegra. * tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: fix unbalanced chained_irq_enter/exit gpiolib: skip unwanted events, don't convert them to opposite edge gpio: exar: Use correct property prefix and document bindings gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake source gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHY pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on gpio: lp87565: Set proper output level and direction for direction_output MAINTAINERS: Add entry for Whiskey Cove PMIC GPIO driver |
||
Linus Torvalds
|
65f4740e72 |
ARM: SoC fixes for 4.13
This comes a bit later than I planned, and as a consequence is a larger than it should be. Most of the changes are devicetree fixes, across lots of platforms: Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci. Also across many platforms, I applied an older series of simple randconfig build fixes. This includes making the CONFIG_MTD_XIP option compile again, which had been broken for many years and probably has not been missed, but it felt wrong to just remove it completely. The only other changes are: - We enable HWSPINLOCK in defconfig to get some Qualcomm boards to work out of the box. - A few regression fixes for Texas Instruments OMAP2+. - A boot regression fix for the Renesas regulator quirk. - A suspend/resume fix for Uniphier SoCs, fixing the resume of the system bus. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAWYTonGCrR//JCVInAQJTrw/+Kv+Y1EybtFFJuMgVqH0FserTKAonNv25 OJxby86GQQTKkju9U7jYM4MmpufBEMKnY9kn83rviUKfiuVDsJcRWp2jMynJtE5m W1aIFCu1L8TsKAQJpmBPe8G/cSG7SRH2OoX9Ee5ozii0cBUTOCy6UGDYJqsY0MKy 8KPUWcHqYhLCT+0F0raf1+F5LqJlDh44q1+UVDPphqO4pbguio7PfXA+ut8VMHS7 YSDgiXb3UoXy8tSXRX4JcYJfFG+jIqg0vWpkOW9mlLc5e/+Ndmj5CWlDZPt4hWaR 3Us5VVkI8SXq7VGcJV/mA6JO7M4L4oP1caTATxzDdK1C2u/SuhdnMcenOy8LtRLi gImdeZLK7+RFPS+Sp/mhQQ0UtULw0kQ5BEzpN0jVI1CKybK4TN2+GrJdZLR9Usas TkavAUl0X5E7YXws7yb8qTJqDLXxTxyN8H4gMaTh+rCssh9+I8bvChoJ0gpGRIMl iAHodqGFBvlVQWtUefc4BfDCqj7sVmtfBcAeOK7LVQPjb9D+hPvHJ50yfN3qMpMa eVvEz4l91W4k/vxI5HsA/r7RybDujTLvgR/BGU0kLZAsEP/FpkrIKgmi5yuzyf1u Sd3OiK8V7FXB3dBPf0i0wagaBjuEUcEuE0GQU+bM7qX5aW8flLxbEhj4SEv0NqvL bHiaTEi9uAU= =a2dO -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This comes a bit later than I planned, and as a consequence is a larger than it should be. Most of the changes are devicetree fixes, across lots of platforms: Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci. Also across many platforms, I applied an older series of simple randconfig build fixes. This includes making the CONFIG_MTD_XIP option compile again, which had been broken for many years and probably has not been missed, but it felt wrong to just remove it completely. The only other changes are: - We enable HWSPINLOCK in defconfig to get some Qualcomm boards to work out of the box. - A few regression fixes for Texas Instruments OMAP2+. - A boot regression fix for the Renesas regulator quirk. - A suspend/resume fix for Uniphier SoCs, fixing the resume of the system bus" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: dts: tango4: Request RGMII RX and TX clock delays bus: uniphier-system-bus: set up registers when resuming ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk arm64: defconfig: enable missing HWSPINLOCK ARM: pxa: select both FB and FB_W100 for eseries ARM: ixp4xx: fix ioport_unmap definition ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly ARM: mmp: mark usb_dma_mask as __maybe_unused ARM: omap2: mark unused functions as __maybe_unused ARM: omap1: avoid unused variable warning ARM: sirf: mark sirfsoc_init_late as __maybe_unused ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l} ARM: omap1/ams-delta: warn about failed regulator enable ARM: rpc: rename RAM_SIZE macro ARM: w90x900: normalize clk API ARM: ep93xx: normalize clk API ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros arm64: allwinner: sun50i-a64: Correct emac register size ARM: dts: sunxi: h3/h5: Correct emac register size ... |
||
Arnd Bergmann
|
e86c86bc8e |
Fix for the recently added mali dt support. The example
showed a wrong value, so fix it before it gets copy-pasted to much. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmEM5wQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgVn+B/9Xy9km3t8cFVQ//SjNm1MEfiyVrgCnH6TH trLit6AKq19LTIfeyI2RQucEXB0Csw2+YNh4q9Td6utnc0S3OpzueFsfKfAD9xif WpRR6MJjCSlIQfhd09XuKyWoDwwNmnidv+Xd/H3M83dTOzoPmy0aDkn/shc1I+Tw gL0CbLPz1HuHuG55S5EkxcBNi/Mj34qI5e3O8hrqzpfzmc1CdQ38zblfkiyu94v7 f/sVUv8p2YHyfvIJ1n1DxQx7lvAxGzo3Q7fXqS9D1jJx4iDWWFaraLMPu3NztLcv 1XrawJTdGZ9vTJSmzcEwH7JeAUHX41wIWjf/jEx9iE2R9EY0lyLo =B0nU -----END PGP SIGNATURE----- Merge tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Pull "Rockchip dts32 fixes for 4.13" from Heiko Stübner: Fix for the recently added mali dt support. The example showed a wrong value, so fix it before it gets copy-pasted to much. * tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix mali gpu node on rk3288 dt-bindings: gpu: drop wrong compatible from midgard binding example |
||
Jan Kiszka
|
a589e211bd |
gpio: exar: Use correct property prefix and document bindings
The device-specific property should be prefixed with the vendor name,
not "linux,", as Linus Walleij pointed out. Change this and document the
bindings of this platform device.
We didn't ship the old binding in a release yet. So we can still change
it without breaking an official API.
Fixes:
|
||
Linus Torvalds
|
3dcc4c7d42 |
Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo: "Dan found a really old bug where libata hotplug code wasn't sanitizing index value from userland and may end up indexing with a negative number. It is scary but fortunately can only be triggered by root. Other than that, minor fixes" * 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: fix a couple of doc build warnings libata: array underflow in ata_find_dev() ata: sata_rcar: add gen[23] fallback compatibility strings libata: remove unused rc in ata_eh_handle_port_resume libata: Cleanup ata_read_log_page() ata: fix gemini Kconfig dependencies |
||
Linus Torvalds
|
e26f1bea3b |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu: - remove broken dt bindings in inside-secure - fix authencesn crash when used with digest_null - fix cavium/nitrox firmware path - fix SHA3 failure in brcm - fix Kconfig dependency for brcm * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: authencesn - Fix digest_null crash crypto: brcm - remove BCM_PDC_MBOX dependency in Kconfig Documentation/bindings: crypto: remove the dma-mask property crypto: inside-secure - do not parse the dma mask from dt crypto: cavium/nitrox - Change in firmware path. crypto: brcm - Fix SHA3-512 algorithm failure |
||
Linus Torvalds
|
a2d48756ca |
MMC host:
- sunxi: Correct time phase settings - omap_hsmmc: Clean up some dead code - dw_mmc: Fix message printed for deprecated num-slots DT binding - dw_mmc: Fix DT documentation -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZeu0JAAoJEP4mhCVzWIwpECAP/0kf5o3lEneUOqSGE9d1EszW GpHgX0hA1+FaQpBUhGAfFCjmNigsH8rwz8dOv17PX8iFyQmal0ivgC7DXJPG2Rq1 ofC4MwfWzZE0AKRSLButvRyNHqmwZsSM8nlFPwAtsINktJCx/WhSr6OS5pNEdz/j 1tEGDgLzBiq9Yd3FHf07KPPkMhxut0eI1gXke8pRgFkLQIwU4/8zFb6450w0RIxQ BtmqEEK0p3cyZLN/FxpyMG6ZVmypTUiMFX9G0xkcKdsTxGqnYpWvCFuEbEtx6vbU 5IjjKc2oINMs3z53tRiN/vQaSuZMn1O4dKHydADxP68Pm/ff09+pgvnpTV4D83RV /gw9olO1Y//ONCT+p/k2fHhOlLUa4YY2+SUCN7VZAqP5gYEjtH9/doOoWND//WPA BhFcZsWBoDva+M3OC2wNnZb5aCERVLuHPl3NhdiOpxyGoEEG1c0MvhegaUI4Rm0K hoVyuXqWsbu+3A3H+biELb0VEIlgELkCIRh7mjKSq8oicPN7PtymhAgfGyxcCkn+ qcvlN0UxcJjYxYTXzKjEaTiCHeel0UB3toCWdfq+L5znHgRMjZoxYM/tUhF8+rts wTcS/NkLz4DGJGQavfJvdawddafCbFnoL19KnWd2Wl3RxNOrQ2lnvfBODDuPrVoz IJqzwddWO/w6gTDT5Xt6 =xWHL -----END PGP SIGNATURE----- Merge tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.13-rc1. I have also included a couple of cleanup patches in this pull request for OMAP2+, related to the omap_hsmmc driver. The reason is because of the changes are also depending on OMAP SoC specific code, so this simplifies how to deal with this. Summary: MMC host: - sunxi: Correct time phase settings - omap_hsmmc: Clean up some dead code - dw_mmc: Fix message printed for deprecated num-slots DT binding - dw_mmc: Fix DT documentation" * tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: Documentation: dw-mshc: deprecate num-slots mmc: dw_mmc: fix the wrong condition check of getting num-slots from DT mmc: host: omap_hsmmc: remove unused platform callbacks ARM: OMAP2+: hsmmc.c: Remove dead code mmc: sunxi: Keep default timing phase settings for new timing mode |
||
Shawn Lin
|
3f5b4b79d4 |
Documentation: dw-mshc: deprecate num-slots
dwmmc host driver already deprecate it in the driver
but didn't modify the documentation to reflect the fact.
This patch deprecates it and clean up num-slots from the
examples of all variant host drivers.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes:
|
||
Linus Torvalds
|
ae75d1aefe |
TTY/Serial fixes for 4.13-rc2
Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWXMebA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yn9MgCdGsIEQlTvTeG4QikxUPB7dkEJQacAoLWOKJzQ A65mBAeOfiJztczi8uo4 =KEXp -----END PGP SIGNATURE----- Merge tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing huge at all, a revert of a patch that turned out to break things, a fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition correct, and a few minor serial driver fixes for reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix TIOCGPTPEER ioctl definition tty: hide unused pty_get_peer function tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART serial: imx: Prevent TX buffer PIO write when a DMA has been started Revert "serial: imx-serial - move DMA buffer configuration to DT" serial: sh-sci: Uninitialized variables in sysfs files serial: st-asc: Potential error pointer dereference |
||
Linus Torvalds
|
dedaff2f6d |
Char/Misc driver fixes for 4.13-rc2
Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWXMc8Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymePwCdEFD40T8GU7dnOHWVMkpX0wuNlOYAnijkamLl o41CVfvi/9Zwz6msMHX7 =HmjL -----END PGP SIGNATURE----- Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 4.13-rc2. All fix reported problems with 4.13-rc1 or older kernels (like the binder fixes). Full details in the shortlog. All have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: w1: omap-hdq: fix error return code in omap_hdq_probe() regmap: regmap-w1: Fix build troubles w1: Fix slave count on 1-Wire bus (resend) mux: mux-core: unregister mux_class in mux_exit() mux: remove the Kconfig question for the subsystem nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse drivers/fsi: fix fsi_slave_mode prototype fsi: core: register with postcore_initcall thunderbolt: Correct access permissions for active NVM contents vmbus: re-enable channel tasklet spmi: pmic-arb: Always allocate ppid_to_apid table MAINTAINERS: Add entry for SPMI subsystem spmi: Include OF based modalias in device uevent binder: Use wake up hint for synchronous transactions. binder: use group leader instead of open thread Revert "android: binder: Sanity check at binder ioctl" |
||
Linus Torvalds
|
96080f6977 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) BPF verifier signed/unsigned value tracking fix, from Daniel Borkmann, Edward Cree, and Josef Bacik. 2) Fix memory allocation length when setting up calls to ->ndo_set_mac_address, from Cong Wang. 3) Add a new cxgb4 device ID, from Ganesh Goudar. 4) Fix FIB refcount handling, we have to set it's initial value before the configure callback (which can bump it). From David Ahern. 5) Fix double-free in qcom/emac driver, from Timur Tabi. 6) A bunch of gcc-7 string format overflow warning fixes from Arnd Bergmann. 7) Fix link level headroom tests in ip_do_fragment(), from Vasily Averin. 8) Fix chunk walking in SCTP when iterating over error and parameter headers. From Alexander Potapenko. 9) TCP BBR congestion control fixes from Neal Cardwell. 10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger. 11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong Wang. 12) xmit_recursion in ppp driver needs to be per-device not per-cpu, from Gao Feng. 13) Cannot release skb->dst in UDP if IP options processing needs it. From Paolo Abeni. 14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander Levin and myself. 15) Revert some rtnetlink notification changes that are causing regressions, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) net: bonding: Fix transmit load balancing in balance-alb mode rds: Make sure updates to cp_send_gen can be observed net: ethernet: ti: cpsw: Push the request_irq function to the end of probe ipv4: initialize fib_trie prior to register_netdev_notifier call. rtnetlink: allocate more memory for dev_set_mac_address() net: dsa: b53: Add missing ARL entries for BCM53125 bpf: more tests for mixed signed and unsigned bounds checks bpf: add test for mixed signed and unsigned bounds checks bpf: fix up test cases with mixed signed/unsigned bounds bpf: allow to specify log level and reduce it for test_verifier bpf: fix mixed signed/unsigned derived min/max value bounds ipv6: avoid overflow of offset in ip6_find_1stfragopt net: tehuti: don't process data if it has not been copied from userspace Revert "rtnetlink: Do not generate notifications for CHANGEADDR event" net: dsa: mv88e6xxx: Enable CMODE config support for 6390X dt-binding: ptp: Add SoC compatibility strings for dte ptp clock NET: dwmac: Make dwmac reset unconditional net: Zero terminate ifr_name in dev_ifname(). wireless: wext: terminate ifr name coming from userspace netfilter: fix netfilter_net_init() return ... |
||
Arun Parameswaran
|
65e3c76635 |
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
Add SoC specific compatibility strings to the Broadcom DTE
based PTP clock binding document.
Fixed the document heading and node name.
Fixes:
|
||
Antoine Ténart
|
6eb8844bf4 |
Documentation/bindings: crypto: remove the dma-mask property
The dma-mask property is broken and was removed in the device trees having a safexcel-eip197 node and in the safexcel cryptographic driver. This patch removes the dma-mask property from the documentation as well. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Frank Wang
|
d6e4bd1b52 |
nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
As the comments from Heiko Stuebner <heiko@sntech.de> that compatible should not contain any placeholders, this patch fix it for rk3228 SoC. Note that this is a fix for v4.13, due to fixing the current non-standard binding name that should not become part of an official kernel release. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
351ea50df5 |
Revert "serial: imx-serial - move DMA buffer configuration to DT"
This reverts commit
|
||
Heiko Stuebner
|
670d6303e9 |
dt-bindings: gpu: drop wrong compatible from midgard binding example
The binding rightfully only specifies compatibles for actual implementations and not for the whole family. In the example an arm,mali-midgard slipped through from downstream devicetrees though. So drop that to not confuse people reading (or copying) that example. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> |
||
Florian Fainelli
|
ea6c307767 |
dt-bindings: net: Remove duplicate NSP Ethernet MAC binding document
Commit |
||
Abhishek Shah
|
10d79f7d3c |
Documentation: devicetree: net: optional idm regs for bgmac
Specifying IDM register space in DT is not mendatory for SoCs where firmware takes care of IDM operations. This patch updates BGMAC driver's DT binding documentation indicating the same. Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Oza Oza <oza.oza@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
568d135d33 |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ... |
||
Simon Horman
|
6ac1d1532c |
ata: sata_rcar: add gen[23] fallback compatibility strings
Add fallback compatibility string for R-Car Gen 2 and 3. In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> |
||
Linus Torvalds
|
3a00be1923 |
RTC for 4.13
Subsystem: - expose non volatile RAM using nvmem instead of open coding in many drivers. Unfortunately, this option has to be enabled by default to not break existing users. - rtctest can now test for cutoff dates, showing when an RTC will start failing to properly save time and date. - new RTC registration functions to remove race conditions in drivers Newly supported RTCs: - Broadcom STB wake-timer - Epson RX8130CE - Maxim IC DS1308 - STMicroelectronics STM32H7 Drivers: - ds1307: use regmap, use nvmem, more cleanups - ds3232: temperature reading support - gemini: renamed to ftrtc010 - m41t80: use CCF to expose the clock - rv8803: use nvmem - s3c: many cleanups - st-lpc: fix y2106 bug -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAllnMUIACgkQAyWl4gNJ NJJGNxAAqMTrggkF6KTvFCVAoMHdkeAxuoyigwCH8BCm2gOm5Qj8ZodZxndcl3Gb dWG+c1pHf4KXrz59h6ZGI4qFgIpCyJpjGpyJs0Pvt6gY7YIqHrEa1nvcrPO7DaWw fPPcszyiymDOsb6d+wJzriA2ISJUHy7Kf6FUb0fjQLoYNl7ezgzdV6+dvePOPcW1 kaAfRX8XqrkECrDFFHlX1Szb78qGhcUB1TmWFW+hadICTguBLX/fro0DKWRw2POQ y3cHKqMzFhTD1+jkp26o535x/D9CWDXzLmLvRF5tBQ0X7V2UIGchj4aNEHT0Ruwx YlGzB3WDwfj/Jl+VALmY27mplf71z5ppJRhaFn84OWrJmvjS/2EF9TCCBc4XvzzX dH/5nvPyNrUYnayTTCXiPhN3p4ivywHXqA9gkHcWb3BagNIpuvwNVnJT/Sxz3Y5R Gt2zGl07NKQ1EtEThQEIBOMXy9nJ2PVJdQFmLehj1PfxX+Gbs42tWBILzl4n1rgT yUFLMGw1Y0/h39jw7t+uKM7v0aXPHOXLrwaDKIj+c4ffVXD8IALhgG7BL4dOQPSF rRPKi5QNYJMnuBeKHJrFlq7xWqHRVUfTFh16eyYvwGLGWiUuGe9akhlabl6bE8jG fm3TlHPNieGMObXijwEVePkY6z7E0CLE+d1iQsDK6ZgO/z3pdOo= =QDxE -----END PGP SIGNATURE----- Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Here is the pull-request for the RTC subsystem for 4.13. Subsystem: - expose non volatile RAM using nvmem instead of open coding in many drivers. Unfortunately, this option has to be enabled by default to not break existing users. - rtctest can now test for cutoff dates, showing when an RTC will start failing to properly save time and date. - new RTC registration functions to remove race conditions in drivers Newly supported RTCs: - Broadcom STB wake-timer - Epson RX8130CE - Maxim IC DS1308 - STMicroelectronics STM32H7 Drivers: - ds1307: use regmap, use nvmem, more cleanups - ds3232: temperature reading support - gemini: renamed to ftrtc010 - m41t80: use CCF to expose the clock - rv8803: use nvmem - s3c: many cleanups - st-lpc: fix y2106 bug" * tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits) rtc: Remove wrong deprecation comment nvmem: include linux/err.h from header rtc: st-lpc: make it robust against y2038/2106 bug rtc: rtctest: add check for problematic dates tools: timer: add rtctest_setdate rtc: ds1307: remove ds1307_remove rtc: ds1307: use generic nvmem rtc: ds1307: switch to rtc_register_device rtc: rv8803: remove rv8803_remove rtc: rv8803: use generic nvmem support rtc: rv8803: switch to rtc_register_device rtc: add generic nvmem support rtc: at91rm9200: remove race condition rtc: introduce new registration method rtc: class separate id allocation from registration rtc: class separate device allocation from registration rtc: stm32: add STM32H7 RTC support dt-bindings: rtc: stm32: add support for STM32H7 rtc: ds1307: add ds1308 variant rtc: ds3232: add temperature support ... |
||
Linus Torvalds
|
b5e16170f5 |
MTD updates for v4.13-rc1:
General updates * Cleanups and additional flash support for "dataflash" driver * new driver for mchp23k256 SPI SRAM device * improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE) * refactor and improve "sub-partition" handling with TRX partition parser; partitions can now be created as sub-partitions of another partition SPI NOR updates, from Cyrille Pitchen and Marek Vasut: * introduce support to the SPI 1-2-2 and 1-4-4 protocols. * introduce support to the Double Data Rate (DDR) mode. * introduce support to the Octo SPI protocols. * add support to new memory parts for Spansion, Macronix and Winbond. * add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. * clean up the st_spi_fsm driver. NAND updates, from Boris Brezillon: * addition of on-die ECC support to Micron driver * addition of helpers to help drivers choose most appropriate ECC settings * deletion of dead-code (cached programming and ->errstat() hook) * make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) * change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag * support exiting 'GET STATUS' command in default ->cmdfunc() implementations * change the prototype of ->setup_data_interface() A bunch of driver related changes: * various cleanup, fixes and improvements of the MTK driver * OMAP DT bindings fixes * support for ->setup_data_interface() in the fsmc driver * support for imx7 in the gpmi driver * finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) * fix "bitflips in erased pages" handling in the ifc driver * addition of PM ops and dynamic timing configuration to the atmel driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZZ7bdAAoJEFySrpd9RFgtZvIP+wfo25Lkv2gFRIFhnoDnxDfu 1pLVL8HrgTYBcD3dmr9ghONq+bxh2SSz3gU20i/eWmOmKy1OwaGegSj88hYpGOpS 2bwWWlczMqkX+upHw0une3ZrTb6pjoyHKHr5I5GYoJPgG2Dw2D3joehRkvMDispD 9cEik9HkyliHXy/1mqFsToe5RwdqauLbKR/a2XZQo89gt8n8Rnlt91Q5QOZytC6r GLkuQzRAf4qVi4sgDb7zvFZW7KeyGTXTLDxKZGG9JETNjzcEJZMykAWxR9SwBCHa tL7HjyaU5d2rXo4ukZ4IplKn9Y+BneDeGomy44DcGP6RAyNDqVC/R5eFW+MtlbwY rm6SDxs9vCeUBrgIaJlVqDJxca/OR3ruHKILGbEfvIy/MmRQ4keBf357Dew8o4x/ wQw2dgznn3/vs5aqSz/E+erY22gdnaHtDApaefB/D0Kqi9fs2yVaAh3gGcXmloO9 yfRfzPugMRwI29gztMkgRWKWTCfHe2JN4hLDMVwO7Rt3ucQIbz642N/4JVMEpDcX gJcaSgXn/u6xRJnEX/2u+B6ERNqVvLZ8fbnfD0fkPkjLOISvfg38xti1qgoxs8z8 tm5lMI7VR9/MKIxCXT/6Z+actDV21j/oo0QInV3YMxHDPl5KBj+migsRtDzpGhna dmztYIMYqF9I29skWgXR =ReBr -----END PGP SIGNATURE----- Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd Pull MTD updates from Brian Norris: "General updates: - Cleanups and additional flash support for "dataflash" driver - new driver for mchp23k256 SPI SRAM device - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE) - refactor and improve "sub-partition" handling with TRX partition parser; partitions can now be created as sub-partitions of another partition SPINOR updates, from Cyrille Pitchen and Marek Vasut: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. NAND updates, from Boris Brezillon: - addition of on-die ECC support to Micron driver - addition of helpers to help drivers choose most appropriate ECC settings - deletion of dead-code (cached programming and ->errstat() hook) - make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) - change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag - support exiting 'GET STATUS' command in default ->cmdfunc() implementations - change the prototype of ->setup_data_interface() A bunch of driver related changes: - various cleanup, fixes and improvements of the MTK driver - OMAP DT bindings fixes - support for ->setup_data_interface() in the fsmc driver - support for imx7 in the gpmi driver - finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) - fix "bitflips in erased pages" handling in the ifc driver - addition of PM ops and dynamic timing configuration to the atmel driver" * tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits) Documentation: ABI: mtd: describe "offset" more precisely mtd: Fix check in mtd_unpoint() mtd: nand: mtk: release lock on error path mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead mtd: spi-nor: cqspi: remove duplicate const mtd: spi-nor: Add support for Spansion S25FL064L mtd: spi-nor: Add support for mx66u51235f mtd: nand: mtk: add ->setup_data_interface() hook mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume mtd: nand: mtk: disable ecc irq when writing page with hwecc mtd: nand: mtk: fix incorrect register setting order about ecc irq mtd: partitions: fixup some allocate_partition() whitespace mtd: parsers: trx: fix pr_err format for printing offset MAINTAINERS: Update SPI NOR subsystem git repositories mtd: extract TRX parser out of bcm47xxpart into a separated module mtd: partitions: add support for partition parsers mtd: partitions: add support for subpartitions mtd: partitions: rename "master" to the "parent" where appropriate mtd: partitions: remove sysfs files when deleting all master's partitions ... |
||
Linus Torvalds
|
38f7d2da4e |
pwm: Changes for v4.13-rc1
This release cycle's changes include mostly updates and cleanups to existing drivers along with a few cleanups to the core, documentation and device tree bindings. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAllnboQZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zocCFD/9kUnHzwyM3epnGQruCwgLI xwcZmk2vAImbLoMN0NwtLpKyxIxehDCjvgsRxAm5ggE7Whs2Wzs1tzdML863umdl DcfF46T+zHlUXNZMgES+Znp787G6Bqnjj35PNVqNneptukmrZakPMQ4nZkL0UidD dZnXs/KhK97G4ys00+uVSfS/x6Ck1oD9XUtJttSGx4f7wIhWcsiwUpJvi772jcG+ bVmVkbJsOnui4UdvUs1uCb5yOppzOJqwsuNCAyX9a3NKR6u3/RtETjo4DQHhqXrv mXoHEIZkljDOgni2Zu/kcUDjooQ/GJVLjwku2iq1UGmJTu6FOJKqSLBKGQzyCXs+ BN0JM7pwEwwGKFzKbNn/ZxpJD06Hk0ABWcjeObIgsZaUOGmUdiDzwpFmLtKK22TC 9zNEODo+OjuaNYKADa4RHZrDbujiPMCL9ezonO3Xb1AS9UQfR8wXsVFqR44EofQA 0x+q+yIS5GVMab6s/jN51G/RVW2Ao+SdT+0/F8QF8N3YlCFsFCwt+X96383oDPAj STiHxqIRzEkn44Ua9CFg9utTrQeUVtNB3tw0wnD+zgsMFH1YRzcU2p714viqN8tQ N0yJUi+VwHXxnfNiVZNdrgidRH7ETWXyJY/OFRt2BCq9VuZ8V3E/Dr41pgFxZ0e6 WP7awOH/n25e4L09CjRtng== =ioFX -----END PGP SIGNATURE----- Merge tag 'pwm/for-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This release cycle's changes include mostly updates and cleanups to existing drivers along with a few cleanups to the core, documentation and device tree bindings" * tag 'pwm/for-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: cros-ec: Fix transposed param settings pwm: meson: Improve PWM calculation precision dt-bindings: pwm: meson: Add compatible for gxbb ao PWMs pwm: meson: Add compatible for the gxbb ao PWMs pwm: sun4i: Drop legacy callbacks pwm: sun4i: Switch to atomic PWM pwm: sun4i: Improve hardware read out pwm: hibvt: Constify hibvt_pwm_ops pwm: Silently error out on EPROBE_DEFER pwm: Standardize document format pwm: bfin: Remove unneeded error message dt-bindings: pwm: Update STM32 timers clock names dt-bindings: pwm: Add R-Car M3-W device tree bindings pwm: tegra: Set maximum pwm clock source per SoC tapeout |
||
Linus Torvalds
|
235b84fc86 |
Merge branch 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "This pull request contains: - i2c core reorganization. One source file became too monolithic. It is now split up, yet we still have the same named object as the final output. This should ease maintenance. - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX - designware driver gained slave mode support - xgene-slimpro driver gained ACPI support - bigger overhaul for pca-platform driver - the algo-bit module now supports messages with enforced STOP - slightly bigger than usual set of driver updates and improvements and with much appreciated quality assurance from Andy Shevchenko" * 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: Provide a stub for i2c_detect_slave_mode() i2c: designware: Let slave adapter support be optional i2c: designware: Make HW init functions static i2c: designware: fix spelling mistakes i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus i2c: pca-platform: correctly set algo_data.reset_chip i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices i2c: designware: enable SLAVE in platform module i2c: designware: add SLAVE mode functions i2c: zx2967: drop COMPILE_TEST dependency i2c: zx2967: always use the same device when printing errors i2c: pca-platform: use dev_warn/dev_info instead of printk i2c: pca-platform: use device managed allocations i2c: pca-platform: add devicetree awareness i2c: pca-platform: switch to struct gpio_desc dt-bindings: add bindings for i2c-pca-platform i2c: cadance: fix ctrl/addr reg write order i2c: zx2967: add i2c controller driver for ZTE's zx2967 family dt: bindings: add documentation for zx2967 family i2c controller i2c: algo-bit: add support for I2C_M_STOP ... |
||
Linus Torvalds
|
fb4e3beeff |
IOMMU Updates for Linux v4.13
This update comes with: * Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM * Some Errata workarounds for ARM SMMU implemenations * Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before * Support for amd_iommu=off when booting with kexec. Problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel * The Rockchip IOMMU driver is now available on ARM64 * Align the return value of the iommu_ops->device_group call-backs to not miss error values * Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT * Various other small cleanups and fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZZgddAAoJECvwRC2XARrjurgQANO338GIBr2ZkA0oectidDpZ Y4yu7W9RH6NyhupJG/Xooya7daBWFjbaA1AVJ3ZZNlMERh69AmehVfRUfVMzF2w+ buma58HQgiJWN1zFD8xdeMzYKms9P77whA88C/9QvrK/klB3LipWP2SC0yvvvyxJ mMCDpgt+D+CGnIDqbRuyLDQoRu3yjAkAvYb6OzL8DPJVP1Y5oLffGwGnHzJbJnOf eWJwYHM5ai0uF/Qqy6RNNekacObjVaOLihjugGvokH6ipXfOrSSNriXW9pZiWR5m S91898YTP3KuWWsJM+N93UAjvc6pL9PqL/OvbB9zdYpzu+5PtUpFXHYcOebKyEEO 4j9CaRzubsWFTFjbYItJnR4WgXQRf4NKOGfTfHMHA+dY8aODYnlXNVdQDAA2aFgn TUBvHq5xb0zZ3nbPwtTDyW06oDMVfBBarLx2yFI1aQSSh+eg/GtIi5KP28gyFZNz 4gWj0q3g/e3y7WEwNbYV7L3TS0d/p8VUYFtUp7PUCddnWoY+4cJzgidub5xIViZD Ql0nZzga9pXXIE/kE5Pf74WqrG7JJzZsvK2ABy4+XGrMq6RclJf+0pXbSqiXDpXL quw8t0oXw0ZEeavQ31Za8mjXBvo5ocM5iintl1wrl2BujHEO3oKqbGsIOaRcLnlN Ukehbl4OEKzZpD3oLPPk =pmBf -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ... |
||
Linus Torvalds
|
07d306c838 |
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - Add Renesas RZ/A WDT Watchdog driver - STM32 Independent WatchDoG (IWDG) support - UniPhier watchdog support - Add F71868 support - Add support for NCT6793D and NCT6795D - dw_wdt: add reset lines support - core: add option to avoid early handling of watchdog - core: introduce watchdog_worker_should_ping helper - Cleanups and improvements for sama5d4, intel-mid_wdt, s3c2410_wdt, orion_wdt, gpio_wdt, it87_wdt, meson_wdt, davinci_wdt, bcm47xx_wdt, zx2967_wdt, cadence_wdt * git://www.linux-watchdog.org/linux-watchdog: (32 commits) watchdog: introduce watchdog_worker_should_ping helper watchdog: uniphier: add UniPhier watchdog driver dt-bindings: watchdog: add description for UniPhier WDT controller watchdog: cadence_wdt: make of_device_ids const. watchdog: zx2967: constify zx2967_wdt_ops. watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_ops watchdog: davinci: Add missing clk_disable_unprepare(). watchdog: davinci: Handle return value of clk_prepare_enable watchdog: meson: Handle return value of clk_prepare_enable watchdog: it87: Add support for various Super-IO chips watchdog: it87: Use infrastructure to stop watchdog on reboot watchdog: it87: Drop support for resetting watchdog though CIR and Game port watchdog: it87: Convert to use watchdog core infrastructure watchdog: it87: Drop FSF mailing address watchdog: dw_wdt: get reset lines from dt watchdog: bindings: dw_wdt: add reset lines watchdog: w83627hf: Add support for NCT6793D and NCT6795D watchdog: core: add option to avoid early handling of watchdog watchdog: f71808e_wdt: Add F71868 support watchdog: Add STM32 IWDG driver ... |
||
Paul Burton
|
7461279bba |
dt-bindings: Document img,boston-clock binding
Add device tree binding documentation for the clocks provided by the MIPS Boston development board from Imagination Technologies, and a header file describing the available clocks for use by device trees & driver. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
||
Linus Torvalds
|
af3c8d9850 |
main drm pull for v4.13
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZYseIAAoJEAx081l5xIa+85kP/0zKzKKVzZXSXG2TAGb5jNfk Ex+TELG8tWk9KBxA7lEE5c0WEsnP79cNoXZLQu8wlUzO8+kwQK5Bz0zgNUkpSuo1 RthwdsxBQX1++UxB+HoSG+dOa7hkKVqlgQR3z9qyhsBXzetkJV0DoYcpMV0A1EWd 6Jzt+AvCShVkcW+21LqHPlc5EIVewrDMoA3oU6aYCLhyAOUTVvvQB2ML8YApH7TM JrSrzCFHTrQEBbGUrZQhzR0sZzZzk9byntb/I/mdVbHeCyIHiL8sC4PfWSOyyazm GkPnA8G3aFAY9haBRz9jG/VBr1yVb0mCBjkWQ1lGfIAOCDDSc+d7PDXdG+i4AewK jZheXlrDIdGgmJLy4W3rdEqJvdf7UQHZOs8594OL19l4+FxCTrol1JSHSMeavCvr 8bUNil9Jb/ONU/wmp+q55U0k4TCTyerUA7gKnuaJAwBvd4n78/PKmQnbrWinDyJc GQXp6zESk9bKt5DXSnVZuVf4POTzpuAsQkkfX1V2y145EHTQYfS3jLENWqEjyZUy QtKCHZvRkJfGaFU4Pr+vBo9Iu1GlA5OiOv08QadldTT4OxUI0T6yaLDobHCQfKPE sc3wCuCM+/dAnqoKDcGC4hAmF8zDdO0kw65P2m7uC6T9Jm1G35CioKbzo+fzUhuL fg5TBpbp2Wwe2oPA5iBm =2S5N -----END PGP SIGNATURE----- Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "This is the main pull request for the drm, I think I've got one later driver pull for mediatek SoC driver, I'm undecided on if it needs to go to you yet. Otherwise summary below: Core drm: - Atomic add driver private objects - Deprecate preclose hook in modern drivers - MST bandwidth tracking - Use kvmalloc in more places - Add mode_valid hook for crtc/encoder/bridge - Reduce sync_file construction time - Documentation updates - New DRM synchronisation object support New drivers: - pl111 - pl111 CLCD display controller Panel: - Innolux P079ZCA panel driver - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels - panel-samsung-s6e3ha2: Add s6e3hf2 panel support i915: - SKL+ watermark fixes - G4x/G33 reset improvements - DP AUX backlight improvements - Buffer based GuC/host communication - New getparam for (sub)slice infomation - Cannonlake and Coffeelake initial patches - Execbuf optimisations radeon/amdgpu: - Lots of Vega10 bug fixes - Preliminary raven support - KIQ support for compute rings - MEC queue management rework - DCE6 Audio support - SR-IOV improvements - Better radeon/amdgpu selection support nouveau: - HDMI stereoscopic support - Display code rework for >= GM20x GPUs msm: - GEM rework for fine-grained locking - Per-process pagetable work - HDMI fixes for Snapdragon 820. vc4: - Remove 256MB CMA limit from vc4 - Add out-fence support - Add support for cygnus - Get/set tiling ioctls support - Add T-format tiling support for scanout zte: - add VGA support. etnaviv: - Thermal throttle support for newer GPUs - Restore userspace buffer cache performance - dma-buf sync fix stm: - add stm32f429 display support exynos: - Rework vblank handling - Fixup sw-trigger code sun4i: - V3s display engine support - HDMI support for older SoCs - Preliminary work on dual-pipeline SoCs. rcar-du: - VSP work imx-drm: - Remove counter load enable from PRE - Double read/write reduction flag support tegra: - Documentation for the host1x and drm driver. - Lots of staging ioctl fixes due to grate project work. omapdrm: - dma-buf fence support - TILER rotation fixes" * tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits) drm: Remove unused drm_file parameter to drm_syncobj_replace_fence() drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu. amdgpu: Set cik/si_support to 1 by default if radeon isn't built drm/amdgpu/gfx9: fix driver reload with KIQ drm/amdgpu/gfx8: fix driver reload with KIQ drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay drm/ttm: Fix use-after-free in ttm_bo_clean_mm drm/amd/amdgpu: move get memory type function from early init to sw init drm/amdgpu/cgs: always set reference clock in mode_info drm/amdgpu: fix vblank_time when displays are off drm/amd/powerplay: power value format change for Vega10 drm/amdgpu/gfx9: support the amdgpu.disable_cu option drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10 drm/amdgpu: Make amdgpu_cs_parser_init static (v2) drm/amdgpu/cs: fix a typo in a comment drm/amdgpu: Fix the exported always on CU bitmap drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup drm/amd/powerplay/cz: print message if smc message fails drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init ... |
||
Linus Torvalds
|
f263fbb8d6 |
pci-v4.13-changes
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZYAFUAAoJEFmIoMA60/r8cFQP/A4fpdjhd42WRNQXGTpZieop i40lBQtGdBn/UY97U6BoutcS1ygDi9OiSzg+IR6I90iMgidqyUHFhe4hGWgVHD2g Tg0KLzd+lKKfQ6Gqt1P6t4dLGLvyEj5NUbCeFE4XYODAUkkiBaOndax6DK1GvU54 Vjuj63rHtMKFR/tG/4iFTigObqyI8QE6O9JVxwuvIyEX6RXKbJe+wkulv5taSnWt Ne94950i10MrELtNreVdi8UbCbXiqjg0r5sKI/WTJ7Bc7WsC7X5PhWlhcNrbHyBT Ivhoypkui3Ky8gvwWqL0KBG+cRp8prBXAdabrD9wRbz0TKnfGI6pQzseCGRnkE6T mhlSJpsSNIHaejoCjk93yPn5oRiTNtPMdVhMpEQL9V/crVRGRRmbd7v2TYvpMHVR JaPZ8bv+C2aBTY8uL3/v/rgrjsMKOYFeaxeNklpErxrknsbgb6BgubmeZXDvTBVv YUIbAkvveonUKisv+kbD8L7tp1+jdbRUT0AikS0NVgAJQhfArOmBcDpTL9YC51vE feFhkVx4A32vvOm7Zcg9A7IMXNjeSfccKGw3dJOAvzgDODuJiaCG6S0o7B5Yngze axMi87ixGT4QM98z/I4MC8E9rDrJdIitlpvb6ZBgiLzoO3kmvsIZZKt8UxWqf5r8 w3U2HoyKH13Qbkn1xkum =mkyb -----END PGP SIGNATURE----- Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ... |
||
Linus Torvalds
|
43d012099f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - a new driver for STM FingerTip touchscreen - a new driver for D-Link DIR-685 touch keys - updated list of supported devices in xpad driver - other assorted updates and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits) MAINTAINERS: update input subsystem patterns Input: introduce KEY_ASSISTANT Input: xpad - sync supported devices with XBCD Input: xpad - sync supported devices with 360Controller Input: xen-kbdfront - use string constants from PV protocol Input: stmfts - mark all PM functions as __maybe_unused Input: add support for the STMicroelectronics FingerTip touchscreen Input: add D-Link DIR-685 touchkeys driver Input: s3c2410_ts - handle return value of clk_prepare_enable Input: axp20x-pek - add wakeup support Input: synaptics-rmi4 - use %phN to form F34 configuration ID Input: synaptics-rmi4 - change a char type to u8 Input: sparse-keymap - remove sparse_keymap_free() Input: tsc2007 - move header file out of I2C realm Input: mms114 - move header file out of I2C realm Input: mcs - move header file out of I2C realm Input: lm8323 - move header file out of I2C realm Input: elantech - force relative mode on a certain module Input: elan_i2c - add support for fetching chip type on newer hardware Input: elan_i2c - check if device is there before really probing ... |
||
Linus Torvalds
|
2ceedf97ae |
dmaengine updates for 4.13-rc1
- removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZYG73AAoJEHwUBw8lI4NH+DoP/1f0TsYrQFCjNqa4nybjU1Sd bbqnpouuJscwt8Qk2LGuSimi0QG91gQOLvrmueFbXtEg86nPOfa0RnWGNF4qwYFK oliDlXF2PnV65J5kl7CvqXCj6bFiXCULVdO9JD2HFoFB1+lzXN9JQqOG5ne29BQ6 g3HNRlUTXNzQXWisgbAOLxuuvyfv68Zo3wCLYLkd4vC/C4zmxM+KXUG8+s0hS7t3 AOUpYW6F/C+y1Ax+SiACm0QGNZ4rc6/+ZUIIXUO5CfTYGjv6QUdzxiLHtc4br25l 2CoN9IP4V/OxHaW9T1jA61TeAAFr63oXYfDMBBzclzVryZRAIU72ups31uRQXpFz 99zUQ0OsdOCvy0oPInhNd8u+cpyh/4e2RDgSZ9rxw3xVaKFh8lsw5OtcCBQzCMeI xgFCUBHsLjEi4uafJcl6n2T7+Y4Y0KgOmxPHZo3tpq/2a5M6tVy8k68m3afCQylF 1SOxzVZdDRUutPpviQWop6RgP0EcVuzaUJ0vO4nat4j77vuimaPqdk+oLV46XP2d 5I52kcvbVI4BbJavTjVs3FRdcez0pW37iOw+5MOxHE3dnBp4X/3btFzBY4aOsdg0 wVut3B+9U4WHDBF2ConBxxMvGqMYmcssOQ096GdC6oBHHS7x6n7tEVPiZ5iUacn5 LB8k9AZtpBC7nUWPH7FS =srPZ -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ... |
||
Brian Norris
|
ef32476f26 |
This pull request contains the following core changes:
* addition of on-ecc support to Micron driver * addition of helpers to help drivers choose most appropriate ECC settings * deletion of dead-code (cached programming and ->errstat() hook) * make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) * change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag * support exiting 'GET STATUS' command in default ->cmdfunc() implementations * change the prototype of ->setup_data_interface() A bunch of driver related changes: * various cleanup, fixes and improvements of the MTK driver * OMAP DT bindings fixes * support for ->setup_data_interface() in the fsmc driver * support for imx7 in the gpmi driver * finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) * fix "bitflips in erased pages" handling in the ifc driver * addition of PM ops and dynamic timing configuration to the atmel driver And as usual we also have a few minor cleanup/fixes/improvements patches across the subsystem. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZWi1RAAoJEGXtNgF+CLcA9ukP/jpyodKn1pTyVKhAfWlx3I01 VMS8Pns6VxfSojLA2JEhPR7rd+M0G8ZKPb+odKXxWmZXoH+1iAWWBv5LjkNXrwpP ajwpkVkSU5N0FI4QX6AOX5H5kUJAq5yWh+uzLO3e/0yBAdZs6Q5msemzDIdDqr22 1J/1wUND7unGCreQ2KQGbni2es3+Lm7WDWbhc77v4bZ6yI+nDiHFeLE45CTdnG0L dzqSsHjSJ7mGVBSZIIlGhgemhinw9OD1prXOigmT9tnEyBBolrelDdWtaT3ncn+K //TlFZFd+qRIuOCRL5j+kqM0JLSyZbhsvYpfCKtnGkAw+hUqMZQuKb+V8HS2ZvnY 6Xsbh8AZxHc8rC2hmYCj4SI8N48Y4dVDxC40UBp3TRu2qMv5u4YMQV5jhA/53s05 AlvWQlpgIUyiinV5IyhwhikF9foCvCkyKKqB9MRJgXsQlfbBQe1c1ffZhIyen6ZM 6+Uca6ul8pINj1q/P749GzbK5F9aymZMidiineykS3EBcytXW1yXtIHOVy9jwjIU +iLRDkH+Vl1dT/cOa5jm5hXgOkNggrYmtG+NzKLa4RRXrtO1yo3uocSUl49XYk4C OO+BeKLPs+Ffm0OnYBIOJTyywR1jRS8DCUTqg8qRjzMFVuAlbEHJ9YE/hg5IvKZK mgFm4rHa/460DPscBMCB =INC7 -----END PGP SIGNATURE----- Merge tag 'nand/for-4.13' into MTD From Boris: """ This pull request contains the following core changes: * addition of on-ecc support to Micron driver * addition of helpers to help drivers choose most appropriate ECC settings * deletion of dead-code (cached programming and ->errstat() hook) * make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) * change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag * support exiting 'GET STATUS' command in default ->cmdfunc() implementations * change the prototype of ->setup_data_interface() A bunch of driver related changes: * various cleanup, fixes and improvements of the MTK driver * OMAP DT bindings fixes * support for ->setup_data_interface() in the fsmc driver * support for imx7 in the gpmi driver * finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) * fix "bitflips in erased pages" handling in the ifc driver * addition of PM ops and dynamic timing configuration to the atmel driver And as usual we also have a few minor cleanup/fixes/improvements patches across the subsystem. """ |
||
Linus Torvalds
|
6972b007ca |
Merge (most of) tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones: "New Drivers: - Intel Cherry Trail Whiskey Cove PMIC - TI LP87565 PMIC New Device Support: - Add support for Cannonlake to intel-lpss-pci - Add support for Simatic IOT2000 to intel_quark_i2c_gpio New Functionality: - Add Regulator support (axp20x) Fix-ups: - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec) - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core) - Provide deregistration on unbind (rn5t618) - Rework DT code/documentation (arizona) - Constify things (fsl-imx25-tsadc) - MAINTAINERS updates (DA9062/61) - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C) - Switch to DMI matching (intel_quark_i2c_gpio) - Provide an appropriate level of error checking (wm831x-{i2c,spi}, twl4030-irq, tc6393xb) - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc, stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc, exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099, motorola-cpcap)" [ Skipped the last commit in that series that added eight thousand lines of pointless repeated register definitions. - Linus ] * tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits) mfd: Add LP87565 PMIC support mfd: cros_ec: Free IRQ on exit dt-bindings: vendor-prefixes: Add arctic to vendor prefix mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: axp20x-i2c: Document that this must be builtin on x86 mfd: Add Cherry Trail Whiskey Cove PMIC driver mfd: tc6393xb: Handle return value of clk_prepare_enable mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency mfd: motorola-cpcap: Use devm_of_platform_populate() mfd: smsc-ece: Use devm_of_platform_populate() mfd: qcom-spmi-pmic: Use devm_of_platform_populate() mfd: palmas: Use devm_of_platform_populate() mfd: exynos: Use devm_of_platform_populate() mfd: fsl-imx25: Use devm_of_platform_populate() mfd: cros_ec: Use devm_of_platform_populate() mfd: atmel: Use devm_of_platform_populate() mfd: stm32-timers: Use devm_of_platform_populate() mfd: intel_soc_pmic: Select designware i2c-bus driver ... |
||
Linus Torvalds
|
c7d28eca1d |
This is the bulk of GPIO changes for the v4.13 series:
Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZX1MjAAoJEEEQszewGV1zEYUQALFsjJH7D2mRN4TSSEeVAcYr Uz52uupsou8tgW0IupRb/khO+V6zgd7j+kHDJLMxX+rCTw3pTq5+XGyi5+iNpxof TIIT1XBx4eq7Q/n4nWdGodHbHN9BXw7cGsNmTb1TS/G/6h1wOKxfzjvUNhDAC+2v idPy6B5G+WrDsYpBtTWlKHKQKVqbUlhLFyJYoglzqIeM5L9Ry/UoZ6sGleho3hKn Vlg/hMtkCexnVO9zopBe5CuEfseLrkcCgCvtQ713egzVXApryp4hqm3Xti20Ntgy OxnKhmVyloqd0kU0qLSpvDAf7B1invbHHbeZsag6wluTMrxgUYJONuonrqGeGiwB FBDtw9SGn2GlEXcs7sg8ANmAyr2XxxezKXD9XLBL5jadNB2KCY5yKMv1IK3VnYdq gEpFAiZ5cmlpZxIXqlyeZP6LKHNTci4amb33x1I/ghH2BTkGQ/3E3anXEbPNWF8G DDE6nrSgU0oQcNqRHyZaWNZpUIz4aFUgJtOEO4lYYP4+VzYSKTdrHseTiiJ91J7E WBz9p5JvSnB22+60RhyTAPjVjXgWa30nidf7WGCK0UHiIYffihCxGZRTlrhoEEUB fXgveJpqxLopYvxpUxi1OqlPYYo7zKRF5BzHsjKMpdVYXfdMdvs7eq2g/X889i1D WpbE9LyAH9FY5BM8YjFX =TpW1 -----END PGP SIGNATURE----- Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ... |
||
Linus Torvalds
|
dddd564dbb |
This time we've got one core change to introduce a bulk clk_get API,
some new clk drivers and updates for old ones. The diff is pretty spread out across a handful of different SoC clk drivers for Broadcom, TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the introduction of new drivers. Core: - New clk bulk get APIs - Clk divider APIs gained the ability to consider a different parent than the current one New Drivers: - Renesas r8a779{0,1,2,4} CPG/MSSR - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl - Qualcomm IPQ8074 SoCs - Cortina Systems Gemini (SL3516/CS3516) - Rockchip rk3128 SoCs - Allwinner A83T clk control units - Broadcom Stingray SoCs - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs Removed Drivers: - Old non-DT version of the Realview clk driver Updates: - Renesas Kconfig/Makefile cleanups - Amlogic CEC EE clk support - Improved Armada 7K/8K cp110 clk support - Rockchip clk id exposing, critical clk markings - Samsung converted to clk_hw registration APIs - Fixes for Samsung exynos5420 audio clks - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJZXujtAAoJEK0CiJfG5JUl8vIQAKbcH3rX+CS4jrg7Hs2Ghnhn ZbTf7vZYa6K7iuL7JHITEScAQ8+l0Bl7eWSfJZRt4oUW3Jt4F+AIs8qBofZAWn4M m+kDHs/IfAUITZp/unM/ogFfVcboZObjAK/A2yyRVyMxRkIyyUb6r7SDVpCpGyxU 1YDAdis2M3F5J9CGV/tpmobnksMUlCnJlI0OGtMUnvY6mDkf8Re89sayMnQ/1Mgp CL1YwnqZ0L6rT664IMo74bB7UNjXdMZsuCeITkU+hMVq4NMXErKCcn8lHvP9P+uP AoZ8bf9WaQ/CglGFeeFrNQGUf+tiTlYxlVvvNFXR5+rmhu/yKxNI67APaupeERVl jMISKAC/A+C1j6JVMCqjM3d75F47SzuZQuQY0ZD0DWoqP9PBzV6IyThHIqWrN5O4 IceLmD8BrwW+h8bs2SIubIygOGMMqGhVi2XaAAWpmRke7JzmSFOOyE3YGPisaBAq EcIF2i2jJ6Ja4rClgfQKOsx25MOILsIp/sMU6iC7U1h4NDj8yP5A13n60U6DuZhu ttjN+bXugR81R+bWyzC6Zl/KXF83Ka3ZSJs+XblunPRGKt2q6Kj12HBspkWL1QjY aLEEg3fpI/ovQoTMXHj7/G1MD60rxoHCuOjBwSWEQBzA1MiHol+ab/mZKfPsy50C 116G1XJgtgrLxE00iZ6K =Yar+ -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we've got one core change to introduce a bulk clk_get API, some new clk drivers and updates for old ones. The diff is pretty spread out across a handful of different SoC clk drivers for Broadcom, TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the introduction of new drivers. Core: - New clk bulk get APIs - Clk divider APIs gained the ability to consider a different parent than the current one New Drivers: - Renesas r8a779{0,1,2,4} CPG/MSSR - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl - Qualcomm IPQ8074 SoCs - Cortina Systems Gemini (SL3516/CS3516) - Rockchip rk3128 SoCs - Allwinner A83T clk control units - Broadcom Stingray SoCs - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs Removed Drivers: - Old non-DT version of the Realview clk driver Updates: - Renesas Kconfig/Makefile cleanups - Amlogic CEC EE clk support - Improved Armada 7K/8K cp110 clk support - Rockchip clk id exposing, critical clk markings - Samsung converted to clk_hw registration APIs - Fixes for Samsung exynos5420 audio clks - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits) clk: gemini: Read status before using the value clk: scpi: error when clock fails to register clk: at91: Add sama5d2 suspend/resume gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K clk: keystone: TI_SCI_PROTOCOL is needed for clk driver clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL clk: uniphier: provide NAND controller clock rate clk: hisilicon: add usb2 clocks for hi3798cv200 SoC clk: Add Gemini SoC clock controller clk: iproc: Remove __init marking on iproc_pll_clk_setup() clk: bcm: Add clocks for Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC clk: mediatek: export cpu multiplexer clock for MT8173 SoCs clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work clk: renesas: cpg-mssr: Use of_device_get_match_data() helper clk: hi6220: add acpu clock clk: zx296718: export I2S mux clocks clk: imx7d: create clocks behind rawnand clock gate clk: hi3660: Set PPLL2 to 2880M ... |
||
Bjorn Helgaas
|
6aed468480 |
Merge branch 'pci/host-tango' into next
* pci/host-tango: PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile |
||
Linus Torvalds
|
dd6ec12f3b |
DeviceTree for 4.13:
- vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJZXpNsEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcO2gg// VxhXDs6+oTkBCUzVtEHue/yv44q8Sa7M3jY3/VqVSLa3Eopp/4dmDgBAtWYYX2ou KfUl0+yD4cSKhw6oxycwsaS61zf8JkM4sbXYQTphty/5lwxq0/i3OGj98Uk9w9JH kM+b1Wi7Z6GBzqh1GuS4E+ADSktMadxd0LugXZvDEMVQZusv/nzWxzq/bdMUqW19 0nvBL9ABRAPirhBuMSWpYlEEkwQn7JF3LO3i8IBDhhFzMsvbfR7cTp+ydt6I2pk8 h8DxlsaPIOWH5KePNEmzsd1VlV/HcNl7/vZb0ev0Eb94TLHJRJ7V0ZMQxc5vxHgN x6aMlBLHGzG6LI5CV30pWAD/qrrtXNbqmlj1Qjd+FXen6NuQSngSfo5aXzXrM6X5 ZUD7ou9KzYObraOarU6w2qSICok85bGQHOiBQDVTmE4E/4AVscnc1VQi/rTHrt2O Yt3AV8iwaum8q2PVOVKdy8tu7x/7BzBdSObYtjjMIuWcrInnlIyUkmehtCl38kqV fd6OIVEOhTJTr0CYDiXEbKtG81j7JhoREdVZvzcEhWFGt/98Rjc9tkTihhFzky4m D6lpzpf8mvemrBiMegyQbhVcfHyo0fJe+6giV7cssf2Xhe1QkC15UXywbccO7xFJ nf3yqCl8YVEPG0l1MrR+YEHHcnr4ZIEZpejOv+SzZeg= =DNwf -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ... |
||
Linus Torvalds
|
21c19bc7ee |
Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar: - Minor improvement : avoid requiring unnecessary startup/shutdown callback that many drivers seem to not need - New controller driver for Qualcomm's APCS IPC * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Introduce Qualcomm APCS IPC driver dt-bindings: mailbox: Introduce Qualcomm APCS global binding mailbox: Make startup and shutdown ops optional |
||
Linus Torvalds
|
f72e24a124 |
This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me) -----BEGIN PGP SIGNATURE----- iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlldmw0LHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOiKA/+Ln1mFLSf3nfTzIHa24Bbk8ZTGr0B8TD4Vmyyt8iG oO3AeaTLn3d6ugbH/uih/tPz8PuyXsdiTC1rI/ejDMiwMTSjW6phSiIHGcStSR9X VFNhmMFacp7QpUpvxceV0XZYKDViAoQgHeGdp3l+K5h/v4AYePV/v/5RjQPaEyOh YLbCzETO+24mRWdJxdAqtTW4ovYhzj6XsiJ+pAjlV0+SWU6m5L5E+VAPNi1vqv1H 1O2KeCFvVYEpcnfL3qnkw2timcjmfCfeFAd9mCUAc8mSRBfs3QgDTKw3XdHdtRml LU2WuA5cpMrOdBO4mVra2plo8E2szvpB1OZZXoKKdCpK3VGwVpVHcTvClK2Ks/3B GDLieroEQNu2ZIUIdWXf/g2x6le3BcC9MmpkAhnGPqCZ7skaIBO5Cjpxm0zTJAPl PPY3CMBBEktAvys6DcudOYGixNjKUuAm5lnfpcfTEklFdG0AjhdK/jZOplAFA6w4 LCiy0rGHM8ZbVAaFxbYoFCqgcjnv6EjSiqkJxVI4fu/Q7v9YXfdPnEmE0PJwCVo5 +i7aCLgrYshTdHr/F3e5EuofHN3TDHwXNJKGh/x97t+6tt326QMvDKX059Kxst7R rFukGbrYvG8Y7yXwrSDbusl443ta0Ht7T1oL4YUoJTZp0nScAyEluDTmrH1JVCsT R4o= =0Fso -----END PGP SIGNATURE----- Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ... |
||
Linus Torvalds
|
e0f25a3f2d |
hwspinlock updates for v4.13
This introduces a driver for the Spreadtrum hardware spinlock device and cleans up the Kconfig file. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZXXheAAoJEAsfOT8Nma3Fy1cP/238E4FI3VNUY+AKYBZyHOV+ 38FZRqAG9BGtv5crH6TNCFiQNpP7aFidu9tKmYqHykHCMfJFEyKXprHd2mPAOq2h fat82w6SS9caXdtDhzw+OEzn17xFqAiybydXJ+RrqEVSkXfm69r9/apjvgIXdZeZ SVPab1ofInLEAPkci6lD+XrIzbc1+N/+sO5ZBEGPWVShdbBupIIkJpV0UsNQJOuO mzDn4bjl+EhXxMK3v7JfZ/kRtenBBzj/qYn2Mm/6g8Ytoui0GDQUlyrkTz8A3XQ8 JSxluzWnNAtc4AFXkctsoGe6CsOOiSKHoQEIa2/FV/XwRaU8MZpY7ofLuLwOHmDP H/qAIsl9cXBGNBuXZ5HEB4BzqtsgfwpBcFaWX0zFdVFDlwznd11R6IxJIPdZ13xp z30toStxKvUy1iH9K4iiekvvbdNN1atytbnQakpW6vJisevFdST6ceDFbjWaAFoL O+mnFWeV3aRMRtDxJWI1IiDUJ6GS0O9rTHqKoRqHH69lrm8RTMMG6eMLFmD9U5qM QfjwITQecrqVntAK+667I6U3oTCGLiIttm7kSDDFAcH2yn9n4TmP5WYLZvO9EoLH Mf5uEev060mUJAXfibbWC6Gp9dmRH0M7zw2jTx1FbmST+8s8kGS12d3pY9eBkJk2 oIXLPY5Gf9D2vs0Ov9bT =YiJ+ -----END PGP SIGNATURE----- Merge tag 'hwlock-v4.13' of git://github.com/andersson/remoteproc Pull hwspinlock updates from Bjorn Andersson: "This introduces a driver for the Spreadtrum hardware spinlock device and cleans up the Kconfig file" * tag 'hwlock-v4.13' of git://github.com/andersson/remoteproc: DT: hwspinlock: Add binding documentation for Spreadtrum hwspinlock hwspinlock: sprd: Add hardware spinlock driver Make HWSPINLOCK a menuconfig to ease disabling |
||
Linus Torvalds
|
9a6293c321 |
remoteproc updates for v4.13
This introduces the Keystone 2 DSP driver and refactors the start/stop code in recovery. The Davinci DSP driver gets a few fixes and the Kconfig gets cleaned up. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZXXbhAAoJEAsfOT8Nma3FPPQQAKCGONJEcmITLuOxKvQLZa7z 18lfJK7xbXM3S5OYwSoOy2vkUsWnFVxLNq3fJhJ3YjnA4vkDExzM5tBWncZ9JrEj EU8Q0K8ArgA0LaQLlgJegEFR/ZW4vs4FFMeb8+EJUGfY8gR5PtdrCT3Tx5fu++p5 c9irv0tXb8IJxOi8gOTNd3nOEQM3+zXCZnfu3HCwOeVpv/1qH9/L42nwbZh6nY2u 7LvklFnDqouv6qiwxc7T+GfxVDPhUUjnUQB3Tsdz+6aOuaRZjYnFKF4prSlqRQnx +18qi3PLuuCprUvEAsNcsFefMqTflCNPvSGcaPuW2I+lF0mnNoKWAwY2iARVIlAy g5krGlkVIndBWRSdluDWuuYMPTNLqbFgfaYQSpsLlPseYFV30UmXJvEABpa4vY1b bBJaYVBtlcl9GWzng5mY/szVLFMzIbadJ81kg2ddaSpLnDSn0a8+xjxwpqDHQS3y 9SxP0Hynh8cbsfwLyBRQ4RC9n8cZ4KyyoIObcglSQtzrmBxxK2MGJ/RyZ3AulmHx YdnWyNAwBa+fzbtyHENHHtE85zTkFV7iGutOibZPsFO9SRyIINbPaKGKicGUswB5 SZKVNLPPLqI8fwO2MBRM4fIrm40hrUbpMwX5S6sVJ86Fv4yIDfxYvQgLaHSLbyCX nDWWhcBjQINgR+UbUFfm =rz64 -----END PGP SIGNATURE----- Merge tag 'rproc-v4.13' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This introduces the Keystone 2 DSP driver and refactors the start/stop code in recovery. The Davinci DSP driver gets a few fixes and the Kconfig gets cleaned up" * tag 'rproc-v4.13' of git://github.com/andersson/remoteproc: remoteproc/keystone: Fix circular dependencies for ARM configs remoteproc: Drop redundant REMOTEPROC dependency from driver Kconfigs remoteproc: Drop VIRTUALIZATION dependency from REMOTEPROC remoteproc/keystone: Ensure the DSPs are in reset in probe remoteproc/keystone: Add a remoteproc driver for Keystone 2 DSPs dt-bindings: remoteproc: Add Keystone DSP remoteproc binding remoteproc/davinci: fix unbalanced reset between start and stop ops remoteproc/davinci: simplify the reset function remoteproc/davinci: Update Kconfig to depend on DMA_CMA remoteproc: fix spelling mistake: "Resouce" -> "Resource" remoteproc: Modify recovery path to use rproc_{start,stop}() remoteproc: Introduce rproc_{start,stop}() functions |
||
Linus Torvalds
|
426b8eeb05 |
rpmsg updates for v4.13
This introduces the Qualcomm GLINK protocol driver and DeviceTree-based modalias support, as well as a number of smaller fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZXXVMAAoJEAsfOT8Nma3FQQgP/3J8RiSyURi5EUKs59LBHQ6Z hpQgsxa0idTY4AbS6phUiBMxyxSSJltGn/8hjlddixp/iiaqSv3z+d5zHRiyOsHt TiOYkE5z8HvG/i/fA9+ZFCeTakqeq9qWhyYEJ0r1j49le4iWRPwQ0NGHxNhyTZJZ dTPIC4C5FJPl5LEyeU5ZTzLTtPWZKu2+Ll5xB8vZz6qmU2aQMdX4XL30sbgdXB9y Xg04AYTYrphoTLT7y7wKJ3/acZyJDZp+6kfr1mMvZttZiGZJLbaAN3+jlLvAqO25 NMZzTsBW6sCfWhh/v/IP7AVIYde6yzTfvcj7z9Z0RFb/QdFA691Y6dxLbJtSmVGR FRCq739NKmvbe3l3xWdMSXOcSMZng534u/Ws/p6orUNzCrBHAcc0f9Qz5URIXo8R tw5/IZwUurBDlAIJeBJM/AKWj75C7Wxuy1SUcG7ks3NyKejCM2Pl+Y2gwWOSXvJj 0slS1EnUmiypT5dR4IJXYni34eP0yfXtwfxHuUPZvcaLCpdbSMRULAubGpgcOOT0 d/lFv29UDudh7vxEqV2tEcEk5NVvcAuwsGytZddxFOGU1tCsrLa/BMBiiA3aKn5S sS5puLXPwl3ndwQV8Kr+48LjepQ44UoVvlh9edZUKVcaeDUDRM7WOvPyVUE9Rc+C UMPkHyvD/sYPaDRhXyTD =rhfx -----END PGP SIGNATURE----- Merge tag 'rpmsg-v4.13' of git://github.com/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This introduces the Qualcomm GLINK protocol driver and DeviceTree-based modalias support, as well as a number of smaller fixes" * tag 'rpmsg-v4.13' of git://github.com/andersson/remoteproc: rpmsg: Make modalias work for DeviceTree based devices rpmsg: Drop VIRTUALIZATION dependency from RPMSG_VIRTIO rpmsg: Don't overwrite release op of rpdev rpmsg: virtio_rpmsg_bus: cleanup multiple assignment to ops rpmsg: virtio_rpmsg_bus: fix nameservice address rpmsg: cleanup incorrect function in dev_err message rpmsg: virtio_rpmsg_bus: fix announce for devices without endpoint rpmsg: Introduce Qualcomm RPM glink driver soc: qcom: Add device tree binding for GLINK RPM rpmsg: Release rpmsg devices in backends |
||
Amelie Delaunay
|
d2be279bcd |
dt-bindings: rtc: stm32: add support for STM32H7
This patch documents support for STM32H7 Real Time Clock. It introduces a new compatible and rework clock definitions. On STM32H7 we have a 'pclk' clock for register access, in addition to the 'rtc_ck' clock. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
Linus Walleij
|
7f1e988dff |
rtc: gemini: Augment DT bindings for Faraday
The Gemini RTC is actually a standard IP block from Faraday Technology called FTRTC010. Rename the bindings, add the generic compatible string and add definitions for the two available clocks. Cc: devicetree@vger.kernel.org Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
Linus Torvalds
|
ac7b75966c |
This is the big bulk of pin control changes for the v4.13 series:
Core: - The documentation is moved over to RST. - We now have agreed bindings for enabling input and output buffers without actually enabling input and/or output on a pin. We are chiseling out some details of pin control electronics. New drivers: - ZTE ZX - Renesas RZA1 - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree to use this pin controller and consolidate earlier spread out code. - Microschip MCP23S08: this driver is migrated from the GPIO subsystem and totally rewritten to use proper pin control. All users are switched over. New subdrivers: - Renesas R8A7743 and R8A7745. - Allwinner Sunxi A83T R_PIO. - Marvell MVEBU Armada CP110 and AP806. - Intel Cannon Lake PCH. - Qualcomm IPQ8074. Notable improvements: - IRQ support on the Marvell MVEBU Armada 37xx. - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM. - Rockchip driver now supports iomux-route switching for RK3228, RK3328 and RK3399. - Rockchip A10 and A20 are merged into a single driver. - STM32 has improved GPIO support. - Samsung Exynos drivers are split per ARMv7 and ARMv8. - Marvell MVEBU is converted to use regmap for register access. Maintenance: - Several Renesas SH-PFC refactorings and updates. - Serious code size cut for Mediatek MT7623. - Misc janitorial and MAINTAINERS fixes. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZXeUhAAoJEEEQszewGV1zcl8QAMZ6To2JBQeK0Qi+pik9ZbW7 CvnIFT7E4X45tstwFNKIgdQ1C/IcfzKpPSUDRUqi2nWJiWcuYgn3wQwQ5qbkGtaG vne0KVChgFGkT2SwycUZy11JxuP75U73e27BwAruxHhwWo5PesUOjjkmUtMqdbNQ VAwx6KoCBx1VBlb0uscbSSqFyAspdyeAHPEvSj4IpsqRZzT7YFqDm4C+uTnwavPx ZLoTji0HCpPIAo4C8JUAvweWbpxMC1IMdfm9jRkZ4rR/gTFQXvK+9ssI6lxSK6a6 RiCJaAE6wQHKYm4LL0pGbW+aMGWRRRp8MERNmg8NgnWONcfCxYowoOYeYLeqPhAg kWkFHlmjpfo/A79V6tmN32vCpeQd34XGCetMpI93TuZ42olniD2Puv6RscVaSP3T 3mIqydX9BY8iAviyMaLcHQeChaNdhLQi+AVjrn1VQjdkWn0C7uR++JznsyaxaI+S cVadl6k8H393R1Qdvh3JdoL0owsntQxWVWCbR6fyAZTHHiLGEyvL1ceO/rbpSRrn c8Ghk5s7f3DFltn7yWiV4k3KVhDPb5iK2dYP9uGCgqbigHWqlcB5PanRu1aGSFov h/1VFEMagNCXQCrgGcIfmkEiwW3SqUsFaaoMLhlYpNb/ON3ihGgsZYiczWSj8l4L yfCOoszuEsVkV1dFNAjA =dUFL -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.13 series: Core: - The documentation is moved over to RST. - We now have agreed bindings for enabling input and output buffers without actually enabling input and/or output on a pin. We are chiseling out some details of pin control electronics. New drivers: - ZTE ZX - Renesas RZA1 - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree to use this pin controller and consolidate earlier spread out code. - Microschip MCP23S08: this driver is migrated from the GPIO subsystem and totally rewritten to use proper pin control. All users are switched over. New subdrivers: - Renesas R8A7743 and R8A7745. - Allwinner Sunxi A83T R_PIO. - Marvell MVEBU Armada CP110 and AP806. - Intel Cannon Lake PCH. - Qualcomm IPQ8074. Notable improvements: - IRQ support on the Marvell MVEBU Armada 37xx. - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM. - Rockchip driver now supports iomux-route switching for RK3228, RK3328 and RK3399. - Rockchip A10 and A20 are merged into a single driver. - STM32 has improved GPIO support. - Samsung Exynos drivers are split per ARMv7 and ARMv8. - Marvell MVEBU is converted to use regmap for register access. Maintenance: - Several Renesas SH-PFC refactorings and updates. - Serious code size cut for Mediatek MT7623. - Misc janitorial and MAINTAINERS fixes" * tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits) pinctrl: samsung: Remove bogus irq_[un]mask from resource management pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static pinctrl: rza1: Remove unneeded wrong check for wrong variable pinctrl: qcom: Add ipq8074 pinctrl driver pinctrl: freescale: imx7d: make of_device_ids const. pinctrl: DT: extend the pinmux property to support integers array pinctrl: generic: Add output-enable property pinctrl: armada-37xx: Fix number of pin in sdio_sb pinctrl: armada-37xx: Fix uart2 group selection register mask pinctrl: bcm2835: Avoid warning from __irq_do_set_handler pinctrl: sh-pfc: r8a7795: Add PWM support MAINTAINERS: Add Qualcomm pinctrl drivers section arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header dt-bindings: pinctrl: Add RZ/A1 bindings doc pinctrl: Renesas RZ/A1 pin and gpio controller pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups pinctrl.txt: move it to the driver-api book pinctrl: ingenic: checking for NULL instead of IS_ERR() pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20 pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11 ... |
||
Linus Torvalds
|
4f5dfdd290 |
LED updates for 4.13
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJZXUGpAAoJEL1qUBy3i3wmBdgP/jhpBsA9D+W4grLEzbTSTWSV GKm19egbgujyLWkTecs1ICtuPYQFI90xV2HqmoSsXa9BEZHErB7zbubBzPEqS4RW ghsqweaLllOe6LtHs/ZvgvTGILaivpvK1R9qawaqJi6Cmg0VZvG8ApQNNpQD6bnj YCknKetLK+pdcjVCTaG7hyf+Ess7ASrwiWwIBiU26K+X6p7YpilxT5AylYWH6erl s+Lr3U0As86Fj+/ELOgmYBMTO1phZ7r1FSR/sa7RTlfgEgJQxmgagCfAvPGH92K3 gK0UKKKirzfU08nUliHeHqn1K9ZaTKS15bbRNHpzl3/be/oLCuN3kB/Y/ZWtPgOc pEaCkWn2+4TeChlznyEmmTAeJgKLOBlt8ffSlz+wWNNL9wjG/LVm0Gq/eO49rWsG fJVbAT/lnWQ5dVEXlzQbw4uKU8DZDpjChjkv7shLMcValUtysnJ/w3edl5Czyx0y s2ckFmWnmQwTd+//PoJYnfdywPc3NfpsJD2j2VrEc0unsodAszwrdHdFVmsSgAJY u6cbrrxWYakXUcV/6gKVybhdMpNsV4f2KDthxrZmN3JGetQU/zoNsMBrNJu30l3d Iifry+UlYNHoozITKyk1+J3atEF6YzMIhuJTP1ifN07tvo5WaSESPFuoJdxLFlyt 4OZcjjWj+CGqZ6+RSUya =5JLc -----END PGP SIGNATURE----- Merge tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "This time we're removing more than adding: Removed drivers: leds-versatile: - all users of the Versatile LED driver are deleted and replaced with the very generic leds-syscon leds-sead3: - SEAD3 is using the generic leds-syscon & regmap based register-bit-led driver LED class drivers improvements: ledtrig-gpio: - use threaded IRQ, which both simplifies the code because we can drop the workqueue indirection, and it enables using the trigger for GPIOs that work with threaded IRQs themselves - refresh LED state after GPIO change since the new GPIO may have a different state than the old one leds-lp55xx: - make various arrays static const leds-pca963x: - add bindings to invert polarity" * tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: lp55xx: make various arrays static const leds: Remove SEAD-3 driver leds: trigger: gpio: Use threaded IRQ leds: trigger: gpio: Refresh LED state after GPIO change leds: Delete obsolete Versatile driver leds: pca963x: Add bindings to invert polarity |
||
Linus Torvalds
|
0b49ce5a40 |
media updates for v4.13-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZXN2xAAoJEAhfPr2O5OEV9jgP/02n4XamK8Y4wZdY7FjyAg66 IMYoz9J6VUWkKRVfGmtifmR5PWBW4XE4t6G3ksVnlMUP4XunEXec2gLmFkVsWSDz gpsK8C1E3RskzeY7dRqbIldoM+oiPYYcMNMQl+WpFs7JZyjlANEbkUSPZvjcUIlP s6U0bnBoFU35q0zoBcamvyuguIxjVceVYfpgXKHYYhPunzcvlJe4wQE1gOsMN1Pc /ncr3KFz5H6WsdcUGXAz/0z0tj6pPUWiUFQwAo0TaefON22tPpdn6J/2srtfA0Xc Vjlkh5DTT96dcTPQgGsYMuMaeB209I4dYtn3aBj/8UCBUjfAo3u9j9mHp0fReT8D CVsQQsAxxj+bHhXlRnCJL7w1X6kFnXnsWD3/EQU4r6zC6adj/7tNFqlkh2d8lL/k QMIUmhHe5bln/aQI52hDKV43AgujlrdCFxmMu9fblc8slMSyfOk6fc/2AuTLTXXX R+j2rp6HRVetlK+6IkmXcFfs3LCgSiLp9qXxYgKrNh1wbqBFb+0yXPnpf3N6pTRH AGSEvGWD5XUVEIuRq10A5XEEdHdgqLBcovEiu7nqoPKNfVVSt9kXnHqPUjlvqw/7 kIFO31Ah/q0XGhyTZLwiOXL34vBxy6VRt8afS+eZ6hhjmxZ97tHJNvnu5mDcVxzF AyMrURPJiEhR0xfkIudo =RtxO -----END PGP SIGNATURE----- Merge tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - addition of fwnode support at V4L2 core - addition of a few more SDR formats - new imx driver to support i.MX6 cameras - new driver for Qualcon venus codecs - new I2C sensor drivers: dw9714, max2175, ov13858, ov5640 - new CEC driver: stm32-cec - some improvements to DVB frontend documentation and a few fixups - several driver improvements and fixups * tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (361 commits) [media] media: entity: Catch unbalanced media_pipeline_stop calls [media] media/uapi/v4l: clarify cropcap/crop/selection behavior [media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handling [media] vimc: sen: Declare vimc_sen_video_ops as static [media] vimc: sca: Add scaler [media] vimc: deb: Add debayer filter [media] vimc: Subdevices as modules [media] vimc: cap: Support several image formats [media] vimc: sen: Support several image formats [media] vimc: common: Add vimc_colorimetry_clamp [media] vimc: common: Add vimc_link_validate [media] vimc: common: Add vimc_pipeline_s_stream helper [media] vimc: common: Add vimc_ent_sd_* helper [media] vimc: Move common code from the core [media] vimc: sen: Integrate the tpg on the sensor [media] media: i2c: ov772x: Force use of SCCB protocol [media] dvb uapi docs: enums are passed by value, not reference [media] dvb: don't use 'time_t' in event ioctl [media] media: venus: enable building with COMPILE_TEST [media] af9013: refactor power control ... |
||
Linus Torvalds
|
920f2ecdf6 |
sound updates for 4.13-rc1
This development cycle resulted in a fair amount of changes in both core and driver sides. The most significant change in ALSA core is about PCM. Also the support of of-graph card and the new DAPM widget for DSP are noteworthy changes in ASoC core. And there're lots of small changes splat over the tree, as you can see in diffstat. Below are a few highlights: ALSA core: - Removal of set_fs() hackery from PCM core stuff, and the code reorganization / optimization thereafter - Improved support of PCM ack ops, and a new ABI for improved control/status mmap handling - Lots of constifications in various codes ASoC core: - The support of of-graph card, which may work as a better generic device for a replacement of simple-card - New widget types intended mainly for use with DSPs ASoC drivers: - New drivers for Allwinner V3s SoCs - Ensonic ES8316 codec support - More Intel SKL and KBL works - More device support for Intel SST Atom (mostly for cheap tablets and 2-in-1 devices) - Support for Rockchip PDM controllers - Support for STM32 I2S and S/PDIF controllers - Support for ZTE AUD96P22 codecs HD-audio: - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks for HP and Dell machines - A few more fixes for i915 component binding Note that of-graph change may bring the conflicts with a later pull request of devicetree, as currently found in linux-next. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAllbtmMOHHRpd2FpQHN1 c2UuZGUACgkQbDGAVD0pKaTMkhAAnqvRvh9nYBI1E2VGtJON/AFcsF4s6xdJd0ow Bn5Kq/07rGWxAi8Cy69LM930eQrZl+xR69I7LMkC54BxVNhvhXNef7E5GXPbRi+3 l6dkBmkqvwmmHP5iiOxKtYSAnUfJitu1rmtAOVAjRh8rsWNeLuI8N8V/uilQBioi lRywdBjdylub00H1DL8cmZHbrBb4pYrL/LepTswZL3I/UZ225fMiIGFd8tXpQPwZ IKRZiuzrc3SykxSsL/aNeyxP+2qTYRtPfl/FGenKBBO2PJmGAb00yAdtQJRcD2eX Xf1alfvpNgpy/U6+C7dJgNWQvvr+lPCaFXuMukIDno/zg/xD1V1Ev/fnbVEINLve xMOnuJSGGaY6fu6eZ4Cck0VfZIj7UVA9x8zvBOKntIhq/VLfE7DDu3p9tiAZAVfH nMOLAhy+0kFyHSrv6zVWQj+cmjPwLvaW7fNWVljL5/MWuF5GJi05DUOfV/vk8BaO EnyVqe2ynzNLTsFpLHHy6XKgKtSTkPygxYSNuI7kSYAxD5qE6hXXKXTAqJ3LjDkO tGiFmxp/vHrlNvcyRjXc30th/9PPj/mRBcJ2KyjXPa63L5ZW86PiyIHKxJA4yogv y4z2ZlhIz90cZvpigFHtFqq1puVlDtKDbAaJ6AKrP8HEHUlMiPNApsSjWWBUcfzV DXzrlg0= =PUEh -----END PGP SIGNATURE----- Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This development cycle resulted in a fair amount of changes in both core and driver sides. The most significant change in ALSA core is about PCM. Also the support of of-graph card and the new DAPM widget for DSP are noteworthy changes in ASoC core. And there're lots of small changes splat over the tree, as you can see in diffstat. Below are a few highlights: ALSA core: - Removal of set_fs() hackery from PCM core stuff, and the code reorganization / optimization thereafter - Improved support of PCM ack ops, and a new ABI for improved control/status mmap handling - Lots of constifications in various codes ASoC core: - The support of of-graph card, which may work as a better generic device for a replacement of simple-card - New widget types intended mainly for use with DSPs ASoC drivers: - New drivers for Allwinner V3s SoCs - Ensonic ES8316 codec support - More Intel SKL and KBL works - More device support for Intel SST Atom (mostly for cheap tablets and 2-in-1 devices) - Support for Rockchip PDM controllers - Support for STM32 I2S and S/PDIF controllers - Support for ZTE AUD96P22 codecs HD-audio: - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks for HP and Dell machines - A few more fixes for i915 component binding" * tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits) ALSA: hda - Fix unbalance of i915 module refcount ASoC: Intel: Skylake: Remove driver debugfs exit ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h ALSA: hda/realtek - Remove GPIO_MASK ALSA: hda/realtek - Fix typo of pincfg for Dell quirk ALSA: pcm: add a documentation for tracepoints ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe() ALSA: x86: fix error return code in hdmi_lpe_audio_probe() ASoC: Intel: Skylake: Add support to read firmware registers ASoC: Intel: Skylake: Add sram address to sst_addr structure ASoC: Intel: Skylake: Debugfs facility to dump module config ASoC: Intel: Skylake: Add debugfs support ASoC: fix semicolon.cocci warnings ASoC: rt5645: Add quirk override by module option ASoC: rsnd: make arrays path and cmd_case static const ASoC: audio-graph-card: add widgets and routing for external amplifier support ASoC: audio-graph-card: update bindings for amplifier support ASoC: rt5665: calibration should be done before jack detection ASoC: rsnd: constify dev_pm_ops structures. ASoC: nau8825: change crosstalk-bypass property to bool type ... |
||
Linus Torvalds
|
109a5db504 |
Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: - Christoph added support for TCG OPAL self encrypting disks - Minwoo added support for ATA PASS-THROUGH(32) - Linus Walleij removed spurious drvdata assignments in some drivers - Support for a few new device and other fixes * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits) sd: add support for TCG OPAL self encrypting disks libata: fix build warning from unused goto label libata: Support for an ATA PASS-THROUGH(32) command. ahci: Add Device ID for ASMedia 1061R and 1062R sata_via: Enable optional hotplug on VT6420 ata: ahci_brcm: Avoid writing to read-only registers libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag libata: Add the AHCI_HFLAG_YES_ALPM flag ata: ftide010: fix resource printing libata: make the function name in comment match the actual function ata: sata_rcar: make of_device_ids const. ata: pata_octeon_cf: make of_device_ids const. libata: Convert bare printks to pr_cont libahci: wrong comments in ahci_do_softreset() ata: declare ata_port_info structures as const ata: Add driver for Faraday Technology FTIDE010 ata: Add DT bindings for the Gemini SATA bridge ata: Add DT bindings for Faraday Technology FTIDE010 libata: implement SECURITY PROTOCOL IN/OUT libata: factor out a ata_identify_page_supported helper ... |
||
Jerome Brunet
|
8517bb1f19 |
dt-bindings: pwm: meson: Add compatible for gxbb ao PWMs
Add compatible string to properly handle the PWMs found in the AO domain of the gxbb (and gxl) family. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |