Pull chrome platform updates from Benson Leung:
"Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes was
merged through GregKH's USB tree in order to satisfy cros_ec_typec
driver and typec connector class subsystem dependencies of subsequent
changes.
Summary:
cros_ec_typec:
- Registration of cable plug information
- Support for SOP' plug registration and altmodes
- Support for reporting number of altmodes supported by partners and
plugs
- Send mux configuration ack to EC via a new host command
- Support mux control with no port partner present
- Decouple cable removal from partner removal
cros_ec misc:
- Fix some event masking in cros_ec_proto.
- Gwendal reworked cros_ec's top and bottom half for consistency in
ishtp and rpmsg
- Constify static attribute_group structs"
* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Flush pending work
platform/chrome: cros_ec_types: Support disconnect events without partners
platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
platform/chrome: cros_ec_typec: Decouple partner removal
platform/chrome: cros_ec: Call interrupt bottom half at probe time
platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
platform/chrome: Constify static attribute_group structs
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
Currently, we return if there is no partner present when
!PD_CTRL_RESP_ENABLED_CONNECTED, without proceeding further. This ties
partner removal to cable removal, whereas the two should be independent.
Update the check to remove a partner if one was registered, but continue
after that instead of returning.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20210202224001.3810274-1-pmalani@chromium.org
Signed-off-by: Benson Leung <bleung@chromium.org>
In some corner cases downgrade of the superspeed typec device(e.g. Dell
typec Dock, apple dongle) was seen because before the SOC mux configuration
finishes, EC starts configuring the next mux state.
With this change, once the SOC mux is configured, kernel will send an
acknowledgment to EC via Host command EC_CMD_USB_PD_MUX_ACK [1].
After sending the host event EC will wait for the acknowledgment from
kernel before starting the PD negotiation for the next mux state. This
helps to have a framework to build better error handling along with the
synchronization of timing sensitive mux states.
This change also brings in corresponding EC header updates from the EC code
base [1].
[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-3-utkarsh.h.patel@intel.com
Modify the altmode registration (and unregistration) code so that it
can be used by both partners and plugs.
Then, add code to register plug altmodes using the newly parameterized
function. Also set the number of alternate modes for the plug using the
associated Type C connector class function
typec_plug_set_num_altmodes().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-12-pmalani@chromium.org
Pull spi updates from Mark Brown:
"The big change this release has been some excellent work from Lukas
Wunner which closes a bunch of holes in the cleanup paths for drivers,
mainly introduced as a result of devm conversions causing bad
interactions with the support SPI has for allocating the bus and
driver data together.
Together with some of the other work done it feels like we've turned
the corner on several long standing pain points with the API.
Summary:
- Many cleanups around probe/remove and error handling from Lukas
Wunner and Uwe Kleine-König, and further fixes around PM from Zhang
Qilong.
- Provide a mask for which bits of the mode can safely be configured
by drivers and use that to fix an issue with the ADS7846 driver.
- Documentation of the expected interactions between SPI and GPIO
level chip select polarity configuration from H. Nikolaus Schaller,
hopefully we're pretty much at the end of sorting out the
interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus
Walleij for this.
- DMA support for Allwinner sun6i controllers.
- Support for Canaan K210 Designware implementations and Intel Adler
Lake"
* tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
spi: Limit the spi device max speed to controller's max speed
spi: spi-geni-qcom: Use the new method of gpio CS control
platform/chrome: cros_ec_spi: Drop bits_per_word assignment
platform/chrome: cros_ec_spi: Don't overwrite spi::mode
spi: dw: Add support for the Canaan K210 SoC SPI
spi: dw: Add support for 32-bits max xfer size
dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller
spi: Update DT binding docs to support SiFive FU740 SoC
spi: atmel-quadspi: Fix use-after-free on unbind
spi: npcm-fiu: Disable clock in probe error path
spi: ar934x: Don't leak SPI master in probe error path
spi: mt7621: Don't leak SPI master in probe error path
spi: mt7621: Disable clock in probe error path
media: netup_unidvb: Don't leak SPI master in probe error path
spi: sc18is602: Don't leak SPI master in probe error path
spi: rb4xx: Don't leak SPI master in probe error path
spi: gpio: Don't leak SPI master in probe error path
spi: spi-mtk-nor: Don't leak SPI master in probe error path
spi: mxic: Don't leak SPI master in probe error path
...
On occasion, the Chrome Embedded Controller (EC) can send a mux
configuration which doesn't map to a particular data mode. For instance,
dedicated Type C chargers, when connected, may cause only
USB_PD_MUX_POLARITY_INVERTED to be set. This is a valid flag combination
and should not lead to a driver abort.
Modify the mux configuration handling to not return an error when an
unrecognized mux flag combination is encountered. Concordantly, make the
ensuing print a debug level print so as to not pollute the kernel logs.
Cc: Keith Short <keithshort@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201106020305.767202-1-pmalani@chromium.org
There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.
Fixes: a17d94f0b6 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make a call to the newly introduced EC_CMD_TYPEC_STATUS command.
Currently we just check to see if the SOP (port-partner) discovery was
done and emit a debug level print for it.
Subsequent patches will retrieve and parse the discovery data and fill
out the Type C connector class data structures.
Also check the EC_FEATURE_TYPEC_CMD feature flag at probe, and only call
the new TYPEC_STATUS command if the feature flag is supported.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-6-pmalani@chromium.org
The cros_unregister_ports() function can be called in situations where
the partner has not been registered yet, and so its related data
structures would not have been initialized. Calling
cros_typec_remove_partner() in such a situation can lead to null pointer
dereferences. So, only call cros_typec_remove_partner() if there is a
valid registered partner pointer.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-3-pmalani@chromium.org
Move the cros_typec_set_port_params_v0/v1() functions closer to the
place where they are called, cros_typec_port_update().
While we are performing the relocation, also move cros_typec_get_mux_info()
closer to its call-site.
No functional changes are introduced by this commit.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-2-pmalani@chromium.org
The EC sends an RTC host event when the RTC fires, but we don't need to
treat that as a wakeup event here. The RTC class already properly
handles activating and deactivating a wakeup source in rtc_update_irq()
by calling pm_stay_awake() at the start of processing and pm_relax()
once all expired RTC timers have been processed. This reduces one wakeup
increment but not much else. I noticed this while debugging RTC wakeups
and how they always incremented the wakeup count by two instead of one
because this is duplicated.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: <linux-rtc@vger.kernel.org>
Link: https://lore.kernel.org/r/20201030232523.2654478-1-swboyd@chromium.org
Since cros_ec_cmd_xfer_status() now returns Linux error codes and all
other files use that command, remove the now-unused function
cros_ec_cmd_xfer().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since all the other call-sites of cros_ec_cmd_xfer() have been converted
to use cros_ec_cmd_xfer_status() instead, update the remaining
call-sites to prepare for the merge of cros_ec_cmd_xfer() into
cros_ec_cmd_xfer_status().
As part of this update, change the error handling inside
cros_ec_get_sensor_count() such that the legacy LPC interface is tried
on all error values, not just when msg->result != EC_RESULT_SUCCESS.
Note that there is a slight change in API in cros_ec_get_sensor_count():
it will return a negative number of sensors when there are no sensors
on arm platform when MOTIONSENSE_CMD_DUMP is not supported (typical for
sensorless chromebook) instead of 0. However, this is not a problem when
probing the EC as we ignore errors only looking for cros_ec_get_sensor_count()
returning a positive number of sensors.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The MFD_CROS_EC config was a transitional Kconfig option to not break
current defconfigs in the kernel. Now, this is not required anymore
because all the defconfigs have been removed this option and migrated to
enable the CrOS EC parts individually.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
By default, the lightbar commands are set to the biggest lightbar command
and response. That length is greater than 128 bytes and may not work on
all machines. But all EC are probed for lightbar by sending a get version
request. Set that request size precisely.
Before the command would be:
cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 194, insize: 128, result: 0
Afer:
cros_ec_cmd: version: 0, command: EC_CMD_LIGHTBAR_CMD, outsize: 1, insize: 8, result: 0
Fixes: a841178445 ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
In ftrace, add more fields to the cros_ec command event:
- Add size of commands to check if they are properly set.
- Add offset (in case an EC is cascaded being another EC),
to allow proper command output
With:
echo 1 > events/cros_ec/cros_ec_cmd/enable
We now have (on samus)
Invalid command for the sensor stack:
ectool-6942 [002] .... 3082.783116: cros_ec_request_done: version: 3,
offset: 0, command: EC_CMD_MOTION_SENSE_CMD, outsize: 2, insize: 19,
ec result: EC_RES_INVALID_PARAM, retval: 0
Powerd accessing PD EC being the main EC:
powerd-1272 [002] .... 40.644026: cros_ec_request_done: version: 0,
offset: 1, command: EC_CMD_USB_PD_POWER_INFO, outsize: 1, insize: 16,
ec result: EC_RES_SUCCESS, retval: 16
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
As per USB Type-C Spec R2.0 section 4.5.1.2 (Connecting Sources and Sinks)
and section 4.5.2.2 (Connection State Machine Requirements), the typical
flow for configuring a device connected to a typeC port is as below:
1. Source/sink detection
2. Orientation
3. Data role
4. VCONN
5. VBUS (USB Type-C currents)
6. The connector is now configured. We can start the PD communication
that should lead into configuration of the mux if we enter a mode.
But in existing code data role was set after the connector and mux are
already configured. So fix this by following the spec to set the data
role before the connector and mux are configured.
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
On disconnect port partner is removed and usb role is set to NONE.
But then in cros_typec_port_update() the role is set again.
Avoid this by moving usb_role_switch_set_role() to
cros_typec_configure_mux().
Suggested-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
usb_role_switch_set_role() has the second argument as enum for usb_role.
Currently depending upon the data role i.e. UFP(0) or DFP(1) is sent.
This eventually translates to USB_ROLE_NONE in case of UFP and
USB_ROLE_DEVICE in case of DFP. Correct this by sending correct enum
values as USB_ROLE_DEVICE in case of UFP and USB_ROLE_HOST in case of
DFP.
Fixes: 7e7def15fa ("platform/chrome: cros_ec_typec: Add USB mux control")
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
With USB4 mode the mux driver needs the Enter_USB Data
Object (EUDO) that was used when the USB mode was entered.
Though the object is not available in the driver, it is
possible to construct it from the information we have.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
The EC reports a variety of error codes. Most of those, with the exception
of EC_RES_INVALID_VERSION, are converted to -EPROTO. As result, the actual
EC error code gets lost. Introduce cros_ec_map_error() to map EC error
codes to Linux error codes, and use it in cros_ec_cmd_xfer_status() to
report more meaningful errors to the caller. With this change, callers of
cros_ec_cmd_xfer_status() can implement a more distinguished action without
having to rely on the EC error code. At the same time, debugging is improved
in situations where the Linux error code is reported to userspace and/or in
the kernel log.
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
