While running the following fstest with logged xattrs DISabled, I
noticed the following:
# FSSTRESS_AVOID="-z -f unlink=1 -f rmdir=1 -f creat=2 -f mkdir=2 -f
getfattr=3 -f listfattr=3 -f attr_remove=4 -f removefattr=4 -f
setfattr=20 -f attr_set=60" ./check generic/475
INFO: task u9:1:40 blocked for more than 61 seconds.
Tainted: G O 5.19.0-rc2-djwx #rc2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:u9:1 state:D stack:12872 pid: 40 ppid: 2 flags:0x00004000
Workqueue: xfs-cil/dm-0 xlog_cil_push_work [xfs]
Call Trace:
<TASK>
__schedule+0x2db/0x1110
schedule+0x58/0xc0
schedule_timeout+0x115/0x160
__down_common+0x126/0x210
down+0x54/0x70
xfs_buf_lock+0x2d/0xe0 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xfs_buf_item_unpin+0x227/0x3a0 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xfs_trans_committed_bulk+0x18e/0x320 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xlog_cil_committed+0x2ea/0x360 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
xlog_cil_push_work+0x60f/0x690 [xfs 0532c1cb1d67dd81d15cb79ac6e415c8dec58f73]
process_one_work+0x1df/0x3c0
worker_thread+0x53/0x3b0
kthread+0xea/0x110
ret_from_fork+0x1f/0x30
</TASK>
This appears to be the result of shortform_to_leaf creating a new leaf
buffer as part of adding an xattr to a file. The new leaf buffer is
held and attached to the xfs_attr_intent structure, but then the
filesystem shuts down. Instead of the usual path (which adds the attr
to the held leaf buffer which releases the hold), we instead cancel the
entire deferred operation.
Unfortunately, xfs_attr_cancel_item doesn't release any attached leaf
buffers, so we leak the locked buffer. The CIL cannot do anything
about that, and hangs. Fix this by teaching it to release leaf buffers,
and make XFS a little more careful about not leaving a dangling
reference.
The prologue of xfs_attri_item_recover is (in this author's opinion) a
little hard to figure out, so I'll clean that up in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We should use invalidate_lock and XFS_MMAPLOCK_SHARED to check the state
of mmap_lock rw_semaphore in xfs_isilocked(), rather than i_rwsem and
XFS_IOLOCK_SHARED.
Fixes: 2433480a7e ("xfs: Convert to use invalidate_lock")
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There are similar lock flags assert in xfs_ilock(), xfs_ilock_nowait(),
xfs_iunlock(), thus we can factor it out into a helper that is clear.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.
This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.
The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.
Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.
Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Port the is_quota_modification() and dqout_transfer() helper to type
safe vfs{g,u}id_t. Since these helpers are only called by a few
filesystems don't introduce a new helper but simply extend the existing
helpers to pass down the mount's idmapping.
Note, that this is a non-functional change, i.e. nothing will have
happened here or at the end of this series to how quota are done! This
a change necessary because we will at the end of this series make
ownership changes easier to reason about by keeping the original value
in struct iattr for both non-idmapped and idmapped mounts.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
Since struct iattr uses an anonymous union with overlapping types as
supported by the C standard, filesystems that haven't converted to
ia_vfs{g,u}id won't see any difference and things will continue to work
as before. In other words, no functional changes intended with this
change.
Link: https://lore.kernel.org/r/20220621141454.2914719-7-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Pull exfat fix from Namjae Jeon:
- Use updated exfat_chain directly instead of snapshot values in
rename.
* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use updated exfat_chain directly during renaming
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
Pull f2fs fixes from Jaegeuk Kim:
"Some urgent fixes to avoid generating corrupted inodes caused by
compressed and inline_data files.
In addition, avoid a wrong error report which prevents a roll-forward
recovery"
* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: do not count ENOENT for error case
f2fs: fix iostat related lock protection
f2fs: attach inline_data after setting compression
cifs_ses::ip_addr wasn't being updated in cifs_session_setup() when
reconnecting SMB sessions thus returning wrong value in
/proc/fs/cifs/DebugData.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 5.19 release. All are fixing
issues that either happened in this release, or going to stable.
In detail:
- A small series of fixlets for the poll handling, all destined for
stable (Pavel)
- Fix a merge error from myself that caused a potential -EINVAL for
the recv/recvmsg flag setting (me)
- Fix a kbuf recycling issue for partial IO (me)
- Use the original request for the inflight tracking (me)
- Fix an issue introduced this merge window with trace points using a
custom decoder function, which won't work for perf (Dylan)"
* tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
io_uring: use original request task for inflight tracking
io_uring: move io_uring_get_opcode out of TP_printk
io_uring: fix double poll leak on repolling
io_uring: fix wrong arm_poll error handling
io_uring: fail links when poll fails
io_uring: fix req->apoll_events
io_uring: fix merge error in checking send/recv addr2 flags
io_uring: mark reissue requests with REQ_F_PARTIAL_IO
Remove the unused timeout parameter from dlm_user_adopt_orphan().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes warning messages that could be logged when
remote requests had been waiting on a reply message for some timeout
period (which could be set through configfs, but was rarely enabled.)
The improved midcomms layer now carefully tracks all messages and
replies, and logs much more useful messages if there is an actual
problem.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes some grammar output in lowcomms implementation by
removing the "successful" word which should be "successfully" but it
can never be unsuccessfully so we remove it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds comments about the difference between the lower 2 bytes
of lkb flags and the 2 upper bytes of the lkb IFL flags. In short the
upper 2 bytes will be handled as internal flags whereas the lower 2
bytes are part of the DLM protocol and are used to exchange messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleans up the handling of recovery results by moving it from
ls_recover() to the caller do_ls_recovery(). This makes the error handling
clearer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make dlm_new_lockspace() wait until a full recovery completes
sucessfully or fails. Previously, dlm_new_lockspace() returned
to the caller after dlm_recover_members() finished, which is
only partially through recovery. The result of the previous
behavior is that the new lockspace would not be usable for some
time (especially with overlapping recoveries), and some errors
in the later part of recovery could not be returned to the caller.
Kernel callers gfs2 and cluster-md have their own wait handling to
wait for recovery to complete after calling dlm_new_lockspace().
This continues to work, but will be unnecessary.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A lockspace can be "stopped" multiple times consecutively before
being "started" (when recoveries overlap.) In this case, the
lsop_recover_prep callback only needs to be called once when the
lockspace is first stopped, and not repeatedly for each stop.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make clear that a particular recovery iteration must not be aborted
before membership changes are applied to the members list (ls_nodes)
and midcomms layer. Interrupting recovery before this can result
in missing node-specific changes in midcomms or through lsops.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds the resource name to dlm tracepoints. The name
usually comes through the lkb_resource, but in some cases a resource
may not yet be associated with an lkb, in which case the name and
namelen parameters are used.
It should be okay to access the lkb_resource and the res_name field at
the time when the tracepoint is invoked. The resource is assigned to a
lkb and it's reference is being held during the tracepoint call. During
this time the resource cannot be freed. Also a lkb will never switch
its assigned resource. The name of a dlm_rsb is assigned at creation
time and should never be changed during runtime as well.
The TP_printk() call uses always a hexadecimal string array
representation for the resource name (which is not necessarily ascii.)
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a dereference of lksb of lkb when calling ast
tracepoint. First it reduces additional overhead, even if traces
are not active. Second we can deference it in TP_fast_assign from
the existing lkb parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch moves the trace calls for ast and bast to before the
ast and bast callback functions are called rather than after.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the handling of a plock operation that was interrupted
while waiting for a user space reply from dlm_controld. (This is not
the lock blocking state, i.e. locks_lock_file_wait().)
Currently, when an op is interrupted while waiting on user space, the
op is removed. When the user space result later arrives, a kernel
message is loggged: "dev_write no op...". This can be seen from a test
such as "stress-ng --fcntl 100" and interrupting it with ctrl-c.
Now, leave the op in place when interrupted and remove it when the
result arrives (the result will be ignored.) With this change, the
logged message is not expected to appear, and would indicate a bug.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch refactors do_unlock_close() by using only struct dlm_plock_info
as a parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch reverses the commit bcfad4265c ("dlm: improve plock logging
if interrupted") by moving it to debug level and notifying the user an op
was removed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We use cifs_tcp_ses_lock to protect a lot of things.
Not only does it protect the lists of connections, sessions,
tree connects, open file lists, etc., we also use it to
protect some fields in each of it's entries.
In this case, cifs_mark_ses_for_reconnect takes the
cifs_tcp_ses_lock to traverse the lists, and then calls
cifs_update_iface. However, that can end up calling
cifs_put_tcp_session, which picks up the same lock again.
Avoid this by taking a ref for the session, drop the lock,
and then call update iface.
Also, in cifs_update_iface, avoid nested locking of iface_lock
and chan_lock, as much as possible. When unavoidable, we need
to pick iface_lock first.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
generic/091, 263 test failed since commit f66f8b94e7 ("cifs: when
extending a file with falloc we should make files not-sparse").
FSCTL_ZERO_DATA sets the range of bytes to zero without extending file
size. The VFS_FALLOCATE_FL_KEEP_SIZE flag should be used even on
non-sparse files.
Cc: stable@vger.kernel.org
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The current blocking mechanism for pushing the inodegc queue out to
disk can result in systems becoming unusable when there is a long
running inodegc operation. This is because the statfs()
implementation currently issues a blocking flush of the inodegc
queue and a significant number of common system utilities will call
statfs() to discover something about the underlying filesystem.
This can result in userspace operations getting stuck on inodegc
progress, and when trying to remove a heavily reflinked file on slow
storage with a full journal, this can result in delays measuring in
hours.
Avoid this problem by adding "push" function that expedites the
flushing of the inodegc queue, but doesn't wait for it to complete.
Convert xfs_fs_statfs() and xfs_qm_scall_getquota() to use this
mechanism so they don't block but still ensure that queued
operations are expedited.
Fixes: ab23a77687 ("xfs: per-cpu deferred inode inactivation queues")
Reported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: fix _getquota_next to use _inodegc_push too]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently inodegc work can sit queued on the per-cpu queue until
the workqueue is either flushed of the queue reaches a depth that
triggers work queuing (and later throttling). This means that we
could queue work that waits for a long time for some other event to
trigger flushing.
Hence instead of just queueing work at a specific depth, use a
delayed work that queues the work at a bound time. We can still
schedule the work immediately at a given depth, but we no long need
to worry about leaving a number of items on the list that won't get
processed until external events prevail.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This patch adds the pid information which requested the lock operation
to the debug log output.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will use the list helper list_first_entry() instead of using
list_entry() to get the first element of a list.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Pull tracing fixes from Steven Rostedt:
- Check for NULL in kretprobe_dispatcher()
NULL can now be passed in, make sure it can handle it
- Clean up unneeded #endif #ifdef of the same preprocessor
check in the middle of the block.
- Comment clean up
- Remove unneeded initialization of the "ret" variable in
__trace_uprobe_create()
* tag 'trace-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Remove unwanted initialization in __trace_uprobe_create()
tracefs: Fix syntax errors in comments
tracing: Simplify conditional compilation code in tracing_set_tracer()
tracing/kprobes: Check whether get_kretprobe() returns NULL in kretprobe_dispatcher()
In prior kernels, we did file assignment always at prep time. This meant
that req->task == current. But after deferring that assignment and then
pushing the inflight tracking back in, we've got the inflight tracking
using current when it should in fact now be using req->task.
Fixup that error introduced by adding the inflight tracking back after
file assignments got modifed.
Fixes: 9cae36a094 ("io_uring: reinstate the inflight tracking")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we only query the server for network interfaces
information at the time of mount, and never afterwards.
This can be a problem, especially for services like Azure,
where the IP address of the channel endpoints can change
over time.
With this change, we schedule a 600s polling of this info
from the server for each tree connect.
An alternative for periodic polling was to do this only at
the time of reconnect. But this could delay the reconnect
time slightly. Also, there are some challenges w.r.t how
we have cifs_reconnect implemented today.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Going forward, the plan is to periodically query the server
for it's interfaces (when multichannel is enabled).
This change allows checking for inactive interfaces during
reconnect, and reconnect to a new interface if necessary.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A server's published interface list can change over time, and needs
to be updated. We've storing iface_list as a simple array, which
makes it difficult to manipulate an existing list.
With this change, iface_list is modified into a linked list of
interfaces, which is kept sorted by speed.
Also added a reference counter for an iface entry, so that each
channel can maintain a backpointer to the iface and drop it
easily when needed.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers do not allow null netname contexts, which would cause
multichannel to revert to single channel when mounting to some
servers (e.g. Azure xSMB). The previous patch fixed that by avoiding
incorrectly sending the netname context when there would be a null
hostname sent in the netname context, while this patch fixes the null
hostname for the secondary channel by using the hostname of the
primary channel for the secondary channel.
Fixes: 4c14d7043f ("cifs: populate empty hostnames for extra channels")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull 9pfs fixes from Dominique Martinet:
"A couple of fid refcount and fscache fixes:
- fid refcounting was incorrect in some corner cases and would leak
resources, only freed at umount time. The first three commits fix
three such cases
- 'cache=loose' or fscache was broken when trying to write a partial
page to a file with no read permission since the rework a few
releases ago.
The fix taken here is just to restore old behavior of using the
special 'writeback_fid' for such reads, which is open as root/RDWR
and such not get complains that we try to read on a WRONLY fid.
Long-term it'd be nice to get rid of this and not issue the read at
all (skip cache?) in such cases, but that direction hasn't
progressed"
* tag '9p-for-5.19-rc4' of https://github.com/martinetd/linux:
9p: fix EBADF errors in cached mode
9p: Fix refcounting during full path walks for fid lookups
9p: fix fid refcount leak in v9fs_vfs_get_link
9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
Pull btrfs fixes from David Sterba:
- print more error messages for invalid mount option values
- prevent remount with v1 space cache for subpage filesystem
- fix hang during unmount when block group reclaim task is running
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add error messages to all unrecognized mount options
btrfs: prevent remounting to v1 space cache for subpage mount
btrfs: fix hang during unmount when block group reclaim task is running
The recent patch to make afs_getattr consult the server didn't account
for the pseudo-inodes employed by the dynamic root-type afs superblock
not having a volume or a server to access, and thus an oops occurs if
such a directory is stat'd.
Fix this by checking to see if the vnode->volume pointer actually points
anywhere before following it in afs_getattr().
This can be tested by stat'ing a directory in /afs. It may be
sufficient just to do "ls /afs" and the oops looks something like:
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:afs_getattr+0x8b/0x14b
...
Call Trace:
<TASK>
vfs_statx+0x79/0xf5
vfs_fstatat+0x49/0x62
Fixes: 2aeb8c86d4 ("afs: Fix afs_getattr() to refetch file status if callback break occurred")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
