The checkpatch tool complains that "virtio,rproc" is not documented.
But it is not possible to probe the device "rproc-virtio" by declaring
it in the device tree. So documenting it in the bindings does not make
sense.
This commit solves the checkpatch warning by suppressing the useless
of_match_table.
Suggested-by: Rob Herring <robh@kernel.org>
Fixes: 1d7b61c06d ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005081317.3411684-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current logic only support main processor to stop/start the remote
processor after crash. However to SoC, such as i.MX8QM/QXP, the
remote processor could do attach recovery after crash and trigger watchdog
to reboot itself. It does not need main processor to load image, or
stop/start remote processor.
Introduce two functions: rproc_attach_recovery, rproc_boot_recovery
for the two cases. Boot recovery is as before, let main processor to
help recovery, while attach recovery is to recover itself without help.
To attach recovery, we only do detach and attach.
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220928064756.4059662-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
remote processor may support:
- boot recovery with help from main processor
- self recovery without help from main processor
- iommu
- etc
Introduce rproc features could simplify code to avoid adding more bool
flags
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220928064756.4059662-2-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Define a platform driver to manage the remoteproc virtio device as
a platform devices.
The platform device allows to pass rproc_vdev_data platform data to
specify properties that are stored in the rproc_vdev structure.
Such approach will allow to preserve legacy remoteproc virtio device
creation but also to probe the device using device tree mechanism.
remoteproc_virtio.c update:
- Add rproc_virtio_driver platform driver. The probe ops replaces
the rproc_rvdev_add_device function.
- All reference to the rvdev->dev has been updated to rvdev-pdev->dev.
- rproc_rvdev_release is removed as associated to the rvdev device.
- The use of rvdev->kref counter is replaced by get/put_device on the
remoteproc virtio platform device.
- The vdev device no longer increments rproc device counter.
increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove
function in charge of the vrings allocation/free.
remoteproc_core.c update:
Migrate from the rvdev device to the rvdev platform device.
From this patch, when a vdev resource is found in the resource table
the remoteproc core register a platform device.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220921135044.917140-5-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Move functions related to the management of the rproc_vdev
structure in the remoteproc_virtio.c.
The aim is to decorrelate as possible the virtio management from
the core part.
Due to the strong correlation between the vrings and the resource table
the rproc_alloc/parse/free_vring functions are kept in the remoteproc core.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220921135044.917140-4-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The rproc structure contains a list of registered rproc_vdev structure.
To be able to move the management of the rproc_vdev structure in
remoteproc_virtio.c (i.e rproc_rvdev_add_device function),
introduce the rproc_add_rvdev and rproc_remove_rvdev functions.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220921135044.917140-3-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In preparation of the migration of the management of rvdev in
remoteproc_virtio.c, this patch spins off a new function to manage the
remoteproc virtio device creation.
The rproc_rvdev_add_device will be moved to remoteproc_virtio.c.
The rproc_vdev_data structure is introduced to provide information for
the rvdev creation. This structure allows to manage the rvdev and vrings
allocation in the rproc_rvdev_add_device function.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220921135044.917140-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The struct_size() macro protects against integer overflows but adding
"+ rsc->config_len" introduces the risk of integer overflows again.
Use size_add() to be safe.
Fixes: c878465715 ("remoteproc: use struct_size() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/YyMyoPoGOJUcEpZT@kili
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Note that there is a behavior change in the driver: previously the
driver did not actually request GPIO, it simply parsed GPIO number out
of device tree and poked at it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/Yxe20ehiOnitDGus@google.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
dev_err_probe() already prints the error code in a human readable way, so
there is no need to duplicate it as a numerical value at the end of the
message.
While at it, remove 'ret' that is mostly useless.
Fixes: 2df7062002 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6b9343c2688117a340661d8ee491c2962c54a09a.1659736936.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This reverts commit a10fba0377: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba0377 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net can display the maximum (supported by hardware) ring size in
ethtool -g eth0.
When the subsequent patch implements vring reset, it can judge whether
the ring size passed by the driver is legal based on this.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename the member len in the structure rpoc_vring to num. And remove 'in
bytes' from the comment of it. This is misleading. Because this actually
refers to the size of the virtio vring to be created. The unit is not
bytes.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20220624025621.128843-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
devm_regulator_get_optional() API will return -ENODEV if the regulator was
not found. For the optional supplies CX, PX we should not fail in that case
but rather continue. So let's catch that error and continue silently if
those regulators are not found.
The commit 3f52d118f9 ("remoteproc: qcom_q6v5_pas: Deal silently with
optional px and cx regulators") was supposed to do the same but it missed
the fact that devm_regulator_get_optional() API returns -ENODEV when the
regulator was not found.
Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 3f52d118f9 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators")
Reported-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220801053939.12556-1-manivannan.sadhasivam@linaro.org
There could be a scenario when there is too much load on a core
(n number of tasks which is affined) or in a case when multiple
rproc subsystem is going for recovery, they queue their recovery
work to one core so even though subsystem are independent their
recovery will be delayed if one of the subsystem recovery work
is taking more time in completing.
If we make this queue unbounded, the recovery work could be picked
on any cpu. This patch is trying to address this.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1650367554-15510-1-git-send-email-quic_mojha@quicinc.com
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411013656.2517150-1-chi.minghao@zte.com.cn
Use _get_optional as some platforms might not provide the px
and cx regulators. This avoids printing the following for each
unavailable regulator:
[ 4.350229] qcom_q6v5_pas 5c00000.remoteproc: supply cx not found,
using dummy regulator
[ 4.374224] qcom_q6v5_pas 5c00000.remoteproc: supply px not found,
using dummy regulator
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713152835.3848875-1-abel.vesa@linaro.org
When a new remoteproc boots up, send the sysmon state notification
of only running remoteprocs. Sending state of remoteprocs booting
up in parallel can cause a race between SSR clients of the remoteproc
that is booting up and the sysmon notification for the same remoteproc,
resulting in an inconsistency between which state the remoteproc that
is booting up in parallel.
For example - if remoteproc A and B crash one after the other, after
remoteproc A boots up, if the remoteproc A tries to get the state of
remoteproc B before the sysmon subdevice for B is invoked but after
the ssr subdevice of B has been invoked, clients on remoteproc A
might get confused when the sysmon notification indicates a different
state.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-8-git-send-email-quic_sibis@quicinc.com
The SSCTL service comes up after a finite time when the remote Q6 comes
out of reset. Any graceful shutdowns requested during this period will
be a NOP and abrupt tearing down of the glink channel might lead to pending
transactions on the remote Q6 side and will ultimately lead to a fatal
error. Fix this by waiting for the SSCTL service when a graceful shutdown
is requested.
Fixes: 1fb82ee806 ("remoteproc: qcom: Introduce sysmon")
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-7-git-send-email-quic_sibis@quicinc.com
Due to firmware bugs on the Q6 the hardware watchdog irq can be triggered
multiple times. As the remoteproc framework schedules work items for the
recovery process, if the other threads do not get a chance to run before
recovery is completed the proceeding threads will see the state of the
remoteproc as running and kill the remoteproc while it is running. This
can result in various SMMU and NOC errors. This change sets the state of
the remoteproc to offline whenever a watchdog irq is received.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-6-git-send-email-quic_sibis@quicinc.com
Client drivers need to check if coredump is enabled for the rproc before
continuing with coredump generation. This change adds a check in the PAS
driver.
Fixes: 8ed8485c4f ("remoteproc: qcom: Add capability to collect minidumps")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-5-git-send-email-quic_sibis@quicinc.com
device_wakeup_enable() on its own is not capable of setting
device as wakeup capable, it needs to be used in conjunction
with device_set_wakeup_capable(). The device_init_wakeup()
calls both these functions on the device passed.
Fixes: a781e5aa59 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-4-git-send-email-quic_sibis@quicinc.com
The pas driver remaps the entire carveout region using the dev_ioremap_wc()
call, which is then used in the adsp_da_to_va() calls made by the rproc
framework. This change marks the va returned by this call as an iomem va.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-3-git-send-email-quic_sibis@quicinc.com
The initial shutdown request to modem on SM8450 SoCs would start the
decryption process and will keep returning errors until the modem shutdown
is complete. Fix this by retrying shutdowns in fixed intervals.
Err Logs on modem shutdown:
qcom_q6v5_pas 4080000.remoteproc: failed to shutdown: -22
remoteproc remoteproc3: can't stop rproc: -22
Fixes: 5cef9b4845 ("remoteproc: qcom: pas: Add SM8450 remoteproc support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657022900-2049-2-git-send-email-quic_sibis@quicinc.com
MSM8996 follows the rest of MSS devices and requires a vote on MX and CX
power domains. Add corresponding entry to the device data.
Fixes: 4760a896be ("remoteproc: q6v5-mss: Vote for rpmh power domains")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704162202.819051-1-dmitry.baryshkov@linaro.org
Make the MSS q6v5 remoteproc drivers implement the panic handler
that will invoke a stop to prepare the remoteprocs for post mortem
debugging.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-3-git-send-email-quic_sibis@quicinc.com
Update MBA text logs location/size in IMEM to aid tools extract
them after ramdump collection. The size of the MBA text logs is
pre-determined and limited to 4K.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1653396335-6295-2-git-send-email-quic_sibis@quicinc.com
The application processor accessing the dynamically assigned metadata
region after assigning it to the remote Q6 would lead to an XPU violation.
Fix this by un-mapping the metadata region post firmware header copy. The
metadata region is freed only after the modem Q6 is done with fw header
authentication.
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1652248625-990-1-git-send-email-quic_sibis@quicinc.com
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220428064545.3850057-1-ran.jianping@zte.com.cn
MT8188 SCP has two RISC-V cores and similar to MT8195 with some
differences. The MT8188 SCP doesn't have the l1tcm and fix the
DSP EMI issue on MT8195.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220715051821.30707-3-tinghan.shen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The wcnss_get_irq function is expected to return a value > 0 in the
event that an IRQ is succssfully obtained, but it instead returns 0.
This causes the stop and ready IRQs to never actually be used despite
being defined in the device-tree. This patch fixes that.
Fixes: aed361adca ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-2-sireeshkodali1@gmail.com
The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.
Enhance the existing PRU remoteproc driver to support the PRU cores
by using specific compatibles. The initial names for the firmware
images for each PRU core are retrieved from DT nodes, and can be adjusted
through sysfs if required.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220602101920.12504-4-kishon@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This patch is for enabling cache in SCP. There is not enough space
on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
and latency is much larger than SRAM, so cache is used to mitigate
the negative effects for performance. We set SCP registers for cache
size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
in SRAM from 0x7bdb0 to 0x3bdb0 for enabling cache.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Tested-by: TingHan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220701121229.22756-2-allen-kh.cheng@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
This function has two paths missing of_node_put().
Fixes: 6e962bfe56 ("remoteproc: imx_rproc: add missing of_node_put")
Fixes: a0ff4aa6f0 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220512045558.7142-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20220605083334.23942-1-linmq006@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
i.MX93 features a Cortex-M33 core which could be kicked by ROM/Bootloader
/Linux. Similar with i.MX8MN/P, we use SMC to trap into Arm Trusted
Firmware to start/stop the M33 core.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220429005346.2108279-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The SCP firmware blob differs between platforms and SoCs. We add
support in the SCP driver for reading the path of firmware file from
DT in order to allow these files to live in a generic file system
(or linux-firmware).
The firmware-name property is optional and the code falls back to the
old filename if the property isn't present.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220419123331.14377-3-allen-kh.cheng@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Among the subsystems in the Qualcomm sc8280xp platform we find an audio
and two compute DSPs. Add support for controlling these using the
peripheral authentication service (PAS) remoteproc driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220408220539.625301-2-bjorn.andersson@linaro.org
Resource table is used by Linux to get information published by
remote processor. It should be not be used for memory allocation, so
not create rproc mem entry.
Fixes: b29b4249f8 ("remoteproc: imx_rproc: add i.MX specific parse fw hook")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220415025737.1561976-1-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no mutex protection of these state checking for 'stop'
and 'detach' which can't guarantee there is no another instance
is trying to do same operation.
Consider two instances case:
Instance1: echo stop > /sys/class/remoteproc/remoteproc0/state
Instance2: echo stop > /sys/class/remoteproc/remoteproc0/state
The issue is that the instance2 case may success, Or it
may fail with -EINVAL, which is uncertain.
So move this state checking in rproc_cdev_write() and
state_store() for 'stop', 'detach' operation to
'rproc_shutdown' , 'rproc_detach' function under the mutex
protection.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1648434012-16655-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
