They all take an ocfs2_alloc_context, which has the allocation inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
A discontiguous block group can find a range of free bits that straddle
more than one region of its space. Callers can't handle that, so we
trim the returned bits until they fit within one region.
Only cluster allocations ask for min_bits>1. Discontiguous block groups
are only for block allocations. So min_bits doesn't matter here.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We're going to be adding more info to a suballocator allocation. Rather
than growing every function in the chain, let's pass a result structure
around.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
If we cannot get a contiguous region for a block group, allocate a
discontiguous one when the filesystem supports it.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Defines the OCFS2_FEATURE_INCOMPAT_DISCONTIG_BG feature bit and modifies
struct ocfs2_group_desc for the feature.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
ocfs2_set_acl() and ocfs2_init_acl() were setting i_mode on the in-memory
inode, but never setting it on the disk copy. Thus, acls were some times not
getting propagated between nodes. This patch fixes the issue by adding a
helper function ocfs2_acl_set_mode() which does this the right way.
ocfs2_set_acl() and ocfs2_init_acl() are then updated to call
ocfs2_acl_set_mode().
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In reflink, we need to upate i_blocks for the target inode.
Reported-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_validate_gd_parent, we check bg_chain against the
cl_next_free_rec of the dinode. Actually in resize, we have
the chance of bg_chain == cl_next_free_rec. So add some
additional condition check for it.
I also rename paramter "clean_error" to "resize", since the
old one is not clearly enough to indicate that we should only
meet with this case in resize.
btw, the correpsonding bug is
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1230.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_lock() will skip locks on file which has mode set to 02666. This
is a problem in cases where the mode of the file is changed after a
process has obtained a lock on the file.
ocfs2_lock() should skip the check for mandatory locks when unlocking a
file.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
doc: fix typo in comment explaining rb_tree usage
Remove fs/ntfs/ChangeLog
doc: fix console doc typo
doc: cpuset: Update the cpuset flag file
Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
Remove drivers/parport/ChangeLog
Remove drivers/char/ChangeLog
doc: typo - Table 1-2 should refer to "status", not "statm"
tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
devres/irq: Fix devm_irq_match comment
Remove reference to kthread_create_on_cpu
tree-wide: Assorted spelling fixes
tree-wide: fix 'lenght' typo in comments and code
drm/kms: fix spelling in error message
doc: capitalization and other minor fixes in pnp doc
devres: typo fix s/dev/devm/
Remove redundant trailing semicolons from macros
fix typo "definetly" -> "definitely" in comment
tree-wide: s/widht/width/g typo in comments
...
Fix trivial conflict in Documentation/laptops/00-INDEX
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Constify struct sysfs_ops.
This is part of the ops structure constification
effort started by Arjan van de Ven et al.
Benefits of this constification:
* prevents modification of data that is shared
(referenced) by many other structure instances
at runtime
* detects/prevents accidental (but not intentional)
modification attempts on archs that enforce
read-only kernel data at runtime
* potentially better optimized code as the compiler
can assume that the const data cannot be changed
* the compiler/linker move const data into .rodata
and therefore exclude them from false sharing
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename for_each_bit to for_each_set_bit in the kernel source tree. To
permit for_each_clear_bit(), should that ever be added.
The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit(). This is a (very) temporary thing to ease the migration.
[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently clear_inode calls vfs_dq_drop directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the drop inside the ->clear_inode
superblock operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_inode and free_inode dquot operations - they are
always called from the filesystem and if a filesystem really needs
their own (which none currently does) it can just call into it's
own routine directly.
Also get rid of the vfs_dq_alloc/vfs_dq_free wrappers and always
call the lowlevel dquot_alloc_inode / dqout_free_inode routines
directly, which now lose the number argument which is always 1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.
Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not. Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently we were adding ioctl cmds/structures for ocfs2 into ocfs2_fs.h
which was used for define ocfs2 on-disk layout. That sounds a little bit
confusing, and it may be quickly polluted espcially when growing the
ocfs2_info_request ioctls afterwards(it will grow i bet).
As a result, such OCFS2 IOCs do need to be placed somewhere other than
ocfs2_fs.h, a separated ocfs2_ioctl.h will be added to store such ioctl
structures and definitions which could also be used from userspace to
invoke ioctls call.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch makes ocfs2 send SIGXFSZ if new file size exceeds the rlimit.
Processes may get SIGXFSZ on one node (in the cluster) while others will
not on another if file size limits are different on the two nodes.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Make use of the newly added BASTS masklog to trace ASTs and BASTs in userdlm.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch adds a new masklog and uses it allow tracing ASTs and BASTs
in the dlmglue layer. This has been found to be very useful in debugging
cluster locking issues.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If a node down event happens while dlm shutdown in progress, dlm recovery
should be done before dlm is shutdown. We can't migrate unrecovered locks,
obviously. But dlm_reco_thread only does recovery if the dlm_state is
in DLM_CTXT_JOINED.
dlm_reco_thread should do recovery if dlm_state is in DLM_CTXT_JOINED or
DLM_CTXT_IN_SHUTDOWN.
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_direct_IO_get_blocks, we only need to bug out
in case of we are going to write a recounted extent rec.
What a silly bug introduced by me!
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
This patch fixes a compiling warning in ocfs2_file_aio_write().
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Unlike ocfs2, dlmfs has no permanent storage. It can't store off a
cluster stack it is supposed to be using. So it can't specify the stack
name in ocfs2_cluster_connect().
Instead, we create ocfs2_cluster_connect_agnostic(), which simply uses
the stack that is currently enabled. This is find for dlmfs, which will
rely on the stack initialization.
We add the "stackglue" capability to dlmfs's capability list. This lets
userspace know dlmfs can be used with all cluster stacks.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Rather than directly using o2dlm, dlmfs can now use the stackglue. This
allows it to use userspace cluster stacks and fs/dlm. This commit
forces o2cb for now. A latter commit will bump the protocol version and
allow non-o2cb stacks.
This is one big sed, really. LKM_xxMODE becomes DLM_LOCK_xx. LKM_flag
becomes DLM_LKF_flag.
We also learn to check that the LVB is valid before reading it. Any DLM
can lose the contents of the LVB during a complicated recovery. userdlm
should be checking this. Now it does. dlmfs will return 0 from read(2)
if the LVB was invalid.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We want folks using dlmfs to be able to use the LVB in places other than
just write(2)/read(2). By ignoring truncate requests, we allow 'echo
"contents" > /dlm/space/lockname' to work.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Inside the stackglue, the locking protocol structure is hanging off of
the ocfs2_cluster_connection. This takes it one further; the locking
protocol is passed into ocfs2_cluster_connect(). Now different cluster
connections can have different locking protocols with distinct asts.
Note that all locking protocols have to keep their maximum protocol
version in lock-step.
With the protocol structure set in ocfs2_cluster_connect(), there is no
need for the stackglue to have a static pointer to a specific protocol
structure. We can change initialization to only pass in the maximum
protocol version.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
With the full ocfs2_locking_protocol hanging off of the
ocfs2_cluster_connection, ast wrappers can get the ast/bast pointers
there. They don't need to get them from their plugin structure.
The user plugin still needs the maximum locking protocol version,
though. This changes the plugin structure so that it only holds the max
version, not the entire ocfs2_locking_protocol pointer.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
With the ocfs2_cluster_connection hanging off of the ocfs2_dlm_lksb, we
have access to it in the ast and bast wrapper functions. Attach the
ocfs2_locking_protocol to the conn.
Now, instead of refering to a static variable for ast/bast pointers, the
wrappers can look at the connection. This means different connections
can have different ast/bast pointers, and it reduces the need for the
static pointer.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We're going to want it in the ast functions, so we convert union
ocfs2_dlm_lksb to struct ocfs2_dlm_lksb and let it carry the connection.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The stackglue ast and bast functions tried to maintain the fiction that
their arguments were void pointers. In reality, stack_user.c had to
know that the argument was an ocfs2_lock_res in order to get the status
off of the lksb. That's ugly.
This changes stackglue to always pass the lksb as the argument to ast
and bast functions. The caller can always use container_of() to get the
ocfs2_lock_res or user_dlm_lock_res. The net effect to the caller is
zero. They still get back the lockres in their ast. stackglue gets
cleaner, and now can use the lksb itself.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We're going to remove the tie between ocfs2_dlmfs and o2dlm.
ocfs2_dlmfs doesn't belong in the fs/ocfs2/dlm directory anymore. Here
we move it to fs/ocfs2/dlmfs.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
o2dlm's userspace filesystem is an easy way to use the DLM from
userspace. It is intentionally simple. For example, it does not allow
for asynchronous behavior or lock conversion. This is intentional to
keep the interface simple.
Because there is no asynchronous notification, there is no way for a
process holding a lock to know another node needs the lock. This is the
number one complaint of ocfs2_dlmfs users. Turns out, we can solve this
very easily. We add poll() support to ocfs2_dlmfs. When a BAST is
received, the lock's file descriptor will receive POLLIN.
This is trivial to implement. Userdlm already has an appropriate
waitqueue, and the lock knows when it is blocked.
We add the "bast" capability to tell userspace this is available.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Over time, dlmfs has added some features that were not part of the
initial ABI. Unfortunately, some of these features are not detectable
via standard usage. For example, Linux's default poll always returns
POLLIN, so there is no way for a caller of poll(2) to know when dlmfs
added poll support. Instead, we provide this list of new capabilities.
Capabilities is a read-only attribute. We do it as a module parameter
so we can discover it whether dlmfs is built in, loaded, or even not
loaded (via modinfo).
The ABI features are local to this machine's dlmfs mount. This is
distinct from the locking protocol, which is concerned with inter-node
interaction.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2 can store extended attribute values as large as a single file. It
does this using a standard ocfs2 btree for the large value. However,
the previous code did not handle all error cases cleanly.
There are multiple problems to have.
1) We have trouble allocating space for a new xattr. This leaves us
with an empty xattr.
2) We overwrote an existing local xattr with a value root, and now we
have an error allocating the storage. This leaves us an empty xattr.
where there used to be a value. The value is lost.
3) We have trouble truncating a reused value. This leaves us with the
original entry pointing to the truncated original value. The value
is lost.
4) We have trouble extending the storage on a reused value. This leaves
us with the original value safely in place, but with more storage
allocated when needed.
This doesn't consider storing local xattrs (values that don't require a
btree). Those only fail when the journal fails.
Case (1) is easy. We just remove the xattr we added. We leak the
storage because we can't safely remove it, but otherwise everything is
happy. We'll print a warning about the leak.
Case (4) is easy. We still have the original value in place. We can
just leave the extra storage attached to this xattr. We return the
error, but the old value is untouched. We print a warning about the
storage.
Case (2) and (3) are hard because we've lost the original values. In
the old code, we ended up with values that could be partially read.
That's not good. Instead, we just wipe the xattr entry and leak the
storage. It stinks that the original value is lost, but now there isn't
a partial value to be read. We'll print a big fat warning.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xattr_ibody_set() is the only remaining user of
ocfs2_xattr_set_entry(). ocfs2_xattr_set_entry() actually does two
things: it calls ocfs2_xa_set(), and it initializes the inline xattrs.
Initializing the inline space really belongs in its own call.
We lift the initialization to ocfs2_xattr_ibody_init(), called from
ocfs2_xattr_ibody_set() only when necessary. Now
ocfs2_xattr_ibody_set() can call ocfs2_xa_set() directly.
ocfs2_xattr_set_entry() goes away.
Another nice fact is that ocfs2_init_dinode_xa_loc() can trust
i_xattr_inline_size.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xattr_block_set() calls into ocfs2_xattr_set_entry() with just the
HAS_XATTR flag. Most of the machinery of ocfs2_xattr_set_entry() is
skipped. All that really happens other than the call to ocfs2_xa_set()
is making sure the HAS_XATTR flag is set on the inode.
But HAS_XATTR should be set when we also set di->i_xattr_loc. And
that's done in ocfs2_create_xattr_block(). So let's move it there, and
then ocfs2_xattr_block_set() can just call ocfs2_xa_set().
While we're there, ocfs2_create_xattr_block() can take the set_ctxt for
a smaller argument list. It also learns to set HAS_XATTR_FL, because it
knows for sure. ocfs2_create_empty_xatttr_block() in the reflink path
fakes a set_ctxt to call ocfs2_create_xattr_block().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xattr_set_in_bucket() doesn't need to do its own hacky space
checking. Let's let ocfs2_xa_prepare_entry() (via ocfs2_xa_set()) do
the more accurate work. Whenever it doesn't have space,
ocfs2_xattr_set_in_bucket() can try to get more space.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xa_set() wraps the ocfs2_xa_prepare_entry()/ocfs2_xa_store_value()
logic. Both callers can now use the same routine. ocfs2_xa_remove()
moves directly into ocfs2_xa_set().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_xa_prepare_entry() gets all the logic to add, remove, or modify
external value trees. Now, when it exits, the entry is ready to receive
a value of any size.
ocfs2_xa_remove() is added to handle the complete removal of an entry.
It truncates the external value tree before calling
ocfs2_xa_remove_entry().
ocfs2_xa_store_inline_value() becomes ocfs2_xa_store_value(). It can
store any value.
ocfs2_xattr_set_entry() loses all the allocation logic and just uses
these functions. ocfs2_xattr_set_value_outside() disappears.
ocfs2_xattr_set_in_bucket() uses these functions and makes
ocfs2_xattr_set_entry_in_bucket() obsolete. That goes away, as does
ocfs2_xattr_bucket_set_value_outside() and
ocfs2_xattr_bucket_value_truncate().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We're going to want to make sure our buffers get accessed and dirtied
correctly. So have the xa_loc do the work. This includes storing the
inode on ocfs2_xa_loc.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We use the ocfs2_xattr_value_buf structure to manage external values.
It lets the value tree code do its work regardless of the containing
storage. ocfs2_xa_fill_value_buf() initializes a value buf from an
ocfs2_xa_loc entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Previously the xattr code would send in a fake value, containing a tree
root, to the function that installed name+value pairs. Instead, we pass
the real value to ocfs2_xa_set_inline_value(), and it notices that the
value cannot fit. Thus, it installs a tree root.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We create two new functions on ocfs2_xa_loc, ocfs2_xa_prepare_entry()
and ocfs2_xa_store_inline_value().
ocfs2_xa_prepare_entry() makes sure that the xl_entry field of
ocfs2_xa_loc is ready to receive an xattr. The entry will point to an
appropriately sized name+value region in storage. If an existing entry
can be reused, it will be. If no entry already exists, it will be
allocated. If there isn't space to allocate it, -ENOSPC will be
returned.
ocfs2_xa_store_inline_value() stores the data that goes into the 'value'
part of the name+value pair. For values that don't fit directly, this
stores the value tree root.
A number of operations are added to ocfs2_xa_loc_operations to support
these functions. This reflects the disparate behaviors of xattr blocks
and buckets.
With these functions, the overlapping ocfs2_xattr_set_entry_local() and
ocfs2_xattr_set_entry_normal() can be replaced with a single call
scheme.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
An ocfs2 xattr entry stores the text name and value as a pair in the
storage area. Obviously names and values can be variable-sized. If a
value is too large for the entry storage, a tree root is stored instead.
The name+value pair is also padded.
Because of this, there are a million places in the code that do:
if (needs_external_tree(value_size)
namevalue_size = pad(name_size) + tree_root_size;
else
namevalue_size = pad(name_size) + pad(value_size);
Let's create some convenience functions to make the code more readable.
There are three forms. The first takes the raw sizes. The second takes
an ocfs2_xattr_info structure. The third takes an existing
ocfs2_xattr_entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Rather than calculating strlen all over the place, let's store the
name length directly on ocfs2_xattr_info.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
struct ocfs2_xattr_info is a useful structure describing an xattr
you'd like to set. Let's put prefixes on the member fields so it's
easier to read and use.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Add ocfs2_xa_remove_entry(), which will remove an xattr entry from its
storage via the ocfs2_xa_loc descriptor.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The ocfs2 extended attribute (xattr) code is very flexible. It can
store xattrs in the inode itself, in an external block, or in a tree of
data structures. This allows the number of xattrs to be bounded by the
filesystem size.
However, the code that manages each possible storage location is
different. Maintaining the ocfs2 xattr code requires changing each hunk
separately.
This patch is the start of a series introducing the ocfs2_xa_loc
structure. This structure wraps the on-disk details of an xattr
entry. The goal is that the generic xattr routines can use
ocfs2_xa_loc without knowing the underlying storage location.
This first pass merely implements the basic structure, initializing it,
and wiping the name+value pair of the entry.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Add current->comm to the standard mlog() output to help with debugging.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When ocfs2 has to do CoW for refcounted extents, we disable direct I/O
and go through the buffered I/O path. This makes the combined check
easier to read.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Connect and disconnect messages are more than informational as they are required
during root cause analysis for failures. This patch changes them from KERN_INFO
to KERN_NOTICE.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Faseh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The debug call printing the name of the lock resource was chopping
off the last character. This patch fixes the problem.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The wrong member was compared in the continguousness check.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During recovery, the dlm frees the locks for the dead node. If it finds a
lock in a resource for the dead node, it expects that node to also have a
ref in that lock resource. If not, it BUGs.
ossbz#1175 was filed with the above BUG. Now, while it is correct that we
should be expecting the ref, I see no reason why we have to BUG. After all,
we are freeing up the lock and clearing the ref.
This patch replaces the BUG_ON with a printk(). Hopefully, that will give
us more clues next time this happens.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1175
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch plugs a race between the downconvert thread and an unlock ast message.
Specifically, after the downconvert worker has done its task, the dc thread needs
to check whether an unlock ast made the downconvert moot.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@sus.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During blocked lock processing, we should consider the possibility that the
lock is no longer blocking.
Joel Becker <joel.becker@oracle.com> assisted in fixing this issue.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During upconvert, if the master were to send a BAST, dlmglue will detect the
upconversion in process and send a cancel convert to the master. Upon receiving
the AST for the cancel convert, it will re-process the lock resource to determine
whether it needs downconverting. Say, the up was from PR to EX and the BAST was
for EX. After the cancel convert, it will need to downconvert to NL.
However, if the node was originally upconverting from NL to EX, then there would
be no reason to downconvert (assuming the same message sequence).
This patch makes dlmglue consider the possibility that the current lock level
is already compatible and that downconverting is not required.
Joel Becker <joel.becker@oracle.com> assisted in fixing this issue.
Fixes ossbz#1178
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1178
Reported-by: Coly Li <coly.li@suse.de>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
There is possibility of a livelock in __ocfs2_cluster_lock(). If a node were
to get an ast for an upconvert request, followed immediately by a bast,
there is a small window where the fs may downconvert the lock before the
process requesting the upconvert is able to take the lock.
This patch adds a new flag to indicate that the upconvert is still in
progress and that the dc thread should not downconvert it right now.
Wengang Wang <wen.gang.wang@oracle.com> and Joel Becker
<joel.becker@oracle.com> contributed heavily to this patch.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During bast, set the OCFS2_LOCK_BLOCKED flag only if the lock needs to
downconverted.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Although we use u64 to pass userspace pointers to the kernel
to avoid compat_ioctl, it doesn't work in some ppc platform.
So wrap them with compat_ptr and add compat_ioctl.
The detailed discussion about compat_ptr can be found in thread
http://lkml.org/lkml/2009/10/27/423.
We indeed met with a bug when testing on ppc(-EFAULT is returned
when using old_path). This patch try to fix this.
I have tested in ppc64(with 32 bit reflink) and x86_64(with i686
reflink), both works.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Mainline commit aad1b15310 made the
dlm_begin_reco_handler() return -EAGAIN instead of EAGAIN.
As this error is transmitted over the wire, we want the receiver,
dlm_send_begin_reco_message(), to understand both the older EAGAIN and
the newer -EAGAIN, to allow rolling upgrade of the cluster nodes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In CoW, we have to make sure that the page is already written
out to the disk. So we have a BUG_ON(PageDirty(page)).
In ppc platform we have pagesize=64K, so if the cs=4K, if the
file have fragmented clusters, we will map the page many times.
See this file as an example.
Tree Depth: 0 Count: 19 Next Free Rec: 14
## Offset Clusters Block# Flags
0 0 4 2164864 0x2 Refcounted
1 4 2 9302792 0x2 Refcounted
...
We have to replace the extent recs one by one, so the page with index 0
will be mapped and dirtied twice.
I'd like to leave the BUG_ON there while adding a check so that in
case we meet with an error in other platforms, we can find it easily.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_duplicate_clusters_by_page, we calculate map_end
by shifting page_index. But actually in case we meet with
a large offset(say in a i686 box, poff_t is only 32 bits
and page_index=2056240), we will overflow. So change the
type of page_index to loff_t.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When a lock resource is migrated, the dlm compares the migrated
locks with that that was already existing on the new node. If the
comparison fails, it BUGs. This patch prints more messages when the
comparison fails inorder to help with the root cause analyis.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1206
This does not fix bz1206. However, if we run into it again, we will
have more information to chew on.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During lock resource migration, o2dlm fills the packet with a LVB from the
first valid lock. For sanity, it ensures that the other valid locks have the
same LVB. If not, it BUGs.
The valid locks are ones that have granted EX or PR lock levels and are either
on the Granted or Converting lists. Locks in the Blocked list cannot have a
valid LVB.
This patch ensures that we skip the locks in the Blocked list.
Fixes oss bugzilla#1202
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1202
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
a local variable "dlm_version" is used as a fs locking version.
rename it fs_version.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2-tools, we have added ocfs2_max_inline_data_with_xattr,
so add it in the kernel's ocfs2_fs.h.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If ->follow_link handler returns an error, it should decrement
nd->path refcnt. But ocfs2_fast_follow_link() doesn't decrement.
This patch fixes the problem by using nd_set_link() style error handling
instead of playing with nd->path.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In case of writing to a refcounted cluster with O_DIRECT,
we need to fall back to buffer write. And when it is finished,
we need to flush the page and the journal as we did for other
O_DIRECT writes.
This patch fix oss bug 1191.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1191
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
ocfs2: Use FIEMAP_EXTENT_SHARED
fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
ocfs2: replace u8 by __u8 in ocfs2_fs.h
ocfs2: explicit declare uninitialized var in user_cluster_connect()
ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
ocfs2: return -EAGAIN instead of EAGAIN in dlm
ocfs2/cluster: Make fence method configurable - v2
ocfs2: Set MS_POSIXACL on remount
ocfs2: Make acl use the default
ocfs2: Always include ACL support
In ocfs2_value_metas_in_xattr_header, we should Use
le16_to_cpu for ocfs2_extent_list.l_next_free_rec.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
I just noticed today that there are 2 places of "mlog(0,...)"
in fs/ocfs2/cluster/heartbeat.c, but actually have no default
mask prefix in that file.
So change them to mlog(ML_HEARTBEAT,...).
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
For fast symlink, it can be treated the same as inlined files since
the data extent we want to return of both case all were stored in
metadata block. For symlink, it can be simply treated the same as we
did for regular files.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Set i_nlink properly during reflink.
ocfs2: Add reflinked file's inode to inode hash eariler.
ocfs2: refcounttree.c cleanup.
ocfs2: Find proper end cpos for a leaf refcount block.
We create a file in orphan dir for reflink so that if there
is any error, we don't create any wrong dentry in the dir.
But actually the file in orphan dir should be i_nlink = 0
so that it can be replayed and freed successfully.
This patch first set i_nlink to 0 when creating the file in
orphan dir and then set it to 1(reflink now only works for
regular file) when we move it to the dest dir.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We used to add reflinked file's inode to inode hash when
we add it to the dest dir. But actually there is a race.
Consider the following sequence.
1. reflink happens and create the inode in orphan dir.
2. reflink thread is scheduled out because of some io.
3. recovery begins to work and calls ocfs2_recover_orphans.
It calls ocfs2_iget and get a new inode and i_count = 1.
It calls iput then and delete inode. the buffer's
uptodate state is cleared.
This patch move insert_inode_hash to the create function so
that it can be found by step 3 and prevented from deleting
because i_count > 1.
This resolves the bug
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1183.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Let userspace have a chance to get the extent info of a
directory just like extN did.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Adds FIEMAP_EXTENT_SHARED flag to refcounted extents.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch replaces date type 'u8' with '__u8', which follows the coding style of ocfs2_fs.h, and portable to user space
for ocfs2-tools.
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch explicitly declares an uninitialized local variable in user_cluster_connect(), to remove a compiling warning.
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
osb->s_mount_opt has already been checked against OCFS2_MOUNT_POSIX_ACL_CHECK before
calling ocfs2_get_acl_nolock() in ocfs2_init_acl() && ocfs2_get_acl(), so remove it.
Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
do_sync_mapping_range(..., SYNC_FILE_RANGE_WRITE) is a very awkward way
to perform a filemap_fdatawrite_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the locking in blockdev_direct_IO is a mess, we have three different
locking types and very confusing checks for some of them. The most
complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be
used.
This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case
is unused anyway, and the write side is almost identical to DIO_NO_LOCKING.
The difference is that DIO_NO_LOCKING always sets the create argument for
the get_blocks callback to zero, but we can easily move that to the actual
get_blocks callbacks. There are four users of the DIO_NO_LOCKING mode:
gfs already ignores the create argument and thus is fine with the new
version, ocfs2 only errors out if create were ever set, and we can remove
this dead code now, the block device code only ever uses create for an
error message if we are fully beyond the device which can never happen,
and last but not least XFS will need the new behavour for writes.
Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag. Separate out the check for not allowing to fill holes into a separate
flag, although for now both flags always get set at the same time.
Also revamp the documentation of the locking scheme to actually make sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move definition of this constant to linux/quota.h so that it
cannot clash with other format IDs.
CC: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
While Linux provided an O_SYNC flag basically since day 1, it took until
Linux 2.4.0-test12pre2 to actually get it implemented for filesystems,
since that day we had generic_osync_around with only minor changes and the
great "For now, when the user asks for O_SYNC, we'll actually give
O_DSYNC" comment. This patch intends to actually give us real O_SYNC
semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC
patches which are required before this patch it's actually surprisingly
simple, we just need to figure out when to set the datasync flag to
vfs_fsync_range and when not.
This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's
numerical value to keep binary compatibility, and adds a new real O_SYNC
flag. To guarantee backwards compatiblity it is defined as expanding to
both the O_DSYNC and the new additional binary flag (__O_SYNC) to make
sure we are backwards-compatible when compiled against the new headers.
This also means that all places that don't care about the differences can
just check O_DSYNC and get the right behaviour for O_SYNC, too - only
places that actuall care need to check __O_SYNC in addition. Drivers and
network filesystems have been updated in a fail safe way to always do the
full sync magic if O_DSYNC is set. The few places setting O_SYNC for
lower layers are kept that way for now to stay failsafe.
We enforce that O_DSYNC is set when __O_SYNC is set early in the open path
to make sure we always get these sane options.
Note that parisc really screwed up their headers as they already define a
O_DSYNC that has always been a no-op. We try to repair it by using it for
the new O_DSYNC and redefinining O_SYNC to send both the traditional
O_SYNC numerical value _and_ the O_DSYNC one.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
mac80211: fix reorder buffer release
iwmc3200wifi: Enable wimax core through module parameter
iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
iwmc3200wifi: Coex table command does not expect a response
iwmc3200wifi: Update wiwi priority table
iwlwifi: driver version track kernel version
iwlwifi: indicate uCode type when fail dump error/event log
iwl3945: remove duplicated event logging code
b43: fix two warnings
ipw2100: fix rebooting hang with driver loaded
cfg80211: indent regulatory messages with spaces
iwmc3200wifi: fix NULL pointer dereference in pmkid update
mac80211: Fix TX status reporting for injected data frames
ath9k: enable 2GHz band only if the device supports it
airo: Fix integer overflow warning
rt2x00: Fix padding bug on L2PAD devices.
WE: Fix set events not propagated
b43legacy: avoid PPC fault during resume
b43: avoid PPC fault during resume
tcp: fix a timewait refcnt race
...
Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
kernel/sysctl_check.c
net/ipv4/sysctl_net_ipv4.c
net/ipv6/addrconf.c
net/sctp/sysctl.c
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
security/tomoyo: Remove now unnecessary handling of security_sysctl.
security/tomoyo: Add a special case to handle accesses through the internal proc mount.
sysctl: Drop & in front of every proc_handler.
sysctl: Remove CTL_NONE and CTL_UNNUMBERED
sysctl: kill dead ctl_handler definitions.
sysctl: Remove the last of the generic binary sysctl support
sysctl net: Remove unused binary sysctl code
sysctl security/tomoyo: Don't look at ctl_name
sysctl arm: Remove binary sysctl support
sysctl x86: Remove dead binary sysctl support
sysctl sh: Remove dead binary sysctl support
sysctl powerpc: Remove dead binary sysctl support
sysctl ia64: Remove dead binary sysctl support
sysctl s390: Remove dead sysctl binary support
sysctl frv: Remove dead binary sysctl support
sysctl mips/lasat: Remove dead binary sysctl support
sysctl drivers: Remove dead binary sysctl support
sysctl crypto: Remove dead binary sysctl support
sysctl security/keys: Remove dead binary sysctl support
sysctl kernel: Remove binary sysctl logic
...
We used to return positive EAGAIN to indicate a retry action
is needed in dlm_begin_reco_handler(). Now we return negative
-EAGAIN to erase the confusion caused by this error code.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
By default, o2cb fences the box by calling emergency_restart(). While this
scheme works well in production, it comes in the way during testing as it
does not let the tester take stack/core dumps for analysis.
This patch allows user to dynamically change the fence method to panic() by:
# echo "panic" > /sys/kernel/config/cluster/<clustername>/fence_method
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
sparse check finds some endian problem and some other minor issues.
There is an obsolete function which should be removed.
So this patch resolve all these.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2 refcount tree is stored as an extent tree while
the leaf ocfs2_refcount_rec points to a refcount block.
The following step can trip a kernel panic.
mkfs.ocfs2 -b 512 -C 1M --fs-features=refcount $DEVICE
mount -t ocfs2 $DEVICE $MNT_DIR
FILE_NAME=$RANDOM
FILE_NAME_1=$RANDOM
FILE_REF="${FILE_NAME}_ref"
FILE_REF_1="${FILE_NAME}_ref_1"
for((i=0;i<305;i++))
do
# /mnt/1048576 is a file with 1048576 sizes.
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1
done
for((i=0;i<3;i++))
do
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
done
for((i=0;i<2;i++))
do
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1
done
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
for((i=0;i<11;i++))
do
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME
cat /mnt/1048576 >> $MNT_DIR/$FILE_NAME_1
done
reflink $MNT_DIR/$FILE_NAME $MNT_DIR/$FILE_REF
# write_f is a program which will write some bytes to a file at offset.
# write_f -f file_name -l offset -w write_bytes.
./write_f -f $MNT_DIR/$FILE_REF -l $[310*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_REF -l $[306*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_REF -l $[311*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_NAME -l $[310*1048576] -w 4096
./write_f -f $MNT_DIR/$FILE_NAME -l $[311*1048576] -w 4096
reflink $MNT_DIR/$FILE_NAME $MNT_DIR/$FILE_REF_1
./write_f -f $MNT_DIR/$FILE_NAME -l $[311*1048576] -w 4096
#kernel panic here.
The reason is that if the ocfs2_extent_rec is the last record
in a leaf extent block, the old solution fails to find the
suitable end cpos. So this patch try to walk through the b-tree,
find the next sub root and get the c_pos the next sub-tree starts
from.
btw, I have runned tristan's test case against the patched kernel
for several days and this type of kernel panic never happens again.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
For consistency drop & in front of every proc_handler. Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Mainline commit 53ef99cad9 removed the
JBD compatibility layer from OCFS2. This patch removes the last remaining
remnants of that.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Now that sys_sysctl is a generic wrapper around /proc/sys .ctl_name
and .strategy members of sysctl tables are dead code. Remove them.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Currently the f_fsid of struct kstatfs returned from ocfs2_statfs() is
undefined (vfs layer fills in 0 as default). Since in some conditions,
f_fsid value might be used in a (f_fsid, ino) pair to uniquely identify
a file, ocfs2 should return a unique defined f_fsid value from
ocfs2_statfs().
Because uuid_str is the same on big or litlle endian machine, it's
endian consistent to use osb->uuid_str to generate f_fsid value.
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Sunil Mushran <sunil.mushran@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We have to set MS_POSIXACL on remount as well. Otherwise VFS
would not know we started supporting ACLs after remount and
thus ACLs would not work.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Change acl mount options handling to match the one of XFS and BTRFS and
hopefully it is also easier to use now. When admin does not specify any
acl mount option, acls are enabled if and only if the filesystem has
xattr feature enabled. If admin specifies 'acl' mount option, we fail
the mount if the filesystem does not have xattr feature and thus acls
cannot be enabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
To become consistent with filesystems such as XFS or BTRFS, make posix
ACLs always available. This also reduces possibility of
misconfiguration on admin's side.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The old reflink fails to handle inodes with inline data and will oops
if it encounters them. This patch copies inline data to the new inode.
Extended attributes may still be refcounted.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
As its name ocfs2_complete_reflink indicates, it should
be called after all the work for reflink is done, so
it really should be called after we reflink xattr
successfully.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
In case of non-modular kernels the root filesystem is mounted by trying
several filesystems. If ocfs2 was tried before the actual filesystem
type, the mount would fail because ocfs2_sb_probe() returns -EAGAIN
instead of -EINVAL. ocfs2 will now return -EINVAL properly.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reported-by: Laszlo Attila Toth <panther@balabit.hu>
In order to have better cache layouts of struct sock (separate zones
for rx/tx paths), we need this preliminary patch.
Goal is to transfert fields used at lookup time in the first
read-mostly cache line (inside struct sock_common) and move sk_refcnt
to a separate cache line (only written by rx path)
This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr,
sport and id fields. This allows a future patch to define these
fields as macros, like sk_refcnt, without name clashes.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code
But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
HWPOISON: Enable error_remove_page on btrfs
HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
HWPOISON: Add madvise() based injector for hardware poisoned pages v4
HWPOISON: Enable error_remove_page for NFS
HWPOISON: Enable .remove_error_page for migration aware file systems
HWPOISON: The high level memory error handler in the VM v7
HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
HWPOISON: shmem: call set_page_dirty() with locked page
HWPOISON: Define a new error_remove_page address space op for async truncation
HWPOISON: Add invalidate_inode_page
HWPOISON: Refactor truncate to allow direct truncating of page v2
HWPOISON: check and isolate corrupted free pages v2
HWPOISON: Handle hardware poisoned pages in try_to_unmap
HWPOISON: Use bitmask/action code for try_to_unmap behaviour
HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
HWPOISON: Add poison check to page fault handling
HWPOISON: Add basic support for poisoned pages in fault handler v3
HWPOISON: Add new SIGBUS error codes for hardware poison signals
HWPOISON: Add support for poison swap entries v2
HWPOISON: Export some rmap vma locking to outside world
...
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need it
NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (85 commits)
ocfs2: Use buffer IO if we are appending a file.
ocfs2: add spinlock protection when dealing with lockres->purge.
dlmglue.c: add missed mlog lines
ocfs2: __ocfs2_abort() should not enable panic for local mounts
ocfs2: Add ioctl for reflink.
ocfs2: Enable refcount tree support.
ocfs2: Implement ocfs2_reflink.
ocfs2: Add preserve to reflink.
ocfs2: Create reflinked file in orphan dir.
ocfs2: Use proper parameter for some inode operation.
ocfs2: Make transaction extend more efficient.
ocfs2: Don't merge in 1st refcount ops of reflink.
ocfs2: Modify removing xattr process for refcount.
ocfs2: Add reflink support for xattr.
ocfs2: Create an xattr indexed block if needed.
ocfs2: Call refcount tree remove process properly.
ocfs2: Attach xattr clusters to refcount tree.
ocfs2: Abstract ocfs2 xattr tree extend rec iteration process.
ocfs2: Abstract the creation of xattr block.
ocfs2: Remove inode from ocfs2_xattr_bucket_get_name_value.
...
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.
This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ocfs2_file_aio_write, we will prevent direct io if
we find that we are appending(changing i_size) and call
generic_file_aio_write_nolock. But actually O_DIRECT flag
is there and this function will call generic_file_direct_write
eventually which will update i_size and leave di->i_size
alone. The bug is
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1173.
So this patch let ocfs2_direct_IO returns 0 directly if we
are appending so that buffered write will be called and
di->i_size get updated successfully. And this is also
what we want in ocfs2_file_aio_write.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
when we check/modify lockres->purge, we should with the protection of lockres->spinlock.
in dlm_purge_lockres(), the checking/modifying is not with the protectin.
this patch fixes it.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch adds the missed mlog_exit() and mlog_exit_void() lines when routines
return.
Signed-off-by: Coly Li <coly.li@suse.de>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In a clustered setup, we have to panic the box on journal abort. This is
because we don't have the facility to go hard readonly. With hard ro, another
node would detect node failure and initiate recovery.
Having said that, we shouldn't force panic if the volume is mounted locally.
This patch defers the handling to the mount option, errors.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The ioctl will take 3 parameters: old_path, new_path and
preserve and call vfs_reflink. It is useful when we backport
reflink features to old kernels.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
reflink has 2 options for the destination file:
1. snapshot: reflink will attempt to preserve ownership, permissions,
and all other security state in order to create a full snapshot.
2. new file: it will acquire the data extent sharing but will see the
file's security state and attributes initialized as a new file.
So add the option to ocfs2.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
reflink is a very complicated process, so it can't be integrated
into one transaction. So if the system panic in the operation, we
may leave a unfinished inode in the destication directory.
So we will try to create an inode in orphan_dir first, reflink it
to the src file and then move it to the destication file in the end.
In that way we won't be afraid of any corruption during the reflink.
This patch adds 2 functions for orphan_dir operation:
1. Create a new inode in orphand dir.
2. Move an inode to a target dir.
Note:
fsck.ocfs2 should work for us to remove the unfinished file in the
orphan_dir.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In order to make the original function more suitable for reflink,
we modify the following inode operations. Both are tiny.
1. ocfs2_mknod_locked only use dentry for mlog, so move it to
the caller so that reflink can use it without dentry.
2. ocfs2_prepare_orphan_dir only want inode to get its ip_blkno.
So use ip_blkno instead.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In ocfs2_extend_rotate_transaction, op_credits is the orignal
credits in the handle and we only want to extend the credits
for the rotation, but the old solution always double it. It
is harmless for some minor operations, but for actions like
reflink we may rotate tree many times and cause the credits
increase dramatically. So this patch try to only increase
the desired credits.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Actually the whole reflink will touch refcount tree 2 times:
1. It will add the clusters in the extent record to the tree if it
isn't refcounted before.
2. It will add 1 refcount to these clusters when it add these
extent records to the tree.
So actually we shouldn't do merge in the 1st operation since the 2nd
one will soon be called and we may have to split it again. Do a merge
first and split soon is a waste of time. So we only merge in the 2nd
round. This is done by adding a new internal __ocfs2_increase_refcount
and call it with "not-merge" for 1st refcount operation in reflink.
This also has a side-effect that we don't need to worry too much about
the metadata allocation in the 2nd round since it will only merge and
no split will happen for those records.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
The old xattr value remove is quite simple, it just erase the
tree and free the clusters. But as we have added refcount support,
The process is a little complicated.
We have to lock the refcount tree at the beginning, what's more,
we may split the refcount tree in some cases, so meta/credits are
needed.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
With reflink, there is a need that we create a new xattr indexed
block from the very beginning. So add a new parameter for
ocfs2_create_xattr_block.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Now with xattr refcount support, we need to check whether
we have xattr refcounted before we remove the refcount tree.
Now the mechanism is:
1) Check whether i_clusters == 0, if no, exit.
2) check whether we have i_xattr_loc in dinode. if yes, exit.
2) Check whether we have inline xattr stored outside, if yes, exit.
4) Remove the tree.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In ocfs2, when xattr's value is larger than OCFS2_XATTR_INLINE_SIZE,
it will be kept outside of the blocks we store xattr entry. And they
are stored in a b-tree also. So this patch try to attach all these
clusters to refcount tree also.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Currently we have ocfs2_iterate_xattr_buckets which can receive
a para and a callback to iterate a series of bucket. It is good.
But actually the 2 callers ocfs2_xattr_tree_list_index_block and
ocfs2_delete_xattr_index_block are almost the same. The only
difference is that the latter need to handle the extent record
also. So add a new function named ocfs2_iterate_xattr_index_block.
It can be given func callback which are used for exten record.
So now we only have one iteration function for the xattr index
block. Ane what's more, it is useful for our future reflink
operations.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In order to make 2 transcation(xattr and cow) independent with each other,
we CoW the whole xattr out in case we are setting them.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
We currently use pagecache to duplicate clusters in CoW,
but it isn't suitable for xattr case. So abstract it out
so that the caller can decide which method it use.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
With the new refcount tree, xattr value can also be refcounted
among multiple files. So return the appropriate extent flags
so that CoW can used it later.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
A reflink creates a snapshot of a file, that means the attributes
must be identical except for three exceptions - nlink, ino, and ctime.
As for time changes, Here is a brief description:
1. Source file:
1) atime: Ignore. Let the lazy atime code handle that.
2) mtime: don't touch.
3) ctime: If we change the tree (adding REFCOUNTED to at least one
extent), update it.
2. Destination file:
1) atime: ignore.
2) mtime: we want it to appear identical to the source.
3) ctime: update.
The idea here is that an ls -l will show the same time for the
src and target - it shows mtime. Backup software like rsync and tar
will treat the new file correctly too.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
2 major functions are added in this patch.
ocfs2_attach_refcount_tree will create a new refcount tree to the
old file if it doesn't have one and insert all the extent records
to the tree if they are not refcounted.
ocfs2_create_reflink_node will:
1. set the refcount tree to the new file.
2. call ocfs2_duplicate_extent_list which will iterate all the
extents for the old file, insert it to the new file and increase
the corresponding referennce count.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
When we truncate a file to a specific size which resides in a reflinked
cluster, we need to CoW it since ocfs2_zero_range_for_truncate will
zero the space after the size(just another type of write).
So we add a "max_cpos" in ocfs2_refcount_cow so that it will stop when
it hit the max cluster offset.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
When we use mmap, we CoW the refcountd clusters in
ocfs2_write_begin_nolock. While for normal file
io(including directio), we do CoW in
ocfs2_prepare_inode_for_write.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
During CoW, if the old extent record is refcounted, we allocate
som new clusters and do CoW. Actually we can have some improvement
here. If the old extent has refcount=1, that means now it is only
used by this file. So we don't need to allocate new clusters, just
remove the refcounted flag and it is OK. We also have to remove
it from the refcount tree while not deleting it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
This patch try CoW support for a refcounted record.
the whole process will be:
1. Calculate how many clusters we need to CoW and where we start.
Extents that are not completely encompassed by the write will
be broken on 1MB boundaries.
2. Do CoW for the clusters with the help of page cache.
3. Change the b-tree structure with the new allocated clusters.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Add 'Decrement refcount for delete' in to the normal truncate
process. So for a refcounted extent record, call refcount rec
decrementation instead of cluster free.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Given a physical cpos and length, decrement the refcount
in the tree. If the refcount for any portion of the extent goes
to zero, that portion is queued for freeing.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Given a physical cpos and length, increment the refcount
in the tree. If the extent has not been seen before, a refcount
record is created for it. Refcount records may be merged or
split by this operation.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Now fs/ocfs2/alloc.c has more than 7000 lines. It contains our
basic b-tree operation. Although we have already make our b-tree
operation generic, the basic structrue ocfs2_path which is used
to iterate one b-tree branch is still static and limited to only
used in alloc.c. As refcount tree need them and I don't want to
add any more b-tree unrelated code to alloc.c, export them out.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Add refcount b-tree as a new extent tree so that it can
use the b-tree to store and maniuplate ocfs2_refcount_rec.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
ocfs2_mark_extent_written actually does the following things:
1. check the parameters.
2. initialize the left_path and split_rec.
3. call __ocfs2_mark_extent_written. it will do:
1) check the flags of unwritten
2) do the real split work.
The whole process is packed tightly somehow. So this patch
will abstract 2 different functions so that future b-tree
operation can work with it.
1. __ocfs2_split_extent will accept path and split_rec and do
the real split work.
2. ocfs2_change_extent_flag will accept a new flag and initialize
path and split_rec.
So now ocfs2_mark_extent_written will do:
1. check the parameters.
2. call ocfs2_change_extent_flag.
1) initalize the left_path and split_rec.
2) check whether the new flags conflict with the old one.
3) call __ocfs2_split_extent to do the split.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Add a new operation eo_ocfs2_extent_contig int the extent tree's
operations vector. So that with the new refcount tree, We want
this so that refcount trees can always return CONTIG_NONE and
prevent extent merging.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Implement locking around struct ocfs2_refcount_tree. This protects
all read/write operations on refcount trees. ocfs2_refcount_tree
has its own lock and its own caching_info, protecting buffers among
multiple nodes.
User must call ocfs2_lock_refcount_tree before his operation on
the tree and unlock it after that.
ocfs2_refcount_trees are referenced by the block number of the
refcount tree root block, So we create an rb-tree on the ocfs2_super
to look them up.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
refcount tree should use its own caching info so that when
we downconvert the refcount tree lock, we can drop all the
cached buffer head.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
In meta downconvert, we need to checkpoint the metadata in an inode.
For refcount tree, we also need it. So abstract the process out.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
trivial: fix typo in aic7xxx comment
trivial: fix comment typo in drivers/ata/pata_hpt37x.c
trivial: typo in kernel-parameters.txt
trivial: fix typo in tracing documentation
trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
trivial: remove unnecessary semicolons
trivial: Fix duplicated word "options" in comment
trivial: kbuild: remove extraneous blank line after declaration of usage()
trivial: improve help text for mm debug config options
trivial: doc: hpfall: accept disk device to unload as argument
trivial: doc: hpfall: reduce risk that hpfall can do harm
trivial: SubmittingPatches: Fix reference to renumbered step
trivial: fix typos "man[ae]g?ment" -> "management"
trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
trivial: fix missing printk space in amd_k7_smp_check
trivial: fix typo s/ketymap/keymap/ in comment
trivial: fix typo "to to" in multiple files
trivial: fix typos in comments s/DGBU/DBGU/
...
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.
I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.
Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?
Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Update ocfs2 specific splicing code to use generic syncing helper. The sync now
does not happen under rw_lock because generic_write_sync() acquires i_mutex
which ranks above rw_lock. That should not matter because standard fsync path
does not hold it either.
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: Jan Kara <jack@suse.cz>
Use the new helper. We have to submit data pages ourselves in case of O_SYNC
write because __generic_file_aio_write does not do it for us. OCFS2 developpers
might think about moving the sync out of i_mutex which seems to be easily
possible but that's out of scope of this patch.
CC: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This enables us to track who does what and print info. Its main use
is catching dirty inodes on the default_backing_dev_info, so we can
fix that up.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: ocfs2_write_begin_nolock() should handle len=0
ocfs2: invalidate dentry if its dentry_lock isn't initialized.
With this commit, extent tree operations are divorced from inodes and
rely on ocfs2_caching_info. Phew!
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We only allow unwritten extents on data, so the toplevel
ocfs2_mark_extent_written() can use an inode all it wants. But the
subfunction isn't even using the inode argument.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_insert_extent() wants to insert a record into the extent map if
it's an inode data extent. But since many btrees can call that
function, let's make it an op on ocfs2_extent_tree. Other tree types
can leave it empty.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_remove_extent() wants to truncate the extent map if it's
truncating an inode data extent. But since many btrees can call that
function, let's make it an op on ocfs2_extent_tree. Other tree types
can leave it empty.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_grow_branch() not really using it other than to pass it to the
subfunctions ocfs2_shift_tree_depth(), ocfs2_find_branch_target(), and
ocfs2_add_branch(). The first two weren't it either, so they drop the
argument. ocfs2_add_branch() only passed it to
ocfs2_adjust_rightmost_branch(), which drops the inode argument and uses
the ocfs2_extent_tree as well.
ocfs2_append_rec_to_path() can be take an ocfs2_extent_tree instead of
the inode. The function ocfs2_adjust_rightmost_records() goes along for
the ride.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
It already gets ocfs2_extent_tree, so we can just use that. This chains
to the same modification for ocfs2_remove_rightmost_path() and
ocfs2_rotate_rightmost_leaf_left().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
It already has struct ocfs2_extent_tree, which has the caching info. So
we don't need to pass it struct inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
It already has struct ocfs2_extent_tree, which has the caching info. So
we don't need to pass it struct inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Get rid of the inode argument. Use extent_tree instead. This means a
few more functions have to pass an extent_tree around.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Pass the ocfs2_extent_list down through ocfs2_rotate_tree_right() and
get rid of struct inode in ocfs2_rotate_subtree_root_right().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Pass struct ocfs2_extent_tree into ocfs2_create_new_meta_bhs(). It no
longer needs struct inode or ocfs2_super.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_find_path and ocfs2_find_leaf() walk our btrees, reading extent
blocks. They need struct ocfs2_caching_info for that, but not struct
inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
extent blocks belong to btrees on more than just inodes, so we want to
pass the ocfs2_caching_info structure directly to
ocfs2_read_extent_block(). A number of places in alloc.c can now drop
struct inode from their argument list.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
What do we cache? Metadata blocks. What are most of our non-inode metadata
blocks? Extent blocks for our btrees. struct ocfs2_extent_tree is the
main structure for managing those. So let's store the associated
ocfs2_caching_info there.
This means that ocfs2_et_root_journal_access() doesn't need struct inode
anymore, and any place that has an et can refer to et->et_ci instead of
INODE_CACHE(inode).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The next step in divorcing metadata I/O management from struct inode is
to pass struct ocfs2_caching_info to the journal functions. Thus the
journal locks a metadata cache with the cache io_lock function. It also
can compare ci_last_trans and ci_created_trans directly.
This is a large patch because of all the places we change
ocfs2_journal_access..(handle, inode, ...) to
ocfs2_journal_access..(handle, INODE_CACHE(inode), ...).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Similar ip_last_trans, ip_created_trans tracks the creation of a journal
managed inode. This specifically tracks what transaction created the
inode. This is so the code can know if the inode has ever been written
to disk.
This behavior is desirable for any journal managed object. We move it
to struct ocfs2_caching_info as ci_created_trans so that any object
using ocfs2_caching_info can rely on this behavior.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We have the read side of metadata caching isolated to struct
ocfs2_caching_info, now we need the write side. This means the journal
functions. The journal only does a couple of things with struct inode.
This change moves the ip_last_trans field onto struct
ocfs2_caching_info as ci_last_trans. This field tells the journal
whether a pending journal flush is required.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We are really passing the inode into the ocfs2_read/write_blocks()
functions to get at the metadata cache. This commit passes the cache
directly into the metadata block functions, divorcing them from the
inode.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We don't really want to cart around too many new fields on the
ocfs2_caching_info structure. So let's wrap all our access of the
parent object in a set of operations. One pointer on caching_info, and
more flexibility to boot.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We want to use the ocfs2_caching_info structure in places that are not
inodes. To do that, it can no longer rely on referencing the inode
directly.
This patch moves the flags to ocfs2_caching_info->ci_flags, stores
pointers to the parent's locks on the ocfs2_caching_info, and renames
the constants and flags to reflect its independant state.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Bug introduced by mainline commit e7432675f8
The bug causes ocfs2_write_begin_nolock() to oops when len=0.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In commit a5a0a63092, when
ocfs2_attch_dentry_lock fails, we call an extra iput and reset
dentry->d_fsdata to NULL. This resolve a bug, but it isn't
completed and the dentry is still there. When we want to use
it again, ocfs2_dentry_revalidate doesn't catch it and return
true. That make future ocfs2_dentry_lock panic out.
One bug is http://oss.oracle.com/bugzilla/show_bug.cgi?id=1162.
The resolution is to add a check for dentry->d_fsdata in
revalidate process and return false if dentry->d_fsdata is NULL,
so that a new ocfs2_lookup will be called again.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/dlm: Wait on lockres instead of erroring cancel requests
ocfs2: Add missing lock name
ocfs2: Don't oops in ocfs2_kill_sb on a failed mount
ocfs2: release the buffer head in ocfs2_do_truncate.
ocfs2: Handle quota file corruption more gracefully
In case a downconvert is queued, and a flock receives a signal,
BUG_ON(lockres->l_action != OCFS2_AST_INVALID) is triggered
because a lock cancel triggers a dlmunlock while an AST is
scheduled.
To avoid this, allow a LKM_CANCEL to pass through, and let it
wait on __dlm_wait_on_lockres().
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Acked-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
There is missing name for NFSSync cluster lock. This makes lockdep unhappy
because we end up passing NULL to lockdep when initializing lock key. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If we fail to mount the filesystem, we have to be careful not to dereference
uninitialized structures in ocfs2_kill_sb.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_do_truncate, we forget to release last_eb_bh which
will cause memleak. So call brelse in the end.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_read_virt_blocks() does BUG when we try to read a block from a file
beyond its end. Since this can happen due to filesystem corruption, it
is not really an appropriate answer. Make ocfs2_read_quota_block() check
the condition and handle it by calling ocfs2_error() and returning EIO.
[ Modified to print ip_blkno in the error - Joel ]
Reported-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
ocfs2: Fix possible deadlock when extending quota file
ocfs2: keep index within status_map[]
ocfs2: Initialize the cluster we're writing to in a non-sparse extend
ocfs2: Remove redundant BUG_ON in __dlm_queue_ast()
ocfs2/quota: Release lock for error in ocfs2_quota_write.
ocfs2: Define credit counts for quota operations
ocfs2: Remove syncjiff field from quota info
ocfs2: Fix initialization of blockcheck stats
ocfs2: Zero out padding of on disk dquot structure
ocfs2: Initialize blocks allocated to local quota file
ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq()
ocfs2: Make global quota files blocksize aligned
ocfs2: Use ocfs2_rec_clusters in ocfs2_adjust_adjacent_records.
ocfs2: Fix deadlock on umount
ocfs2: Add extra credits and access the modified bh in update_edge_lengths.
ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation
ocfs2: Fix error return in ocfs2_write_cluster()
ocfs2: Fix compilation warning for fs/ocfs2/xattr.c
ocfs2: Initialize count in aio_write before generic_write_checks
ocfs2: log the actual return value of ocfs2_file_aio_write()
...
In OCFS2, allocator locks rank above transaction start. Thus we
cannot extend quota file from inside a transaction less we could
deadlock.
We solve the problem by starting transaction not already in
ocfs2_acquire_dquot() but only in ocfs2_local_read_dquot() and
ocfs2_global_read_dquot() and we allocate blocks to quota files before starting
the transaction. In case we crash, quota files will just have a few blocks
more but that's no problem since we just use them next time we extend the
quota file.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Do not exceed array status_map[]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In a non-sparse extend, we correctly allocate (and zero) the clusters between
the old_i_size and pos, but we don't zero the portions of the cluster we're
writing to outside of pos<->len.
It handles clustersize > pagesize and blocksize < pagesize.
[Cleaned up by Joel Becker.]
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_quota_write needs to release the lock if it fails to
read quota block. So use "goto out" instead of "return err".
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Numbers of needed credits for some quota operations were written
as raw numbers. Create appropriate defines instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
syncjiff is just a converted value of syncms. Some places which
are updating syncms forgot to update syncjiff as well. Since the
conversion is just a simple division / multiplication and it does
not happen frequently, just remove the syncjiff field to avoid
forgotten conversions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We just set blockcheck stats to zeros but we should also
properly initialize the spinlock there.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Padding fields of on-disk dquot structure were not zeroed. Zero them
so that it's easier to use them later.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When we extend local quota file, we should initialize data
in newly allocated block. Firstly because on recovery we could
parse bogus data, secondly so that block checksums are properly
computed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In a code path extending local quota files we marked new header
buffer uptodate only after calling ocfs2_journal_access_dq() which
triggers a bug. Fix it and also call ocfs2 variant of the function
marking buffer uptodate.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Change i_size of global quota files so that it always remains aligned to block
size. This is mainly because the end of quota block may contain checksum (if
checksumming is enabled) and it's a bit awkward for it to be "outside" of quota
file (and it makes life harder for ocfs2-tools).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_adjust_adjacent_records, we will adjust adjacent records
according to the extent_list in the lower level. But actually
the lower level tree will either be a leaf or a branch. If we only
use ocfs2_is_empty_extent we will meet with some problem if the lower
tree is a branch (tree_depth > 1). So use !ocfs2_rec_clusters instead.
And actually only the leaf record can have holes. So add a BUG_ON
for non-leaf branch.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In commit ea455f8ab6, we moved the dentry lock
put process into ocfs2_wq. This causes problems during umount because ocfs2_wq
can drop references to inodes while they are being invalidated by
invalidate_inodes() causing all sorts of nasty things (invalidate_inodes()
ending in an infinite loop, "Busy inodes after umount" messages etc.).
We fix the problem by stopping ocfs2_wq from doing any further releasing of
inode references on the superblock being unmounted, wait until it finishes
the current round of releasing and finally cleaning up all the references in
dentry_lock_list from ocfs2_put_super().
The issue was tracked down by Tao Ma <tao.ma@oracle.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In normal tree rotation left process, we will never touch the tree
branch above subtree_index and ocfs2_extend_rotate_transaction doesn't
reserve the credits for them either.
But when we want to delete the rightmost extent block, we have to update
the rightmost records for all the rightmost branch(See
ocfs2_update_edge_lengths), so we have to allocate extra credits for them.
What's more, we have to access them also.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
ocfs2_get_block() does no allocation. Hole filling for writes should
have happened farther up in the call chain. We detect this case and
print an error, but we then continue with the function. We should be
exiting immediately.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
A typo caused ocfs2_write_cluster() to return 0 in some error cases.
Fix it.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
gcc 4.4.1 generates the following build warning on i386:
CC [M] fs/ocfs2/xattr.o
fs/ocfs2/xattr.c: In function ‘ocfs2_xattr_block_get’:
fs/ocfs2/xattr.c:1055: warning: ‘block_off’ may be used uninitialized in this function
The following fix is based on a similar approach by David Howells
few days back: http://lkml.org/lkml/2009/7/9/109,
Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com>,
Signed-off-by: Joel Becker <joel.becker@oracle.com>
generic_write_checks() expects count to be initialized to the size of
the write. Writes to files open with O_DIRECT|O_LARGEFILE write 0 bytes
because count is uninitialized.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
