forked from Minki/linux
0ba9e6edd4
1736 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
cf0240a755 |
This is the bulk of pin control changes for the v5.1 kernel cycle.
No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJchil8AAoJEEEQszewGV1zTCcP/AurT3InBO4nVdN9UMuoDL7P gx3SALULapc4+M1NUoRw+w+z5fvjd0gGdPXZeyhX1E9kXxLmWBmBf6tl0MO2YYPC UWbSnBaWIOOli0f4k+GKVF8LKqD0z0e/YqX4mG7UI3OLJzcJgm7OL9uXN3Gh7tIP Pa6CGbv0aRDkZpWUD2ZTpSPCRYGT57roVq//d7V7s+0lveS97pQuMv43YlS5L2my JOOhHNG33bgi4lS/ZOP81G16oOrVaoupXuX7E+AvgG6vxr5965Fi+qoGLkxIuYOm jtrzuNY98eL2m9b505VYdNmD7ouBhG6CKFb4njpOvjkkqNUXOaGV53wlEuEYRUNz bsp0596+dlOcW7wl11r6YI4Kyn2wQJFql1AwS8A4dEtbuboGrDy16N3adr1SkIGZ 4ESN8xydcC7CAgUGXks+AgDj9vYwOs4apylJDW5tMk4K0LIsEYsDkbNeS9hwDYIH ZlbQe9N2loB6qQbX3c3D3/sIhKj2VB4elONSwOW10M8OJdJwp8h44UyMZ3TIEHIT 7Gu9pw5vobXbccKCSjqkYYflaHMmjwZUtLqDZws818sbe/xgDxONbRqloZCLV39Y kmwRGbbE5WtNAM0X+ABwMG3Lm77wxCFKCjJwLHH79qqt4kSBynEKXQ4D/coG/Hln 6idanzKEPiIBJ+6QLdbQ =EfXK -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ... |
||
|
Linus Torvalds
|
3601fe43e8 |
This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
|
||
|
Linus Torvalds
|
cf2e8c544c |
- New Drivers
- Add STMPE ADC Input driver
- Add STMicroelectronics STPMIC1 Parent driver
- Add STMicroelectronics STPMIC1 OnKey Misc driver
- Add STMicroelectronics STPMIC1 Watchdog driver
- Add Cirrus Logic Lochnagar Parent driver
- Add TQ-Systems TQMX86 Parent driver
- New Device Support
- Add support for ADC to STMPE
- New (or moved) Functionality
- Move Lightbar functionality to its own driver; cros_ec_lightbar
- Move VBC functionality to its own driver; cros_ec_vbc
- Move VBC functionality to its own driver; cros_ec_vbc
- Move DebugFS functionality to its own driver; cros_ec_debugfs
- Move SYSFS functionality to its own driver; cros_ec_sysfs
- Add support for input voltage options; tps65218
- Fix-ups
- Use devm_* managed resources; cros_ec
- Device Tree documentation; stmpe, aspeed-lpc, lochnagar
- Trivial Clean-ups; stmpe
- Rip out broken modular code; aat2870-core, adp5520, as3711,
db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
- Kconfig fixups; INTEL_SOC_PMIC
- Improve error path; sm501, sec-core
- Use struct_size() helper; sm501
- Constify; at91-usart
- Use pointers instead of copying data; at91-usart
- Deliver proper return value; cros_ec_dev
- Trivial formatting/whitespace; sec-core
-----BEGIN PGP SIGNATURE-----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=tUge
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add STMPE ADC Input driver
- Add STMicroelectronics STPMIC1 Parent driver
- Add STMicroelectronics STPMIC1 OnKey Misc driver
- Add STMicroelectronics STPMIC1 Watchdog driver
- Add Cirrus Logic Lochnagar Parent driver
- Add TQ-Systems TQMX86 Parent driver
New Device Support:
- Add support for ADC to STMPE
New (or moved) Functionality:
- Move Lightbar functionality to its own driver; cros_ec_lightbar
- Move VBC functionality to its own driver; cros_ec_vbc
- Move VBC functionality to its own driver; cros_ec_vbc
- Move DebugFS functionality to its own driver; cros_ec_debugfs
- Move SYSFS functionality to its own driver; cros_ec_sysfs
- Add support for input voltage options; tps65218
Fixes:
- Use devm_* managed resources; cros_ec
- Device Tree documentation; stmpe, aspeed-lpc, lochnagar
- Trivial Clean-ups; stmpe
- Rip out broken modular code; aat2870-core, adp5520, as3711,
db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
- Kconfig fixups; INTEL_SOC_PMIC
- Improve error path; sm501, sec-core
- Use struct_size() helper; sm501
- Constify; at91-usart
- Use pointers instead of copying data; at91-usart
- Deliver proper return value; cros_ec_dev
- Trivial formatting/whitespace; sec-core"
* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
mfd: mxs-lradc: Mark expected switch fall-through
mfd: sec-core: Cleanup formatting to a consistent style
mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
mfd: intel-lpss: Move linux/pm.h to the local header
mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
mfd: at91-usart: No need to copy mfd_cell in probe
mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
mfd: lochnagar: Add initial binding documentation
dt-bindings: mfd: aspeed-lpc: Make parameter optional
mfd: sec-core: Return gracefully instead of BUG() if device cannot match
mfd: sm501: Use struct_size() in devm_kzalloc()
mfd: sm501: Fix potential NULL pointer dereference
mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
mfd: tps65218.c: Add input voltage options
mfd: wm8400-core: Make it explicitly non-modular
mfd: wm8350-core: Drop unused module infrastructure from non-modular code
mfd: wm8350-i2c: Make it explicitly non-modular
mfd: wm831x-core: Drop unused module infrastructure from non-modular code
...
|
||
|
Linus Torvalds
|
e266ca36da |
Staging/IIO patches for 5.1-rc1
Here is the big staging/iio driver pull request for 5.1-rc1. Lots of good IIO driver updates and cleanups in here as always. Combined with the removal of the xgifb driver, we have a net "loss" of over 9000 lines in the pull request, always a nice thing. As the outreachy application process is currently happening, there are loads of tiny checkpatch cleanup fixes all over the staging tree, which accounts for the majority of the fixups. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+gLQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymBiQCeJpoBhG+W3r+kP8w65ZY8qU+/liIAn0Tkl4/k IX1dQzCsEpO1jA8AHj6n =7wCH -----END PGP SIGNATURE----- Merge tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big staging/iio driver pull request for 5.1-rc1. Lots of good IIO driver updates and cleanups in here as always. Combined with the removal of the xgifb driver, we have a net "loss" of over 9000 lines in the pull request, always a nice thing. As the outreachy application process is currently happening, there are loads of tiny checkpatch cleanup fixes all over the staging tree, which accounts for the majority of the fixups" * tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: mt7621-dma: remove license boilerplate text staging: mt7621-dma: add SPDX GPL-2.0+ license identifier Staging: ks7010: Replace typecast to int Staging: vt6655: Align a static function declaration staging: speakup: fix line over 80 characters. staging: mt7621-eth: Remove license boilerplate text staging: mt7621-eth: Add SPDX license identifier staging: ks7010: removed custom Michael MIC implementation. staging: rtl8192e: Fix space and suspect issue Staging: vt6655: Modify comment style of SPDX License Identifier Staging: vt6655: Modify comment style for SPDX-License-Identifier Staging: vt6655: Align a function declaration Staging: vt6655: Alignment of function declaration staging: rtl8712: Fix indentation issue staging: wilc1000: fix incorrent type in initializer staging: rtl8188eu: remove unused P2P_PRIVATE_IOCTL_SET_LEN staging: rtl8188eu: remove unused enum P2P_PROTO_WK_ID staging: rtl8723bs: Remove duplicated include from drv_types.h Staging: vt6655: Alignment should match open parenthesis staging: erofs: fix mis-acted TAIL merging behavior ... |
||
|
Linus Torvalds
|
45763bf4bc |
Char/Misc driver patches for 5.1-rc1
Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ 9e3l7H76oe33o96Qjhor =8A2k -----END PGP SIGNATURE----- Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ... |
||
|
Linus Torvalds
|
384d11fa0e |
ARM: SoC driver updates for 5.1
As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJcfpKpAAoJEGCrR//JCVInMpYQANwKKWOTm5NHqtf7/ZKBzx6/ Yk7Jj8QLGKrHScnuBZSBvTwv5Cc5O5Ye+tAuGVArOoD2ktXlLZmHZ/ZPFAudT3di aFYbA44RNhv+O/xOmToDCCjSHm176hwUY0Cs5bFnfx6TcMsdOYIQIG+XQKx/a9zg 3ZBEv7wZqcBArLc0X2Z2/uiVrEIh3wWwXytvw+8TG8ifUfpbDxRUxDlj1JRDpjMu yX4q8JDhdQvi2FTXbXcEHTdQ6RT11svPM/YxQDxfULRK9aNKf4GZJ4QlwZy+SO7N cEFxDd4ML/iJ1LjalvtXGkR0xrw9/gOlO3vbB9Uw3EngBDUSQfHmqJet10a14l8q KcToe3teIB+Z1R+plrt+h5UDJTbVibgZXhU6wIdkDgtF6oTyg1moIbTqNKHgcA3b HLJv4gFejeluQzJ/3dZHBnkvJo1XFAvGFmFXle0bmJRFtDx73CKnf6MA9N82l2/x nTn4LTxXIJVKWTWAs1qkrFyIx1gOrpGhiHPQ2JiOPMZLstz3Sr6tiJuWOr+1Ex4/ UlZsD/CrRb+SbPBonpkD+bvzSR+j0M72A7hGmfZcDzainciWgunyXglUlzO/MT24 C6p4R9MZ2Fffoe8pESppabRNUItp8gNsNGI7CY1IK8pgpxLrujw8OnqykpV0VETo As+6dZrHfPNSuI7udJi5 =+DOl -----END PGP SIGNATURE----- Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ... |
||
|
Linus Torvalds
|
6ad63dec9c |
ARM: SoC device tree updates for 5.1
This is a smaller update than the past few times, but with just over
500 non-merge changesets still dwarfes the rest of the SoC tree.
Three new SoC platforms get added, each one a follow-up to an existing
product, and added here in combination with a reference platform:
- Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html
- Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for
Rich Graphics Applications".
https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html
- NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X
These are actual commercial products we now support with an in-kernel
device tree source file:
- Bosch Guardian is a product made by Bosch Power
Tools GmbH, based on the Texas Instruments AM335x chip
- Winterland IceBoard is a Texas Instruments AM3874 based
machine used in telescopes at the south pole and elsewhere, see commit
|
||
|
Linus Torvalds
|
aebbfafc74 |
ARM: SoC platform updates for 5.1
The APM X-Gene platform is now maintained by folks from Ampere computing that took over the product line a while ago, this gets reflected in the MAINTAINERS file. Cleanups continue on the older mach-davinci and mach-pxa platform, to get them to be more like the modern ones. For pxa, we now remove the Raumfeld platform code as it now works with device tree based booting. i.MX adds a couple new features for the i.MX7ULP SoC Mediatek gains support for a new SoC: MT7629 is a new wireless router platform, following MT7623. Aside from those, there are the usual minor cleanups and bugfixes across several platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJcf+c8AAoJEGCrR//JCVInuUsQAK+F+7hrfkwCSLXzqVIPMYC1 hFV11s7bgbHfzkSa6ZyFC0uuT737dZjJrOdvZOXFJ2VxDscxI62mj56jCrF8tr1x BQqIiDLGU55mLTkPiVtmVi8p79IXz2G/1dBeYrfyj/xec6DsjVkO1Cm2itQ3vg5Q ZM8DRmIxsKsUv6YSGRfwVNXso9jOh+LPxlfrGL5ijdHgzDxRr7gO+B+jxgx9Sf6s DNLj6M8L8DFo528eHp2pJNBL21pMywAaIrDELUJyg5P3XnDX18F8CjbSRgm7OG1+ hkdmML9qQlpOjokPJ9eeitX2e+tvKoXLn+N9kq12Pn4fkvJpKlOVnZmU+Le/3By+ agX7hE2A21nsZuoHQjq16QoO4X9mDee7tcDMzGwTrSq1M18m2dEJW57vivda0qKN wNJC3qwLmh2/wfxNpO2wS29hQni7cIrFgRvUPsB/u8KvzITbQ/PMGApNV+Kf7BiO mZjH8X+0IkX0veS11KLsFUCbq4ezpPCNxbul2mMIVcTIV0Oz6mQXNHAecNxCCqMk GAgi48+9KYNszG01Xqx++x79BFnIoUJp3+gIGIa8rTvdSSsF8DlQlSzXufD9Sb2h CS+M8kvgfymUrjaKZNyR5ouI1ae1Q16pbapkpS4B6ucoc4Qbqz2POiSVhex+eU/N IrEAFEhRg7iQ9NHUaWlx =vxwd -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform updates from Arnd Bergmann: "The APM X-Gene platform is now maintained by folks from Ampere computing that took over the product line a while ago, this gets reflected in the MAINTAINERS file. Cleanups continue on the older mach-davinci and mach-pxa platform, to get them to be more like the modern ones. For pxa, we now remove the Raumfeld platform code as it now works with device tree based booting. i.MX adds a couple new features for the i.MX7ULP SoC Mediatek gains support for a new SoC: MT7629 is a new wireless router platform, following MT7623. Aside from those, there are the usual minor cleanups and bugfixes across several platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) MAINTAINERS: Update Ampere email address usb: ohci-da8xx: remove unused callbacks from platform data ARM: davinci: da830-evm: remove legacy usb helpers ARM: davinci: omapl138-hawk: remove legacy usb helpers usb: ohci-da8xx: add vbus and overcurrent gpios ARM: davinci: da830-evm: use gpio lookup entries for usb gpios ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios usb: ohci-da8xx: add a helper pointer to &pdev->dev usb: ohci-da8xx: add a new line after local variables arm64: meson: enable g12a clock controller MAINTAINERS: Add entry for uDPU board ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API arm: mediatek: add MT7629 smp bring up code Revert "ARM: mediatek: add MT7623a smp bringup code" dt-bindings: soc: fix typo of MT8173 power dt-bindings ARM: meson: remove COMMON_CLK_AMLOGIC selection arm64: meson: remove COMMON_CLK_AMLOGIC selection ARM: lpc32xx: remove platform data of ARM PL111 LCD controller ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller ARM: lpc32xx: Use kmemdup to replace duplicating its implementation ... |
||
|
Linus Torvalds
|
d9862cfbe2 |
Here's the main MIPS pull request for v5.1:
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXH3BQxUccGF1bC5idXJ0 b25AbWlwcy5jb20ACgkQPqefrLV1AN1+4wD+Oh4JTfZN/NEOQMlrSkXxjEHqjX3u 1Y6CiiPCs+q2UnYBANb+ic+ZH5MnvJxxmcvlYI2q3rIh4b8TDriip4KMUTUP =Sw9X -----END PGP SIGNATURE----- Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ... |
||
Linus Walleij
|
8fab3d713c |
gpio updates for v5.1
- support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAlxleLcACgkQEacuoBRx 13I45Q//YMGUYzkMjOL+lp2DYnnVhVNqrF4hoLjinWVrnhZ6gqu88RgV2Cea4Pta oxVxnSsE8LK7kY8VZ8tcBmIqLLkQAJdSVtqkeSoZF2vhWBAbE9ZaSOYb17SIkSXK Ok16lZgZ+ZWOM5EjEvuRpB/qYGjX2glD5/Y2Kl7+wsX1W6U2pXasP0IjhcvDU8mJ NXNgfkr6kluMUqHJyqKo8eT/P3Hdv0CK9GsN2vGyfJenCdTSd7EC6KuhWAivi+fG /lf1bVuc2cCiXjxdSOXx+Yz7SjNe56viTaqnn/K6OlfLgErjKnRW+AxPkTZXNtDi pfMMpPXiwPcbQR2wrXG/7OMmJ1kUsfWoIUCx5RDwhF1KbEQVqgaSITLylk+4Yp/3 eM0fYsQ+KvOdAnWKSgfxBhaaiO7z5XDdrnkSHBDoiBrm07BqBgK/v3Rivzf2GMEv QvM4OBfThS9I8skV5BaOBRDfHZs4N0EU/vhsW9gt50urtlSM0vSYx6kdMq/8R0k4 NkJT43u+1vi5koMljBAsZYZiyXOQ2B+PlfpTMfMu+93QH8wlu9mOt1r3YTQyA1Xf jiOK8M2yQKP5g7RuPM6MtMsqlZKDM5nAlSf7S280Z3+vBd+LaELbXvT2/JL5ViGU hfH/gaNwUGUYd8EsWvfhHVdPAAecDCwxfKyKEnFGhMrtunTgwfI= =nV64 -----END PGP SIGNATURE----- Merge tag 'gpio-v5.1-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr |
||
Arnd Bergmann
|
d0e1f79ad3 |
Merge tag 'v5.0-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes
mt8173: minor typo in scpsys header file mt7629: add smp bringup code mt7623a: delete unused smp bringup code * tag 'v5.0-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: mediatek: add MT7629 smp bring up code Revert "ARM: mediatek: add MT7623a smp bringup code" dt-bindings: soc: fix typo of MT8173 power dt-bindings Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
187b4ac7df |
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following: - Stefan updates the BCM2835 SoC driver with downstream properties and uses that to implement a reboot notifier to tell the VC4 firmware when Linux on the ARM CPU is rebooting - Eric adds a proper power domain driver for the BCM283x SoCs and updates a bunch of drivers to have a better and clearer Device Tree definition to support power domains/breaking up of functionality. This requires converting the existing watchdog driver into a MFD and then breaking up the functionality into separate drivers and finally updating the DTS files to leverage the power domains information. - Wei provides a fix for making a symbol static -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAlxV0IYACgkQh9CWnEQH BwQIHA//TL12EfHws6C64EKspqsg9NE5/+K3HRRJbgwtuBQ/n6oYBMyJx+6x6Nwc 7QjuCkZ/VWKxy0Fn+ToGnX0JgrQL5kND3Cm0d8cyZ0VJ6juppizyAa1YkFplShSr l0XlYaJo1HrB3hBd/+YbGZnLp9flbii5d3MIcy8ZoWmN7zLeHnQbHaf8jcbJC+Iw Mal8ojk2ru0rMimMQieTiPzWwiec08wtSIYs2590rOVWFyhGIn/KmHqpG6iYjdwj oQbr86R0jMPCb/g3SXRttxW8wFbtYdmILdkzhOaEd4JyJEwUCNDciM3E04OyE9VN fNMc1l0zh7dfyo9bFRpgS6AAxYQVj3led+B1NGtpnjDPybVWU10gipGdgFt9UPRE pJnS1LcPbAJ1FdbcYFU0TsiViWLZehm2cbc4rPYvqKp1Y+82FJZTYyu0GmBOUwB6 jpM5ZVvET8k3nw6ImeE3jjT3kBfF31u552+iO4RQvKHRm/GBMtyTDrFZVUwgqMFE NEKnj3/VLSCxP3dnQImw1ro2493piZNdlBEs6mAugFUGqcb+40KOtOOpWiGMFH7h BZN0kj128ryG/YCVKDOnZSbYRLhpxc1VcVYJ3rYJgn8mrFFmNo/fjDgaRogrJN/s LmCiSIqsmuy8f36/IWd+aHk6ex5yskJe7x5M/7tlmz03oXg1viQ= =t5+u -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes for 5.1, please pull the following: - Stefan updates the BCM2835 SoC driver with downstream properties and uses that to implement a reboot notifier to tell the VC4 firmware when Linux on the ARM CPU is rebooting - Eric adds a proper power domain driver for the BCM283x SoCs and updates a bunch of drivers to have a better and clearer Device Tree definition to support power domains/breaking up of functionality. This requires converting the existing watchdog driver into a MFD and then breaking up the functionality into separate drivers and finally updating the DTS files to leverage the power domains information. - Wei provides a fix for making a symbol static * tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux: ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware. ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4) soc: bcm: bcm2835-pm: Make local symbol static soc: bcm: Make PM driver default for BCM2835 soc: bcm: bcm2835-pm: Add support for power domains under a new binding. bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD. dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4) firmware: raspberrypi: notify VC4 firmware of a reboot soc: bcm2835: sync firmware properties with downstream Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
405bcfff17 |
Qualcomm ARM Based Driver Updates for v5.1
* Add Qualcomm RPMh power domain driver and related changes * Fix issues with sleep/wake sets and batch API in RPMh * Update MAINTAINERS Qualcomm entry * Fixup RMTFS-mem sysfs and uevents * Fix error handling in GSBI * Add SMD-RPM compatible entry for SDM660 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcV75tAAoJEFKiBbHx2RXV3ZcQAJ4xdmg0eVXrzu4ltl/ZbF7m walu7pGtLF7lIXJoJZWgpzS6SAmDQAMG++pp6zP6+3t6fB8heSNVBImgo2l6fHzr KEHoH1PFhrdZwyOhswE/5n5CZBOb4xrL+m94NufDh7Yv8h5ukC8DH3xE9PFsoh4A GnDc6qkHByNJKuNxlKKASq6VRMqzpnys2Ibzs6G5/6UDzvnEAYj5VoHLLCjsh6r+ +bKusJPUZKujyLU85rbtpEjO1HxHiOq7TJI5FZ8dta+iXSyIc/2nM9InTgr68ATq VN7mOtclMEiVN8uQaXN0D/FWK3JYBIY5Mvd8zYzzkE+NDj0tnZDZoLjK2VnTX9o+ nORX7vQc/JmBayLcMaBZ/ZB+i2lsg37ziFCZaZiP9GYR1DAvm3yLfaxbWmkVKbGq lhf/dR7qyXKjIP8rPO2qp4sCKww2RbkDa2p+xnQ2/psjvpgkmy4lcfIhw5HWonQR eJ1UgoLsdQf/Xi6cKKmuzbdQsmZGr95sTHh06Gw1yeMRGuoXTHSNYx5epLdwJmD5 OWcIwh+sfZdmKUhMB/895EFpRuK/+L07N+n48DYaaU4CHXcowp80Ng5V6FnEnEWm tI9oKt3N2kAYQAPlgpb3azTtAmB+yAcaYGrNQXzd7nYLnLma40qCR0Nx8bMXCjeq sgRdF06ATCQDbBruztw3 =CcrU -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/drivers Qualcomm ARM Based Driver Updates for v5.1 * Add Qualcomm RPMh power domain driver and related changes * Fix issues with sleep/wake sets and batch API in RPMh * Update MAINTAINERS Qualcomm entry * Fixup RMTFS-mem sysfs and uevents * Fix error handling in GSBI * Add SMD-RPM compatible entry for SDM660 * tag 'qcom-drivers-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: soc: qcom: smd-rpm: Add sdm660 compatible soc: qcom: gsbi: Fix error handling in gsbi_probe() soc: qcom: rpmh: Avoid accessing freed memory from batch API drivers: qcom: rpmh: avoid sending sleep/wake sets immediately soc: qcom: rmtfs-mem: Make sysfs attributes world-readable soc: qcom: rmtfs-mem: Add class to enable uevents soc: qcom: update config dependencies for QCOM_RPMPD soc: qcom: rpmpd: Drop family A RPM dependency MAINTAINERS: update list of qcom drivers soc: qcom: rpmhpd: Mark mx as a parent for cx soc: qcom: rpmhpd: Add RPMh power domain driver soc: qcom: rpmpd: Add support for get/set performance state soc: qcom: rpmpd: Add a Power domain driver to model corners dt-bindings: power: Add qcom rpm power domain driver bindings OPP: Add support for parsing the 'opp-level' property dt-bindings: opp: Introduce opp-level bindings Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
6f2185f8e3 |
Reset controller changes for v5.1
This adds the include/linux/reset directory to MAINTAINERS for reset specific headers and adds headers for sunxi and socfpga in there to get rid of a few extern function declarations. There is a new reset driver for the Broadcom STB reset controller and the i.MX7 system reset controller driver is extended to support i.MX8MQ as well. Finally, there is a new header with reset id constants for the Meson G12A SoC, which has a reset controller identical to Meson AXG and thus can reuse its driver and DT bindings. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXF2yeRcccC56YWJlbEBw ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwH8jAP9OQaMl5llVXuHSFOwiqkJ2I09p oROxu3dI/A4q7d5T8QD/Xuo4piSAdoT5YZyHp16NUafW3L1//wqTvxk0ubeTsgA= =EIyo -----END PGP SIGNATURE----- Merge tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux into arm/drivers Reset controller changes for v5.1 This adds the include/linux/reset directory to MAINTAINERS for reset specific headers and adds headers for sunxi and socfpga in there to get rid of a few extern function declarations. There is a new reset driver for the Broadcom STB reset controller and the i.MX7 system reset controller driver is extended to support i.MX8MQ as well. Finally, there is a new header with reset id constants for the Meson G12A SoC, which has a reset controller identical to Meson AXG and thus can reuse its driver and DT bindings. * tag 'reset-for-5.1' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: meson: add g12a bindings reset: imx7: Add support for i.MX8MQ IP block variant reset: imx7: Add plubming to support multiple IP variants reset: Add Broadcom STB SW_INIT reset controller driver dt-bindings: reset: Add document for Broadcom STB reset controller reset: socfpga: declare socfpga_reset_init in a header file reset: sunxi: declare sun6i_reset_init in a header file MAINTAINERS: use include/linux/reset for reset controller related headers dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
59f527dd7a |
arm64: zynqmp: SoC changes for v5.1
- Extend firmware interface with reset, nvmem, power management and power domain support - Add reset, nvmem driver, power management and power domain drivers - -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlxixLEACgkQykllyylKDCEduwCeLkIFr48uJ/5Fv1X16gitcrOk F38An2wbsk21xkWQpfzCFdUrpPbT0u4t =GOP8 -----END PGP SIGNATURE----- Merge tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx into arm/drivers arm64: zynqmp: SoC changes for v5.1 - Extend firmware interface with reset, nvmem, power management and power domain support - Add reset, nvmem driver, power management and power domain drivers - * tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx: drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings drivers: soc: xilinx: Add ZynqMP PM driver firmware: xilinx: Implement ZynqMP power management APIs dt-bindings: soc: Add ZynqMP PM bindings nvmem: zynqmp: Added zynqmp nvmem firmware driver dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver firmware: xilinx: Add zynqmp_pm_get_chipid() API reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller. dt-bindings: reset: Add bindings for ZynqMP reset driver firmware: xilinx: Add reset API's Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
550a43b310 |
Renesas ARM Based SoC DT Updates for v5.1
* R-Car H2 (r8a7790) based Stout board - Convert to new LVDS DT bindings * R-Car H1 (r8a7779) and M1A (r8a7778) SoCs - Describe HSCIF0/1 devices in DT * RZ/G1M (r8a7743) SoC - Correct sort order of the RWDT node - Remove aliases: should be defined in board rather than SoC DT if needed - Remove generic compatible string from iic3: it is not compatible * RZ/G1N (r8a7744) SoC - Describe LVDS and DU devices in DT - Correct sort order of VSP and MSIOF noces * RZ/G1C (r8a7747) based iWave SBC - Enable RTC * RZ/A2M (r7s9210) SoC and EVB - Initial support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlxdXz4ACgkQ189kaWo3 T75wbBAAqOyXvMCt7lGsov4i0e/lqSFl13uHv83Mk+PVvvT48H2g/ItitGDq4GYr ItAYBRF66XcAKJbA30e4OvAk+yB0Y3iMT8KIR4Nca5ls9rn6NwbyBugZ65mizKEk vIoA1sGpsWUrK0yxmGoIx9C6aX9qsh82ivdMpvwb1Kzy5oO59GCgJ9d/d+Q2KwvG rycEPQwHLFIIijoNr0IH3ZiXhyfeEabGHg/EK/FVxJJNgQLjFW0ZogsZ/a49ptoZ YZqEc2w13a+rWFTg7059UbzPNjJCq0/2lYRPthWTz9KzUyFgSZ+2GvawdoFSvBZ5 cf+6+qZkgkVvs00yajd6Q2t9IcyjeVmU+GBHFSO65wDRJknDN8sE1v/qHaAr0+Bm My8Th55Tzak/d+6Zb6xP95kTiaUDpWQrjntMvg3AewiAcjDJasBSsU9EDBlEDh3W VaQVkyyHtWwfiS0qFf4u0Rfgb2DIBYLvXzslipyZnsKih14+rC/S6N3j8rykrOoE DTjh7Hi4k4xYwqwNFrg9lvGCoAG4aZddyat9SYfgTs65OmG7huyTH5vqtsmB3kN0 0a33nQ8xt24TH6wSHGB17GXeR9JEluqHC0Do9bbis1B6QiSBvcY+Ne1LtFN8O5sH RNEcoqU1cCLVHvbRJL/3Y5bwYF22f0GvbMxO/vgdmcz2DSxbuL0= =q0l0 -----END PGP SIGNATURE----- Merge tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM Based SoC DT Updates for v5.1 * R-Car H2 (r8a7790) based Stout board - Convert to new LVDS DT bindings * R-Car H1 (r8a7779) and M1A (r8a7778) SoCs - Describe HSCIF0/1 devices in DT * RZ/G1M (r8a7743) SoC - Correct sort order of the RWDT node - Remove aliases: should be defined in board rather than SoC DT if needed - Remove generic compatible string from iic3: it is not compatible * RZ/G1N (r8a7744) SoC - Describe LVDS and DU devices in DT - Correct sort order of VSP and MSIOF noces * RZ/G1C (r8a7747) based iWave SBC - Enable RTC * RZ/A2M (r7s9210) SoC and EVB - Initial support * tag 'renesas-arm-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a7744: Add LVDS support ARM: dts: r8a7744: Add DU support ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB ARM: dts: r7s9210: Initial SoC device tree ARM: dts: r8a7779: Add HSCIF0/1 device nodes ARM: dts: r8a7778: Add HSCIF0/1 support ARM: dts: r8a7743: Fix sorting of rwdt node ARM: dts: r8a7743: Remove aliases from SoC dtsi ARM: dts: r8a7743: Remove generic compatible string from iic3 ARM: dts: r8a7744: Fix sorting of vsp and msiof nodes ARM: dts: iwg23s-sbc: Enable RTC ARM: dts: stout: Convert to new LVDS DT bindings Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Thomas Petazzoni
|
ede033e1e8 |
dt-bindings: gpio: document the new pull-up/pull-down flags
This commit extends the flags that can be used in GPIO specifiers to indicate if a pull-up resistor or pull-down resistor should be enabled. While some pinctrl DT bindings already offer the capability of configuring pull-up/pull-down resistors at the pin level, a number of simple GPIO controllers don't have any pinmuxing capability, and therefore do not rely on the pinctrl DT bindings. Such simple GPIO controllers however sometimes allow to configure pull-up and pull-down resistors on a per-pin basis, and whether such resistors should be enabled or not is a highly board-specific HW characteristic. By using two additional bits of the GPIO flag specifier, we can easily allow the Device Tree to describe which GPIOs should have their pull-up or pull-down resistors enabled. Even though the two options are mutually exclusive, we still need two bits to encode at least three states: no pull-up/pull-down, pull-up, pull-down. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Greg Kroah-Hartman
|
277c8e8b81 |
Second set of new device support, features and cleanup for IIO in the 5.1 cycle.
There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.
New device support
* ad7476
- add support for TI ADS786X parts that are compatible with this Analog
Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
- new driver and bindings
* Plantower PMS7003 partical sensor
- new driver and bindings including vendor prefix.
* TI DAC7612
- new driver and bindings for this dual DAC.
New features
* ad7768-1
- Sampling frequency control
* bmi160
- Data ready trigger support, including open-drain dt binding.
Cleanup / minor fixes.
* Analog Device DACs
- Fix some inconsistent licenses. These are only ones where there were
two different license marked in the same file, and hence were previously
unclear.
* ads124s08
- Spelling fix.
* adxl345
- Parameter alignement tidy up.
* bmi160
- SPDX
- correct a note on the types of supported interrupts which was too strict.
- use iio_pollfunc_store_time to grab an earlier timestamp.
- use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
some handling where ret was effectively getting written to 0 even though
it was always already 0.
* exynos_adc
- Fix a null pointer dereference on unbind.
- Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
- Move DT bindings doc out of staging. Oops, I missed this one when
moving the driver.
- SPDX.
* npcm-adc
- drop documentation of reset node as going to be done differently.
It's a new driver this cycle so no need to support the previous
binding going forwards.
* sps30
- Fix an issue with a loop timeout test that meant it would never identify
a timeout.
- Mark deliberate switch fall throughs.
-----BEGIN PGP SIGNATURE-----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=Se+F
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, features and cleanup for IIO in the 5.1 cycle.
There are a few late breaking fixes in here that weren't worth trying to
rush into 5.0 as they have been with us for quite a while.
New device support
* ad7476
- add support for TI ADS786X parts that are compatible with this Analog
Devices driver. Good to see some simple devices are so similar.
* Ingenic jz47xx SoC ADCs
- new driver and bindings
* Plantower PMS7003 partical sensor
- new driver and bindings including vendor prefix.
* TI DAC7612
- new driver and bindings for this dual DAC.
New features
* ad7768-1
- Sampling frequency control
* bmi160
- Data ready trigger support, including open-drain dt binding.
Cleanup / minor fixes.
* Analog Device DACs
- Fix some inconsistent licenses. These are only ones where there were
two different license marked in the same file, and hence were previously
unclear.
* ads124s08
- Spelling fix.
* adxl345
- Parameter alignement tidy up.
* bmi160
- SPDX
- correct a note on the types of supported interrupts which was too strict.
- use iio_pollfunc_store_time to grab an earlier timestamp.
- use if (ret) instead of if (ret < 0) to be consistent whilst simplifying
some handling where ret was effectively getting written to 0 even though
it was always already 0.
* exynos_adc
- Fix a null pointer dereference on unbind.
- Fix number of channels on Exynos4x12 devices to be 4 rather than 8.
* lpc32xx-adc
- Move DT bindings doc out of staging. Oops, I missed this one when
moving the driver.
- SPDX.
* npcm-adc
- drop documentation of reset node as going to be done differently.
It's a new driver this cycle so no need to support the previous
binding going forwards.
* sps30
- Fix an issue with a loop timeout test that meant it would never identify
a timeout.
- Mark deliberate switch fall throughs.
* tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
dt-binding: iio: remove rst node from NPCM ADC document
dt-bindings: iio: chemical: pms7003: add device tree support
dt-bindings: add Plantower to the vendor prefixes
iio: chemical: add support for Plantower PMS7003 sensor
iio:chemical:sps30 Supress some switch fallthrough warnings.
iio:adc:lpc32xx use SPDX-License-Identifier
dt-bindings: iio: adc: move lpc32xx-adc out of staging
iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions"
iio: adc: exynos-adc: Fix NULL pointer exception on unbind
iio: chemical: sps30: fix a loop timeout test
iio:accel:adxl345: Change alignment to match paranthesis
iio:dac:dac7612: device tree bindings
iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612
iio: adc: ad7476: Add support for TI ADS786X ADCs
iio: adc: ad7768-1: Add support for setting the sampling frequency
drivers: iio: dac: Fix wrong license for ADI drivers
IIO: add Ingenic JZ47xx ADC driver.
dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC.
...
|
||
Rajan Vaja
|
8fd27fb4cf |
dt-bindings: power: Add ZynqMP power domain bindings
Add documentation to describe ZynqMP power domain bindings. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> |
||
|
Linus Walleij
|
e65372124c |
Linux 5.0-rc6
-----BEGIN PGP SIGNATURE----- iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxgqNUeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwsoH+OVXu0NQofwTvVru 8lgF3BSDG2mhf7mxbBBlBizGVy9jnjRNGCFMC+Jq8IwiFLwprja/G27kaDTkpuF1 PHC3yfjKvjTeUP5aNdHlmxv6j1sSJfZl0y46DQal4UeTG/Giq8TFTi+Tbz7Wb/WV yCx4Lr8okAwTuNhnL8ojUCVIpd3c8QsyR9v6nEQ14Mj+MvEbokyTkMJV0bzOrM38 JOB+/X1XY4JPZ6o3MoXrBca3bxbAJzMneq+9CWw1U5eiIG3msg4a+Ua3++RQMDNr 8BP0yCZ6wo32S8uu0PI6HrZaBnLYi5g9Wh7Q7yc0mn1Uh1zWFykA6TtqK90agJeR A6Ktjw== =scY4 -----END PGP SIGNATURE----- Merge tag 'v5.0-rc6' into devel Linux 5.0-rc6 |
||
|
Greg Kroah-Hartman
|
5c07488d99 |
Merge 5.0-rc6 into char-misc-next
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Artur Rojek
|
7cf74d515b |
dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC.
Add device tree bindings for the ADC controller on JZ47xx SoCs, used by the ingenic-adc driver. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Linus Torvalds
|
46c291e277 |
ARM: SoC fixes for linux-5.0
This is a bit larger than normal, as we had not managed to send out
a pull request before traveling for a week without my signing key.
There are multiple code fixes for older bugs, all of which should
get backported into stable kernels:
- tango: one fix for multiplatform configurations broken on other
platforms when tango is enabled
- arm_scmi: device unregistration fix
- iop32x: fix kernel oops from extraneous __init annotation
- pxa: remove a double kfree
- fsl qbman: close an interrupt clearing race
The rest is the usual collection of smaller fixes for device tree
files, on the renesas, allwinner, meson, omap, davinci, qualcomm
and imx platforms. Some of these are for compile-time warnings,
most are for board specific functionality that fails to work
because of incorrect settings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=koHS
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a bit larger than normal, as we had not managed to send out a
pull request before traveling for a week without my signing key.
There are multiple code fixes for older bugs, all of which should get
backported into stable kernels:
- tango: one fix for multiplatform configurations broken on other
platforms when tango is enabled
- arm_scmi: device unregistration fix
- iop32x: fix kernel oops from extraneous __init annotation
- pxa: remove a double kfree
- fsl qbman: close an interrupt clearing race
The rest is the usual collection of smaller fixes for device tree
files, on the renesas, allwinner, meson, omap, davinci, qualcomm and
imx platforms.
Some of these are for compile-time warnings, most are for board
specific functionality that fails to work because of incorrect
settings"
* tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: tango: Improve ARCH_MULTIPLATFORM compatibility
firmware: arm_scmi: provide the mandatory device release callback
ARM: iop32x/n2100: fix PCI IRQ mapping
arm64: dts: add msm8996 compatible to gicv3
ARM: dts: am335x-shc.dts: fix wrong cd pin level
ARM: dts: n900: fix mmc1 card detect gpio polarity
ARM: dts: omap3-gta04: Fix graph_port warning
ARM: pxa: ssp: unneeded to free devm_ allocated data
ARM: dts: r8a7743: Convert to new LVDS DT bindings
soc: fsl: qbman: avoid race in clearing QMan interrupt
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
ARM: dts: da850: fix interrupt numbers for clocksource
dt-bindings: imx8mq: Number clocks consecutively
arm64: dts: meson: Fix mmc cd-gpios polarity
ARM: dts: imx6sx: correct backward compatible of gpt
ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property
ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
...
|
||
Jerome Brunet
|
dbfc54534d |
dt-bindings: reset: meson: add g12a bindings
Add device tree bindings for the reset controller of g12a SoC family. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
Claudiu Beznea
|
64e21add8c |
pinctrl: at91: add slewrate support for SAM9X60
Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
Weiyi Lu
|
cd10b9343d |
dt-bindings: soc: fix typo of MT8173 power dt-bindings
fix incorrect IC name that will affect the MT8183 power dt-bindings Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
Charles Keepax
|
fdc98f070b |
mfd: lochnagar: Add initial binding documentation
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Lee Jones
|
fa56a62d01 | Merge branches 'ib-mfd-iio-input-5.1', 'ib-mfd-input-watchdog-5.1' and 'ib-mfd-platform-5.1' into ibs-for-mfd-merged | ||
|
Linus Torvalds
|
5b4746a031 |
Mostly driver fixes, but there's a core framework fix in here too.
- Revert the commits that introduce clk management for the SP
clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good
idea and there isn't any need to manage this clk, it just causes
more headaches.
- A performance regression that went unnoticed for many years where
we would traverse the entire clk tree looking for a clk by name
when we already have the pointer to said clk that we're looking
for
- A parent linkage fix for the qcom SDM845 clk driver
- An i.MX clk driver rate miscalculation fix where order of operations
were messed up
- One error handling fix from the static checkers
-----BEGIN PGP SIGNATURE-----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=G4M9
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Mostly driver fixes, but there's a core framework fix in here too:
- Revert the commits that introduce clk management for the SP clk on
MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and
there isn't any need to manage this clk, it just causes more
headaches.
- A performance regression that went unnoticed for many years where
we would traverse the entire clk tree looking for a clk by name
when we already have the pointer to said clk that we're looking for
- A parent linkage fix for the qcom SDM845 clk driver
- An i.MX clk driver rate miscalculation fix where order of
operations were messed up
- One error handling fix from the static checkers"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Use active only source for CPUSS clocks
clk: ti: Fix error handling in ti_clk_parse_divider_data()
clk: imx: Fix fractional clock set rate computation
clk: Remove global clk traversal on fetch parent index
Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
Revert "clk: mmp2: add SP clock"
Revert "Input: olpc_apsp - enable the SP clock"
|
||
|
Arnd Bergmann
|
3673a91c07 |
Merge tag 'imx-fixes-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.0, 2nd round: It contains a single fix for i.MX8MQ clock numbers, removing the duplicate use of 232 and numbering the clocks consecutively. * tag 'imx-fixes-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: imx8mq: Number clocks consecutively Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Nava kishore Manne
|
3f1b66be4a |
dt-bindings: reset: Add bindings for ZynqMP reset driver
Add documentation to describe Xilinx ZynqMP reset driver bindings. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> |
||
Andrey Smirnov
|
4cab5bf616 |
dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
The driver now supports i.MX8MQ, so update bindings accordingly. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
||
|
Greg Kroah-Hartman
|
fdddcfd9c9 |
Merge 5.0-rc4 into char-misc-next
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Lubomir Rintel
|
401fbb34f5 |
Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
It seems that the kernel has no business managing this clock: once the SP
clock is disabled, it's not sufficient to just enable it in order to bring
the SP core back up.
Pretty sure nothing ever used this and it's safe to remove.
This reverts commit
|
||
Rajendra Nayak
|
c6e6eff4d4 |
dt-bindings: power: Add qcom rpm power domain driver bindings
Add DT bindings to describe the rpm/rpmh power domains found on Qualcomm Technologies, Inc. SoCs. These power domains communicate a performance state to RPM/RPMh, which then translates it into corresponding voltage on a PMIC rail. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> |
||
Felix Fietkau
|
6810ed320e
|
MIPS: ath79: export switch MDIO reference clock
On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz clock. If that feature is not used, it defaults to the main reference clock, like on all other SoC. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: John Crispin <john@phrozen.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org |
||
|
Felix Fietkau
|
9b56e0d0cc
|
MIPS: ath79: add helpers for setting clocks and expose the ref clock
Preparation for transitioning the legacy clock setup code over to OF. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: John Crispin <john@phrozen.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org |
||
David Dai
|
b5d2f74107 |
interconnect: qcom: Add sdm845 interconnect provider driver
Introduce Qualcomm SDM845 specific provider driver using the interconnect framework. Signed-off-by: David Dai <daidavid1@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Ulrich Hecht
|
adbb78e110 |
ARM: dts: r8a7778: Add HSCIF0/1 support
Add HSCIF0/1 clocks and device nodes, based on Rev. 1.00 of the R-Car M1A datasheet. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> [geert: Squashed two patches] [geert: Correct HSCIF1 module clock index] [geert: Correct reg properties for non-LPAE] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
|
Jerome Brunet
|
3705add0b7 |
dt-bindings: reset: meson-axg: fix SPDX license id
As reported, the SPDX license id is not placed correctly and the variant
of the BSD License used should be specified.
Fixes:
|
||
Pascal PAILLET-LME
|
3eafbd3a77 |
dt-bindings: mfd: Document STPMIC1
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. Signed-off-by: Pascal Paillet <p.paillet@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
Guido Günther
|
c5b11ee9f1 |
dt-bindings: imx8mq: Number clocks consecutively
This fixes a duplicate use of 232 and numbers the clocks without holes.
Fixes:
|
||
Eric Anholt
|
670c672608 |
soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
This provides a free software alternative to raspberrypi-power.c's firmware calls to manage power domains. It also exposes a reset line, where previously the vc4 driver had to try to force power off the domain in order to trigger a reset. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> |
||
|
Linus Torvalds
|
645ff1e8e7 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support |
||
|
Linus Torvalds
|
0f2107daec |
One more patch to generalize a set of DT binding defines now before -rc1
comes out. This way the SoC DTS files can use the proper defines from a stable tag. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlwmdjIRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSX8Iw//RZ3fJWCV5HdYO938SRl8mdn+kKc+8bfO Ng6abLS7hV79oB8G5sapYxS5BaoHw9O59NM2wldu+9vtM1s3cPlvPXJN60NQMHrA 9Bv8r5xOARKzcyou+0vCtWOVL0xt92KKU4fuPCgdP62OkeNppUeZqpoeVILZyOsz txfNX1CN6WdxPHWG4mxted8i1sX873EAdLsE+n8zEchfPk0ADZ/TEfKDlqHV9wAB XgFzk8W/ZyKg2zlNCwWIUBIk9IlqRUTnPArA9bzAgxMO6x0DT7W5LSgEHN0nk2kl uhLDjxcXUtQKic14hzlnBHDN+aSaCtrdUsoxxlgoyyq+cDh8eC9keh4DsBu32nBk ETQ00DteZWaPSMuqphQ6rOye3X/ff42cQREZCxo5anuUt2ekgwdCiS64XU/id+tk 1YdTGgiwiZTBZCTlvWqvoOpU2OannD7c2dEML9X7evM0H35f2KjNFODtWEDedDSg BFyP62gFs7063Pdz02wUdS37m6iC2WDbZioSUw+NJjSnnX4N4Uz7zI/Xh2AhwLwT 9bECXexsg2qUTSFbEvLsTTasE551bSqOJ5VzJuDwTL6OdmeLYEv+H+ZY5z/8lYkF gLx2rfo63P/2YljkVjKFxValu3jDUbt26ePEa0J9N4WK17CS28L6BXnC7TdEqNhP +Hs380jUFXw= =mZr0 -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "One more patch to generalize a set of DT binding defines now before -rc1 comes out. This way the SoC DTS files can use the proper defines from a stable tag" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx8qxp: make the name of clock ID generic |
||
|
Linus Torvalds
|
35ddb06a46 |
- Introduce device-managed registration devm_mbox_controller_un/register and convert drivers to use it
- Introduce flush api to support clients that must busy-wait in atomic context - Support multiple controllers per device - Hi3660: a bugfix and constify ops structure - TI-MsgMgr: off by one bugfix. - BCM: switch to spdx license - Tegra-HSP: support for shared mailboxes and suspend/resume. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAlwsSx4ACgkQf9lkf8eY P5V7VBAAkYp05XY1IsH5x1nSqhFb+cco0pv0kwO3Sr+IhYgC3i5aD2JMtIGu3N34 8lFrNXbrodDFsY37dAd8YDP4zoJ6LGmB9Z7brjuce/Mlgj63Z7EV5R+PW6UC/thP ul9RVM3d0YoRfutHz0p8+0vgB2d90Npng6f1XhNBwniWNtzFm1QoDl/rr5QI/126 tdgpuC/79fl1ymuzrBxMx7Yn5LG4P5B834gip16qiKlhaawL98nmWoF0EyIFwSMN Oo4yxpiMPsLC1Jt9EygXOHyybt1WSgCGlKV0fk6iiugR2YmDfVaiASq8e1gBN9W8 8ILFxEFkfbR4uat3fDErymGmdQrt0pFeSBnwej30JS/GTASz5i0XAIfpVYL113t9 WzsMR8YZGW3hk1Z+ZXJhecszYhDg4GAfew2kADqmdBeG6JX8eBn0wYFRFYjYPsXR idrsWkuzYmNXUaFg10Un3OgVwmpnhB7QmiKXTeqpWkcYlrI8MiljwAK+wXh2/23S vxM+hdbKLQ++0m6iMz/9HE3b5LJlJtXwz5UDagWvgr6t0UTxviPK7xpjvgvRlUny OYd2UuC0X3dHWWflST6eWR4hWqc96KHLsTAn3X9nm+S41ijZHU+MS3B/F1Z5R1LS tU3V0JK5Q+61Va5brSr7/XO3TEy+5n1jWl92SGnayFuqnVaXZyQ= =b4QB -----END PGP SIGNATURE----- Merge tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - Introduce device-managed registration devm_mbox_controller_un/register and convert drivers to use it - Introduce flush api to support clients that must busy-wait in atomic context - Support multiple controllers per device - Hi3660: a bugfix and constify ops structure - TI-MsgMgr: off by one bugfix. - BCM: switch to spdx license - Tegra-HSP: support for shared mailboxes and suspend/resume. * tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (30 commits) mailbox: tegra-hsp: Use device-managed registration API mailbox: tegra-hsp: use devm_kstrdup_const() mailbox: tegra-hsp: Add suspend/resume support mailbox: tegra-hsp: Add support for shared mailboxes dt-bindings: tegra186-hsp: Add shared mailboxes mailbox: Allow multiple controllers per device mailbox: Support blocking transfers in atomic context mailbox: ti-msgmgr: Use device-managed registration API mailbox: stm32-ipcc: Use device-managed registration API mailbox: rockchip: Use device-managed registration API mailbox: qcom-apcs: Use device-managed registration API mailbox: platform-mhu: Use device-managed registration API mailbox: omap: Use device-managed registration API mailbox: mtk-cmdq: Remove needless devm_kfree() calls mailbox: mtk-cmdq: Use device-managed registration API mailbox: xgene-slimpro: Use device-managed registration API mailbox: sti: Use device-managed registration API mailbox: altera: Use device-managed registration API mailbox: imx: Use device-managed registration API mailbox: hi6220: Use device-managed registration API ... |
||
|
Linus Torvalds
|
78e8696c23 |
dmaengine-4.21-rc1
dmaengine updates for v4.21-rc1 - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcKipaAAoJEHwUBw8lI4NH87kQAJF5tSQzvh4alAwntJ+rNZfw bgiUW29f7PxEzEGDsTBuFsw9zPhGxPnwtXzLm2iSDBGqkEcwKc+yretuX3Pgkce+ IpPkCBGcfXptSJxFz4XxBi3HCkZ+jlhy33pH+hkW/tA4SIcA+VJjfQLePiY3sVMO 1QUFDaL9NEyEfgJTmUShaPvCiz+3OHjY/3LAMlbLqQer4C9zC3iyvZIf9lvPQQnt qJaFuEiqlhw6eOAGw+2frMYDEV57QEiRgghBZyFm5RxG19XCcPkVV9id22rz5TQb +mQXhyaLvDiztWf71dFlXW2nW8mjewcjNU4h5g3RTyLA7fpLNcpMyZY2WizIADVS x6a7/HSrDjD4CN6pGDmRi8vvqkTAEDCsrfUM6K43rAsoZzU5elVJwOv4m8WB3CCF pRlUwFi6ENt8Ov8CWgCCaY0/Bzj1FgjN3BY87amBsI9wF4fkpCPNdWw34a6lg1Kf SzyPty8Z+i+6rtKps7Mh9VOZI2tryPJzyAWrcOCDWQoiR/RWzgC3y6SuwCdiyaDf 8hFV4xnB0oVJ8vsTjF1AgxVwEsqQ7TVTIsLAns6jEnTC5FAnOLd0iwh56a+rw+lR 7e1iuQYllZ1rdMi+r5gWG4OCsZehmZgCqc250om51tzA1SDVDQ3bbx8clxZeha80 AKr5MVrIVp7riYFEICvp =+pTt -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: "This includes a new driver, removes R-Mobile APE6 as it is no longer used, sprd cyclic dma support, last batch of dma_slave_config direction removal and random updates to bunch of drivers. Summary: - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers" * tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits) dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: pxa: remove DBGFS_FUNC_DECL() dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: Documentation: Add documentation for multi chan testing dmaengine: dmatest: Add transfer_size parameter dmaengine: dmatest: Add alignment parameter dmaengine: dmatest: Use fixed point div to calculate iops dmaengine: dmatest: Add support for multi channel testing dmaengine: rcar-dmac: Document R8A774C0 bindings dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave dmaengine: sprd: Add me as one of the module authors dmaengine: sprd: Support DMA 2-stage transfer mode dmaengine: sprd: Support DMA link-list cyclic callback dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel dmaengine: sprd: Fix the last link-list configuration dmaengine: sprd: Get transfer residue depending on the transfer direction dmaengine: sprd: Remove direction usage from struct dma_slave_config dmaengine: dmatest: fix a small memory leak in dmatest_func() ... |
||
|
Linus Torvalds
|
c9bef4a651 |
Pin control bulk changes for the v4.21 kernel cycle:
No core changes this time.
New drivers:
- NXP (ex Freescale) i.MX 8 QXP SoC driver.
- Mediatek MT6797 SoC driver.
- Mediatek MT7629 SoC driver.
- Actions Semiconductor S700 SoC driver.
- Renesas RZ/A2 SoC driver.
- Allwinner sunxi suniv F1C100 SoC driver.
- Qualcomm PMS405 PMIC driver.
- Microsemi Ocelot Jaguar2 SoC driver.
Improvements:
- Some RT improvements (using raw spinlocks where appropriate).
- A lot of new pin sets on the Renesas PFC pin controllers.
- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.
- Major modernization of the Intel pin control drivers.
- STM32 pin control driver will now synchronize usage of pins
with another CPU using a hardware spinlock.
-----BEGIN PGP SIGNATURE-----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=cm6m
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have no core changes but lots of incremental development in drivers
all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
keep churning out new SoCs.
I have some subtree maintainers for Renesas and Intel helping out to
keep down the load, it's been working smoothly (Samsung also have a
subtree but it was not used this cycle.)
New drivers:
- NXP (ex Freescale) i.MX 8 QXP SoC driver.
- Mediatek MT6797 SoC driver.
- Mediatek MT7629 SoC driver.
- Actions Semiconductor S700 SoC driver.
- Renesas RZ/A2 SoC driver.
- Allwinner sunxi suniv F1C100 SoC driver.
- Qualcomm PMS405 PMIC driver.
- Microsemi Ocelot Jaguar2 SoC driver.
Improvements:
- Some RT improvements (using raw spinlocks where appropriate).
- A lot of new pin sets on the Renesas PFC pin controllers.
- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.
- Major modernization of the Intel pin control drivers.
- STM32 pin control driver will now synchronize usage of pins with
another CPU using a hardware spinlock"
* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
pinctrl: imx-scu: Depend on IMX_SCU
pinctrl: ocelot: Add dependency on HAS_IOMEM
pinctrl: ocelot: add MSCC Jaguar2 support
pinctrl: bcm: ns: support updated DT binding as syscon subnode
dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
MAINTAINERS: merge at91 pinctrl entries
pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
pinctrl: uniphier: constify uniphier_pinctrl_socdata
pinctrl: mediatek: improve Kconfig dependencies
pinctrl: msm: mark PM functions as __maybe_unused
dt-bindings: pinctrl: sunxi: Add supply properties
pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
...
|
||
|
Linus Torvalds
|
b7badd1d7a |
ARM: Device-tree updates
As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqgVYPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3ybAQAKAhd7XI5oY/wgdZZmxwcX+p7sU6LXeIlpWU XsPN1c14KU0siQv/znVA5OpF+fgn9eRqfWnMoDPlvdScTq07FM2NBmOJfVJYDPJa uvsll5m+84FCYanIR//YybS0tCM0b0BHoHo2DoyIxWeAwmw7BBVslddBdNg6R7hG S9rU9rUeqfCj7HbcPLqVn0DecMtEe7R8zmDtG1CSMqrhncifmoV4gtUnbYAg0GGT cSvj/zT8A1j0oJcU2Upl/Fr+7WJ7XB9pnku91nUOSXLv5VkyctLGomKq5F7O2/Xs 2DhpH2yKwQt7S7TDiDd0jy64Of6+Xup35wEHevCeKrzGXcVRqqHwCkanLz9FdjVt yg4UrI/P1nY7h4ifZPplgigv+kA+IjRGiMrTRIEgSE5YK9U5AYkgembTWksRDikd 5EpeJcMj2tBv4SDellNNtzh6GGTPBf3GJw3P9uRuxnQY/T31N2eX0XGeRikL+Lzf 9nbQdJealmql3rCa5oFEJwSxrSaAv/ub7/294kPdEmXj8+3qUuH3hZAZOI9LSXGW GCuxsgccB2GF1M48x48/QpHgxb93okyXmndONZnU8uN8ba0zS4b8QLwvIY5rqv5Z kqD1VPBQf9kGVyzDyABRjFmGCDJcoOJf4QrzvNk9+xo8fXVk1xNtxu4MUsHvc2lS cU2RYWm/ =sFVi -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ... |
||
|
Linus Torvalds
|
d36377c6eb |
ARM: SoC driver updates
Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
+ misc cleanups across several platforms
-----BEGIN PGP SIGNATURE-----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=yEX2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
|