Most of the helpers to retrieve vc4 structures from the DRM base structures
rely on the fact that the first member of the vc4 structure is the DRM one
and just cast the pointers between them.
However, this is pretty fragile especially since there's no check to make
sure that the DRM structure is indeed at the offset 0 in the structure, so
let's use container_of to make it more robust.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
Since the components for a given device in ASoC are identified by their
name, it makes sense to add one even though it's not strictly necessary.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
When built as a loadable module, coresight now causes a warning about
missing license information.
WARNING: modpost: missing MODULE_LICENSE() in drivers/hwtracing/coresight/coresight.o
Fixes: 8e264c52e1 ("coresight: core: Allow the coresight core driver to be built as a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20201026160205.3704789-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Creating debugfs files while loding the spin_lock_irqsave(xhci->lock)
creates a lock dependecy that could possibly deadlock.
Lockdep warns:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.10.0-rc1pdx86+ #8 Not tainted
-----------------------------------------------------
systemd-udevd/386 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb1a94038 (pin_fs_lock){+.+.}-{2:2}, at: simple_pin_fs+0x22/0xa0
and this task is already holding:
ffff9e7b87fbc430 (&xhci->lock){-.-.}-{2:2}, at: xhci_alloc_streams+0x5f9/0x810
which would create a new lock dependency:
(&xhci->lock){-.-.}-{2:2} -> (pin_fs_lock){+.+.}-{2:2}
Create the files a bit later after lock is released.
Fixes: 673d746836 ("usb: xhci: add debugfs support for ep with stream")
CC: Li Jun <jun.li@nxp.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this,
need to disable a bit which is enable in sparse controller.
Cc: stable@vger.kernel.org #v4.19+
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sandeep Singh <sandeep.singh@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An incorrect sizeof() is being used, sizeof(rhub->ports) is not
correct, it should be sizeof(*rhub->ports). This bug did not
cause any issues because it just so happens the sizes are the same.
Fixes: bcaa9d5c59 ("xhci: Create new structures to store xhci port information")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chip->port_type and chip->pwr_opmode are enums and when GCC considers them
as unsigned, the conditions are never met.
This patch takes advantage of the ret variable and fixes the following
warnings:
drivers/usb/typec/stusb160x.c:548 stusb160x_get_fw_caps() warn: unsigned 'chip->port_type' is never less than zero.
drivers/usb/typec/stusb160x.c:570 stusb160x_get_fw_caps() warn: unsigned 'chip->pwr_opmode' is never less than zero.
Fixes: da0cb63100 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201028163309.12878-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When stusb160x driver is built as a module, no modalias information is
available, and it prevents the module to be loaded by udev.
Add MODULE_DEVICE_TABLE() to fix this issue.
Fixes: da0cb63100 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20201028151703.31195-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New synthetic event code used strcat() and miscalculated the ending, causing
the concatenation to write beyond the allocated memory.
Instead of using strncat(), the code is switched over to seq_buf which has
all the mechanisms in place to protect against writing more than what is
allocated, and cleans up the code a bit.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX5lZkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qu8+AQDfg1UM12HUIs1XRhbXBxf9g3kjwrJh
nuoMilEZZstSCgD8DDQiPckOS9NfrdkyCPQ86tIKoOsGPowoA21sNOHPvQQ=
=+V+S
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix synthetic event "strcat" overrun
New synthetic event code used strcat() and miscalculated the ending,
causing the concatenation to write beyond the allocated memory.
Instead of using strncat(), the code is switched over to seq_buf which
has all the mechanisms in place to protect against writing more than
what is allocated, and cleans up the code a bit"
* tag 'trace-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, synthetic events: Replace buggy strcat() with seq_buf operations
`width` and `height` are defined as unsigned in our UAPI font descriptor
`struct console_font`. Make them unsigned in our kernel font descriptor
`struct font_desc`, too.
Also, change the corresponding printk() format identifiers from `%d` to
`%u`, in sti_select_fbfont().
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028105647.1210161-1-yepeilin.cs@gmail.com
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No functional change; just reserve the feature bit for now so that VMMs
can start to implement it.
This will allow the host to indicate that MSI emulation supports 15-bit
destination IDs, allowing up to 32768 CPUs without interrupt remapping.
cf. https://patchwork.kernel.org/patch/11816693/ for qemu
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <4cd59bed05f4b7410d3d1ffd1e997ab53683874d.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On exception entry, the kernel explicitly resets the PSTATE.TCO (tag
check override) so that any kernel memory accesses will be checked (the
bit is restored on exception return). This has the side-effect that the
uaccess routines will not honour the PSTATE.TCO that may have been set
by the user prior to a syscall.
There is no issue in practice since PSTATE.TCO is expected to be used
only for brief periods in specific routines (e.g. garbage collection).
To control the tag checking mode of the uaccess routines, the user will
have to invoke a corresponding prctl() call.
Document the kernel behaviour w.r.t. PSTATE.TCO accordingly.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: df9d7a22dd ("arm64: mte: Add Memory Tagging Extension documentation")
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This switches ext4 over to the generic support provided in libfs.
Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_ext_search_right() will read more extent blocks and call put_bh
after we get the information we need. However, ret_ex will break this
and may cause use-after-free once pagecache has been freed. Fix it by
copying the extent structure if needed.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
With this fix, fast commit recovery code uses IS_ERR() for path
returned by ext4_find_extent.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027204342.2794949-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit afb585a97f "ext4: data=journal: write-protect pages on
j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write()
to track inode ranges whose mappings need to get write-protected during
transaction commits. However the added calls use wrong start of a range
(0 instead of page offset) and so write protection is not necessarily
effective. Use correct range start to fix the problem.
Fixes: afb585a97f ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The kernel-doc markup that documents _fc_replay_callback is
missing an asterisk, causing this warning:
../include/linux/jbd2.h:1271: warning: Function parameter or member 'j_fc_replay_callback' not described in 'journal_s'
When building the docs.
Fixes: 609f928af48f ("jbd2: fast commit recovery path")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6055927ada2015b55b413cdd2670533bdc9a8da2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4's fast commit related transient states should use
sb->s_mount_flags instead of persistent sb->s_mount_state.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.
Fixes: 6866d7b3f2 ("ext4/jbd2: add fast commit initialization")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_inode_datasync_dirty() needs to return 'true' if the inode is
dirty, 'false' otherwise, but the logic seems to be incorrectly changed
by commit aa75f4d3da ("ext4: main fast-commit commit path").
This introduces a problem with swap files that are always failing to be
activated, showing this error in dmesg:
[ 34.406479] swapon: file is not committed
Simple test case to reproduce the problem:
# fallocate -l 8G swapfile
# chmod 0600 swapfile
# mkswap swapfile
# swapon swapfile
Fix the logic to return the proper state of the inode.
Link: https://lore.kernel.org/lkml/20201024131333.GA32124@xps-13-7390
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If should_futex_fail() returns true in futex_wake_pi(), then the 'ret'
variable is set to -EFAULT and then immediately overwritten. So the failure
injection is non-functional.
Fix it by actually leaving the function and returning -EFAULT.
The Fixes tag is kinda blury because the initial commit which introduced
failure injection was already sloppy, but the below mentioned commit broke
it completely.
[ tglx: Massaged changelog ]
Fixes: 6b4f4bc9cb ("locking/futex: Allow low-level atomic operations to return -EAGAIN")
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200927000858.24219-1-mateusznosek0@gmail.com
Geert reports that commit be2881824a ("arm64/build: Assert for
unwanted sections") results in build errors on arm64 for configurations
that have CONFIG_MODULES disabled.
The commit in question added ASSERT()s to the arm64 linker script to
ensure that linker generated sections such as .got.plt etc are empty,
but as it turns out, there are corner cases where the linker does emit
content into those sections. More specifically, weak references to
function symbols (which can remain unsatisfied, and can therefore not
be emitted as relative references) will be emitted as GOT and PLT
entries when linking the kernel in PIE mode (which is the case when
CONFIG_RELOCATABLE is enabled, which is on by default).
What happens is that code such as
struct device *(*fn)(struct device *dev);
struct device *iommu_device;
fn = symbol_get(mdev_get_iommu_device);
if (fn) {
iommu_device = fn(dev);
essentially gets converted into the following when CONFIG_MODULES is off:
struct device *iommu_device;
if (&mdev_get_iommu_device) {
iommu_device = mdev_get_iommu_device(dev);
where mdev_get_iommu_device is emitted as a weak symbol reference into
the object file. The first reference is decorated with an ordinary
ABS64 data relocation (which yields 0x0 if the reference remains
unsatisfied). However, the indirect call is turned into a direct call
covered by a R_AARCH64_CALL26 relocation, which is converted into a
call via a PLT entry taking the target address from the associated
GOT entry.
Given that such GOT and PLT entries are unnecessary for fully linked
binaries such as the kernel, let's give these weak symbol references
hidden visibility, so that the linker knows that the weak reference
via R_AARCH64_CALL26 can simply remain unsatisfied.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20201027151132.14066-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add description for Vin power supply and for peripherals that
are supplied by Vin.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Commit 76085aff29 ("efi/libstub/arm64: align PE/COFF sections to segment
alignment") increased the PE/COFF section alignment to match the minimum
segment alignment of the kernel image, which ensures that the kernel does
not need to be moved around in memory by the EFI stub if it was built as
relocatable.
However, the first PE/COFF section starts at _stext, which is only 4 KB
aligned, and so the section layout is inconsistent. Existing EFI loaders
seem to care little about this, but it is better to clean this up.
So let's pad the header to 64 KB to match the PE/COFF section alignment.
Fixes: 76085aff29 ("efi/libstub/arm64: align PE/COFF sections to segment alignment")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20201027073209.2897-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
ata_qc_complete_multiple() has to be called with the tags physically
active, that is the hw tag is at bit 0. ap->qc_active has the same tag
at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that
up. This is done in the vein of 8385d756e1 ("libata: Fix retrieving of
active qcs").
Fixes: 28361c4036 ("libata: add extra internal command")
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the bio's size reaches max_append_sectors, bio_add_hw_page returns
0 then __bio_iov_append_get_pages returns -EINVAL. This is an expected
result of building a small enough bio not to be split in the IO path.
However, iov_iter is not advanced in this case, causing the same pages
are filled for the bio again and again.
Fix the case by properly advancing the iov_iter for already processed
pages.
Fixes: 0512a75b98 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org # 5.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we started making the linker warn about orphan sections
(input sections that are not explicitly consumed by an output section),
some configurations produce the following warning:
aarch64-linux-gnu-ld: warning: orphan section `.igot.plt' from
`arch/arm64/kernel/head.o' being placed in section `.igot.plt'
It could be any file that triggers this - head.o is simply the first
input file in the link - and the resulting .igot.plt section never
actually appears in vmlinux as it turns out to be empty.
So let's add .igot.plt to our collection of input sections to disregard
unless they are empty.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20201028133332.5571-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The check_user_mem test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 4)
Fix the test adding the correct test plan declaration.
Fixes: 4dafc08d0b ("kselftest/arm64: Check mte tagged user address in kernel")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-7-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The check_ksm_options test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 4)
Fix the test adding the correct test plan declaration.
Fixes: f981d8fa26 ("kselftest/arm64: Verify KSM page merge for MTE pages")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-6-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The check_mmap_options test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 22)
Fix the test adding the correct test plan declaration.
Fixes: 53ec81d232 ("kselftest/arm64: Verify all different mmap MTE options")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-5-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The check_child_memory test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 12)
Fix the test adding the correct test plan declaration.
Fixes: dfe537cf47 ("kselftest/arm64: Check forked child mte memory accessibility")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-4-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The check_tags_inclusion test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 4)
Fix the test adding the correct test plan declaration.
Fixes: f3b2a26ca7 ("kselftest/arm64: Verify mte tag inclusion via prctl")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-3-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The check_buffer_fill test reports the error below because the test
plan is not declared correctly:
# Planned tests != run tests (0 != 20)
Fix the test adding the correct test plan declaration.
Fixes: e9b60476be ("kselftest/arm64: Add utilities and a test to validate mte memory")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Gabor Kertesz <gabor.kertesz@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20201026121248.2340-2-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The icache_policy_str[] definition causes a warning when extra
warning flags are enabled:
arch/arm64/kernel/cpuinfo.c:38:26: warning: initialized field overwritten [-Woverride-init]
38 | [ICACHE_POLICY_VIPT] = "VIPT",
| ^~~~~~
arch/arm64/kernel/cpuinfo.c:38:26: note: (near initialization for 'icache_policy_str[2]')
arch/arm64/kernel/cpuinfo.c:39:26: warning: initialized field overwritten [-Woverride-init]
39 | [ICACHE_POLICY_PIPT] = "PIPT",
| ^~~~~~
arch/arm64/kernel/cpuinfo.c:39:26: note: (near initialization for 'icache_policy_str[3]')
arch/arm64/kernel/cpuinfo.c:40:27: warning: initialized field overwritten [-Woverride-init]
40 | [ICACHE_POLICY_VPIPT] = "VPIPT",
| ^~~~~~~
arch/arm64/kernel/cpuinfo.c:40:27: note: (near initialization for 'icache_policy_str[0]')
There is no real need for the default initializer here, as printing a
NULL string is harmless. Rewrite the logic to have an explicit
reserved value for the only one that uses the default value.
This partially reverts the commit that removed ICACHE_POLICY_AIVIVT.
Fixes: 155433cb36 ("arm64: cache: Remove support for ASID-tagged VIVT I-caches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201026193807.3816388-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit 78a5b53e9f ("Input: soc_button_array - work around DSDTs which
modify the irqflags") adds a workaround for DSDTs with a _LID method
which play tricks with the irqflags, assuming that the OS is using
an irq-type of IRQ_TYPE_LEVEL_LOW.
Now that this workaround is in place, we no longer need to disable the
lid functionality on the Acer SW5-012.
Fixes: 78a5b53e9f ("Input: soc_button_array - work around DSDTs which modify the irqflags")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In commit 5ba1278787, we shuffled with the check of 'perm'. But my
brain somehow inverted the condition in 'do_unimap_ioctl' (I thought
it is ||, not &&), so GIO_UNIMAP stopped working completely.
Move the 'perm' checks back to do_unimap_ioctl and do them right again.
In fact, this reverts this part of code to the pre-5ba127878722 state.
Except 'perm' is now a bool.
Fixes: 5ba1278787 ("vt_ioctl: move perm checks level up")
Cc: stable@vger.kernel.org
Reported-by: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201026055419.30518-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both read-side users of func_table/func_buf need locking. Without that,
one can easily confuse the code by repeatedly setting altering strings
like:
while (1)
for (a = 0; a < 2; a++) {
struct kbsentry kbs = {};
strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n");
ioctl(fd, KDSKBSENT, &kbs);
}
When that program runs, one can get unexpected output by holding F1
(note the unxpected period on the last line):
.
88888
.8888
So protect all accesses to 'func_table' (and func_buf) by preexisting
'func_buf_lock'.
It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep.
On the other hand, KDGKBSENT needs a local (atomic) copy of the string
because copy_to_user can sleep. Use already allocated, but unused
'kbs->kb_string' for that purpose.
Note that the program above needs at least CAP_SYS_TTY_CONFIG.
This depends on the previous patch and on the func_buf_lock lock added
in commit 46ca3f735f (tty/vt: fix write/write race in ioctl(KDSKBSENT)
handler) in 5.2.
Likely fixes CVE-2020-25656.
Cc: <stable@vger.kernel.org>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201019085517.10176-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use 'strlen' of the string, add one for NUL terminator and simply do
'copy_to_user' instead of the explicit 'for' loop. This makes the
KDGKBSENT case more compact.
The only thing we need to take care about is NULL 'func_table[i]'. Use
an empty string in that case.
The original check for overflow could never trigger as the func_buf
strings are always shorter or equal to 'struct kbsentry's.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201019085517.10176-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to the commit that this one fixes, the FIFO size was derived from
the read-only register LPUARTx_FIFO[TXFIFOSIZE] using the following
formula:
TX FIFO size = 2 ^ (LPUARTx_FIFO[TXFIFOSIZE] - 1)
The documentation for LS1021A is a mess. Under chapter 26.1.3 LS1021A
LPUART module special consideration, it mentions TXFIFO_SZ and RXFIFO_SZ
being equal to 4, and in the register description for LPUARTx_FIFO, it
shows the out-of-reset value of TXFIFOSIZE and RXFIFOSIZE fields as "011",
even though these registers read as "101" in reality.
And when LPUART on LS1021A was working, the "101" value did correspond
to "16 datawords", by applying the formula above, even though the
documentation is wrong again (!!!!) and says that "101" means 64 datawords
(hint: it doesn't).
So the "new" formula created by commit f77ebb241c has all the premises
of being wrong for LS1021A, because it relied only on false data and no
actual experimentation.
Interestingly, in commit c2f448cff2 ("tty: serial: fsl_lpuart: add
LS1028A support"), Michael Walle applied a workaround to this by manually
setting the FIFO widths for LS1028A. It looks like the same values are
used by LS1021A as well, in fact.
When the driver thinks that it has a deeper FIFO than it really has,
getty (user space) output gets truncated.
Many thanks to Michael for pointing out where to look.
Fixes: f77ebb241c ("tty: serial: fsl_lpuart: correct the FIFO depth size")
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201023013429.3551026-1-vladimir.oltean@nxp.com
Reviewed-by:Fugang Duan <fugang.duan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 293f899594 ("tty: serial: 21285: stop using the unused[]
variable from struct uart_port") introduced a bug which stops the
transmit interrupt being disabled when there are no characters to
transmit - disabling the transmit interrupt at the interrupt controller
is the only way to stop an interrupt storm. If this interrupt is not
disabled when there are no transmit characters, we end up with an
interrupt storm which prevents the machine making forward progress.
Fixes: 293f899594 ("tty: serial: 21285: stop using the unused[] variable from struct uart_port")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/E1kU4GS-0006lE-OO@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Bastien Nocera <hadess@hadess.net>
Contrary to the comment above the id table, we didn't implement a match
function. This meant that every single Apple device that was already
plugged in to the computer would have its device driver reprobed
when the apple-mfi-fastcharge driver was loaded, eg. the SD card reader
could be reprobed when the apple-mfi-fastcharge after pivoting root
during boot up and the module became available.
Make sure that the driver probe isn't being run for unsupported
devices by adding a match function that checks the product ID, in
addition to the id_table checking the vendor ID.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878347
Link: https://lore.kernel.org/linux-usb/CAE3RAxt0WhBEz8zkHrVO5RiyEOasayy1QUAjsv-pB0fAbY1GSw@mail.gmail.com/
Fixes: 249fa8217b ("USB: Add driver to control USB fast charge for iOS devices")
Cc: <stable@vger.kernel.org> # 5.8
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
[m.v.b: Add Link and Reported-by tags to the commit message]
Reported-by: Pany <pany@fedoraproject.org>
Tested-by: Pan (Pany) YUAN <pany@fedoraproject.org>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Link: https://lore.kernel.org/r/20201022135521.375211-3-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>