The xfrm interface uses skb->protocol to determine packet type, and
bails out if it's not set. For AF_PACKET injection, we need to support
its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and xfrmi rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit ed17b8d377 ("xfrm: fix a warning in xfrm_policy_insert_list"),
it would take 'priority' to make a policy unique, and allow duplicated
policies with different 'priority' to be added, which is not expected
by userland, as Tobias reported in strongswan.
To fix this duplicated policies issue, and also fix the issue in
commit ed17b8d377 ("xfrm: fix a warning in xfrm_policy_insert_list"),
when doing add/del/get/update on user interfaces, this patch is to change
to look up a policy with both mark and mask by doing:
mark.v == pol->mark.v && mark.m == pol->mark.m
and leave the check:
(mark & pol->mark.m) == pol->mark.v
for tx/rx path only.
As the userland expects an exact mark and mask match to manage policies.
v1->v2:
- make xfrm_policy_mark_match inline and fix the changelog as
Tobias suggested.
Fixes: 295fae5688 ("xfrm: Allow user space manipulation of SPD mark")
Fixes: ed17b8d377 ("xfrm: fix a warning in xfrm_policy_insert_list")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
RFC 4303 in section 3.3.3 suggests to disable anti-replay for manually
distributed ICVs in which case the sender does not need to monitor or
reset the counter. However, the sender still increments the counter and
when it reaches the maximum value, the counter rolls over back to zero.
This patch introduces new extra_flag XFRM_SA_XFLAG_OSEQ_MAY_WRAP which
allows sequence number to cycle in outbound packets if set. This flag is
used only in legacy and bmp code, because esn should not be negotiated
if anti-replay is disabled (see note in 3.3.3 section).
Signed-off-by: Petr Vaněk <pv@excello.cz>
Acked-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Rather than requiring every hw crypto capable NIC driver to do a check for
slave_dev being set, set real_dev in the xfrm layer and xso init time, and
then override it in the bonding driver as needed. Then NIC drivers can
always use real_dev, and at the same time, we eliminate the use of a
variable name that probably shouldn't have been used in the first place,
particularly given recent current events.
CC: Boris Pismenny <borisp@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Leon Romanovsky <leon@kernel.org>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
Suggested-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is prep work for initial support of bonding hardware encryption
pass-through support. The bonding driver will fill in the slave_dev
pointer, and we use that to know not to skb_push() again on a given
skb that was already processed on the bond device.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-06-19
1) Fix double ESP trailer insertion in IPsec crypto offload if
netif_xmit_frozen_or_stopped is true. From Huy Nguyen.
2) Merge fixup for "remove output_finish indirection from
xfrm_state_afinfo". From Stephen Rothwell.
3) Select CRYPTO_SEQIV for ESP as this is needed for GCM and several
other encryption algorithms. Also modernize the crypto algorithm
selections for ESP and AH, remove those that are maked as "MUST NOT"
and add those that are marked as "MUST" be implemented in RFC 8221.
From Eric Biggers.
Please note the merge conflict between commit:
a7f7f6248d ("treewide: replace '---help---' in Kconfig files with 'help'")
from Linus' tree and commits:
7d4e391959 ("esp, ah: consolidate the crypto algorithm selections")
be01369859 ("esp, ah: modernize the crypto algorithm selections")
from the ipsec tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The crypto algorithms selected by the ESP and AH kconfig options are
out-of-date with the guidance of RFC 8221, which lists the legacy
algorithms MD5 and DES as "MUST NOT" be implemented, and some more
modern algorithms like AES-GCM and HMAC-SHA256 as "MUST" be implemented.
But the options select the legacy algorithms, not the modern ones.
Therefore, modify these options to select the MUST algorithms --
and *only* the MUST algorithms.
Also improve the help text.
Note that other algorithms may still be explicitly enabled in the
kconfig, and the choice of which to actually use is still controlled by
userspace. This change only modifies the list of algorithms for which
kernel support is guaranteed to be present.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Suggested-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit f23efcbcc5 ("crypto: ctr - no longer needs CRYPTO_SEQIV") made
CRYPTO_CTR stop selecting CRYPTO_SEQIV. This breaks IPsec for most
users since GCM and several other encryption algorithms require "seqiv"
-- and RFC 8221 lists AES-GCM as "MUST" be implemented.
Just make XFRM_ESP select CRYPTO_SEQIV.
Fixes: f23efcbcc5 ("crypto: ctr - no longer needs CRYPTO_SEQIV")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Instead of duplicating the algorithm selections between INET_AH and
INET6_AH and between INET_ESP and INET6_ESP, create new tristates
XFRM_AH and XFRM_ESP that do the algorithm selections, and make these be
selected by the corresponding INET* options.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
During IPsec performance testing, we see bad ICMP checksum. The error packet
has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call
is from ip_output, but the packet cannot be sent because
netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second
call is from NET_TX softirq. However after the first call, the packet already
has the ESP trailer.
Fix by marking the skb with XFRM_XMIT bit after the packet is handled by
validate_xmit_xfrm to avoid duplicate ESP trailer insertion.
Fixes: f6e27114a6 ("net: Add a xfrm validate function to validate_xmit_skb")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to fix a crash:
[ ] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ ] general protection fault: 0000 [#1] SMP KASAN PTI
[ ] RIP: 0010:ipv6_local_error+0xac/0x7a0
[ ] Call Trace:
[ ] xfrm6_local_error+0x1eb/0x300
[ ] xfrm_local_error+0x95/0x130
[ ] __xfrm6_output+0x65f/0xb50
[ ] xfrm6_output+0x106/0x46f
[ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel]
[ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan]
[ ] vxlan_xmit+0x6a0/0x4276 [vxlan]
[ ] dev_hard_start_xmit+0x165/0x820
[ ] __dev_queue_xmit+0x1ff0/0x2b90
[ ] ip_finish_output2+0xd3e/0x1480
[ ] ip_do_fragment+0x182d/0x2210
[ ] ip_output+0x1d0/0x510
[ ] ip_send_skb+0x37/0xa0
[ ] raw_sendmsg+0x1b4c/0x2b80
[ ] sock_sendmsg+0xc0/0x110
This occurred when sending a v4 skb over vxlan6 over ipsec, in which case
skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in
xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries
to get ipv6 info from a ipv4 sk.
This issue was actually fixed by Commit 628e341f31 ("xfrm: make local
error reporting more robust"), but brought back by Commit 844d48746e
("xfrm: choose protocol family by skb protocol").
So to fix it, we should call xfrm6_local_error() only when skb->protocol
is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.
Fixes: 844d48746e ("xfrm: choose protocol family by skb protocol")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This waring can be triggered simply by:
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 1 mark 0 mask 0x10 #[1]
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 2 mark 0 mask 0x1 #[2]
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 2 mark 0 mask 0x10 #[3]
Then dmesg shows:
[ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548
[ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030
[ ] Call Trace:
[ ] xfrm_policy_inexact_insert+0x85/0xe50
[ ] xfrm_policy_insert+0x4ba/0x680
[ ] xfrm_add_policy+0x246/0x4d0
[ ] xfrm_user_rcv_msg+0x331/0x5c0
[ ] netlink_rcv_skb+0x121/0x350
[ ] xfrm_netlink_rcv+0x66/0x80
[ ] netlink_unicast+0x439/0x630
[ ] netlink_sendmsg+0x714/0xbf0
[ ] sock_sendmsg+0xe2/0x110
The issue was introduced by Commit 7cb8a93968 ("xfrm: Allow inserting
policies with matching mark and different priorities"). After that, the
policies [1] and [2] would be able to be added with different priorities.
However, policy [3] will actually match both [1] and [2]. Policy [1]
was matched due to the 1st 'return true' in xfrm_policy_mark_match(),
and policy [2] was matched due to the 2nd 'return true' in there. It
caused WARN_ON() in xfrm_policy_insert_list().
This patch is to fix it by only (the same value and priority) as the
same policy in xfrm_policy_mark_match().
Thanks to Yuehaibing, we could make this fix better.
v1->v2:
- check policy->mark.v == pol->mark.v only without mask.
Fixes: 7cb8a93968 ("xfrm: Allow inserting policies with matching mark and different priorities")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
There are only two implementaions, one for ipv4 and one for ipv6.
Both are almost identical, they clear skb->cb[], set the TRANSFORMED flag
in IP(6)CB and then call the common xfrm_output() function.
By placing the IPCB handling into the common function, we avoid the need
for the output_finish indirection as the output functions can simply
use xfrm_output().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Move this to xfrm_output.c. This avoids the state->extract_output
indirection.
This patch also removes the duplicated __xfrm6_extract_header helper
added in an earlier patch, we can now use the one from xfrm_inout.h .
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The function only initializes the XFRM CB in the skb.
After previous patch xfrm4_extract_header is only called from
net/xfrm/xfrm_{input,output}.c.
Because of IPV6=m linker errors the ipv6 equivalent
(xfrm6_extract_header) was already placed in xfrm_inout.h because
we can't call functions residing in a module from the core.
So do the same for the ipv4 helper and place it next to the ipv6 one.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be
duplicated. It will be removed again in a followup change when the
remaining caller is moved to net/xfrm as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We can use a direct call for ipv4, so move the needed functions
to net/xfrm/xfrm_output.c and call them directly.
For ipv6 the indirection can be avoided as well but it will need
a bit more work -- to ease review it will be done in another patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This extends espintcp to support IPv6, building on the existing code
and the new UDPv6 encapsulation support. Most of the code is either
reused directly (stream parser, ULP) or very similar to the IPv4
variant (net/ipv6/esp6.c changes).
The separation of config options for IPv4 and IPv6 espintcp requires a
bit of Kconfig gymnastics to enable the core code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily add espintcp on IPv6 as a follow-up.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
I don't see any reason to do this. Maybe needed before
commit 56c5ee1a58 ("xfrm interface: fix memory leak on creation").
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
An use-after-free crash can be triggered when sending big packets over
vxlan over esp with esp offload enabled:
[] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
[] Call Trace:
[] dump_stack+0x75/0xa0
[] kasan_report+0x37/0x50
[] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
[] ipv6_gso_segment+0x2c8/0x13c0
[] skb_mac_gso_segment+0x1cb/0x420
[] skb_udp_tunnel_segment+0x6b5/0x1c90
[] inet_gso_segment+0x440/0x1380
[] skb_mac_gso_segment+0x1cb/0x420
[] esp4_gso_segment+0xae8/0x1709 [esp4_offload]
[] inet_gso_segment+0x440/0x1380
[] skb_mac_gso_segment+0x1cb/0x420
[] __skb_gso_segment+0x2d7/0x5f0
[] validate_xmit_skb+0x527/0xb10
[] __dev_queue_xmit+0x10f8/0x2320 <---
[] ip_finish_output2+0xa2e/0x1b50
[] ip_output+0x1a8/0x2f0
[] xfrm_output_resume+0x110e/0x15f0
[] __xfrm4_output+0xe1/0x1b0
[] xfrm4_output+0xa0/0x200
[] iptunnel_xmit+0x5a7/0x920
[] vxlan_xmit_one+0x1658/0x37a0 [vxlan]
[] vxlan_xmit+0x5e4/0x3ec8 [vxlan]
[] dev_hard_start_xmit+0x125/0x540
[] __dev_queue_xmit+0x17bd/0x2320 <---
[] ip6_finish_output2+0xb20/0x1b80
[] ip6_output+0x1b3/0x390
[] ip6_xmit+0xb82/0x17e0
[] inet6_csk_xmit+0x225/0x3d0
[] __tcp_transmit_skb+0x1763/0x3520
[] tcp_write_xmit+0xd64/0x5fe0
[] __tcp_push_pending_frames+0x8c/0x320
[] tcp_sendmsg_locked+0x2245/0x3500
[] tcp_sendmsg+0x27/0x40
As on the tx path of vxlan over esp, skb->inner_network_header would be
set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can
overwrite the former one. It causes skb_udp_tunnel_segment() to use a
wrong skb->inner_network_header, then the issue occurs.
This patch is to fix it by calling xfrm_output_gso() instead when the
inner_protocol is set, in which gso_segment of inner_protocol will be
done first.
While at it, also improve some code around.
Fixes: 7862b4058b ("esp: Add gso handlers for esp4 and esp6")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When ESP encapsulation is enabled on a TCP socket, I'm replacing the
existing ->sk_destruct callback with espintcp_destruct. We still need to
call the old callback to perform the other cleanups when the socket is
destroyed. Save the old callback, and call it from espintcp_destruct.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For transport mode, when ipv6 nexthdr is set, the packet format might
be like:
----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------
and in __xfrm_transport_prep():
pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len);
it will pull the data pointer to the wrong position, as it missed the
nexthdrs/dest opts.
This patch is to fix it by using:
pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len);
as we can be sure transport_header points to ESP header at that moment.
It also fixes a panic when packets with ipv6 nexthdr are sent over
esp6 transport mode:
[ 100.473845] kernel BUG at net/core/skbuff.c:4325!
[ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260
[ 100.494355] Call Trace:
[ 100.494829] skb_to_sgvec+0x11/0x40
[ 100.495492] esp6_output_tail+0x12e/0x550 [esp6]
[ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload]
[ 100.498029] validate_xmit_xfrm+0x22f/0x2e0
[ 100.499604] __dev_queue_xmit+0x589/0x910
[ 100.502928] ip6_finish_output2+0x2a5/0x5a0
[ 100.503718] ip6_output+0x6c/0x120
[ 100.505198] xfrm_output_resume+0x4bf/0x530
[ 100.508683] xfrm6_output+0x3a/0xc0
[ 100.513446] inet6_csk_xmit+0xa1/0xf0
[ 100.517335] tcp_sendmsg+0x27/0x40
[ 100.517977] sock_sendmsg+0x3e/0x60
[ 100.518648] __sys_sendto+0xee/0x160
Fixes: c35fe4106b ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For beet mode, when it's ipv6 inner address with nexthdrs set,
the packet format might be:
----------------------------------------------------
| outer | | dest | | | ESP | ESP |
| IP hdr | ESP | opts.| TCP | Data | Trailer | ICV |
----------------------------------------------------
The nexthdr from ESP could be NEXTHDR_HOP(0), so it should
continue processing the packet when nexthdr returns 0 in
xfrm_input(). Otherwise, when ipv6 nexthdr is set, the
packet will be dropped.
I don't see any error cases that nexthdr may return 0. So
fix it by removing the check for nexthdr == 0.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-03-28
1) Use kmem_cache_zalloc() instead of kmem_cache_alloc()
in xfrm_state_alloc(). From Huang Zijiang.
2) esp_output_fill_trailer() is the same in IPv4 and IPv6,
so share this function to avoide code duplcation.
From Raed Salem.
3) Add offload support for esp beet mode.
From Xin Long.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The SKB_SGO_CB_OFFSET should be SKB_GSO_CB_OFFSET which means the
offset of the GSO in skb cb. This patch fixes the typo.
Fixes: 9207f9d45b ("net: preserve IP control block during GSO segmentation")
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2020-03-27
1) Handle NETDEV_UNREGISTER for xfrm device to handle asynchronous
unregister events cleanly. From Raed Salem.
2) Fix vti6 tunnel inter address family TX through bpf_redirect().
From Nicolas Dichtel.
3) Fix lenght check in verify_sec_ctx_len() to avoid a
slab-out-of-bounds. From Xin Long.
4) Add a missing verify_sec_ctx_len check in xfrm_add_acquire
to avoid a possible out-of-bounds to access. From Xin Long.
5) Use built-in RCU list checking of hlist_for_each_entry_rcu
to silence false lockdep warning in __xfrm6_tunnel_spi_lookup
when CONFIG_PROVE_RCU_LIST is enabled. From Madhuparna Bhowmik.
6) Fix a panic on esp offload when crypto is done asynchronously.
From Xin Long.
7) Fix a skb memory leak in an error path of vti6_rcv.
From Torsten Hilbrich.
8) Fix a race that can lead to a doulbe free in xfrm_policy_timer.
From Xin Long.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Like __xfrm_transport/mode_tunnel_prep(), this patch is to add
__xfrm_mode_beet_prep() to fix the transport_header for gso
segments, and reset skb mac_len, and pull skb data to the
proto inside esp.
This patch also fixes a panic, reported by ltp:
# modprobe esp4_offload
# runltp -f net_stress.ipsec_tcp
[ 2452.780511] kernel BUG at net/core/skbuff.c:109!
[ 2452.799851] Call Trace:
[ 2452.800298] <IRQ>
[ 2452.800705] skb_push.cold.98+0x14/0x20
[ 2452.801396] esp_xmit+0x17b/0x270 [esp4_offload]
[ 2452.802799] validate_xmit_xfrm+0x22f/0x2e0
[ 2452.804285] __dev_queue_xmit+0x589/0x910
[ 2452.806264] __neigh_update+0x3d7/0xa50
[ 2452.806958] arp_process+0x259/0x810
[ 2452.807589] arp_rcv+0x18a/0x1c
It was caused by the skb going to esp_xmit with a wrong transport
header.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After xfrm_add_policy add a policy, its ref is 2, then
xfrm_policy_timer
read_lock
xp->walk.dead is 0
....
mod_timer()
xfrm_policy_kill
policy->walk.dead = 1
....
del_timer(&policy->timer)
xfrm_pol_put //ref is 1
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_pol_hold //ref is 1
read_unlock
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_policy_destroy is called twice, which may leads to
double free.
Call Trace:
RIP: 0010:refcount_warn_saturate+0x161/0x210
...
xfrm_policy_timer+0x522/0x600
call_timer_fn+0x1b3/0x5e0
? __xfrm_decode_session+0x2990/0x2990
? msleep+0xb0/0xb0
? _raw_spin_unlock_irq+0x24/0x40
? __xfrm_decode_session+0x2990/0x2990
? __xfrm_decode_session+0x2990/0x2990
run_timer_softirq+0x5c5/0x10e0
Fix this by use write_lock_bh in xfrm_policy_kill.
Fixes: ea2dea9dac ("xfrm: remove policy lock when accessing policy->walk.dead")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previous changes to the IP routing code have removed all the
tests for the DS_HOST route flag.
Remove the flags and all the code that sets it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiumei found a panic in esp offload:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
RIP: 0010:esp_output_done+0x101/0x160 [esp4]
Call Trace:
? esp_output+0x180/0x180 [esp4]
cryptd_aead_crypt+0x4c/0x90
cryptd_queue_worker+0x6e/0xa0
process_one_work+0x1a7/0x3b0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x35/0x40
It was caused by that skb secpath is used in esp_output_done() after it's
been released elsewhere.
The tx path for esp offload is:
__dev_queue_xmit()->
validate_xmit_skb_list()->
validate_xmit_xfrm()->
esp_xmit()->
esp_output_tail()->
aead_request_set_callback(esp_output_done) <--[1]
crypto_aead_encrypt() <--[2]
In [1], .callback is set, and in [2] it will trigger the worker schedule,
later on a kernel thread will call .callback(esp_output_done), as the call
trace shows.
But in validate_xmit_xfrm():
skb_list_walk_safe(skb, skb2, nskb) {
...
err = x->type_offload->xmit(x, skb2, esp_features); [esp_xmit]
...
}
When the err is -EINPROGRESS, which means this skb2 will be enqueued and
later gets encrypted and sent out by .callback later in a kernel thread,
skb2 should be removed fromt skb chain. Otherwise, it will get processed
again outside validate_xmit_xfrm(), which could release skb secpath, and
cause the panic above.
This patch is to remove the skb from the chain when it's enqueued in
cryptd_wq. While at it, remove the unnecessary 'if (!skb)' check.
Fixes: 3dca3f38cf ("xfrm: Separate ESP handling from segmentation for GRO packets.")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The only users for such argument are the UDP protocol and the UNIX
socket family. We can safely reclaim the accounted memory directly
from the UDP code and, after the previous patch, we can do scm
stats accounting outside the datagram helpers.
Overall this cleans up a bit some datagram-related helpers, and
avoids an indirect call per packet in the UDP receive path.
v1 -> v2:
- call scm_stat_del() only when not peeking - Kirill
- fix build issue with CONFIG_INET_ESPINTCP
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kmem_cache_zalloc instead of manually setting kmem_cache_alloc
with flag GFP_ZERO since kzalloc sets allocated memory
to zero.
Change in v2:
add indation
Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Because xfrmi is calling icmp from network device context, it should use
the ndo helper so that the rate limiting applies correctly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be
out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by
syz:
BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430
Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650
Call Trace:
dump_stack+0xe8/0x16e
print_address_description.cold.3+0x9/0x23b
kasan_report.cold.4+0x64/0x95
memcpy+0x1f/0x50
selinux_xfrm_alloc_user+0x237/0x430
security_xfrm_policy_alloc+0x5c/0xb0
xfrm_policy_construct+0x2b1/0x650
xfrm_add_acquire+0x21d/0xa10
xfrm_user_rcv_msg+0x431/0x6f0
netlink_rcv_skb+0x15a/0x410
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x50e/0x6a0
netlink_sendmsg+0x8ae/0xd40
sock_sendmsg+0x133/0x170
___sys_sendmsg+0x834/0x9a0
__sys_sendmsg+0x100/0x1e0
do_syscall_64+0xe5/0x660
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
So fix it by adding the missing verify_sec_ctx_len check there.
Fixes: 980ebd2579 ("[IPSEC]: Sync series - acquire insert")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) +
uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt),
in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str
later.
This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).
Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch to handle the asynchronous unregister
device event so the device IPsec offload resources
could be cleanly released.
Fixes: e4db5b61c5 ("xfrm: policy: remove pcpu policy cache")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-01-21
1) Add support for TCP encapsulation of IKE and ESP messages,
as defined by RFC 8229. Patchset from Sabrina Dubroca.
Please note that there is a merge conflict in:
net/unix/af_unix.c
between commit:
3c32da19a8 ("unix: Show number of pending scm files of receive queue in fdinfo")
from the net-next tree and commit:
b50b0580d2 ("net: add queue argument to __skb_wait_for_more_packets and __skb_{,try_}recv_datagram")
from the ipsec-next tree.
The conflict can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is converts xfrm segment iteration to use the new function, keeping
the flow of the existing code as intact as possible. One case is very
straight-forward, whereas the other case has some more subtle code that
likes to peak at ->next and relink skbs. By keeping the variables the
same as before, we can upgrade this code with minimal surgery required.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
With an ebpf program that redirects packets through a xfrm interface,
packets are dropped because no dst is attached to skb.
This could also be reproduced with an AF_PACKET socket, with the following
python script (xfrm1 is a xfrm interface):
import socket
send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)
# scapy
# p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
# raw(p)
req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
send_s.sendto(req, ('xfrm1', 0x800, 0, 0))
It was also not possible to send an ip packet through an AF_PACKET socket
because a LL header was expected. Let's remove those LL header constraints.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
TCP encapsulation of IKE and IPsec messages (RFC 8229) is implemented
as a TCP ULP, overriding in particular the sendmsg and recvmsg
operations. A Stream Parser is used to extract messages out of the TCP
stream using the first 2 bytes as length marker. Received IKE messages
are put on "ike_queue", waiting to be dequeued by the custom recvmsg
implementation. Received ESP messages are sent to XFRM, like with UDP
encapsulation.
Some of this code is taken from the original submission by Herbert
Xu. Currently, only IPv4 is supported, like for UDP encapsulation.
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This will be used by TCP encapsulation to write packets to the encap
socket without holding the user socket's lock. Without this reinjection,
we're already holding the lock of the user socket, and then try to lock
the encap socket as well when we enqueue the encrypted packet.
While at it, add a BUILD_BUG_ON like we usually do for skb->cb, since
it's missing for struct xfrm_trans_cb.
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style. This fixes various indentation mixups (seven spaces,
tab+one space, etc).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-11-13
1) Remove a unnecessary net_exit function from the xfrm interface.
From Xin Long.
2) Assign xfrm4_udp_encap_rcv to a UDP socket only if xfrm
is configured. From Alexey Dobriyan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
An ESP packet could be decrypted in async mode if the input handler for
this packet returns -EINPROGRESS in xfrm_input(). At this moment the device
reference in skb is held. Later xfrm_input() will be invoked again to
resume the processing.
If the transform state is still valid it would continue to release the
device reference and there won't be a problem; however if the transform
state is not valid when async resumption happens, the packet will be
dropped while the device reference is still being held.
When the device is deleted for some reason and the reference to this
device is not properly released, the kernel will keep logging like:
unregister_netdevice: waiting for ppp2 to become free. Usage count = 1
The issue is observed when running IPsec traffic over a PPPoE device based
on a bridge interface. By terminating the PPPoE connection on the server
end for multiple times, the PPPoE device on the client side will eventually
get stuck on the above warning message.
This patch will check the async mode first and continue to release device
reference in async resumption, before it is dropped due to invalid state.
v2: Do not assign address family from outer_mode in the transform if the
state is invalid
v3: Release device reference in the error path instead of jumping to resume
Fixes: 4ce3dbe397 ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)")
Signed-off-by: Xiaodong Xu <stid.smth@gmail.com>
Reported-by: Bo Chen <chenborfc@163.com>
Tested-by: Bo Chen <chenborfc@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We leak the page that we use to create skb page fragments
when destroying the xfrm_state. Fix this by dropping a
page reference if a page was assigned to the xfrm_state.
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Reported-by: JD <jdtxs00@gmail.com>
Reported-by: Paul Wouters <paul@nohats.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all "blkcipher" algorithms have been converted to "skcipher",
remove the blkcipher algorithm type.
The skcipher (symmetric key cipher) algorithm type was introduced a few
years ago to replace both blkcipher and ablkcipher (synchronous and
asynchronous block cipher). The advantages of skcipher include:
- A much less confusing name, since none of these algorithm types have
ever actually been for raw block ciphers, but rather for all
length-preserving encryption modes including block cipher modes of
operation, stream ciphers, and other length-preserving modes.
- It unified blkcipher and ablkcipher into a single algorithm type
which supports both synchronous and asynchronous implementations.
Note, blkcipher already operated only on scatterlists, so the fact
that skcipher does too isn't a regression in functionality.
- Better type safety by using struct skcipher_alg, struct
crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc.
- It sometimes simplifies the implementations of algorithms.
Also, the blkcipher API was no longer being tested.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit 174e23810c
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions. The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.
Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.
This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().
In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.
I am submitting this for "net", because we're still early in the release
cycle. The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The xfrm_if(s) on each netns can be deleted when its xfrmi dev is
deleted. xfrmi dev's removal can happen when:
a. netns is being removed and all xfrmi devs will be deleted.
b. rtnl_link_unregister(&xfrmi_link_ops) in xfrmi_fini() when
xfrm_interface.ko is being unloaded.
So there's no need to use xfrmi_exit_net() to clean any xfrm_if up.
v1->v2:
- Fix some changelog.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2019-09-05
1) Several xfrm interface fixes from Nicolas Dichtel:
- Avoid an interface ID corruption on changelink.
- Fix wrong intterface names in the logs.
- Fix a list corruption when changing network namespaces.
- Fix unregistation of the underying phydev.
2) Fix a potential warning when merging xfrm_plocy nodes.
From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In decode_session{4,6} there is a possibility that the skb dst dev is NULL,
e,g, with tunnel collect_md mode, which will cause kernel crash.
Here is what the code path looks like, for GRE:
- ip6gre_tunnel_xmit
- ip6gre_xmit_ipv6
- __gre6_xmit
- ip6_tnl_xmit
- if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE
- icmpv6_send
- icmpv6_route_lookup
- xfrm_decode_session_reverse
- decode_session4
- oif = skb_dst(skb)->dev->ifindex; <-- here
- decode_session6
- oif = skb_dst(skb)->dev->ifindex; <-- here
The reason is __metadata_dst_init() init dst->dev to NULL by default.
We could not fix it in __metadata_dst_init() as there is no dev supplied.
On the other hand, the skb_dst(skb)->dev is actually not needed as we
called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not
used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif;
So make a dst dev check here should be clean and safe.
v4: No changes.
v3: No changes.
v2: fix the issue in decode_session{4,6} instead of updating shared dst dev
in {ip_md, ip6}_tunnel_xmit.
Fixes: 8d79266bc4 ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported a splat:
xfrm_policy_inexact_list_reinsert+0x625/0x6e0 net/xfrm/xfrm_policy.c:877
CPU: 1 PID: 6756 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #57
Call Trace:
xfrm_policy_inexact_node_reinsert net/xfrm/xfrm_policy.c:922 [inline]
xfrm_policy_inexact_node_merge net/xfrm/xfrm_policy.c:958 [inline]
xfrm_policy_inexact_insert_node+0x537/0xb50 net/xfrm/xfrm_policy.c:1023
xfrm_policy_inexact_alloc_chain+0x62b/0xbd0 net/xfrm/xfrm_policy.c:1139
xfrm_policy_inexact_insert+0xe8/0x1540 net/xfrm/xfrm_policy.c:1182
xfrm_policy_insert+0xdf/0xce0 net/xfrm/xfrm_policy.c:1574
xfrm_add_policy+0x4cf/0x9b0 net/xfrm/xfrm_user.c:1670
xfrm_user_rcv_msg+0x46b/0x720 net/xfrm/xfrm_user.c:2676
netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2477
xfrm_netlink_rcv+0x74/0x90 net/xfrm/xfrm_user.c:2684
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x809/0x9a0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0xa70/0xd30 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg net/socket.c:657 [inline]
There is no reproducer, however, the warning can be reproduced
by adding rules with ever smaller prefixes.
The sanity check ("does the policy match the node") uses the prefix value
of the node before its updated to the smaller value.
To fix this, update the prefix earlier. The bug has no impact on tree
correctness, this is only to prevent a false warning.
Reported-by: syzbot+8cc27ace5f6972910b31@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the current implementation, phydev cannot be removed:
$ ip link add dummy type dummy
$ ip link add xfrm1 type xfrm dev dummy if_id 1
$ ip l d dummy
kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1
Manage it like in ip tunnels, ie just keep the ifindex. Not that the side
effect, is that the phydev is now optional.
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
dev_net(dev) is the netns of the device and xi->net is the link netns,
where the device has been linked.
changelink() must operate in the link netns to avoid a corruption of
the xfrm lists.
Note that xi->net and dev_net(xi->physdev) are always the same.
Before the patch, the xfrmi lists may be corrupted and can later trigger a
kernel panic.
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The ifname is copied when the interface is created, but is never updated
later. In fact, this property is used only in one error message, where the
netdevice pointer is available, thus let's use it.
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The new parameters must not be stored in the netdev_priv() before
validation, it may corrupt the interface. Note also that if data is NULL,
only a memset() is done.
$ ip link add xfrm1 type xfrm dev lo if_id 1
$ ip link add xfrm2 type xfrm dev lo if_id 2
$ ip link set xfrm1 type xfrm dev lo if_id 2
RTNETLINK answers: File exists
$ ip -d link list dev xfrm1
5: xfrm1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0x2 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
=> "if_id 0x2"
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-07-05
1) A lot of work to remove indirections from the xfrm code.
From Florian Westphal.
2) Fix a WARN_ON with ipv6 that triggered because of a
forgotten break statement. From Florian Westphal.
3) Remove xfrmi_init_net, it is not needed.
From Li RongQing.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2019-07-05
1) Fix xfrm selector prefix length validation for
inter address family tunneling.
From Anirudh Gupta.
2) Fix a memleak in pfkey.
From Jeremy Sowden.
3) Fix SA selector validation to allow empty selectors again.
From Nicolas Dichtel.
4) Select crypto ciphers for xfrm_algo, this fixes some
randconfig builds. From Arnd Bergmann.
5) Remove a duplicated assignment in xfrm_bydst_resize.
From Cong Wang.
6) Fix a hlist corruption on hash rebuild.
From Florian Westphal.
7) Fix a memory leak when creating xfrm interfaces.
From Nicolas Dichtel.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported following spat:
BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221
BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455
BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066
Workqueue: events xfrm_hash_rebuild
Call Trace:
__write_once_size include/linux/compiler.h:221 [inline]
hlist_del_rcu include/linux/rculist.h:455 [inline]
xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
process_one_work+0x814/0x1130 kernel/workqueue.c:2269
Allocated by task 8064:
__kmalloc+0x23c/0x310 mm/slab.c:3669
kzalloc include/linux/slab.h:742 [inline]
xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21
xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline]
xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120
ops_init+0x336/0x420 net/core/net_namespace.c:130
setup_net+0x212/0x690 net/core/net_namespace.c:316
The faulting address is the address of the old chain head,
free'd by xfrm_hash_resize().
In xfrm_hash_rehash(), chain heads get re-initialized without
any hlist_del_rcu:
for (i = hmask; i >= 0; i--)
INIT_HLIST_HEAD(odst + i);
Then, hlist_del_rcu() gets called on the about to-be-reinserted policy
when iterating the per-net list of policies.
hlist_del_rcu() will then make chain->first be nonzero again:
static inline void __hlist_del(struct hlist_node *n)
{
struct hlist_node *next = n->next; // address of next element in list
struct hlist_node **pprev = n->pprev;// location of previous elem, this
// can point at chain->first
WRITE_ONCE(*pprev, next); // chain->first points to next elem
if (next)
next->pprev = pprev;
Then, when we walk chainlist to find insertion point, we may find a
non-empty list even though we're supposedly reinserting the first
policy to an empty chain.
To fix this first unlink all exact and inexact policies instead of
zeroing the list heads.
Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh,
without fix KASAN catches the corruption as it happens, SLUB poisoning
detects it a bit later.
Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com
Fixes: 1548bc4e05 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference
is a single sizeof() (ipv4 vs. ipv6 header).
Merge both into xfrm_state_mtu() and remove the indirection.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
kernelci.org reports failed builds on arc because of what looks
like an old missed 'select' statement:
net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs':
xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash'
I don't see this in randconfig builds on other architectures, but
it's fairly clear we want to select the hash code for it, like we
do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER
is also required even though it has not popped up in build tests.
Fixes: 17bc197022 ("ipsec: Use skcipher and ahash when probing algorithms")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After commit b38ff4075a, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4
In fact, the selector is not mandatory, allow the user to provide an empty
selector.
Fixes: b38ff4075a ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pointer members of an object with static storage duration, if not
explicitly initialized, will be initialized to a NULL pointer. The
net namespace API checks if this pointer is not NULL before using it,
it are safe to remove the function.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
net/xfrm/xfrm_input.c:378:17: warning: this statement may fall through [-Wimplicit-fallthrough=]
skb->protocol = htons(ETH_P_IPV6);
... the fallthrough then causes a bogus WARN_ON().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 4c203b0454 ("xfrm: remove eth_proto value from xfrm_state_afinfo")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Only a handful of xfrm_types exist, no need to have 512 pointers for them.
Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms.
Also, the unregister function doesn't need to return an error, no single
caller does anything useful with it.
Just place a WARN_ON() where needed instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_prepare_input needs to lookup the state afinfo backend again to fetch
the address family ethernet protocol value.
There are only two address families, so a switch statement is simpler.
While at it, use u8 for family and proto and remove the owner member --
its not used anywhere.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
No module dependency, placing this in xfrm_state.c avoids need for
an indirection.
This also removes the state spinlock -- I don't see why we would need
to hold it during sorting.
This in turn allows to remove the 'net' argument passed to
xfrm_tmpl_sort. Last, remove the EXPORT_SYMBOL, there are no modular
callers.
For the CONFIG_IPV6=m case, vmlinux size increase is about 300 byte.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 111 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is only one implementation of this function; just call it directly.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
same as previous patch: just place this in the caller, no need to
have an indirection for a structure initialization.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Simple initialization, handle it in the caller.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Family of src/dst can be different from family of selector src/dst.
Use xfrm selector family to validate address prefix length,
while verifying new sa from userspace.
Validated patch with this command:
ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \
reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \
0x1111016400000000000000000000000044440001 128 \
sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5
Fixes: 07bf790895 ("xfrm: Validate address prefix lengths in the xfrm selector.")
Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resurrects commit 8742dc86d0
("xfrm4: Fix uninitialized memory read in _decode_session4"),
which got lost during a merge conflict resolution between ipsec-next
and net-next tree.
c53ac41e37 ("xfrm: remove decode_session indirection from afinfo_policy")
in ipsec-next moved the (buggy) _decode_session4 from
net/ipv4/xfrm4_policy.c to net/xfrm/xfrm_policy.c.
In mean time, 8742dc86d0 was applied to ipsec.git and fixed the
problem in the "old" location.
When the trees got merged, the moved, old function was kept.
This applies the "lost" commit again, to the new location.
Fixes: a658a3f2ec ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
Pull timer updates from Ingo Molnar:
"This cycle had the following changes:
- Timer tracing improvements (Anna-Maria Gleixner)
- Continued tasklet reduction work: remove the hrtimer_tasklet
(Thomas Gleixner)
- Fix CPU hotplug remove race in the tick-broadcast mask handling
code (Thomas Gleixner)
- Force upper bound for setting CLOCK_REALTIME, to fix ABI
inconsistencies with handling values that are close to the maximum
supported and the vagueness of when uptime related wraparound might
occur. Make the consistent maximum the year 2232 across all
relevant ABIs and APIs. (Thomas Gleixner)
- various cleanups and smaller fixes"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Fix typos in comments
tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline()
timekeeping: Force upper bound for setting CLOCK_REALTIME
timer/trace: Improve timer tracing
timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps
timer: Move trace point to get proper index
tick/sched: Update tick_sched struct documentation
tick: Remove outgoing CPU from broadcast masks
timekeeping: Consistently use unsigned int for seqcount snapshot
softirq: Remove tasklet_hrtimer
xfrm: Replace hrtimer tasklet with softirq hrtimer
mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
