This reverts commit afcbe252e9.
The commit in question caused my sc7280-herobrine-herobrine-r1 board
not to boot anymore. This shouldn't be too surprising since the driver
is relying on the name "cqhci".
The issue seems to be that someone decided to change the names of
things when the binding moved from .txt to .yaml. We should go back to
the names that the bindings have historically specified.
For some history, see commit d3392339ca ("mmc: cqhci: Update cqhci
memory ioresource name") and commit d79100c91a ("dt-bindings: mmc:
sdhci-msm: Add CQE reg map").
Fixes: afcbe252e9 ("arm64: dts: qcom: Fix 'reg-names' for sdhci nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706144706.1.I48f35820bf3670d54940110462555c2d0a6d5eb2@changeid
Although the violation digest in the IMA measurement list is always
zeroes, the size of the digest should be based on the hash algorithm.
Until recently the hash algorithm was hard coded to sha1. Fix the
violation digest size included in the IMA measurement list.
This is just a cosmetic change which should not affect attestation.
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 09091c44cb ("ima: use IMA default hash algorithm for integrity violations")
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/qcom/ipq8072-ax9000.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Moved node after "soc" for alphabetical ordering]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704113318.623102-1-robimarko@gmail.com
Switch from the flat PC idle states of sdm845 to OSI hierarchical idle
states. The exceptions are the cheza plaftorms, which need to remain with
PC idle states. So in order allow all the other platforms to switch,
while cheza platforms to remain the same, replace the PC idle states with
the OSI ones in the main SDM845 dtsi, and then override the inherited OSI
states with PC ones, delete inherited psci cpus nodes, domain idle states
and power domain properties.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220630101403.1888541-1-abel.vesa@linaro.org
Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.
Currently supported features:
- Display via simplefb (panel driver is WIP)
- Keys
- Micro SD card
- Modem (not tested much, but initialises)
- UFS (crashes during intensive workloads, may need quirks)
- USB in peripheral mode
Notable missing features:
- Enabling WiFi causes a remoteproc crash, so it's disabled here.
Needs to be debugged - ideas welcome!
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Tested-by: Gregari Ivanov <llamashere@posteo.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-2-newbie13xd@gmail.com
The commit 82d61e19fc ("arm64: dts: qcom: msm8996: Move '#clock-cells'
to QMP PHY child node") moved the '#clock-cells' properties to the child
nodes. However it missed the fact that the property must have been set
to <0> (as all pipe clocks use of_clk_hw_simple_get as the xlate
function. Also the mentioned commit didn't add '#clock-cells' properties
to second and third PCIe PHY nodes. Correct both these mistakes:
- Set '#clock-cells' to <0>,
- Add the property to pciephy_1 and pciephy_2 nodes.
Fixes: 82d61e19fc ("arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child node")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220620071936.1558906-3-dmitry.baryshkov@linaro.org
Was dropped when we converted to the generic helpers.
Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.
The existing pruss platform driver has been updated to support this
through a new AM62x specific compatible.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220602120613.2175-4-kishon@ti.com
TX doorbells may be postponed, because sometimes the driver knows that
another packet follows (for example, when xmit_more is true, or when a
MPWQE session is closed before transmitting a packet).
However, the DMA mapping may fail for the next packet, in which case a
new WQE is not posted, the doorbell isn't updated either, and the
transmission of the previous packet will be delayed indefinitely.
This commit fixes the described rare error flow by posting a NOP and
ringing the doorbell on errors to flush all the previous packets. The
MPWQE session is closed before that. DMA mapping in the MPWQE flow is
moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions
are not allowed. Stop room always has enough space for a NOP, because
the actual TX WQE is not posted.
Fixes: e586b3b0ba ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The existing capability check for vnic env counters only checks for
receive steering discards, although we need the counters update for the
exposed internal queue oob counter as well. This could result in the
latter counter not being updated correctly when the receive steering
discards counter is not supported.
Fix that by checking whether any counter is supported instead of only
the steering counter capability.
Fixes: 0cfafd4b4d ("net/mlx5e: Add device out of buffer counter")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Allocate a ct priv workqueue instead of using mlx5e priv one
so flushing will only be of related CT entries.
Also move flushing of the workqueue before rhashtable destroy
otherwise entries won't be valid.
Fixes: b069e14fff ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mode & mode_flags is updated at the end of mlx5_activate_lag which
may not reflect the actual mode as shown in below logic:
mlx5_activate_lag(struct mlx5_lag *ldev,
|-- unsigned long flags = 0;
|-- err = mlx5_lag_set_flags(ldev, mode, tracker, shared_fdb, &flags);
|-- err = mlx5_create_lag(ldev, tracker, mode, flags);
|-- mlx5_get_str_port_sel_mode(ldev);
|-- ldev->mode = mode;
|-- ldev->mode_flags = flags;
Use mode & flag as parameters to get port select mode info.
Fixes: 94db331778 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is a total of four 4M entries flow tables. In sriov disabled
mode, ct, ct_nat and post_act take three of them. When adding the
first tc nic rule in this mode, it will take another 4M table
for the tc <chain,prio> table. If user then enables sriov, the legacy
flow table tries to take another 4M and fails, and so enablement fails.
To fix that, have legacy fdb take the next available maximum
size from the fs ft pool.
Fixes: 4a98544d18 ("net/mlx5: Move chains ft pool to be used by all firmware steering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison
against the size of the private RX TLS driver context.
Fixes: 1182f36593 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison
against the size of the private TX TLS driver context.
Fixes: df8d866770 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Multiport eswitch is required to use native FDB selection instead of
affinity, This was achieved by passing the shared_fdb flag down
the HW lag creation path. While it did accomplish the goal of setting
FDB selection mode to native, it had the side effect of also
creating a shared FDB configuration.
This created a few issues:
- TC rules are inserted into a non active FDB, which means traffic isn't
offloaded as all traffic will reach only a single FDB.
- All wire traffic is treated as if a single physical port received it; while
this is true for a bond configuration, this shouldn't be the case for
multiport eswitch.
Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE
to indicate what FDB selection mode should be used.
Fixes: 94db331778 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Redirecting traffic from uplink to a VF is a legal operation of
mulitport eswitch mode. Remove the limitation.
Fixes: 94db331778 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After emulating a misaligned load or store issued in Thumb mode, we have
to advance the IT state by hand, or it will get out of sync with the
actual instruction stream, which means we'll end up applying the wrong
condition code to subsequent instructions. This might corrupt the
program state rather catastrophically.
So borrow the it_advance() helper from the probing code, and use it on
CPSR if the emulated instruction is Thumb.
Cc: <stable@vger.kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Print the message about disabled Spectre workarounds only once. The
message is printed each time CPU goes out from idling state on NVIDIA
Tegra boards, causing storm in KMSG that makes system unusable.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
After the removal of set_fs() the reference to set_fs() is stale.
Alter the helptext to reflect what the config option really does.
Fixes: 8ac6f5d7f8 ("ARM: 9113/1: uaccess: remove set_fs() implementation")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
This function/macro isn't used anywhere in the kernel.
The only user was set_fs() and was deleted in the set_fs()
removal patch set.
Fixes: 8ac6f5d7f8 ("ARM: 9113/1: uaccess: remove set_fs() implementation")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
commit 7a1be318f5 ("ARM: 9012/1: move device tree mapping out of linear
region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area
which contains fdt. But it only reserves the exact physical memory that
fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or
speculative read access can bring the RAM content from non-fdt zone into
cache, PIPT makes it to be hit by subsequently read access through
shareable mapping(such as linear mapping), and the cache consistency
between cores is lost due to non-shareable property.
|<---------FDT_FIXED_SIZE------>|
| |
-------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
-------------------------------
1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded
into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA
received the notification to invalid the corresponding cachelines, but
the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data
is read.
To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to
MT_ROM, it is shareable and non-executable.
Here's an example:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc
kernel BUG at lib/list_debug.c:53!
... ...
PC is at __list_del_entry_valid+0x58/0x98
LR is at __list_del_entry_valid+0x58/0x98
psr: 60000093
sp : c0ecbf30 ip : 00000000 fp : 00000001
r10: c08410d0 r9 : 00000001 r8 : c0825e0c
r7 : 20000013 r6 : c08410d0 r5 : c0ecbf74 r4 : c0ecbf74
r3 : c0825d08 r2 : 00000000 r1 : df7ce6f4 r0 : 00000044
... ...
Stack: (0xc0ecbf30 to 0xc0ecc000)
bf20: c0ecbf74 c0164fd0 c0ecbf70 c0165170
bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
... ... < next prev >
(__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
(__list_del_entry) from (finish_swait+0x60/0x7c)
(finish_swait) from (rcu_gp_kthread+0x560/0xa20)
(rcu_gp_kthread) from (kthread+0x14c/0x15c)
(kthread) from (ret_from_fork+0x14/0x24)
The faulty list node to be deleted is a local variable, its address is
c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value
before lib/list_debug.c:53 is c08410dc. A large amount of printing results
in swapping out the cacheline containing the old data(MT_ROM mapping is
read only, so the cacheline cannot be dirty), and the subsequent dump
operation obtains new data from the DDR.
Fixes: 7a1be318f5 ("ARM: 9012/1: move device tree mapping out of linear region")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Jon reports that the Spectre-BHB init code is filling up the kernel log
with spurious notifications about which mitigation has been enabled,
every time any CPU comes out of a low power state.
Given that Spectre-BHB mitigations are system wide, only a single
mitigation can be enabled, and we already print an error if two types of
CPUs coexist in a single system that require different Spectre-BHB
mitigations.
This means that the pr_info() that describes the selected mitigation
does not need to be emitted for each CPU anyway, and so we can simply
emit it only once.
In order to clarify the above in the log message, update it to describe
that the selected mitigation will be enabled on all CPUs, including ones
that are unaffected. If another CPU comes up later that is affected and
requires a different mitigation, we report an error as before.
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Bandwidth monitoring (BWMON) sits between various subsytems like CPU,
GPU, Last Level caches and memory subsystem. The BWMON can be
configured to monitor the data throuhput between memory and other
subsytems. The throughput is measured within specified sampling window
and is used to vote for corresponding interconnect bandwidth.
Current implementation brings support for BWMON v4, used for example on
SDM845 to measure bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc). Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.
The driver was tested on SDM845.
Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-3-krzysztof.kozlowski@linaro.org
Cleanup of ARM64 DTS for v5.20, part two
Remaining cleanups for ARM64 DTS: gpio-keys and led node names on Marvel
platforms.
* tag 'dt64-cleanup-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: marvell: armada-3720: align lednode names with dtschema
arm64: dts: marvell: align gpio-key node names with dtschema
Link: https://lore.kernel.org/r/20220706163754.33064-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
